PhD Thesis

  • Time- and Space-Resolved X-ray Diffraction for Stress Analysis in Semiconductor Devices. / Ziegelwanger, Tobias.
    2025.
  • Impact of Microstructure, Stress and Phase Composition on Hydrogen Permeation in Duplex Steel: A Synchrotron X-ray Diffraction Study. / Pogrielz, Thomas.
    2025.
  • Fabrication and Testing of Microstructures and Composites by Means of Multi-Photon Lithography. / Jelinek, Alexander.
    2025.
  • Development and Characterization of Toxic-element free and Biocompatible Ti-based Metallic Glasses. / Yüce, Eray.
    2025.
  • Mechanical Properties Modification and Design of High Entropy Alloys Studied Based on Molecular Dynamics Simulations. / Xu, Qi.
    2025.
  • Exchange Bias of Nanostructured Materials Processed by Severe Plastic Deformation. / Zawodzki, Michael.
    2025.
  • High Strength Biodegradable Mg-based Materials for Medical Application. / Roostaei, Milad.
    2025.
  • Verbesserung der Bruchzähigkeit spröder Materialien durch den gezielten Einbau von Materialinhomogenitäten. / Brescakovic, Drazen.
    2025.

Conference Papers

Journal Articles

  • Recent Advancements in Bulk Processing of Rare-Earth-Free Hard Magnetic Materials and Related Multiscale Simulations. / Bachmaier, Andrea; Scheiber, Daniel.
    in: Advanced Engineering Materials, 19.12.2025.
  • Harnessing the Power of α-Mg: Unveiling the Matrix Phase’s Role in Magnesium Alloys from Structure to Function. / Chen, Xun; Yuan, Yuan; Zhou, Xiwei et al.
    in: Journal of Magnesium and Alloys, 13.12.2025.
  • Optimization of the Flexible Mesh Support Processing Parameters in Downward Approach Mining Drift by Numerical Simulation. / Liu, Weijun; Li, Kegang; Li, Mingliang et al.
    in: Processes, Jahrgang 13, Nr. 12, 3933, 05.12.2025.
  • Atomic disorder and thermal stability in laser beam-shape-tailored 3D-Printed Zr-based bulk metallic glass under<i> in</i><i>-situ</i> heating during high-energy X-ray diffraction. / Hadibeik, Sepide; Ghasemi-Tabasi, Hossein; Schretter, Lukas et al.
    in: Materials Today Advances, Jahrgang 28, 100617, 12.2025.
  • Role of layer position during thermo-mechanical loading of trilayers. / Cordill, M. J.; Trost, C. O. W.; Husain, S. Altaf et al.
    in: Surface and Coatings Technology, Jahrgang 517, 132767, 01.12.2025.
  • Plastic flow of nanoglass nanowires: Influence of intrinsic heterogeneities and aspect ratio. / Sopu, Daniel; Adjaoud, Omar; Albe, Karsten.
    in: Materials and Design, Jahrgang 260, 114961, 12.2025.
  • The relation of microstructural features to the fatigue crack growth and fracture behavior of a high-speed steel. / Walch, Lukas; Klunsner, Thomas; Marsoner, Stefan et al.
    in: Materials and Design, Jahrgang 260, 114971, 12.2025.
  • Structure-property-bioresponse correlation in Zr-based metallic glasses: from glass-forming ability to corrosion resistance and gene expression. / Sourani, Fereshteh; Ramasamy, Parthiban; Sharifikolouei, Elham et al.
    in: Materials and Design, Jahrgang 260, 115227, 12.2025.
  • Eliminating room-temperature brittleness via introducing residual interface defects to control element diffusion pathways. / You, Yuanqi; Song, Min; Liu, Liyuan et al.
    in: Materials Characterization, Jahrgang 230, 115753, 12.2025.
  • Sub-keV Electron Recoil Calibration for Macroscopic Cryogenic Calorimeters Using a Novel X-ray Fluorescence Source. / Abele, H.; Angloher, G.; Arnold, B. et al.
    in: Journal of Low Temperature Physics, Jahrgang 221, Nr. 1-6, 12.2025, S. 265-288.
  • Hydrogen permeation into duplex steel under compressive and tensile stresses: Symmetric lattice swelling and asymmetric stress redistribution. / Pogrielz, Thomas; Todt, Juraj; Weiser, Adam et al.
    in: Corrosion Science, Jahrgang 257, 113282, 12.2025.
  • Structural Evolution of Nanocrystalline Inconel 718 Metal Matrix Composites Reinforced with Solid Lubricants: An In-Situ High-Temperature XRD Study. / Kasalo, Manoel; Suarez, Sebastian; Nayak, U. Pranav et al.
    in: Journal of Materials Research and Technology, 29.11.2025, S. 9159-9173.
  • From Mechanics to Electronics: Influence of ALD Interlayers on the Multiaxial Electro-Mechanical Behavior of Metal–Oxide Bilayers. / Byloff, Johanna; Devulapalli, Vivek; Casari, Daniele et al.
    in: Advanced Functional Materials, Jahrgang n/a, Nr. n/a, 27.11.2025, S. e26343.
  • Oxygen nanoclustering evades inverse Hall-Petch softening. / Yu, Xiaolong; Bian, Xilei; Liu, Chang et al.
    in: Nature Communications, Jahrgang 16, Nr. 1, 10602, 27.11.2025, S. 10602.
  • Synchronous Biaxial Straining of Foils and Thin Films with In Situ Capabilities. / Pegritz, Michael; Payer, Philipp; Lassnig, Alice et al.
    in: Instruments, Jahrgang 9, Nr. 4, 31, 26.11.2025.
  • Sample preparation induced artefacts in soft SAC solders from uncooled and cooled Argon ion milling. / Cui, Charlotte; Sartory, Bernhard; Tkadletz, Michael et al.
    in: Scientific Reports, Jahrgang 15, Nr. 1, 41275, 21.11.2025, S. 41275.
  • Improved Mechanical Properties of Mg-Ni-Y Alloys via Thermomechanical Processing. / Kalayeh, Parastoo Mahmoud; Malekan, Mehdi; Mirzadeh, Hamed et al.
    in: Metals and Materials International, 18.11.2025.
  • Gradient heterostructure-induced multiscale strengthening mechanisms in ultrafine-grade copper wires. / Jiang, Zhonghan ; Liu , Yahui; Zhang , Guoshang et al.
    in: Jouranl of Alloys and Compounds , Jahrgang 1044, 184426, 05.11.2025.
  • Residual Stress Fields of Precracks and Impact on Fracture Mechanics Properties. / Pippan, Reinhard; Pegritz, Michael; Walch, Lukas et al.
    in: Fatigue and Fracture of Engineering Materials and Structures, Jahrgang 48, Nr. 11, 11.2025, S. 4934-4943.
  • Enhanced ductility by stress confinement in multilayered glassy thin films. / Schretter, Lukas; Sopu, Daniel; Lassnig, Alice et al.
    in: Materials and Design, Jahrgang 259, 114891, 11.2025.
  • Sequential phase evolution of copper mold cast Al-Cu-Ni-(Zr) alloys: Zirconium Micro-alloying results in ultrahigh hardness (∼5 GPa). / Das, Sagar; Maity, Shubhadeep; Barik, Sougata et al.
    in: Materials Characterization, Jahrgang 229, 115515, 11.2025.
  • Crack deflection by design - Utilizing the material inhomogeneity effect on miniaturized additively manufactured structures. / Jelinek, Alexander; Alfreider, Markus; Brescakovic, Drazen et al.
    in: Materials and Design, Jahrgang 259, 114718, 11.2025.
  • Machine-learning-assisted optimization of constitutive modeling and microstructural insights into the hot deformation of L12-strengthened Co33Cr23Ni34Al5Ti5 chemically complex alloys. / Chen, Zhiwei; Zhao, Shunli; Liu, Qi et al.
    in: Materials Characterization, Jahrgang 229, 115586, 11.2025.
  • How austenite improves the fatigue behavior of high-speed steels. / Walch, L.; Klunsner, T.; Hohenwarter, A. et al.
    in: Materials and Design, Jahrgang 259, 114793, 11.2025.
  • Wire-Arc directed energy deposition of metastable-β alloy Ti-15 V-3Cr-3Sn-3Al using thick wire feedstock: Microstructure and mechanical response. / Neves, Jose L.; Wojcik, Tomasz; Obersteiner, David et al.
    in: Materials and Design, Jahrgang 259, 114757, 11.2025.
  • Tailoring microstructure and mechanical properties of sintered Cu nanoparticles. / Du, Leiming; Schaffar, Gerald; Jiao, Weiping et al.
    in: Acta Materialia, Jahrgang 300, 121501, 01.11.2025.
  • Reversible On-Demand Activation of Acid-Catalyzed Dynamic Polymers for Gradient-Driven Reshaping. / Reisinger, David; Wimberger, Laura; Korotkov, Roman et al.
    in: Journal of the American Chemical Society, Jahrgang 147, Nr. 43, 29.10.2025, S. 39671-39680.
  • Investigation of Ti-Based Alloy Composites Produced by High Pressure Torsion. / Ovchinnikova, A.; Sarac, B.; Ketov, S. et al.
    in: Journal of Materials Engineering and Performance, 28.10.2025.
  • Commissioning of the NUCLEUS Experiment at the Technical University of Munich. / NUCLEUS Collaboration.
    in: Physical Review D, Jahrgang 112, Nr. 7, 072013, 28.10.2025.
  • The CRAB facility at the TU Wien TRIGA reactor: status and related physics program. / CRAB Collaboration.
    in: European Physical Journal C, Jahrgang 85, Nr. 10, 1188, 22.10.2025, S. 1188.
  • Effect of Zr on the Microstructure, Friction Coefficient, and Contribution to the Strengthening Mechanisms of Al10Sn4Si1Cu(1Zr) Alloys. / Lucchetta, M. C.; Ramasamy, P.; Saporiti, F. et al.
    in: Metals and Materials International, 17.10.2025.
  • Oxygen and strain co-driven cubic phase in Ti and its mechanical response. / Qu, Qiulin; Huang, Yong; Chen, Zhuo et al.
    in: Acta Materialia, Jahrgang 299, 121442, 15.10.2025.
  • Highly nanotwinned transition metal nitride film enabled by negative stacking fault energy. / Huang, Yong; Chen, Zhuo; Meindlhumer, Michael et al.
    in: Acta Materialia, Jahrgang 299, 121475, 15.10.2025.
  • Effects of nano-CeO<sub>2</sub> particles on the microstructural evolution and tribological performance of laser-deposited Ni45 coatings. / Gao, Shuai; Chai, ChengFang; Hu, ShengHao et al.
    in: Surface and Coatings Technology, Jahrgang 514, 132539, 15.10.2025.
  • Development and characterization of (MnZn) ferrite-polyacrylonitrile composite nanofiber membranes for tissue engineering. / Sarac, Baran; Sharifikolouei, Elham; Micusik, Matej et al.
    in: Emergent Materials, 09.10.2025.
  • Microstructural and temperature-dependent deformation mechanisms governing the cyclic creep of freestanding, submicrometer gold thin films. / Krapf, Anna; Wagner, Tobias; Schretter, Lukas et al.
    in: Materials Science and Engineering: A, Jahrgang 942, 148686, 10.2025.
  • Necessary modification to the Oliver-Pharr method for AFM-indentation. / Zak, Stanislav; Groeger, Julia; Kandeloos, Amirhossein Jalali et al.
    in: Materials and Design, Jahrgang 258, 114640, 10.2025.
  • A 3D interconnected CNT-RGO hybrid networks for Al matrix composites: Unveiling a new pathway to superior strength-ductility balance. / Sadeghi, Behzad; Cavaliere, Pasquale; Velashjerdi, Mohammad et al.
    in: Composites Part B: Engineering, Jahrgang 305, 112746, 10.2025.
  • Strength and ductility synergy of SiC reinforced aluminum matrix composites through interface replacement strategy. / Peng, Yanzhi; Song, Min; Li, Caiju et al.
    in: International Journal of Plasticity, Jahrgang 193, 104450, 10.2025.
  • Thermodynamic and kinetic mechanism of interfacial reactions between several industrial oxide refractory ceramics and Vit 105 amorphous alloy melt. / Zhang, Chaojun; Zhang, Lunyong; Jin, Zhishuai et al.
    in: Ceramics International, Jahrgang 51, Nr. 25, 10.2025, S. 45498-45509.
  • Simultaneously enhancing strength, ductility, and stiffness of lightweight multicomponent Mg-Al-Zn-Cu-Ce alloys. / Gu, Zuo-hong; Zhou, Yun-xuan; Peng, Jia-xing et al.
    in: Transactions of Nonferrous Metals Society of China (English Edition), Jahrgang 35, Nr. 10, 10.2025, S. 3240-3255.
  • On the impact of inhomogeneities on vacancy diffusion controlled void and crack formation in SAC305 solder joints. / Flachberger, Wolfgang; Svoboda, Jiri; Lutz, Peter et al.
    in: Next Materials, Jahrgang 9, 101163, 10.2025.
  • From nano-twinning to the glide of full dislocations: Micropillar compression tests on silicon up to 900<i> °C</i> / Schaffar, Gerald J. K.; Burtscher, Michael; Taylor, Aidan A. et al.
    in: Materials and Design, Jahrgang 258, 114730, 10.2025.
  • Position-dependent variations in cell wall orientation of hardwood branches: Evidence from wide-angle X-ray diffraction. / Nenning, Tobias; Todt, Juraj; Keckes, Jozef et al.
    in: Next Materials, Jahrgang 9, 101347, 10.2025.
  • MnBi phase evolution during magnetic field assisted annealing studied by in-situ high-energy X-ray diffraction. / Bachmaier, Andrea; Weissitsch, Lukas; Wurster, Stefan et al.
    in: Journal of Alloys and Compounds, Jahrgang 1040, 183560, 23.09.2025.
  • Influence of Tramp Elements on Phase Transformations, Microstructure and Hardness of a 0.3 wt.%C Low-Alloyed Steel. / Gocnik, Marek; Hatzenbichler, Lukas; Meindlhumer, Michael et al.
    in: Metals, Jahrgang 15, Nr. 9, 1053, 20.09.2025.
  • Recognizing the Universality of Copper Reconstruction Via Dissolution-Redeposition at the Onset of CO2 Reduction. / Tomc, Blaz; Bele, Marjan; Plut, Matic et al.
    in: Journal of Physical Chemistry Letters, Jahrgang 16, Nr. 36, 11.09.2025, S. 9553-9560.
  • Influence of Cr addition on chromaticity and mechanical properties of solid solution Cu-Ni-Cr alloys with dual-phase structure based on liquid phase separation. / Jeong, Eui Kam; Shinde, Kiran P.; Kang, Gyeol Chan et al.
    in: Journal of Alloys and Compounds, Jahrgang 1039, 183256, 10.09.2025.
  • Achieving Complex Nanostructures: The Role of Hydrogen in Controlling Mechanical Alloying and Microstructure Evolution in the TiVZrNbHf-Cu System. / Schweiger, Lukas; Spieckermann, Florian; Cengeri, Peter et al.
    in: Advanced Science, Jahrgang 12, Nr. 33, 09.2025, S. e07168.
  • Revealing Nanoscale Solute-Rich Clusters in Bulk Metallic Glasses by Atom Probe Tomography. / Nomoto, Keita; Bilal, Huma; Li, Bosong et al.
    in: Small Methods, Jahrgang 9, Nr. 9, 09.2025, S. e00980.
  • Undercooling-governed glass-forming behavior in TiCu-based bulk metallic glass and composite: evolution in local chemical heterogeneity and liquid phase stability. / Hong, Sung Hwan; Ha, Jun Su; Park, Hae Jin et al.
    in: Rare Metals, 01.09.2025.
  • Nanoscale mechanisms limiting non-basal plasticity in magnesium. / Jeong, Jiwon; Xie, Zhuocheng; Alfreider, Markus et al.
    in: Acta Materialia, Jahrgang 296, 121261, 01.09.2025.
  • Nanostructured Metal Oxide from Metallic Glass for Water Splitting: Effect of Hydrothermal Duration on Structure and Performance. / Park, Hae Jin; Kim, Tae Kyung; Eckert, Jurgen et al.
    in: Materials, Jahrgang 18, Nr. 17, 4082, 31.08.2025.
  • Impact of thermal treatment and magnetic field on the dynamic mechanical behavior of polyacrylonitrile nanofibers with embedded magnetic ferrite nanoparticles. / Sarac, Baran; Soprunyuk, Viktor; Yuece, Eray et al.
    in: Materials Advances, Jahrgang 6, Nr. 16, 11.08.2025, S. 5475-5485.
  • Advancing the mechanical performance of chemically complex alloys through strategically engineered bamboo-inspired multi-stage heterostructures. / Cui, Zhenlu; Si, Dekun; Zhang, Jilei et al.
    in: Composites Part B: Engineering, Jahrgang 302, 112547, 01.08.2025.
  • 3D modelling of hydrogen embrittlement in austenitic stainless steel and nickel-based superalloy: Physical metallurgy aspects on hydrogen entrapment. / Sadeghi, Behzad; Cavaliere, Pasquale; Stanislawska, Alicja.
    in: Physics Open, Jahrgang 24, 100253, 08.2025.
  • Energy-state-dependent mechanical and structural heterogeneity in metallic glasses probed by nanoindentation. / Fu, S. Q.; Duan, Y. J.; Tao, K. et al.
    in: International Journal of Mechanical Sciences, Jahrgang 299, 110427, 01.08.2025.
  • Wear and corrosion resistance of a laser powder bed fused AZ91D magnesium matrix composite with TiC reinforcement. / Xi, Lixia; Tian, Songmao; Zhang, Dong et al.
    in: Materials and Design, Jahrgang 256, 114263, 08.2025.
  • Strain rate and temperature dependent viscoplasticity of sintered Cu nanoparticles. / Du, Leiming; Schaffar, Gerald; Poelma, Rene H. et al.
    in: Materials and Design, Jahrgang 256, 114319, 08.2025.
  • Impact of microstructural variations on hydrogen permeation into duplex steel. / Pogrielz, Thomas; Kunnas, Peter; Hoenigmann, Thomas et al.
    in: Materialia, Jahrgang 42, 102475, 08.2025.
  • Oxygen vacancy-induced strengthening and toughening in (K,Na)NbO<sub>3</sub>-based piezoceramics revealed via nanoindentation. / Zhang, Zhidong; Yang, Bin; Chen, Longyu et al.
    in: Nature Communications, Jahrgang 16, Nr. 1, 7015, 31.07.2025, S. 7015.
  • Tailoring rapid thermal synthesis of Pt-based alloy nanoparticles on carbon support for hydrogen evolution reaction. / Zhang, Huanqing; Noisternig, Stefan Manuel; Jiang, Qixiang et al.
    in: International Journal of Hydrogen Energy, Jahrgang 152, 150172, 28.07.2025.
  • Using nanoindentation to study the aging of cellulose acetate in cinematographic films. / Cordill, Megan J.; Zak, Stanislav; Wallaszkovits, Nadja.
    in: Npj Heritage Science, Jahrgang 13, Nr. 1, 364, 25.07.2025.
  • Alteration of Phase Transformation Behavior and Prior Austenite Grain Structure Due to Elevated Tramp Element Concentrations in a Hypoeutectoid Steel. / Hatzenbichler, Lukas; Gocnik, Marek; Haslberger, Phillip et al.
    in: Steel Research International, 22.07.2025.
  • Breaking the trade-off between thermal conductivity and strength of magnesium alloys: Mechanisms and strategies. / Shang, Qi; Tan, Jun; Lv, Hao et al.
    in: Current Opinion in Solid State and Materials Science, Jahrgang 37, 101230, 21.07.2025.
  • Atomic Layer-Deposited Interlayers for Robust Metal-Polymer Interfaces. / Byloff, Johanna; Trost, Claus Othmar Wolfgang; Devulapalli, Vivek et al.
    in: ACS Applied Materials and Interfaces, Jahrgang 17, Nr. 28, 16.07.2025, S. 41224-41236.
  • Tiny Bubbles: Combined HR(S)TEM and 4D-STEM Analysis of Sub-Nanometer He Bubbles in Au. / Mills, Sean H.; Gammer, Christoph; Lin, Alex et al.
    in: Microscopy and Microanalysis, Jahrgang 31, Nr. 4, ozaf072, 15.07.2025.
  • Revealing the Hidden Polysulfides in Solid-State Na-S Batteries: How Pressure and Electrical Transport Control Kinetic Pathways. / Nguyen, Hung Quoc; Kanedal, Mikael Dahl; Todt, Juraj et al.
    in: Journal of the American Chemical Society, Jahrgang 147, Nr. 27, 09.07.2025, S. 23492-23503.
  • Hot deformation behaviors and their constitutive modeling of dual-phase Al<sub>0.6</sub>CrMnFeCoNi high-entropy alloy. / Cheng, Zijian; Wang, Keyan; Sun, Yonggang et al.
    in: Journal of Alloys and Compounds, Jahrgang 1035, 181464, 05.07.2025.
  • Laser powder bed fusion vs. single track laser melting of martensitic Ti-Nb: Phase and microstructure formation. / Senftleben, Florian; Calin, Mariana; Eckert, Jurgen et al.
    in: Additive Manufacturing, Jahrgang 109, 104884, 05.07.2025.
  • Reducibility of high-grade pellets directly reduced in hydrogen atmosphere: Modeling and experimental procedure. / Sadeghi, B.; Cavaliere, P.; Goncalves, N. Ramos et al.
    in: International Journal of Hydrogen Energy, Jahrgang 144, 03.07.2025, S. 69-84.
  • Promising pathways for balancing strength and ductility in chemically complex alloys with medium-to-high stacking fault energies. / Liu, Shanshan; Sun, Tongtong; Kou, Zongde et al.
    in: International Journal of Plasticity, Jahrgang 190, 104358, 07.2025.
  • Expanding Transparent Covalently Attached Liquid-Like Surfaces for Icephobic Coatings with Broad Substrate Compatibility. / Kandeloos, Amirhossein; Eder, Tanja; Hetey, Daniel et al.
    in: Advanced Materials Interfaces, Jahrgang 12, Nr. 13, 07.2025.
  • Achieving strength-ductility synergy in AISI 904L superaustenitic alloy through severe plastic deformation and post-deformation annealing. / Roostaei, Milad; Sohrabi, Mohammad Javad; Wurster, Stefan et al.
    in: Materials Science and Engineering: A, Jahrgang 935, 148382, 07.2025.
  • Exchange Coupling Properties of Ferromagnetic/Antiferromagnetic Bulk Nanocomposites. / Zawodzki, Michael; Krenn, Heinz; Wurster, Stefan et al.
    in: Advanced Engineering Materials, Jahrgang 27, Nr. 13, 07.2025.
  • Tensile plasticity in amorphous microwires: The role of ion irradiation-induced gradient rejuvenation. / Su, Shuang; Lee, Myeong Jun; Ryu, Wook Ha et al.
    in: International Journal of Plasticity, Jahrgang 190, 104371, 07.2025.
  • Crack arrest in nanoceramic multilayers<i> via</i> precipitation-controlled sublayer design. / Kutlesa, K.; Keckes, J.; Daniel, R. et al.
    in: Materials and Design, Jahrgang 255, 114159, 07.2025.
  • Microstructural evolution of C1720W microfilament for fuzz buttons during service. / Zhang, Yanmin; Shan, Yunqi; Yang, Yaopeng et al.
    in: Materials Today Communications, Jahrgang 47, 113224, 07.2025.
  • Oxygen vacancy distribution in different regions of La<sub>1-<i>x</i></sub>Sr<sub><i>x</i></sub>Ga<sub>1-<i>y</i></sub>Mg<sub><i>y</i></sub>O<sub>3-<i>δ</i></sub> / Raznjevic, Sergej; Drev, Sandra; Srsan, Vinko et al.
    in: APL Materials, Jahrgang 13, Nr. 7, 071112, 07.2025.
  • Crack resistance of<i><i> α</i>2|γ</i> and<i> γ</i> |γ interfaces within a TiAl alloy determined by<i> in</i><i> situ</i> nano-fracture experiments. / Burtscher, Michael; Fellner, Simon; Gammer, Christoph et al.
    in: Journal of Materials Research and Technology, Jahrgang 37, 07.2025, S. 3541-3548.
  • Photopolymerization and reaction sintering of ZrC/SiC ultra-high-temperature ceramics fabricated by 3D printing. / Wang, P.; Zhu, S. S.; Zhang, S. P. et al.
    in: Ceramics International, Jahrgang 51, Nr. 18, 07.2025, S. 24583-24595.
  • Intragranular strain and mosaicity in Cu thin films during fast thermomechanical fatigue. / Ziegelwanger, T.; Reisinger, M.; Petersmann, M. et al.
    in: npj Materials Degradation, Jahrgang 9, Nr. 1, 79, 01.07.2025.
  • Formation and influence mechanism of metal vapor on the powder spatter and denudation in laser additive manufacturing of Al alloys. / Xi, Lixia; Li, Zhiming; Qi, Shiwen et al.
    in: Journal of Physics D: Applied Physics, Jahrgang 58, Nr. 24, 245102, 16.06.2025.
  • <i>In</i><i> situ</i> characterization of phase and microstructural evolution during multi-step heat treatment of an additively manufactured tool steel. / Ofner, Nicole; Meindlhumer, Michael; Kunnas, Peter et al.
    in: Journal of Materials Research and Technology, Jahrgang 37, 16.06.2025, S. 2528-2538.
  • Synthesis and Characterization of Mg-Ca-Zn(Sn) Bulk Metallic Glasses and Composites via Melt Spinning Followed by High-Pressure Torsion. / Ramasamy, Parthiban; Badu, Sourav Kumar; Bera, Supriya et al.
    in: Metals and Materials International, 14.06.2025.
  • Effect of cold rolling on the microstructure and plastic deformation behavior of Ti41Zr32Ni6Ta7Be14 metallic glass matrix composites. / Fan, Jing; Yan, Zhijie; Eckert, Jürgen et al.
    in: Journal of Alloys and Compounds, Jahrgang 1032, 181248, 10.06.2025.
  • Controlling mechanical performance and structural homogeneity of large-sized Zr-based bulk metallic glasses via mold temperature regulation. / Jin, Zhishuai; Zhang, Chaojun; Cao, Guanyu et al.
    in: Journal of Materials Research and Technology, Jahrgang 37, 03.06.2025, S. 938-947.
  • Deformation and dynamic recrystallization behavior during hot compression of Incoloy 028 alloy. / Yu, Zhiqiang; Wang, Rui; Tuo, Leifeng et al.
    in: Progress in Natural Science: Materials International, Jahrgang 35, Nr. 3, 06.2025, S. 602-615.
  • Sensing particles under the surface with nanoindentation. / Walch, Lukas; Trost, Claus O. W.; Kutlesa, Kevin et al.
    in: Materials and Design, Jahrgang 254, 114008, 06.2025.
  • Multilayer design of sustainable multifunctional Zr-Cu-N coatings: A route for enhanced mechanical and antibacterial performance. / Daniel, Rostislav; Ziegelwanger, Tobias; Zitek, Michal et al.
    in: Materials and Design, Jahrgang 254, 114037, 06.2025.
  • Deformation behavior and strengthening mechanisms of high-entropy alloys under high strain rate across wide temperature ranges. / Wang, Keyan; Cheng, Zijian; Liu, Changyu et al.
    in: International Journal of Plasticity, Jahrgang 189, 104321, 06.2025.
  • Mechanisms and interactions in the reduction of Fe2O3 by H2/CO mixed gas: Atomic insights from ReaxFF molecular dynamics simulations and experiments. / Cheng, Qiang; Conejo, Alberto N.; Zhang, Jianliang et al.
    in: International Journal of Minerals, Metallurgy and Materials, Jahrgang 32, Nr. 6, 6, 06.2025, S. 1372-1382.
  • Fatigue crack growth of ITER-grade tungsten in the brittle to ductile transition regime. / Pegritz, Michael; Wurster, Stefan; Gschwentner, A et al.
    in: International Journal of Fatigue, 28.05.2025.
  • Cyclization of Polyacrylonitrile Nanofibers Enhanced by Cu<sub>2</sub>O During Electrospinning. / Elbataioui, Adam; Bautista-Anguies, Daniel; Mayer, Barbora et al.
    in: Macromolecules, Jahrgang 58, Nr. 10, 15.05.2025, S. 5254-5261.
  • Phase transformations and metastable states in a Cu-20 m.% Sn alloy: An integrated HEXRD, TEM, and APT investigation. / Lumper-Wimler, Lea A.; Burtscher, Michael; Musi, Michael et al.
    in: Journal of Alloys and Compounds, Jahrgang 1026, 180399, 05.05.2025.
  • Estimate of the driving force for creep crack growth. / Kolednik, O.; Kegl, M.; Gubeljak, N. et al.
    in: Engineering Fracture Mechanics, Jahrgang 319, 111013, 02.05.2025.
  • Grain Rotation and Crack Propagation in Bulge-Tested Gold Films with 4D-STEM. / Gebhart, David D.; Schretter, Lukas; Krapf, Anna et al.
    in: JOM, Jahrgang 77, Nr. 5, 05.2025, S. 3493-3502.
  • Explainable machine learning and feature engineering applied to nanoindentation data. / Trost, C. O. W.; Zak, S.; Schaffer, S. et al.
    in: Materials and Design, Jahrgang 253, 113897, 05.2025.
  • Additive manufacturing of a crack-free tool steel with high C and Cr contents: Microstructure and mechanical properties. / Ofner, Nicole; Bodner, Sabine C.; Meindlhumer, Michael et al.
    in: Materials Characterization, Jahrgang 223, 114919, 05.2025.
  • A Comprehensive Methodological Approach Towards the Micromechanical Characterization of Lead-Free Solder Joints. / Buchebner, Nadine; Keckes, Julius F.; Maier-Kiener, Verena et al.
    in: JOM, Jahrgang 77, Nr. 5, 05.2025, S. 3526-3541.
  • Mechanical properties of two novel non-equiatomic Zr-Hf-Ti-Cu-Ni-Co-Al High Entropy Alloys with high glass forming ability. / Gonzalez, S.; Wurster, S.; Garay-Reyes, C. G. et al.
    in: Journal of Alloys and Compounds, Jahrgang 1024, 180196, 20.04.2025.
  • Thermal affection on hydrogen diffusion in different structures of nickel alloy. / Cavaliere, Pasquale; Sadeghi, Behzad; Chen, Zhenghan et al.
    in: Multidiscipline Modeling in Materials and Structures, Jahrgang 21, Nr. 3, 18.04.2025, S. 592-618.
  • Critical behaviour and magnetocaloric properties of Fe<sub>88</sub>Zr<sub>5</sub>Hf<sub>2</sub>B<sub>4</sub>Cu<sub>1</sub> metallic glass for near-room temperature magnetic refrigeration application. / Vinod, Anjana; Babu, D. Arvindha; Muthuvel, Manivel Raja et al.
    in: Journal of Materials Chemistry C, Jahrgang 13, Nr. 16, 17.04.2025, S. 8228-8237.
  • Effect of TiO2 percentage on the hydrogen-based direct reducibility of high-grade pellets. / Sadeghi, Behzad; Cavaliere, Pasquale; Bayat, Mutlucan et al.
    in: Powder Technology, Jahrgang 455, 120813, 15.04.2025.
  • Hydrogen decelerates fatigue induced grain boundary migration in nanostructured iron. / Kapp, M. W.; Zawodzki, M.; Antoni, M. et al.
    in: Acta Materialia, Jahrgang 288, 120749, 15.04.2025.
  • Intrinsic mechanisms influencing the tensile fracture reliability of CuZr-based amorphous microwires. / Su, Shuang; Liu, Chang-Yu; Su, Xin et al.
    in: Rare Metals, Jahrgang 44, Nr. 4, 04.2025, S. 2682-2694.
  • Enhanced Control of Single Crystalline Ag Dendritic Growth on Al Foil via Galvanic Displacement and Simultaneous Oxidation of D-Glucose. / Rafailović, Lidija D; Noisternig, Stefan M; Bischoff, Jana et al.
    in: Small Science, Jahrgang 5, Nr. 4, 04.2025.
  • Micro-to-nano-scale microstructural evolution and mechanical characteristics of (CrFeNiCu)100-<sub>x</sub>Al<sub>x</sub>high entropy alloys with x=0, 3, 5, 7, 10, 12 and 15 at.%. / Yusupov, Dilshodbek; Hong, Sung Hwan; Abbas, Muhammad Aoun et al.
    in: Journal of Materials Research and Technology, Jahrgang 36, 04.2025, S. 4882-4892.
  • Fatigue Performance of Ti-6Al-4V Processed by Wire-Arc Directed Energy Deposition. / Neves, Jose L.; Papenberg, Nikolaus; Kiener, Daniel et al.
    in: JOM, Jahrgang 77, Nr. 4, 04.2025, S. 1791-1802.
  • Combined X-ray microdiffraction and micromechanical testing for direct measurement of thin film elastic constants. / Janknecht, Rebecca; Hahn, Rainer; Koutna, Nikola et al.
    in: Materials and Design, Jahrgang 252, 113720, 04.2025.
  • Transforming breakfast bio-waste into hydrogen storage materials. / Stock, Sebastian; Trost, Claus Othmar Wolfgang; Seyffertitz, Malina et al.
    in: International Journal of Hydrogen Energy, Jahrgang 114, 31.03.2025, S. 519-533.
  • Strain evolution in La<sub>0.6</sub>Sr<sub>0.4</sub>CoO<sub>3-<i>δ</i> </sub> and SrTi<sub>0.3</sub>Fe<sub>0.7</sub>O<sub>3-<i>δ</i> </sub> multilayer systems. / Raznjevic, Sergej; Drev, Sandra; Bumberger, Andreas E. et al.
    in: Journal of Applied Physics, Jahrgang 137, Nr. 12, 125304, 28.03.2025.
  • Effect of oxidation on mechanical properties of Fe-Ni alloys: Atomic insights from ReaxFF molecular dynamics simulations. / Cheng, Qiang; Conejo, Alberto N.; Zhang, Jianliang et al.
    in: Materials Today Communications, Jahrgang 45, 112248, 18.03.2025.
  • Cooling rate control combined with refractory Mo and/or V addition to enhance the mechanical properties of CoCrFeMnNi alloy. / Gonzalez, S.; Garay-Reyes, C. G.; Martinez-Garcia, A. et al.
    in: Journal of Materials Research and Technology, Jahrgang 36, 11.03.2025, S. 459-469.
  • 3D multi-site hydrogen evolution reaction catalysts on nanoimprinted surfaces, structured via multi-photon lithography derived masks. / Jelinek, Alexander; Neumüller, Daniela; Gammer, Christoph et al.
    in: Materials and Design, Jahrgang 252, 113809, 04.03.2025.
  • Electrochemical impedance behavior and corrosion resistance of amorphous 316-type stainless steel microfibers in saline environment. / Sarac, Baran; Sharifikolouei, Elham; Zheng, Yonghui et al.
    in: Materials Today Communications, Jahrgang 44, 112178, 03.2025.
  • Different strategies towards strength: Unveiling the role of Zn vs Mn/Ca and chitin arrangement in scorpion stingers. / Sakr, C.; Cook, P.; Seiter, M. et al.
    in: Journal of Structural Biology, Jahrgang 217, Nr. 1, 108174, 03.2025, S. 108174.
  • Micromechanical and microstructural effects of high dose helium implantation in single crystal vanadium. / Peddeti, C.; Scott, A.; Hosemann, P. et al.
    in: Journal of Nuclear Materials, Jahrgang 607, 155664, 03.2025.
  • Harvesting superior intrinsic plasticity in nitride ceramics with negative stacking fault energy. / Huang, Yong; Chen, Zhuo; Meindlhumer, Michael et al.
    in: Acta Materialia, Jahrgang 286, 120774, 01.03.2025.
  • Microstructure evolution and corrosion behavior of the Incoloy 028 alloy upon aging. / An, Haoran; Yu, Zhiqiang; Wang, Rui et al.
    in: Corrosion Science, Jahrgang 244, 112634, 03.2025.
  • 20 kHz X-ray diffraction on Cu thin films explores thermomechanical fatigue at high strain-rates. / Ziegelwanger, T.; Reisinger, M.; Vedad, B. et al.
    in: Materials and Design, Jahrgang 251, 113664, 03.2025.
  • Processing of Nanocrystalline Inconel 718—Graphite Composites by High-Pressure Torsion. / Kasalo, Manoel; Suarez, Sebastian; Keckes, Julius et al.
    in: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 28.02.2025.
  • Ultra-high strength of nanocrystalline Inconel 718 composites by high-pressure torsion deformation and graphite reinforcements. / Kasalo, Manoel; Suarez, Sebastian; Fellner, Simon et al.
    in: Materials Science and Engineering: A, 27.02.2025.
  • Phase-separated Zr<sub>70-x</sub>Al<sub>12.5</sub>Fe<sub>17.5</sub>Yx (x=0-25 at.%) metallic glasses with suitable mechanical properties for possible implant applications. / Singh, Devinder; Ramasamy, Parthiban; Jelinek, Anna Sophie et al.
    in: Journal of Materials Research and Technology, Jahrgang 35, 27.02.2025, S. 6468-6484.
  • Extrinsic and intrinsic strength of amorphous olivine films. / Jarnot, Jens; Dohmen, Ralf; Trost, Claus O. W. et al.
    in: European Journal of Mineralogy, Jahrgang 37, Nr. 1, 25.02.2025, S. 91-99.
  • Resolving the fundamentals of the <i>J</i>-integral concept by multi-method in situ nanoscale stress-strain mapping. / Meindlhumer, Michael; Alfreider, Markus; Sheshi, Noel et al.
    in: Communications Materials, Jahrgang 6, Nr. 1, 35, 22.02.2025, S. 35.
  • Optimization of Hydrogen Utilization and Process Efficiency in the Direct Reduction of Iron Oxide Pellets: A Comprehensive Analysis of Processing Parameters and Pellet Composition. / Perrone, Angelo; Cavaliere, Pasquale; Sadeghi, Behzad et al.
    in: Steel Research International, Jahrgang 96, Nr. 2, 02.2025.
  • Mitigating the adverse effect of grain refinement on the ductility of a metastable high-entropy alloy towards superior strength-ductility synergy. / Sohrabi, Mohammad Javad; Sadeghpour, Saeed; Mehranpour, Mohammad Sajad et al.
    in: Applied Materials Today, Jahrgang 42, 102605, 02.2025.
  • Novel ambient-condition solid-state synthesis route of nanocrystalline TiN thin films via spark plasma ablation deposition. / Radovanovic-Peric, Floren; Burtscher, Michael; Panzic, Ivana et al.
    in: Ceramics International, Jahrgang 51, Nr. 5, 02.2025, S. 5576-5582.
  • Nanoscale stress and microstructure gradients across a buckled Mo-Cu bilayer: Cu self-annealing triggered by interface delamination: Cu self-annealing triggered by interface delamination. / Lassnig, A; Todt, J; Tkadletz, M et al.
    in: Acta Materialia, Jahrgang 283, 120465, 15.01.2025.
  • The corrosion behaviors of Inconel 718 fabricated by additive-subtractive hybrid manufacturing in marine environment. / Liu, Changyu ; Lv, Yang ; Su, Shuang et al.
    in: Corrosion Science, 2025.
  • Improved irradiation resistance of high entropy nanolaminates through interface engineering. / Xu, Qi; Eckert, Jürgen; Sopu, Daniel.
    in: Materials Futures, 2025.
  • Structural response of defect-free and pre-cracked high-entropy metallic glasses to ion irradiation. / Xu, Qi; Sopu, Daniel; Eckert, Jürgen.
    in: Journal of Materials Research and Technology, 2025.
  • Effect of reinforcement particle size on the corrosion and mechanical properties of spark plasma sintered aluminium matrix composites. / Sadeghi, Behzad; Cavaliere, Pasquale; Sanayei, Mohsen.
    in: Journal of Microscopy, Jahrgang 297, Nr. 1, 01.2025, S. 18-34.
  • Improving the mechanical performance of FeCoNi compositionally complex alloys through Al and V additions: Optimizing phase stability and microstructure. / Liu, Xiaoming.
    in: Materials Science and Engineering: A, 2025.
  • Workflow for a reproducible and accurate determination of free volume in metallic glasses by differential scanning calorimetry. / Fellner, Simon; Spieckermann, Florian; Eckert, Jurgen et al.
    in: Journal of Materials Research and Technology, Jahrgang 39, 2025, S. 3258-3269.
  • Direct observation of Schottky-vacancy clusters and their mechanical response in MoN/TiN superlattice. / Chen, Zhuo; Huang, Yong; Gao, Zecui et al.
    in: Acta Materialia, Jahrgang 283, Nr. 120551, 2025.
  • Functionalization of FeCoNiCu medium entropy alloy via nitridation and anodic oxidation for enhanced oxygen evolution and glycerol oxidation. / Suhadolnik, Luka; Smiljanic, Milutin; Bele, Marjan et al.
    in: Journal of Electrochemical Science and Engineering, Jahrgang 15, Nr. 1, 2025.
  • Reliable Atom Probe Tomography of Cu Nanoparticles Through Tailored Encapsulation by an Electrodeposited Film. / Cicek, Aydan; Knabl, Florian; Schiester, Maximilian et al.
    in: Nanomaterials, Jahrgang 15, Nr. 1, 43, 01.2025.
  • Investigation of the tensile failure mechanism of 316L steel produced by selective laser melting after different heat treatments. / Kononenko , G.A.; Ramasamy, Parthiban; Eckert, Jürgen et al.
    in: Physicochemical Mechanics of Materials, Jahrgang 61, Nr. 5, 2025, S. 49-57.
  • Strong high-density composites from wheat straw. / Neudecker, Felix; Veigel, Stefan; Bodner, Sabine C. et al.
    in: Composites Part A: Applied Science and Manufacturing, Jahrgang 188, 108533, 01.2025.
  • Polyacrylonitrile nanofibers with hollow NiCu, Ni, and Cu nanospheres: Boosting electrocatalysis via enhanced interfacial charge transport and storage. / Sarac, Baran; Karazehir, Tolga; Zadorozhnyy, Vladislav et al.
    in: Journal of Materials Research and Technology, Jahrgang 41, 2025, S. 363-374.

Master Thesis

  • Fracture Mechanics Characterization of Rotating Anode Components. / Reindl, Philipp.
    2025.

Other

  • Observation of two nuclear recoil peaks induced by neutron capture on Al2O3. / Abele, H.; Ajello, P.; Arnold, B. et al.
    2025.
  • #2 Hilfe! Ich brauche Strom im Mittelalter! Hiccup. Per Schluckauf durch die Zeit.Schweiger, Lukas (Autor:in); Trost, Claus (Autor:in); Tobias, Bendeguz (Autor:in). 2025.