PhD Thesis
PhD Thesis
- Impactverhalten und Schadenstoleranz ausgewahlter ƒÁ-TiAl Legierungen
(2023) - High Pressure Torsion Deformation of Nanocarbon-reinforced Metal Matrix Composites
(2019) - Implementation of femtosecond laser processing for materials testing and research
(2019) - Thermodynamic Stability and Mechanical Properties of Nanocrystalline High-entropy Alloys
(2018) - Simulation von Rissen in höchstfesten Stahlblechen mit einem Trefftz-Element für Mixed-Mode-Beanspruchungen
Fortschritt-Berichte VDI (2018) - Fracture toughness and microstructural stability of heavily deformed tungsten materials
(2018) - Processing - Structure - Property Relationships in Selected Iron-Based Nanostructures"
(2018) - Bulk metallic glass composites fabricated via high pressure torsion
(2018) - Atomic-scale characterization of severely deformed nanocrystalline alloys
(2018) - Advanced Nanoindentation Techniques for the Extraction of Material Flow Curves
(2018) - "Mechanical and Interfacial Integrity of Metal-Polymer Multilayer Systems"
(2017) - Depth resolved stress gradient and dislocation analyses in III-N multilayer structures
(2017) - "The Role of Interfaces in BCC Metal Plasticity Across Length-Scales and Temperatures"
(2017) - "Structural and Mechanical Gradients in Nanostructured Thin Films"
(2017) - "Damage Tolerant Design Concepts for the Application of High Strength Materials in Railways Switch Components"
(2017) - Application of the Configurational Forces Concept for the Design of Tough, Strong and Damage-tolerant Composites
(2017) - Structural Instabilities in Nanostructured Metals
(2017) - Thermo-mechanical Behaviour of Thick Copper Metallizations for Power Electronics
(2017) - Residual Stresses and Crack Growth in Microelectronic Thin Films
(2017) - Fatigue crack growth of noncrystalline and ultrafine-grained metals processed by severe plastic deformation
(2017) - Deformation-induced supersaturation of immiscible binary systems
(2016) - Combcrack Generation in PVD Coated Hardmetal Milling Inserts
(2016) - Nanoscale Investigations of Performance-critical Regions in Non-homogeneous Metallic and Ceramic Thin Films
(2016) - Bruchverhalten von Fe - Si - Al Stählen
(2016) - Rissfortschritt in duktilen Stählen unter zyklischer Belastung: Einfluss des Herstellungsverfahrens und der Lastgeschichte
(2015) - Recovery phenomena in severely deformed metals
(2015) - Characterization of crack growth with the configurational force concept
(2015) - Combined atomic force and electron microscopy instrumentation to study microscale plasticity
(2015) - TEM Investigations on Interactions of Dislocations with Boundaries
(2015)
Conference Papers
Conference Papers
- Biomimetic Design Concepts for the Pipe Architecture of Tomorrow
, 1-8 (2018) - Influence of Secondary Phase on Intrinsic Threshold and Path of Shear-Mode Fatigue Cracks in Metals
Acta Phys. Pol. A, 134, 699-702 (2018) - Design and development of MEMS-based structures for in-situ characterization of thermo-mechanical behaviour of thin metal films
Microelectron. Reliab., 88-90, 829-834 (2018) - High electrocatalytic performance of a graphene-supported PtAu nanoalloy for methanol oxidation
Int. J. Hydrog. Energy, 43, 12803-12810 (2018) - Sub 25 nm focusing with a long working distance using multilayer Laue lenses
J. Instrum., 13, ARTN C04011 (2018) - Fatique Crack-Growth Properties of SPD-Metals
Proceedings of the First International Conference on Theoretical, Applied and Experimental Mechanics, 347-349 (2018) - Synthesis and Properties of Bulk Metallic Glass Composites
Proceedings of the First International Conference on Theoretical, Applied and Experimental Mechanics, 333-335 (2018) - Structure Modulation and Nanocrystallization of Metallic Glasses: How to Tune Mechanical Properties
, 352-353 (2018) - Nanodiffraction Strain Mapping of Metallic Glasses During In Situ Deformation
Proceedings of the First International Conference on Theoretical, Applied and Experimental Mechanics (2018) - Plasticity Enhancement of Composite and Nanoscaled Metallic Glasses
Forschungszentrum Jülich GmbH, ed. NIC Symposium 2018, 281-288 (2018) - Laser Ultrasonic Thin Film Characterization of Si-Cu-Al-Cu Multi-Layered Stacks
Materials Today: Proceedings, 4, 7122-7127 (2017) - Evolution of the microstructure in carbon nanotube reinforced Nickel matrix composites processed by high-pressure torsion
, ARTN 012008 (2017) - Finite element modeling of the residual stress evolution in forged and direct-aged alloy 718 turbine disks during manufacturing and its experimental validation
, ARTN 070001 (2017) - Pt nanoparticles modified Au dendritic nanostructures: Facile synthesis and enhanced electrocatalytic performance for methanol oxidation
Int. J. Hydrog. Energy, 42, 22100-22107 (2017) - Micro-Mechanical In Situ Measurements in Thin Film Systems Regarding the Determination of Residual Stress, Fracture Properties and Interface Toughness
, 750-751 (2017) - Strength and ductility of heavily deformed pearlitic microstructures
, ARTN 012003 (2017) - Role of interfaces on microstructure refinement and mechanical properties of severe plastically deformed copper and copper-silver eutectic
, ARTN 012021 (2017) - From an understanding of structural restoration mechanisms towards a selective processing of extreme nanolamellar structures
(2017) - Crack closure and retardation effects – experiments and modelling
Procedia Structural Integrity, 4, 19-26 (2017) - Experimental evidence of a common local mode II growth mechanism of fatigue cracks loaded in modes II, III and II plus III in niobium and titanium
Int. J. Fatigue, 92, 470-477 (2016) - Investigation of Ni-B Alloys for Joining of TiB2 Ultra-High-Temperature Ceramic
J. Mater. Eng. Perform., 25, 3204-3210 (2016) - Tailoring the mechanical and magnetic properties of nanocrystalline materials by decomposition of metastable solid solutions
(2016) - Auger and X-ray photoelectron spectroscopy on lithiated HOPG
Surf. Interface Anal., 48, 501-504 (2016) - Determination of crack initiation and crack growth stress-life curves by fracture mechanics experiments and statistical analysis
, 3026-3039 (2016) - Fracture and Material Behavior of Thin Film Composites
(2016) - Fabrication of Cu-Al-Ni-Mn Shape-Memory Parts by Selective Laser Melting
(2016) - Recent advances in research in severe plastic deformation in Leoben
(2016) - Design of fracture resistant composites by utilizing spatial material property variations
(2015) - Physically correct assessment of fatigue crack growth in elastic–plastic materials with the J-integral
(2015) - Phase decomposition and nano structure evolution of metastable nanocrystalline Cu-Co solid solutions during thermal treatment
IOP PUBLISHING LTD, ed. (2015) - Hardening by annealing: insights from different alloys
IOP PUBLISHING LTD, ed. (2015)
Journal Articles
Journal Articles
- Influence of Mo micro-particles on crack formation, microstructure, and mechanical behaviour of laser powder bed fusion fabricated CuZrAl bulk metallic glass composites
VIRTUAL PHYS PROTOTY, 18, ARTN e2224307 (2023) - Atomic structure, thermal stability and isothermal crystallization kinetics of novel Co-based metallic glasses with excellent soft magnetic properties
J ALLOY COMPD, 963, ARTN 171271 (2023) - Investigation of the tribological behavior of the additively manufactured TiC-based cermets by scratch testing
J ALLOY COMPD, 959, ARTN 170496 (2023) - STZ-Vortex model: The key to understand STZ percolation and shear banding in metallic glasses
J ALLOY COMPD, 960, ARTN 170585 (2023) - Synthesis of hard magnetic & alpha;-MnBi phase by high pressure torsion and field assisted annealing
J MAGN MAGN MATER, 584, ARTN 171082 (2023) - Al-doped ZnO-coated LiCoO2 thin-film electrode: Understanding the impact of a coating layer on the degradation mechanism
J POWER SOURCES, 580, ARTN 233451 (2023) - Microstructural evolution and mechanical properties of 6Cr13 martensitic stainless steel subjected to cold rolling and heat treatments
MATER CHARACT, 203, ARTN 113070 (2023) - Assessment of different processing strategies to fabricate bulk Mg-Fe nanocomposites
Journal of Alloys and Metallurgical Systems, 4, 100034 (2023) - A new design rule for high entropy alloy diffusion barriers in Cu metallization
J ALLOY COMPD, 953, ARTN 170166 (2023) - Synergistic enhancement of hydrogen interactions in palladium-silicon-gold metallic glass with multilayered graphene
J MATER CHEM A (2023) - Self-ignition of amorphous alloys activated by exothermic crystallization
COMBUST FLAME, 254, ARTN 112841 (2023) - High density of stacking faults strengthened TaN/TiN multilayer
ACTA MATER, 255, ARTN 119027 (2023) - Tailoring microstructures and mechanical properties of lightweight refractory Ti22Sc22Zr22Nb17V17 multi-phase high-entropy alloys by hot extrusion and annealing
MATER CHARACT, 202, ARTN 113025 (2023) - Toxic element-free Ti-based metallic glass ribbons with precious metal additions
MATER TODAY ADV, 19, ARTN 100392 (2023) - In situ fragmentation of Al/Al2O3 multilayers on flexible substrates in biaxial tension
MATER DESIGN, 232, ARTN 112081 (2023) - Impact of microstructure on the performance of WRe10 conversion layers for stationary and rotating anodes
INT J REFRACT MET H, 114, ARTN 106244 (2023) - Photoinduced edge-specific nanoparticle decoration of two-dimensional tungsten diselenide nanoribbons
COMMUN CHEM, 6, ARTN 166 (2023) - Short-range order patterns in Mg66Zn29Ca5 metallic glass: Phase transformations and crystallization kinetics
J NON-CRYST SOLIDS, 613, ARTN 122390 (2023) - Effect of electrolyte composition on the surface characteristics of plasma electrolytic oxidation coatings over Ti-40Nb alloy
SURF COAT TECH, 465, ARTN 129591 (2023) - Correlation of metal-to-insulator transition and strain state of VO2 thin films on TiO2 (110) substrates
APPL PHYS LETT, 123, ARTN 042103 (2023) - Parameters influencing the fracture of Mo films and their wider significance
MRS ADVANCES (2023) - Hydrogen Evolution Reaction on Ultra-Smooth Sputtered Nanocrystalline Ni Thin Films in Alkaline Media-From Intrinsic Activity to the Effects of Surface Oxidation
NANOMATERIALS, 13, ARTN 2085 (2023) - Characterization of Gas-Atomized Equiatomic AlCoCrFeNi Powder for Additive Manufacturing
METALL MATER TRANS A (2023) - Precise determination of Young's modulus of amorphous CuZr/nanocrystalline Cu multilayer via nanoindentation
J MATER RES, 38, 3324-3335 (2023) - Measurement of residual stresses in surrogate coated nuclear fuel particles using ring-core focussed ion beam digital image correlation
Nuclear Materials and Energy, 101470 (2023) - Effect of wire-arc directed energy deposition on the microstructural formation and age-hardening response of the Mg-9Al-1Zn (AZ91) alloy
Journal of Magnesium and Alloys, 1944-1958 (2023) - Defect Chemistry of Spinel Cathode Materials A Case Study of Epitaxial LiMn2O4 Thin Films
CHEM MATER (2023) - Effect of boron doping on grain boundary cohesion in technically pure molybdenum investigated via meso-scale three-point-bending tests
INT J REFRACT MET H, 113, ARTN 106173 (2023) - Mechanical behavior of CuZrAl metallic glass scaffolds fabricated by selective laser melting
MATER LETT, 341, ARTN 134242 (2023) - Solving the problem of solidification cracking during additive manufacturing of CrMnFeCoNi high-entropy alloys through addition of Cr3C2 particles to enhance microstructure and properties
MATER TODAY ADV, 18, ARTN 100371 (2023) - Soft Magnetic Properties and Electromagnetic Shielding Performance of Fe40Ni40B20 Microfibers
ADV ELECTRON MATER (2023) - Substantially enhanced homogeneous plastic flow in hierarchically nanodomained amorphous alloys
NATURE COMMUNICATIONS, 14, ARTN 3670 (2023) - Crystal-Orientation-Dependent Oxygen Exchange Kinetics on Mixed Conducting Thin-Film Surfaces Investigated by In Situ Studies
ACS APPL ENERG MATER, 6, 6712-6720 (2023) - Tailoring hierarchical microstructures to improve the strength and plasticity of a laser powder bed fusion additively manufactured Ti-6Al-4V alloy
ADDIT MANUF, 71, ARTN 103603 (2023) - On the stability of Ti(Mn,Al)2 C14 Laves phase in an intermetallic Ti–42Al–5Mn alloy
Intermetallics, 107962 (2023) - Electron beam-induced brownmillerite-perovskite phase transition in La0.6Sr0.4CoO3-delta
APPL PHYS LETT, 122, ARTN 211903 (2023) - Microstructural influences on fatigue threshold behavior and fracture toughness of an additively manufactured gamma-titanium aluminide
INTERMETALLICS, 156, ARTN 107852 (2023) - Link between cracking mechanisms of trilayer films on flexible substrates and electro-mechanical reliability under biaxial loading
J VAC SCI TECHNOL A, 41, ARTN 033403 (2023) - Small-scale fracture mechanical investigations on grain boundary doped ultrafine-grained tungsten
ACTA MATER, 250, ARTN 118878 (2023) - Deformation behavior of metallic lattice structures with symmetrical gradients of porosity manufactured by metal additive manufacturing
VACUUM, 211, ARTN 111955 (2023) - Failure analysis of Al2O3-C-SiO2 slide gate plates during continuous casting based on numerical simulation
J MATER RES TECHNOL, 24, 6107-6117 (2023) - Effects of void shape and location on the fracture and plastic deformation of Cu (crystalline) /Cu64Zr36 (amorphous) composites
J MATER RES TECHNOL, 24 (2023) - Time-Resolved Corrosion Behavior of Transition-Metal-Based High-Entropy Alloy in Saline and Phosphate Buffer Solutions
METALS, 13, ARTN 951 (2023) - Anneal hardening in single phase nanostructured metals
MATER TRANS, 2023, 1-10 (2023) - Synergistic Strengthening Mechanisms of Dual-Phase (TiN plus AlN) Reinforced Aluminum Matrix Composites Prepared by Laser Powder Bed Fusion
3D PRINT ADDIT MANUF (2023) - SPD deformation of pearlitic, bainitic and martensitic steels
MATER TRANS, 2023, 1-11 (2023) - Effect of pulse-current-based protocols on the lithium dendrite formation and evolution in all-solid-state batteries
NATURE COMMUNICATIONS, 14, ARTN 2432 (2023) - Fatigue crack growth behavior of a nanocrystalline low Young's modulus beta-type Ti-Nb alloy
MAT SCI ENG A-STRUCT, 871, ARTN 144868 (2023) - Deformation-induced homogenization of the multi-phase senary high-entropy alloy MoNbTaTiVZr processed by high-pressure torsion
MAT SCI ENG A-STRUCT, 871, ARTN 144923 (2023) - Magnetic Materials via High-Pressure Torsion of Powders
MATER TRANS, 2023, 1-14 (2023) - Microstructure formation and mechanical performance of micro-nanoscale ceramic reinforced aluminum matrix composites manufactured by laser powder bed fusion
J ALLOY COMPD, 939, ARTN 168803 (2023) - Enhancement of hydrogen storage properties from amorphous Mg85Ni5Y10 alloy
J NON-CRYST SOLIDS, 605, ARTN 122167 (2023) - Lower hardness than strength: The auxetic composite microstructure of limpet tooth
Acta Biomaterialia, 447-453 (2023) - Additive manufacturing of CMCs with bimodal microstructure
J ALLOY COMPD, 938, ARTN 168416 (2023) - Additively manufactured equiatomic CoCrFeMnNi high entropy alloy: Precipitation-induced heterogeneity by mechano-chemical coupling
J ALLOY COMPD, 938, ARTN 168514 (2023) - Styrene-butadiene-styrene-based stretchable electrospun nanofibers by carbon nanotube inclusion
MOL SYST DES ENG, 2023, 1-10 (2023) - Strong and ductile titanium via additive manufacturing under a reactive atmosphere
MATER TODAY ADV, 17, ARTN 100347 (2023) - Describing mechanical damage evolution through in situ electrical resistance measurements
J VAC SCI TECHNOL A, 41, ARTN 023408 (2023) - Molecular dynamics study of shock-induced deformation phenomena and spallation failure in Ni-based single crystal superalloys
INT J PLASTICITY, 162, ARTN 103539 (2023) - Ferromagnetic order controlled by the magnetic interface of LaNiO3/La2/3Ca1/3MnO3 superlattices
SCI REP-UK, 13, 1-10 (2023) - Effect of scanning strategy on microstructure and texture evolution in a selective laser melted Al-33Cu eutectic alloy
J ALLOY COMPD, 936, ARTN 168098 (2023) - Deformation and fatigue behaviour of additively manufactured Scalmalloy® with bimodal microstructure
International Journal of Fatigue, 107592 (2023) - Deformation Induced Structure and Property Changes in a Nanostructured Multiphase CrMnFeCoNi High-Entropy Alloy
NANOMATERIALS, 13, ARTN 924 (2023) - Effect of NiCoFeAlTi high entropy intermetallic reinforcement particle size on the microstructure and mechanical properties of CoCrFeMnNi high-entropy alloy composites fabricated by selective laser melting
J ALLOY COMPD, 947, ARTN 169417 (2023) - Microstructure evolution and mechanical properties of functionally graded Fe-8Cr-xNi alloys fabricated by spark plasma sintering
MAT SCI ENG A-STRUCT, 866, ARTN 144648 (2023) - Elucidating the effects of cold rolling route on the mechanical properties of AISI 316L austenitic stainless steel
MAT SCI ENG A-STRUCT, 865, ARTN 144616 (2023) - Hierarchical microstructures and strengthening mechanisms of nano-TiC reinforced CoCrFeMnNi high-entropy alloy composites prepared by laser powder bed fusion
J MATER SCI TECHNOL, 136, 245-259 (2023) - A novel crack-free and refined 2195-Ti/CeB6 composites prepared by laser powder bed fusion
MATER LETT, 333, ARTN 133572 (2023) - Special Issue "Novel Structural and Functional Material Properties Enabled by Nanocomposite Design "
NANOMATERIALS, 13, ARTN 586 (2023) - Peripherally and non-peripherally carboxylic acid substituted Cu(ii) phthalocyanine/reduced graphene oxide nanohybrids for hydrogen evolution reaction catalysts
MOL SYST DES ENG (2023) - Strength determination for rough substrate-coating interfaces with three-dimensional defect structure
International Journal of Refractory Metals and Hard Materials, 106149 (2023) - Can Severe Plastic Deformation Tune Nanocrystallization in Fe-Based Metallic Glasses?
MATERIALS, 16, ARTN 1260 (2023) - Pd-based Metallic Glasses as Promising Materials for Hydrogen Energy Applications
J ELECTROCHEM SOC, 170, ARTN 014503 (2023) - Exchange Bias Demonstrated in Bulk Nanocomposites Processed by High-Pressure Torsion
NANOMATERIALS, 13, ARTN 344 (2023) - Surface Chemistry and Degradation Processes of Dense La0.6Sr0.4CoO3-delta Thin Film Electrodes
J ELECTROCHEM SOC, 170, ARTN 014501 (2023) - Circumventing Solidification Cracking Susceptibility in Al-Cu Alloys Prepared by Laser Powder Bed Fusion
3D PRINT ADDIT MANUF (2022) - Phase Transformation Induced by High Pressure Torsion in the High-Entropy Alloy CrMnFeCoNi
MATERIALS, 15, ARTN 8407 (2022) - Decomposition-resistant carbonitride precipitates in X30CrMoN15-1 high-nitrogen bearing steel deformed by high-pressure torsion
Materials Science & Engineering A, 144529 (2022) - Surface Topography and Biocompatibility of cp-Ti Grade2 Fabricated by Laser-Based Powder Bed Fusion: Influence of Printing Orientation and Surface Treatments
ADV ENG MATER, 2022, 2201073 (2022) - Probing the stability, adhesion strength, and fracture mechanism of Mg/ Al2Y interfaces via first-principles calculations
MATERIALS TODAY COMMUNICATIONS, 33, ARTN 104612 (2022) - Selective laser melting of in-situ CoCrFeMnNi high entropy alloy: Effect of remelting
J. Manuf. Process., 84, 55-63 (2022) - Reactive interdiffusion of an Al film and a CoCrFeNi high-entropy alloy at elevated temperatures
Intermetallics, 1-11 (2022) - Enhanced mechanical performance of gradient-structured CoCrFeMnNi high-entropy alloys induced by industrial shot-blasting
RARE METALS, 1-10 (2022) - Iron oxide - poly(m-anthranilic acid)-poly(e-caprolactone) electrospun composite nanofibers: fabrication and properties
MOL SYST DES ENG (2022) - In situ electrochemical observation of anisotropic lattice contraction of La0.6Sr0.4FeO3-delta electrodes during pulsed laser deposition
PHYS CHEM CHEM PHYS, 25, 142-153 (2022) - Electromechanical Behavior of Al/Al2O3 Multilayers on Flexible Substrates: Insights from In Situ Film Stress and Resistance Measurements
ADV ENG MATER, 1-15 (2022) - Optimal tensile properties of laser powder bed fusion hereditary basket-weave microstructure in additive manufactured Ti6Al4V
Addit. Manuf., 59, ARTN 103092 (2022) - Local microstructural evolution and the role of residual stresses in the phase stability of a laser powder bed fused cold-work tool steel
Mater. Charact., 193, ARTN 112318 (2022) - New-generation biocompatible Ti-based metallic glass ribbons for flexible implants
Mater. Des., 223, ARTN 111139 (2022) - Improvement of hardness in Ti-stabilized austenitic stainless steel
MATER DESIGN, 223, ARTN 111242 (2022) - Microstructure and Tribological Behavior of Fe-Based Amorphous Alloy Fabricated by Plasma Spraying and Laser Remelting
T INDIAN I METALS, 2022, 1-8 (2022) - Fiber Laser Welded Cobalt Super Alloy L605: Optimization of Weldability Characteristics
MATERIALS, 15, ARTN 7708 (2022) - Mechanical Properties and Microstructural Evolution of Ti-25Nb-6Zr Alloy Fabricated by Spark Plasma Sintering at Different Temperatures
METALS, 12, ARTN 1824 (2022) - Direct Formation of Hard-Magnetic Tetrataenite in Bulk Alloy Castings
ADVANCED SCIENCE, 2204315, 1-8 (2022) - Importance of the micro-lattice structure of selective laser melting processed Mo/Mo(x)S(x+1) composite: Corrosion studies on the electrochemical performance in aqueous solutions
MATER TODAY CHEM, 26, ARTN 101219 (2022) - Microstructure and Nanoindentation Creep Behavior of Binary Al-Cu Alloy Synthesized at High Pressure
JOM, 12345, 1-8 (2022) - Effect of a single overload on the cyclic R-curve behaviour of a gamma-TiAl TNM alloy
Int. J. Fatigue, 163, ARTN 107083 (2022) - Effect of powder bed preheating on the crack formation and microstructure in ceramic matrix composites fabricated by laser powder-bed fusion process
Addit. Manuf., 58, ARTN 103013 (2022) - MEMS-Based in situ electron-microscopy investigation of rapid solidification and heat treatment on eutectic Al-Cu
Acta Mater., 239, ARTN 118225 (2022) - Designing lightweight multicomponent magnesium alloys with exceptional strength and high stiffness
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 855, ARTN 143901 (2022) - Enhancement in strength and thermal stability of selective laser melted Al-12Si by introducing titanium nanoparticles
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 855, ARTN 143833 (2022) - Fatigue of copper films subjected to high-strain rate thermo-mechanical pulsing
Microelectron. Reliab., 137, ARTN 114782 (2022) - Crack Formation and Control in an AlCoCrFeNi High Entropy Alloy Fabricated by Selective Laser Melting
3D PRINT ADDIT MANUF, 2022, 1-12 (2022) - Electroless Ni-P-MoS2-Al2O3 Composite Coating with Hard and Self-Lubricating Properties
MATERIALS, 15, ARTN 6806 (2022) - Crack propagation resistance of TiAl alloys
MRS Bull., 47, 1-8 (2022) - Ti6Al4V Coating on 316L Substrate by Laser-based Fusion Process
Trans. Indian Inst. Met., 124, 1-10 (2022) - Influence of the 1% Ti content on microstructure, friction coefficient and contribution to the strengthening mechanisms in the Al20Sn1Cu alloy
RESULTS IN ENGINEERING, 15, ARTN 100506 (2022) - Precipitation-based grain boundary design alters Inter- to Trans-granular Fracture in AlCrN Thin Films
Acta Mater., 237, ARTN 118156 (2022) - Interface-related deformation phenomena in metallic glass/high entropy nanolaminates
Acta Mater., 237, ARTN 118191 (2022) - Influence of Processing Route on the Fracture Resistance of Equal Channel Angular Pressing Deformed Iron
Adv. Eng. Mater., 2201011, ARTN 2201011 (2022) - A measurement structure for in-situ electrical monitoring of cyclic delamination
Surf. Coat. Technol., 445, ARTN 128715 (2022) - High-Entropy Alloy-Induced Metallic Glass Transformation: Challenges Posed by in situ Alloying via Additive Manufacturing
Adv. Eng. Mater., 220764, ARTN 2200764 (2022) - Effect of Wear Debris Entrapment on the Tribological Performance of AlCoCrFeNi Produced by Selective Laser Melting or Spark Plasma Sintering
Metall. Mater. Trans. A-Phys. Metall. Mater. Sci., 12345, 1-7 (2022) - Prior beta grain evolution and phase transformation of selective laser melted Ti6Al4V alloy during heat treatment
J. Alloy. Compd., 914, ARTN 165235 (2022) - Carbon nanotube-polybutadiene-poly(ethylene oxide)-based composite fibers: Role of cryogenic treatment on intrinsic properties
Polym. Adv. Technol., 5828, 1-11 (2022) - Conditions near a crack tip: Advanced experiments for dislocation analysis and local strain measurement
MRS Bull., 47, 1-8 (2022) - Mechanical Property Evaluation of CuNb Composites Manufactured with High-Pressure Torsion
JOM, 123, 1-10 (2022) - Magnetron Sputtered Non-Toxic and Precious Element-Free Ti-Zr-Ge Metallic Glass Nanofilms with Enhanced Biocorrosion Resistance
Adv. Mater. Interfaces, 123, ARTN 2201223 (2022) - Achieving 1 GPa fatigue strength in nanocrystalline 316L steel through recovery annealing
Scr. Mater., 217, ARTN 114773 (2022) - On the transition of failure control from material-intrinsic defects to defects forming during monotonically increasing and cyclic mechanical loading in WC-Co hard metal at elevated temperature
Acta Mater., 235, ARTN 118087 (2022) - Hybrid metal-ceramic biomaterials fabricated through powder bed fusion and powder metallurgy for improved impact resistance of craniofacial implants
MATERIALIA, 24, ARTN 101465 (2022) - Influence of Hatch Strategy on Crystallographic Texture Evolution, Mechanical Anisotropy of Laser Beam Powder Bed Fused S316L Steel
Adv. Eng. Mater., 1234, ARTN 2200524 (2022) - TMS LDI: ACCELERATING DIVERSE LEADERSHIP ACROSS EVERY LEVEL OF THE SOCIETY
JOM (2022) - Antibacterial activity, cytocompatibility, and thermomechanical stability of Ti40Zr10Cu36Pd14 bulk metallic glass
MATERIALS TODAY BIO, 16, ARTN 100378 (2022) - Microstructure, Mechanical Properties, and Corrosion Behavior of 06Cr15Ni4CuMo Processed by Using Selective Laser Melting
METALS, 12, ARTN 1303 (2022) - Atomic-scale understanding of the structural evolution of TiN/AlN superlattice during nanoindentation - Part 1: Deformation
Acta Mater., 234, ARTN 118008 (2022) - Atomic-scale understanding of the structural evolution in TiN/AlN superlattice during nanoindentation-Part 2: Strengthening
Acta Mater., 234, ARTN 118009 (2022) - Selective Laser Melting of TiC-Based Cermet: HIP Studies
Trans. Indian Inst. Met., 98-105 (2022) - Wire Arc Additive Manufacturing of NiTi 4D Structures: Influence of Interlayer Delay
3D Print. Addit. Manuf., 123, 1-8 (2022) - Effect of TiB2 addition on the mechanical and biological response of spark plasma sintered Ti6Al7Nb matrix composites
J. Alloy. Compd., 924, ARTN 166502 (2022) - A novel crack-free Ti-modified Mo alloy designed for laser powder bed fusion
J. Alloy. Compd., 910, ARTN 164802 (2022) - Tribological investigations of Mo films deposited on thin polyimide substrates
Surf. Coat. Technol., 442, ARTN 128549 (2022) - Effect of preheating and cooling of the powder bed by laser pulse shaping on the microstructure of the TiC based cermets
Ceram. Int., 48, 20612-20618 (2022) - Fabrication of stainless-steel microfibers with amorphous-nanosized microstructure with enhanced mechanical properties
Sci Rep, 12, ARTN 10784 (2022) - Mitigating the detrimental effects of galvanic corrosion by nanoscale composite architecture design
NPJ MATERIALS DEGRADATION, 6, ARTN 47 (2022) - Mapping Shear Bands in Metallic Glasses: From Atomic Structure to Bulk Dynamics
Phys. Rev. Lett., 128, ARTN 245501 (2022) - Film thickness and architecture effects in biaxially strained polymer supported Al/Mo bilayers
MATERIALS TODAY COMMUNICATIONS, 31, ARTN 103455 (2022) - Synthesis and structure of refractory high entropy alloy thin films based on the MoNbTaW system
Surf. Coat. Technol., 439, ARTN 128446 (2022) - Thermoplasticity of metallic glasses: Processing and applications
Prog. Mater. Sci., 127, ARTN 100941 (2022) - Technical Note: Hardness, Corrosion Behavior, and Microstructural Characteristics of a Selective Laser Melted 17-4 PH Steel
Corrosion, 78, 465-472 (2022) - Additive Manufacturing of CoCrFeMnNi High-Entropy Alloy/AISI 316L Stainless Steel Bimetallic Structures
Adv. Eng. Mater., 1234, ARTN 2200341 (2022) - Configurational force based analysis of creep crack growth
Int. J. Fract., 2022, 1-25 (2022) - High-Throughput Micromechanical Testing Enabled by Optimized Direct Laser Writing
Adv. Eng. Mater., 2022, ARTN 2200288 (2022) - Redeposition layer formation caused by shading effect during sputter cleaning and associated damage on rake face of TiN coated high-speed steel drills
Surf. Coat. Technol., 438, ARTN 128412 (2022) - Mechanical Properties, Microstructure, and Actuation Behavior of Wire Arc Additive Manufactured Nitinol: Titanium Bimetallic Structures
3D Print. Addit. Manuf., 9, 98-105 (2022) - Effect of Powder Characteristic and Aging Treatment on the Corrosion Behavior of Selective Laser Melted Al-20Si Alloy
Trans. Indian Inst. Met. (2022) - Interaction of crack and hole: effects on crack trajectory, crack driving force and fracture toughness
Int. J. Fract., 88, 1-26 (2022) - Ti6Al7Nb-TiB nanocomposites for ortho-implant applications
J. Mater. Res., 1234, 98-105 (2022) - A novel approach for determining the stress intensity factor for cracks in multilayered cantilevers
Eng. Fract. Mech., 266, ARTN 108386 (2022) - Atomistic mechanisms underlying plasticity and crack growth in ceramics: a case study of AlN/TiN superlattices
Acta Mater., 229, ARTN 117809 (2022) - Deformation-induced medium-range order changes in bulk metallic glasses
Phys. Rev. Mater., 6, ARTN 043603 (2022) - Subtle change in the work hardening behavior of fcc materials processed by selective laser melting
PROGRESS IN ADDITIVE MANUFACTURING, 7, 453-461 (2022) - Effect of the Laser Processing Parameters on the Selective Laser Melting of TiC-Fe-Based Cermets
JOURNAL OF MANUFACTURING AND MATERIALS PROCESSING, 6, ARTN 35 (2022) - Linking through-thickness cracks in metallic thin films to in-situ electrical resistance peak broadening
Scr. Mater., 212, ARTN 114550 (2022) - Maximizing the degree of rejuvenation in metallic glasses
Scr. Mater., 212, ARTN 114575 (2022) - Influence of grain aspect-ratio on the fracture properties of ultrafine-grained tantalum
Mater. Des., 216, ARTN 110545 (2022) - Thermal stress analysis and structural optimization of ladle nozzle based on finite element simulation
MATERIALS RESEARCH EXPRESS, 9, ARTN 045601 (2022) - Characterization methods for strain-induced damage in polypropylene
Polym. Eng. Sci., 25, ARTN25979 (2022) - Quantitative Strain and Topography Mapping of 2D Materials Using Nanobeam Electron Diffraction
Microsc. microanal., 2022, 1-15 (2022) - Editorial: Fundamentals and Challenges of Advanced Amorphous and High-Entropy Alloys</p>
Front. Mater., 9, ARTN 874556 (2022) - Role of laser remelting and heat treatment in mechanical and tribological properties of selective laser melted Ti6Al4V alloy
J. Alloy. Compd., 897, ARTN 163207 (2022) - On the existence of orthorhombic martensite in a near-alpha titanium base alloy used for additive manufacturing
J. Alloy. Compd., 897, ARTN 163155 (2022) - Manufacturing of Textured Bulk Fe-SmCo5 Magnets by Severe Plastic Deformation
NANOMATERIALS, 12, ARTN 963 (2022) - The effect of solute atoms on the bulk and grain boundary cohesion in Ni: Implications for hydrogen embrittlement
MATERIALIA, 21, ARTN 101293 (2022) - Fracture of severely plastically deformed titanium
Mater. Lett., 309, ARTN 131382 (2022) - Mechanical and Tribological Behavior of Gravity and Squeeze Cast Novel Al-Si Alloy
METALS, 12, ARTN 194 (2022) - Cracking mechanism in a laser powder bed fused cold-work tool steel: The role of residual stresses, microstructure and local elemental concentrations
Acta Mater., 225, ARTN 117570 (2022) - High virucidal potential of novel ceramic-metal composites fabricated via hybrid selective laser melting and spark plasma sintering routes
Int. J. Adv. Manuf. Technol., 2022, ARTN 8878 (2022) - Effect of supporting electrolyte on capacitance and morphology of electrodeposited poly(3,4-propylenedioxythiophene) derivatives bearing reactive functional groups
Mol. Syst. Des. Eng., 460, 460-479 (2022) - Influence of interlayers on the interfacial behavior of Ag films on polymer substrates
Thin Solid Films, 742, ARTN 139051 (2022) - Selective Laser Melting of Commercially Pure Molybdenum by Laser Rescanning
3D Print. Addit. Manuf., 123, 1-7 (2022) - Cementite decomposition in 100Cr6 bearing steel during high-pressure torsion: Influence of precipitate composition, size, morphology and matrix hardness
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 833, ARTN 142372 (2022) - Laser additive manufacturing of nano-TiC particles reinforced CoCrFeMnNi high-entropy alloy matrix composites with high strength and ductility
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 833, ARTN 142512 (2022) - Precipitation behavior of a Co-free Fe-Ni-Cr-Mo-Ti-Al maraging steel after severe plastic deformation
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 833, ARTN 142416 (2022) - Microstructure-dependent phase stability and precipitation kinetics in equiatomic CrMnFeCoNi high-entropy alloy: Role of grain boundaries
Acta Mater., 223, ARTN 117470 (2022) - Fabrication of Al/Mg Bimetallic Thin-Walled Ultrafine-Grained Tube by Severe Plastic Deformation
J. Mater. Eng. Perform., 021, ARTN 06514-5 (2022) - Evolution of Microstructure and Mechanical Properties of LM25-HEA Composite Processed through Stir Casting with a Bottom Pouring System
MATERIALS, 15, ARTN 230 (2022) - Electron Back Scatter Diffraction and Synchrotron X-Ray Peak Profile Analysis as Tools for Microstructural Characterization of Large Strain Work Hardened Metals
Int. J. Mater. Res., 92, 410-416 (2022) - Annealing metallic glasses above T-g in order to accelerate the relaxation process in molecular dynamics simulations
Appl. Phys. Lett., 120, ARTN 011904 (2022) - Selective Laser Melting of TiC-Fe via Laser Pulse Shaping: Microstructure and Mechanical Properties
3D Print. Addit. Manuf., 4, 57-63 (2021) - Iron-rich talc as air-stable platform for magnetic two-dimensional materials
NPJ 2D MATERIALS AND APPLICATIONS, 5, ARTN 94 (2021) - Mechanism of cementite decomposition in 100Cr6 bearing steels during high pressure torsion
Acta Mater., 201, 79-93 (2021) - Grain boundary segregation in Ni-base alloys: A combined atom probe tomography and first principles study
Acta Mater., 221, ARTN 117354 (2021) - Effect of cold rolling on the pressure coefficient of glass transition temperature in bulk metallic glasses
Thermochim. Acta, 706, ARTN 179071 (2021) - Investigating the Structure, Microstructure, and Texture in Selective Laser-Melted Sterling Silver 925
Metall. Mater. Trans. A-Phys. Metall. Mater. Sci., 52, 5329-5341 (2021) - Rapid solidification and metastable phase formation during surface modifications of composite Al-Cr cathodes exposed to cathodic arc plasma
J. Mater. Sci. Technol., 94, 147-163 (2021) - Strain-hardening properties of the high-entropy alloy MoNbTaTiVZr processed by high-pressure torsion
Continuum Mech. Thermodyn., 21, ARTN 01065-5 (2021) - Porosity and thickness effect of Pd-Cu-Si metallic glasses on electrocatalytic hydrogen production and storage
Mater. Des., 210, ARTN 110099 (2021) - Microstructure and mechanical properties of NiTi-SS bimetallic structures built using Wire Arc Additive Manufacturing
Mater. Lett., 303, ARTN 130499 (2021) - In Vitro Corrosion Behavior of Selective Laser Melted Ti-35Nb-7Zr-5Ta
J. Mater. Eng. Perform., 30, 7967-7978 (2021) - Synergistic Effect of Ni and Co Alloying on Corrosion Behavior of Fe(Ni,Co)P13C7 Metallic Glasses in 1M NaCl Solution
Int. J. Electrochem. Sci., 16, ARTN 211256 (2021) - Direct observation of nanocrystal-induced enhancement of tensile ductility in a metallic glass composite
Mater. Des., 209, ARTN 109970 (2021) - Dissimilar welding of high-entropy alloy to Inconel 718 superalloy for structural applications
J. Mater. Res., 2021, ARTN 352 (2021) - Influence of high pressure torsion on microstructure evolution and mechanical properties of AZ80/SiC magnesium matrix composites
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 826, ARTN 141916 (2021) - SHAPING A COMMUNITY: THE IMPACT OF THE MATERIALS PROCESSING & MANUFACTURING DIVISION
JOM, 2021, ARTN 04931-4 (2021) - Ti6Al7Nb-based TiB-reinforced composites by selective laser melting
J. Mater. Res., 36, 3691-3700 (2021) - Investigation on microstructure and texture evolution of Ti-6Al-3Nb-2Zr-1Mo alloy during hot deformation
MATERIALS RESEARCH EXPRESS, 8, ARTN 096520 (2021) - Improved fracture resistance of Cu/Mo bilayers with thickness tailoring
Scr. Mater., 202, ARTN 113994 (2021) - Nanocrystalline FeCr alloys synthesised by severe plastic deformation-A potential material for exchange bias and enhanced magnetostriction
J. Magn. Magn. Mater., 534, ARTN 168017 (2021) - Assessment of grain boundary cohesion of technically pure and boron micro-doped molybdenum via meso-scale three-point-bending experiments
Mater. Des., 207, ARTN 109848 (2021) - Enhancement of Interfacial Hydrogen Interactions with Nanoporous Gold-Containing Metallic Glass
ACS Appl. Mater. Interfaces, 13, 42613-42623 (2021) - Cryo-Casting for Controlled Decomposition of Cu-Zr-Al Bulk Metallic Glass into Nanomaterials: Implications for Design Optimization
ACS APPLIED NANO MATERIALS, 4, 7771-7780 (2021) - First-principles calculations to investigate pressure effect on mechanical and thermal properties of ZrAl2
Comput. Theor. Chem., 1202, ARTN 113304 (2021) - Mechanochemical Synthesis of Rosin-Modified Montmorillonite: A Breakthrough Approach to the Next Generation of OMMT/Rubber Nanocomposites
NANOMATERIALS, 11, ARTN 1974 (2021) - Influence of substructures on the selective laser melted Ti-6Al-4V alloy as a function of laser re-melting
J. Manuf. Process., 68, 1387-1394 (2021) - Effect of Interlayer Delay on the Microstructure and Mechanical Properties of Wire Arc Additive Manufactured Wall Structures
MATERIALS, 14, ARTN 4187 (2021) - Biomorphic porous Ti6Al4V gyroid scaffolds for bone implant applications fabricated by selective laser melting
PROGRESS IN ADDITIVE MANUFACTURING, 6, 455-469 (2021) - Effective Methanol Oxidation with Platinum Nanoparticles-Decorated Poly(2-bromomethyl-2-methyl-3,4-propylenedioxythiophene)-Coated Glassy Carbon Electrode
J. Electrochem. Soc., 168, ARTN 086503 (2021) - Atomic diffusivities in amorphous and liquid Cu-Zr: Kirkendall effects and dependence on packing density
Acta Mater., 214, ARTN 116993 (2021) - Copper and its effects on microstructure and correlated tensile properties of super duplex stainless steels
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 821, ARTN 141544 (2021) - Mechanisms controlling fracture toughness of additively manufactured stainless steel 316L
Int. J. Fract., 2021, ARTN 574-3 (2021) - Hardness and failure assessment of a hot extrusion punch during service
Eng. Fail. Anal., 125, ARTN 105382 (2021) - Selective Laser Melting of Al-7Si-0.5 Mg-0.5Cu: Effect of Heat Treatment on Microstructure Evolution, Mechanical Properties and Wear Resistance
Acta Metall. Sin.-Engl. Lett., 21, ARTN 01279 (2021) - Texture dependent strain hardening in additively manufactured stainless steel 316L
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 820, ARTN 141483 (2021) - Influence of Gradient Residual Stress and Tip Shape on Stress Fields Inside Indented TiN Hard Coating
Adv. Eng. Mater., 2021, ARTN 2100130 (2021) - Mechanical spectroscopy of metal/polymer composite membranes for hydrogen separation
J. Alloy. Compd., 866, ARTN 159014 (2021) - Powder Diffraction Data of Aluminum-Rich FCC-Ti1-xAlxN Prepared by CVD
COATINGS, 11, ARTN 683 (2021) - Spark plasma sintering of Ti6Al4V metal matrix composites: Microstructure, mechanical and corrosion properties
J. Alloy. Compd., 865, ARTN 158875 (2021) - On the behavior of rhenium under high-pressure torsion at room temperature
Mater. Lett., 292, ARTN 129634 (2021) - Origin of Electrocatalytic Activity in Amorphous Nickel-Metalloid Electrodeposits
ACS Appl. Mater. Interfaces, 13, 23689-23701 (2021) - Properties of HPT-Processed Large Bulks of p-Type Skutterudite DD0.7Fe3CoSb12 with ZT > 1.3
ACS Appl. Energ. Mater., 4, 4831-4844 (2021) - Electrospun polyacrylonitrile/2-(acryloyloxy)ethyl ferrocenecarboxylate polymer blend nanofibers
Mol. Syst. Des. Eng., 1, 1 (2021) - Spark plasma sintering of molybdenum silicides synthesized from oxide precursors
Ceram. Int., 47, 13827-13836 (2021) - Atomistic understanding of creep and relaxation mechanisms of Cu64Zr36 metallic glass at different temperatures and stress levels
J. Non-Cryst. Solids, 559, ARTN 120676 (2021) - Additive Manufacturing of Aluminum-Based Metal Matrix Composites-A Review
Adv. Eng. Mater., 2021, ARTN 2100053 (2021) - Microstructural evolution and mechanical properties of selective laser melted Ti-6Al-4V induced by annealing treatment
J. Cent. South Univ., 28, 1068-1077 (2021) - Origin of strain hardening in monolithic metallic glasses
Phys. Rev. B, 103, ARTN L140107 (2021) - Self-Reducing Silver Ink on Polyurethane Elastomers for the Manufacture of Thin and Highly Stretchable Electrical Circuits
Chem. Mat., 33, 2742-2755 (2021) - Influence of high-pressure torsion deformation on the corrosion behaviour of a bioresorbable Mg-based alloy studied by positron annihilation
Biomater. Sci., 2021, ARTN: 00166c (2021) - A universal criterion for the failure threshold in slowly sheared bulk metallic glasses
J. Appl. Phys., 129, ARTN 155109 (2021) - Annealing of Al-Zn-Mg-Cu Alloy at High Pressures: Evolution of Microstructure and the Corrosion Behavior
MATERIALS, 14, ARTN 2076 (2021) - The formation of TiO2/VO2 multilayer structure via directional cationic diffusion
Nanoscale, 13, 7783-7791 (2021) - Griffith's Legacy to Alloy Design and Beyond
JOM, 2021, ARTN 4667-1 (2021) - Influence of Microalloying Elements and Deformation Parameters on the Recrystallization and Precipitation Behavior of Two Low-Alloyed Steels
Steel Res. Int., 2021, ARTN 2100065 (2021) - Effect of Pressure and Temperature on Microstructure of Self-Assembled Gradient AlxTi1-xN Coatings
COATINGS, 11, ARTN 416 (2021) - Tailoring Extra-Strength of a TWIP Steel by Combination of Multi-Pass Equal-Channel Angular Pressing and Warm Rolling
METALS, 11, ARTN 518 (2021) - Synthesis of bulk reactive Ni-Al composites using high pressure torsion
J. Alloy. Compd., 857, ARTN 157503 (2021) - Phase Formation, Microstructure and Mechanical Properties of Mg67Ag33 as Potential Biomaterial
METALS, 11, ARTN 461 (2021) - Functionalized highly electron-rich redox-active electropolymerized 3,4-propylenedioxythiophenes as precursors and targets for bioelectronics and supercapacitors
Mol. Syst. Des. Eng., 6, 214-233 (2021) - Improved electro-mechanical reliability of flexible systems with alloyed Mo-Ta adhesion layers
Thin Solid Films, 720, ARTN 138533 (2021) - Correlation between internal states and creep resistance in metallic glass thin films
J. Appl. Phys., 129, ARTN 085302 (2021) - Influence of cold rolling on the fatigue crack growth behavior of tungsten
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 805, ARTN 140791 (2021) - X-ray Diffraction Computed Nanotomography Applied to Solve the Structure of Hierarchically Phase-Separated Metallic Glass
ACS Nano, 15, 2386-2398 (2021) - Selective laser melting of Ti6Al4V: Effect of laser re-melting
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 805, ARTN 140558 (2021) - Geometrical model for calculating the effect of surface morphology on total x-ray output of medical x-ray tubes
Med. Phys., 2021, ARTN 14649 (2021) - Adhesion evaluation of thin films to dielectrics in multilayer stacks: A comparison of four-point bending and stressed overlayer technique
Mater. Des., 200, ARTN 109451 (2021) - Effect of alloying elements on hydrogen enhanced decohesion in bcc iron
Comput. Mater. Sci., 188, ARTN 110215 (2021) - Optimization of Mechanical Properties and Damage Tolerance in Polymer-Mineral Multilayer Composites
MATERIALS, 14, ARTN 725 (2021) - The Impact Resistance of Highly Densified Metal Alloys Manufactured from Gas-Atomized Pre-Alloyed Powders
COATINGS, 11, ARTN 216 (2021) - The S-content-dependent lattice structure evolution and bandgap modulation in quaternary MgZnOS alloy films
J. Phys. D-Appl. Phys., 54, ARTN 065104 (2021) - Direct determination of the area function for nanoindentation experiments
J. Mater. Res., 37, ARTN: 43578 (2021) - High entropy alloy nanocomposites produced by high pressure torsion
Acta Mater., 208, ARTN 116714 (2021) - Stress intensity factor for w-shape tension specimens
Eng. Fract. Mech., 242, ARTN 107478 (2021) - Microstructural Effects on the Interfacial Adhesion of Nanometer-Thick Cu Films on Glass Substrates: Implications for Microelectronic Devices
ACS APPLIED NANO MATERIALS, 4, 61-70 (2021) - Composite of medium entropy alloys synthesized using spark plasma sintering
Scr. Mater., 191, 46-51 (2021) - Stress-strain behavior and microstructural evolution of ultra-high carbon Fe-C-Cr-V-Mo steel subjected to hot deformation
Mater. Charact., 171, ARTN 110746 (2021) - Core-shell structured NiCo2O4@Ni(OH)(2) nanomaterials with high specific capacitance for hybrid capacitors
Ionics, ARTN 03817 (2021) - Influence of the nitrogen content on the structure and properties of MoNbTaVW high entropy alloy thin films
J. Alloy. Compd., 850, ARTN 156740 (2021) - Controlling the high temperature deformation behavior and thermal stability of ultra-fine-grained W by re alloying
J. Mater. Res., 1, ARTN: 43578 (2021) - Microstructure, strength and fracture toughness of CuNb nanocomposites processed with high pressure torsion using multi-sector disks
Scr. Mater., 189, 48-52 (2020) - Influence of combinatorial annealing and plastic deformation treatments on the intrinsic properties of Cu46Zr46Al8 bulk metallic glass
Intermetallics, 127, ARTN 106986 (2020) - Two-dimensional SnO ultrathin epitaxial films: Pulsed laser deposition growth and quantum confinement effects
Physica B, 599, ARTN 412467 (2020) - Selective laser melting of high-strength, low-modulus Ti-35Nb-7Zr-5Ta alloy
MATERIALIA, 14, ARTN 100941 (2020) - Phase change memory based on Ta-Sb-Te alloy -Towards a universal memory
MATERIALS TODAY PHYSICS, 15, ARTN 100266 (2020) - Effective electrocatalytic methanol oxidation of Pd-based metallic glass nanofilms
Nanoscale, 12, 22586-22595 (2020) - In situ high-energy X-ray diffraction study of thermally -activated martensitic transformation far below room temperature in CuZr-based bulk metallic glass composites
J. Alloy. Compd., 841, ARTN 155781 (2020) - A new approach to evaluate the elastic modulus of metallic foils
Mater. Des., 196, ARTN 109149 (2020) - The role of crystallographic texture on mechanically induced grain boundary migration
Acta Mater., 200, 404-416 (2020) - Strain Induced Anisotropic Magnetic Behaviour and Exchange Coupling Effect in Fe-SmCo5 Permanent Magnets Generated by High Pressure Torsion
Crystals, 10, ARTN 1026 (2020) - Surface oxidation of nanocrystalline CVD TiB2 hard coatings revealed by cross-sectional nano-analytics and in-situ micro-cantilever testing
Surf. Coat. Technol., 399, ARTN 126181 (2020) - Nanoindentation and microbending analyses of glassy and crystalline Zr (-Hf)-Cu thin-film alloys
Surf. Coat. Technol., 399, ARTN 126139 (2020) - Nanoscale stress distributions and microstructural changes at scratch track cross-sections of a deformed brittle-ductile CrN-Cr bilayer
Mater. Des., 195, ARTN 109023 (2020) - Selective Laser Melting of Aluminum and Its Alloys
MATERIALS, 13, ARTN 4564 (2020) - Nd3+ ions induced rational morphology control of transition metal oxides for high energy storage performance
J. Power Sources, 472, ARTN 228599 (2020) - Effect of Carbon in Severe Plastically Deformed Metals
Adv. Eng. Mater., 22, ARTN 2000879 (2020) - Severe Plastic Deformation and Thermomechanical Processing: Nanostructuring and Properties
METALS, 10, ARTN 1306 (2020) - Intrinsic and extrinsic effects on the brittle-to-ductile transition in metallic glasses
J. Appl. Phys., 128, ARTN 125102 (2020) - Effect of TiB(2)particle size on the material transfer behaviour of Cu-TiB(2)composites
Mater. Sci. Technol., 36:15, 1685-1694 (2020) - Multi-scale interface design of strong and damage resistant hierarchical nanostructured materials
Mater. Des., 196, ARTN 109169 (2020) - Atomic-scale study on incoherent twin boundary evolution in nanograined Cu
Scr. Mater., 186, 278-281 (2020) - In-operando fatigue behavior of gold metallization lines on polyimide substrate
Scr. Mater., 186, 48-51 (2020) - Thermal stabilization of metal matrix nanocomposites by nanocarbon reinforcements
Scr. Mater., 186, 202-207 (2020) - Fracture properties of thin film TiN at elevated temperatures
Mater. Des., 194, ARTN 108885 (2020) - Verification of the generalised chemical potential for stress-driven hydrogen diffusion in nickel
Philos. Mag. Lett., 2020, ARTN 1808253 (2020) - EBSD characterization of pure and K -doped tungsten fibers annealed at different temperatures
J. Nucl. Mater., 537, UNSP 152201 (2020) - Atomic -scale investigation on the structural evolution and deformation behaviors of Cu-Cr nanocrystalline alloys processed by high-pressure torsion
J. Alloy. Compd., 832, ARTN 154994 (2020) - Influence of TiO 2 charge and BSA -metal ion complexation on retention of Cr (VI) in ultrafiltration process
J. Alloy. Compd., 832, ARTN 153986 (2020) - Balancing the electro-mechanical and interfacial performance of Mo-based alloy films
MATERIALIA, 12, ARTN 100774 (2020) - Thermomechanical and structural characterization of polybutadiene/poly(ethylene oxide)/CNT stretchable electrospun fibrousmembranes
Polym. Adv. Technol., 2020, 248-261 (2020) - Balancing the strength and ductility of graphene oxide-carbon nanotube hybrid reinforced aluminum matrix composites with bimodal grain distribution
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 796, ARTN 140067 (2020) - Novel intermetallic-reinforced near-alpha Ti alloys manufactured by spark plasma sintering
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 792, ARTN 139798 (2020) - Achieving work hardening by forming boundaries on the nanoscale in a Ti-based metallic glass matrix composite
J. Mater. Sci. Technol., 50, 192-203 (2020) - Mapping the mechanical properties in nitride coatings at the nanometer scale
Acta Mater., 194, 343-353 (2020) - Metallic Glass Films with Nanostructured Periodic Density Fluctuations Supported on Si/SiO(2)as an Efficient Hydrogen Sorber
Chem.-Eur. J., 26, 8244-8253 (2020) - Fatigue crack threshold analysis of TiAl SENT and CC specimens - Influence of starter notch and precracking
Intermetallics, 121, ARTN 106770 (2020) - Extraordinary high-temperature behavior of electrically conductive Hf7B23Si22C6N40 ceramic film
Surf. Coat. Technol., 391, ARTN 125686 (2020) - Effect of tempering and deep cryogenic treatment on microstructure and mechanical properties of Cr-Mo-V-Ni steel
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 787, ARTN 139520 (2020) - The Relationships of Microscopic Evolution to Resistivity Variation of a FIB-Deposited Platinum Interconnector
MICROMACHINES, 11, ARTN 588 (2020) - Mechanical and optical degradation of flexible optical solar reflectors during simulated low earth orbit thermal cycling
Acta Astronaut., 175, 277-289 (2020) - Microstructural evolution of W-10Re alloys due to thermal cycling at high temperatures and its impact on surface degradation
Int. J. Refract. Met. Hard Mat., 92, ARTN 105285 (2020) - Microscopic Mechanism of Carbon-Dopant Manipulating Device Performance in CGeSbTe-Based Phase Change Random Access Memory
ACS Appl. Mater. Interfaces, 12, 23051-23059 (2020) - Hydrogen Trapping in bcc Iron
MATERIALS, 13, ARTN 2288 (2020) - Temperature dependence of surface and grain boundary energies from first principles
Phys. Rev. B, 101, ARTN 174103 (2020) - High pressure torsion induced lowering of Young's modulus in high strength TNZT alloy for bio-implant applications
J. Mech. Behav. Biomed. Mater., 108, UNSP 103839 (2020) - Synthesis of nanodiamond reinforced silver matrix nanocomposites: Microstructure and mechanical properties
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 782, ARTN 139254 (2020) - Premature failure of an additively manufactured material
NPG Asia Mater., 12, ARTN 30 (2020) - Microstructure, Texture, and Strength Development during High-Pressure Torsion of CrMnFeCoNi High-Entropy Alloy
Crystals, 10, ARTN 336 (2020) - The effect of grain size on the fatigue overload behaviour of nickel
Mater. Des., 189, ARTN 108526 (2020) - Influence of WC-Co hard metal microstructure on defect density, initiation and propagation kinetics of fatigue cracks starting at intrinsic and artificial defects under a negative stress ratio
Acta Mater., 188, 30-39 (2020) - An SEM compatible plasma cell for in situ studies of hydrogen-material interaction
Rev. Sci. Instrum., 91, ARTN 043705 (2020) - Open-cell tungsten nanofoams: Chloride ion induced structure modification and mechanical behavior
Results Phys., 17, ARTN 103062 (2020) - Oligoether Ester-Functionalized ProDOT Copolymers on Si/Monolayer Graphene as Capacitive Thin Film Electrodes
J. Electrochem. Soc., 167, ARTN 070543 (2020) - A Modified Electrochemical Nanoindentation Setup for Probing Hydrogen-Material Interaction Demonstrated on a Nickel-Based Alloy
JOM, 72, 2020-2029 (2020) - Fatigue crack growth model including load sequence effects - Model development and calibration for railway axle steels
Int. J. Fatigue, 132, ARTN 105377 (2020) - Nanoscale evolution of stress concentrations and crack morphology in multilayered CrN coating during indentation: Experiment and simulation
Mater. Des., 188, ARTN 108478 (2020) - Metal flow behavior of P/M connecting rod preform in flashless forging based on isothermal compression and numerical simulation
J. Mater. Res. Technol-JMRT, 9, 1200-1209 (2020) - Strain perceptibility of elements on the diffusion in Zr-based amorphous alloys
Sci Rep, 10, ARTN 4575 (2020) - Study on Ca Segregation toward an Epitaxial Interface between Bismuth Ferrite and Strontium Titanate
ACS Appl. Mater. Interfaces, 12, 12264-12274 (2020) - Fatigue crack growth in full-scale railway axles - Influence of secondary stresses and load sequence effects
Int. J. Fatigue, 132, ARTN 105360 (2020) - Probing defect relaxation in ultra-fine grained Ta using micromechanical spectroscopy
Acta Materialia, 185, 309-319 (2020) - Non-destructive Testing of Thin Birch (Betula pendula Roth.) Veneers
BioResources, 15, 1265-1281 (2020) - Stability, elasticity and electronic structures of Co-Zr binary intermetallic compounds
Philos. Mag., 2020, ISSN 1478-6435 (2020) - The effect of anisotropic microstructure on the crack growth and fatigue overload behaviour of ultrafine-grained nickel
Acta Mater., 184, 225-240 (2020) - Sputter deposition of NiW films from a rotatable target
Appl. Surf. Sci., 511, ARTN 145616 (2020) - Ageing Behaviour of Al-Mg-Si Alloys After Cryogenic and Room Temperature Deformation
materials, 13, ARTN 13030554 (2020) - Angular resolved mass-energy analysis of species emitted from a dc magnetron sputtered NiW-target
J. Vac. Sci. Technol. A, 38, ARTN 023401 (2020) - Microstructural evolution during heating of CNT/Metal Matrix Composites processed by Severe Plastic Deformation
Sci Rep, 10:857, ARTN 57946-3 (2020) - Magnetic dilution by severe plastic deformation
AIP Advances, 10, ARTN 015210 (2020) - 4-aminophenyl sulfone (APS) as novel monomer in fabricating paper based TFC composite for forward osmosis: Selective layer optimization
Journal of Environmental Chemical Engineering, 8, ARTN 103664 (2020) - Microstructures, Mechanical Properties, and Corrosion Behaviors of Refractory High-Entropy ReTaWNbMo Alloys
J. Mater. Eng. Perform., 29, 399-409 (2020) - Tailoring ultra-strong nanocrystalline tungsten nanofoams by reverse phase dissolution
Acta MaterialiaElsevier, 182, 215-225 (2020) - Inconel-steel multilayers by liquid dispersed metal powder bed fusion: Microstructure, Residual stress and Property Gradients
Additive Manufacturing, 32, ARTN 101027 (2019) - Novel a + b Type Ti-Fe-Cu Alloys Containing Sn with Pertinent Mechanical Properties
metals, 10, 1-12 (2019) - Electrocatalytic Behavior of Hydrogenated Pd-Metallic Glass Nanofilms: Butler-Volmer, Tafel, and Impedance Analyses
Electrocatalysis, 11, 94-109 (2019) - Reversing and non-reversing effects of PEEK-HA composites on tuning cooling rate during crystallization
J. Polym. Res., 26, ARTN 279 (2019) - Fatique crack growth in railway axle specimens - Transferability and model validation
International Journal of Fatigue, 133, ARTN 105421 (2019) - Combined Fe and O effects on microstructural evolution and strengthening in Cu-Fe nanocrystalline alloys
Materials Science & Engineering, 772, ARTN 138800 (2019) - In situ fabrication of TiC-NiCr cermets by selective laser melting
International Journal of Refractory Metals & Hard Materials, 87, ARTN 105171 (2019) - Understanding structural evolution of nanostructures during deformation form 2D (3D) Experiments
IOP Conference SeriesMaterials Science and Engineering, 580, ARTN 012021 (2019) - Ultrafine-grained Tungsten by High-Pressure Torsion-Bulk precursor versus powder processing route
IOP Conference Series: Materials Science and Engineering, 580, ARTN 012051 (2019) - Application of the material inhomogeneity effect for the improvement of fracture toughness of a brittle polymer
Engineering Fracture Mechanics, 224, ARTN 106776 (2019) - Stress-controlled decomposition routes in cubic AlCrN films assessed by in-situ high-temperature high-energy grazing incidence transmission X-ray diffraction
Scientific ReportsNature, 9, ARTN 18027 (2019) - Microstructure and stress gradients in TiW thin films characterized by 40 nm X-ray diffraction and transmission electron microscopy
Thin Solid Films, 691, ARTN 137576 (2019) - Novel welding of Al0.5CoCrFeNi high-entropy alloy: Corrosion behavior
Journal of Alloys and Compounds, 817, ARTN 153163 (2019) - Growth-twins in CrN/AlN multilayers induced by hetero-phase interfaces
Acta Materialia, 185, 157-170 (2019) - The sputter performance of an industrial-scale planar Mo-target over its lifetime: Target erosion and film properties
Surface & Coatings Technology, 381, ARTN 125174 (2019) - Biegsames Glas statt Scherben
Kronen Zeitung, 19 (2019) - Investigation of high cyclic fatigue behaviour of thin copper films using MEMS structure
Int. J. Fatigue, 128, ARTN 105179 (2019) - Effect of Re on microstructural evolution and densification kinetics during spark plasma sintering of nanocrystalline W
Adv. Powder Technol., 30, 2779-2786 (2019) - Combined thermo-physical investigations of thin layers with Time Domain Thermoreflectance and Scanning Thermal Microscopy on the example of 500 nm thin, CVD grown tungsten
Thermochim. Acta, 681, ARTN 178373 (2019) - Highly ductile amorphous oxide at room temperature and high strain rate
Science, 366, 864-869 (2019) - Bioinspired toughness improvement through soft interlayers in mineral reinforced polypropylene
Mechanics of Materials, 1 40, ARTN 103243 (2019) - Tuneable Magneto-Resistance by Severe Plastic Deformation
metals, 2019, ARTN 1188 (2019) - Aluminum matrix composites reinforced with metallic glass particles with core-shell structure
Materials Science & Engineering, A 771, ARTN 138630 (2019) - On the Room-Temperature Mechanical Properties of an Ion-Irradiated TiZrNbHfTa Refractory High Entropy Alloy
JOM, 2019, ARTN 3861-6 (2019) - Development of Damage - Tolerant and Fracture-Resistant Materials by Utilizing the Material Inhomogeneity Effect
ASMEJournal of Applied Mechanics, 86, 111004-1-111004-12 (2019) - Evolution of Bimodal Microstructure and High-Temperature Wear Resistance of Al-Cu-Ni Alloys
Communication, A, ARTN 5518 (2019) - Effect of Heterophase Interfaces on Microstructure and Crystallographic Texture Evolution During Rolling of Directionally Solidified Ag-Cu Eutectic Alloy
Metall. Mater. Trans. A-Phys. Metall. Mater. Sci., 51, 368-379 (2019) - Optimizing the magnetic properties of Fe-based amorphous powder by adjusting atomic structures from vitrification at different temperatures
Journal of Applied Physics, 126, ARTN 165109 (2019) - Damage tolerance of lamellar bone
Bone, 130, ARTN 115102 (2019) - Point-defect engineering of MoN/TaN superlattice films: A first-principles and experimental study
Mater. Des., 186, ARTN 108211 (2019) - High density of genuine growth twins in electrodeposited aluminium
Materials Science, 5, eaax3894 (2019) - Mechanical properties and epitaxial growth of TiN/AlN superlattices
Surf. Coat. Technol., 375, 1-7 (2019) - New Developments in Nanomechanical Methods
JOM, 71, 3340-3342 (2019) - CROSS-SECTIONAL GRADIENTS OF RESIDUAL STRESSES, MICROSTRUCTURE AND PHASES IN A NITRIDED STEEL REVEALED BY 20 mu m SYNCHROTRON X-RAY DIFFRACTION
Metall. Ital., 6-10 (2019) - Hierarchically-structured large superelastic deformation in ferroelastic-ferroelectrics
Acta Materialia, 181/2019, 501-509 (2019) - Au–Sn solders applied in transient liquid phase bonding: Microstructure and mechanical behavior
Materialia, 8, ARTN 100503 (2019) - Coiled artificial muscles based on UHMWPE with large muscle stroke
Materials Today Communications, 21 (2019), ARTN 100688 (2019) - Microstructural characterization of medium entropy alloy thin films
Scripta Materialia, 177, 22-26 (2019) - Correlation of mechanical damage and electrical behavior of Al/Mo bilayers subjected to bending
Thin Solid Films, 687, UNSP 137480 (2019) - Water in Mesoporous Confinement: Glass-To-Liquid Transition or Freezing of Molecular Reorientation Dynamics?
Molecules, 24/2019, ARTN 3563 (2019) - The Influence of Partial Replacement of Cu with Ga on the Corrosion Behavior of Ti40Zr10Cu36Pd14 Metallic Glasses
Journal of The Electrochemical Society, 166, 485-491 (2019) - Mechanochemical reaction of Al and melamine: a potential approach towards the in situ synthesis of aluminum nitride - carbon nanotube nanocomposites
PCCP, 21, 22121-22131 (2019) - The creep behavior of a fully lamellar γ-TiAl based alloy
Intermetallics, 114, ARTN 106611 (2019) - Microstructure and mechanical property of bimodal-size metallic glass particle-reinforced Al alloy matrix composites
Journal of Alloys and Compounds, 814, ARTN 152317 (2019) - Correlating elemental distribution with mechanical properties of TiN/SiNx nanocomposite coatings
Scr. Mater., 170, 20-23 (2019) - Elastic Properties and Stacking Fault Energies of Borides, Carbides and Nitrides from First-Principles Calculations
Acta Metall. Sin.-Engl. Lett., 32, 1099-1110 (2019) - Friction and Tribo-Chemical Behavior of SPD-Processed CNT-Reinforced Composites
LUBRICANTS, 7, ARTN 75 (2019) - Mechanical Behavior of Ti6Al4V Scaffolds Filled with CaSiO3 for Implant Applications
applied sciences, 2019, ARTN 3844 (2019) - Investigation of Compatibility Between M-Cr-Al-X Thermal Spray Coatings and Third Generation y-TiAl Alloys
Journal of Materials Engineering and Performance, 8, 1059-9495 (2019) - Effect of lattice surface treatment on performance of hardmetal - titanium interpenetrating phase composites
International Journal of Refractory Metals & Hard Materials, 86, ARTN 105087 (2019) - Tungsten Matrix Composite Reinforced with CoCrFeMnNi High-Entropy Alloy: Impact of Processing Routes on Microstructure and Mechanical Properties
metals, 9, 12 (2019) - Fracture behavior and deformation mechanisms in nanolaminated crystalline/amorphous micro-cantilevers
ElsevierActa Materialia, 180 (2019), 73-83 (2019) - Thermodynamic and mechanical stability of Ni3X-type intermetallic compounds
ElsevierIntermetallics, 9 (2019) - Toughening in nanosilica-reinforced epoxy with tunable filler-matrix interface properties
Compos. Sci. Technol., 183, ARTN 107799 (2019) - Atomic resolution analyses on defects in nanocrystalline Cu-based alloys generated by severe plastic deformation
Mater. Charact., 157, ARTN 109886 (2019) - Selective laser melting of 316L stainless steel: Influence of TIB2 addition on microstructure and mechanical properties
Materials Today CommunicationsElsevier, 21, 100615 (2019) - Quasicrystalline Composites by Additive Manufacturing
Key Engineering Materials, 818, 72-76 (2019) - Modulating heterogeneity and plasticity in bulk metallic glasses: Role of interfaces on shear banding
Int. J. Plast., 119, 156-170 (2019) - Investigation of structure and mechanical properties of TiZrHfNiCuCo high entropy alloy thin films synthesized by magnetron sputtering
J. Alloy. Compd., 797, 834-841 (2019) - 20 Hz synchrotron X-ray diffraction analysis in laser-pulsed WC-Co hard metal reveals oscillatory stresses and reversible composite plastification
Int. J. Refract. Met. Hard Mat., 82, 121-128 (2019) - Evolution of the lattice defects and crystalline domain size in carbon nanotube metal matrix composites processed by severe plastic deformation
Mater. Charact., 154, 344-352 (2019) - Microstructure and mechanical properties of Al-12Si and Al-3.5 Cu-1.5Mg-1Si bimetal fabricated by selective laser melting
Journal of Materials Science & Technology, 36, 18-26 (2019) - Facile preparation of superhydrophobic wood surfaces via spraying of aqueous alkyl ketene dimer dispersions
RSC ADVANCES, 9, 24357-24367 (2019) - Compositional tuning-induced permanent color adjustment and mechanical properties: Binary Cu-Mg colored metallic system
Mater. Des., 175, ARTN 107814 (2019) - Synthesis of new glassy Mg-Ca-Zn alloys with exeptionally low Young´s Modulus: Exploring near eutectic compositions
Scripta MaterialiaScience Direct, 173, 137-143 (2019) - Resolving the FCC/HCP interfaces of the gamma '(Ag2Al) precipitate phase in aluminium
Acta Mater., 174, 116-130 (2019) - A Novel Setup for In Situ Monitoring of Thermomechanically Cycled Thin Film Metallizations
The Minerals, Metals & Materials SocietyJOM, ARTN: 1543-1851 (2019) - Face centered cubic titanium in high pressure torsion processed carbon nanotubes reinforced titanium composites
ElsevierJournal of Alloys and Compounds, 939-945 (2019) - Face centered cubic titanium in high pressure torsion processed carbon nanotubes reinforced titanium composites
Journal of Alloys and Compounds, 939-945 (2019) - Evaluation of hydrogen storage perfomance of ZrTiVNiCrFe in electrochemical and gas-solid reactions
International Journal of Hydrogen Energy, 2019, ARTN 0360-3199 (2019) - Anisotropy in fracture and fatigue resistance of pearlitic steels and its effect on the crack path
Int. J. Fatigue, 124, 528-536 (2019) - On the onset of deformation twinning in the CrFeMnCoNi high-entropy alloy using a novel tensile specimen geometry
Intermetallics, 110, UNSP 106469 (2019) - Comparison of the Dislocation Structure of a CrMnN and a CrNi Austenite after Cyclic Deformation
metals 2019, 9, ARTN 784 (2019) - Evaluation of the intergranular crack growth resistance of ultrafine grained tungsten materials
Actra Materialia, 176, 330-340 (2019) - Impact of the scanning strategy on the mechanical behavior of 316L steel synthesized by selective laser melting
Journal of Manufacturing Processes, 255-261 (2019) - Microstructure and Mechanical Properties of Al-(12-20) Si Bi-Material Fabricated by Selective Laser Melting
materials, 12, ARTN 2126 (2019) - Influence of crystal orientation and Berkovich trip rotation on the mechanical characterization of grain boundaries in molybdenum
Materials and Design, 182 (2019), ARTN 107998 (2019) - Microstructure and Mechanical Properties of Al-(12-20)Si Bi-Material Fabricated by Selective Laser Melting
Materials, 12, ARTN 2126 (2019) - Microstructure and Failure Characteristics of Nanostructured Molybdenum-Cooper Composites
Advanced Engineering Materials, 2019, ARTN 1900474 (2019) - Investigation of high cyclic fatigue behaviour of thin copper films using MEMS structure
Int. Journal of Fatique, 128, ARTN 105179 (2019) - Stability of the B2 CuZr phase in Cu-Zr-Al-Sc bulk metallic glass matrix composites
J. Alloy. Compd., 790, 657-665 (2019) - High-Pressure Torsion Deformation Induced Phase Transformations and Formations: New Material Combinations and Advanced Properties
Materials Transactions, No.7, 1256-1269 (2019) - The preparation of surfactant-free highly dispersed ethylene glycol-based aluminum nitride-carbon nanofluids for heat transfer application
Advanced Powder Technology, 30/2019, 2032-2041 (2019) - Friction welding of electron beam melted Ti-6Al-4V
Materials Science & Engineering A, 761, ARTN 138045 (2019) - In situ analysis of the effect of high heating rates and initial microstructure on the formation and homogeneity of austenite
J. Mater. Sci., 54, 9197-9212 (2019) - Investigation of Zr55Cu30Al10Ni5 bulk amorphous alloy crystallization
J. Alloy. Compd., 791, 477-482 (2019) - Micromechanical and microstructural properties of tungsten fibers in the as-produced and annealed state: Assessment of the potassium doping effect
Int. J. Refract. Met. Hard Mat., 81, 253-271 (2019) - Characterization of the chips generated by the nanomachining of germanium for X-ray crystal optics
Int. J. Adv. Manuf. Technol., 102, 2757-2767 (2019) - Measurement of local strain
MRS Bulletin, Vol. 44/ Issue 6, 459-464 (2019) - Saturation of Grain Refinement during Severe Plastic Deformation of Single Phase Materials: Reconsiderations, Current Status and Open Questions
Mater. Trans., 60, 1270-1282 (2019) - The preparation of surfactant-free highly dispersed ethylene glycol-based aluminum nitride-carbon nanofluids for heat transfer application
Adv. Powder Technol., 30, 2032-2041 (2019) - Direct measurement of nanostructural change during in situ deformation of a bulk metallic glass
Naturenature communications, 2019 (10), 2445 (2019) - Exceptional fracture resistance of ultrathin metallic glass films due to an intrinsic size effect
Scientic Reports, 9, ARTN 8281 (2019) - An investigation on diffusivity while achieving a cylindrical aluminide coating on metals using simultaneous spark plasma sintering of powers
Scripta Materialia, 170(2019), 156-160 (2019) - Crack deflecting microstructure for improved electro-mechanical lifetimes of flexible systems
Mater. Lett., 244, 47-49 (2019) - Effect of TiB2 particles on microstructure and crystallographic texture of Al-12Si fabricated by selective laser melting
J. Alloy. Compd., 786, 551-556 (2019) - A study on the micro-evolution of mechanical property and microstructures in (Cu-30Fe)-2X alloys with the addition of minor alloying elements
J. Alloy. Compd., 786, 341-345 (2019) - Fracture properties of ultrafine grain chromium correlated to single dislocation processes at room temperature
Journal of Materials Research, 2019, 2370-2383 (2019) - A comparative study of glass-forming ability, crystallization kinetics and mechanical properties of Zr55Co25Al20 and Zr52Co25Al23 bulk metallic glasses
J. Alloy. Compd., 785, 422-428 (2019) - Correlating structural and mechanical properties of AlN/TiN superlattice films
Scr. Mater., 165, 159-163 (2019) - Investigation on the Relationship Between Transition Energy and the Color Change of Cu-M Alloys
Met. Mater.-Int., 25, 539-545 (2019) - Influence of annealing on microstructure and mechanical properties of ultrafine-grained Ti45Nb
Materials and Design, 179 (2019), ARTN 107864 (2019) - New approaches in lowering the gas-phase synthesis temperature of TiO2 nanoparticles by H2O-assisted atmospheric pressure CVS process
J. Mater. Res. Technol-JMRT, 8, 3024-3035 (2019) - Hydrogen-enhanced decohesion mechanism of the special E5(0 1 2) [1 0 0] grain boundary in Ni with Mo and C solutes
Computational Materials ScienceScience Direct, 167, 100-110 (2019) - Electron Irradiation Effects on Strength and Ductility of Polymer Foils Studied by Femtosecond Laser-Processed Micro-Tensile Specimens
Materials, 12, ARTN 1468 (2019) - Annealing-assisted high-pressure torsion in Zr(55)Cu(30)Al(10)Ni(5 )metallic glass
J. Alloy. Compd., 784, 1323-1333 (2019) - Dissimilar welding of Al0.1CoCrFeNi high-entropy alloy and AISI304 stainless steel
Journal of Materials Research, 34, 2683-2694 (2019) - Initiation and stagnation of room temperature grain coarsening in cyclically strained gold films
Acta Mater., 169, 99-108 (2019) - Structure-Property Relationships in Shape Memory Metallic Glass Composites
Materials, 12, ARTN 1419 (2019) - Mechanochemical synthesis and hydrogenation behavior of (TiFe)100-xNix alloys
Journal of Alloys and CompoundsElsevierScienceDirect, 796, 42-46 (2019) - Bioceramic scaffolds by additive manufacturing for controlled delivery of the antibiotic vancomycin
Proceedings of the Estonian Academy of Sciences, 68, 185-190 (2019) - In-Situ Synchotron Profile Analysis after High-Pressure Torsion Deformation
crystalsMDPI, 9, 232 (2019) - Tuning the glass forming ability and mechanical properties of Ti-based bulk metallic glasses by Ga additions
Journal of Alloys and CompoundsElsevierScience Direct, 793, 552-563 (2019) - Surface structuring by Electron Beam for improved soft tissues adhesion and reduced bacterial contamination on Ti-grade 2
J. Mater. Process. Technol., 266, 518-529 (2019) - Gradients of microstructure, stresses and mechanical properties in a multi-layered diamond thin film revealed by correlative cross-sectional nano-analytics
Carbon, 144, 666-674 (2019) - Deformation behavior of designed dual-phase CuZr metallic glasses
Mater. Des., 168, ARTN 107662 (2019) - Crystallographic orientation dependent maximum layer thickness of cubic AlN in CrN/AlN multilayers
Acta Mater., 168, 190-202 (2019) - Toughness enhancement in TiN/WN superlattice thin films
Acta Mater., 172, 18-29 (2019) - The Route to Supercurrent Transparent Ferromagnetic Barriers in Superconducting Matrix
ACS Nano 2019, 13, 5655-5661 (2019) - Ultrahigh hydrogen-sorbing palladium metallic-glass nanostructures
Materials Horizons, Communication, 1481-1487 (2019) - Biomimetic hard and tough nanoceramic Ti-Al-N film with self-assembled six-level hierarchy
Nanoscale, 2019,11, 7986-7995 (2019) - Mechanism of high-pressure torsion-induced shear banding and lamellar thickness saturation in Co-Cr-Fe-Ni-Nb high-entropy composites
Journal of Materials Research, 34, 2672-2682 (2019) - Work hardening in selective laser melted Al-12Si alloy
Material Design Processing Comm, 1, 2019;e46 (2019) - Influence of directional microstructure on mechanical properties in Al-based ultrafine bimodal lamellar structured alloy
Mat Design Process Comm., 1, e52 (2019) - Encapsulation of a gradient Al2O3 layer on hierarchical structured substrate via two-step hybrid processes
Mater. Des., 167, ARTN 107616 (2019) - Controlling the distribution of structural heterogeneities in severely deformed metallic glass
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 752, 36-42 (2019) - Atomic structure evolution of high entropy metallic glass microwires at cryogenic temperature
Scr. Mater., 163, 29-33 (2019) - Lignin-based multiwall carbon nanotubes
Composites Part A, 121, 175-179 (2019) - Chemical evolution-induced strengthening on AlCoCrNi dual-phase high-entropy alloy with high specific strength
J. Alloy. Compd., 777, 828-834 (2019) - Rate limiting deformation mechanisms of bcc metals in confined volumes
Acta Mater., 166, 687-701 (2019) - Garnet-Polymer Composite Electrolytes: New Insights on Local Li-Ion Dynamics and Electrodeposition Stability with Li Metal Anodes
ACS APPLIED ENERGY MATERIALS, 2, 1734-1746 (2019) - Fast and direct determination of fragility in metallic glasses using chip calorimetry
HELIYON, 5, ARTN e01334 (2019) - Novel electrical transport properties of native Fe-Nb oxide layers leading to unilateral conductivity of a refractory metallic glass
HELIYON, 5, ARTN e01424 (2019) - Compressive and tensile bending of sputter deposited Al/Mo bilayers
Scripta Materialia, 162, 367-371 (2019) - A comparative study on the evolution of microstructure and hardness during monotonic and cyclic high pressure torsion of CoCuFeMnNi high entropy alloy
J. Mater. Res., 34, 732-743 (2019) - Structure-stress relationships in nanocrystalline multilayered Al0.7Cr0.3N/Al0.9Cr0.1N coatings studied by cross-sectional X-ray nanodiffraction
Materials and Design, 170 (2019), 107702 (2019) - Superior Wear Resitance in EBM-Processed TC4 Alloy Compared with SLM and Forged Samples
materials, 12/5, 782 (2019) - Hydrogen storage properties of TiFe-based ternary mechanical alloys with cobalt and niobium. A thermochemical approach
International Journal of Hydrogen EnergyElsevierScience Direct, 44, 11233-11240 (2019) - The influence of crystallization conditions on the macromolecular structure and strength of y-polypropylene
Thermochimica ActaElsevier, 677 (2019), 131-138 (2019) - Effect of heat treatment on microstructure and mechanical properties of 316L steel synthesized by selective laser melting
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 748, 205-212 (2019) - Tailoring bimodal grain size structures in nanocrystalline compositionally complex alloys to improve ductility
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 748, 379-385 (2019) - Oxygen-mediated deformation and grain refinement in Cu-Fe nanocrystalline alloys
Acta Materialia, 281-293 (2019) - Estimation of diffusivity from densification data obtained during spark plasma sintering
Scr. Mater., 161, 36-39 (2019) - Design of next-generation alloys for additive manufacturing
Mat. Design Process Comm., 2019;e50, 1-4 (2019) - Retardation of Fatigue Crack Growth in Rotating Bending Specimens with Semi-Elliptical Cracks
Metals, 9, ARTN 156 (2019) - Analytical and Numerical Crack Growth Analysis of 1:3 Scaled Railway Axle Specimens
Metals, 9, ARTN 184 (2019) - Benefits of pattern formation by severe plastic deformation
Applied Materials TodayElsevierScience Direct, 236-241 (2019) - Coexistence of adjacent vacancy-ordered and eutectic phases in Al-Cu-Ni alloys
Taylor & Francis, 98/2018, 486-493 (2019) - Polymorphic Transformation and Magnetic Properties of Rapidly Solidified Fe26.7Co26.7Ni26.7Si8.9B11.0 High-Entropy Alloys
Materials, 12, ARTN 590 (2019) - Co-Cr-Mo-C-B metallic glasses with wide supercooled liquid region obtained by systematic adjustment of the metalloid ratio
Journal of Non-Crystalline Solids, 310-319 (2019) - Graphene-templated synthesis of palladium nanoplates as novel electrocatalyst for direct methanol fuel cell
Applied Surface Science, 385-392 (2019) - Direct atomic identification of cation migration induced gradual cubic-to-hexagonal phase transition in Ge2Sb2Te5
COMMUNICATIONS CHEMISTRY, 2, ARTN 13 (2019) - Influence of Processing Parameters on the Mechanical Properties of HPT-deformed Nickel/ Carbon Nanotube composites
Advanced Engineering Materials, 21(1), ARTN 1800422 (2019) - Study of Cu0 Nanowire Growth on Different Copper Surfaces
Scientific Reports, 9, ARTN 37172-8 (2019) - Characterization of strain bursts in high density polyethylene by means of a novel nano creep test
International Journal of Plasticity, 116, 297-313 (2019) - Optimizing mechanical properties of Fe26.7Co26.7Ni26.7Si8.9B11 high entropy alloy by inducing hypoeutectic to quasi-duplex microstructural transition
Sci Rep, 9, ARTN 360 (2019) - Bioinspired nacre-like alumina with a bulk-metallic glass-forming alloy as a compliant phase
nature communications, 10, 961 (2019) - Electromechanical properties of cathodic arc deposited high entropy alloy thin films on polymer substrates
J. Vac. Sci. Technol. A, 37, ARTN 010601 (2019) - Localized pore evolution assisted densification during spark plasma sintering of nanocrystalline W-5wt.%Mo alloy
Scr. Mater., 159, 41-45 (2019) - Influence of cyclic loading on the structure and double-stage structure relaxation behavior of a Zr-Cu-Fe-Al metallic glass
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 742, 526-531 (2019) - Nanostructured Metallic Materials and Composites: Processes, Properties and Microstructures
Adv. Eng. Mater., 21, ARTN 1801073 (2019) - Magnetic Binary Supersaturated Solid Solutions Processed by Severe Plastic Deformation
Nanomaterials, 9, ARTN 6 (2019) - High strength nanocrystalline Cu-Co alloys with high tensile ductility
Materials Research, 34 (1), 58-68 (2019) - Anisotropy of fracture toughness in nanostructured ceramics controlled by grain boundary design
Materials and Design, 80-85 (2019) - Evolution of structure and residual stress of a fcc/hex-A1CrN multi-layered system upon thermal loading revealed by cross-sectional Xray nano-diffraction
Acta Mater., 162, 55-66 (2019) - Crack arrest in thin metallic film stacks due to material- and residual stress inhomogeneities
Thin Solid Films, 668, 14-22 (2018) - Ultrahigh-strength low carbon steel obtained from the martensitic state via high pressure torsion
Acta Materialia, 168-177 (2018) - Oxide induced crack closure in the near threshold regime: The effect of oxide debris release
Int. J. Fatigue, 117, 21-26 (2018) - Strengthening Effects in Nano-/Ultrafine-Grained Carbon Nanotube Reinforced-Titanium Composites Investigated by Finite Element Modeling
Metall. Mater. Trans. A-Phys. Metall. Mater. Sci., 49A, 6469-6478 (2018) - Nested sampling, statistical physics and the Potts model
J. Comput. Phys., 375, 368-392 (2018) - Impact of interfaces on the radiation response and underlying defect recovery mechanisms in nanostructured Cu-Fe-Ag
Mater. Des., 160, 1148-1157 (2018) - Ultrafast Giant Photostriction of Epitaxial Strontium Iridate Film with Superior Endurance
Nano Lett., 18, 7742-7748 (2018) - Mechanical, deformation and fracture behaviors of bulk metallic glass composites reinforced by spherical B2 particles
Prog. Nat. Sci., 28, 704-710 (2018) - Structure and mechanical properties of Ti-Based alloys containing Ag subjected to a thermomechanical treatment
Journal of Alloys and Compounds, 1182-1188 (2018) - Strain-rate dependent occurrence of cleavage fracture in Fe−Si−Al alloys
Materials Science and Engineering: A, 267-276 (2018) - Structure and Thermal Properties of an Al-Based Metallic Glass-Polymer Composite
Metals, 8, met8121037 (2018) - Fracture mechanics of micro samples: Fundamental considerations
Mater. Des., 159, 252-267 (2018) - Anneal hardening and elevated temperature strain rate sensitivity of nanostructured metals: Their relation to intergranular dislocation accommodation
Acta Materialia, 409-419 (2018) - Compressive and tensile bending of sputter deposited Al/Mo bilayers
Scripta Materialia, 367-271 (2018) - Removing the oxide layer in a nanostructured aluminum alloy by local shear deformation between nanoscale phases
Powder Technology, 733-737 (2018) - Sample Size and Strain-Rate-Sensitivity Effects on the Homogeneity of High-Pressure Torsion Deformed Disks
Metallurgical and Materials Transactions A, 601-608 (2018) - Mechanical properties of the magnetocaloric intermetallic LaFe11.2Si1.8 alloy at different length scales
Acta Materialia, 40-50 (2018) - Anomalous re-ordering of Fe3Al disordered by high pressure torsion deformation
Scr. Mater., 156, 90-94 (2018) - Fracture toughness evaluation of UFG tungsten foil
Int. J. Refract. Met. Hard Mat., 76, 214-225 (2018) - Deformation characteristics of ultrafine grained and nanocrystalline iron and pearlitic steel - An in situ synchrotron investigation
Acta Mater., 160, 22-33 (2018) - Structural and mechanical characterization of heterogeneities in a CuZr-based bulk metallic glass processed by high pressure torsion
Acta Mater., 160, 147-157 (2018) - Der Werkstoff des "Ötzibeiles" - Die kupferzeitliche Beilklinge der Gletschermumie aus den ÖtztalerAlpen
BHM - Berg- und Hüttenmännische Monatshefte, 1-1 (2018) - The effect of heat treatments on pure and potassium doped drawn tungsten wires: Part II - Fracture properties
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 737, 434-447 (2018) - Constituent constraining effects on the microstructural evolution, ductility, and fracture mode of crystalline/amorphous nanolaminates
J. Alloy. Compd., 768, 88-96 (2018) - Synthesis, characterization and thermodynamic stability of nanostructured ε-iron carbonitride powder prepared by a solid-state mechanochemical route
Journal of Alloys and Compounds, 327-336 (2018) - Electro-mechanical behavior of Al/Mo bilayers studied with in situ straining methods
Thin Solid Films, 665, 131-136 (2018) - On the stacking fault energy related deformation mechanism of nanocrystalline Cu and Cu alloys: A first-principles and TEM study
Journal of Alloys and Compounds, 807-818 (2018) - Sputter deposition of Mo-based multicomponent thin films from rotatable targets: Experiment and simulation
Appl. Surf. Sci., 455, 1029-1036 (2018) - Local chemical ordering within the incubation period as a trigger for nanocrystallization of a highly supercooled Ti-based liquid
Mater. Des., 156, 504-513 (2018) - Metallic glass nanolaminates with shape memory alloys
Acta Mater., 159, 344-351 (2018) - Comparative investigation of microstructure, mechanical properties and strengthening mechanisms of Al-12Si/TiB2 fabricated by selective laser melting and hot pressing
Ceram. Int., 44, 17635-17642 (2018) - Enhancing the interface bonding in carbon nanotubes reinforced Al matrix composites by the in situ formation of TiAl3 and TiC
J. Alloy. Compd., 765, 98-105 (2018)