PhD Thesis
Conference Papers
Conference Papers
Journal Articles
Journal Articles
- Inconel-steel multilayers by liquid dispersed metal powder bed fusion: Microstructure, Residual stress and Property Gradients
Additive Manufacturing, 32, ARTN 101027 (2019) - Novel a + b Type Ti-Fe-Cu Alloys Containing Sn with Pertinent Mechanical Properties
metals, 10, 1-12 (2019) - Electrocatalytic Behavior of Hydrogenated Pd-Metallic Glass Nanofilms: Butler-Volmer, Tafel, and Impedance Analyses
Electrocatalysis, 11, 94-109 (2019) - Reversing and non-reversing effects of PEEK-HA composites on tuning cooling rate during crystallization
J. Polym. Res., 26, ARTN 279 (2019) - Fatique crack growth in railway axle specimens - Transferability and model validation
International Journal of Fatigue, 133, ARTN 105421 (2019) - Combined Fe and O effects on microstructural evolution and strengthening in Cu-Fe nanocrystalline alloys
Materials Science & Engineering, 772, ARTN 138800 (2019) - In situ fabrication of TiC-NiCr cermets by selective laser melting
International Journal of Refractory Metals & Hard Materials, 87, ARTN 105171 (2019) - Understanding structural evolution of nanostructures during deformation form 2D (3D) Experiments
IOP Conference SeriesMaterials Science and Engineering, 580, ARTN 012021 (2019) - Ultrafine-grained Tungsten by High-Pressure Torsion-Bulk precursor versus powder processing route
IOP Conference Series: Materials Science and Engineering, 580, ARTN 012051 (2019) - Application of the material inhomogeneity effect for the improvement of fracture toughness of a brittle polymer
Engineering Fracture Mechanics, 224, ARTN 106776 (2019) - Stress-controlled decomposition routes in cubic AlCrN films assessed by in-situ high-temperature high-energy grazing incidence transmission X-ray diffraction
Scientific ReportsNature, 9, ARTN 18027 (2019) - Microstructure and stress gradients in TiW thin films characterized by 40 nm X-ray diffraction and transmission electron microscopy
Thin Solid Films, 691, ARTN 137576 (2019) - Novel welding of Al0.5CoCrFeNi high-entropy alloy: Corrosion behavior
Journal of Alloys and Compounds, 817, ARTN 153163 (2019) - Growth-twins in CrN/AlN multilayers induced by hetero-phase interfaces
Acta Materialia, 185, 157-170 (2019) - The sputter performance of an industrial-scale planar Mo-target over its lifetime: Target erosion and film properties
Surface & Coatings Technology, 381, ARTN 125174 (2019) - Biegsames Glas statt Scherben
Kronen Zeitung, 19 (2019) - Investigation of high cyclic fatigue behaviour of thin copper films using MEMS structure
Int. J. Fatigue, 128, ARTN 105179 (2019) - Effect of Re on microstructural evolution and densification kinetics during spark plasma sintering of nanocrystalline W
Adv. Powder Technol., 30, 2779-2786 (2019) - Combined thermo-physical investigations of thin layers with Time Domain Thermoreflectance and Scanning Thermal Microscopy on the example of 500 nm thin, CVD grown tungsten
Thermochim. Acta, 681, ARTN 178373 (2019) - Highly ductile amorphous oxide at room temperature and high strain rate
Science, 366, 864-869 (2019) - Bioinspired toughness improvement through soft interlayers in mineral reinforced polypropylene
Mechanics of Materials, 1 40, ARTN 103243 (2019) - Tuneable Magneto-Resistance by Severe Plastic Deformation
metals, 2019, ARTN 1188 (2019) - Aluminum matrix composites reinforced with metallic glass particles with core-shell structure
Materials Science & Engineering, A 771, ARTN 138630 (2019) - On the Room-Temperature Mechanical Properties of an Ion-Irradiated TiZrNbHfTa Refractory High Entropy Alloy
JOM, 2019, ARTN 3861-6 (2019) - Development of Damage - Tolerant and Fracture-Resistant Materials by Utilizing the Material Inhomogeneity Effect
ASMEJournal of Applied Mechanics, 86, 111004-1-111004-12 (2019) - Evolution of Bimodal Microstructure and High-Temperature Wear Resistance of Al-Cu-Ni Alloys
Communication, A, ARTN 5518 (2019) - Effect of Heterophase Interfaces on Microstructure and Crystallographic Texture Evolution During Rolling of Directionally Solidified Ag-Cu Eutectic Alloy
Metall. Mater. Trans. A-Phys. Metall. Mater. Sci., 51, 368-379 (2019) - Optimizing the magnetic properties of Fe-based amorphous powder by adjusting atomic structures from vitrification at different temperatures
Journal of Applied Physics, 126, ARTN 165109 (2019) - Damage tolerance of lamellar bone
Bone, 130, ARTN 115102 (2019) - Point-defect engineering of MoN/TaN superlattice films: A first-principles and experimental study
Mater. Des., 186, ARTN 108211 (2019) - High density of genuine growth twins in electrodeposited aluminium
Materials Science, 5, eaax3894 (2019) - Mechanical properties and epitaxial growth of TiN/AlN superlattices
Surf. Coat. Technol., 375, 1-7 (2019) - New Developments in Nanomechanical Methods
JOM, 71, 3340-3342 (2019) - CROSS-SECTIONAL GRADIENTS OF RESIDUAL STRESSES, MICROSTRUCTURE AND PHASES IN A NITRIDED STEEL REVEALED BY 20 mu m SYNCHROTRON X-RAY DIFFRACTION
Metall. Ital., 6-10 (2019) - Hierarchically-structured large superelastic deformation in ferroelastic-ferroelectrics
Acta Materialia, 181/2019, 501-509 (2019) - Au–Sn solders applied in transient liquid phase bonding: Microstructure and mechanical behavior
Materialia, 8, ARTN 100503 (2019) - Coiled artificial muscles based on UHMWPE with large muscle stroke
Materials Today Communications, 21 (2019), ARTN 100688 (2019) - Microstructural characterization of medium entropy alloy thin films
Scripta Materialia, 177, 22-26 (2019) - Correlation of mechanical damage and electrical behavior of Al/Mo bilayers subjected to bending
Thin Solid Films, 687, UNSP 137480 (2019) - Water in Mesoporous Confinement: Glass-To-Liquid Transition or Freezing of Molecular Reorientation Dynamics?
Molecules, 24/2019, ARTN 3563 (2019) - The Influence of Partial Replacement of Cu with Ga on the Corrosion Behavior of Ti40Zr10Cu36Pd14 Metallic Glasses
Journal of The Electrochemical Society, 166, 485-491 (2019) - Mechanochemical reaction of Al and melamine: a potential approach towards the in situ synthesis of aluminum nitride - carbon nanotube nanocomposites
PCCP, 21, 22121-22131 (2019) - The creep behavior of a fully lamellar γ-TiAl based alloy
Intermetallics, 114, ARTN 106611 (2019) - Microstructure and mechanical property of bimodal-size metallic glass particle-reinforced Al alloy matrix composites
Journal of Alloys and Compounds, 814, ARTN 152317 (2019) - Correlating elemental distribution with mechanical properties of TiN/SiNx nanocomposite coatings
Scr. Mater., 170, 20-23 (2019) - Elastic Properties and Stacking Fault Energies of Borides, Carbides and Nitrides from First-Principles Calculations
Acta Metall. Sin.-Engl. Lett., 32, 1099-1110 (2019) - Friction and Tribo-Chemical Behavior of SPD-Processed CNT-Reinforced Composites
LUBRICANTS, 7, ARTN 75 (2019) - Mechanical Behavior of Ti6Al4V Scaffolds Filled with CaSiO3 for Implant Applications
applied sciences, 2019, ARTN 3844 (2019) - Investigation of Compatibility Between M-Cr-Al-X Thermal Spray Coatings and Third Generation y-TiAl Alloys
Journal of Materials Engineering and Performance, 8, 1059-9495 (2019) - Effect of lattice surface treatment on performance of hardmetal - titanium interpenetrating phase composites
International Journal of Refractory Metals & Hard Materials, 86, ARTN 105087 (2019) - Tungsten Matrix Composite Reinforced with CoCrFeMnNi High-Entropy Alloy: Impact of Processing Routes on Microstructure and Mechanical Properties
metals, 9, 12 (2019) - Fracture behavior and deformation mechanisms in nanolaminated crystalline/amorphous micro-cantilevers
ElsevierActa Materialia, 180 (2019), 73-83 (2019) - Thermodynamic and mechanical stability of Ni3X-type intermetallic compounds
ElsevierIntermetallics, 9 (2019) - Toughening in nanosilica-reinforced epoxy with tunable filler-matrix interface properties
Compos. Sci. Technol., 183, ARTN 107799 (2019) - Atomic resolution analyses on defects in nanocrystalline Cu-based alloys generated by severe plastic deformation
Mater. Charact., 157, ARTN 109886 (2019) - Selective laser melting of 316L stainless steel: Influence of TIB2 addition on microstructure and mechanical properties
Materials Today CommunicationsElsevier, 21, 100615 (2019) - Quasicrystalline Composites by Additive Manufacturing
Key Engineering Materials, 818, 72-76 (2019) - Modulating heterogeneity and plasticity in bulk metallic glasses: Role of interfaces on shear banding
Int. J. Plast., 119, 156-170 (2019) - Investigation of structure and mechanical properties of TiZrHfNiCuCo high entropy alloy thin films synthesized by magnetron sputtering
J. Alloy. Compd., 797, 834-841 (2019) - 20 Hz synchrotron X-ray diffraction analysis in laser-pulsed WC-Co hard metal reveals oscillatory stresses and reversible composite plastification
Int. J. Refract. Met. Hard Mat., 82, 121-128 (2019) - Evolution of the lattice defects and crystalline domain size in carbon nanotube metal matrix composites processed by severe plastic deformation
Mater. Charact., 154, 344-352 (2019) - Microstructure and mechanical properties of Al-12Si and Al-3.5 Cu-1.5Mg-1Si bimetal fabricated by selective laser melting
Journal of Materials Science & Technology, 36, 18-26 (2019) - Facile preparation of superhydrophobic wood surfaces via spraying of aqueous alkyl ketene dimer dispersions
RSC ADVANCES, 9, 24357-24367 (2019) - Compositional tuning-induced permanent color adjustment and mechanical properties: Binary Cu-Mg colored metallic system
Mater. Des., 175, ARTN 107814 (2019) - Synthesis of new glassy Mg-Ca-Zn alloys with exeptionally low Young´s Modulus: Exploring near eutectic compositions
Scripta MaterialiaScience Direct, 173, 137-143 (2019) - Resolving the FCC/HCP interfaces of the gamma '(Ag2Al) precipitate phase in aluminium
Acta Mater., 174, 116-130 (2019) - A Novel Setup for In Situ Monitoring of Thermomechanically Cycled Thin Film Metallizations
The Minerals, Metals & Materials SocietyJOM, ARTN: 1543-1851 (2019) - Face centered cubic titanium in high pressure torsion processed carbon nanotubes reinforced titanium composites
ElsevierJournal of Alloys and Compounds, 939-945 (2019) - Face centered cubic titanium in high pressure torsion processed carbon nanotubes reinforced titanium composites
Journal of Alloys and Compounds, 939-945 (2019) - Evaluation of hydrogen storage perfomance of ZrTiVNiCrFe in electrochemical and gas-solid reactions
International Journal of Hydrogen Energy, 2019, ARTN 0360-3199 (2019) - Anisotropy in fracture and fatigue resistance of pearlitic steels and its effect on the crack path
Int. J. Fatigue, 124, 528-536 (2019) - On the onset of deformation twinning in the CrFeMnCoNi high-entropy alloy using a novel tensile specimen geometry
Intermetallics, 110, UNSP 106469 (2019) - Comparison of the Dislocation Structure of a CrMnN and a CrNi Austenite after Cyclic Deformation
metals 2019, 9, ARTN 784 (2019) - Evaluation of the intergranular crack growth resistance of ultrafine grained tungsten materials
Actra Materialia, 176, 330-340 (2019) - Impact of the scanning strategy on the mechanical behavior of 316L steel synthesized by selective laser melting
Journal of Manufacturing Processes, 255-261 (2019) - Microstructure and Mechanical Properties of Al-(12-20) Si Bi-Material Fabricated by Selective Laser Melting
materials, 12, ARTN 2126 (2019) - Influence of crystal orientation and Berkovich trip rotation on the mechanical characterization of grain boundaries in molybdenum
Materials and Design, 182 (2019), ARTN 107998 (2019) - Microstructure and Mechanical Properties of Al-(12-20)Si Bi-Material Fabricated by Selective Laser Melting
Materials, 12, ARTN 2126 (2019) - Microstructure and Failure Characteristics of Nanostructured Molybdenum-Cooper Composites
Advanced Engineering Materials, 2019, ARTN 1900474 (2019) - Investigation of high cyclic fatigue behaviour of thin copper films using MEMS structure
Int. Journal of Fatique, 128, ARTN 105179 (2019) - Stability of the B2 CuZr phase in Cu-Zr-Al-Sc bulk metallic glass matrix composites
J. Alloy. Compd., 790, 657-665 (2019) - High-Pressure Torsion Deformation Induced Phase Transformations and Formations: New Material Combinations and Advanced Properties
Materials Transactions, No.7, 1256-1269 (2019) - The preparation of surfactant-free highly dispersed ethylene glycol-based aluminum nitride-carbon nanofluids for heat transfer application
Advanced Powder Technology, 30/2019, 2032-2041 (2019) - Friction welding of electron beam melted Ti-6Al-4V
Materials Science & Engineering A, 761, ARTN 138045 (2019) - In situ analysis of the effect of high heating rates and initial microstructure on the formation and homogeneity of austenite
J. Mater. Sci., 54, 9197-9212 (2019) - Investigation of Zr55Cu30Al10Ni5 bulk amorphous alloy crystallization
J. Alloy. Compd., 791, 477-482 (2019) - Micromechanical and microstructural properties of tungsten fibers in the as-produced and annealed state: Assessment of the potassium doping effect
Int. J. Refract. Met. Hard Mat., 81, 253-271 (2019) - Characterization of the chips generated by the nanomachining of germanium for X-ray crystal optics
Int. J. Adv. Manuf. Technol., 102, 2757-2767 (2019) - Measurement of local strain
MRS Bulletin, Vol. 44/ Issue 6, 459-464 (2019) - Saturation of Grain Refinement during Severe Plastic Deformation of Single Phase Materials: Reconsiderations, Current Status and Open Questions
Mater. Trans., 60, 1270-1282 (2019) - The preparation of surfactant-free highly dispersed ethylene glycol-based aluminum nitride-carbon nanofluids for heat transfer application
Adv. Powder Technol., 30, 2032-2041 (2019) - Direct measurement of nanostructural change during in situ deformation of a bulk metallic glass
Naturenature communications, 2019 (10), 2445 (2019) - Exceptional fracture resistance of ultrathin metallic glass films due to an intrinsic size effect
Scientic Reports, 9, ARTN 8281 (2019) - An investigation on diffusivity while achieving a cylindrical aluminide coating on metals using simultaneous spark plasma sintering of powers
Scripta Materialia, 170(2019), 156-160 (2019) - Crack deflecting microstructure for improved electro-mechanical lifetimes of flexible systems
Mater. Lett., 244, 47-49 (2019) - Effect of TiB2 particles on microstructure and crystallographic texture of Al-12Si fabricated by selective laser melting
J. Alloy. Compd., 786, 551-556 (2019) - A study on the micro-evolution of mechanical property and microstructures in (Cu-30Fe)-2X alloys with the addition of minor alloying elements
J. Alloy. Compd., 786, 341-345 (2019) - Fracture properties of ultrafine grain chromium correlated to single dislocation processes at room temperature
Journal of Materials Research, 2019, 2370-2383 (2019) - A comparative study of glass-forming ability, crystallization kinetics and mechanical properties of Zr55Co25Al20 and Zr52Co25Al23 bulk metallic glasses
J. Alloy. Compd., 785, 422-428 (2019) - Correlating structural and mechanical properties of AlN/TiN superlattice films
Scr. Mater., 165, 159-163 (2019) - Investigation on the Relationship Between Transition Energy and the Color Change of Cu-M Alloys
Met. Mater.-Int., 25, 539-545 (2019) - Influence of annealing on microstructure and mechanical properties of ultrafine-grained Ti45Nb
Materials and Design, 179 (2019), ARTN 107864 (2019) - New approaches in lowering the gas-phase synthesis temperature of TiO2 nanoparticles by H2O-assisted atmospheric pressure CVS process
J. Mater. Res. Technol-JMRT, 8, 3024-3035 (2019) - Hydrogen-enhanced decohesion mechanism of the special E5(0 1 2) [1 0 0] grain boundary in Ni with Mo and C solutes
Computational Materials ScienceScience Direct, 167, 100-110 (2019) - Electron Irradiation Effects on Strength and Ductility of Polymer Foils Studied by Femtosecond Laser-Processed Micro-Tensile Specimens
Materials, 12, ARTN 1468 (2019) - Annealing-assisted high-pressure torsion in Zr(55)Cu(30)Al(10)Ni(5 )metallic glass
J. Alloy. Compd., 784, 1323-1333 (2019) - Dissimilar welding of Al0.1CoCrFeNi high-entropy alloy and AISI304 stainless steel
Journal of Materials Research, 34, 2683-2694 (2019) - Initiation and stagnation of room temperature grain coarsening in cyclically strained gold films
Acta Mater., 169, 99-108 (2019) - Structure-Property Relationships in Shape Memory Metallic Glass Composites
Materials, 12, ARTN 1419 (2019) - Mechanochemical synthesis and hydrogenation behavior of (TiFe)100-xNix alloys
Journal of Alloys and CompoundsElsevierScienceDirect, 796, 42-46 (2019) - Bioceramic scaffolds by additive manufacturing for controlled delivery of the antibiotic vancomycin
Proceedings of the Estonian Academy of Sciences, 68, 185-190 (2019) - In-Situ Synchotron Profile Analysis after High-Pressure Torsion Deformation
crystalsMDPI, 9, 232 (2019) - Tuning the glass forming ability and mechanical properties of Ti-based bulk metallic glasses by Ga additions
Journal of Alloys and CompoundsElsevierScience Direct, 793, 552-563 (2019) - Surface structuring by Electron Beam for improved soft tissues adhesion and reduced bacterial contamination on Ti-grade 2
J. Mater. Process. Technol., 266, 518-529 (2019) - Gradients of microstructure, stresses and mechanical properties in a multi-layered diamond thin film revealed by correlative cross-sectional nano-analytics
Carbon, 144, 666-674 (2019) - Deformation behavior of designed dual-phase CuZr metallic glasses
Mater. Des., 168, ARTN 107662 (2019) - Crystallographic orientation dependent maximum layer thickness of cubic AlN in CrN/AlN multilayers
Acta Mater., 168, 190-202 (2019) - Toughness enhancement in TiN/WN superlattice thin films
Acta Mater., 172, 18-29 (2019) - The Route to Supercurrent Transparent Ferromagnetic Barriers in Superconducting Matrix
ACS Nano 2019, 13, 5655-5661 (2019) - Ultrahigh hydrogen-sorbing palladium metallic-glass nanostructures
Materials Horizons, Communication, 1481-1487 (2019) - Biomimetic hard and tough nanoceramic Ti-Al-N film with self-assembled six-level hierarchy
Nanoscale, 2019,11, 7986-7995 (2019) - Mechanism of high-pressure torsion-induced shear banding and lamellar thickness saturation in Co-Cr-Fe-Ni-Nb high-entropy composites
Journal of Materials Research, 34, 2672-2682 (2019) - Work hardening in selective laser melted Al-12Si alloy
Material Design Processing Comm, 1, 2019;e46 (2019) - Influence of directional microstructure on mechanical properties in Al-based ultrafine bimodal lamellar structured alloy
Mat Design Process Comm., 1, e52 (2019) - Encapsulation of a gradient Al2O3 layer on hierarchical structured substrate via two-step hybrid processes
Mater. Des., 167, ARTN 107616 (2019) - Controlling the distribution of structural heterogeneities in severely deformed metallic glass
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 752, 36-42 (2019) - Atomic structure evolution of high entropy metallic glass microwires at cryogenic temperature
Scr. Mater., 163, 29-33 (2019) - Lignin-based multiwall carbon nanotubes
Composites Part A, 121, 175-179 (2019) - Chemical evolution-induced strengthening on AlCoCrNi dual-phase high-entropy alloy with high specific strength
J. Alloy. Compd., 777, 828-834 (2019) - Rate limiting deformation mechanisms of bcc metals in confined volumes
Acta Mater., 166, 687-701 (2019) - Garnet-Polymer Composite Electrolytes: New Insights on Local Li-Ion Dynamics and Electrodeposition Stability with Li Metal Anodes
ACS APPLIED ENERGY MATERIALS, 2, 1734-1746 (2019) - Fast and direct determination of fragility in metallic glasses using chip calorimetry
HELIYON, 5, ARTN e01334 (2019) - Novel electrical transport properties of native Fe-Nb oxide layers leading to unilateral conductivity of a refractory metallic glass
HELIYON, 5, ARTN e01424 (2019) - Compressive and tensile bending of sputter deposited Al/Mo bilayers
Scripta Materialia, 162, 367-371 (2019) - A comparative study on the evolution of microstructure and hardness during monotonic and cyclic high pressure torsion of CoCuFeMnNi high entropy alloy
J. Mater. Res., 34, 732-743 (2019) - Structure-stress relationships in nanocrystalline multilayered Al0.7Cr0.3N/Al0.9Cr0.1N coatings studied by cross-sectional X-ray nanodiffraction
Materials and Design, 170 (2019), 107702 (2019) - Superior Wear Resitance in EBM-Processed TC4 Alloy Compared with SLM and Forged Samples
materials, 12/5, 782 (2019) - Hydrogen storage properties of TiFe-based ternary mechanical alloys with cobalt and niobium. A thermochemical approach
International Journal of Hydrogen EnergyElsevierScience Direct, 44, 11233-11240 (2019) - The influence of crystallization conditions on the macromolecular structure and strength of y-polypropylene
Thermochimica ActaElsevier, 677 (2019), 131-138 (2019) - Effect of heat treatment on microstructure and mechanical properties of 316L steel synthesized by selective laser melting
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 748, 205-212 (2019) - Tailoring bimodal grain size structures in nanocrystalline compositionally complex alloys to improve ductility
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 748, 379-385 (2019) - Oxygen-mediated deformation and grain refinement in Cu-Fe nanocrystalline alloys
Acta Materialia, 281-293 (2019) - Estimation of diffusivity from densification data obtained during spark plasma sintering
Scr. Mater., 161, 36-39 (2019) - Design of next-generation alloys for additive manufacturing
Mat. Design Process Comm., 2019;e50, 1-4 (2019) - Retardation of Fatigue Crack Growth in Rotating Bending Specimens with Semi-Elliptical Cracks
Metals, 9, ARTN 156 (2019) - Analytical and Numerical Crack Growth Analysis of 1:3 Scaled Railway Axle Specimens
Metals, 9, ARTN 184 (2019) - Benefits of pattern formation by severe plastic deformation
Applied Materials TodayElsevierScience Direct, 236-241 (2019) - Coexistence of adjacent vacancy-ordered and eutectic phases in Al-Cu-Ni alloys
Taylor & Francis, 98/2018, 486-493 (2019) - Polymorphic Transformation and Magnetic Properties of Rapidly Solidified Fe26.7Co26.7Ni26.7Si8.9B11.0 High-Entropy Alloys
Materials, 12, ARTN 590 (2019) - Co-Cr-Mo-C-B metallic glasses with wide supercooled liquid region obtained by systematic adjustment of the metalloid ratio
Journal of Non-Crystalline Solids, 310-319 (2019) - Graphene-templated synthesis of palladium nanoplates as novel electrocatalyst for direct methanol fuel cell
Applied Surface Science, 385-392 (2019) - Direct atomic identification of cation migration induced gradual cubic-to-hexagonal phase transition in Ge2Sb2Te5
COMMUNICATIONS CHEMISTRY, 2, ARTN 13 (2019) - Influence of Processing Parameters on the Mechanical Properties of HPT-deformed Nickel/ Carbon Nanotube composites
Advanced Engineering Materials, 21(1), ARTN 1800422 (2019) - Study of Cu0 Nanowire Growth on Different Copper Surfaces
Scientific Reports, 9, ARTN 37172-8 (2019) - Characterization of strain bursts in high density polyethylene by means of a novel nano creep test
International Journal of Plasticity, 116, 297-313 (2019) - Optimizing mechanical properties of Fe26.7Co26.7Ni26.7Si8.9B11 high entropy alloy by inducing hypoeutectic to quasi-duplex microstructural transition
Sci Rep, 9, ARTN 360 (2019) - Bioinspired nacre-like alumina with a bulk-metallic glass-forming alloy as a compliant phase
nature communications, 10, 961 (2019) - Electromechanical properties of cathodic arc deposited high entropy alloy thin films on polymer substrates
J. Vac. Sci. Technol. A, 37, ARTN 010601 (2019) - Localized pore evolution assisted densification during spark plasma sintering of nanocrystalline W-5wt.%Mo alloy
Scr. Mater., 159, 41-45 (2019) - Influence of cyclic loading on the structure and double-stage structure relaxation behavior of a Zr-Cu-Fe-Al metallic glass
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 742, 526-531 (2019) - Nanostructured Metallic Materials and Composites: Processes, Properties and Microstructures
Adv. Eng. Mater., 21, ARTN 1801073 (2019) - Magnetic Binary Supersaturated Solid Solutions Processed by Severe Plastic Deformation
Nanomaterials, 9, ARTN 6 (2019) - High strength nanocrystalline Cu-Co alloys with high tensile ductility
Materials Research, 34 (1), 58-68 (2019) - Anisotropy of fracture toughness in nanostructured ceramics controlled by grain boundary design
Materials and Design, 80-85 (2019) - Evolution of structure and residual stress of a fcc/hex-A1CrN multi-layered system upon thermal loading revealed by cross-sectional Xray nano-diffraction
Acta Mater., 162, 55-66 (2019)
Master Thesis
Master Thesis
- Nanoidentation response of single crystal copperfilms on sapphire
(2019) - Effects of alloying and fluxing treatment on thermal, magnetic and structural properties of Fe-(Ni, Co)-P-C metallic glass ribbons
(2019) - Comparative study on the miscibility of Cu-Fe-Co compounds processed by methods of severe deformation
(2019) - Deformation Mechanisms in Metallic Glasses: An Atomistic Study
(2019) - The role of adhesion layers on the interfacial reliability of multilayer insulators
(2019) - Mechanical, Physical and Structural Investigation of Severe Plastically Deformed CuZr-Based Metallic Glasses
(2019)