PhD Thesis
PhD Thesis
Conference Papers
Conference Papers
Journal Articles
Journal Articles
- Microstructure, strength and fracture toughness of CuNb nanocomposites processed with high pressure torsion using multi-sector disks
Scr. Mater., 189, 48-52 (2020) - Influence of combinatorial annealing and plastic deformation treatments on the intrinsic properties of Cu46Zr46Al8 bulk metallic glass
Intermetallics, 127, ARTN 106986 (2020) - Two-dimensional SnO ultrathin epitaxial films: Pulsed laser deposition growth and quantum confinement effects
Physica B, 599, ARTN 412467 (2020) - Selective laser melting of high-strength, low-modulus Ti-35Nb-7Zr-5Ta alloy
MATERIALIA, 14, ARTN 100941 (2020) - Phase change memory based on Ta-Sb-Te alloy -Towards a universal memory
MATERIALS TODAY PHYSICS, 15, ARTN 100266 (2020) - Effective electrocatalytic methanol oxidation of Pd-based metallic glass nanofilms
Nanoscale, 12, 22586-22595 (2020) - In situ high-energy X-ray diffraction study of thermally -activated martensitic transformation far below room temperature in CuZr-based bulk metallic glass composites
J. Alloy. Compd., 841, ARTN 155781 (2020) - A new approach to evaluate the elastic modulus of metallic foils
Mater. Des., 196, ARTN 109149 (2020) - The role of crystallographic texture on mechanically induced grain boundary migration
Acta Mater., 200, 404-416 (2020) - Strain Induced Anisotropic Magnetic Behaviour and Exchange Coupling Effect in Fe-SmCo5 Permanent Magnets Generated by High Pressure Torsion
Crystals, 10, ARTN 1026 (2020) - Surface oxidation of nanocrystalline CVD TiB2 hard coatings revealed by cross-sectional nano-analytics and in-situ micro-cantilever testing
Surf. Coat. Technol., 399, ARTN 126181 (2020) - Nanoindentation and microbending analyses of glassy and crystalline Zr (-Hf)-Cu thin-film alloys
Surf. Coat. Technol., 399, ARTN 126139 (2020) - Nanoscale stress distributions and microstructural changes at scratch track cross-sections of a deformed brittle-ductile CrN-Cr bilayer
Mater. Des., 195, ARTN 109023 (2020) - Selective Laser Melting of Aluminum and Its Alloys
MATERIALS, 13, ARTN 4564 (2020) - Nd3+ ions induced rational morphology control of transition metal oxides for high energy storage performance
J. Power Sources, 472, ARTN 228599 (2020) - Effect of Carbon in Severe Plastically Deformed Metals
Adv. Eng. Mater., 22, ARTN 2000879 (2020) - Severe Plastic Deformation and Thermomechanical Processing: Nanostructuring and Properties
METALS, 10, ARTN 1306 (2020) - Intrinsic and extrinsic effects on the brittle-to-ductile transition in metallic glasses
J. Appl. Phys., 128, ARTN 125102 (2020) - Effect of TiB(2)particle size on the material transfer behaviour of Cu-TiB(2)composites
Mater. Sci. Technol., 36:15, 1685-1694 (2020) - Multi-scale interface design of strong and damage resistant hierarchical nanostructured materials
Mater. Des., 196, ARTN 109169 (2020) - Atomic-scale study on incoherent twin boundary evolution in nanograined Cu
Scr. Mater., 186, 278-281 (2020) - In-operando fatigue behavior of gold metallization lines on polyimide substrate
Scr. Mater., 186, 48-51 (2020) - Thermal stabilization of metal matrix nanocomposites by nanocarbon reinforcements
Scr. Mater., 186, 202-207 (2020) - Fracture properties of thin film TiN at elevated temperatures
Mater. Des., 194, ARTN 108885 (2020) - Verification of the generalised chemical potential for stress-driven hydrogen diffusion in nickel
Philos. Mag. Lett., 2020, ARTN 1808253 (2020) - EBSD characterization of pure and K -doped tungsten fibers annealed at different temperatures
J. Nucl. Mater., 537, UNSP 152201 (2020) - Atomic -scale investigation on the structural evolution and deformation behaviors of Cu-Cr nanocrystalline alloys processed by high-pressure torsion
J. Alloy. Compd., 832, ARTN 154994 (2020) - Influence of TiO 2 charge and BSA -metal ion complexation on retention of Cr (VI) in ultrafiltration process
J. Alloy. Compd., 832, ARTN 153986 (2020) - Balancing the electro-mechanical and interfacial performance of Mo-based alloy films
MATERIALIA, 12, ARTN 100774 (2020) - Thermomechanical and structural characterization of polybutadiene/poly(ethylene oxide)/CNT stretchable electrospun fibrousmembranes
Polym. Adv. Technol., 2020, 248-261 (2020) - Balancing the strength and ductility of graphene oxide-carbon nanotube hybrid reinforced aluminum matrix composites with bimodal grain distribution
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 796, ARTN 140067 (2020) - Novel intermetallic-reinforced near-alpha Ti alloys manufactured by spark plasma sintering
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 792, ARTN 139798 (2020) - Achieving work hardening by forming boundaries on the nanoscale in a Ti-based metallic glass matrix composite
J. Mater. Sci. Technol., 50, 192-203 (2020) - Mapping the mechanical properties in nitride coatings at the nanometer scale
Acta Mater., 194, 343-353 (2020) - Metallic Glass Films with Nanostructured Periodic Density Fluctuations Supported on Si/SiO(2)as an Efficient Hydrogen Sorber
Chem.-Eur. J., 26, 8244-8253 (2020) - Fatigue crack threshold analysis of TiAl SENT and CC specimens - Influence of starter notch and precracking
Intermetallics, 121, ARTN 106770 (2020) - Extraordinary high-temperature behavior of electrically conductive Hf7B23Si22C6N40 ceramic film
Surf. Coat. Technol., 391, ARTN 125686 (2020) - Effect of tempering and deep cryogenic treatment on microstructure and mechanical properties of Cr-Mo-V-Ni steel
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 787, ARTN 139520 (2020) - The Relationships of Microscopic Evolution to Resistivity Variation of a FIB-Deposited Platinum Interconnector
MICROMACHINES, 11, ARTN 588 (2020) - Mechanical and optical degradation of flexible optical solar reflectors during simulated low earth orbit thermal cycling
Acta Astronaut., 175, 277-289 (2020) - Microstructural evolution of W-10Re alloys due to thermal cycling at high temperatures and its impact on surface degradation
Int. J. Refract. Met. Hard Mat., 92, ARTN 105285 (2020) - Microscopic Mechanism of Carbon-Dopant Manipulating Device Performance in CGeSbTe-Based Phase Change Random Access Memory
ACS Appl. Mater. Interfaces, 12, 23051-23059 (2020) - Hydrogen Trapping in bcc Iron
MATERIALS, 13, ARTN 2288 (2020) - Temperature dependence of surface and grain boundary energies from first principles
Phys. Rev. B, 101, ARTN 174103 (2020) - High pressure torsion induced lowering of Young's modulus in high strength TNZT alloy for bio-implant applications
J. Mech. Behav. Biomed. Mater., 108, UNSP 103839 (2020) - Synthesis of nanodiamond reinforced silver matrix nanocomposites: Microstructure and mechanical properties
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 782, ARTN 139254 (2020) - Premature failure of an additively manufactured material
NPG Asia Mater., 12, ARTN 30 (2020) - Microstructure, Texture, and Strength Development during High-Pressure Torsion of CrMnFeCoNi High-Entropy Alloy
Crystals, 10, ARTN 336 (2020) - The effect of grain size on the fatigue overload behaviour of nickel
Mater. Des., 189, ARTN 108526 (2020) - Influence of WC-Co hard metal microstructure on defect density, initiation and propagation kinetics of fatigue cracks starting at intrinsic and artificial defects under a negative stress ratio
Acta Mater., 188, 30-39 (2020) - An SEM compatible plasma cell for in situ studies of hydrogen-material interaction
Rev. Sci. Instrum., 91, ARTN 043705 (2020) - Open-cell tungsten nanofoams: Chloride ion induced structure modification and mechanical behavior
Results Phys., 17, ARTN 103062 (2020) - Oligoether Ester-Functionalized ProDOT Copolymers on Si/Monolayer Graphene as Capacitive Thin Film Electrodes
J. Electrochem. Soc., 167, ARTN 070543 (2020) - A Modified Electrochemical Nanoindentation Setup for Probing Hydrogen-Material Interaction Demonstrated on a Nickel-Based Alloy
JOM, 72, 2020-2029 (2020) - Fatigue crack growth model including load sequence effects - Model development and calibration for railway axle steels
Int. J. Fatigue, 132, ARTN 105377 (2020) - Nanoscale evolution of stress concentrations and crack morphology in multilayered CrN coating during indentation: Experiment and simulation
Mater. Des., 188, ARTN 108478 (2020) - Metal flow behavior of P/M connecting rod preform in flashless forging based on isothermal compression and numerical simulation
J. Mater. Res. Technol-JMRT, 9, 1200-1209 (2020) - Strain perceptibility of elements on the diffusion in Zr-based amorphous alloys
Sci Rep, 10, ARTN 4575 (2020) - Study on Ca Segregation toward an Epitaxial Interface between Bismuth Ferrite and Strontium Titanate
ACS Appl. Mater. Interfaces, 12, 12264-12274 (2020) - Fatigue crack growth in full-scale railway axles - Influence of secondary stresses and load sequence effects
Int. J. Fatigue, 132, ARTN 105360 (2020) - Probing defect relaxation in ultra-fine grained Ta using micromechanical spectroscopy
Acta Materialia, 185, 309-319 (2020) - Non-destructive Testing of Thin Birch (Betula pendula Roth.) Veneers
BioResources, 15, 1265-1281 (2020) - Stability, elasticity and electronic structures of Co-Zr binary intermetallic compounds
Philos. Mag., 2020, ISSN 1478-6435 (2020) - The effect of anisotropic microstructure on the crack growth and fatigue overload behaviour of ultrafine-grained nickel
Acta Mater., 184, 225-240 (2020) - Sputter deposition of NiW films from a rotatable target
Appl. Surf. Sci., 511, ARTN 145616 (2020) - Ageing Behaviour of Al-Mg-Si Alloys After Cryogenic and Room Temperature Deformation
materials, 13, ARTN 13030554 (2020) - Angular resolved mass-energy analysis of species emitted from a dc magnetron sputtered NiW-target
J. Vac. Sci. Technol. A, 38, ARTN 023401 (2020) - Microstructural evolution during heating of CNT/Metal Matrix Composites processed by Severe Plastic Deformation
Sci Rep, 10:857, ARTN 57946-3 (2020) - Magnetic dilution by severe plastic deformation
AIP Advances, 10, ARTN 015210 (2020) - 4-aminophenyl sulfone (APS) as novel monomer in fabricating paper based TFC composite for forward osmosis: Selective layer optimization
Journal of Environmental Chemical Engineering, 8, ARTN 103664 (2020) - Microstructures, Mechanical Properties, and Corrosion Behaviors of Refractory High-Entropy ReTaWNbMo Alloys
J. Mater. Eng. Perform., 29, 399-409 (2020) - Tailoring ultra-strong nanocrystalline tungsten nanofoams by reverse phase dissolution
Acta MaterialiaElsevier, 182, 215-225 (2020)