PhD Thesis

PhD Thesis

Conference Papers

Conference Papers

Journal Articles

Journal Articles

  • Probing the stability, adhesion strength, and fracture mechanism of Mg/ Al2Y interfaces via first-principles calculations
    Y. Zhou, H. Wang, Q. Dong, J. Tan, X. Chen, B. Jiang, F. Pan, J. Eckert
    MATERIALS TODAY COMMUNICATIONS33, ARTN 104612 (2022)
  • Selective laser melting of in-situ CoCrFeMnNi high entropy alloy: Effect of remelting
    J. Karimi, L. Kollo, R. Rahmani, P. Ma, Y.D. Jia, K.G. Prashanth
    J. Manuf. Process.84, 55-63 (2022)
  • Optimal tensile properties of laser powder bed fusion hereditary basket-weave microstructure in additive manufactured Ti6Al4V
    S.L. Lu, Z.J. Zhang, R. Liu, X.H. Zhou, X.G. Wang, B.N. Zhang, X.M. Zhao, J. Eckert, Z.F. Zhang
    Addit. Manuf.59, ARTN 103092 (2022)
  • Local microstructural evolution and the role of residual stresses in the phase stability of a laser powder bed fused cold-work tool steel
    J. Platl, S. Bodner, H. Leitner, C. Turk, M.A. Nielsen, J. Keckes, R. Schnitzer
    Mater. Charact.193, ARTN 112318 (2022)
  • New-generation biocompatible Ti-based metallic glass ribbons for flexible implants
    E. Yuece, L. Zarazua-Villalobos, B. Ter-Ovanessian, E. Sharifikolouei, Z. Najmi, F. Spieckermann, J. Eckert, B. Sarac
    Mater. Des.223, ARTN 111139 (2022)
  • Direct Formation of Hard-Magnetic Tetrataenite in Bulk Alloy Castings
    Y. Ivanov, B. Sarac, S. Ketov, J. Eckert, L. Greer
    ADVANCED SCIENCE2204315, 1-8 (2022)
  • Microstructure and Nanoindentation Creep Behavior of Binary Al-Cu Alloy Synthesized at High Pressure
    P. Ma, Z. Zhang, X. Liu, X. Shi, K.G. Prashanth, Y. Jia
    JOM12345, 1-8 (2022)
  • Effect of a single overload on the cyclic R-curve behaviour of a gamma-TiAl TNM alloy
    A. Lintner, R. Pippan, M. Schloffer, A. Hohenwarter
    Int. J. Fatigue163, ARTN 107083 (2022)
  • Effect of powder bed preheating on the crack formation and microstructure in ceramic matrix composites fabricated by laser powder-bed fusion process
    H.S. Maurya, K. Kosiba, K. Juhani, F. Sergejev, K.G. Prashanth
    Addit. Manuf.58, ARTN 103013 (2022)
  • MEMS-Based in situ electron-microscopy investigation of rapid solidification and heat treatment on eutectic Al-Cu
    P. Dumitraschkewitz, M.A. Tunes, C.R. Quick, D.S.R. Coradini, T.M. Kremmer, P. Ramasamy, P.J. Uggowitzer, S. Pogatscher
    Acta Mater.239, ARTN 118225 (2022)
  • Designing lightweight multicomponent magnesium alloys with exceptional strength and high stiffness
    Z. Gu, Y. Zhou, Q. Dong, G. He, J. Cui, J. Tan, X. Chen, B. Jiang, F. Pan, J. Eckert
    Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process.855, ARTN 143901 (2022)
  • Enhancement in strength and thermal stability of selective laser melted Al-12Si by introducing titanium nanoparticles
    J.F. Qi, C.Y. Liu, Z.W. Chen, Z.Y. Liu, J.S. Tian, J. Feng, I.V. Okulov, J. Eckert, P. Wang
    Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process.855, ARTN 143833 (2022)
  • Fatigue of copper films subjected to high-strain rate thermo-mechanical pulsing
    S. Moser, M. Kleinbichler, J. Zechner, M. Reisinger, M. Nelhiebel, M.C. Cordill
    Microelectron. Reliab.137, ARTN 114782 (2022)
  • Electroless Ni-P-MoS2-Al2O3 Composite Coating with Hard and Self-Lubricating Properties
    S. Mohanty, N. Jamal, A.K. Das, K.G. Prashanth
    MATERIALS15, ARTN 6806 (2022)
  • Crack propagation resistance of TiAl alloys
    R. Pippan, A. Hohenwarter
    MRS Bull.47, 1-8 (2022)
  • Ti6Al4V Coating on 316L Substrate by Laser-based Fusion Process
    R. Shukla, K.G. Prashanth
    Trans. Indian Inst. Met.124, 1-10 (2022)
  • Influence of the 1% Ti content on microstructure, friction coefficient and contribution to the strengthening mechanisms in the Al20Sn1Cu alloy
    M.C. Lucchetta, P. Ramasamy, F. Saporiti, J. Eckert, F. Audebert
    RESULTS IN ENGINEERING15, ARTN 100506 (2022)
  • Precipitation-based grain boundary design alters Inter- to Trans-granular Fracture in AlCrN Thin Films
    M. Meindlhumer, T. Ziegelwanger, J. Zalesak, M. Hans, L. Loefler, S. Spor, N. Jaeger, A. Stark, H. Hruby, R. Daniel, D. Holec, J.M. Schneider, C. Mitterer, J. Keckes
    Acta Mater.237, ARTN 118156 (2022)
  • Interface-related deformation phenomena in metallic glass/high entropy nanolaminates
    Q. Xu, D. Sopu, X. Yuan, D. Kiener, J. Eckert
    Acta Mater.237, ARTN 118191 (2022)
  • Influence of Processing Route on the Fracture Resistance of Equal Channel Angular Pressing Deformed Iron
    A. Hohenwarter, R. Pippan
    Adv. Eng. Mater.2201011, ARTN 2201011 (2022)
  • A measurement structure for in-situ electrical monitoring of cyclic delamination
    S. Moser, D. Tscharnuter, M. Nelhiebel, M. Reisinger, J. Zechner, M.J. Cordill
    Surf. Coat. Technol.445, ARTN 128715 (2022)
  • High-Entropy Alloy-Induced Metallic Glass Transformation: Challenges Posed by in situ Alloying via Additive Manufacturing
    S. Hadibeik, F. Spieckermann, M. Nosko, F. Khodabakhshi, M.H. Sohi, J. Eckert
    Adv. Eng. Mater.220764, ARTN 2200764 (2022)
  • Effect of Wear Debris Entrapment on the Tribological Performance of AlCoCrFeNi Produced by Selective Laser Melting or Spark Plasma Sintering
    J. Karimi, M. Antonov, K.G. Prashanth
    Metall. Mater. Trans. A-Phys. Metall. Mater. Sci.12345, 1-7 (2022)
  • Prior beta grain evolution and phase transformation of selective laser melted Ti6Al4V alloy during heat treatment
    S.L. Lu, Z.J. Zhang, R. Liu, Z. Qu, B. Wang, X.H. Zhou, J. Eckert, Z.F. Zhang
    J. Alloy. Compd.914, ARTN 165235 (2022)
  • Carbon nanotube-polybutadiene-poly(ethylene oxide)-based composite fibers: Role of cryogenic treatment on intrinsic properties
    R. Gurbuz, B. Sarac, V. Soprunyuk, A. Rezvan, E. Yuce, W. Schranz, J. Eckert, A. Ozcan, A.S. Sarac
    Polym. Adv. Technol.5828, 1-11 (2022)
  • Conditions near a crack tip: Advanced experiments for dislocation analysis and local strain measurement
    C. Gammer, D. An
    MRS Bull.47, 1-8 (2022)
  • Mechanical Property Evaluation of CuNb Composites Manufactured with High-Pressure Torsion
    D. Frazer, R.C. Connick, C. Howard, M. Siddiqui, R. Fritz, P. Kutlesa, P. Hosemann
    JOM123, 1-10 (2022)
  • Magnetron Sputtered Non-Toxic and Precious Element-Free Ti-Zr-Ge Metallic Glass Nanofilms with Enhanced Biocorrosion Resistance
    B. Sarac, M. Micusik, B. Putz, S. Wurster, E. Sharifikolouei, L. Xi, M. Omastova, F. Spieckermann, C. Mitterer, J. Eckert
    Adv. Mater. Interfaces123, ARTN 2201223 (2022)
  • Achieving 1 GPa fatigue strength in nanocrystalline 316L steel through recovery annealing
    O. Renk, A. Hohenwarter, C. Gammer, J. Eckert, R. Pippan
    Scr. Mater.217, ARTN 114773 (2022)
  • On the transition of failure control from material-intrinsic defects to defects forming during monotonically increasing and cyclic mechanical loading in WC-Co hard metal at elevated temperature
    T. Klunsner, T. Lube, P. Pichler, M. Krobath, L. Walch, K. Maier, W. Ecker, S. Marsoner, C. Czettl, R. Pippan
    Acta Mater.235, ARTN 118087 (2022)
  • Hybrid metal-ceramic biomaterials fabricated through powder bed fusion and powder metallurgy for improved impact resistance of craniofacial implants
    R. Rahmani, N. Kamboj, M. Brojan, M. Antonov, K.G. Prashanth
    MATERIALIA24, ARTN 101465 (2022)
  • Influence of Hatch Strategy on Crystallographic Texture Evolution, Mechanical Anisotropy of Laser Beam Powder Bed Fused S316L Steel
    S. Bodner, K. Hlushko, K. Kutlesa, J. Todt, O. Renk, M. Meindlhumer, F. Resch, M.A. Nielsen, J. Keckes, J. Eckert
    Adv. Eng. Mater.1234, ARTN 2200524 (2022)
  • TMS LDI: ACCELERATING DIVERSE LEADERSHIP ACROSS EVERY LEVEL OF THE SOCIETY
    J.D. Madison, M.J. Cordill
    JOM (2022)
  • Antibacterial activity, cytocompatibility, and thermomechanical stability of Ti40Zr10Cu36Pd14 bulk metallic glass
    A. Rezvan, E. Sharifikolouei, A. Lassnig, V. Soprunyuk, C. Gammer, F. Spieckermann, W. Schranz, Z. Najmi, A. Cochis, A.C. Scalia, L. Rimondini, M. Manfredi, J. Eckert, B. Sarac
    MATERIALS TODAY BIO16, ARTN 100378 (2022)
  • Microstructure, Mechanical Properties, and Corrosion Behavior of 06Cr15Ni4CuMo Processed by Using Selective Laser Melting
    J. Maya, K. Sivaprasad, G.V.S. Kumar, R. Baitimerov, P. Lykov, K.G. Prashanth
    METALS12, ARTN 1303 (2022)
  • Atomic-scale understanding of the structural evolution of TiN/AlN superlattice during nanoindentation - Part 1: Deformation
    Z. Chen, Y. Zheng, Y. Huang, Z. Gao, H. Sheng, M. Bartosik, P.H. Mayrhofer, Z. Zhang
    Acta Mater.234, ARTN 118008 (2022)
  • Atomic-scale understanding of the structural evolution in TiN/AlN superlattice during nanoindentation-Part 2: Strengthening
    Z. Chen, Y. Zheng, Y. Huang, Z. Gao, H. Sheng, M. Bartosik, P. Mayrhofer, Z. Zhang
    Acta Mater.234, ARTN 118009 (2022)
  • Selective Laser Melting of TiC-Based Cermet: HIP Studies
    H.S. Maurya, L. Kollo, M. Tarraste, K. Juhani, F. Sergejev, K.G. Prashanth
    Trans. Indian Inst. Met., 98-105 (2022)
  • Wire Arc Additive Manufacturing of NiTi 4D Structures: Influence of Interlayer Delay
    S. Singh, I.A. Palani, C.P. Paul, A. Funk, K.G. Prashanth
    3D Print. Addit. Manuf.123, 1-8 (2022)
  • Effect of TiB2 addition on the mechanical and biological response of spark plasma sintered Ti6Al7Nb matrix composites
    N. Singh, R. Ummethala, K.B. Surreddi, J. Jayaraj, R. Sokkalingam, M. Rajput, K. Chatterjee, K.G. Prashanth
    J. Alloy. Compd.924, ARTN 166502 (2022)
  • A novel crack-free Ti-modified Mo alloy designed for laser powder bed fusion
    C. Zhang, P. Wang, C.Y. Liu, Z.Y. Liu, M.W. Wu, X.H. Gao, M.H. LI, C. Yang, K.G. Prashanth, Z.W. Chen
    J. Alloy. Compd.910, ARTN 164802 (2022)
  • Tribological investigations of Mo films deposited on thin polyimide substrates
    E. Kobierska, S. Zak, S. Hirn, M.J. Cordill, R. Franz, M.R. de Figueiredo
    Surf. Coat. Technol.442, ARTN 128549 (2022)
  • Effect of preheating and cooling of the powder bed by laser pulse shaping on the microstructure of the TiC based cermets
    H.S. Maurya, L. Kollo, K. Juhani, F. Sergejev, K.G. Prashanth
    Ceram. Int.48, 20612-20618 (2022)
  • Fabrication of stainless-steel microfibers with amorphous-nanosized microstructure with enhanced mechanical properties
    E. Sharifikolouei, B. Sarac, Y. Zheng, P. Bala, J. Eckert
    Sci Rep12, ARTN 10784 (2022)
  • Mitigating the detrimental effects of galvanic corrosion by nanoscale composite architecture design
    O. Renk, I. Weissensteiner, M. Cihova, E.-M. Steyskal, N.G. Sommer, M. Tkadletz, S. Pogatscher, P. Schmutz, J. Eckert, P.J. Uggowitzer, R. Pippan, A.M. Weinberg
    NPJ MATERIALS DEGRADATION6, ARTN 47 (2022)
  • Mapping Shear Bands in Metallic Glasses: From Atomic Structure to Bulk Dynamics
    H. Sheng, D. Sopu, S. Fellner, J. Eckert, C. Gammer
    Phys. Rev. Lett.128, ARTN 245501 (2022)
  • Film thickness and architecture effects in biaxially strained polymer supported Al/Mo bilayers
    M.J. Cordill, P. Kreiml, B. Putz, C.O.W. Trost, A. Lassnig, C. Mitterer, D. Faurie, P.-O. Renault
    MATERIALS TODAY COMMUNICATIONS31, ARTN 103455 (2022)
  • Synthesis and structure of refractory high entropy alloy thin films based on the MoNbTaW system
    G. Gruber, A. Lassnig, S. Zak, C. Gammer, M.J. Cordill, R. Franz
    Surf. Coat. Technol.439, ARTN 128446 (2022)
  • Thermoplasticity of metallic glasses: Processing and applications
    B. Sarac, J. Eckert
    Prog. Mater. Sci.127, ARTN 100941 (2022)
  • Technical Note: Hardness, Corrosion Behavior, and Microstructural Characteristics of a Selective Laser Melted 17-4 PH Steel
    P. Chaitanya, R. Goud, R. Raghavan, M. Ramakrishna, K.G. Prashanth, S. Gollapudi
    Corrosion78, 465-472 (2022)
  • Additive Manufacturing of CoCrFeMnNi High-Entropy Alloy/AISI 316L Stainless Steel Bimetallic Structures
    R. Sokkalingam, Z. Chao, K. Sivaprasad, V. Muthupandi, J. Jayaraj, P. Ramasamy, J. Eckert, K.G. Prashanth
    Adv. Eng. Mater.1234, ARTN 2200341 (2022)
  • Configurational force based analysis of creep crack growth
    O. Kolednik, A. Tiwari, C. Posch, M. Kegl
    Int. J. Fract.2022, 1-25 (2022)
  • High-Throughput Micromechanical Testing Enabled by Optimized Direct Laser Writing
    A. Jelinek, S. Zak, M. Alfreider, D. Kiener
    Adv. Eng. Mater.2022, ARTN 2200288 (2022)
  • Redeposition layer formation caused by shading effect during sputter cleaning and associated damage on rake face of TiN coated high-speed steel drills
    J. Kampichler, Z.L. Zhang, T. Kluensner, B. Sartory, J. Wosik, F. Nahif
    Surf. Coat. Technol.438, ARTN 128412 (2022)
  • Mechanical Properties, Microstructure, and Actuation Behavior of Wire Arc Additive Manufactured Nitinol: Titanium Bimetallic Structures
    S. Singh, E. Demidova, N. Resnina, S. Belyaev, I.A. Palani, C.P. Paul, A. Kumar, K.G. Prashanth
    3D Print. Addit. Manuf.9, 98-105 (2022)
  • Effect of Powder Characteristic and Aging Treatment on the Corrosion Behavior of Selective Laser Melted Al-20Si Alloy
    P. Ma, Z. Zhang, Y. Ke, S. Yang, K. Deng, P. Cheng, H. Chen, K.G. Prashanth
    Trans. Indian Inst. Met. (2022)
  • Interaction of crack and hole: effects on crack trajectory, crack driving force and fracture toughness
    D. Brescakovic, M. Kegl, O. Kolednik
    Int. J. Fract.88, 1-26 (2022)
  • Ti6Al7Nb-TiB nanocomposites for ortho-implant applications
    N. Singh, V. Edachery, M. Rajput, K. Chatterjee, S.V. Kailas, K.G. Prashanth
    J. Mater. Res.1234, 98-105 (2022)
  • A novel approach for determining the stress intensity factor for cracks in multilayered cantilevers
    M. Sistaninia, O. Kolednik
    Eng. Fract. Mech.266, ARTN 108386 (2022)
  • Atomistic mechanisms underlying plasticity and crack growth in ceramics: a case study of AlN/TiN superlattices
    N. Koutna, L. Loefler, D. Holec, Z. Chen, Z. Zhang, L. Hultman, P.H. Mayrhofer, D.G. Sangiovanni
    Acta Mater.229, ARTN 117809 (2022)
  • Deformation-induced medium-range order changes in bulk metallic glasses
    K. Nomoto, B. Li, C. Gammer, A.V. Ceguerra, H. Bilal, A. Hohenwarter, J. Eckert, B. Gludovatz, S.P. Ringer, J.J. Kruzic
    Phys. Rev. Mater.6, ARTN 043603 (2022)
  • Subtle change in the work hardening behavior of fcc materials processed by selective laser melting
    R. Sokkalingam, K. Sivaprasad, N. Singh, V. Muthupandi, P. Ma, Y.D. Jia, K.G. Prashanth
    PROGRESS IN ADDITIVE MANUFACTURING7, 453-461 (2022)
  • Effect of the Laser Processing Parameters on the Selective Laser Melting of TiC-Fe-Based Cermets
    H. Maurya, L. Kollo, M. Tarraste, K. Juhani, F. Sergejev, K. Prashanth
    JOURNAL OF MANUFACTURING AND MATERIALS PROCESSING6, ARTN 35 (2022)
  • Linking through-thickness cracks in metallic thin films to in-situ electrical resistance peak broadening
    D. Gebhart, A. Krapf, C. Gammer, B. Merle, M. Cordill
    Scr. Mater.212, ARTN 114550 (2022)
  • Maximizing the degree of rejuvenation in metallic glasses
    X. Yuan, D. Sopu, F. Spieckermann, K.K. Song, S. Ketov, K.G. Prashanth, J. Eckert
    Scr. Mater.212, ARTN 114575 (2022)
  • Influence of grain aspect-ratio on the fracture properties of ultrafine-grained tantalum
    A. Hohenwarter, M. Rockenschaub, O. Renk
    Mater. Des.216, ARTN 110545 (2022)
  • Thermal stress analysis and structural optimization of ladle nozzle based on finite element simulation
    Z. Rong, J. Yi, F. Li, Y. Liu, J. Eckert
    MATERIALS RESEARCH EXPRESS9, ARTN 045601 (2022)
  • Characterization methods for strain-induced damage in polypropylene
    J. Wiener, F. Preissegger, B. Plank, F. Arbeiter, O. Kolednik, G. Pinter
    Polym. Eng. Sci.25, ARTN25979 (2022)
  • Quantitative Strain and Topography Mapping of 2D Materials Using Nanobeam Electron Diffraction
    J. Sickel, Ml Asbach, C. Gammer, R. Bratschitsch, H. Kohl
    Microsc. microanal.2022, 1-15 (2022)
  • Editorial: Fundamentals and Challenges of Advanced Amorphous and High-Entropy Alloys</p>
    K. Song, Y. Huang, R. Li, J. Qiao, Z. Wang, K.G. Prashanth, D. Sopu
    Front. Mater.9, ARTN 874556 (2022)
  • Role of laser remelting and heat treatment in mechanical and tribological properties of selective laser melted Ti6Al4V alloy
    J. Karimi, M. Antonov, L. Kollo, K.G. Prashanth
    J. Alloy. Compd.897, ARTN 163207 (2022)
  • On the existence of orthorhombic martensite in a near-alpha titanium base alloy used for additive manufacturing
    C. Fleissner-Rieger, M. Tunes, C. Gammer, T. Joerg, T. Pfeifer, M. Musi, F. Mendez-Martin, H. Clemens
    J. Alloy. Compd.897, ARTN 163155 (2022)
  • Manufacturing of Textured Bulk Fe-SmCo5 Magnets by Severe Plastic Deformation
    L. Weissitsch, M. Stueckler, S. Wurster, J. Todt, P. Knoll, H. Krenn, R. Pippan, A. Bachmaier
    NANOMATERIALS12, ARTN 963 (2022)
  • The effect of solute atoms on the bulk and grain boundary cohesion in Ni: Implications for hydrogen embrittlement
    S. He, W. Ecker, O.E. Peil, R. Pippan, V.I. Razumovskiy
    MATERIALIA21, ARTN 101293 (2022)
  • Fracture of severely plastically deformed titanium
    B. Volker, S. Wurster, R. Pippan, A. Hohenwarter
    Mater. Lett.309, ARTN 131382 (2022)
  • Mechanical and Tribological Behavior of Gravity and Squeeze Cast Novel Al-Si Alloy
    V. Chandra, K. Krishna, M. Ravi, K. Sivaprasad, S. Dhanasekaran, K. Prashanth
    METALS12, ARTN 194 (2022)
  • Cracking mechanism in a laser powder bed fused cold-work tool steel: The role of residual stresses, microstructure and local elemental concentrations
    J. Platl, S. Bodner, C. Hofer, A. Landefeld, H. Leitner, C. Turk, M.A. Nielsen, A.G. Demir, B. Previtali, J. Keckes, R. Schnitzer
    Acta Mater.225, ARTN 117570 (2022)
  • High virucidal potential of novel ceramic-metal composites fabricated via hybrid selective laser melting and spark plasma sintering routes
    R. Rahmani, K. Molan, M. Brojan, K. Prashanth, D. Stopar
    Int. J. Adv. Manuf. Technol.2022, ARTN 8878 (2022)
  • Effect of supporting electrolyte on capacitance and morphology of electrodeposited poly(3,4-propylenedioxythiophene) derivatives bearing reactive functional groups
    B. Sarac, T. Karazehir, H.-D. Gilsing, J. Eckert, A.S. Sarac
    Mol. Syst. Des. Eng.460, 460-479 (2022)
  • Influence of interlayers on the interfacial behavior of Ag films on polymer substrates
    M. Cordill, M. Paulitsch, C. Katsarelis, B. Putz, A. Lassnig, M. Kennedy
    Thin Solid Films742, ARTN 139051 (2022)
  • Selective Laser Melting of Commercially Pure Molybdenum by Laser Rescanning
    N. Alinejadian, P. Wang, L. Kollo, K.G. Prashanth
    3D Print. Addit. Manuf.123, 1-7 (2022)
  • Cementite decomposition in 100Cr6 bearing steel during high-pressure torsion: Influence of precipitate composition, size, morphology and matrix hardness
    S. Kiranbabu, P.-Y. Tung, L. Sreekala, T.S. Prithiv, T. Hickel, R. Pippan, L. Morsdorf, M. Herbig
    Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process.833, ARTN 142372 (2022)
  • Laser additive manufacturing of nano-TiC particles reinforced CoCrFeMnNi high-entropy alloy matrix composites with high strength and ductility
    H. Chen, T. Lu, Y. Wang, Y. Liu, T. Shi, K. Prashanth, K. Kosiba
    Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process.833, ARTN 142512 (2022)
  • Precipitation behavior of a Co-free Fe-Ni-Cr-Mo-Ti-Al maraging steel after severe plastic deformation
    S. Zeisl, A. Lassnig, A. Hohenwarter, F. Mendez-Martin
    Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process.833, ARTN 142416 (2022)
  • Microstructure-dependent phase stability and precipitation kinetics in equiatomic CrMnFeCoNi high-entropy alloy: Role of grain boundaries
    R. Daniel, J. Zalesak, I. Matko, W. Baumegger, A. Hohenwarter, E.P. George, J. Keckes
    Acta Mater.223, ARTN 117470 (2022)
  • Fabrication of Al/Mg Bimetallic Thin-Walled Ultrafine-Grained Tube by Severe Plastic Deformation
    S.M. Hosseini, M. Roostaei, M. Mosavi Mashhadi, H. Jabbari, G. Faraji
    J. Mater. Eng. Perform.021, ARTN 06514-5 (2022)
  • Evolution of Microstructure and Mechanical Properties of LM25-HEA Composite Processed through Stir Casting with a Bottom Pouring System
    M. Chinababu, N. Naga Krishna, K. Sivaprasad, K.G. Prashanth, E. Bhaskara Rao
    MATERIALS15, ARTN 230 (2022)
  • Electron Back Scatter Diffraction and Synchrotron X-Ray Peak Profile Analysis as Tools for Microstructural Characterization of Large Strain Work Hardened Metals
    T. Hebesberger, E. Schafler, M. Zehetbauer, R. Pippan, T. Ungar, S. Bernstorff
    Int. J. Mater. Res.92, 410-416 (2022)
  • Annealing metallic glasses above T-g in order to accelerate the relaxation process in molecular dynamics simulations
    D. Sopu, X. Yuan, J. Eckert
    Appl. Phys. Lett.120, ARTN 011904 (2022)

Master Thesis

Master Thesis

Other

Other