PhD Thesis
PhD Thesis
- High Pressure Torsion Deformation of Nanocarbon-reinforced Metal Matrix Composites
(2019)RIS ENW BIB - Implementation of femtosecond laser processing for materials testing and research
(2019)RIS ENW BIB - Thermodynamic Stability and Mechanical Properties of Nanocrystalline High-entropy Alloys
(2018)RIS ENW BIB - Simulation von Rissen in höchstfesten Stahlblechen mit einem Trefftz-Element für Mixed-Mode-Beanspruchungen
Fortschritt-Berichte VDI (2018)RIS ENW BIB - Fracture toughness and microstructural stability of heavily deformed tungsten materials
(2018)RIS ENW BIB - Processing - Structure - Property Relationships in Selected Iron-Based Nanostructures"
(2018)RIS ENW BIB - Bulk metallic glass composites fabricated via high pressure torsion
(2018)RIS ENW BIB - Atomic-scale characterization of severely deformed nanocrystalline alloys
(2018)RIS ENW BIB - Advanced Nanoindentation Techniques for the Extraction of Material Flow Curves
(2018)RIS ENW BIB - "Mechanical and Interfacial Integrity of Metal-Polymer Multilayer Systems"
(2017)RIS ENW BIB - Depth resolved stress gradient and dislocation analyses in III-N multilayer structures
(2017)RIS ENW BIB - "The Role of Interfaces in BCC Metal Plasticity Across Length-Scales and Temperatures"
(2017)RIS ENW BIB - "Structural and Mechanical Gradients in Nanostructured Thin Films"
(2017)RIS ENW BIB - "Damage Tolerant Design Concepts for the Application of High Strength Materials in Railways Switch Components"
(2017)RIS ENW BIB - Application of the Configurational Forces Concept for the Design of Tough, Strong and Damage-tolerant Composites
(2017)RIS ENW BIB - Structural Instabilities in Nanostructured Metals
(2017)RIS ENW BIB - Thermo-mechanical Behaviour of Thick Copper Metallizations for Power Electronics
(2017)RIS ENW BIB - Residual Stresses and Crack Growth in Microelectronic Thin Films
(2017)RIS ENW BIB - Fatigue crack growth of noncrystalline and ultrafine-grained metals processed by severe plastic deformation
(2017)RIS ENW BIB - Deformation-induced supersaturation of immiscible binary systems
(2016)RIS ENW BIB - Combcrack Generation in PVD Coated Hardmetal Milling Inserts
(2016)RIS ENW BIB - Nanoscale Investigations of Performance-critical Regions in Non-homogeneous Metallic and Ceramic Thin Films
(2016)RIS ENW BIB - Bruchverhalten von Fe - Si - Al Stählen
(2016)RIS ENW BIB - Rissfortschritt in duktilen Stählen unter zyklischer Belastung: Einfluss des Herstellungsverfahrens und der Lastgeschichte
(2015)RIS ENW BIB - Recovery phenomena in severely deformed metals
(2015)RIS ENW BIB - Characterization of crack growth with the configurational force concept
(2015)RIS ENW BIB - Combined atomic force and electron microscopy instrumentation to study microscale plasticity
(2015)RIS ENW BIB - TEM Investigations on Interactions of Dislocations with Boundaries
(2015)RIS ENW BIB - Untersuchung der Grenzflächeneigenschaften von Barrieremetallen auf dielektrischen Schichten
(2014)RIS ENW BIB - Advanced Diffraction Techniques for Microstructure and Stress Characterisation at Multiple Scales
(2014)RIS ENW BIB - Bestimmung von Struktur-Eigenschafts-Beziehungen in nanostrukturierten dünnen Schichten mit Hilfe lokaler Charakterisierungsmethoden
(2014)RIS ENW BIB - Plasticity and fatigue of miniaturized Cu structures
(2014)RIS ENW BIB - Schadenstoleranz und Festigkeitssteigerung von Antriebskomponenten
(2014)RIS ENW BIB - Die Versagensmechanismen pressgehärteter Stähle im Dreipunkt-Biegeversuch
Diplomarbeit, Montanuniversität Leoben, November 2006, None (2014)Webseite RIS ENW BIB - Einfluss von Materialeigenschaften auf das Betriebsverhalten von Eisenbahnschienen
Diplomarbeit, Montanuniversität Leoben, November 2006, None (2014)Webseite RIS ENW BIB - Strain Localization under Fatigue Loading
(2013)RIS ENW BIB - Gefüge und Eigenschaften der intermetallischen TNM-Legierung
, 321 (2013)RIS ENW BIB - Bruch und Ermüdung von inhomogenen Materialien
, 167 (2013)RIS ENW BIB - Inhomogene strukturelle und mechanische Eigenschaften von nanokristallinen Dünnschichten charakterisiert mittels fortgeschrittener Röntgenbeugungsverfahren
(2012)RIS ENW BIB - Mechanical behaviour of ultrafine-grained nickel: The role of purity and strain path
(2012)RIS ENW BIB - Der Einfluss von verschiedenen Schienengüten und unterschiedlichen Kontaktbedingungen auf Verschleiß und Rollkontaktermüdung von Schienen
(2011)RIS ENW BIB - Verformung und Bruch von modernen, hochfesten Multiphasenstählen
(2011)RIS ENW BIB - Mikrostrukturoptimierung und Struktur-Eigenschaftsbeziehungen von thermoplastischen Nanokompositen
(2011)RIS ENW BIB - Ursachen und Auswirkungen von Delaminationsrissen in thermomechanisch gewalzten Stählen
(2011)RIS ENW BIB - Uniaxiale Zuversuche von spröden Schichten auf duktile Substraten
(2011)RIS ENW BIB - Temperaturabhängige mechanische Eigenschaften miniaturisierter Kupferstrukturen aus der Leistungshalbleiterelektronik
(2011)RIS ENW BIB - Herstellung von massiven Nanoverbundwerkstoffen mittels Hochverformung
(2011)RIS ENW BIB - Fracture Behavior of Tungsten Based Materials
(2011)RIS ENW BIB - The Microstructural Break Down: The Effect of Initial Grain Size
Diplomarbeit, Montanuniversität Leoben, November 2006, None (2011)RIS ENW BIB - Influence of Microstructure on Material Behaviour of WC-Co Hard Metals under Static and Cyclic Loading Conditions
, 111 (2011)RIS ENW BIB - Plasticity at the Micron Scale: A µLaue Study
, 140 (2011)RIS ENW BIB
Conference Papers
Conference Papers
- Biomimetic Design Concepts for the Pipe Architecture of Tomorrow
, 1-8 (2018)RIS ENW BIB - Influence of Secondary Phase on Intrinsic Threshold and Path of Shear-Mode Fatigue Cracks in Metals
Acta Phys. Pol. A, 134, 699-702 (2018)DOI RIS ENW BIB - Design and development of MEMS-based structures for in-situ characterization of thermo-mechanical behaviour of thin metal films
Microelectron. Reliab., 88-90, 829-834 (2018)DOI RIS ENW BIB - High electrocatalytic performance of a graphene-supported PtAu nanoalloy for methanol oxidation
Int. J. Hydrog. Energy, 43, 12803-12810 (2018)DOI RIS ENW BIB - Sub 25 nm focusing with a long working distance using multilayer Laue lenses
J. Instrum., 13, ARTN C04011 (2018)DOI RIS ENW BIB - Nanodiffraction Strain Mapping of Metallic Glasses During In Situ Deformation
Proceedings of the First International Conference on Theoretical, Applied and Experimental Mechanics (2018)DOI RIS ENW BIB - Structure Modulation and Nanocrystallization of Metallic Glasses: How to Tune Mechanical Properties
, 352-353 (2018)DOI RIS ENW BIB - Fatique Crack-Growth Properties of SPD-Metals
Proceedings of the First International Conference on Theoretical, Applied and Experimental Mechanics, 347-349 (2018)DOI RIS ENW BIB - Synthesis and Properties of Bulk Metallic Glass Composites
Proceedings of the First International Conference on Theoretical, Applied and Experimental Mechanics, 333-335 (2018)DOI RIS ENW BIB - Plasticity Enhancement of Composite and Nanoscaled Metallic Glasses
Forschungszentrum Jülich GmbH, ed. NIC Symposium 2018, 281-288 (2018)RIS ENW BIB - Laser Ultrasonic Thin Film Characterization of Si-Cu-Al-Cu Multi-Layered Stacks
Materials Today: Proceedings, 4, 7122-7127 (2017)DOI RIS ENW BIB - Evolution of the microstructure in carbon nanotube reinforced Nickel matrix composites processed by high-pressure torsion
, ARTN 012008 (2017)DOI RIS ENW BIB - Finite element modeling of the residual stress evolution in forged and direct-aged alloy 718 turbine disks during manufacturing and its experimental validation
, ARTN 070001 (2017)DOI RIS ENW BIB - Pt nanoparticles modified Au dendritic nanostructures: Facile synthesis and enhanced electrocatalytic performance for methanol oxidation
Int. J. Hydrog. Energy, 42, 22100-22107 (2017)DOI RIS ENW BIB - Micro-Mechanical In Situ Measurements in Thin Film Systems Regarding the Determination of Residual Stress, Fracture Properties and Interface Toughness
, 750-751 (2017)DOI RIS ENW BIB - Strength and ductility of heavily deformed pearlitic microstructures
, ARTN 012003 (2017)DOI RIS ENW BIB - From an understanding of structural restoration mechanisms towards a selective processing of extreme nanolamellar structures
(2017)DOI RIS ENW BIB - Role of interfaces on microstructure refinement and mechanical properties of severe plastically deformed copper and copper-silver eutectic
, ARTN 012021 (2017)DOI RIS ENW BIB - Crack closure and retardation effects – experiments and modelling
Procedia Structural Integrity, 4, 19-26 (2017)DOI RIS ENW BIB - Experimental evidence of a common local mode II growth mechanism of fatigue cracks loaded in modes II, III and II plus III in niobium and titanium
Int. J. Fatigue, 92, 470-477 (2016)DOI RIS ENW BIB - Investigation of Ni-B Alloys for Joining of TiB2 Ultra-High-Temperature Ceramic
J. Mater. Eng. Perform., 25, 3204-3210 (2016)DOI RIS ENW BIB - Tailoring the mechanical and magnetic properties of nanocrystalline materials by decomposition of metastable solid solutions
(2016)RIS ENW BIB - Auger and X-ray photoelectron spectroscopy on lithiated HOPG
Surf. Interface Anal., 48, 501-504 (2016)DOI RIS ENW BIB - Determination of crack initiation and crack growth stress-life curves by fracture mechanics experiments and statistical analysis
, 3026-3039 (2016)DOI RIS ENW BIB - Fracture and Material Behavior of Thin Film Composites
(2016)RIS ENW BIB - Recent advances in research in severe plastic deformation in Leoben
(2016)RIS ENW BIB - Fabrication of Cu-Al-Ni-Mn Shape-Memory Parts by Selective Laser Melting
(2016)RIS ENW BIB - Design of fracture resistant composites by utilizing spatial material property variations
(2015)RIS ENW BIB - Physically correct assessment of fatigue crack growth in elastic–plastic materials with the J-integral
(2015)RIS ENW BIB - Hardening by annealing: insights from different alloys
IOP PUBLISHING LTD, ed. (2015)DOI RIS ENW BIB - Phase decomposition and nano structure evolution of metastable nanocrystalline Cu-Co solid solutions during thermal treatment
IOP PUBLISHING LTD, ed. (2015)DOI RIS ENW BIB - In-situ tensile straining of metal films on polymer substrates under an AFM
(2013)RIS ENW BIB - Effect of delaminations in Charpy specimens on impact energy in thermomechanically rolled hot strip steel
, 1-8 (2013)RIS ENW BIB - Adhesion of Printed Circuit Boards with bending and the effect of reflow cycles
IEEE Catalog Number CFP13566-CDR, ed. ISBN 978-1-4673-6137-8, 1-8 (2013)RIS ENW BIB - Mechanical testing of micron and sub-micron samples using in-situ electron microscopy
, 239-244 (2013)RIS ENW BIB - Miniaturized Cantilever Bending Experiments for Determination of Fracture Properties of Tungsten as a Model Material
, 271-275 (2013)RIS ENW BIB - Verformungsinduzierte Phasenumwandlung einzelner Austenitkörper
B Lehrstuhl für Umformtechnik Bruno, ed. XXXII. Verformungskundliches Kolloquium, 143-149 (2013)RIS ENW BIB - Nanodiffraction at MINAXS (P03) beamline of PETRA III
, 072021-4 (2013)DOI RIS ENW BIB - Strong and stable nanostructured Ni by light alloying
HN Faester W. Huang X., ed. Nanometals - Status and Perspective, 399-406 (2012)RIS ENW BIB - Nanocomposites and supersaturated solid solutions generated by SPD: the effect of initial strucutre and strain path
HN Faester W. Huang X., ed. Nanometals - Status and Perspective, 107-113 (2012)RIS ENW BIB - Fatigue and cracking behaviour of austenitic CrNiMo and CrMnN steels in chloride containing environment at elevated temperature
European Structural Integrity Scociety (ESIS), ed., 1-11 (2012)Download RIS ENW BIB - Simulation of crack propagation using hybrid Trefftz method based on a strip-yield crack-tip plasticity model for automotive crash applications
European Structural Integrity Scociety (ESIS), ed., 1-8 (2012)Download RIS ENW BIB - Improvement of fatigue performance by residual stresses: a fracture mechanics approach
European Structural Integrity Scociety (ESIS), ed., 1-8 (2012)Download RIS ENW BIB - Near-threshold Fatigue Crack Propagation under Mixed-mode II+III in ARMCO Iron
European Structural Integrity Scociety (ESIS), ed., 1-6 (2012)Download RIS ENW BIB - A new SEM in-situ fatigue testing apparatus and its application for evaluation damage at higher load cycles
European Structural Integrity Scociety (ESIS), ed., 1-8 (2012)Download RIS ENW BIB - Detection of broadband laser induced longitudinal ultrasonic pulses in ultrafine grain nickel by pancake coil
1433 AIP Conference Proceedings, ed., 733-736 (2012)RIS ENW BIB - Growth kinetic of Al2Cu precipitates during in-situ TEM heating in severe plastically deformed Al-3wt%Cu alloy
MCM2011, 623-624 (2011)RIS ENW BIB - Obtaining a quantitative micro- and nano-mechanical understanding of metals using in situ electron microscopy
MCM2011, 599-600 (2011)RIS ENW BIB - Plasticity of FIB fabricated micro-samples investigated by in-situ micro-Laue diffraction and in-situ TEM
MCM2011, 129-130 (2011)RIS ENW BIB - Advances in in-situ testing in scanning electron microscopes: probing mechanical properties at the nano/micro-scale
MCM2011, 57-58 (2011)RIS ENW BIB - Comparative studies of the CrN/Cr/Si and CrN/Si interfaces by Cs-corrected HRTEM and STEM-EELS
MCM2011, 29-30 (2011)RIS ENW BIB - Fatigue Crack Closure from LCF to small skill yielding
YJR James M.N. Susmel L., ed., 208-215 (2011) - Physical metallurgy and properties of ß-solidifying TiAl based alloys
Materials Research Society, ed., 95-100 (2011)RIS ENW BIB
Journal Articles
Journal Articles
- Enhancement of hydrogen storage properties from amorphous Mg85Ni5Y10 alloy
J NON-CRYST SOLIDS, 605, ARTN 122167 (2023)DOI RIS ENW BIB - Additive manufacturing of CMCs with bimodal microstructure
J ALLOY COMPD, 938, ARTN 168416 (2023)DOI RIS ENW BIB - Strong and ductile titanium via additive manufacturing under a reactive atmosphere
MATER TODAY ADV, 17, ARTN 100347 (2023)DOI RIS ENW BIB - Hierarchical microstructures and strengthening mechanisms of nano-TiC reinforced CoCrFeMnNi high-entropy alloy composites prepared by laser powder bed fusion
J MATER SCI TECHNOL, 136, 245-259 (2023)DOI RIS ENW BIB - A novel crack-free and refined 2195-Ti/CeB6 composites prepared by laser powder bed fusion
MATER LETT, 333, ARTN 133572 (2023)DOI RIS ENW BIB - Can Severe Plastic Deformation Tune Nanocrystallization in Fe-Based Metallic Glasses?
MATERIALS, 16, ARTN 1260 (2023)DOI RIS ENW BIB - Pd-based Metallic Glasses as Promising Materials for Hydrogen Energy Applications
J ELECTROCHEM SOC, 170, ARTN 014503 (2023)DOI RIS ENW BIB - Exchange Bias Demonstrated in Bulk Nanocomposites Processed by High-Pressure Torsion
NANOMATERIALS, 13, ARTN 344 (2023)DOI RIS ENW BIB - Surface Chemistry and Degradation Processes of Dense La0.6Sr0.4CoO3-delta Thin Film Electrodes
J ELECTROCHEM SOC, 170, ARTN 014501 (2023)DOI RIS ENW BIB - Circumventing Solidification Cracking Susceptibility in Al-Cu Alloys Prepared by Laser Powder Bed Fusion
3D PRINT ADDIT MANUF (2022)DOI RIS ENW BIB - Phase Transformation Induced by High Pressure Torsion in the High-Entropy Alloy CrMnFeCoNi
MATERIALS, 15, ARTN 8407 (2022)DOI RIS ENW BIB - Decomposition-resistant carbonitride precipitates in X30CrMoN15-1 high-nitrogen bearing steel deformed by high-pressure torsion
Materials Science & Engineering A, 144529 (2022)DOI RIS ENW BIB - Surface Topography and Biocompatibility of cp-Ti Grade2 Fabricated by Laser-Based Powder Bed Fusion: Influence of Printing Orientation and Surface Treatments
ADV ENG MATER, 2022, 2201073 (2022)DOI RIS ENW BIB - Probing the stability, adhesion strength, and fracture mechanism of Mg/ Al2Y interfaces via first-principles calculations
MATERIALS TODAY COMMUNICATIONS, 33, ARTN 104612 (2022)DOI RIS ENW BIB - Selective laser melting of in-situ CoCrFeMnNi high entropy alloy: Effect of remelting
J. Manuf. Process., 84, 55-63 (2022)DOI RIS ENW BIB - Reactive interdiffusion of an Al film and a CoCrFeNi high-entropy alloy at elevated temperatures
Intermetallics, 1-11 (2022)DOI RIS ENW BIB - Enhanced mechanical performance of gradient-structured CoCrFeMnNi high-entropy alloys induced by industrial shot-blasting
RARE METALS, 1-10 (2022)DOI RIS ENW BIB - Iron oxide - poly(m-anthranilic acid)-poly(e-caprolactone) electrospun composite nanofibers: fabrication and properties
MOL SYST DES ENG (2022)DOI RIS ENW BIB - In situ electrochemical observation of anisotropic lattice contraction of La0.6Sr0.4FeO3-delta electrodes during pulsed laser deposition
PHYS CHEM CHEM PHYS, 25, 142-153 (2022)DOI RIS ENW BIB - Electromechanical Behavior of Al/Al2O3 Multilayers on Flexible Substrates: Insights from In Situ Film Stress and Resistance Measurements
ADV ENG MATER, 1-15 (2022)DOI RIS ENW BIB - Optimal tensile properties of laser powder bed fusion hereditary basket-weave microstructure in additive manufactured Ti6Al4V
Addit. Manuf., 59, ARTN 103092 (2022)DOI RIS ENW BIB - Local microstructural evolution and the role of residual stresses in the phase stability of a laser powder bed fused cold-work tool steel
Mater. Charact., 193, ARTN 112318 (2022)DOI RIS ENW BIB - New-generation biocompatible Ti-based metallic glass ribbons for flexible implants
Mater. Des., 223, ARTN 111139 (2022)DOI RIS ENW BIB - Improvement of hardness in Ti-stabilized austenitic stainless steel
MATER DESIGN, 223, ARTN 111242 (2022)DOI RIS ENW BIB - Microstructure and Tribological Behavior of Fe-Based Amorphous Alloy Fabricated by Plasma Spraying and Laser Remelting
T INDIAN I METALS, 2022, 1-8 (2022)DOI RIS ENW BIB - Fiber Laser Welded Cobalt Super Alloy L605: Optimization of Weldability Characteristics
MATERIALS, 15, ARTN 7708 (2022)DOI RIS ENW BIB - Mechanical Properties and Microstructural Evolution of Ti-25Nb-6Zr Alloy Fabricated by Spark Plasma Sintering at Different Temperatures
METALS, 12, ARTN 1824 (2022)DOI RIS ENW BIB - Direct Formation of Hard-Magnetic Tetrataenite in Bulk Alloy Castings
ADVANCED SCIENCE, 2204315, 1-8 (2022)DOI RIS ENW BIB - Importance of the micro-lattice structure of selective laser melting processed Mo/Mo(x)S(x+1) composite: Corrosion studies on the electrochemical performance in aqueous solutions
MATER TODAY CHEM, 26, ARTN 101219 (2022)DOI RIS ENW BIB - Microstructure and Nanoindentation Creep Behavior of Binary Al-Cu Alloy Synthesized at High Pressure
JOM, 12345, 1-8 (2022)DOI RIS ENW BIB - Effect of a single overload on the cyclic R-curve behaviour of a gamma-TiAl TNM alloy
Int. J. Fatigue, 163, ARTN 107083 (2022)DOI RIS ENW BIB - Effect of powder bed preheating on the crack formation and microstructure in ceramic matrix composites fabricated by laser powder-bed fusion process
Addit. Manuf., 58, ARTN 103013 (2022)DOI RIS ENW BIB - MEMS-Based in situ electron-microscopy investigation of rapid solidification and heat treatment on eutectic Al-Cu
Acta Mater., 239, ARTN 118225 (2022)DOI RIS ENW BIB - Designing lightweight multicomponent magnesium alloys with exceptional strength and high stiffness
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 855, ARTN 143901 (2022)DOI RIS ENW BIB - Enhancement in strength and thermal stability of selective laser melted Al-12Si by introducing titanium nanoparticles
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 855, ARTN 143833 (2022)DOI RIS ENW BIB - Fatigue of copper films subjected to high-strain rate thermo-mechanical pulsing
Microelectron. Reliab., 137, ARTN 114782 (2022)DOI RIS ENW BIB - Crack Formation and Control in an AlCoCrFeNi High Entropy Alloy Fabricated by Selective Laser Melting
3D PRINT ADDIT MANUF, 2022, 1-12 (2022)DOI RIS ENW BIB - Electroless Ni-P-MoS2-Al2O3 Composite Coating with Hard and Self-Lubricating Properties
MATERIALS, 15, ARTN 6806 (2022)DOI RIS ENW BIB - Crack propagation resistance of TiAl alloys
MRS Bull., 47, 1-8 (2022)DOI RIS ENW BIB - Ti6Al4V Coating on 316L Substrate by Laser-based Fusion Process
Trans. Indian Inst. Met., 124, 1-10 (2022)DOI RIS ENW BIB - Influence of the 1% Ti content on microstructure, friction coefficient and contribution to the strengthening mechanisms in the Al20Sn1Cu alloy
RESULTS IN ENGINEERING, 15, ARTN 100506 (2022)DOI RIS ENW BIB - Precipitation-based grain boundary design alters Inter- to Trans-granular Fracture in AlCrN Thin Films
Acta Mater., 237, ARTN 118156 (2022)DOI RIS ENW BIB - Interface-related deformation phenomena in metallic glass/high entropy nanolaminates
Acta Mater., 237, ARTN 118191 (2022)DOI RIS ENW BIB - Influence of Processing Route on the Fracture Resistance of Equal Channel Angular Pressing Deformed Iron
Adv. Eng. Mater., 2201011, ARTN 2201011 (2022)DOI RIS ENW BIB - A measurement structure for in-situ electrical monitoring of cyclic delamination
Surf. Coat. Technol., 445, ARTN 128715 (2022)DOI RIS ENW BIB - High-Entropy Alloy-Induced Metallic Glass Transformation: Challenges Posed by in situ Alloying via Additive Manufacturing
Adv. Eng. Mater., 220764, ARTN 2200764 (2022)DOI RIS ENW BIB - Effect of Wear Debris Entrapment on the Tribological Performance of AlCoCrFeNi Produced by Selective Laser Melting or Spark Plasma Sintering
Metall. Mater. Trans. A-Phys. Metall. Mater. Sci., 12345, 1-7 (2022)DOI RIS ENW BIB - Prior beta grain evolution and phase transformation of selective laser melted Ti6Al4V alloy during heat treatment
J. Alloy. Compd., 914, ARTN 165235 (2022)DOI RIS ENW BIB - Carbon nanotube-polybutadiene-poly(ethylene oxide)-based composite fibers: Role of cryogenic treatment on intrinsic properties
Polym. Adv. Technol., 5828, 1-11 (2022)DOI RIS ENW BIB - Conditions near a crack tip: Advanced experiments for dislocation analysis and local strain measurement
MRS Bull., 47, 1-8 (2022)DOI RIS ENW BIB - Mechanical Property Evaluation of CuNb Composites Manufactured with High-Pressure Torsion
JOM, 123, 1-10 (2022)DOI RIS ENW BIB - Magnetron Sputtered Non-Toxic and Precious Element-Free Ti-Zr-Ge Metallic Glass Nanofilms with Enhanced Biocorrosion Resistance
Adv. Mater. Interfaces, 123, ARTN 2201223 (2022)DOI RIS ENW BIB - Achieving 1 GPa fatigue strength in nanocrystalline 316L steel through recovery annealing
Scr. Mater., 217, ARTN 114773 (2022)DOI RIS ENW BIB - On the transition of failure control from material-intrinsic defects to defects forming during monotonically increasing and cyclic mechanical loading in WC-Co hard metal at elevated temperature
Acta Mater., 235, ARTN 118087 (2022)DOI RIS ENW BIB - Hybrid metal-ceramic biomaterials fabricated through powder bed fusion and powder metallurgy for improved impact resistance of craniofacial implants
MATERIALIA, 24, ARTN 101465 (2022)DOI RIS ENW BIB - Influence of Hatch Strategy on Crystallographic Texture Evolution, Mechanical Anisotropy of Laser Beam Powder Bed Fused S316L Steel
Adv. Eng. Mater., 1234, ARTN 2200524 (2022)DOI RIS ENW BIB - TMS LDI: ACCELERATING DIVERSE LEADERSHIP ACROSS EVERY LEVEL OF THE SOCIETY
JOM (2022)DOI RIS ENW BIB - Antibacterial activity, cytocompatibility, and thermomechanical stability of Ti40Zr10Cu36Pd14 bulk metallic glass
MATERIALS TODAY BIO, 16, ARTN 100378 (2022)DOI RIS ENW BIB - Microstructure, Mechanical Properties, and Corrosion Behavior of 06Cr15Ni4CuMo Processed by Using Selective Laser Melting
METALS, 12, ARTN 1303 (2022)DOI RIS ENW BIB - Atomic-scale understanding of the structural evolution of TiN/AlN superlattice during nanoindentation - Part 1: Deformation
Acta Mater., 234, ARTN 118008 (2022)DOI RIS ENW BIB - Atomic-scale understanding of the structural evolution in TiN/AlN superlattice during nanoindentation-Part 2: Strengthening
Acta Mater., 234, ARTN 118009 (2022)DOI RIS ENW BIB - Selective Laser Melting of TiC-Based Cermet: HIP Studies
Trans. Indian Inst. Met., 98-105 (2022)DOI RIS ENW BIB - Wire Arc Additive Manufacturing of NiTi 4D Structures: Influence of Interlayer Delay
3D Print. Addit. Manuf., 123, 1-8 (2022)DOI RIS ENW BIB - Effect of TiB2 addition on the mechanical and biological response of spark plasma sintered Ti6Al7Nb matrix composites
J. Alloy. Compd., 924, ARTN 166502 (2022)DOI RIS ENW BIB - A novel crack-free Ti-modified Mo alloy designed for laser powder bed fusion
J. Alloy. Compd., 910, ARTN 164802 (2022)DOI RIS ENW BIB - Tribological investigations of Mo films deposited on thin polyimide substrates
Surf. Coat. Technol., 442, ARTN 128549 (2022)DOI RIS ENW BIB - Effect of preheating and cooling of the powder bed by laser pulse shaping on the microstructure of the TiC based cermets
Ceram. Int., 48, 20612-20618 (2022)DOI RIS ENW BIB - Fabrication of stainless-steel microfibers with amorphous-nanosized microstructure with enhanced mechanical properties
Sci Rep, 12, ARTN 10784 (2022)DOI RIS ENW BIB - Mitigating the detrimental effects of galvanic corrosion by nanoscale composite architecture design
NPJ MATERIALS DEGRADATION, 6, ARTN 47 (2022)DOI RIS ENW BIB - Mapping Shear Bands in Metallic Glasses: From Atomic Structure to Bulk Dynamics
Phys. Rev. Lett., 128, ARTN 245501 (2022)DOI RIS ENW BIB - Film thickness and architecture effects in biaxially strained polymer supported Al/Mo bilayers
MATERIALS TODAY COMMUNICATIONS, 31, ARTN 103455 (2022)DOI RIS ENW BIB - Synthesis and structure of refractory high entropy alloy thin films based on the MoNbTaW system
Surf. Coat. Technol., 439, ARTN 128446 (2022)DOI RIS ENW BIB - Thermoplasticity of metallic glasses: Processing and applications
Prog. Mater. Sci., 127, ARTN 100941 (2022)DOI RIS ENW BIB - Technical Note: Hardness, Corrosion Behavior, and Microstructural Characteristics of a Selective Laser Melted 17-4 PH Steel
Corrosion, 78, 465-472 (2022)DOI RIS ENW BIB - Additive Manufacturing of CoCrFeMnNi High-Entropy Alloy/AISI 316L Stainless Steel Bimetallic Structures
Adv. Eng. Mater., 1234, ARTN 2200341 (2022)DOI RIS ENW BIB - Configurational force based analysis of creep crack growth
Int. J. Fract., 2022, 1-25 (2022)DOI RIS ENW BIB - High-Throughput Micromechanical Testing Enabled by Optimized Direct Laser Writing
Adv. Eng. Mater., 2022, ARTN 2200288 (2022)DOI RIS ENW BIB - Redeposition layer formation caused by shading effect during sputter cleaning and associated damage on rake face of TiN coated high-speed steel drills
Surf. Coat. Technol., 438, ARTN 128412 (2022)DOI RIS ENW BIB - Mechanical Properties, Microstructure, and Actuation Behavior of Wire Arc Additive Manufactured Nitinol: Titanium Bimetallic Structures
3D Print. Addit. Manuf., 9, 98-105 (2022)DOI RIS ENW BIB - Effect of Powder Characteristic and Aging Treatment on the Corrosion Behavior of Selective Laser Melted Al-20Si Alloy
Trans. Indian Inst. Met. (2022)DOI RIS ENW BIB - Interaction of crack and hole: effects on crack trajectory, crack driving force and fracture toughness
Int. J. Fract., 88, 1-26 (2022)DOI RIS ENW BIB - Ti6Al7Nb-TiB nanocomposites for ortho-implant applications
J. Mater. Res., 1234, 98-105 (2022)DOI RIS ENW BIB - A novel approach for determining the stress intensity factor for cracks in multilayered cantilevers
Eng. Fract. Mech., 266, ARTN 108386 (2022)DOI RIS ENW BIB - Atomistic mechanisms underlying plasticity and crack growth in ceramics: a case study of AlN/TiN superlattices
Acta Mater., 229, ARTN 117809 (2022)DOI RIS ENW BIB - Deformation-induced medium-range order changes in bulk metallic glasses
Phys. Rev. Mater., 6, ARTN 043603 (2022)DOI RIS ENW BIB - Subtle change in the work hardening behavior of fcc materials processed by selective laser melting
PROGRESS IN ADDITIVE MANUFACTURING, 7, 453-461 (2022)DOI RIS ENW BIB - Effect of the Laser Processing Parameters on the Selective Laser Melting of TiC-Fe-Based Cermets
JOURNAL OF MANUFACTURING AND MATERIALS PROCESSING, 6, ARTN 35 (2022)DOI RIS ENW BIB - Linking through-thickness cracks in metallic thin films to in-situ electrical resistance peak broadening
Scr. Mater., 212, ARTN 114550 (2022)DOI RIS ENW BIB - Maximizing the degree of rejuvenation in metallic glasses
Scr. Mater., 212, ARTN 114575 (2022)DOI RIS ENW BIB - Influence of grain aspect-ratio on the fracture properties of ultrafine-grained tantalum
Mater. Des., 216, ARTN 110545 (2022)DOI RIS ENW BIB - Thermal stress analysis and structural optimization of ladle nozzle based on finite element simulation
MATERIALS RESEARCH EXPRESS, 9, ARTN 045601 (2022)DOI RIS ENW BIB - Characterization methods for strain-induced damage in polypropylene
Polym. Eng. Sci., 25, ARTN25979 (2022)DOI RIS ENW BIB - Quantitative Strain and Topography Mapping of 2D Materials Using Nanobeam Electron Diffraction
Microsc. microanal., 2022, 1-15 (2022)DOI RIS ENW BIB - Editorial: Fundamentals and Challenges of Advanced Amorphous and High-Entropy Alloys</p>
Front. Mater., 9, ARTN 874556 (2022)DOI RIS ENW BIB - Role of laser remelting and heat treatment in mechanical and tribological properties of selective laser melted Ti6Al4V alloy
J. Alloy. Compd., 897, ARTN 163207 (2022)DOI RIS ENW BIB - On the existence of orthorhombic martensite in a near-alpha titanium base alloy used for additive manufacturing
J. Alloy. Compd., 897, ARTN 163155 (2022)DOI RIS ENW BIB - Manufacturing of Textured Bulk Fe-SmCo5 Magnets by Severe Plastic Deformation
NANOMATERIALS, 12, ARTN 963 (2022)DOI RIS ENW BIB - The effect of solute atoms on the bulk and grain boundary cohesion in Ni: Implications for hydrogen embrittlement
MATERIALIA, 21, ARTN 101293 (2022)DOI RIS ENW BIB - Fracture of severely plastically deformed titanium
Mater. Lett., 309, ARTN 131382 (2022)DOI RIS ENW BIB - Mechanical and Tribological Behavior of Gravity and Squeeze Cast Novel Al-Si Alloy
METALS, 12, ARTN 194 (2022)DOI RIS ENW BIB - Cracking mechanism in a laser powder bed fused cold-work tool steel: The role of residual stresses, microstructure and local elemental concentrations
Acta Mater., 225, ARTN 117570 (2022)DOI RIS ENW BIB - High virucidal potential of novel ceramic-metal composites fabricated via hybrid selective laser melting and spark plasma sintering routes
Int. J. Adv. Manuf. Technol., 2022, ARTN 8878 (2022)DOI RIS ENW BIB - Effect of supporting electrolyte on capacitance and morphology of electrodeposited poly(3,4-propylenedioxythiophene) derivatives bearing reactive functional groups
Mol. Syst. Des. Eng., 460, 460-479 (2022)DOI RIS ENW BIB - Influence of interlayers on the interfacial behavior of Ag films on polymer substrates
Thin Solid Films, 742, ARTN 139051 (2022)DOI RIS ENW BIB - Selective Laser Melting of Commercially Pure Molybdenum by Laser Rescanning
3D Print. Addit. Manuf., 123, 1-7 (2022)DOI RIS ENW BIB - Cementite decomposition in 100Cr6 bearing steel during high-pressure torsion: Influence of precipitate composition, size, morphology and matrix hardness
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 833, ARTN 142372 (2022)DOI RIS ENW BIB - Laser additive manufacturing of nano-TiC particles reinforced CoCrFeMnNi high-entropy alloy matrix composites with high strength and ductility
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 833, ARTN 142512 (2022)DOI RIS ENW BIB - Precipitation behavior of a Co-free Fe-Ni-Cr-Mo-Ti-Al maraging steel after severe plastic deformation
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 833, ARTN 142416 (2022)DOI RIS ENW BIB - Microstructure-dependent phase stability and precipitation kinetics in equiatomic CrMnFeCoNi high-entropy alloy: Role of grain boundaries
Acta Mater., 223, ARTN 117470 (2022)DOI RIS ENW BIB - Fabrication of Al/Mg Bimetallic Thin-Walled Ultrafine-Grained Tube by Severe Plastic Deformation
J. Mater. Eng. Perform., 021, ARTN 06514-5 (2022)DOI RIS ENW BIB - Evolution of Microstructure and Mechanical Properties of LM25-HEA Composite Processed through Stir Casting with a Bottom Pouring System
MATERIALS, 15, ARTN 230 (2022)DOI RIS ENW BIB - Electron Back Scatter Diffraction and Synchrotron X-Ray Peak Profile Analysis as Tools for Microstructural Characterization of Large Strain Work Hardened Metals
Int. J. Mater. Res., 92, 410-416 (2022)DOI RIS ENW BIB - Annealing metallic glasses above T-g in order to accelerate the relaxation process in molecular dynamics simulations
Appl. Phys. Lett., 120, ARTN 011904 (2022)DOI RIS ENW BIB - Selective Laser Melting of TiC-Fe via Laser Pulse Shaping: Microstructure and Mechanical Properties
3D Print. Addit. Manuf., 4, 57-63 (2021)DOI RIS ENW BIB - Iron-rich talc as air-stable platform for magnetic two-dimensional materials
NPJ 2D MATERIALS AND APPLICATIONS, 5, ARTN 94 (2021)DOI RIS ENW BIB - Mechanism of cementite decomposition in 100Cr6 bearing steels during high pressure torsion
Acta Mater., 201, 79-93 (2021)DOI RIS ENW BIB - Grain boundary segregation in Ni-base alloys: A combined atom probe tomography and first principles study
Acta Mater., 221, ARTN 117354 (2021)DOI RIS ENW BIB - Effect of cold rolling on the pressure coefficient of glass transition temperature in bulk metallic glasses
Thermochim. Acta, 706, ARTN 179071 (2021)DOI RIS ENW BIB - Investigating the Structure, Microstructure, and Texture in Selective Laser-Melted Sterling Silver 925
Metall. Mater. Trans. A-Phys. Metall. Mater. Sci., 52, 5329-5341 (2021)DOI RIS ENW BIB - Rapid solidification and metastable phase formation during surface modifications of composite Al-Cr cathodes exposed to cathodic arc plasma
J. Mater. Sci. Technol., 94, 147-163 (2021)DOI RIS ENW BIB - Strain-hardening properties of the high-entropy alloy MoNbTaTiVZr processed by high-pressure torsion
Continuum Mech. Thermodyn., 21, ARTN 01065-5 (2021)DOI RIS ENW BIB - Porosity and thickness effect of Pd-Cu-Si metallic glasses on electrocatalytic hydrogen production and storage
Mater. Des., 210, ARTN 110099 (2021)DOI RIS ENW BIB - Microstructure and mechanical properties of NiTi-SS bimetallic structures built using Wire Arc Additive Manufacturing
Mater. Lett., 303, ARTN 130499 (2021)DOI RIS ENW BIB - In Vitro Corrosion Behavior of Selective Laser Melted Ti-35Nb-7Zr-5Ta
J. Mater. Eng. Perform., 30, 7967-7978 (2021)DOI RIS ENW BIB - Synergistic Effect of Ni and Co Alloying on Corrosion Behavior of Fe(Ni,Co)P13C7 Metallic Glasses in 1M NaCl Solution
Int. J. Electrochem. Sci., 16, ARTN 211256 (2021)DOI RIS ENW BIB - Direct observation of nanocrystal-induced enhancement of tensile ductility in a metallic glass composite
Mater. Des., 209, ARTN 109970 (2021)DOI RIS ENW BIB - Dissimilar welding of high-entropy alloy to Inconel 718 superalloy for structural applications
J. Mater. Res., 2021, ARTN 352 (2021)DOI RIS ENW BIB - Influence of high pressure torsion on microstructure evolution and mechanical properties of AZ80/SiC magnesium matrix composites
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 826, ARTN 141916 (2021)DOI RIS ENW BIB - SHAPING A COMMUNITY: THE IMPACT OF THE MATERIALS PROCESSING & MANUFACTURING DIVISION
JOM, 2021, ARTN 04931-4 (2021)DOI RIS ENW BIB - Ti6Al7Nb-based TiB-reinforced composites by selective laser melting
J. Mater. Res., 36, 3691-3700 (2021)DOI RIS ENW BIB - Investigation on microstructure and texture evolution of Ti-6Al-3Nb-2Zr-1Mo alloy during hot deformation
MATERIALS RESEARCH EXPRESS, 8, ARTN 096520 (2021)DOI RIS ENW BIB - Improved fracture resistance of Cu/Mo bilayers with thickness tailoring
Scr. Mater., 202, ARTN 113994 (2021)DOI RIS ENW BIB - Nanocrystalline FeCr alloys synthesised by severe plastic deformation-A potential material for exchange bias and enhanced magnetostriction
J. Magn. Magn. Mater., 534, ARTN 168017 (2021)DOI RIS ENW BIB - Assessment of grain boundary cohesion of technically pure and boron micro-doped molybdenum via meso-scale three-point-bending experiments
Mater. Des., 207, ARTN 109848 (2021)DOI RIS ENW BIB - Enhancement of Interfacial Hydrogen Interactions with Nanoporous Gold-Containing Metallic Glass
ACS Appl. Mater. Interfaces, 13, 42613-42623 (2021)DOI RIS ENW BIB - Cryo-Casting for Controlled Decomposition of Cu-Zr-Al Bulk Metallic Glass into Nanomaterials: Implications for Design Optimization
ACS APPLIED NANO MATERIALS, 4, 7771-7780 (2021)DOI RIS ENW BIB - First-principles calculations to investigate pressure effect on mechanical and thermal properties of ZrAl2
Comput. Theor. Chem., 1202, ARTN 113304 (2021)DOI RIS ENW BIB - Mechanochemical Synthesis of Rosin-Modified Montmorillonite: A Breakthrough Approach to the Next Generation of OMMT/Rubber Nanocomposites
NANOMATERIALS, 11, ARTN 1974 (2021)DOI RIS ENW BIB - Influence of substructures on the selective laser melted Ti-6Al-4V alloy as a function of laser re-melting
J. Manuf. Process., 68, 1387-1394 (2021)DOI RIS ENW BIB - Effect of Interlayer Delay on the Microstructure and Mechanical Properties of Wire Arc Additive Manufactured Wall Structures
MATERIALS, 14, ARTN 4187 (2021)DOI RIS ENW BIB - Biomorphic porous Ti6Al4V gyroid scaffolds for bone implant applications fabricated by selective laser melting
PROGRESS IN ADDITIVE MANUFACTURING, 6, 455-469 (2021)DOI RIS ENW BIB - Effective Methanol Oxidation with Platinum Nanoparticles-Decorated Poly(2-bromomethyl-2-methyl-3,4-propylenedioxythiophene)-Coated Glassy Carbon Electrode
J. Electrochem. Soc., 168, ARTN 086503 (2021)DOI RIS ENW BIB - Atomic diffusivities in amorphous and liquid Cu-Zr: Kirkendall effects and dependence on packing density
Acta Mater., 214, ARTN 116993 (2021)DOI RIS ENW BIB - Copper and its effects on microstructure and correlated tensile properties of super duplex stainless steels
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 821, ARTN 141544 (2021)DOI RIS ENW BIB - Mechanisms controlling fracture toughness of additively manufactured stainless steel 316L
Int. J. Fract., 2021, ARTN 574-3 (2021)DOI RIS ENW BIB - Hardness and failure assessment of a hot extrusion punch during service
Eng. Fail. Anal., 125, ARTN 105382 (2021)DOI RIS ENW BIB - Selective Laser Melting of Al-7Si-0.5 Mg-0.5Cu: Effect of Heat Treatment on Microstructure Evolution, Mechanical Properties and Wear Resistance
Acta Metall. Sin.-Engl. Lett., 21, ARTN 01279 (2021)DOI RIS ENW BIB - Texture dependent strain hardening in additively manufactured stainless steel 316L
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 820, ARTN 141483 (2021)DOI RIS ENW BIB - Influence of Gradient Residual Stress and Tip Shape on Stress Fields Inside Indented TiN Hard Coating
Adv. Eng. Mater., 2021, ARTN 2100130 (2021)DOI RIS ENW BIB - Mechanical spectroscopy of metal/polymer composite membranes for hydrogen separation
J. Alloy. Compd., 866, ARTN 159014 (2021)DOI RIS ENW BIB - Powder Diffraction Data of Aluminum-Rich FCC-Ti1-xAlxN Prepared by CVD
COATINGS, 11, ARTN 683 (2021)DOI RIS ENW BIB - Spark plasma sintering of Ti6Al4V metal matrix composites: Microstructure, mechanical and corrosion properties
J. Alloy. Compd., 865, ARTN 158875 (2021)DOI RIS ENW BIB - On the behavior of rhenium under high-pressure torsion at room temperature
Mater. Lett., 292, ARTN 129634 (2021)DOI RIS ENW BIB - Origin of Electrocatalytic Activity in Amorphous Nickel-Metalloid Electrodeposits
ACS Appl. Mater. Interfaces, 13, 23689-23701 (2021)DOI RIS ENW BIB - Properties of HPT-Processed Large Bulks of p-Type Skutterudite DD0.7Fe3CoSb12 with ZT > 1.3
ACS Appl. Energ. Mater., 4, 4831-4844 (2021)DOI RIS ENW BIB - Electrospun polyacrylonitrile/2-(acryloyloxy)ethyl ferrocenecarboxylate polymer blend nanofibers
Mol. Syst. Des. Eng., 1, 1 (2021)DOI RIS ENW BIB - Spark plasma sintering of molybdenum silicides synthesized from oxide precursors
Ceram. Int., 47, 13827-13836 (2021)DOI RIS ENW BIB - Atomistic understanding of creep and relaxation mechanisms of Cu64Zr36 metallic glass at different temperatures and stress levels
J. Non-Cryst. Solids, 559, ARTN 120676 (2021)DOI RIS ENW BIB - Additive Manufacturing of Aluminum-Based Metal Matrix Composites-A Review
Adv. Eng. Mater., 2021, ARTN 2100053 (2021)DOI RIS ENW BIB - Microstructural evolution and mechanical properties of selective laser melted Ti-6Al-4V induced by annealing treatment
J. Cent. South Univ., 28, 1068-1077 (2021)DOI RIS ENW BIB - Origin of strain hardening in monolithic metallic glasses
Phys. Rev. B, 103, ARTN L140107 (2021)DOI RIS ENW BIB - Self-Reducing Silver Ink on Polyurethane Elastomers for the Manufacture of Thin and Highly Stretchable Electrical Circuits
Chem. Mat., 33, 2742-2755 (2021)DOI RIS ENW BIB - Influence of high-pressure torsion deformation on the corrosion behaviour of a bioresorbable Mg-based alloy studied by positron annihilation
Biomater. Sci., 2021, ARTN: 00166c (2021)DOI RIS ENW BIB - A universal criterion for the failure threshold in slowly sheared bulk metallic glasses
J. Appl. Phys., 129, ARTN 155109 (2021)DOI RIS ENW BIB - Annealing of Al-Zn-Mg-Cu Alloy at High Pressures: Evolution of Microstructure and the Corrosion Behavior
MATERIALS, 14, ARTN 2076 (2021)DOI RIS ENW BIB - The formation of TiO2/VO2 multilayer structure via directional cationic diffusion
Nanoscale, 13, 7783-7791 (2021)DOI RIS ENW BIB - Griffith's Legacy to Alloy Design and Beyond
JOM, 2021, ARTN 4667-1 (2021)DOI RIS ENW BIB - Influence of Microalloying Elements and Deformation Parameters on the Recrystallization and Precipitation Behavior of Two Low-Alloyed Steels
Steel Res. Int., 2021, ARTN 2100065 (2021)DOI RIS ENW BIB - Effect of Pressure and Temperature on Microstructure of Self-Assembled Gradient AlxTi1-xN Coatings
COATINGS, 11, ARTN 416 (2021)DOI RIS ENW BIB - Tailoring Extra-Strength of a TWIP Steel by Combination of Multi-Pass Equal-Channel Angular Pressing and Warm Rolling
METALS, 11, ARTN 518 (2021)DOI RIS ENW BIB - Synthesis of bulk reactive Ni-Al composites using high pressure torsion
J. Alloy. Compd., 857, ARTN 157503 (2021)DOI RIS ENW BIB - Phase Formation, Microstructure and Mechanical Properties of Mg67Ag33 as Potential Biomaterial
METALS, 11, ARTN 461 (2021)DOI RIS ENW BIB - Functionalized highly electron-rich redox-active electropolymerized 3,4-propylenedioxythiophenes as precursors and targets for bioelectronics and supercapacitors
Mol. Syst. Des. Eng., 6, 214-233 (2021)DOI RIS ENW BIB - Improved electro-mechanical reliability of flexible systems with alloyed Mo-Ta adhesion layers
Thin Solid Films, 720, ARTN 138533 (2021)DOI RIS ENW BIB - Correlation between internal states and creep resistance in metallic glass thin films
J. Appl. Phys., 129, ARTN 085302 (2021)DOI RIS ENW BIB - Influence of cold rolling on the fatigue crack growth behavior of tungsten
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 805, ARTN 140791 (2021)DOI RIS ENW BIB - X-ray Diffraction Computed Nanotomography Applied to Solve the Structure of Hierarchically Phase-Separated Metallic Glass
ACS Nano, 15, 2386-2398 (2021)DOI RIS ENW BIB - Selective laser melting of Ti6Al4V: Effect of laser re-melting
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 805, ARTN 140558 (2021)DOI RIS ENW BIB - Geometrical model for calculating the effect of surface morphology on total x-ray output of medical x-ray tubes
Med. Phys., 2021, ARTN 14649 (2021)DOI RIS ENW BIB - Adhesion evaluation of thin films to dielectrics in multilayer stacks: A comparison of four-point bending and stressed overlayer technique
Mater. Des., 200, ARTN 109451 (2021)DOI RIS ENW BIB - Effect of alloying elements on hydrogen enhanced decohesion in bcc iron
Comput. Mater. Sci., 188, ARTN 110215 (2021)DOI RIS ENW BIB - Optimization of Mechanical Properties and Damage Tolerance in Polymer-Mineral Multilayer Composites
MATERIALS, 14, ARTN 725 (2021)DOI RIS ENW BIB - The Impact Resistance of Highly Densified Metal Alloys Manufactured from Gas-Atomized Pre-Alloyed Powders
COATINGS, 11, ARTN 216 (2021)DOI RIS ENW BIB - The S-content-dependent lattice structure evolution and bandgap modulation in quaternary MgZnOS alloy films
J. Phys. D-Appl. Phys., 54, ARTN 065104 (2021)DOI RIS ENW BIB - Direct determination of the area function for nanoindentation experiments
J. Mater. Res., 37, ARTN: 43578 (2021)DOI RIS ENW BIB - High entropy alloy nanocomposites produced by high pressure torsion
Acta Mater., 208, ARTN 116714 (2021)DOI RIS ENW BIB - Stress intensity factor for w-shape tension specimens
Eng. Fract. Mech., 242, ARTN 107478 (2021)DOI RIS ENW BIB - Microstructural Effects on the Interfacial Adhesion of Nanometer-Thick Cu Films on Glass Substrates: Implications for Microelectronic Devices
ACS APPLIED NANO MATERIALS, 4, 61-70 (2021)DOI RIS ENW BIB - Composite of medium entropy alloys synthesized using spark plasma sintering
Scr. Mater., 191, 46-51 (2021)DOI RIS ENW BIB - Stress-strain behavior and microstructural evolution of ultra-high carbon Fe-C-Cr-V-Mo steel subjected to hot deformation
Mater. Charact., 171, ARTN 110746 (2021)DOI RIS ENW BIB - Core-shell structured NiCo2O4@Ni(OH)(2) nanomaterials with high specific capacitance for hybrid capacitors
Ionics, ARTN 03817 (2021)DOI RIS ENW BIB - Influence of the nitrogen content on the structure and properties of MoNbTaVW high entropy alloy thin films
J. Alloy. Compd., 850, ARTN 156740 (2021)DOI RIS ENW BIB - Controlling the high temperature deformation behavior and thermal stability of ultra-fine-grained W by re alloying
J. Mater. Res., 1, ARTN: 43578 (2021)DOI RIS ENW BIB - Microstructure, strength and fracture toughness of CuNb nanocomposites processed with high pressure torsion using multi-sector disks
Scr. Mater., 189, 48-52 (2020)DOI RIS ENW BIB - Influence of combinatorial annealing and plastic deformation treatments on the intrinsic properties of Cu46Zr46Al8 bulk metallic glass
Intermetallics, 127, ARTN 106986 (2020)DOI RIS ENW BIB - Two-dimensional SnO ultrathin epitaxial films: Pulsed laser deposition growth and quantum confinement effects
Physica B, 599, ARTN 412467 (2020)DOI RIS ENW BIB - Selective laser melting of high-strength, low-modulus Ti-35Nb-7Zr-5Ta alloy
MATERIALIA, 14, ARTN 100941 (2020)DOI RIS ENW BIB - Phase change memory based on Ta-Sb-Te alloy -Towards a universal memory
MATERIALS TODAY PHYSICS, 15, ARTN 100266 (2020)DOI RIS ENW BIB - Effective electrocatalytic methanol oxidation of Pd-based metallic glass nanofilms
Nanoscale, 12, 22586-22595 (2020)DOI RIS ENW BIB - In situ high-energy X-ray diffraction study of thermally -activated martensitic transformation far below room temperature in CuZr-based bulk metallic glass composites
J. Alloy. Compd., 841, ARTN 155781 (2020)DOI RIS ENW BIB - A new approach to evaluate the elastic modulus of metallic foils
Mater. Des., 196, ARTN 109149 (2020)DOI RIS ENW BIB - The role of crystallographic texture on mechanically induced grain boundary migration
Acta Mater., 200, 404-416 (2020)DOI RIS ENW BIB - Strain Induced Anisotropic Magnetic Behaviour and Exchange Coupling Effect in Fe-SmCo5 Permanent Magnets Generated by High Pressure Torsion
Crystals, 10, ARTN 1026 (2020)DOI RIS ENW BIB - Surface oxidation of nanocrystalline CVD TiB2 hard coatings revealed by cross-sectional nano-analytics and in-situ micro-cantilever testing
Surf. Coat. Technol., 399, ARTN 126181 (2020)DOI RIS ENW BIB - Nanoindentation and microbending analyses of glassy and crystalline Zr (-Hf)-Cu thin-film alloys
Surf. Coat. Technol., 399, ARTN 126139 (2020)DOI RIS ENW BIB - Nanoscale stress distributions and microstructural changes at scratch track cross-sections of a deformed brittle-ductile CrN-Cr bilayer
Mater. Des., 195, ARTN 109023 (2020)DOI RIS ENW BIB - Selective Laser Melting of Aluminum and Its Alloys
MATERIALS, 13, ARTN 4564 (2020)DOI RIS ENW BIB - Nd3+ ions induced rational morphology control of transition metal oxides for high energy storage performance
J. Power Sources, 472, ARTN 228599 (2020)DOI RIS ENW BIB - Effect of Carbon in Severe Plastically Deformed Metals
Adv. Eng. Mater., 22, ARTN 2000879 (2020)DOI RIS ENW BIB - Severe Plastic Deformation and Thermomechanical Processing: Nanostructuring and Properties
METALS, 10, ARTN 1306 (2020)DOI RIS ENW BIB - Intrinsic and extrinsic effects on the brittle-to-ductile transition in metallic glasses
J. Appl. Phys., 128, ARTN 125102 (2020)DOI RIS ENW BIB - Effect of TiB(2)particle size on the material transfer behaviour of Cu-TiB(2)composites
Mater. Sci. Technol., 36:15, 1685-1694 (2020)DOI RIS ENW BIB - Multi-scale interface design of strong and damage resistant hierarchical nanostructured materials
Mater. Des., 196, ARTN 109169 (2020)DOI RIS ENW BIB - Atomic-scale study on incoherent twin boundary evolution in nanograined Cu
Scr. Mater., 186, 278-281 (2020)DOI RIS ENW BIB - In-operando fatigue behavior of gold metallization lines on polyimide substrate
Scr. Mater., 186, 48-51 (2020)DOI RIS ENW BIB - Thermal stabilization of metal matrix nanocomposites by nanocarbon reinforcements
Scr. Mater., 186, 202-207 (2020)DOI RIS ENW BIB - Fracture properties of thin film TiN at elevated temperatures
Mater. Des., 194, ARTN 108885 (2020)DOI RIS ENW BIB - Verification of the generalised chemical potential for stress-driven hydrogen diffusion in nickel
Philos. Mag. Lett., 2020, ARTN 1808253 (2020)DOI RIS ENW BIB - EBSD characterization of pure and K -doped tungsten fibers annealed at different temperatures
J. Nucl. Mater., 537, UNSP 152201 (2020)DOI RIS ENW BIB - Atomic -scale investigation on the structural evolution and deformation behaviors of Cu-Cr nanocrystalline alloys processed by high-pressure torsion
J. Alloy. Compd., 832, ARTN 154994 (2020)DOI RIS ENW BIB - Influence of TiO 2 charge and BSA -metal ion complexation on retention of Cr (VI) in ultrafiltration process
J. Alloy. Compd., 832, ARTN 153986 (2020)DOI RIS ENW BIB - Balancing the electro-mechanical and interfacial performance of Mo-based alloy films
MATERIALIA, 12, ARTN 100774 (2020)DOI RIS ENW BIB - Thermomechanical and structural characterization of polybutadiene/poly(ethylene oxide)/CNT stretchable electrospun fibrousmembranes
Polym. Adv. Technol., 2020, 248-261 (2020)DOI RIS ENW BIB - Balancing the strength and ductility of graphene oxide-carbon nanotube hybrid reinforced aluminum matrix composites with bimodal grain distribution
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 796, ARTN 140067 (2020)DOI RIS ENW BIB - Novel intermetallic-reinforced near-alpha Ti alloys manufactured by spark plasma sintering
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 792, ARTN 139798 (2020)DOI RIS ENW BIB - Achieving work hardening by forming boundaries on the nanoscale in a Ti-based metallic glass matrix composite
J. Mater. Sci. Technol., 50, 192-203 (2020)DOI RIS ENW BIB - Mapping the mechanical properties in nitride coatings at the nanometer scale
Acta Mater., 194, 343-353 (2020)DOI RIS ENW BIB - Metallic Glass Films with Nanostructured Periodic Density Fluctuations Supported on Si/SiO(2)as an Efficient Hydrogen Sorber
Chem.-Eur. J., 26, 8244-8253 (2020)DOI RIS ENW BIB - Fatigue crack threshold analysis of TiAl SENT and CC specimens - Influence of starter notch and precracking
Intermetallics, 121, ARTN 106770 (2020)DOI RIS ENW BIB - Extraordinary high-temperature behavior of electrically conductive Hf7B23Si22C6N40 ceramic film
Surf. Coat. Technol., 391, ARTN 125686 (2020)DOI RIS ENW BIB - Effect of tempering and deep cryogenic treatment on microstructure and mechanical properties of Cr-Mo-V-Ni steel
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 787, ARTN 139520 (2020)DOI RIS ENW BIB - The Relationships of Microscopic Evolution to Resistivity Variation of a FIB-Deposited Platinum Interconnector
MICROMACHINES, 11, ARTN 588 (2020)DOI RIS ENW BIB - Mechanical and optical degradation of flexible optical solar reflectors during simulated low earth orbit thermal cycling
Acta Astronaut., 175, 277-289 (2020)DOI RIS ENW BIB - Microstructural evolution of W-10Re alloys due to thermal cycling at high temperatures and its impact on surface degradation
Int. J. Refract. Met. Hard Mat., 92, ARTN 105285 (2020)DOI RIS ENW BIB - Microscopic Mechanism of Carbon-Dopant Manipulating Device Performance in CGeSbTe-Based Phase Change Random Access Memory
ACS Appl. Mater. Interfaces, 12, 23051-23059 (2020)DOI RIS ENW BIB - Hydrogen Trapping in bcc Iron
MATERIALS, 13, ARTN 2288 (2020)DOI RIS ENW BIB - Temperature dependence of surface and grain boundary energies from first principles
Phys. Rev. B, 101, ARTN 174103 (2020)DOI RIS ENW BIB - High pressure torsion induced lowering of Young's modulus in high strength TNZT alloy for bio-implant applications
J. Mech. Behav. Biomed. Mater., 108, UNSP 103839 (2020)DOI RIS ENW BIB - Synthesis of nanodiamond reinforced silver matrix nanocomposites: Microstructure and mechanical properties
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 782, ARTN 139254 (2020)DOI RIS ENW BIB - Premature failure of an additively manufactured material
NPG Asia Mater., 12, ARTN 30 (2020)DOI RIS ENW BIB - Microstructure, Texture, and Strength Development during High-Pressure Torsion of CrMnFeCoNi High-Entropy Alloy
Crystals, 10, ARTN 336 (2020)DOI RIS ENW BIB - The effect of grain size on the fatigue overload behaviour of nickel
Mater. Des., 189, ARTN 108526 (2020)DOI RIS ENW BIB - Influence of WC-Co hard metal microstructure on defect density, initiation and propagation kinetics of fatigue cracks starting at intrinsic and artificial defects under a negative stress ratio
Acta Mater., 188, 30-39 (2020)DOI RIS ENW BIB - An SEM compatible plasma cell for in situ studies of hydrogen-material interaction
Rev. Sci. Instrum., 91, ARTN 043705 (2020)DOI RIS ENW BIB - Open-cell tungsten nanofoams: Chloride ion induced structure modification and mechanical behavior
Results Phys., 17, ARTN 103062 (2020)DOI RIS ENW BIB - Oligoether Ester-Functionalized ProDOT Copolymers on Si/Monolayer Graphene as Capacitive Thin Film Electrodes
J. Electrochem. Soc., 167, ARTN 070543 (2020)DOI RIS ENW BIB - A Modified Electrochemical Nanoindentation Setup for Probing Hydrogen-Material Interaction Demonstrated on a Nickel-Based Alloy
JOM, 72, 2020-2029 (2020)DOI RIS ENW BIB - Fatigue crack growth model including load sequence effects - Model development and calibration for railway axle steels
Int. J. Fatigue, 132, ARTN 105377 (2020)DOI RIS ENW BIB - Nanoscale evolution of stress concentrations and crack morphology in multilayered CrN coating during indentation: Experiment and simulation
Mater. Des., 188, ARTN 108478 (2020)DOI RIS ENW BIB - Metal flow behavior of P/M connecting rod preform in flashless forging based on isothermal compression and numerical simulation
J. Mater. Res. Technol-JMRT, 9, 1200-1209 (2020)DOI RIS ENW BIB - Strain perceptibility of elements on the diffusion in Zr-based amorphous alloys
Sci Rep, 10, ARTN 4575 (2020)DOI RIS ENW BIB - Study on Ca Segregation toward an Epitaxial Interface between Bismuth Ferrite and Strontium Titanate
ACS Appl. Mater. Interfaces, 12, 12264-12274 (2020)DOI RIS ENW BIB - Fatigue crack growth in full-scale railway axles - Influence of secondary stresses and load sequence effects
Int. J. Fatigue, 132, ARTN 105360 (2020)DOI RIS ENW BIB - Probing defect relaxation in ultra-fine grained Ta using micromechanical spectroscopy
Acta Materialia, 185, 309-319 (2020)DOI RIS ENW BIB - Non-destructive Testing of Thin Birch (Betula pendula Roth.) Veneers
BioResources, 15, 1265-1281 (2020)DOI RIS ENW BIB - Stability, elasticity and electronic structures of Co-Zr binary intermetallic compounds
Philos. Mag., 2020, ISSN 1478-6435 (2020)DOI RIS ENW BIB - The effect of anisotropic microstructure on the crack growth and fatigue overload behaviour of ultrafine-grained nickel
Acta Mater., 184, 225-240 (2020)DOI RIS ENW BIB - Sputter deposition of NiW films from a rotatable target
Appl. Surf. Sci., 511, ARTN 145616 (2020)DOI RIS ENW BIB - Ageing Behaviour of Al-Mg-Si Alloys After Cryogenic and Room Temperature Deformation
materials, 13, ARTN 13030554 (2020)DOI RIS ENW BIB - Angular resolved mass-energy analysis of species emitted from a dc magnetron sputtered NiW-target
J. Vac. Sci. Technol. A, 38, ARTN 023401 (2020)DOI RIS ENW BIB - Microstructural evolution during heating of CNT/Metal Matrix Composites processed by Severe Plastic Deformation
Sci Rep, 10:857, ARTN 57946-3 (2020)DOI RIS ENW BIB - Magnetic dilution by severe plastic deformation
AIP Advances, 10, ARTN 015210 (2020)DOI RIS ENW BIB - 4-aminophenyl sulfone (APS) as novel monomer in fabricating paper based TFC composite for forward osmosis: Selective layer optimization
Journal of Environmental Chemical Engineering, 8, ARTN 103664 (2020)DOI RIS ENW BIB - Microstructures, Mechanical Properties, and Corrosion Behaviors of Refractory High-Entropy ReTaWNbMo Alloys
J. Mater. Eng. Perform., 29, 399-409 (2020)DOI RIS ENW BIB - Tailoring ultra-strong nanocrystalline tungsten nanofoams by reverse phase dissolution
Acta MaterialiaElsevier, 182, 215-225 (2020)DOI RIS ENW BIB - Inconel-steel multilayers by liquid dispersed metal powder bed fusion: Microstructure, Residual stress and Property Gradients
Additive Manufacturing, 32, ARTN 101027 (2019)DOI RIS ENW BIB - Novel a + b Type Ti-Fe-Cu Alloys Containing Sn with Pertinent Mechanical Properties
metals, 10, 1-12 (2019)DOI RIS ENW BIB - Electrocatalytic Behavior of Hydrogenated Pd-Metallic Glass Nanofilms: Butler-Volmer, Tafel, and Impedance Analyses
Electrocatalysis, 11, 94-109 (2019)DOI RIS ENW BIB - Reversing and non-reversing effects of PEEK-HA composites on tuning cooling rate during crystallization
J. Polym. Res., 26, ARTN 279 (2019)DOI RIS ENW BIB - Fatique crack growth in railway axle specimens - Transferability and model validation
International Journal of Fatigue, 133, ARTN 105421 (2019)DOI RIS ENW BIB - Combined Fe and O effects on microstructural evolution and strengthening in Cu-Fe nanocrystalline alloys
Materials Science & Engineering, 772, ARTN 138800 (2019)DOI RIS ENW BIB - In situ fabrication of TiC-NiCr cermets by selective laser melting
International Journal of Refractory Metals & Hard Materials, 87, ARTN 105171 (2019)DOI RIS ENW BIB - Understanding structural evolution of nanostructures during deformation form 2D (3D) Experiments
IOP Conference SeriesMaterials Science and Engineering, 580, ARTN 012021 (2019)DOI RIS ENW BIB - Ultrafine-grained Tungsten by High-Pressure Torsion-Bulk precursor versus powder processing route
IOP Conference Series: Materials Science and Engineering, 580, ARTN 012051 (2019)DOI RIS ENW BIB - Application of the material inhomogeneity effect for the improvement of fracture toughness of a brittle polymer
Engineering Fracture Mechanics, 224, ARTN 106776 (2019)DOI RIS ENW BIB - Stress-controlled decomposition routes in cubic AlCrN films assessed by in-situ high-temperature high-energy grazing incidence transmission X-ray diffraction
Scientific ReportsNature, 9, ARTN 18027 (2019)DOI RIS ENW BIB - Microstructure and stress gradients in TiW thin films characterized by 40 nm X-ray diffraction and transmission electron microscopy
Thin Solid Films, 691, ARTN 137576 (2019)DOI RIS ENW BIB - Novel welding of Al0.5CoCrFeNi high-entropy alloy: Corrosion behavior
Journal of Alloys and Compounds, 817, ARTN 153163 (2019)DOI RIS ENW BIB - Growth-twins in CrN/AlN multilayers induced by hetero-phase interfaces
Acta Materialia, 185, 157-170 (2019)DOI RIS ENW BIB - The sputter performance of an industrial-scale planar Mo-target over its lifetime: Target erosion and film properties
Surface & Coatings Technology, 381, ARTN 125174 (2019)DOI RIS ENW BIB - Biegsames Glas statt Scherben
Kronen Zeitung, 19 (2019)RIS ENW BIB - Investigation of high cyclic fatigue behaviour of thin copper films using MEMS structure
Int. J. Fatigue, 128, ARTN 105179 (2019)DOI RIS ENW BIB - Effect of Re on microstructural evolution and densification kinetics during spark plasma sintering of nanocrystalline W
Adv. Powder Technol., 30, 2779-2786 (2019)DOI RIS ENW BIB - Combined thermo-physical investigations of thin layers with Time Domain Thermoreflectance and Scanning Thermal Microscopy on the example of 500 nm thin, CVD grown tungsten
Thermochim. Acta, 681, ARTN 178373 (2019)DOI RIS ENW BIB - Highly ductile amorphous oxide at room temperature and high strain rate
Science, 366, 864-869 (2019)DOI RIS ENW BIB - Bioinspired toughness improvement through soft interlayers in mineral reinforced polypropylene
Mechanics of Materials, 1 40, ARTN 103243 (2019)DOI RIS ENW BIB - Tuneable Magneto-Resistance by Severe Plastic Deformation
metals, 2019, ARTN 1188 (2019)DOI RIS ENW BIB - Aluminum matrix composites reinforced with metallic glass particles with core-shell structure
Materials Science & Engineering, A 771, ARTN 138630 (2019)DOI RIS ENW BIB - On the Room-Temperature Mechanical Properties of an Ion-Irradiated TiZrNbHfTa Refractory High Entropy Alloy
JOM, 2019, ARTN 3861-6 (2019)DOI RIS ENW BIB - Development of Damage - Tolerant and Fracture-Resistant Materials by Utilizing the Material Inhomogeneity Effect
ASMEJournal of Applied Mechanics, 86, 111004-1-111004-12 (2019)DOI RIS ENW BIB - Evolution of Bimodal Microstructure and High-Temperature Wear Resistance of Al-Cu-Ni Alloys
Communication, A, ARTN 5518 (2019)DOI RIS ENW BIB - Effect of Heterophase Interfaces on Microstructure and Crystallographic Texture Evolution During Rolling of Directionally Solidified Ag-Cu Eutectic Alloy
Metall. Mater. Trans. A-Phys. Metall. Mater. Sci., 51, 368-379 (2019)DOI RIS ENW BIB - Optimizing the magnetic properties of Fe-based amorphous powder by adjusting atomic structures from vitrification at different temperatures
Journal of Applied Physics, 126, ARTN 165109 (2019)DOI RIS ENW BIB - Damage tolerance of lamellar bone
Bone, 130, ARTN 115102 (2019)DOI RIS ENW BIB - Point-defect engineering of MoN/TaN superlattice films: A first-principles and experimental study
Mater. Des., 186, ARTN 108211 (2019)DOI RIS ENW BIB - High density of genuine growth twins in electrodeposited aluminium
Materials Science, 5, eaax3894 (2019)DOI RIS ENW BIB - Mechanical properties and epitaxial growth of TiN/AlN superlattices
Surf. Coat. Technol., 375, 1-7 (2019)DOI RIS ENW BIB - New Developments in Nanomechanical Methods
JOM, 71, 3340-3342 (2019)DOI RIS ENW BIB - CROSS-SECTIONAL GRADIENTS OF RESIDUAL STRESSES, MICROSTRUCTURE AND PHASES IN A NITRIDED STEEL REVEALED BY 20 mu m SYNCHROTRON X-RAY DIFFRACTION
Metall. Ital., 6-10 (2019)RIS ENW BIB - Hierarchically-structured large superelastic deformation in ferroelastic-ferroelectrics
Acta Materialia, 181/2019, 501-509 (2019)DOI RIS ENW BIB - Au–Sn solders applied in transient liquid phase bonding: Microstructure and mechanical behavior
Materialia, 8, ARTN 100503 (2019)DOI RIS ENW BIB - Coiled artificial muscles based on UHMWPE with large muscle stroke
Materials Today Communications, 21 (2019), ARTN 100688 (2019)DOI RIS ENW BIB - Microstructural characterization of medium entropy alloy thin films
Scripta Materialia, 177, 22-26 (2019)DOI RIS ENW BIB - Correlation of mechanical damage and electrical behavior of Al/Mo bilayers subjected to bending
Thin Solid Films, 687, UNSP 137480 (2019)DOI RIS ENW BIB - Water in Mesoporous Confinement: Glass-To-Liquid Transition or Freezing of Molecular Reorientation Dynamics?
Molecules, 24/2019, ARTN 3563 (2019)DOI RIS ENW BIB - The Influence of Partial Replacement of Cu with Ga on the Corrosion Behavior of Ti40Zr10Cu36Pd14 Metallic Glasses
Journal of The Electrochemical Society, 166, 485-491 (2019)DOI RIS ENW BIB - Mechanochemical reaction of Al and melamine: a potential approach towards the in situ synthesis of aluminum nitride - carbon nanotube nanocomposites
PCCP, 21, 22121-22131 (2019)DOI RIS ENW BIB - The creep behavior of a fully lamellar γ-TiAl based alloy
Intermetallics, 114, ARTN 106611 (2019)DOI RIS ENW BIB - Microstructure and mechanical property of bimodal-size metallic glass particle-reinforced Al alloy matrix composites
Journal of Alloys and Compounds, 814, ARTN 152317 (2019)DOI RIS ENW BIB - Correlating elemental distribution with mechanical properties of TiN/SiNx nanocomposite coatings
Scr. Mater., 170, 20-23 (2019)DOI RIS ENW BIB - Elastic Properties and Stacking Fault Energies of Borides, Carbides and Nitrides from First-Principles Calculations
Acta Metall. Sin.-Engl. Lett., 32, 1099-1110 (2019)DOI RIS ENW BIB - Friction and Tribo-Chemical Behavior of SPD-Processed CNT-Reinforced Composites
LUBRICANTS, 7, ARTN 75 (2019)DOI RIS ENW BIB - Mechanical Behavior of Ti6Al4V Scaffolds Filled with CaSiO3 for Implant Applications
applied sciences, 2019, ARTN 3844 (2019)DOI RIS ENW BIB - Investigation of Compatibility Between M-Cr-Al-X Thermal Spray Coatings and Third Generation y-TiAl Alloys
Journal of Materials Engineering and Performance, 8, 1059-9495 (2019)DOI RIS ENW BIB - Effect of lattice surface treatment on performance of hardmetal - titanium interpenetrating phase composites
International Journal of Refractory Metals & Hard Materials, 86, ARTN 105087 (2019)DOI RIS ENW BIB - Tungsten Matrix Composite Reinforced with CoCrFeMnNi High-Entropy Alloy: Impact of Processing Routes on Microstructure and Mechanical Properties
metals, 9, 12 (2019)DOI RIS ENW BIB - Fracture behavior and deformation mechanisms in nanolaminated crystalline/amorphous micro-cantilevers
ElsevierActa Materialia, 180 (2019), 73-83 (2019)DOI RIS ENW BIB - Thermodynamic and mechanical stability of Ni3X-type intermetallic compounds
ElsevierIntermetallics, 9 (2019)DOI RIS ENW BIB - Toughening in nanosilica-reinforced epoxy with tunable filler-matrix interface properties
Compos. Sci. Technol., 183, ARTN 107799 (2019)DOI RIS ENW BIB - Atomic resolution analyses on defects in nanocrystalline Cu-based alloys generated by severe plastic deformation
Mater. Charact., 157, ARTN 109886 (2019)DOI RIS ENW BIB - Selective laser melting of 316L stainless steel: Influence of TIB2 addition on microstructure and mechanical properties
Materials Today CommunicationsElsevier, 21, 100615 (2019)DOI RIS ENW BIB - Quasicrystalline Composites by Additive Manufacturing
Key Engineering Materials, 818, 72-76 (2019)DOI RIS ENW BIB - Modulating heterogeneity and plasticity in bulk metallic glasses: Role of interfaces on shear banding
Int. J. Plast., 119, 156-170 (2019)DOI RIS ENW BIB - Investigation of structure and mechanical properties of TiZrHfNiCuCo high entropy alloy thin films synthesized by magnetron sputtering
J. Alloy. Compd., 797, 834-841 (2019)DOI RIS ENW BIB - 20 Hz synchrotron X-ray diffraction analysis in laser-pulsed WC-Co hard metal reveals oscillatory stresses and reversible composite plastification
Int. J. Refract. Met. Hard Mat., 82, 121-128 (2019)DOI RIS ENW BIB - Evolution of the lattice defects and crystalline domain size in carbon nanotube metal matrix composites processed by severe plastic deformation
Mater. Charact., 154, 344-352 (2019)DOI RIS ENW BIB - Microstructure and mechanical properties of Al-12Si and Al-3.5 Cu-1.5Mg-1Si bimetal fabricated by selective laser melting
Journal of Materials Science & Technology, 36, 18-26 (2019)DOI RIS ENW BIB - Facile preparation of superhydrophobic wood surfaces via spraying of aqueous alkyl ketene dimer dispersions
RSC ADVANCES, 9, 24357-24367 (2019)DOI RIS ENW BIB - Compositional tuning-induced permanent color adjustment and mechanical properties: Binary Cu-Mg colored metallic system
Mater. Des., 175, ARTN 107814 (2019)DOI RIS ENW BIB - Synthesis of new glassy Mg-Ca-Zn alloys with exeptionally low Young´s Modulus: Exploring near eutectic compositions
Scripta MaterialiaScience Direct, 173, 137-143 (2019)DOI RIS ENW BIB - Resolving the FCC/HCP interfaces of the gamma '(Ag2Al) precipitate phase in aluminium
Acta Mater., 174, 116-130 (2019)DOI RIS ENW BIB - A Novel Setup for In Situ Monitoring of Thermomechanically Cycled Thin Film Metallizations
The Minerals, Metals & Materials SocietyJOM, ARTN: 1543-1851 (2019)DOI RIS ENW BIB - Face centered cubic titanium in high pressure torsion processed carbon nanotubes reinforced titanium composites
ElsevierJournal of Alloys and Compounds, 939-945 (2019)DOI RIS ENW BIB - Face centered cubic titanium in high pressure torsion processed carbon nanotubes reinforced titanium composites
Journal of Alloys and Compounds, 939-945 (2019)DOI RIS ENW BIB - Evaluation of hydrogen storage perfomance of ZrTiVNiCrFe in electrochemical and gas-solid reactions
International Journal of Hydrogen Energy, 2019, ARTN 0360-3199 (2019)DOI RIS ENW BIB - Anisotropy in fracture and fatigue resistance of pearlitic steels and its effect on the crack path
Int. J. Fatigue, 124, 528-536 (2019)DOI RIS ENW BIB - On the onset of deformation twinning in the CrFeMnCoNi high-entropy alloy using a novel tensile specimen geometry
Intermetallics, 110, UNSP 106469 (2019)DOI RIS ENW BIB - Comparison of the Dislocation Structure of a CrMnN and a CrNi Austenite after Cyclic Deformation
metals 2019, 9, ARTN 784 (2019)DOI RIS ENW BIB - Evaluation of the intergranular crack growth resistance of ultrafine grained tungsten materials
Actra Materialia, 176, 330-340 (2019)DOI RIS ENW BIB - Impact of the scanning strategy on the mechanical behavior of 316L steel synthesized by selective laser melting
Journal of Manufacturing Processes, 255-261 (2019)DOI RIS ENW BIB - Microstructure and Mechanical Properties of Al-(12-20) Si Bi-Material Fabricated by Selective Laser Melting
materials, 12, ARTN 2126 (2019)DOI RIS ENW BIB - Influence of crystal orientation and Berkovich trip rotation on the mechanical characterization of grain boundaries in molybdenum
Materials and Design, 182 (2019), ARTN 107998 (2019)DOI RIS ENW BIB - Microstructure and Mechanical Properties of Al-(12-20)Si Bi-Material Fabricated by Selective Laser Melting
Materials, 12, ARTN 2126 (2019)DOI RIS ENW BIB - Microstructure and Failure Characteristics of Nanostructured Molybdenum-Cooper Composites
Advanced Engineering Materials, 2019, ARTN 1900474 (2019)DOI RIS ENW BIB - Investigation of high cyclic fatigue behaviour of thin copper films using MEMS structure
Int. Journal of Fatique, 128, ARTN 105179 (2019)DOI RIS ENW BIB - Stability of the B2 CuZr phase in Cu-Zr-Al-Sc bulk metallic glass matrix composites
J. Alloy. Compd., 790, 657-665 (2019)DOI RIS ENW BIB - High-Pressure Torsion Deformation Induced Phase Transformations and Formations: New Material Combinations and Advanced Properties
Materials Transactions, No.7, 1256-1269 (2019)DOI RIS ENW BIB - The preparation of surfactant-free highly dispersed ethylene glycol-based aluminum nitride-carbon nanofluids for heat transfer application
Advanced Powder Technology, 30/2019, 2032-2041 (2019)DOI RIS ENW BIB - Friction welding of electron beam melted Ti-6Al-4V
Materials Science & Engineering A, 761, ARTN 138045 (2019)DOI RIS ENW BIB - In situ analysis of the effect of high heating rates and initial microstructure on the formation and homogeneity of austenite
J. Mater. Sci., 54, 9197-9212 (2019)DOI RIS ENW BIB - Investigation of Zr55Cu30Al10Ni5 bulk amorphous alloy crystallization
J. Alloy. Compd., 791, 477-482 (2019)DOI RIS ENW BIB - Micromechanical and microstructural properties of tungsten fibers in the as-produced and annealed state: Assessment of the potassium doping effect
Int. J. Refract. Met. Hard Mat., 81, 253-271 (2019)DOI RIS ENW BIB - Characterization of the chips generated by the nanomachining of germanium for X-ray crystal optics
Int. J. Adv. Manuf. Technol., 102, 2757-2767 (2019)DOI RIS ENW BIB - Measurement of local strain
MRS Bulletin, Vol. 44/ Issue 6, 459-464 (2019)DOI RIS ENW BIB - Saturation of Grain Refinement during Severe Plastic Deformation of Single Phase Materials: Reconsiderations, Current Status and Open Questions
Mater. Trans., 60, 1270-1282 (2019)DOI RIS ENW BIB - The preparation of surfactant-free highly dispersed ethylene glycol-based aluminum nitride-carbon nanofluids for heat transfer application
Adv. Powder Technol., 30, 2032-2041 (2019)DOI RIS ENW BIB - Direct measurement of nanostructural change during in situ deformation of a bulk metallic glass
Naturenature communications, 2019 (10), 2445 (2019)DOI RIS ENW BIB - Exceptional fracture resistance of ultrathin metallic glass films due to an intrinsic size effect
Scientic Reports, 9, ARTN 8281 (2019)DOI RIS ENW BIB - An investigation on diffusivity while achieving a cylindrical aluminide coating on metals using simultaneous spark plasma sintering of powers
Scripta Materialia, 170(2019), 156-160 (2019)DOI RIS ENW BIB - Crack deflecting microstructure for improved electro-mechanical lifetimes of flexible systems
Mater. Lett., 244, 47-49 (2019)DOI RIS ENW BIB - Effect of TiB2 particles on microstructure and crystallographic texture of Al-12Si fabricated by selective laser melting
J. Alloy. Compd., 786, 551-556 (2019)DOI RIS ENW BIB - A study on the micro-evolution of mechanical property and microstructures in (Cu-30Fe)-2X alloys with the addition of minor alloying elements
J. Alloy. Compd., 786, 341-345 (2019)DOI RIS ENW BIB - Fracture properties of ultrafine grain chromium correlated to single dislocation processes at room temperature
Journal of Materials Research, 2019, 2370-2383 (2019)DOI RIS ENW BIB - A comparative study of glass-forming ability, crystallization kinetics and mechanical properties of Zr55Co25Al20 and Zr52Co25Al23 bulk metallic glasses
J. Alloy. Compd., 785, 422-428 (2019)DOI RIS ENW BIB - Correlating structural and mechanical properties of AlN/TiN superlattice films
Scr. Mater., 165, 159-163 (2019)DOI RIS ENW BIB - Investigation on the Relationship Between Transition Energy and the Color Change of Cu-M Alloys
Met. Mater.-Int., 25, 539-545 (2019)DOI RIS ENW BIB - Influence of annealing on microstructure and mechanical properties of ultrafine-grained Ti45Nb
Materials and Design, 179 (2019), ARTN 107864 (2019)DOI RIS ENW BIB - New approaches in lowering the gas-phase synthesis temperature of TiO2 nanoparticles by H2O-assisted atmospheric pressure CVS process
J. Mater. Res. Technol-JMRT, 8, 3024-3035 (2019)DOI RIS ENW BIB - Hydrogen-enhanced decohesion mechanism of the special E5(0 1 2) [1 0 0] grain boundary in Ni with Mo and C solutes
Computational Materials ScienceScience Direct, 167, 100-110 (2019)DOI RIS ENW BIB - Electron Irradiation Effects on Strength and Ductility of Polymer Foils Studied by Femtosecond Laser-Processed Micro-Tensile Specimens
Materials, 12, ARTN 1468 (2019)DOI RIS ENW BIB - Annealing-assisted high-pressure torsion in Zr(55)Cu(30)Al(10)Ni(5 )metallic glass
J. Alloy. Compd., 784, 1323-1333 (2019)DOI RIS ENW BIB - Dissimilar welding of Al0.1CoCrFeNi high-entropy alloy and AISI304 stainless steel
Journal of Materials Research, 34, 2683-2694 (2019)DOI RIS ENW BIB - Initiation and stagnation of room temperature grain coarsening in cyclically strained gold films
Acta Mater., 169, 99-108 (2019)DOI RIS ENW BIB - Structure-Property Relationships in Shape Memory Metallic Glass Composites
Materials, 12, ARTN 1419 (2019)DOI RIS ENW BIB - Mechanochemical synthesis and hydrogenation behavior of (TiFe)100-xNix alloys
Journal of Alloys and CompoundsElsevierScienceDirect, 796, 42-46 (2019)DOI RIS ENW BIB - Bioceramic scaffolds by additive manufacturing for controlled delivery of the antibiotic vancomycin
Proceedings of the Estonian Academy of Sciences, 68, 185-190 (2019)DOI RIS ENW BIB - In-Situ Synchotron Profile Analysis after High-Pressure Torsion Deformation
crystalsMDPI, 9, 232 (2019)DOI RIS ENW BIB - Tuning the glass forming ability and mechanical properties of Ti-based bulk metallic glasses by Ga additions
Journal of Alloys and CompoundsElsevierScience Direct, 793, 552-563 (2019)DOI RIS ENW BIB - Surface structuring by Electron Beam for improved soft tissues adhesion and reduced bacterial contamination on Ti-grade 2
J. Mater. Process. Technol., 266, 518-529 (2019)DOI RIS ENW BIB - Gradients of microstructure, stresses and mechanical properties in a multi-layered diamond thin film revealed by correlative cross-sectional nano-analytics
Carbon, 144, 666-674 (2019)DOI RIS ENW BIB - Deformation behavior of designed dual-phase CuZr metallic glasses
Mater. Des., 168, ARTN 107662 (2019)DOI RIS ENW BIB - Crystallographic orientation dependent maximum layer thickness of cubic AlN in CrN/AlN multilayers
Acta Mater., 168, 190-202 (2019)DOI RIS ENW BIB - Toughness enhancement in TiN/WN superlattice thin films
Acta Mater., 172, 18-29 (2019)DOI RIS ENW BIB - The Route to Supercurrent Transparent Ferromagnetic Barriers in Superconducting Matrix
ACS Nano 2019, 13, 5655-5661 (2019)DOI RIS ENW BIB - Ultrahigh hydrogen-sorbing palladium metallic-glass nanostructures
Materials Horizons, Communication, 1481-1487 (2019)DOI RIS ENW BIB - Biomimetic hard and tough nanoceramic Ti-Al-N film with self-assembled six-level hierarchy
Nanoscale, 2019,11, 7986-7995 (2019)DOI RIS ENW BIB - Mechanism of high-pressure torsion-induced shear banding and lamellar thickness saturation in Co-Cr-Fe-Ni-Nb high-entropy composites
Journal of Materials Research, 34, 2672-2682 (2019)DOI RIS ENW BIB - Work hardening in selective laser melted Al-12Si alloy
Material Design Processing Comm, 1, 2019;e46 (2019)DOI RIS ENW BIB - Influence of directional microstructure on mechanical properties in Al-based ultrafine bimodal lamellar structured alloy
Mat Design Process Comm., 1, e52 (2019)DOI RIS ENW BIB - Encapsulation of a gradient Al2O3 layer on hierarchical structured substrate via two-step hybrid processes
Mater. Des., 167, ARTN 107616 (2019)DOI RIS ENW BIB - Controlling the distribution of structural heterogeneities in severely deformed metallic glass
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 752, 36-42 (2019)DOI RIS ENW BIB - Atomic structure evolution of high entropy metallic glass microwires at cryogenic temperature
Scr. Mater., 163, 29-33 (2019)DOI RIS ENW BIB - Lignin-based multiwall carbon nanotubes
Composites Part A, 121, 175-179 (2019)DOI RIS ENW BIB - Chemical evolution-induced strengthening on AlCoCrNi dual-phase high-entropy alloy with high specific strength
J. Alloy. Compd., 777, 828-834 (2019)DOI RIS ENW BIB - Rate limiting deformation mechanisms of bcc metals in confined volumes
Acta Mater., 166, 687-701 (2019)DOI RIS ENW BIB - Garnet-Polymer Composite Electrolytes: New Insights on Local Li-Ion Dynamics and Electrodeposition Stability with Li Metal Anodes
ACS APPLIED ENERGY MATERIALS, 2, 1734-1746 (2019)DOI RIS ENW BIB - Fast and direct determination of fragility in metallic glasses using chip calorimetry
HELIYON, 5, ARTN e01334 (2019)DOI RIS ENW BIB - Novel electrical transport properties of native Fe-Nb oxide layers leading to unilateral conductivity of a refractory metallic glass
HELIYON, 5, ARTN e01424 (2019)DOI RIS ENW BIB - Compressive and tensile bending of sputter deposited Al/Mo bilayers
Scripta Materialia, 162, 367-371 (2019)DOI RIS ENW BIB - A comparative study on the evolution of microstructure and hardness during monotonic and cyclic high pressure torsion of CoCuFeMnNi high entropy alloy
J. Mater. Res., 34, 732-743 (2019)DOI RIS ENW BIB - Structure-stress relationships in nanocrystalline multilayered Al0.7Cr0.3N/Al0.9Cr0.1N coatings studied by cross-sectional X-ray nanodiffraction
Materials and Design, 170 (2019), 107702 (2019)DOI RIS ENW BIB - Superior Wear Resitance in EBM-Processed TC4 Alloy Compared with SLM and Forged Samples
materials, 12/5, 782 (2019)DOI RIS ENW BIB - Hydrogen storage properties of TiFe-based ternary mechanical alloys with cobalt and niobium. A thermochemical approach
International Journal of Hydrogen EnergyElsevierScience Direct, 44, 11233-11240 (2019)DOI RIS ENW BIB - The influence of crystallization conditions on the macromolecular structure and strength of y-polypropylene
Thermochimica ActaElsevier, 677 (2019), 131-138 (2019)DOI RIS ENW BIB - Effect of heat treatment on microstructure and mechanical properties of 316L steel synthesized by selective laser melting
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 748, 205-212 (2019)DOI RIS ENW BIB - Tailoring bimodal grain size structures in nanocrystalline compositionally complex alloys to improve ductility
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 748, 379-385 (2019)DOI RIS ENW BIB - Oxygen-mediated deformation and grain refinement in Cu-Fe nanocrystalline alloys
Acta Materialia, 281-293 (2019)DOI RIS ENW BIB - Estimation of diffusivity from densification data obtained during spark plasma sintering
Scr. Mater., 161, 36-39 (2019)DOI RIS ENW BIB - Design of next-generation alloys for additive manufacturing
Mat. Design Process Comm., 2019;e50, 1-4 (2019)DOI RIS ENW BIB - Retardation of Fatigue Crack Growth in Rotating Bending Specimens with Semi-Elliptical Cracks
Metals, 9, ARTN 156 (2019)DOI RIS ENW BIB - Analytical and Numerical Crack Growth Analysis of 1:3 Scaled Railway Axle Specimens
Metals, 9, ARTN 184 (2019)DOI RIS ENW BIB - Benefits of pattern formation by severe plastic deformation
Applied Materials TodayElsevierScience Direct, 236-241 (2019)DOI RIS ENW BIB - Coexistence of adjacent vacancy-ordered and eutectic phases in Al-Cu-Ni alloys
Taylor & Francis, 98/2018, 486-493 (2019)DOI RIS ENW BIB - Polymorphic Transformation and Magnetic Properties of Rapidly Solidified Fe26.7Co26.7Ni26.7Si8.9B11.0 High-Entropy Alloys
Materials, 12, ARTN 590 (2019)DOI RIS ENW BIB - Co-Cr-Mo-C-B metallic glasses with wide supercooled liquid region obtained by systematic adjustment of the metalloid ratio
Journal of Non-Crystalline Solids, 310-319 (2019)DOI RIS ENW BIB - Graphene-templated synthesis of palladium nanoplates as novel electrocatalyst for direct methanol fuel cell
Applied Surface Science, 385-392 (2019)DOI RIS ENW BIB - Direct atomic identification of cation migration induced gradual cubic-to-hexagonal phase transition in Ge2Sb2Te5
COMMUNICATIONS CHEMISTRY, 2, ARTN 13 (2019)DOI RIS ENW BIB - Influence of Processing Parameters on the Mechanical Properties of HPT-deformed Nickel/ Carbon Nanotube composites
Advanced Engineering Materials, 21(1), ARTN 1800422 (2019)DOI RIS ENW BIB - Study of Cu0 Nanowire Growth on Different Copper Surfaces
Scientific Reports, 9, ARTN 37172-8 (2019)DOI RIS ENW BIB - Characterization of strain bursts in high density polyethylene by means of a novel nano creep test
International Journal of Plasticity, 116, 297-313 (2019)DOI RIS ENW BIB - Optimizing mechanical properties of Fe26.7Co26.7Ni26.7Si8.9B11 high entropy alloy by inducing hypoeutectic to quasi-duplex microstructural transition
Sci Rep, 9, ARTN 360 (2019)DOI RIS ENW BIB - Bioinspired nacre-like alumina with a bulk-metallic glass-forming alloy as a compliant phase
nature communications, 10, 961 (2019) - Electromechanical properties of cathodic arc deposited high entropy alloy thin films on polymer substrates
J. Vac. Sci. Technol. A, 37, ARTN 010601 (2019)DOI RIS ENW BIB - Localized pore evolution assisted densification during spark plasma sintering of nanocrystalline W-5wt.%Mo alloy
Scr. Mater., 159, 41-45 (2019)DOI RIS ENW BIB - Influence of cyclic loading on the structure and double-stage structure relaxation behavior of a Zr-Cu-Fe-Al metallic glass
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 742, 526-531 (2019)DOI RIS ENW BIB - Nanostructured Metallic Materials and Composites: Processes, Properties and Microstructures
Adv. Eng. Mater., 21, ARTN 1801073 (2019)DOI RIS ENW BIB - Magnetic Binary Supersaturated Solid Solutions Processed by Severe Plastic Deformation
Nanomaterials, 9, ARTN 6 (2019)DOI RIS ENW BIB - High strength nanocrystalline Cu-Co alloys with high tensile ductility
Materials Research, 34 (1), 58-68 (2019)DOI RIS ENW BIB - Anisotropy of fracture toughness in nanostructured ceramics controlled by grain boundary design
Materials and Design, 80-85 (2019)DOI RIS ENW BIB - Evolution of structure and residual stress of a fcc/hex-A1CrN multi-layered system upon thermal loading revealed by cross-sectional Xray nano-diffraction
Acta Mater., 162, 55-66 (2019)DOI RIS ENW BIB - Crack arrest in thin metallic film stacks due to material- and residual stress inhomogeneities
Thin Solid Films, 668, 14-22 (2018)DOI RIS ENW BIB - Ultrahigh-strength low carbon steel obtained from the martensitic state via high pressure torsion
Acta Materialia, 168-177 (2018)DOI RIS ENW BIB - Oxide induced crack closure in the near threshold regime: The effect of oxide debris release
Int. J. Fatigue, 117, 21-26 (2018)DOI RIS ENW BIB - Strengthening Effects in Nano-/Ultrafine-Grained Carbon Nanotube Reinforced-Titanium Composites Investigated by Finite Element Modeling
Metall. Mater. Trans. A-Phys. Metall. Mater. Sci., 49A, 6469-6478 (2018)DOI RIS ENW BIB - Nested sampling, statistical physics and the Potts model
J. Comput. Phys., 375, 368-392 (2018)DOI RIS ENW BIB - Impact of interfaces on the radiation response and underlying defect recovery mechanisms in nanostructured Cu-Fe-Ag
Mater. Des., 160, 1148-1157 (2018)DOI RIS ENW BIB - Ultrafast Giant Photostriction of Epitaxial Strontium Iridate Film with Superior Endurance
Nano Lett., 18, 7742-7748 (2018)DOI RIS ENW BIB - Mechanical, deformation and fracture behaviors of bulk metallic glass composites reinforced by spherical B2 particles
Prog. Nat. Sci., 28, 704-710 (2018)DOI RIS ENW BIB - Structure and mechanical properties of Ti-Based alloys containing Ag subjected to a thermomechanical treatment
Journal of Alloys and Compounds, 1182-1188 (2018)DOI RIS ENW BIB - Strain-rate dependent occurrence of cleavage fracture in Fe−Si−Al alloys
Materials Science and Engineering: A, 267-276 (2018)DOI RIS ENW BIB - Structure and Thermal Properties of an Al-Based Metallic Glass-Polymer Composite
Metals, 8, met8121037 (2018)DOI RIS ENW BIB - Fracture mechanics of micro samples: Fundamental considerations
Mater. Des., 159, 252-267 (2018)DOI RIS ENW BIB - Anneal hardening and elevated temperature strain rate sensitivity of nanostructured metals: Their relation to intergranular dislocation accommodation
Acta Materialia, 409-419 (2018)DOI RIS ENW BIB - Compressive and tensile bending of sputter deposited Al/Mo bilayers
Scripta Materialia, 367-271 (2018)DOI RIS ENW BIB - Removing the oxide layer in a nanostructured aluminum alloy by local shear deformation between nanoscale phases
Powder Technology, 733-737 (2018)DOI RIS ENW BIB - Sample Size and Strain-Rate-Sensitivity Effects on the Homogeneity of High-Pressure Torsion Deformed Disks
Metallurgical and Materials Transactions A, 601-608 (2018)DOI RIS ENW BIB - Mechanical properties of the magnetocaloric intermetallic LaFe11.2Si1.8 alloy at different length scales
Acta Materialia, 40-50 (2018)DOI RIS ENW BIB - Anomalous re-ordering of Fe3Al disordered by high pressure torsion deformation
Scr. Mater., 156, 90-94 (2018)DOI RIS ENW BIB - Fracture toughness evaluation of UFG tungsten foil
Int. J. Refract. Met. Hard Mat., 76, 214-225 (2018)DOI RIS ENW BIB - Deformation characteristics of ultrafine grained and nanocrystalline iron and pearlitic steel - An in situ synchrotron investigation
Acta Mater., 160, 22-33 (2018)DOI RIS ENW BIB - Structural and mechanical characterization of heterogeneities in a CuZr-based bulk metallic glass processed by high pressure torsion
Acta Mater., 160, 147-157 (2018)DOI RIS ENW BIB - Der Werkstoff des "Ötzibeiles" - Die kupferzeitliche Beilklinge der Gletschermumie aus den ÖtztalerAlpen
BHM - Berg- und Hüttenmännische Monatshefte, 1-1 (2018)DOI RIS ENW BIB - The effect of heat treatments on pure and potassium doped drawn tungsten wires: Part II - Fracture properties
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 737, 434-447 (2018)DOI RIS ENW BIB - Constituent constraining effects on the microstructural evolution, ductility, and fracture mode of crystalline/amorphous nanolaminates
J. Alloy. Compd., 768, 88-96 (2018)DOI RIS ENW BIB - Synthesis, characterization and thermodynamic stability of nanostructured ε-iron carbonitride powder prepared by a solid-state mechanochemical route
Journal of Alloys and Compounds, 327-336 (2018)DOI RIS ENW BIB - Electro-mechanical behavior of Al/Mo bilayers studied with in situ straining methods
Thin Solid Films, 665, 131-136 (2018)DOI RIS ENW BIB - On the stacking fault energy related deformation mechanism of nanocrystalline Cu and Cu alloys: A first-principles and TEM study
Journal of Alloys and Compounds, 807-818 (2018)DOI RIS ENW BIB - Sputter deposition of Mo-based multicomponent thin films from rotatable targets: Experiment and simulation
Appl. Surf. Sci., 455, 1029-1036 (2018)DOI RIS ENW BIB - Local chemical ordering within the incubation period as a trigger for nanocrystallization of a highly supercooled Ti-based liquid
Mater. Des., 156, 504-513 (2018)DOI RIS ENW BIB - Metallic glass nanolaminates with shape memory alloys
Acta Mater., 159, 344-351 (2018)DOI RIS ENW BIB - Comparative investigation of microstructure, mechanical properties and strengthening mechanisms of Al-12Si/TiB2 fabricated by selective laser melting and hot pressing
Ceram. Int., 44, 17635-17642 (2018)DOI RIS ENW BIB - Enhancing the interface bonding in carbon nanotubes reinforced Al matrix composites by the in situ formation of TiAl3 and TiC
J. Alloy. Compd., 765, 98-105 (2018)DOI RIS ENW BIB - Influence of severe straining and strain rate on the evolution of dislocation structures during micro-/nanoindentation in high entropy lamellar eutectics
Int. J. Plast., 109, 121-136 (2018)DOI RIS ENW BIB - A simple and versatile machine for creep testing at low loads (6-300 N) and on miniaturized specimens: Application to a Mg-base alloy
Rev. Sci. Instrum., 89, ARTN 105102 (2018)DOI RIS ENW BIB - Activation volume and energy of bulk metallic glasses determined by nanoindentation
Mater. Des., 155, 116-124 (2018)DOI RIS ENW BIB - Strain energy contributions on the bainitic phase transformation in a CrMoV steel during continuous cooling
Mater. Des., 155, 475-484 (2018)DOI RIS ENW BIB - Scratch induced thin film buckling for quantitative adhesion measurements
Mater. Des., 155, 203-211 (2018)DOI RIS ENW BIB - Plastic deformation mechanisms in severely strained eutectic high entropy composites explained via strain rate sensitivity and activation volume
Compos. Pt. B-Eng., 150, 7-13 (2018)DOI RIS ENW BIB - Pressure-Assisted Sintering of Al-Gd-Ni-Co Amorphous Alloy Powders
Materialia, 157-166 (2018)DOI RIS ENW BIB - Correlation between the atomic configurations and the amorphous-to-icosahedral phase transition in metallic glasses
J. Mater. Res., 33, 2775-2783 (2018)DOI RIS ENW BIB - On the microstructure control of the bendability of advanced high strength steels
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 735, 89-98 (2018)DOI RIS ENW BIB - In-situ observations of the fracture and adhesion of Cu/Nb multilayers on polyimide substrates
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 735, 456-462 (2018)DOI RIS ENW BIB - Cooperative deformation behavior between the shear band and boundary sliding of an Al-based nanostructure-dendrite composite
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 735, 81-88 (2018)DOI RIS ENW BIB - Impact of solute-solute interactions on grain boundary segregation and cohesion in molybdenum
PHYSICAL REVIEW MATERIALS, 2, ARTN 093609 (2018)DOI RIS ENW BIB - High strength nanocrystalline Cu–Co alloys with high tensile ductility
Journal of Materials Research (JMR), 1-11 (2018)DOI RIS ENW BIB - Microstructural and texture evolution of copper-(chromium, molybdenum, tungsten) composites deformed by high-pressure-torsion
Int. J. Refract. Met. Hard Mat., 75, 137-146 (2018)DOI RIS ENW BIB - Transition from thermally assisted to mechanically driven boundary migration and related apparent activation energies
Scr. Mater., 212-215 (2018)DOI RIS ENW BIB - Crack Initiation of Printed Lines Predicted with Digital Image Correlation
JOM, 70, 1805-1810 (2018)DOI RIS ENW BIB - Molecularly grafted, structurally integrated multifunctional polymer thin films with improved adhesion
Surf. Coat. Technol., 349, 963-968 (2018)DOI RIS ENW BIB - Influence of phase transformation on the damage tolerance of Ti-Al-N coatings
Vacuum, 155, 153-157 (2018)DOI RIS ENW BIB - A novel high-strength Al-based nanocomposite reinforced with Ti-based metallic glass nanoparticles produced by powder metallurgye
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 734, 34-41 (2018)DOI RIS ENW BIB - The effect of heat treatments on pure and potassium doped drawn tungsten wires: Part I - Microstructural characterization
Materials Science & Engineering A, 422-433 (2018)DOI RIS ENW BIB - Phase formation, microstructure and deformation behavior of heavily alloyed TiNb- and TiV-based titanium alloys
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 733, 80-86 (2018)DOI RIS ENW BIB - Ultrafine-grained CuAg7Zr0.05 alloy with fully recrystallized microstructure
Materialia, 162-168 (2018)DOI RIS ENW BIB - Effect of boron addition on thermal and mechanical properties of Co-Cr-Mo-C-(B) glass-forming alloys
Intermetallics, 99, 1-7 (2018)DOI RIS ENW BIB - How softwood tree branches are attached to stems: hierarchical extension of Shigo's stem-branch model
Trees-Struct. Funct., 32, 1113-1121 (2018)DOI RIS ENW BIB - Correlation between Electrical Transport and Nanoscale Strain in InAs/In0.6Ga0.4As Core-Shell Nanowires
Nano Lett., 18, 4949-4956 (2018)DOI RIS ENW BIB - Microstructure Evolution in a 6082 Aluminium Alloy during Thermomechanical Treatment
Materials, 11, ARTN 1319 (2018)DOI RIS ENW BIB - Nanoindentation study of macerals in coals from the Ukrainian Donets Basin
Advances in Geosciences (ADGEO), 73-83 (2018)DOI RIS ENW BIB - Effect of processing temperature on the microstructural characteristics of Cu-Ag nanocomposites: From supersaturation to complete phase decomposition
Acta Mater., 33-44 (2018)DOI RIS ENW BIB - Insight into the structural evolution during TiN film growth via atomic resolution TEM
J. Alloy. Compd., 754, 257-267 (2018)DOI RIS ENW BIB - In-situ TEM observation of {101¯2} twin-dominated deformation of Mg pillars: Twinning mechanism, size effects and rate dependency
Acta Materialia, 407-421 (2018)DOI RIS ENW BIB - Metal release and cell biological compatibility of beta-type Ti-40Nb containing indium
J. Biomed. Mater. Res. Part B, 106, 1686-1697 (2018)DOI RIS ENW BIB - Mechanical Behavior at the Nanoscale: What's in your Toolbox?
JOM, 70, 1065-1067 (2018)DOI RIS ENW BIB - The cyclic R-curve - Determination, problems, limitations and application
Eng. Fract. Mech., 198, 45-64 (2018)DOI RIS ENW BIB - Introduction of Planar High Pressure Torsion (P-HPT) for Fabrication of Nanostructured Sheets
Adv. Eng. Mater., 20, 1-7 (2018)DOI RIS ENW BIB - Analytische Betrachtung der Bruchmechanismen in AlSiCu-Gusslegierungen
Materialwiss. Werkstofftech., 49, 934-941 (2018)DOI RIS ENW BIB - Influence of Processing Parameters on the Mechanical Properties of HPT‐Deformed Nickel/Carbon Nanotube Composites
Advanced Engineering Materials (ADV ENG MATER), 1-9 (2018)DOI RIS ENW BIB - In-situ elastic-plastic fracture mechanics on the microscale by means of continuous dynamical testing
Mater. Des., 148, 177-187 (2018)DOI RIS ENW BIB - Universally scaling Hall-Petch-like relationship in metallic glass matrix composites
Int. J. Plast., 105, 225-238 (2018)DOI RIS ENW BIB - Microstructural Characterization of a Laser Surface Remelted Cu-Based Shape Memory Alloy
Mater. Res.-Ibero-am. J. Mater., 21, UNSP e20171044 (2018)DOI RIS ENW BIB - Microstructure and mechanical properties of hierarchical multi-phase composites based on Al-Ni-type intermetallic compounds in the Al-Ni-Cu-Si alloy system
J. Alloy. Compd., 749, 205-210 (2018)DOI RIS ENW BIB - Finishing of Ge nanomachined surfaces for X-ray crystal optics
Int. J. Adv. Manuf. Technol., 96, 3603-3617 (2018)DOI RIS ENW BIB - Ductile bulk metallic glass by controlling structural heterogeneities
Sci Rep, 8, ARTN 9174 (2018)DOI RIS ENW BIB - Dual self-organised shear banding behaviours and enhanced ductility in phase separating Zr-based bulk metallic glasses
Philos. Mag., 98, 1744-1764 (2018)DOI RIS ENW BIB - Thermal behavior, structural relaxation and magnetic study of a new Hf-microalloyed Co-based glassy alloy with high thermal stability
J. Alloy. Compd., 748, 553-560 (2018)DOI RIS ENW BIB - Multiscale analysis of nanoindentation-induced defect structures in gum metal
Acta Mater., 151, 334-346 (2018)DOI RIS ENW BIB - Understanding the effect of surface flaws on the strength distribution of brittle single crystals
Journal of the American Ceramic Society, 5705-5716 (2018)DOI RIS ENW BIB - High Temperature Flow Behavior of Ultra-Strong Nanoporous Au assessed by Spherical Nanoindentation.
Nanomaterials, 1-12 (2018)DOI RIS ENW BIB - Electrosorption of Hydrogen in Pd-Based Metallic Glass Nanofilms
ACS Applied Energy Materials, A-Q (2018)DOI RIS ENW BIB - Interfacial mutations in the Al-polyimide system
Surf. Interface Anal., 50, 579-586 (2018)DOI RIS ENW BIB - Room temperature plasticity and phase transformation of nanometer-sized transition alumina nanoparticles under pressure
Acta Mater., 150, 308-316 (2018)DOI RIS ENW BIB - Influence of Annealing on Microstructure and Mechanical Properties of a Nanocrystalline CrCoNi Medium-Entropy Alloy
Materials, 11, ARTN 662 (2018)DOI RIS ENW BIB - Lattice Correspondence and Growth Structures of Monoclinic Mg4Zn7 Phase Growing on an Icosahedral Quasicrystal
Crystals, 8, ARTN 194 (2018)DOI RIS ENW BIB - Electrodeposition of Fe-C Alloys from Citrate Baths: Structure, Mechanical Properties, and Thermal Stability
Metals, 8, ARTN 363 (2018)DOI RIS ENW BIB - Influence of Powder Characteristics on Processability of AlSi12 Alloy Fabricated by Selective Laser Melting
Materials, 1-14 (2018)DOI RIS ENW BIB - Nanoindentation creep behavior of Cu–Zr metallic glass films
Materials and Design, 221-231 (2018)DOI RIS ENW BIB - Surface structure and properties of metallic glasses
J. Alloy. Compd., 742, 512-517 (2018)DOI RIS ENW BIB - Local nanoscale strain mapping of a metallic glass during in situ testing
Appl. Phys. Lett., 112, ARTN 171905 (2018)DOI RIS ENW BIB - Nanostructured Low Carbon Steels Obtained from the Martensitic State via Severe Plastic Deformation, Precipitation, Recovery, and Recrystallization
Advanced Engineering Materials, 1-8 (2018)DOI RIS ENW BIB - Anisotropic elastic properties and phase stability of B2 and B19 CuZr structures under hydrostatic pressure
Intermetallics, 98, 60-68 (2018)DOI RIS ENW BIB - Fracture toughness of Ti-Si-N thin films
Int. J. Refract. Met. Hard Mat., 72, 78-82 (2018)DOI RIS ENW BIB - Microstructure and strength of nano-/ultrafine-grained carbon nanotube-reinforced titanium composites processed by high-pressure torsion
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 722, 122-128 (2018)DOI RIS ENW BIB - A heat treatable TiB2/A1-3.5Cu-1.5Mg-1Si composite fabricated by selective laser melting: Microstructure, heat treatment and mechanical properties
Composites Part B, 147, 162-168 (2018)DOI RIS ENW BIB - Origin of large plasticity and multiscale effects in iron-based metallic glasses
Nat. Commun., 9, 1-10 (2018)DOI RIS ENW BIB - Matching in-situ and ex-situ recorded stress gradients in an AlxGa1 − xN Heterostructure: Complementary wafer curvature analyses in time and space
Scripta Materialia, 147, 50-54 (2018)DOI RIS ENW BIB - A special purpose Trefftz-element for mode III crack tip loading
Eng. Fract. Mech., 192, 210-224 (2018)DOI RIS ENW BIB - Effect of composition on the structure of lithium- and manganese-rich transition metal oxides
Energy Environ. Sci., 11, 830-840 (2018)DOI RIS ENW BIB - Bulk metallic dual phase glasses by severe plastic deformation
Intermetallics, 94, 172-178 (2018)DOI RIS ENW BIB - Influence of silicon content on microstructure and mechanical properties of Ti-Cr-Si alloys
J. Alloy. Compd., 737, 53-57 (2018)DOI RIS ENW BIB - In situ nanobeam electron diffraction strain mapping of planar slip in stainless steel
Scr. Mater., 146, 87-90 (2018)DOI RIS ENW BIB - Gradient residual strain and stress distributions in a high pressure torsion deformed iron disk revealed by high energy X-ray diffraction
Scr. Mater., 178-181 (2018)DOI RIS ENW BIB - Thermomechanical processing of In-containing beta-type Ti-Nb alloys
J. Mech. Behav. Biomed. Mater., 79, 283-291 (2018)DOI RIS ENW BIB - Additive Manufacturing of a 316L Steel Matrix Composite Reinforced with CeO2 Particles: Process Optimization by Adjusting the Laser Scanning Speed
TECHNOLOGIES, 6, ARTN 25 (2018)DOI RIS ENW BIB - Liquid ejection temperature dependence of structure and glass transition behavior for rapidly solidified Zr-Al-M (M=Ni, Cu or Co) ternary glassy alloys
J. Alloy. Compd., 739, 1104-1114 (2018)DOI RIS ENW BIB - Microstructures, Martensitic Transformation, and Mechanical Behavior of Rapidly Solidified Ti-Ni-Hf and Ti-Ni-Si Shape Memory Alloys
J. Mater. Eng. Perform., 27, 1005-1015 (2018)DOI RIS ENW BIB - Review Article: Stress in thin films and coatings: Current status, challenges, and prospects
J. Vac. Sci. Technol. A, 36, ARTN 020801 (2018)DOI RIS ENW BIB - Cross-sectional TEM study of subsurface damage in SPDT machining of germanium optics
Appl. Optics, 57, 1940-1943 (2018)DOI RIS ENW BIB - Investigation of Color Change in Cu-Zn Alloys by Reflectivity and Color Difference Analysis
Korean J. Met. Mater., 56, 171-176 (2018)DOI RIS ENW BIB - A new device for high-temperature in situ GISAXS measurements
Rev. Sci. Instrum., 89, ARTN 035103 (2018)DOI RIS ENW BIB - Martensitic Transformation and Plastic Deformation of TiCuNiZr-Based Bulk Metallic Glass Composites
Metals, 8, ARTN 196 (2018)DOI RIS ENW BIB - Atomistic origins of the differences in anisotropic fracture behaviour of LiTaO3 and LiNbO3 single crystals
Acta Materialia, 150, 373-380 (2018)DOI RIS ENW BIB - In situ atomic-scale observation of oxidation and decomposition processes in nanocrystalline alloys
Nat. Commun., 9, ARTN 946 (2018)DOI RIS ENW BIB - An investigation on shear banding and crystallographic texture of Ag–Cu alloys deformed by high-pressure torsion
Journal of mechanical science, 1-13 (2018)DOI RIS ENW BIB - Two-stage cracking of metallic bi-layers on polymer substrates under tension
Scripta Materialia, 145, 5-8 (2018)DOI RIS ENW BIB - Novel synthesis of core-shell Au-Pt dendritic nanoparticles supported on carbon black for enhanced methanol electro-oxidation
Appl. Surf. Sci., 433, 840-846 (2018)DOI RIS ENW BIB - Essential refinements of spherical nanoindentation protocols for the reliable determination of mechanical flow curves
Materials and Design, 146, 69-80 (2018)DOI RIS ENW BIB - Effects of new beta-type Ti-40Nb implant materials, brain-derived neurotrophic factor, acetylcholine and nicotine on human mesenchymal stem cells of osteoporotic and non osteoporotic donors
PLoS One, 13, ARTN e0193468 (2018)DOI RIS ENW BIB - Verification of correlation between densification during spark plasma sintering and compressive creep of ultrafine-grained in-situ Al2O3-reinforced B2 aluminide matrix composites
J. Alloy. Compd., 735, 1921-1930 (2018)DOI RIS ENW BIB - Nanoscale residual stress depth profiling by Focused Ion Beam milling and eigenstrain analysis
Materials and Design, 55-64 (2018)DOI RIS ENW BIB - Exceptionally high nanoscale wear resistance of a Cu47Zr45Al8 metallic glass with native and artificially grown oxide
Intermetallics, 93, 312-317 (2018)DOI RIS ENW BIB - Fabrication of Al-Zn solid solution via friction stir processing
Mater. Charact., 136, 221-228 (2018)DOI RIS ENW BIB - On the reinforcement homogenization in CNT/metal matrix composites during severe plastic deformation
Mater. Charact., 375-381 (2018)DOI RIS ENW BIB - Strain Distribution Across an Individual Shear Band in Real and Simulated Metallic Glasses
Nano Letters, 18, 1221-1227 (2018)DOI RIS ENW BIB - Anisotropy in local microstructure - Does it affect the tensile properties of the SLM samples?
Manufacturing Letters, 15PA, 33-37 (2018)DOI RIS ENW BIB - Local-structure change rendered by electronic localization-delocalization transition in cerium-based metallic glasses
Phys. Rev. B, 97, ARTN 064104 (2018)DOI RIS ENW BIB - Mechanical properties of electrodeposited amorphous/crystalline multilayer structures in the Fe-P system
Materials Science & Engineering A, 715, 83-91 (2018)DOI RIS ENW BIB - Amorphous martensite in beta-Ti alloys
Nat. Commun., 9, ARTN 506 (2018)DOI RIS ENW BIB - To the design of highly fracture-resistant composites by the application of the yield stress inhomogeneity effect
Composite Structures, 185, 113-122 (2018)DOI RIS ENW BIB - Influence of solute effects on the saturation grain size and rate sensitivity in Cu-X alloys
Scripta Materialia, 144, 5-8 (2018)DOI RIS ENW BIB - Thermally-triggered Dual In-situ Self-healing Metallic Materials
Sci Rep, 8, ARTN 2120 (2018)DOI RIS ENW BIB - Cross-sectional characterization techniques as the basis for knowledge-based design of graded CVD TiN-TiB2 coatings
International Journal of Refractory Metals and Hard Materials, 280-284 (2018)DOI RIS ENW BIB - Elastostatic reversibility in thermally formed bulk metallic glasses: nanobeam diffraction fluctuation electron microscopy
Nanoscale, 10, 1081-1089 (2018)DOI RIS ENW BIB - High strength nanostructured Al-based alloys through optimized processing of rapidly quenched amorphous precursors
Scientific Reports, 8, ARTN 1090 (2018)DOI RIS ENW BIB - Precipitate strengthening and thermal stability in three component metallic nanolaminate thin films
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 485-492 (2018)DOI RIS ENW BIB - Prediction of the mechanical behaviour of pearlitic steel based on microcompression tests, micromechanical models and homogenization approaches
Eur. J. Mech. A-Solids, 67, 272-279 (2018)DOI RIS ENW BIB - Microstructure and mechanical properties of a heat-treatable Al-3.5Cu-1.5Mg-1Si alloy produced by selective laser melting
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 711, 562-570 (2018)DOI RIS ENW BIB - Crack driving forces for short cracks: The effect of work hardening
Eng. Fract. Mech., 187, 262-271 (2018)DOI RIS ENW BIB - Mechanical and Tribological Properties of Al2O3-TiC Composite Fabricated by Spark Plasma Sintering Process with Metallic (Ni, Nb) Binders
Metals, 8, ARTN 50 (2018)DOI RIS ENW BIB - Influence of Nb on the Microstructure and Fracture Toughness of (Zr0.76Fe0.24)100−xNbx Nano-Eutectic Composites
Materials, 11, ARTN 113 (2018)DOI RIS ENW BIB - On cryothermal cycling as a method for inducing structural changes in metallic glasses
NPG Asia Materials, 10, 137-145 (2018)DOI RIS ENW BIB - Influence of severe plastic deformation and specimen orientation on the fatigue crack propagation behavior of a pearlitic steel
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 710, 260-270 (2018)DOI RIS ENW BIB - Electrically reversible cracks in an intermetallic film controlled by an electric field
Nat. Commun., ARTN 41 (2018)DOI RIS ENW BIB - The effect of residual stresses and strain reversal on the fracture toughness of TiAl alloys
Materials Science & Engineering A, 709, 17-29 (2018)DOI RIS ENW BIB - Nanoindentation creep behavior of Cu–Zr metallic glass films
Materials Research Letters, 6, 22-28 (2018)DOI RIS ENW BIB - Thermodynamic instability of a nanocrystalline, single-phase TiZrNbHfTa alloy and its impact on the mechanical properties
Acta Mater., 142, 201-212 (2018)DOI RIS ENW BIB - The corrosion resistance in artificial saliva of titanium and Ti-13Nb-13Zr alloy processed by high pressure torsion
Procedia Structural Integrity, 13, 1834-1839 (2018)DOI RIS ENW BIB - Microstructural influence on the cyclic electro-mechanical behaviour of ductile films on polymer substrates
Thin Solid Films, 644, 166-172 (2017)DOI RIS ENW BIB - Influence of solid solution strengthening on the local mechanical properties of single crystal and ultrafine-grained binary Cu–AlX solid solutions
Journal of Materials Research, 32, 4583-4591 (2017)DOI RIS ENW BIB - Strain dependence of diffusion in Zr-based bulk amorphous alloy
JOURNAL OF APPLIED PHYSICS, 122, ARTN 245105 (2017)DOI RIS ENW BIB - Powder metallurgy of Al-based composites reinforced with Fe-based glassy particles: Effect of microstructural modification
Particulate Science and Technology, 1-6 (2017)DOI RIS ENW BIB - Combined TEM and XPS studies of metal - polymer interfaces for space applications
Surface and Coatings Technology, 332, 368-375 (2017)DOI RIS ENW BIB - Annealing effects on the film stress and adhesion of tungsten-titanium barrier layers
Surface and Coatings Technology, 332, 376-381 (2017)DOI RIS ENW BIB - Inkjet Printed Wiring Boards with Vertical Interconnect Access on Flexible, Fully Compostable Cellulose Substrates
Advanced Materials Technologies, 2017, ARTN 1700250 (2017)DOI RIS ENW BIB - Effect of Multiple Alloying Elements on the Glass-Forming Ability, Thermal Stability, and Crystallization Behavior of Zr-Based Alloys
Metallurgical and Materilas Transactions A (2017)DOI RIS ENW BIB - Interface and stability analysis of Tantalum- and Titanium nitride thin films onto Lithiumniobate
Appl. Surf. Sci., 425, 254-260 (2017)DOI RIS ENW BIB - Designing a multifunctional Ti-2Cu-4Ca porous biomaterial with favorable mechanical properties and high bioactivity
J. Alloy. Compd., 727, 338-345 (2017)DOI RIS ENW BIB - Influence of spherical particles and interfacial stress distribution on viscous flow behavior of Ti-Cu-Ni-Zr-Sn bulk metallic glass composites
Intermetallics, 91, 90-94 (2017)DOI RIS ENW BIB - High-throughput study of binary thin film tungsten alloys
Int. J. Refract. Met. Hard Mat., 69, 40-48 (2017)DOI RIS ENW BIB - Study of the structural defects on carbon nanotubes in metal matrix composites processed by severe plastic deformation
Carbon, 125, 156-161 (2017)DOI RIS ENW BIB - A combined experimental and theoretical investigation of the Al-Melamine reactive milling system: A mechanistic study towards AlN-based ceramics
J. Alloy. Compd., 729, 240-248 (2017)DOI RIS ENW BIB - Powder metallurgical processing of low modulus beta-type Ti-45Nb to bulk and macro-porous compacts
Powder Technol., 322, 393-401 (2017)DOI RIS ENW BIB - Phase evolution and carbon redistribution during continuous tempering of martensite studied with high resolution techniques
Mater. Des., 136, 214-222 (2017)DOI RIS ENW BIB - Optimization of the Hot Forging Processing Parameters for Powder Metallurgy Fe-Cu-C Connecting Rods Based on Finite Element Simulation
Metall. Mater. Trans. A-Phys. Metall. Mater. Sci., 48A, 6027-6037 (2017)DOI RIS ENW BIB - Cyclically induced grain growth within shear bands investigated in UFG Ni by cyclic high pressure torsion
J. Mater. Res., 32, 4317-4326 (2017)DOI RIS ENW BIB - Dependence of fracture strain on flaw size in rail switches—Experiments and theoretical modelling
Engineering Failure Analysis, 85, 50-61 (2017)DOI RIS ENW BIB - Structural modification through pressurized sub-Tg annealing of metallic glasses
Journal of Applied Physics, 122, ARTN 215106 (2017)DOI RIS ENW BIB - Fracture toughness and structural evolution in the TiAlN system upon annealing
Sci Rep, 7, ARTN 16476 (2017)DOI RIS ENW BIB - 30 nm X-ray focusing correlates oscillatory stress, texture and structural defect gradients across multilayered TiN-SiOx thin film
Acta Materialia, 862-873 (2017)DOI RIS ENW BIB - Bond length deviation in CuZr metallic glasses
Phys. Rev. B, 96, ARTN 174112, 1-8 (2017) - Tailoring the magnetic properties of nanocrystalline Cu-Co alloys prepared by high-pressure torsion and isothermal annealing
J. Alloy. Compd., 725, 744-749 (2017)DOI RIS ENW BIB - Influencing the crystallization of Fe80Nb10B10 metallic glass by ball milling
J. Alloy. Compd., 725, 227-236 (2017)DOI RIS ENW BIB - New Insights into Nanoindentation-Based Adhesion Testing
JOM, 69, 2237-2245 (2017)DOI RIS ENW BIB - Microstructure evolution and mechanical properties of carbon nanotubes reinforced Al matrix composites
Mater. Charact., 133, 122-132 (2017)DOI RIS ENW BIB - Giant thermal expansion and alpha-precipitation pathways in Ti-alloys
Nat. Commun., 8, ARTN 1429 (2017)DOI RIS ENW BIB - Wetting behavior and reactivity between liquid Gd and ZrO2 substrate
Journal of Mining and Metallurgy, Section B: Metallurgy, 53, 285-293 (2017)DOI RIS ENW BIB - Atomic-Level Processes of Shear Band Nucleation in Metallic Glasses
Physical Review Letters, 119, ARTN 195503 (2017)DOI RIS ENW BIB - Substrate-Influenced Thermo-Mechanical Fatigue of Copper Metallizations: Limits of Stoney's Equation
Materials, 10, ARTN 1287 (2017)DOI RIS ENW BIB - Structural modifications in sub-T-g annealed CuZr-based metallic glass
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 707, 245-252 (2017)DOI RIS ENW BIB - Rapid and partial crystallization to design ductile CuZr-based bulk metallic glass composites
Materials and Design, 139, 132-140 (2017)DOI RIS ENW BIB - Dominating deformation mechanisms in ultrafine-grained chromium across length scales and temperatures
Acta Materialia, 140, 176-187 (2017)DOI RIS ENW BIB - Resolving alternating stress gradients and dislocation densities across Al x Ga 1-x N multilayer structures on Si(111)
Applied Physics Letters, 111, ARTN 162103 (2017)DOI RIS ENW BIB - Transparent magnetic semiconductor with embedded metallic glass nano-granules
Materials and Design, 132, 208-214 (2017)DOI RIS ENW BIB - Fracture Mechanism of Coronal Teenage Dentin
RUSSIAN METALLURGY, 879-883 (2017)DOI RIS ENW BIB - Die Elektronik dehnen, bis sie bricht
Die Presse (2017)Webseite RIS ENW BIB - New beta-type Ti-Fe-Sn-Nb alloys with superior mechanical strength
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 705, 348-351 (2017)DOI RIS ENW BIB - Synthesis and evaluation of new radical photoinitiators bearing trialkoxysilyl groups for surface immobilization
Polymer, 129, 207-220 (2017)DOI RIS ENW BIB - Atomic origin for rejuvenation of a Zr-based metallic glass at cryogenic temperature
J. Alloy. Compd., 718, 254-259 (2017)DOI RIS ENW BIB - A correlative experimental and ab initio approach to improve the fracture behavior of Mo thin films by alloying with Cu
Appl. Phys. Lett., 111, ARTN 134101 (2017)DOI RIS ENW BIB - Wetting, reactivity, and phase formation at interfaces between Ni–Al melts and TiB2 ultrahigh temperature ceramic
Journal of the American Ceramic Society, 101, 911-918 (2017)DOI RIS ENW BIB - MnFePSi-Based Magnetocaloric Packed Bed Regenerators: Structural Details Probed by X-Ray Tomography
Chemical Engineering Science, 175, 84-90 (2017)DOI RIS ENW BIB - Friction welding of selective laser melted Ti6Al4V parts
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 704, 66-71 (2017)DOI RIS ENW BIB - Effect of the cooling rate on the mechanical properties of Ti-Ni-Cu-Zr-based crystal/glassy alloys
Materials Science & Engineering A, 704, 147-153 (2017)DOI RIS ENW BIB - Effect of temperature on the fatigue-crack growth behavior of the high-entropy alloy CrMnFeCoNi
Intermetallics, 88, 65-72 (2017)DOI RIS ENW BIB - Processing of Ti-5553 with improved mechanical properties via an in-situ heat treatment combining selective laser melting and substrate plate heating
Mater. Des., 130, 83-89 (2017)DOI RIS ENW BIB - Development of advanced high heat flux and plasma-facing materials
Nucl. Fusion, 57, ARTN 092007 (2017)DOI RIS ENW BIB - Dislocation densities and alternating strain fields in CrN/AlN nanolayers
Thin Solid Films, 638, 189-200 (2017)DOI RIS ENW BIB - Effect of Al2O3 Nanoparticles as Reinforcement on the Tensile Behavior of Al-12Si Composites
Metals, 7, 1-11 (2017)DOI RIS ENW BIB - A Polymer Route to the Design of Thermally Stable Metal Matrix Composites: Materials Selection and In-situ Processing
Research and Reports on Metals, 1:3, ARTN 1000108 (2017)RIS ENW BIB - Remarkable transitions of yield behavior and Lüders deformation in pure Cu by changing grain sizes
Scripta Materialia, 142, 88-91 (2017)DOI RIS ENW BIB - Crack path identification in a nanostructured pearlitic steel using atom probe tomography
Scripta Materialia, 142, 66-69 (2017)DOI RIS ENW BIB - Microstructure and mechanical properties of Al-Cu alloys fabricated by selective laser melting of powder mixtures
Journal of Alloys and Compounds, 735, 2263-2266 (2017)DOI RIS ENW BIB - Femtosecond laser machining for characterization of local mechanical properties of biomaterials: a case study on wood
Sci. Technol. Adv. Mater., 18, 574-583 (2017)DOI RIS ENW BIB - Dislocation Movement Induced by Molecular Relaxations in Isotactic Polypropylene
Macromolecules, 50, 6362-6368 (2017)DOI RIS ENW BIB - On nanostructured molybdenum-copper composites produced by high-pressure torsion
J. Mater. Sci., 52, 9872-9883 (2017)DOI RIS ENW BIB - Micropatterning kinetics of different glass-forming systems investigated by thermoplastic net-shaping
Scr. Mater., 137, 127-131 (2017)DOI RIS ENW BIB - Generation of extreme grain aspect ratios in severely deformed tantalum at elevated temperatures
Scr. Mater., 137, 60-63 (2017)DOI RIS ENW BIB - Tungsten fibre-reinforced composites for advanced plasma facing components
NUCLEAR MATERIALS AND ENERGY, 12, 1308-1313 (2017)DOI RIS ENW BIB - Deformation behavior of Re alloyed Mo thin films on flexible substrates: In situ fragmentation analysis supported by first-principles calculations
Sci Rep, 7, ARTN 7374 (2017)DOI RIS ENW BIB - Reordering a deformation disordered intermetallic compound by antiphase boundary movement
J. Alloy. Compd., 713, 148-155 (2017)DOI RIS ENW BIB - Impact of severe plastic deformation on microstructure and fracture toughness evolution of a duplex-steel
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 703, 173-179 (2017)DOI RIS ENW BIB - Hardening of shear band in metallic glass
Sci Rep, 7, ARTN 7076 (2017)DOI RIS ENW BIB - Verformungsinduzierte Übersätigung in unmischbaren Materialsystemen während der Hochdrucktorsionsverformung
Zeitschrift der Montanuniversität Leoben, 4-5 (2017)RIS ENW BIB - An in-situ synchrotron study on microplastic flow of electrodeposited nanocrystalline nickel
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 701, 101-110 (2017)DOI RIS ENW BIB - From powders to bulk metallic glass composites
Sci Rep, 7, ARTN 6651 (2017)DOI RIS ENW BIB - Tensile, fracture, and fatigue crack growth properties of a 3D printed maraging steel through selective laser melting
Journal of Alloys and Compounds, 725, 355-364 (2017)DOI RIS ENW BIB - In-situ tracking the structural and chemical evolution of nanostructured CuCr alloys
Acta Mater., 138, 42-51 (2017)DOI RIS ENW BIB - The effect of severe grain refinement on the damage tolerance of a superelastic NiTi shape memory alloy
J. Mech. Behav. Biomed. Mater., 71, 337-348 (2017)DOI RIS ENW BIB - Reciprocating sliding wear behavior of high-strength nanocrystalline Al84Ni7Gd6Co3 alloys
Wear, 382, 78-84 (2017)DOI RIS ENW BIB - Microstructure and abrasive wear behavior of a novel FeCrMoVC laser cladding alloy for high-performance tool steels
Wear, 382, 107-112 (2017)DOI RIS ENW BIB - Effect of Co additions on the phase formation, thermal stability, and mechanical properties of rapidly solidified Ti-Cu-based alloys
J. Mater. Res., 32, 2578-2584 (2017)DOI RIS ENW BIB - Stability of shear banding process in bulk metallic glasses and composites
J. Mater. Res., 32, 2560-2569 (2017)DOI RIS ENW BIB - Insights into the deformation behavior of the CrMnFeCoNi high-entropy alloy revealed by elevated temperature nanoindentation
J. Mater. Res., 32, 2658-2667 (2017)DOI RIS ENW BIB - Development and application of a heated in-situ SEM micro-testing device
Measurement, 110, 356-366 (2017)DOI RIS ENW BIB - Characterization of Al/Crystallized Al-Based Metallic Glass Composites Produced by Repeated Roll Bonding Process
Metals and Materials International, 23, 823-830 (2017)DOI RIS ENW BIB - Cryogenic-temperature-induced structural transformation of a metallic glass
MATERIALS RESEARCH LETTERS, 5, 284-291 (2017)DOI RIS ENW BIB - In situ TEM observation of FCC Ti formation at elevated temperatures
Scripta Materialia, 140, 9-12 (2017)DOI RIS ENW BIB - Ti-Fe-Sn-Nb hypoeutectic alloys with superb yield strength and significant strain-hardening
Scripta Materialia, 135, 59–62 (2017)DOI RIS ENW BIB - High resolution residual stress gradient characterization in W/TiN-stack on Si(100): Correlating in-plane stress and grain size distributions in W sublayer
Mater. Des., 132, 72-78 (2017)DOI RIS ENW BIB - β-type Ti-based bulk metallic glass composites with tailored structural metastability
J. Alloy. Compd., 708, 972-981 (2017)DOI RIS ENW BIB - Additive Manufacturing Processes: Selective Laser Melting, Electron Beam Melting and Binder JettingSelection Guidelines
Materials, 10, ARTN 672 (2017)DOI RIS ENW BIB - Experimental and calculation challenges of crack propagation in notches - From initiation to end of lifetime
Int. J. Fatigue, 103, 395-404 (2017)DOI RIS ENW BIB - Approximate stress intensity factor solutions for semi-elliptical cracks with large a/W and c/B under tension and bending
Theoretical and Applied Fracture Mechanics, 92, 167-177 (2017)DOI RIS ENW BIB - Corrosion properties of high-strength nanocrystalline Al84Ni7Gd6Co3 alloy produced by hot pressing of metallic glass
J. Alloy. Compd., 707, 63-67 (2017)DOI RIS ENW BIB - Effect of replacing Nb with (Mo and Zr) on glass forming ability, magnetic and mechanical properties of FeCoBSiNb bulk metallic glass
J. Alloy. Compd., 707, 78-81 (2017)DOI RIS ENW BIB - Selective laser melting of Al-Zn-Mg-Cu: Heat treatment, microstructure and mechanical properties
J. Alloy. Compd., 707, 287-290 (2017)DOI RIS ENW BIB - Formation of metastable cellular microstructures in selective laser melted alloys
J. Alloy. Compd., 707, 27-34 (2017)DOI RIS ENW BIB - Deformation Behavior of Powder Metallurgy Connecting Rod Preform During Hot Forging Based on Hot Compression and Finite Element Method Simulation
Metall. Mater. Trans. A-Phys. Metall. Mater. Sci., 48A, 2971-2978 (2017)DOI RIS ENW BIB - Mechanism of formation of fibrous eutectic Si and thermal conductivity of SiCp/Al-20Si composites solidified under high pressure
J. Alloy. Compd., 709, 329-336 (2017)DOI RIS ENW BIB - Crack driving force in twisted plywood structures
Acta Biomater., 55, 349-359 (2017)DOI RIS ENW BIB - Film thickness dependent microstructural changes of thick copper metallizations upon thermal fatigue
J. Mater. Res., 32, 2022-2034 (2017)DOI RIS ENW BIB - The bi-layered precipitate phase zeta in the Al-Ag alloy system
Acta Mater., 132, 525-537 (2017)DOI RIS ENW BIB - Simultaneous enhancement of strength and fatigue crack growth behavior of nanocrystalline steels by annealing
Scr. Mater., 139, 39-43 (2017)DOI RIS ENW BIB - Is the energy density a reliable parameter for materials synthesis by selective laser melting?
MATERIALS RESEARCH LETTERS, 5, 386-390 (2017)DOI RIS ENW BIB - Investigation of structure and thermal properties in composite materials based on metallic glasses with small addition of polytetrafluoroethylene
Journal of Alloys and Compounds, 707, 264-268 (2017)DOI RIS ENW BIB - Nucleation and thermal stability of an icosahedral nanophase during the early crystallization stage in Zr-Co-Cu-Al metallic glasses
Acta Materialia, 132, 298-306 (2017)DOI RIS ENW BIB - Thickness dependence of the electro-mechanical response of sputter deposited Mo thin films on polyimide: Insights from in situ synchrotron diffraction tensile tests
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 697, 17-23 (2017)DOI RIS ENW BIB - Effect of Si content on the microstructure and properties of Al-Si alloys fabricated using hot extrusion
Journal of Materials Research, 32, 2210-2217 (2017)DOI RIS ENW BIB - Correlative characterization on microstructure evolution of Ni-based K403 alloy during thermal exposure
Acta Mater., 131, 169-186 (2017)DOI RIS ENW BIB - Dynamic nanoindentation testing: is there an influence on a material’s hardness?
Materials Research Letters, 5, 486-493 (2017)DOI RIS ENW BIB - Single-shot full strain tensor determination with microbeam X-ray Laue diffraction and a two- dimensional energy-dispersive detector
Journal of Applied Crystallography, 50, 901-908 (2017)DOI RIS ENW BIB - Probing the dynamics of complexed local anesthetics via neutron scattering spectroscopy and DFT calculations
International Journal of Pharmaceutics, 524, 397-406 (2017)DOI RIS ENW BIB - Structural, elastic and electronic properties of CoZr in B2 and B33 structures under high pressure
J. Alloy. Compd., 705, 445-455 (2017)DOI RIS ENW BIB - Dichlorosilane-derived nano-silicon inside hollow carbon spheres as a high-performance anode for Li-ion batteries
J. Mater. Chem. A, 5, 9262-9271 (2017)DOI RIS ENW BIB - Mechanochemical synthesis of nanostructured metal nitrides, carbonitrides and carbon nitride: a combined theoretical and experimental study
Phys. Chem. Chem. Phys., 19, 12414-12424 (2017)DOI RIS ENW BIB - Revealing the Microstructural evolution in Cu-Cr nanocrystalline alloys during high pressure torsion
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 695, 350-359 (2017)DOI RIS ENW BIB - Temperature dependent structural evolution in nickel/carbon nanotube composites processed by high-pressure torsion
IOP Conference Series: Materials Science and Engineering, 194, ARTN 012019 (2017)DOI RIS ENW BIB - Microstructure and texture evolution during severe plastic deformation of CrMnFeCoNi high-entropy alloy
IOP Conf. Series: Materials Science and Engineering, 194, ARTN 012028 (2017)DOI RIS ENW BIB - Selective laser melting of ultra-high-strength TRIP steel: processing, microstructure, and properties
J. Mater. Sci., 52, 4944-4956 (2017)DOI RIS ENW BIB - On the phase evolution and dissolution process in Cu-Cr alloys deformed by high pressure torsion
Scr. Mater., 133, 41-44 (2017)DOI RIS ENW BIB - Designing a novel functional-structural NiTi/hydroxyapatite composite with enhanced mechanical properties and high bioactivity
Intermetallics, 84, 35-41 (2017)DOI RIS ENW BIB - Monotonic and cyclic mechanical reliability of metallization lines on polymer substrates
J. Mater. Res., 32, 1760-1769 (2017)DOI RIS ENW BIB - A versatile atomic force microscope integrated with a scanning electron microscope
Rev. Sci. Instrum., 88, ARTN 053704 (2017)DOI RIS ENW BIB - Optimizing disk registration algorithms for nanobeam electron diffraction strain mapping
Ultramicroscopy, 176, 170-176 (2017)DOI RIS ENW BIB - Electrochemical and biocompatibility examinations of high-pressure torsion processed titanium and Ti–13Nb–13Zr alloy
Journal of Biomedical Materials Research, Part B Applied Biomaterials, 1-11 (2017)DOI RIS ENW BIB - Explicit relationship between electrical and topological degradation of polymer-supported metal films subjected to mechanical loading
Appl. Phys. Lett., 110, ARTN 191904 (2017)DOI RIS ENW BIB - Direct Observation of Current-Induced Motion of a 3D Vortex Domain Wall in Cylindrical Nanowires
ACS Applied Materials and Interfaces, 9, 16741–16744 (2017)DOI RIS ENW BIB - The use of femtosecond laser ablation as a novel tool for rapid micro-mechanical sample preparation
MATERIALS & DESIGN, 121, 109-118 (2017)DOI RIS ENW BIB - Deformation-Induced Supersaturation in Immiscible Material Systems during High-Pressure Torsion
Advanced Engineering Materials, 19, ARTN 1600675, 1-19 (2017)DOI RIS ENW BIB - Thin film adhesion of flexible electronics influenced by interlayers
Advanced Engineering Materials, 19, 1-7 (2017)DOI RIS ENW BIB - Fracture of severely plastically deformed Ta and Nb
Int. J. Refract. Met. Hard Mat., 64, 143-150 (2017)DOI RIS ENW BIB - Fatigue crack closure: a review of the physical phenomena
Fatigue Fract. Eng. Mater. Struct., 40, 471-495 (2017)DOI RIS ENW BIB - Micro-patterning by thermoplastic forming of Ni-free Ti-based bulk metallic glasses
MATERIALS & DESIGN, 120, 204-211 (2017)DOI RIS ENW BIB - High cycle fatigue testing of thermosonic ball bonds
Microelectron. Reliab., 70, 91-98 (2017)DOI RIS ENW BIB - Microstructural Effects on the Toughness of a High Co-Ni Steel
Adv. Eng. Mater., 19, UNSP 1600633 (2017)DOI RIS ENW BIB - Extraction of Flow Behavior and Hall-Petch Parameters Using a Nanoindentation Multiple Sharp Tip Approach
Adv. Eng. Mater., 19, UNSP 1600669 (2017)DOI RIS ENW BIB - Phase Decomposition of a Single-Phase AlTiVNb High-Entropy Alloy after Severe Plastic Deformation and Annealing
Adv. Eng. Mater., 19, UNSP 1600674 (2017)DOI RIS ENW BIB - Complementary High Spatial Resolution Methods in Materials Science and Engineering
Adv. Eng. Mater., 19, UNSP 1600671 (2017)DOI RIS ENW BIB - Mechanical behavior of selective laser melted 316L stainless steel
Materials Science & Engineering A, 696, 113-121 (2017)DOI RIS ENW BIB - Magnon Mode Selective Spin Transport in Compensated Ferrimagnets
Nano Letters, 17, 3334-3340 (2017)DOI RIS ENW BIB - Electro-mechanical performance of thin gold films on polyimide
MRS ADVANCES, 1, 773-778 (2017)DOI RIS ENW BIB - Superlattice-induced oscillations of interplanar distances and strain effects in the CrN/AlN system
Phys. Rev. B, 95, ARTN 155305 (2017)DOI RIS ENW BIB - Peculiarity of self-assembled cubic nanolamellae in the TiN/AlN system: Epitaxial self-stabilization by element deficiency/excess
Acta Materialia, 131, 391-399 (2017)DOI RIS ENW BIB - Hierarchical surface patterning of Ni- and Be-free Ti- and Zr-based bulk metallic glasses by thermoplastic net-shaping
Materials Science and Engineering C, 73, 398-405 (2017)DOI RIS ENW BIB - Transient nucleation and microstructural design in flash-annealed bulk metallic glasses
Acta Mater., 127, 416-425 (2017)DOI RIS ENW BIB - Prediction of effective mode II fatigue crack growth threshold for metallic materials
Eng. Fract. Mech., 174, 117-126 (2017)DOI RIS ENW BIB - Influence of the Ag concentration on the medium-range order in a CuZrAlAg bulk metallic glass
Sci Rep, 7, ARTN 44903 (2017)DOI RIS ENW BIB - The driving force governing room temperature grain coarsening in thin gold films
Scripta Materialia, 130, 42-45 (2017)DOI RIS ENW BIB - Hysteretic behavior of soft magnetic elastomer composites
Journal of Magnetism and Magnetic Materials, 426, 60-63 (2017)DOI RIS ENW BIB - Extracting flow curves from nano-sized metal layers in thin film systems
Schripta Materialia, 130, 143-147 (2017)DOI RIS ENW BIB - Thermal stability and latent heat of Nb-rich martensitic Ti-Nb alloys
J. Alloy. Compd., 697, 300-309 (2017)DOI RIS ENW BIB - Microstructure and thermal expansion behavior of Al-50Si synthesized by selective laser melting
J. Alloy. Compd., 699, 548-553 (2017)DOI RIS ENW BIB - Fatigue crack growth anisotropy in ultrafine-grained iron
Acta Mater., 126, 154-165 (2017)DOI RIS ENW BIB - Defining the tensile properties of Al-12Si parts produced by selective laser melting
Acta Mater., 126, 25-35 (2017)DOI RIS ENW BIB - Impact of d-band filling on the dislocation properties of bcc transition metals: The case of tantalum-tungsten alloys investigated by density- functional theory
PHYSICAL REVIEW B, 95, ARTN 094114 (2017)DOI RIS ENW BIB - Nanoindentation and wear properties of Ti and Ti-TiB composite materials produced by selective laser melting
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 688, 20-26 (2017)DOI RIS ENW BIB - Selective interface toughness measurements of layered thin films
AIP Advances, 7, ARTN 035307 (2017)DOI RIS ENW BIB - Ab-initio and experimental study of phase stability of Ti-Nb alloys
Journal of Alloys and Compounds, 696, 481-489 (2017)DOI RIS ENW BIB - Rapid fabrication of function-structure-integrated NiTi alloys: Towards a combination of excellent superelasticity and favorable bioactivity
Intermetallics, 82, 1-13 (2017)DOI RIS ENW BIB - Structure of glassy Cu47.5Zr47.5Ag5 investigated with neutron diffraction with isotopic substitution, X-ray diffraction, EXAFS and reverse Monte Carlo simulation
J. Non-Cryst. Solids, 459, 99-102 (2017)DOI RIS ENW BIB - Effect of annealing on the size dependent deformation behavior of thin cobalt films on flexible substrates
Thin Solid Films, 624, 34-40 (2017)DOI RIS ENW BIB - Deformation mechanisms during severe plastic deformation of a Cu-Ag composite
J. Alloy. Compd., 695, 2285-2294 (2017)DOI RIS ENW BIB - Additive Manufacturing: Reproducibility of Metallic Parts
TECHNOLOGIES, 5, ARTN 8 (2017)DOI RIS ENW BIB - Biocompatible 3D printed magnetic micro needles
Biomedical Physics & Engineering Express, 3, ARTN 025005 (2017)DOI RIS ENW BIB - On room-temperature quasi-elastic mechanical behaviour of bulk metallic glasses
Acta Materialia, 129, 343-351 (2017)DOI RIS ENW BIB - In Situ X-Ray Synchrotron Profile Analysis During High Pressure Torsion of Ti
The Minerals, Metals & Materials Society 2017, Magnesium Technology 2017, 645-651 (2017)DOI RIS ENW BIB - Strength distribution and fracture analyses of LiNbO3and LiTaO3single crystals under biaxial loading
Journal of the European Ceramic Society, 37, 4397-4406 (2017)DOI RIS ENW BIB - Structural instabilities during cyclic loading of ultrafine-grained copper studied with micro bending experiments
Acta Materialia, 125, 351-358 (2017)DOI RIS ENW BIB - A novel setup for wafer curvature measurement at very high heating rates
Rev. Sci. Instrum., 88, ARTN 024709 (2017)DOI RIS ENW BIB - Structural anisotropy in equal-channel angular extruded nickel revealed by dilatometric study of excess volume
Int. J. Mater. Res., 108, 81-88 (2017)DOI RIS ENW BIB - Local melting to design strong and plastically deformable bulk metallic glass composites
Sci Rep, 7, ARTN 42518 (2017)DOI RIS ENW BIB - Nanoindentation testing as a powerful screening tool for assessing phase stability of nanocrystalline high-entropy alloys
MATERIALS & DESIGN, 115, 479-485 (2017)DOI RIS ENW BIB - Transmission electron microscopical study of teenage crown dentin on the nanometer scale
Mater. Sci. Eng. C-Mater. Biol. Appl., 71, 994-998 (2017)DOI RIS ENW BIB - Effect of growth conditions on interface stability and thermophysical properties of sputtered Cu films on Si with and without WTi barrier layers
Journal of Vacuum Science and Technology B: Nanotechnology and Microelectronics, 35, ARTN 022201 (2017)DOI RIS ENW BIB - Co/Au multisegmented nanowires: a 3D array of magnetostatically coupled nanopillars
Nanotechnology, 28, ARTN 095709 (7pp) (2017)DOI RIS ENW BIB - Microtexture Analysis of Restoration Mechanisms during High Pressure Torsion of Pure Nickel
Materials Science & Engineering A, 684, 101-109 (2017)DOI RIS ENW BIB - Self-Terminating Confinement Approach for Large-Area Uniform Monolayer Graphene Directly over Si/SiOX by Chemical Vapor Deposition
ACS Nano, 11, 1946-1956 (2017)DOI RIS ENW BIB - The influence of microstructure on the cyclic deformation and damage of copper and an oxide dispersion strengthened steel studied via in-situ micro-beam bending
Materials Science and Engineering A, 687, 313-322 (2017)DOI RIS ENW BIB - Effect of thermomechanical processing on the mechanical biofunctionality of a low modulus Ti-40Nb alloy
J. Mech. Behav. Biomed. Mater., 65, 137-150 (2017)DOI RIS ENW BIB - Composition optimization of low modulus and high-strength TiNb-based alloys for biomedical applications
J. Mech. Behav. Biomed. Mater., 65, 866-871 (2017)DOI RIS ENW BIB - Influence of testing orientation on mechanical properties of Ti45Nb deformed by high pressure torsion
MATERIALS & DESIGN, 114, 40-46 (2017)DOI RIS ENW BIB - Nanostructured coatings for tooling applications
International Journal of Refractory Metals and Hard Materials, 62, 219-224 (2017)DOI RIS ENW BIB - Micro-to-nano-scale deformation mechanism of a Ti-based dendritic-ultrafine eutectic alloy exhibiting large tensile ductility
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 682, 673-678 (2017)DOI RIS ENW BIB - Introduction
Journal of Materials Research, 32, 1-1 (2017)DOI RIS ENW BIB - Deformation mechanisms to ameliorate the mechanical properties of novel TRIP/TWIP Co-Cr-Mo-(Cu) ultrafine eutectic alloys
Sci Rep, 7, ARTN 39959)DOI RIS ENW BIB - Accelerated thermo-mechanical fatigue of copper metallizations studied by pulsed laser heating
Microelectronic Engineering, 167, 110-118 (2017)DOI RIS ENW BIB - Buckle induced delamination techniques to measure the adhesion of metal dielectric interfaces
Microelectron. Eng., 167, 63-68 (2017)DOI RIS ENW BIB - Influence of extreme thermal cycling on metal-polymer interfaces
Microelectron. Eng., 167, 17-22 (2017)DOI RIS ENW BIB - Formation of nanostructured metallic glass thin films upon sputtering
Heliyon, 3, ARTN 00228 (2017)DOI RIS ENW BIB - Intrinsic behaviour of mode II and mode III long fatigue cracks in zirconium and the Ti-6Al-4V alloy
Solid State Phenomena, 258, 265-268 (2017)DOI RIS ENW BIB - Microstructure, mechanical behavior, and wear properties of FeCrMoVC steel prepared by selective laser melting and casting
Scr. Mater., 126, 41-44 (2017)DOI RIS ENW BIB - Grain boundary design of thin films: Using tilted brittle interfaces for multiple crack deflection toughening
Acta Mater., 122, 130-137 (2017)DOI RIS ENW BIB - Improving strength and toughness of materials by utilizing spatial variations of the yield stress
Acta Mater., 122, 207-219 (2017)DOI RIS ENW BIB - Lifetime vs. rate capability: Understanding the role of FEC and VC in high-energy Li-ion batteries with nano-silicon anodes
Energy Storage Materials, 6, 26-35 (2017)DOI RIS ENW BIB - Granulation of Bulk Metallic Glass Forming Alloys as a Feedstock for Thermoplastic Forming and their Compaction into Bulk Samples
Materials Science Forum, 879, 589-594 (2017)DOI RIS ENW BIB - Correlative microstructure and topography informed nanoindentation of copper films
Surface & Coatings Technology, 404-413 (2016)DOI RIS ENW BIB - Thermal shock resistance of magnesia spinel refractories-Investigation with the concept of configurational forces
J. Eur. Ceram. Soc., 36, 4301-4308 (2016)DOI RIS ENW BIB - Negentropic stabilization of metastable beta-Ti in bulk metallic glass composites
Scr. Mater., 125, 19-23 (2016)DOI RIS ENW BIB - Effect of high pressure solidification on tensile properties and strengthening mechanisms of Al-20Si
J. Alloy. Compd., 688, 88-93 (2016)DOI RIS ENW BIB - Strain-induced phase transformation of a thin Co film on flexible substrates
Acta Mater., 121, 227-233 (2016)DOI RIS ENW BIB - Advanced 3D failure characterization in multi-layered PCBs
NDT E Int., 84, 99-107 (2016)DOI RIS ENW BIB - Ab initio search for cohesion-enhancing impurity elements at grain boundaries in molybdenum and tungsten
Model. Simul. Mater. Sci. Eng., 24, ARTN 085009 (2016)DOI RIS ENW BIB - Compression behavior of inter-particle regions in high-strength Al84Ni7Gd6Co3 alloy
Mater. Lett., 185, 25-28 (2016)DOI RIS ENW BIB - Substitution effect on glass formation of NixCo60-xNb40 alloys
Mater. Lett., 185, 541-544 (2016)DOI RIS ENW BIB - Effect of Alloying Elements in Melt Spun Mg-alloys for Hydrogen Storage
Mater. Res.-Ibero-am. J. Mater., 19, 20-26 (2016)DOI RIS ENW BIB - Tensile Properties of Al-12Si Fabricated via Selective Laser Melting (SLM) at Different Temperatures
Technologies, 38, 1-9 (2016)DOI RIS ENW BIB - Combinatorial refinement of thin-film microstructure, properties and process conditions: iterative nanoscale search for self-assembled TiAlN nanolamellae
JOURNAL OF APPLIED CRYSTALLOGRAPHY, 6 (2016)DOI RIS ENW BIB - Improved fracture behavior and microstructural characterization of thin tungsten foils
Nuclear Materials and Energy, 9, 181-188 (2016)DOI RIS ENW BIB - High-resolution transmission electron microscopy investigation of diffusion in metallic glass multilayer films
Materials Today AdvancesElsevierScience Direct, 1, 100004 (2016)DOI RIS ENW BIB - Effect of Particle Size on Microstructure and Mechanical Properties of Al-Based Composite Reinforced with 10 Vol.% Mechanically Alloyed Mg-7.4%Al Particles
Technologies, 4, 1-8 (2016)DOI RIS ENW BIB - Integrated experimental and computational approach for residual stress investigation near through-silicon vias
JOURNAL OF APPLIED PHYSICS, 120, 1-9 (2016)DOI RIS ENW BIB - Ab-initio search for cohesion-enhancing solute elements at grain boundaries in molybdenum and tungsten
Int. J. Refract. Met. Hard Mat., 60, 75-81 (2016)DOI RIS ENW BIB - Interfacial segregation induced by severe plastic deformation in a Mg-Zn-Y alloy
Scr. Mater., 124, 169-173 (2016)DOI RIS ENW BIB - Advanced tungsten materials for plasma-facing components of DEMO and fusion power plants
Fusion Eng. Des., 109, 1046-1052 (2016)DOI RIS ENW BIB - Crossover between superconductivity and magnetism in SrRuO3 mesocrystal embedded YBa2Cu3O7-x heterostructures
Nanoscale, 8, 18454-18460 (2016)DOI RIS ENW BIB - Microstructure and thermal conductivity of hypereutectic Al-high Si produced by casting and spray deposition
J. Mater. Res., 31, 2948-2955 (2016)DOI RIS ENW BIB - High pressure die casting of Fe-based metallic glass
Sci Rep, 6, ARTN 35258 (2016)DOI RIS ENW BIB - Compositional depth profiling of diamond-like carbon layers by glow discharge optical emission spectroscopy
J. Anal. At. Spectrom., 31, 2207-2212 (2016)DOI RIS ENW BIB - Mechanical and Corrosion Behavior of New Generation Ti-45Nb Porous Alloys Implant Dev
Technologies, 4, 1-12 (2016)DOI RIS ENW BIB - Mechanical and Corrosion Behavior of New Generation Ti-45Nb Porous Alloys Implant Dev
Technologies, 4, 1-12)DOI RIS ENW BIB - Correlation between structural heterogeneity and plastic deformation for phase separating FeCu metallic glasses
Sci Rep, 6, ARTN 34340 (2016)DOI RIS ENW BIB - Strong and Stable Nanocomposites Prepared by High-Pressure Torsion of Cu-Coated Fe Powders
METALS, 6, ARTN 228 (2016)DOI RIS ENW BIB - Mechanochemical route to the synthesis of nanostructured Aluminium nitride
Sci Rep, 6, ARTN 33375 (2016)DOI RIS ENW BIB - Hierarchically nanostructured hollow carbon nanospheres for ultra-fast and long-life energy storage
Carbon, 106, 306-313 (2016)DOI RIS ENW BIB - Influence of Ag and Co additions on glass-forming ability, thermal and mechanical properties of Cu-Zr-Al bulk metallic glasses
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 673, 90-98 (2016)DOI RIS ENW BIB - Effect of cerium addition on microstructure and mechanical properties of high-strength Fe85Cr4Mo8V2C1 cast steel
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 674, 366-374 (2016)DOI RIS ENW BIB - Formation and phase evolution of liquid phase-separated metallic glasses with double glass transition, crystallization and melting
MATERIALS TODAY COMMUNICATIONS, 8, 64-71 (2016)DOI RIS ENW BIB - Ultra-strong and damage tolerant metallic bulk materials: A lesson from nanostructured pearlitic steel wires
Sci Rep, 6, ARTN 33228 (2016)DOI RIS ENW BIB - Interface dominated mechanical properties of ultra-fine grained and nanoporous Au at elevated temperatures
Acta Materialia, 121, 104-116 (2016)DOI RIS ENW BIB - Alloying Behavior of Self-Assembled Noble Metal Nanoparticles
Chem.-Eur. J., 22, 13446-+ (2016)DOI RIS ENW BIB - Microstructure and mechanical properties of the near-beta titanium alloy Ti-5553 processed by selective laser melting
MATERIALS & DESIGN, 105, 75-80 (2016)DOI RIS ENW BIB - Influence of ejection temperature on structure and glass transition behavior for Zr-based rapidly quenched disordered alloys
Acta Mater., 116, 370-381 (2016)DOI RIS ENW BIB - The effect of size on the strength of FCC metals at elevated temperatures: annealed copper
Philosophical Magazine, 3379-3395 (2016)RIS ENW BIB - Effect of Cu and Gd on Structural and Magnetic Properties of Fe-Co-B-Si-Nb Metallic Glasses
Solid State Phenomena, 254, 60-64)DOI RIS ENW BIB - Local and transient nanoscale strain mapping during in situ deformation
Appl. Phys. Lett., 109, ARTN 081906 (2016)DOI RIS ENW BIB - Ideal shear banding in metallic glass
Philos. Mag., 96, 3159-3176 (2016)DOI RIS ENW BIB - Fracture toughness enhancement of brittle nanostructured materials by spatial heterogeneity: A micromechanical proof for CrN/Cr and TiN/SiOx multilayers
MATERIALS & DESIGN, 104, 227-234 (2016)DOI RIS ENW BIB - The effect of single overloads in tension and compression on the fatigue crack propagation behaviour of short cracks
Int. J. Fatigue, 89, 77-86 (2016)DOI RIS ENW BIB - Progress in understanding of intrinsic resistance to shear-mode fatigue crack growth in metallic materials
Int. J. Fatigue, 89, 36-42 (2016)DOI RIS ENW BIB - Ductilisation of tungsten (W) through cold-rolling: R-curve behaviour
Int. J. Refract. Met. Hard Mat., 58, 22-33 (2016)DOI RIS ENW BIB - Simultaneous enhancements of strength and toughness in an Al-12Si alloy synthesized using selective laser melting
Acta Mater., 115, 285-294 (2016)DOI RIS ENW BIB - On the process of co-deformation and phase dissolution in a hard-soft immiscible Cu-Co alloy system during high-pressure torsion deformation
Acta Mater., 115, 333-346 (2016)DOI RIS ENW BIB - Synthesis and Mechanical Characterisation of an Ultra-Fine Grained Ti-Mg Composite
Materials, 9, 688 (2016)DOI RIS ENW BIB - A comparative study on the isochronal and isothermal crystallization kinetics of Co46.45Fe25.55Ta8B20 soft magnetic metallic glass with high thermal stability
J. Alloy. Compd., 675, 223-230 (2016)DOI RIS ENW BIB - Interplay between sample size and grain size: Single crystalline vs. ultrafine-grained chromium micropillars
Materials Science and Engineering: A, 674, 626-633 (2016)DOI RIS ENW BIB - Structural evolution and strength change of a metallic glass at different temperatures
Sci Rep, 6, ARTN 30876 (2016)DOI RIS ENW BIB - Advanced characterisation of thermo-mechanical fatigue mechanisms of different copper film systems for wafer metallizations
Thin Solid Films, 612, 153-164 (2016)DOI RIS ENW BIB - Interplay of the Open Circuit Potential-Relaxation and the Dissolution Behavior of a Single H-2 Bubble Generated at a Pt Microelectrode
J. Phys. Chem. C, 120, 15137-15146 (2016)DOI RIS ENW BIB - Layered-to-Tunnel Structure Transformation and Oxygen Redox Chemistry in LiRhO2 upon Li Extraction and Insertion
Inorg. Chem., 55, 7079-7089 (2016)DOI RIS ENW BIB - Brittle-to-Ductile Transition in Metallic Glass Nanowires
Nano Lett., 16, 4467-4471 (2016)DOI RIS ENW BIB - High-Performance Small-Amount Fe2O3-Doped (K,Na) NbO3-Based Lead-Free Piezoceramics with Irregular Phase Evolution
J. Am. Ceram. Soc., 99, 2341-2346 (2016)DOI RIS ENW BIB - Direct measurement of vacancy relaxation by dilatometry
Appl. Phys. Lett., 109, ARTN 021906 (2016)DOI RIS ENW BIB - High-Performance Small-Amount Fe2O3-Doped (K,Na)NbO3-Based Lead-Free Piezoceramics with Irregular Phase Evolution
Journal of the American Ceramic Society, 99, 2341-2346 (2016)DOI RIS ENW BIB - Analysis of the thermal and temporal stability of Ta and Ti thin films onto SAW–substrate materials (LiNbO3 and LiTaO3) using AR-XPS
Surface and Interface Analysis, 48, 570-574 (2016)DOI RIS ENW BIB - Transformation-mediated plasticity in CuZr based metallic glass composites: A quantitative mechanistic understanding.
Int. J. Plast., 85, 34-51 (2016)DOI RIS ENW BIB - The mechanics of tessellations - bioinspired strategies for fracture resistance
Chem. Soc. Rev., 45, 252-267 (2016)DOI RIS ENW BIB - Electromigration in Gold Films on Flexible Polyimide Substrates as a Self-healing Mechanism
MATERIALS RESEARCH LETTERS, 4, 43-47 (2016)DOI RIS ENW BIB - Ion milling-induced micrometer-sized heterogeneities and partial crystallization in a TiZrCuFeBe bulk metallic glass
Intermetallics, 73, 5-11 (2016)DOI RIS ENW BIB - Microstructure study of a severely plastically deformed Mg-Zn-Y alloy by application of low angle annular dark field diffraction contrast imaging
Sci. Technol. Adv. Mater., 17, 115-127 (2016)DOI RIS ENW BIB - Effect of Microstructure on the Electro-Mechanical Behaviour of Cu Films on Polyimide
JOM, 68, 1640-1646 (2016)DOI RIS ENW BIB - Enhanced polysulphide redox reaction using a RuO2 nanoparticle-decorated mesoporous carbon as functional separator coating for advanced lithium-sulphur batteries
Chem. Commun., 52, 8134-8137 (2016)DOI RIS ENW BIB - High Area Capacity Lithium-Sulfur Full-cell Battery with Prelitiathed Silicon Nanowire-Carbon Anodes for Long Cycling Stability
Sci Rep, 6, ARTN 27982 (2016)DOI RIS ENW BIB - Synergistically Enhanced Polysulfide Chemisorption Using a Flexible Hybrid Separator with N and S Dual-Doped Mesoporous Carbon Coating for Advanced Lithium-Sulfur Batteries
ACS Appl. Mater. Interfaces, 8, 14586-14595 (2016)DOI RIS ENW BIB - Tailoring the Bain strain of martensitic transformations in Ti-Nb alloys by controlling the Nb content
Int. J. Plast., 85, 190-202 (2016)DOI RIS ENW BIB - The importance of fracture toughness in ultrafine and nanocrystalline bulk materials
MATERIALS RESEARCH LETTERS, 4, 127-136 (2016)DOI RIS ENW BIB - Towards the Better: Intrinsic Property Amelioration in Bulk Metallic Glasses
Sci Rep, 6, ARTN 27271 (2016)DOI RIS ENW BIB - Cross-sectional stress distribution in AlxGa1-xN heterostructure on Si(111) substrate characterized by ion beam layer removal method and precession electron diffraction
, 106, 476-481)DOI RIS ENW BIB - Mapping of residual strains around a shear band in bulk metallic glass by nanobeam X-ray diffraction
Acta Mater., 111, 187-193 (2016)DOI RIS ENW BIB - Electrochemical deposition of hydroxyapatite on beta-Ti-40Nb
Surf. Coat. Technol., 294, 186-193 (2016)DOI RIS ENW BIB - Local microstructure evolution at shear bands in metallic glasses with nanoscale phase separation
Sci Rep, 6, ARTN 25832 (2016)DOI RIS ENW BIB - Damage tolerance of railway axles - The issue of transferability revisited
Int. J. Fatigue, 86, 52-57 (2016)DOI RIS ENW BIB - FIB-induced dislocations in Al submicron pillars: Annihilation by thermal annealing and effects on deformation behavior
Acta Materialia, 110, 283-294 (2016)DOI RIS ENW BIB - Processing, microstructure and mechanical properties of Al-based metal matrix composites reinforced with mechanically alloyed particles
J. Mater. Res., 31, 1229-1236 (2016)DOI RIS ENW BIB - Thermal oxidation behavior of glass-forming Ti-Zr-(Nb)-Si alloys
J. Mater. Res., 31, 1264-1274 (2016)DOI RIS ENW BIB - Deformation in the γ-Mg17Al12 phase at 25–278 °C
Acta Materialia, 113, 221-229 (2016)DOI RIS ENW BIB - Giant heterogeneous magnetostriction in Fe-Ga alloys: Effect of trace element doping
Acta Mater., 109, 177-186 (2016)DOI RIS ENW BIB - The electro-mechanical behavior of sputter-deposited Mo thin films on flexible substrates
Thin Solid Films, 606, 45-50 (2016)DOI RIS ENW BIB - Relationship between mechanical damage and electrical degradation in polymer-supported metal films subjected to cyclic loading
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 662, 157-161 (2016)DOI RIS ENW BIB - Orientation of FePt nanoparticles on top of a-SiO2/Si(001), MgO(001) and sapphire(0001): effect of thermal treatments and influence of substrate and particle size
Beilstein J. Nanotechnol., 7, 591-604 (2016)DOI RIS ENW BIB - Orientation of FePt nanoparticles on top of a-SiO2/Si(001), MgO(001) and sapphire(0001): effect of thermal treatments and influence of substrate and particle size
Beilstein J. Nanotechnol., 591–604 (2016)DOI RIS ENW BIB - Glass-forming ability, thermal stability of B2 CuZr phase, and crystallization kinetics for rapidly solidified Cu-Zr-Zn alloys
J. Alloy. Compd., 664, 99-108 (2016)DOI RIS ENW BIB - High temperature mechanical properties of WC-Co hard metals
Int. J. Refract. Met. Hard Mat., 56, 139-144 (2016)DOI RIS ENW BIB - Laser surface remelting of a Cu-Al-Ni-Mn shape memory alloy
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 661, 61-67 (2016)DOI RIS ENW BIB - Al-rich cubic Al0.8Ti0.2N coating with self-organized nano-lamellar microstructure: Thermal and mechanical properties
Surf. Coat. Technol., 271, 89-93 (2016)DOI RIS ENW BIB - Real Hydrostatic Pressure in High-Pressure Torsion Measured by Bismuth Phase Transformations and FEM Simulations
Mater. Trans., 57, 533-538 (2016)DOI RIS ENW BIB - Influence of processing parameters on the fabrication of a Cu-Al-Ni-Mn shape-memory alloy by selective laser melting
Additive Manufacturing, 11, 23-31 (2016)DOI RIS ENW BIB - Improving the glass-forming ability and plasticity of a TiCu-based bulk metallic glass composite by minor additions of Si
J. Alloy. Compd., 663, 531-539 (2016)DOI RIS ENW BIB - A study of the micro- and nanoscale deformation behavior of individual austenitic dendrites in a FeCrMoVC cast alloy using micro- and nanoindentation experiments
Appl. Phys. Lett., 108, ARTN 143103 (2016)DOI RIS ENW BIB - Reconfiguration of lithium sulphur batteries: "Enhancement of Li-S cell performance by employing a highly porous conductive separator coating"
J. Power Sources, 309, 76-81 (2016)DOI RIS ENW BIB - About the fatigue crack propagation threshold of metals as a design criterion - A review
Eng. Fract. Mech., 153, 190-243 (2016)DOI RIS ENW BIB - Structure-property relationships in nanoporous metallic glasses
Acta Mater., 106, 199-207 (2016)DOI RIS ENW BIB - Manipulation of free volumes in a metallic glass through Xe-ion irradiation
Acta Mater., 106, 66-77 (2016)DOI RIS ENW BIB - Anisotropic deformation characteristics of an ultrafine- and nanolamellar pearlitic steel
Acta Mater., 106, 239-248 (2016)DOI RIS ENW BIB - Low Young's modulus Ti-based porous bulk glassy alloy without cytotoxic elements
Acta Biomaterialia, 36, 232-331 (2016)DOI RIS ENW BIB - Anodically fabricated TiO2–SnO2 nanotubes and their application in lithium ion batteries
Journal of Materials Chemisty A, 4, 5542-5552 (2016)DOI RIS ENW BIB - Ab initio calculations of grain boundaries in bcc metals
Model. Simul. Mater. Sci. Eng., 24, ARTN 035013 (2016)DOI RIS ENW BIB - In-situ Quasi-Instantaneous e-beam Driven Catalyst-Free Formation Of Crystalline Aluminum Borate Nanowires
Sci Rep, 6, ARTN 22524 (2016)DOI RIS ENW BIB - Improvement of fatigue life by compliant and soft interlayers
Scr. Mater., 113, 1-5 (2016)DOI RIS ENW BIB - Wettability and work of adhesion of liquid sulfur on carbon materials for electrical energy storage applications
Carbon, 98, 702-707 (2016)DOI RIS ENW BIB - Electro-Mechanical Testing of Conductive Materials Used in Flexible Electronics
FRONTIERS IN MATERIALS, 3, UNSP 11 (2016)DOI RIS ENW BIB - Kinetic analysis of the non-isothermal crystallization process, magnetic and mechanical properties of FeCoBSiNb and FeCoBSiNbCu bulk metallic glasses
J. Appl. Phys., 119, ARTN 073908 (2016)DOI RIS ENW BIB - Review on manufacture by selective laser melting and properties of titanium based materials for biomedical applications
Materials Technology, 31, 66-76 (2016)DOI RIS ENW BIB - Shear avalanches in plastic deformation of a metallic glass composite
Int. J. Plast., 77, 141-155 (2016)DOI RIS ENW BIB - Overload effect revisited - Investigation by use of configurational forces
Int. J. Fatigue, 83, 161-173 (2016)DOI RIS ENW BIB - Preparation of cast-iron-based nanocrystalline alloy with Cu and Nb addition
Intermetallics, 69, 54-61 (2016)DOI RIS ENW BIB - Atomic structure and thermal behavior of (Co-0.65,Fe-0.35)(72)Ta8B20 metallic glass with excellent soft magnetic properties
Intermetallics, 69, 21-27 (2016)DOI RIS ENW BIB - Interfacial interactions between liquid Ti-Al alloys and TiB2 ceramic
J. Mater. Sci., 51, 1779-1787 (2016)DOI RIS ENW BIB - Exceptional damage-tolerance of a medium-entropy alloy CrCoNi at cryogenic temperatures
Nat. Commun., 7, ARTN 10602 (2016)DOI RIS ENW BIB - Tungsten as a Chemically-Stable Electrode Material on Ga-Containing Piezoelectric Substrates Langasite and Catangasite for High-Temperature SAW Devices
Materials, 9, UNSP 101 (2016)DOI RIS ENW BIB - Ti/Al Multi-Layered Sheets: Accumulative Roll Bonding (Part A)
METALS, 6, UNSP 30 (2016)DOI RIS ENW BIB - Ti/Al Multi-Layered Sheets: Differential Speed Rolling (Part B)
METALS, 6, UNSP 31 (2016)DOI RIS ENW BIB - Microstructure and phase formation in Al-20Si-5Fe-3Cu-1Mg synthesized by selective laser melting
J. Alloy. Compd., 657, 430-435 (2016)DOI RIS ENW BIB - Microstructure and metallic ion release of pure titanium and Ti-13Nb-13Zr alloy processed by high pressure torsion
Mater. Des., 91, 340-347 (2016)DOI RIS ENW BIB - Reentrant spin-glass behavior and bipolar exchange-bias effect in "Sn" substituted cobalt-orthotitanate
J. Appl. Phys., 119, ARTN 043901 (2016)DOI RIS ENW BIB - Effect of substrate material on the growth and field emission characteristics of large-area carbon nanotube forests
J. Appl. Phys., 119, ARTN 044302 (2016)DOI RIS ENW BIB - Miniaturized fracture experiments to determine the toughness of individual films in a multilayer system
Extreme Mechanics letters, 8, 235-244 (2016)DOI RIS ENW BIB - The effect of bending loading conditions on the reliability of inkjet printed and evaporated silver metallization on polymer substrates
Microelectron. Reliab., 56, 109-113 (2016)DOI RIS ENW BIB - Improved cycling stability of lithium-sulfur batteries using a polypropylene-supported nitrogen-doped mesoporous carbon hybrid separator as polysulfide adsorbent
J. Power Sources, 303, 317-324 (2016)DOI RIS ENW BIB - Microstructural evolution and strength variability in microwires
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 652, 239-249 (2016)DOI RIS ENW BIB - High resolution determination of local residual stress gradients in single- and multilayer thin film systems
Acta Materialia, 103, 616-623 (2016)DOI RIS ENW BIB - Processing of Al-12Si-TNM composites by selective laser melting and evaluation of compressive and wear properties
J. Mater. Res., 31, 55-65 (2016)DOI RIS ENW BIB - Localized crystallization in shear bands of a metallic glass
Sci Rep, 6, ARTN 19358 (2016)DOI RIS ENW BIB - Two-phase quasi-equilibrium in β-type Ti-based bulk metallic glass composites
Scientific Reports, 6, 1-10 (2016)DOI RIS ENW BIB - Microstructure and properties of FeCrMoVC tool steel produced by selective laser melting
Mater. Des., 89, 335-341 (2016)DOI RIS ENW BIB - Deformation and fracture characteristics of ultrafine-grained vanadium
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 650, 492-496 (2016)DOI RIS ENW BIB - Structure and properties of sputter deposited crystalline and amorphous Cu-Ti films
Thin Solid Films, 598, 184-188 (2016)DOI RIS ENW BIB - Cross-sectional structure-property relationship in a graded nanocrystalline Ti1−xAlxN thin film
Acta Materialia, 102, 212-219 (2016)DOI RIS ENW BIB - Magnetic compensation, field-dependent magnetization reversal, and complex magnetic ordering in Co2TiO4
Phys. Rev. B, 92, ARTN 214434 (2015)DOI RIS ENW BIB - High-Temperature Characterization of Silicon Dioxide Films with Wafer Curvature
JOM, 67, 2902-2907 (2015)DOI RIS ENW BIB - Thermally Activated Deformation Behavior of ufg-Au: Environmental Issues During Long-Term and High-Temperature Nanoindentation Testing
JOM, 67, 2934-2944 (2015)DOI RIS ENW BIB - Microstructure characterization of Al-Cr-Fe quasicrystals sintered using spark plasma sintering
Mater. Charact., 110, 264-271 (2015)DOI RIS ENW BIB - Hybrid nanostructured aluminum alloy with super-high strength
NPG Asia Mater., 7, ARTN e229 (2015)DOI RIS ENW BIB - Size Effects on Strength in the Transition from Single-to-Polycrystalline Behavior
Metall. Mater. Trans. A-Phys. Metall. Mater. Sci., 46A, 5671-5684 (2015)DOI RIS ENW BIB - Deformation-Induced Martensitic Transformation in Cu-Zr-Zn Bulk Metallic Glass Composites
METALS, 5, 2134-2147 (2015)DOI RIS ENW BIB - Deformation Behavior and Microstructural Evolution of Cu-Ag Alloys Processed by High-Pressure Torsion
Adv. Eng. Mater., 17, 1828-1834 (2015)DOI RIS ENW BIB - Dynamic nanoindentation testing for studying thermally activated processes from single to nanocrystalline metals
CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE, 340-353 (2015)DOI RIS ENW BIB - In Situ Observations of Free-Standing Graphene-like Mono- and Bilayer ZnO Membranes
ACS Nano, 9, 11408-11413 (2015)DOI RIS ENW BIB - Imprinting bulk amorphous alloy at room temperature
Sci Rep, 5, ARTN 16540 (2015)DOI RIS ENW BIB - Residual stress within nanoscale metallic multilayer systems during thermal cycling
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 648, 289-298 (2015)DOI RIS ENW BIB - Adhesion energy of printed circuit board materials using four-point-bending validated with finite element simulations
Microelectronics Reliability, 2382-2390 (2015)DOI RIS ENW BIB - In-Situ Measurements of Free-standing, Ultra-thin Film Cracking in Bending
Experimental Mechanics, 55, 1681-1690 (2015)DOI RIS ENW BIB - Modeling of Fatigue Crack Growth: Dislocation Models
Reference Module in Materials Science and Materials Engineering (2015)DOI RIS ENW BIB - Effects of microstructure and crystallography on crack path and intrinsic resistance to shear-mode fatigue crack growth. Fracture and Structural Integrity
Fracture and Structural Integrity, 142-149 (2015)DOI RIS ENW BIB - Ab initio studies on the adsorption and implantation of Al and Fe to nitride materials
J. Appl. Phys., 118, ARTN 125306 (2015)DOI RIS ENW BIB - Precipitation behavior of an ultra-fine grained Mg-Zn alloy processed by high-pressure torsion
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 644, 386-391 (2015)DOI RIS ENW BIB - Simulation of high pressure torsion tests of pearlitic steel
J. Mater. Process. Technol., 223, 337-343 (2015)DOI RIS ENW BIB - Thermally activated deformation processes in body-centered cubic Cr - How microstructure influences strain-rate sensitivity
Scr. Mater., 106, 42-45 (2015)DOI RIS ENW BIB - Nanocrystalline steel obtained by mechanical alloying of iron and graphite subsequently compacted by high-pressure torsion
Acta Mater., 97, 207-215 (2015)DOI RIS ENW BIB - Mechanical properties, microstructure and thermal stability of a nanocrystalline CoCrFeMnNi high-entropy alloy after severe plastic deformation
Acta Mater., 96, 258-268 (2015)DOI RIS ENW BIB - Thickness effect on the fracture and delamination of titanium films
Thin Solid Films, 589, 209-214 (2015)DOI RIS ENW BIB - Influence of inclined twin boundaries on the deformation behavior of Cu micropillars
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 642, 65-70 (2015)DOI RIS ENW BIB - Revisiting fatigue crack growth in various grain size regimes of Ni
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 646, 294-305 (2015)DOI RIS ENW BIB - Thermal expansion of rock-salt cubic AIN
APPLIED PHYSICS LETTERS, 071602 (2015)DOI RIS ENW BIB - In Situ TEM Microcompression of Single and Bicrystalline Samples: Insights and Limitations
JOM, 67, 1704-1712 (2015)DOI RIS ENW BIB - Carbon distribution in multi-phase gamma-TiAl based alloys and its influence on mechanical properties and phase formation
Acta Mater., 94, 205-213 (2015)DOI RIS ENW BIB - On the reversibility of dislocation slip during small scale low cycle fatigue
Acta Mater., 94, 69-77 (2015)DOI RIS ENW BIB - Corrosion Fatigue of Austenitic Stianless Steel in Different Hot Chloride Solutions
Corrosion Science and Technology, 14, 172-176 (2015)DOI RIS ENW BIB - Mechanical property enhancement in laminates through control of morphology and crystal orientation
J. Phys. D-Appl. Phys., 48, ARTN 295303 (2015)DOI RIS ENW BIB - Analysis of fatigue crack propagation under mixed mode II plus III in ARMCO iron
Int. J. Fatigue, 76, 47-52 (2015)DOI RIS ENW BIB - Microstructural evolution and grain refinement in an intermetallic titanium aluminide alloy with a high molybdenum content
Int. J. Mater. Res., 106, 725-731 (2015)DOI RIS ENW BIB - Nitrogen atom shift and the structural change in chromium nitride
Acta Mater., 98, 119-127 (2015)DOI RIS ENW BIB - Adhesion measurement of a buried Cr interlayer on polyimide
Philos. Mag., 95, 1982-1991 (2015)DOI RIS ENW BIB - Microstructure-dependent deformation behaviour of bcc-metals - indentation size effect and strain rate sensitivity
Philos. Mag., 95, 1766-1779 (2015)DOI RIS ENW BIB - Microstructure-controlled depth gradients of mechanical properties in thin nanocrystalline films: Towards structure-property gradient functionalization
J. Appl. Phys., 117, ARTN 235301 (2015)DOI RIS ENW BIB - The peculiarity of the metal-ceramic interface
Sci Rep, 5, ARTN 11460 (2015)DOI RIS ENW BIB - Improved electro-mechanical performance of gold films on polyimide without adhesion layers
Scr. Mater., 102, 23-26 (2015)DOI RIS ENW BIB - Production of Bulk Metallic Glasses by Severe Plastic Deformation
METALS, 5, 720-729 (2015)DOI RIS ENW BIB - Propagation of Long Fatigue Cracks under Remote Modes II and III in Ferritic-Pearlitic Steel
Acta Phys. Pol. A, 128, 611-614 (2015)RIS ENW BIB - Interface fracture and chemistry of a tungsten-based metallization on borophosphosilicate glass
Philosophical Magazine, 1-15 (2015)DOI RIS ENW BIB - Mechanical and chemical investigation of the interface between tungsten-based metallizations and annealed borophosphosilicate glass
Thin Solid Films, 583, 170-176 (2015)DOI RIS ENW BIB - Downscaling metal-dielectric interface fracture experiments to sub-micron dimensions: A feasibility study using TEM
Surf. Coat. Technol., 270, 1-7 (2015)DOI RIS ENW BIB - Small scale mechanical testing of irradiated materials
JOURNAL OF MATERIALS RESEARCH, 30, 1231-1245 (2015)DOI RIS ENW BIB - Microstructure and mechanical properties of CuxNb1-x alloys prepared by ball milling and high pressure torsion compacting
Journal of Alloys and Compounds, 117-125 (2015)DOI RIS ENW BIB - The influence of a brittle Cr interlayer on the deformation behavior of thin Cu films on flexible substrates: Experiment and model
Acta Mater., 89, 278-289 (2015)DOI RIS ENW BIB - Resolving depth evolution of microstructure and hardness in sputtered CrN film
Thin Solid Films, 581, 75-79 (2015)DOI RIS ENW BIB - Following crack path selection in multifilm structures with weak and strong interfaces by in situ 4-point-bending
J. Mater. Res., 30, 1090-1097 (2015)DOI RIS ENW BIB - Ab initio description of segregation and cohesion of grain boundaries in W-25 at.% Re alloys
Acta Mater., 88, 180-189 (2015)DOI RIS ENW BIB - Correlative characterization of primary Al-3(Sc,Zr) phase in an Al-Zn-Mg based alloy
Mater. Charact., 102, 62-70 (2015)DOI RIS ENW BIB - Controllable synthesis of palladium nanocubes/reduced graphene oxide composites and their enhanced electrocatalytic performance
J. Power Sources, 280, 422-429 (2015)DOI RIS ENW BIB - Internal and external stresses: In situ TEM compression of Cu bicrystals containing a twin boundary
Scr. Mater., 100, 94-97 (2015)DOI RIS ENW BIB - Measuring electro-mechanical properties of thin films on polymer substrates
Microelectron. Eng., 137, 96-100 (2015)DOI RIS ENW BIB - Fracture and fracture toughness of nanopolycrystalline metals produced by severe plastic deformation
Philos. Trans. R. Soc. A-Math. Phys. Eng. Sci., 373, ARTN 20140366 (2015)DOI RIS ENW BIB - Physically appropriate characterization of fatigue crack propagation rate in elastic-plastic materials using the -integral concept
Int. J. Fract., 192, 25-45 (2015)DOI RIS ENW BIB - Microstructural thermal stability of CNT-reinforced composites processed by severe plastic deformation
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 626, 122-127 (2015)DOI RIS ENW BIB - Incremental high pressure torsion as a novel severe plastic deformation process: Processing features and application to copper
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 626, 80-85 (2015)DOI RIS ENW BIB - X-ray nanodiffraction reveals stress distribution across an indented multilayered CrN-Cr thin film
Acta Materialia, 24-31 (2015)DOI RIS ENW BIB - Elevated temperature mechanical properties of novel ultra-fine grained Cu-Nb composites
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 625, 296-302 (2015)DOI RIS ENW BIB - Fabrication and thermo-mechanical behavior of ultra-fine porous copper
Journal of Materials Science, 634-643 (2015)DOI RIS ENW BIB - Cyclic bending experiments on free-standing Cu micron lines observed by electron backscatter diffraction
Acta Mater., 83, 460-469 (2015)DOI RIS ENW BIB - Modified Kitagawa-Takahashi diagram accounting for finite notch depths
Int. J. Fatigue, 70, 503-509 (2015)DOI RIS ENW BIB - Increasing the strength of nanocrystalline steels by annealing: Is segregation necessary?
Scr. Mater., 95, 27-30 (2015)DOI RIS ENW BIB - Copper diffusion into single-crystalline TiN studied by transmission electron microscopy and atom probe tomography
Thin Solid Films, 574, 103-109 (2015)DOI RIS ENW BIB - Influence of metastable retained austenite on macro and micromechanical properties of steel processed by the Q&P process
Journal of Alloys and Compounds, 163-168 (2014)DOI RIS ENW BIB - Effect of a single soft interlayer on the crack driving force
Engineering Fracture Mechanics, 21-41 (2014)DOI RIS ENW BIB - A combinatorial X-ray sub-micron diffraction study of microstructure, residual stress and phase stability in TiAlN coatings
Surface & Coatings Technology, 108-113 (2014)DOI RIS ENW BIB - Eine Legierung aus fünf Metallen
, 1 (2014)RIS ENW BIB - On problems with the determination of the fracture resistance for materials with spatial variations of the Young’s modulus
International Journal of Fracture, 23-38 (2014)RIS ENW BIB - Leobener Forscher finden neue Kältelegierung
, 1 (2014)Download RIS ENW BIB - Legierung mit einem hohen Potenzial
, 1 (2014)Download RIS ENW BIB - Neue Legierung wird bei tiefen Temperaturen zäher statt spröder
, 1 (2014)Download RIS ENW BIB - Innovatives Legierungskonzept mit außergewöhnlichen Eigenschaften
, 1 (2014)Download RIS ENW BIB - Neue Legierung auch für Tieftemperatur
, 1 (2014)Download RIS ENW BIB - A new basis for the application of the J -integral for cyclically loaded cracks in elastic–plastic materials
International Journal of Fracture, 77-101 (2014)DOI RIS ENW BIB - Transmission electron microscope investigations on Cu-Ag alloys produced by high-pressure torsion
Materials Science and Engineering, 1-9 (2014)DOI RIS ENW BIB - Deformation behavior of Cu-compoties processed by HPT
Materials Science and Engineering, 1-9 (2014)DOI RIS ENW BIB - Microstructural evolution in immiscible alloys processed by High-Pressure Torsion
Materials Science and Engineering, 1-8 (2014)DOI RIS ENW BIB - Microcantilever bending experiments in NiAl – Evaluation, size effects, and crack tip plasticity
Journal of Materials Research, 2129-2140 (2014)Download RIS ENW BIB - Experimental and Theoretical Confirmation of the Scaling Exponent 2 in Pyramidal Load Displacement Data for Depth Sensing Indentation
Scanning, 526-529 (2014)Download RIS ENW BIB - A fracture-resistant high-entropy alloy for cryogenic applications
Science, 1153-1158 (2014)DOI RIS ENW BIB - 3D Morphology of Fracture Surfaces Created by Mixed-mode II+III Fatigue Loading in Metallic Materials
Procedia Engineering, 74-77 (2014)DOI RIS ENW BIB - Intrinsic and extrinsic size effects in the deformation of amorphous CuZr/nanocrystalline Cu nanolaminates
Acta Materialia, 94-106 (2014)Download RIS ENW BIB - Direct evidence for grain boundary motion as the dominant restoration mechanism in the steady-state regime of extremely cold-rolled copper
Acta Materialia, 401-410 (2014)DOI RIS ENW BIB - Superior oxidation resistance, mechanical properties and residual stresses of an Al-rich nanolamellar Ti<sub>0.05</sub>Al<sub>0.95</sub>N coating prepared by CVD
Surface & Coatings Technology, 1119-1127 (2014)DOI RIS ENW BIB - Evolution of residual stress and damage in coated hard metal milling inserts over the complete tool life
International Journal of Refractory Metals and Hard Materials, 80-85 (2014)DOI RIS ENW BIB - Tungsten (W) Laminate Pipes for Innovative High Temperature Energy Conversion Systems
Advanced Engineering Materials, 1-11 (2014)DOI RIS ENW BIB - Rail grade dependent damage behaviour – Characteristics and damage formation hypothesis
Wear, 44-50 (2014)DOI RIS ENW BIB - Critical assessment of the determination of residual stress profiles in thin films by means of the ion beam layer removal method
Thin Solid Films, 321-330 (2014)DOI RIS ENW BIB - New insights into single-grain mechanical behavior from temperature-dependent 3-D coherent X-ray diffraction
Acta Materialia, 46-55 (2014)DOI RIS ENW BIB - Core polarity of screw dislocations in Fe–Co alloys
Philosophical Magazine Letters, 334-341 (2014)DOI RIS ENW BIB - Influence of heat treatment on the microstructural evolution of Al–3 wt.% Cu during high-pressure torsion
Philosophical Magazine Letters, 342-350 (2014)DOI RIS ENW BIB - Microstructural evolution of a focused ion beam fabricated Mg nanopillar at high temperatures: Defect annihilation and sublimation
Scripta Materialia, 44-47 (2014)DOI RIS ENW BIB - Mono-textured nanocrystalline thin films with pronounced stress-gradients: On the role of grain boundaries in the stress evolution
Journal of Applied Physics, 203507-1-9 (2014)DOI RIS ENW BIB - Impurity effects on the nucleation and growth of primary Al3(Sc,Zr) phase in Al alloys
Journal of Materials Science, 5961-5977 (2014)DOI RIS ENW BIB - Structure and properties of a nanoscaled composition modulated metallic glass
Journal of Materials Science, 5640-5645 (2014)DOI RIS ENW BIB - New insights on the formation of supersaturated solid solutions in the Cu–Cr system deformed by high-pressure torsion
Acta Materialia, 301-313 (2014)DOI RIS ENW BIB - A novel laboratory test rig for probing the sensitivity of rail steels to RCF and wear – first experimental results
Wear, 101-108 (2014)RIS ENW BIB - Megan Cordill Finds "Piece" in Quilting
JOM, 540-541 (2014)DOI RIS ENW BIB - Fracture and R-curve behavior of an intermetallic b-stabilized TiAl alloy with different nearly lamellar microstructures
Intermetallics, 1-9 (2014)DOI RIS ENW BIB - Differences in deformation behavior of bicrystalline Cu micropillars containing a twin boundary or a large-angle grain boundary
Acta Materialia, 240-250 (2014)DOI RIS ENW BIB - Enhanced toughness and stable crack propagation in a novel tungsten fibre-reinforced tungsten composite produced by chemical vapour infiltration
Physica Scripta, 1-7 (2014)DOI RIS ENW BIB - Electrical Resistance Decrease Due to Grain Coarsening Under Cyclic Deformation
JOM, 598-601 (2014)DOI RIS ENW BIB - Die Versagensmechanismen pressgehärteter und hochfester Stähle im Dreipunkt-Biegeversuch
BHM, 122-129 (2014)DOI RIS ENW BIB - Near-threshold behaviour of shear-mode fatigue cracks in metallic materials
Fatigue & Fracture of Engineering Materials & Structures, 232-254 (2014)DOI RIS ENW BIB - Growth mechanism of Al2Cu precipitates during in situ TEM heating of a HPT deformed Al–3wt.%Cu alloy
Journal of Alloys and Compounds, 43-50 (2014)RIS ENW BIB - Grain boundary excess volume and defect annealing of copper after high-pressure torsion
Acta Materialia, 189-195 (2014)RIS ENW BIB - The Strengthening Effect of Phase Boundaries in a Severely Plastically Deformed Ti-Al Composite Wire
Metals, 37-54 (2014)Download RIS ENW BIB - Damage evolution during cyclic tension-tension loading of micron-sized Cu lines
Acta Materialia, 297-307 (2014)RIS ENW BIB - Improvements of strength and fracture resistance by spatial material property variations
Acta Materialia, 279-294 (2014)RIS ENW BIB - Modified NASGRO equation for physically short cracks
International Journal of Fatigue, 200-207 (2014)RIS ENW BIB - Macroscopic Fracture Behaviour of CrN Hard Coatings Evaluated by X-Ray Diffraction Coupled with Four-Point Bending
Materials Science Forum, 272-279 (2014)RIS ENW BIB - Depth-resolved residual stress analysis with high-energy synchrotron X-rays using a conical slit cell
Materials Science Forum, 72-75 (2014)RIS ENW BIB - Evolution of the ω<sub>o</sub> phase in a β-stabilized multi-phase TiAl alloy and its effect on hardness
Acta Materialia, 241-252 (2014)RIS ENW BIB - Supersaturation in Ag–Ni alloy by two-step high-pressure torsion processing
Philosophical Magazine Letters, 9-17 (2014)RIS ENW BIB - Recovery of electrical resistance in copper films on polyethylene terephthalate subjected to a tensile strain
Thin Solid Films, 141-145 (2014)RIS ENW BIB - Electrical Resistance of Metal Films on Polymer Substrates Under Tension
Experimental Techniques, 1-8 (2014)DOI RIS ENW BIB - Multicomponent materials from machining chips compacted by equal-channel angular pressing
Journal of Materials Science, 1193-1204 (2014)Download RIS ENW BIB - A new view on J-integrals in elastic–plastic materials
International Journal of Fracture, 77-107 (2014)RIS ENW BIB - Reversible cyclic deformation mechanism of gold nanowires by twinning–detwinning transition evidenced from in situ TEM
nature communications, 5:3033, 1-10 (2014)RIS ENW BIB - Radial crystalline texture in a lyocell fibre revealed by synchrotron nanofocus wide-angle X-ray scattering
Cellulose, 1-7 (2013)RIS ENW BIB - Fracture resistance of aluminum multilayer composites
Engineering Fracture Mechanics, 489-500 (2013)RIS ENW BIB - Fragmentation testing for ductile thin films on polymer substrates
Philosophical Magazine Letters, 618-624 (2013)RIS ENW BIB - Percolating porosity in ultrafine grained copper processed by High Pressure Torsion
Journal of Applied Physics, 183509-1 - 183509-10 (2013)RIS ENW BIB - Current oscillations in the layer-by-layer electrochemical deposition of vertically aligned nanosheets of zinc hydroxide nitrate
Journal of the Electrochemical Society, D558-D564 (2013)RIS ENW BIB - Origins of microstructure and stress gradients in nanocrystalline thin films: The role of growth parameters and self-organization
Acta Materialia, 6255-6266 (2013)RIS ENW BIB - Cross-sectional X-ray nanobeam diffraction analysis of a compositionally graded CrNx thin film
Thin Solid Films, 1-4 (2013)RIS ENW BIB - Reinhard Pippan träumt vom festen Stoff
, 1 (2013)Download RIS ENW BIB - Drei neue Erc-grants
, 1 (2013)Download RIS ENW BIB - About application of three dimensional analyses of fracture surfaces in fracture study on nanostructured titanium
Computational Materials Science, 72-79 (2013)RIS ENW BIB - An in-situ high-energy X-ray diffraction study on the hot-deformation behavior of a b-phase containing TiAl alloy
Intermetallics, 25-33 (2013)RIS ENW BIB - Three-dimensional morphology of fracture surfaces generated by modes II and III fatigue loading in ferrite and austenite
Engineering Fracture Mechanics, 285-293 (2013)RIS ENW BIB - ERC Advanced Grants an mehrere österreichische Wissenschaftler vergeben
, 1 (2013)Download RIS ENW BIB - Self-organized periodic soft-hard nanolamellae in polycrystalline TiAlN thin films
Thin Solid Films, 545, 29-32 (2013)RIS ENW BIB - EU-Spitzenforschungspreis an Leobener Physiker
, 1 (2013)Download RIS ENW BIB - Leobener Physiker Reinhard Pippan erhält EU-Spitzenforschungspreis
, 1 (2013)Download RIS ENW BIB - EU-Spitzenforschungspreis an Physiker Reinhard Pippan
, 1 (2013)Download RIS ENW BIB - Transmission electron microscopy charaterization of CrN films on MgO(001)
Thin Solid Films, 154-160 (2013)RIS ENW BIB - Influence of morphology and structural size on the fracture behavior of a nanostructured pearlitic steel
Materials Science & Engineering A, 190-196 (2013)RIS ENW BIB - United in Our Differences: Changing the Face of MSE
JOM, 828 (2013)RIS ENW BIB - X-ray analysis of residual stress gradients in TiN coatings by a Laplace space approach and crosssectional nanodiffraction: a critical comparison
Journal of Applied Crystallography, 46, 1-8 (2013)RIS ENW BIB - Elastoplastic buckling as source of misinterpretation of micropillar tests
Acta Materialia, 4996-5007 (2013)RIS ENW BIB - Development of a New Testing Procedure for Performing Tensile Tests on Specimens with Sub-Millimetre Dimensions
Journal of Testing and Evaluation, 1-12 (2013)RIS ENW BIB - The Effect of High Pressure Torsion on Structural Refinement and Mechanical Properties of an Austenitic Stainless Steel
Journal of Nanoscience and Nanotechnology, 3246-3249 (2013)RIS ENW BIB - Near-threshold propagation of mode II and mode III fatigue cracks in ferrite and austenite
Acta Materialia, 4625-4635 (2013)RIS ENW BIB - Microcompression and cyclic deformation behaviors of coaxial copper bicrystals with a single twin boundary
Scripta Materialia, 199-202 (2013)RIS ENW BIB - Brief summary of the progress on the EFDA tungsten materials
Journal of Nuclear Materials, 442, 173-180 (2013)RIS ENW BIB - Diffusive and massive phase transformations in TieAleNb alloys - Modelling and experiments
Intermetallics, 126-138 (2013)RIS ENW BIB - Generation of metallic nanocomposites by severe plastic deformation
International Materials Reviews, 41-62 (2013)RIS ENW BIB - Paper multilayer with a fracture toughness of steel
Journal of Materials Science, 48, 5180-5187 (2013)RIS ENW BIB - Recent progress in R&D on tungsten alloys for divertor structural and plasma facing materials
Journal of Nuclear Materials, 442, 181-189 (2013)RIS ENW BIB - Effects of structure and interfaces on fracture toughness of CrN/AlN multilayer coatings
Scripta Materialia, 917-920 (2013)RIS ENW BIB - Detailed modelling of delamination buckling of thin films under global tension
Acta Materialia, 2425-2433 (2013)RIS ENW BIB - Fracture of ECAP-deformed iron and the role of extrinsic toughening mechanisms
Acta Materialia, 2973-2983 (2013)RIS ENW BIB - An elevated temperature study of a Ti adhesion layer on polyimide
Thin Solid Films, 354-361 (2013)RIS ENW BIB - A study into the crack propagation resistance of pure tungsten
Engineering Fracture Mechanics, 76-85 (2013)RIS ENW BIB - Influence of grain shape and orientation on the mechanical properties of high pressure torsion deformed nickel
Materials Science & Engineering A, 224-231 (2013)RIS ENW BIB - Recent progress in research on tungsten materials for nuclear fusion applications in Europe
Journal of Nuclear Materials, 432, 482-500 (2013)RIS ENW BIB - Fatigue crack closure: From LCF to small scale yielding
International Journal of Fatigue, 41-48 (2013)RIS ENW BIB - Insights into the atomic and electronic structure triggered by ordered nitrogen vacancies in CrN
Physical Review B, 014104-1-9 (2013)RIS ENW BIB - Formation of nanostructure and abnormal annealing behavior of a Cu–Ag–Zr alloy processed by high-pressure torsion
Materials Science & Engineering A, 184-194 (2013)RIS ENW BIB - Influence of AlN layers on mechanical properties and thermal stability of Cr-based nitride coatings
Thin Solid Films, 113-118 (2013)RIS ENW BIB - Micro-Compression Test of Thixoformed Austenite
Solid State Phenomena, 215-218 (2013)RIS ENW BIB - Influence of bulk pre-straining on the size effect in nickel compression pillars
Materials Science & Engineering A, 147-158 (2013)RIS ENW BIB - Determining the fracture resistance of thin sheet fiber composites – Paper as a model material
Composites Science and Technology, 74, 43-51 (2013)RIS ENW BIB - Nanodiffraction at MINAXS (P03) beamline of PETRA III
Journal of Physics, 072021-4 (2013)RIS ENW BIB - Microstructure and vacancy-type defects of high-pressure torsion deformed Al-3 wt%Cu alloy
Journal of Applied Physics, 103506-1-7 (2012)RIS ENW BIB - Microstructure and thermostability of a W–Cu nanocomposite produced via high-pressure torsion
Philosophical Magazine, 4151-4166 (2012)RIS ENW BIB - Application of small-scale testing for investigation of ion-beam-irradiated materials
Journal of Materials Research, 2724-2736 (2012)RIS ENW BIB - TiO2(100)/Al2O3(0001) interface: A first-principles study supported by experiment
Physical Review B, 205309-1-13 (2012)RIS ENW BIB - Strength, Hardening, and Failure Observed by In Situ TEM Tensile Testing
Advanced Engineering Materials, 960-967 (2012)RIS ENW BIB - Cyclic Deformation Behavior of a 316L Austenitic Stainless Steel Processed by High Pressure Torsion
Advanced Engineering Materials, 948-954 (2012)RIS ENW BIB - Influence of residual stresses and grain size on the spinodal decomposition of metastable Ti1−xAlxN coatings
Surface & Coatings Technology, 190-196 (2012)RIS ENW BIB - Technical Note Verification of a continuum mechanical explanation of plasticity-induced crack closure under plain strain conditions by means of finite element analysis
Engineering Fracture Mechanics, 762-765 (2012)RIS ENW BIB - X-ray nanodiffraction reveals strain and microstructure evolution in nanocrystalline thin films
Scripta Materialia, 748-751 (2012)RIS ENW BIB - A novel approach for determining fracture toughness of hard coatings on the micrometer scale
Scripta Materialia, 708-711 (2012)RIS ENW BIB - Issues to consider using nano indentation on shallow ion beam irradiated materials
Journal of Nuclear Materials, 136-139 (2012)RIS ENW BIB - Sample Preparation by Metallography and Focused Ion Beam for Nanomechanical Testing
Practical Metallography, 343-355 (2012)RIS ENW BIB - Novel temperature dependent tensile test of freestanding copper thin film structures
Review of Scientific Instruments, 1-10 (2012)RIS ENW BIB - Robust mechanical performance of chromium-coated polyethylene terephthalate over a broad range of conditions
Philosophical Magazine, 3346-3362 (2012)RIS ENW BIB - On the limits of the interfacial yield model for fragmentation testing of brittle films on polymer substrates
Philosophical Magazine, 3363-3380 (2012)RIS ENW BIB - Yield stress influenced by the ratio of wire diameter to grain size – a competition between the effects of specimen microstructure and dimension in micro-sized polycrystalline copper wires
Philosophical Magazine, 3243-3256 (2012)RIS ENW BIB - Investigation of reversible plasticity in a micron-sized, single crystalline copper bending beam by X-ray μLaue diffraction
Philosophical Magazine, 3231-3242 (2012)RIS ENW BIB - EDITORIAL: Nanomechanical testing in materials research and development III
Philosophical Magazine, 3125-3127 (2012)RIS ENW BIB - All-cellulose composites prepared from flax and lyocell fibres compared to epoxy–matrix composites
Composites Science and Technology, 1304-1309 (2012)RIS ENW BIB - In Situ Study of γ-TiAl Lamellae Formation in Supersaturated α<sub>2</sub>-Ti<sub>3</sub>Al Grains
Advanced Engineering Materials, 299-303 (2012)RIS ENW BIB - Characterization of the fracture toughness of micro-sized tungsten single crystal notched specimens
Philosophical Magazine, 1803-1825 (2012)RIS ENW BIB - Influence of interrupted quenching on artificial aging of Al-Mg-Si alloys
Acta Materialia, 4496-4505 (2012)RIS ENW BIB - Thermal behavior of Nickel deformed to ultra-high strain by high pressure torsion
Materials Sciene Forum, 387-392 (2012)RIS ENW BIB - Frequency Dependence of the Coercivity of Soft Magnetic Materials
IEEE Transactions on Magnetics, 1473-1476 (2012)RIS ENW BIB - Yield and plastic flow of soft metals in small volumes loaded in tension and flexure
Philosophical Magazine, 3199-3215 (2012)RIS ENW BIB - Advanced nanomechanics in the TEM: effects of thermal annealing on FIB prepared Cu samples
Philosophical Magazine, 3269-3289 (2012)RIS ENW BIB - Local symmetry breaking of a thin crystal structure of β-Si<sub>3</sub>N<sub>4</sub> as revealed by spherical aberration corrected high-resolution transmission electron microscopy images
Journal of Electron Microscopy, 145-157 (2012)RIS ENW BIB - Quantum mechanically guided design of Co43Fe20Ta5.5X31.5 (X = B, Si, P, S) metallic glasses
Journal of Physics Condensed Mater, 175402(9pp) (2012)RIS ENW BIB - Crystal orientation changes: A comparison between a crystal plasticity finite element study and experimental results
Acta Materialia, 2379-2386 (2012)RIS ENW BIB - Kinetics and driving forces of abnormal grain growth in thin Cu films
Acta Materialia, 2397-2406 (2012)RIS ENW BIB - Lateral gradients of phases, residual stress and hardness in a laser heated Ti0.52Al0.48N coating on hard metal
Surface & Coatings Technology, 4502-4510 (2012)RIS ENW BIB - Evaluation of mechanical behavior of nano-grained 2024 Al alloy during high pressure torsion (HPT) process at various temperatures
Materials Science and Engineering A, 73-81 (2012)RIS ENW BIB - Extrinsic and intrinsic fracture behavior of high pressure torsion deformed nickel
Scripta Materialia, 507-510 (2012)RIS ENW BIB - Modeling microbending of thin films through discrete dislocation dynamics, continuum dislocation theory, and gradient plasticity
Journal of Materials Research, 612-618 (2012)RIS ENW BIB - Direct Experimental Determination of Grain Boundary Excess Volume in Metals
Physical Review Letters, 055504-1-055504-5 (2012)RIS ENW BIB - Numerical Simulation of Crack Growth in Polyethylene Composites by Means of the Cohesive Zone Model
Macromolecular Symposia, 311, 1-8 (2012)RIS ENW BIB - A comprehensive study on the damage tolerance of ultrafine-grained copper
Materials Science and Engineering A, 89-96 (2012)RIS ENW BIB - The structure and mechanical properties of spines from the cactus opuntia ficus-indica
BioResources, 1232-1237 (2012)RIS ENW BIB - On configurational forces at boundaries in fracture mechanics
International Journal of Fracture, 174, 61-74 (2012)RIS ENW BIB - Effect of grain size in compression deformation on the microstructural evolution of an austenitic stainless steel
Materials Science and Engineering A, 55-62 (2012)RIS ENW BIB - Ultrafine grain structure evolution in AA6085 aluminium alloy processed by HPT at increased temperature
Materials Science Forum, 1864-1869 (2012)RIS ENW BIB - Crack growth rates and corrosion fatigue of austenitic stainless steels in high chloride solutions
Key Engineering Materials, 97-100 (2012)RIS ENW BIB - Free volumes in bulk nanocrystalline metals studied by the complementary techniques of positron annihilation and dilatometry
Physica B, 2670-2675 (2012)RIS ENW BIB - A two-dimensional waveguide beam for X-ray nanodiffraction
Journal of Applied Crystallography, 85-92 (2012)RIS ENW BIB - Schlüsseltechnologie der Zukunft
Thema "Das Forschungsmagazin der ÖAW", 38-39 (2012)RIS ENW BIB - Bis ins kleinste Atom
Thema "Das Forschungsmagazin der ÖAW", 40-41 (2012)RIS ENW BIB - Ein Tiefseeschwamm zum Zähne-Ausbeißen
Thema "Das Forschungsmagazin der ÖAW", 42-43 (2012)RIS ENW BIB - Vom High-Tech-Implantat bis zur Bio-Schraube
Thema "Das Forschungsmagazin der ÖAW", 44-45 (2012)RIS ENW BIB - Elektronik für die Westentasche
Thema "Das Forschungsmagazin der ÖAW", 46-47 (2012)RIS ENW BIB - Defects in Al-3 wt%Cu after high-pressure torsion studied by two-dimensional Doppler broadening spectroscopy
Physics Procedia, 10-15 (2012)RIS ENW BIB - Tuning the flow of light in seminconductor-based photonic crystals by magnetic fields
Photonic and Nanostructures - Fundamentals and Applications, 60-68 (2012)RIS ENW BIB - Nanoindentation of polymers
Meccanica, 707-718 (2012)RIS ENW BIB - The formation of supersaturated solid solutions in Fe-Cu alloys deformed by high-pressure torsion
Acta Materialia, 860-871 (2012)RIS ENW BIB - Expected and unexpected plastic behavior at the micron scale: An in situ µLaue tensile study
Acta Materialia, 1252-1258 (2012)RIS ENW BIB - Dislocation-core symmetry and slip planes in tungsten alloys: A initio calculations and microcantilever bending experiments
Acta Materialia, 749-758 (2012)RIS ENW BIB - Semi-analytical approaches to assess the crack driving force in periodically heterogeneous elastic materials
International Journal of Fracture, 173, 57-70 (2012)RIS ENW BIB - Self-assembling (nano-)wrinkling topography formation in low-temperature vacuum deposition on soft polymer surfaces
Thin Solid Films, 2833-2840 (2012)RIS ENW BIB - Observation of the critical thickness phenomenon in dislocation dynamics simulation of microbeam bending
Acta Materialia, 1603-1609 (2012)RIS ENW BIB - Grain resolved orientation changes and texture evolution in a thermally strained Al film on Si substrate
Surface and Coatings Technology, 1850-1854 (2011)RIS ENW BIB - 40 Jahre Erich-Schmid-Institut für Materialwissenschaft der ÖAW
, 1 (2011)Download RIS ENW BIB - High-Tech Schmiede: Erich-Schmid-Institut für Materialwissenschaft wird 40 Jahre
, 1 (2011)RIS ENW BIB - Tiefe Einblicke in die Strukturen Kleine Zeitung Uni, Ausgabe 30
Kleine Zeitung Uni, 2 (2011)RIS ENW BIB - Thickness Effects on the Fracture of Chromium Films on Polyethylene Terephthalate
Berg- und Hüttenmännische Monatshefte (BHM), 434-437 (2011)RIS ENW BIB - Ab initio molecular dynamics model for density, elastic properties and short range order of Co–Fe–Ta–B metallic glass thin films
Journal of Physics: Condensed Matter, 475401-475408 (2011)RIS ENW BIB - Mit der Technik der Tausendfüßler
, 34-35 (2011)RIS ENW BIB - Bioinspired Design Criteria for Damage-Resistant Materials with Periodically Varying Microstructure
Advanced Functional Materials, 21, 3634-3641 (2011)RIS ENW BIB - Enhancement of strength and stability of nanostructured Ni by small amounts of solutes
Scripta Materialia, 481-484 (2011)RIS ENW BIB - Electrical properties of ZnO nanorods studied by conductive atomic force mircoscopy
Journal of Applied Physics, 052005-1-7 (2011)RIS ENW BIB - Atomic and electronic structures of a transition layer at the CrN/Cr interface
Journal of Applied Physics, 043524-1-4 (2011)RIS ENW BIB - Influence of impurities and deformation temperature on the saturation microstructure and ductility of HPT-deformed nickel
Acta Materialia, 7228-7240 (2011)RIS ENW BIB - The effect of temperature and strain rate on the periodic cracking of amorphous AlxOy films on Cu
Surface & Coatings Technology, 1855-1859 (2011)RIS ENW BIB - Interface failure and adhesion measured by focused ion beam cutting of metal–polymer interfaces
Philosophical Magazine Letters, 530-536 (2011)RIS ENW BIB - Probing the Strain Hardening Response of Small Wear Volumes with Nanoindentation
Metallurgical and Materials Transactions A, 2226-2232 (2011)RIS ENW BIB - In Situ High Temperature X-Ray Diffraction Reveals Residual Stress Depth-Profiles in Blasted TiN Hard Coatings
Advanced Engineering Materials, 705-711 (2011)RIS ENW BIB - Size effect of thermal expansion and thermal/intrinsic stresses in nanostructured thin films: Experiment and model
Acta Materialia, 6631-6645 (2011)RIS ENW BIB - The effect of film thickness variations in periodic cracking: Analysis and experiments
Surface & Coatings Technology, 1830-1836 (2011)RIS ENW BIB - Influence of impurities on the fracture behavior of tungsten
Philosophical Magazine, 3006-3020 (2011)RIS ENW BIB - In situ nanocompression testing of irradiated copper
Nature Materials, 10, 608-613 (2011)RIS ENW BIB - In Situ µLaue: Instrumental Setup for the Deformation of Micron Sized Samples
Advanced Engineering Materials, 837-844 (2011)RIS ENW BIB - Kiener Daniel "In situ nanocompression testing of irradiated copper" in Nature Materials
, 1 (2011)RIS ENW BIB - Source Truncation and Exhaustion: Insights from Quantitative in situ TEM Tensile Testing
Nano Letters, 3816-3820 (2011)RIS ENW BIB - Decomposition pathways in age hardening of Ti-Al-N films
Journal of Applied Physics, 023515-1-023515-10 (2011)RIS ENW BIB - The Power of Nuclear: Testing Irradiated Materials on the Nanoscale
, 1 (2011)Webseite RIS ENW BIB - Effects of thermal annealing on the microstructure of sputtered Al2O3 coatings
Journal of Vacuum Science Technology A, 041506-1-8 (2011)RIS ENW BIB - Cellulose nanofibrils as filler for adhesives: effect on specific fracture energy of solid wood-adhesive bonds
Cellulose, 1227-1237 (2011)RIS ENW BIB - Wie sich Kupfer unter Bestrahlung verformt
, 1 (2011)RIS ENW BIB - Effect of oxide particles on the stabilization and final microstructure in aluminium
Materials Science and Engineering A, 7589-7595 (2011)RIS ENW BIB - Leobener Forscher verbessert Prüfung von Reaktorwerkstoffen
, 2 (2011)RIS ENW BIB - Leobener Forscher verbessert Prüfung von Reaktorwerkstoffen
, 1 (2011)Download RIS ENW BIB - Impact of instrumental constraints and imperfections on the dislocation structure in micron-sized Cu compression pillars
Acta Materialia, 5618-5626 (2011)RIS ENW BIB - Significance of temperature increase in processing by high-pressure torsion
Materials Science and Engineering A, 7301-7305 (2011)RIS ENW BIB - A micro-level strain analysis of a high-strength dual-phase steel
International Journal of Materials Research (formerly Z. Metallkd.), 102, 687-691 (2011)RIS ENW BIB - Microstructure and adhesion of as-deposited and annealed Cu/Ti films on polyimide
International Journal of Materials Research (formerly Z. Metallkd.), 729-734 (2011)RIS ENW BIB - Microstructure evolution and mechanical properties of an intermetallic Ti-43.5Al-4Nb-1Mo-0.1B alloy after ageing below the eutectoid temperature
International Journal of Materials Research (formerly Z. Metallkd.), 703-708 (2011)RIS ENW BIB - Time-dependent contact behavior between diamond and a CNT turf
Nanotechnology, 295702 (7pp) (2011)RIS ENW BIB - Dislocation plasticity of Al film on polyimide investigated by cross-sectional in situ transmission electron microscopy straining
Scripta Materialia, 456-459 (2011)RIS ENW BIB - A methodology to study crystal plasticity inside a compression test sample based on image correlation and EBSD
Materials Characterization, 793-800 (2011)RIS ENW BIB - Fracture behaviour of tungsten-vanadium and tungsten-tantalum alloys and composites
Journal of Nuclear Materials, 166-176 (2011)RIS ENW BIB - A Mechanical Method for Preparing TEM Samples from Brittle Films on Compliant Substrates
Praktische Metallographie, 408-413 (2011)RIS ENW BIB - Effect of forming conditions on the softening behavior in coarse grained structures
Materials Science and Engineering A, 6163-6172 (2011)RIS ENW BIB - Towards predictive modeling of near-edge structures in electron energy-loss spectra of AIN-based ternary alloys
Physical Review B, 165122(1-10) (2011)RIS ENW BIB - Recrystallization and Grain Growth in Ultrafine-Grained Materials Produced by High Pressure Torsion
Advanced Engineering Materials, 245-250 (2011)RIS ENW BIB - Effect of specimen size on the tensile strength of WC-Co hard metal
Acta Materialia, 4244-4252 (2011)RIS ENW BIB - Work hardening in micropillar compression: In situ experiments and modeling
Acta Materialia, 3825-3840 (2011)RIS ENW BIB - Die Sonne auf die Erde holen
, 2 (2011)RIS ENW BIB - Dynamic behavior of nanometer-scale amporphous intergranular film in silicon nitride by in situ high-resolution transmission electron microscopy
Journal of the European Ceramic Society, 1835-1840 (2011)RIS ENW BIB - Recrystallization and Grain Growth in Ultrafine-Grained Materials Produced by High Pressure Torsion
Advanced Engineering Materials, 245-250 (2011)RIS ENW BIB - Der Stoff, aus dem die Industrie gemacht wird
, 1 (2011)RIS ENW BIB - Dislocation storage in single slip-oriented Cu micro-tensile samples: New insights via X-ray microdiffraction
Philosophical Magazine, 1256-1264 (2011)RIS ENW BIB - Aspect ratio and stochastic effects in the plasticity of uniformly loaded micrometer-sized specimens
Acta Materialia, 2937-2947 (2011)RIS ENW BIB - In situ Study of Cracking and Buckling of Chromium Films on PET Substrates
Experimental Mechanics, 219-227 (2011)RIS ENW BIB - Fracture toughness evaluation of ultrafine-grained nickel
Scripta Materialia, 982-985 (2011)RIS ENW BIB - Deformation mechanisms in micron-sized PST TiAl compression samples: Experiment and model
Acta Materialia, 3410-3421 (2011)RIS ENW BIB - Review on the EFDA programme on tungsten materials technology and science
Journal of Nuclear Materials, 463-467 (2011)RIS ENW BIB - In-situ TEM heating study of the γ lamellae formation inside the α2 matrix of a Ti-45Al-7.5Nb alloy
Advanced Materials Research, 1365-1368 (2011)RIS ENW BIB - On the mechanism of fatigue crack propagation in ductile metallic materials
Fatigue & Fracture of Engineering Materials & Structures, 1-16 (2011)RIS ENW BIB - Ultrasonic Evaluation of Severely Plastically Deformed Metals
Key Engineering Materials, 374-377 (2011)RIS ENW BIB - Deformation mechanisms of a modified 316L austenitic steel subjected to high pressure torsion
Materials Science and Engineering A, 2776-2786 (2011)RIS ENW BIB - Attenuation of ultrasound in severely plastically deformed nickel
NDT&E International, 261-266 (2011)RIS ENW BIB - An Overview on the Fracture Behavior of Metals Processed by High Pressure Torsion
Materials Science Forum, 671-676 (2011)RIS ENW BIB - Effect of Impurities on the Microstructure of HPT Deformed Nickel
Materials Science Forum, 797-802 (2011)RIS ENW BIB - Ultrafine Structure Formation in Aluminium Alloy Processed by HPT and the Mechanical Properties Response
Materials Science Forum, 903-908 (2011)RIS ENW BIB - Microstructure and Properties of a Fe-Cu Composite Processed by HPT Powder Consolidation
Materials Science Forum, 229-234 (2011)RIS ENW BIB - Local and non-local behavior and coordinated buckling of CNT turfs
Carbon, 1430-1438 (2011)RIS ENW BIB - Source controlled yield and hardening of Cu(100) studied by in situ TEM
Acta Materialia, 1328-1337 (2011)RIS ENW BIB - Electrical properties and structure of grain boundaries in n-conducting BaTiO3 ceramics
Journal of the European Ceramic Society, 763-771 (2011)RIS ENW BIB - Microstructure of Pure Ni Subjected to High Pressure Torsion
Materials Science Forum, 529-534 (2011)RIS ENW BIB - Recrystallization kinetics of ultrafine-grained Ni studied by dilatometry
Journal of Alloys and Compounds, 309-311 (2011)RIS ENW BIB - RCF and wear in theory and practice - The influence of rail grade on wear and RCF
Wear, 125-133 (2011)RIS ENW BIB - Effect of Large Shear Deformations on the Fracture Behavior of a Fully Pearlitic Steel
Metallurgical and Materials Transactions, 1609-1618 (2011)RIS ENW BIB
Master Thesis
Master Thesis
- Nanoidentation response of single crystal cooperfilms on sapphire
(2019)RIS ENW BIB - Effects of alloying and fluxing treatment on thermal, magnetic and structural properties of Fe-(Ni, Co)-P-C metallic glass ribbons
(2019)RIS ENW BIB - Comparative study on the miscibility of Cu-Fe-Co compounds processed by methods of severe deformation
(2019)RIS ENW BIB - Deformation Mechanisms in Metallic Glasses: An Atomistic Study
(2019)RIS ENW BIB - The role of adhesion layers on the interfacial reliability of multilayer insulators
(2019)RIS ENW BIB - Mechanical, Physical and Structural Investigation of Severe Plastically Deformed CuZr-Based Metallic Glasses
(2019)RIS ENW BIB - Digitale Bildkorrelation anhand der magnetokalorischen LaFeSi-Legierung
(2018)RIS ENW BIB - Severe Plastic Deformation Behavior of CuAg Cast Alloys
(2018)RIS ENW BIB - Thermo-mechanisches Verhalten von dünnen Mo-Ag Filmen
(2018)RIS ENW BIB - Microstructural Evolution of Cu-Fe-Co and Ag-Fe-Co Composites Processed by High-Pressure Torsion
(2018)RIS ENW BIB - Influence of Annealing on the Magnetic Properties of HPT Deformed Soft Magnetic Materials
(2018)RIS ENW BIB - Surface quality analysis of femto-second laser processed trenches
(2018)RIS ENW BIB - Auf dem Weg zu strahlungsbeständigen Materialien: Evaluierung von Strahlungseffekten in grenzflächenreichem, nanostrukturiertem Cu-Fe-Ag
(2018)RIS ENW BIB - Cross-sectional properties of carburized steel
(2018)RIS ENW BIB - Charakterisierung von neuen Schichtwerkstoffen auf Silizium mittels Nanoindentierung
(2017)RIS ENW BIB - Thermisch aktivierte Verformungsmechanismen untersucht mittels Druckversuchen an ultrafeingekörnten raumzentrierten Vanadium
(2017)RIS ENW BIB - Fatigue Crack Growth Behavior of a Nanocrystalline Austenitic Steel
(2017)RIS ENW BIB - The influence of deformation and proton-irradiation on the mechanical behavior in naonocrystalline stainless steels
(2017)RIS ENW BIB - Automated Image Processing for Residual Stress Measurements of Thin Films using MATLAB
(2017)RIS ENW BIB - Micromechanical testing of wood samples: A new preparation route using femtosecond-pulsed laser ablation
(2016)RIS ENW BIB - Micromechanical Characterization of Self-Organized Ti1-xAIxN Nanolamellae: The Influence of Interface Coherency and Phase Alteration on Fracture Behaviour
(2016)RIS ENW BIB - Tiefentemperatur-Nanoindentierung von einkristallinen Kupfer-Chrom und Wolfram
(2015)RIS ENW BIB - Fracture mechanisms of AISiCu casting alloys
(2015)RIS ENW BIB - Hochtemperatur nanoindenting von ultrafeinkörnigem und einkristallinem Chrom und Tantal
(2015)RIS ENW BIB - Texture evolution in nanocrystalline W-Cu composites
(2015)RIS ENW BIB - On the Anisotropy of Deformation in hexagonal Structures: A Microcompression Investigation of Single-Crystalline Magnesium
(2015)RIS ENW BIB - Mechanische Eigenschaften hochverformter Titanlegierungen
(2015)RIS ENW BIB - Strukturuntersuchungen an einer High-Entropy Legierung
(2014)RIS ENW BIB - Role of microstructure on the electro-mechanical behaviour of copper films on polyimide
(2014)RIS ENW BIB - The influence of high current densities on intact and cracked thin gold films on flexible polyimide substrate
(2014)RIS ENW BIB - Development of micrometer-sized specimen production processes for nonconductive materials
(2014)RIS ENW BIB - Oxidstabilisierte nanokristalline Metalle
Diplomarbeit, Montanuniversität Leoben, November 2006, None (2014)Webseite RIS ENW BIB - Production and characterization of particle-stabilized nanocrystalline Cu for high temperature applications
Diplomarbeit, Montanuniversität Leoben, November 2006, None (2014)Webseite RIS ENW BIB - Atomic structure study on the CrN film and oxide interface
Diplomarbeit, Bei Hang university, Beijing, P.R.China, 2013, None (2013)RIS ENW BIB - Fabrication and thermo-mechanical behavior of nanoporous copper
(2013)RIS ENW BIB - Auswirkung der Porenform und der Umformbedingungen auf das Porenschließverhalten
(2013)RIS ENW BIB - High temperature mechanical testing of novel Cu-Nb nanocomposites
(2013)RIS ENW BIB - Oxidation Behaviour of a Novel Nanolamellar Ti0.05Al0.95N Coating
, 35 (2013)RIS ENW BIB - The influence of Hydrogen and Nitrogen impurities on the annealing behaviour of undoped silicon glass
(2013)RIS ENW BIB - Untersuchung von alternativen Legierungskonzepten für presshärtende Stähle
(2013)RIS ENW BIB - Lokale Verformungsanalyse an einem TRIP-Stahl
Diplomarbeit, Montanuniversität Leoben, Dezember 2012, None (2012)Webseite RIS ENW BIB - Ermüdungseigenschaften und Mikrostrukturevolution von mikro- und nanokristallinen Mikrobiegeproben
Diplomarbeit, Montanuniversität Leoben, Oktober 2012, None (2012)Webseite RIS ENW BIB - Lokale Verformungsanalyse an einkristallinen Cu- und Au-Mikrozugproben mit Hilfe von Bildkorrelationsverfahren und AFM-Messungen
Diplomarbeit, Montanuniversität Leoben, Oktober 2012, None (2012)Webseite RIS ENW BIB - Reversible Versetzungsbewegung in ein- und bikristallinen Kupfer-Mikrobiegebalken: Ein in situ µLaue Experiment
Diplomarbeit, Montanuniversität Leoben, Oktober 2012, None (2012)Webseite RIS ENW BIB - Bruchmechanische Untersuchungen an vier TNM Gefügen
Diplomarbeit, Montanuniversität Leoben, Oktober 2012, None (2012)Webseite RIS ENW BIB - Charakterisierung von CrN-Filmen auf MgO-Substraten mittels Transmissionselektronenmikroskopie
(2012)RIS ENW BIB - Einfluss der Hochverformung auf das Ermüdungsverhalten eines austenitischen Stahls
(2011)RIS ENW BIB - Synchrotron X-Ray Nanobeam Experimente an CrN-Schichten zur Bestimmung von Mikrostrukturgradienten
(2011)RIS ENW BIB - Transmissionselektronenmikroskopische Untersuchungen der CrN/MgO Grenzfläche
(2011)RIS ENW BIB - Zyklische Plastizität an Microbiegeproben
(2011)RIS ENW BIB - Bruch- und Verformungsverhalten von ultrafeinkörnigem Titan
(2011)RIS ENW BIB
Other
Other
- Phase Identification and Size Evaluation of Mechanically Alloyed Cu-Mg-Ni Powders
In: Nanostructured Materials - Fabrication to Applications, Intech (2017, Ch.3)DOI RIS ENW BIB - High pressure torsion
In: Rosochowski A., ed. Severe Plastic Deformation Technology, Whittles Publishing (2017, Chapter 4)RIS ENW BIB - In Situ μLaue: Instrumental Setup for the Deformation of Micron Sized Samples
In: Neutrons and Synchrotron Radiation in Engineering Materials Science: From Fundamentals to Applications:, Wiley (, 425-438)DOI RIS ENW BIB - In situ testing of flexible electronics: an alternative to AFM
Electronic Engineering Times Europe, 36-37 (2015)RIS ENW BIB - Load history effects on fatigue crack propagation: Its effect on the R-curve for threshold
International Journal of the Italian Group of Fracture (2015)RIS ENW BIB - Studying the Electro-Mechanical Behavior of Thin Films
Olympus Application note (2015)RIS ENW BIB - Methods to measure the adhesion of metal-polymer interfaces
(2015)RIS ENW BIB - Understanding nanoscale plasticity using quantitative in-situ TEM
(2013)RIS ENW BIB - Atomic-resolution electron microscopy - going beyond imaging
(2013)RIS ENW BIB - Große Auszeichnung für Materialwissenschaftler
Montanuniversität Leoben, ed., 1 (2013)Download RIS ENW BIB - Reinhard Pippan erhält ERC Advanced Grant
Österreichische Akademie der Wissenschaften, ed., 1 (2013)Download RIS ENW BIB - On configurational forces at boundaries in fracture mechanics
In: A Micromechanics of Defects in Solids Pilar M. Eds., ed.Sevilla, Springer Science+Business Media B.V. (2012, 1-15)RIS ENW BIB - Fracture Mechanics
In: E of C Wiley Nicolais L., ed.Hoboken, New Jersey, John Wiley & Sons, Hoboken, New Jersey, USA (2012, 1126-1141)Download RIS ENW BIB - Mechanische Eigenschaften in kleinen Dimensionen: neue Einblicke in das größenabhängige Verformungsverhalten von Metallen
(2012)RIS ENW BIB - In-situ Electron Microscopy
Leoben, Charlottesville, Regensburg, Viley-VCH Verlag & Co. KGaA(2012,383)DOI RIS ENW BIB