PhD Thesis

PhD Thesis

  • High Pressure Torsion Deformation of Nanocarbon-reinforced Metal Matrix Composites
    Katzensteiner A.
    (2019)
  • Implementation of femtosecond laser processing for materials testing and research
    Pfeifenberger M.
    (2019)
  • Thermodynamic Stability and Mechanical Properties of Nanocrystalline High-entropy Alloys
    Schuh B.
    (2018)
  • Simulation von Rissen in höchstfesten Stahlblechen mit einem Trefftz-Element für Mixed-Mode-Beanspruchungen
    Hartmann J.
    Fortschritt-Berichte VDI (2018)
  • Fracture toughness and microstructural stability of heavily deformed tungsten materials
    Nikolic V.
    (2018)
  • Processing - Structure - Property Relationships in Selected Iron-Based Nanostructures"
    Müller T.
    (2018)
  • Bulk metallic glass composites fabricated via high pressure torsion
    Krämer L.
    (2018)
  • Atomic-scale characterization of severely deformed nanocrystalline alloys
    Guo J.
    (2018)
  • Advanced Nanoindentation Techniques for the Extraction of Material Flow Curves
    Leitner A.
    (2018)
  • "Mechanical and Interfacial Integrity of Metal-Polymer Multilayer Systems"
    Putz B.
    (2017)
  • Depth resolved stress gradient and dislocation analyses in III-N multilayer structures
    Reisinger M.A.
    (2017)
  • "The Role of Interfaces in BCC Metal Plasticity Across Length-Scales and Temperatures"
    Fritz R.
    (2017)
  • "Structural and Mechanical Gradients in Nanostructured Thin Films"
    Zalesak J.
    (2017)
  • "Damage Tolerant Design Concepts for the Application of High Strength Materials in Railways Switch Components"
    Kolitsch S.
    (2017)
  • Application of the Configurational Forces Concept for the Design of Tough, Strong and Damage-tolerant Composites
    Sistaninia M.
    (2017)
  • Structural Instabilities in Nanostructured Metals
    Kapp M.
    (2017)
  • Thermo-mechanical Behaviour of Thick Copper Metallizations for Power Electronics
    Bigl S.
    (2017)
  • Residual Stresses and Crack Growth in Microelectronic Thin Films
    Konetschnik R.
    (2017)
  • Fatigue crack growth of noncrystalline and ultrafine-grained metals processed by severe plastic deformation
    Leitner T.
    (2017)
  • Deformation-induced supersaturation of immiscible binary systems
    Kormout K.
    (2016)
  • Combcrack Generation in PVD Coated Hardmetal Milling Inserts
    Teppernegg T.
    (2016)
  • Nanoscale Investigations of Performance-critical Regions in Non-homogeneous Metallic and Ceramic Thin Films
    Todt J.
    (2016)
  • Bruchverhalten von Fe - Si - Al Stählen
    Umgeher A.
    (2016)
  • Rissfortschritt in duktilen Stählen unter zyklischer Belastung: Einfluss des Herstellungsverfahrens und der Lastgeschichte
    Zhou X.
    (2015)
  • Recovery phenomena in severely deformed metals
    Renk O.
    (2015)
  • Characterization of crack growth with the configurational force concept
    Ochensberger W.
    (2015)
  • Combined atomic force and electron microscopy instrumentation to study microscale plasticity
    Kreith J.
    (2015)
  • TEM Investigations on Interactions of Dislocations with Boundaries
    Imrich P.J.
    (2015)
  • Untersuchung der Grenzflächeneigenschaften von Barrieremetallen auf dielektrischen Schichten
    B. Völker
    (2014)
  • Advanced Diffraction Techniques for Microstructure and Stress Characterisation at Multiple Scales
    M. Stefenelli
    (2014)
  • Bestimmung von Struktur-Eigenschafts-Beziehungen in nanostrukturierten dünnen Schichten mit Hilfe lokaler Charakterisierungsmethoden
    A. Zeilinger
    (2014)
  • Plasticity and fatigue of miniaturized Cu structures
    A. Wimmer
    (2014)
  • Schadenstoleranz und Festigkeitssteigerung von Antriebskomponenten
    J. Maierhofer
    (2014)
  • Die Versagensmechanismen pressgehärteter Stähle im Dreipunkt-Biegeversuch
    K.B. Benedyk
    Diplomarbeit, Montanuniversität Leoben, November 2006, None (2014)
  • Einfluss von Materialeigenschaften auf das Betriebsverhalten von Eisenbahnschienen
    C. Kammerhofer
    Diplomarbeit, Montanuniversität Leoben, November 2006, None (2014)
  • Strain Localization under Fatigue Loading
    J. Reiser
    (2013)
  • Gefüge und Eigenschaften der intermetallischen TNM-Legierung
    M. Schloffer
    , 321 (2013)
  • Bruch und Ermüdung von inhomogenen Materialien
    Zechner J.
    , 167 (2013)

Conference Papers

Conference Papers

  • Biomimetic Design Concepts for the Pipe Architecture of Tomorrow
    Pinter G., F. Arbeiter, J. Wiener, E. Mayrbäurl, A. Frank, O. Kolednik
    , 1-8 (2018)
  • Influence of Secondary Phase on Intrinsic Threshold and Path of Shear-Mode Fatigue Cracks in Metals
    Vojtek T., A. Hohenwarter, R. Pippan, J. Pokluda
    Acta Phys. Pol. A, 134, 699-702 (2018)
  • Design and development of MEMS-based structures for in-situ characterization of thermo-mechanical behaviour of thin metal films
    Saghaeian F., J. Keckes, K.A. Schreiber, T. Mittereder
    Microelectron. Reliab., 88-90, 829-834 (2018)
  • High electrocatalytic performance of a graphene-supported PtAu nanoalloy for methanol oxidation
    Chang G., Z. Cai, H. Jia, Z. Zhang, X. Liu, Z. Liu, R. Zhu, Y. He
    Int. J. Hydrog. Energy, 43, 12803-12810 (2018)
  • Sub 25 nm focusing with a long working distance using multilayer Laue lenses
    Kubec A., S. Niese, M. Rosenthal, J. Gluch, M. Burghammer, P. Gawlitza, J. Keckes, A. Leson
    J. Instrum., 13, ARTN C04011 (2018)
  • Nanodiffraction Strain Mapping of Metallic Glasses During In Situ Deformation
    Gammer C., J. Eckert
    Proceedings of the First International Conference on Theoretical, Applied and Experimental Mechanics (2018)
  • Structure Modulation and Nanocrystallization of Metallic Glasses: How to Tune Mechanical Properties
    Eckert J.
    , 352-353 (2018)
  • Fatique Crack-Growth Properties of SPD-Metals
    Hohenwarter A.
    Proceedings of the First International Conference on Theoretical, Applied and Experimental Mechanics, 347-349 (2018)
  • Synthesis and Properties of Bulk Metallic Glass Composites
    Krämer L., M. Kapp, V. Maier-Kiener, K. Kormout, R. Pippan
    Proceedings of the First International Conference on Theoretical, Applied and Experimental Mechanics, 333-335 (2018)
  • Plasticity Enhancement of Composite and Nanoscaled Metallic Glasses
    Sopu D., M. Stoica, J. Eckert
    Forschungszentrum Jülich GmbH, ed. NIC Symposium 2018, 281-288 (2018)
  • Laser Ultrasonic Thin Film Characterization of Si-Cu-Al-Cu Multi-Layered Stacks
    Grünwald E., R. Nuster, G. Paltauf, T. Maier, R. Wimmer-Teubenbacher, R. Konetschnik, D. Kiener, V. Leitgeb, A. Köck, R. Brunner
    Materials Today: Proceedings, 4, 7122-7127 (2017)
  • Evolution of the microstructure in carbon nanotube reinforced Nickel matrix composites processed by high-pressure torsion
    Aristizabal K., S. Suárez, A. Katzensteiner, A. Bachmaier, F. Mücklich
    , ARTN 012008 (2017)
  • Finite element modeling of the residual stress evolution in forged and direct-aged alloy 718 turbine disks during manufacturing and its experimental validation
    Drexler A., W. Ecker, R. Hessert, B. Oberwinkler, H.-P. Gänser, J. Keckes, M. Hofmann, A. Fischersworring-Bunk
    , ARTN 070001 (2017)
  • Pt nanoparticles modified Au dendritic nanostructures: Facile synthesis and enhanced electrocatalytic performance for methanol oxidation
    Jia H., G. Chang, H. Shu, M. Xu, X. Wang, Z. Zhang, X. Liu, H. He, K. Wang, R. Zhu, Y. He
    Int. J. Hydrog. Energy, 42, 22100-22107 (2017)
  • Micro-Mechanical In Situ Measurements in Thin Film Systems Regarding the Determination of Residual Stress, Fracture Properties and Interface Toughness
    Konetschnik R., D. Kiener, D. Kozic, H.-P. Gänser, R. Brunner
    , 750-751 (2017)
  • Role of interfaces on microstructure refinement and mechanical properties of severe plastically deformed copper and copper-silver eutectic
    Ghosh P., K.S. Kormout, R. Pippan
    , ARTN 012021 (2017)
  • Strength and ductility of heavily deformed pearlitic microstructures
    Hohenwarter A., M.W. Kapp, B. Völker, O. Renk, R. Pippan
    , ARTN 012003 (2017)
  • From an understanding of structural restoration mechanisms towards a selective processing of extreme nanolamellar structures
    Renk O., P. Ghosh, R. Pippan
    (2017)
  • Crack closure and retardation effects – experiments and modelling
    Maierhofer J., H.-P. Gänser, R. Pippan
    Procedia Structural Integrity, 4, 19-26 (2017)
  • Experimental evidence of a common local mode II growth mechanism of fatigue cracks loaded in modes II, III and II plus III in niobium and titanium
    Vojtek T., A. Hohenwarter, R. Pippan, J. Pokluda
    Int. J. Fatigue, 92, 470-477 (2016)
  • Investigation of Ni-B Alloys for Joining of TiB2 Ultra-High-Temperature Ceramic
    Xi L., I. Kaban, R. Nowak, G. Bruzda, N. Sobczak, M. Stoica, J. Eckert
    J. Mater. Eng. Perform., 25, 3204-3210 (2016)
  • Tailoring the mechanical and magnetic properties of nanocrystalline materials by decomposition of metastable solid solutions
    Bachmaier A., J. Schmauch, H. Aboulfadl, A. Verch, H. Krenn, C. Motz, R. Pippan
    (2016)
  • Auger and X-ray photoelectron spectroscopy on lithiated HOPG
    Hoffmann M., S. Oswald, M. Zier, J. Eckert
    Surf. Interface Anal., 48, 501-504 (2016)
  • Determination of crack initiation and crack growth stress-life curves by fracture mechanics experiments and statistical analysis
    Kolitsch S., H.P. Gänser, R. Pippan
    , 3026-3039 (2016)
  • Fracture and Material Behavior of Thin Film Composites
    Kozic D., R. Treml, V. Maier-Kiener, R. Schöngrundner, R. Brunner, D. Kiener, T. Antretter, H.P. Gänser
    (2016)
  • Recent advances in research in severe plastic deformation in Leoben
    Pippan R., A. Hohenwarter, O. Renk, K. Kormout, V. Maier, L. Krämer, P. Ghosh
    (2016)
  • Fabrication of Cu-Al-Ni-Mn Shape-Memory Parts by Selective Laser Melting
    Gustmann T., A. Neves, U. Kühn, P. Gargarella, S. Kiminami, C. Bolfarini, J. Eckert, Pauly. S.
    (2016)
  • Design of fracture resistant composites by utilizing spatial material property variations
    Sistaninia M., O. Kolednik
    (2015)
  • Physically correct assessment of fatigue crack growth in elastic–plastic materials with the J-integral
    Ochensberger W., O. Kolednik
    (2015)
  • Hardening by annealing: insights from different alloys
    Renk O., A. Hohenwarter, B. Schuh, J.H. Li, R. Pippan
    IOP PUBLISHING LTD, ed. (2015)
  • Phase decomposition and nano structure evolution of metastable nanocrystalline Cu-Co solid solutions during thermal treatment
    Bachmaier A., M. Stolpe, T. Müller, C. Motz
    IOP PUBLISHING LTD, ed. (2015)
  • In-situ tensile straining of metal films on polymer substrates under an AFM
    M.J. Cordill, V.M. Marx
    (2013)
  • Effect of delaminations in Charpy specimens on impact energy in thermomechanically rolled hot strip steel
    M. Sonnleitner, O. Kolednik
    , 1-8 (2013)
  • Adhesion of Printed Circuit Boards with bending and the effect of reflow cycles
    M.J. Cordill, R. Schöngrundner, H.P. Krückl, T. Krivec, M. Kurz, G. Maier
    IEEE Catalog Number CFP13566-CDR, ed. ISBN 978-1-4673-6137-8, 1-8 (2013)
  • Mechanical testing of micron and sub-micron samples using in-situ electron microscopy
    D. Kiener
    , 239-244 (2013)
  • Miniaturized Cantilever Bending Experiments for Determination of Fracture Properties of Tungsten as a Model Material
    S. Wurster, R. Pippan
    , 271-275 (2013)
  • Verformungsinduzierte Phasenumwandlung einzelner Austenitkörper
    Kasberger R., O. Kolednik
    B Lehrstuhl für Umformtechnik Bruno, ed. XXXII. Verformungskundliches Kolloquium, 143-149 (2013)
  • Nanodiffraction at MINAXS (P03) beamline of PETRA III
    Krywka C. K.J.
    , 072021-4 (2013)

Journal Articles

Journal Articles

  • Effect of boron doping on grain boundary cohesion in technically pure molybdenum investigated via meso-scale three-point-bending tests
    Jakob S., A. Hohenwarter, A. Lorich, W. Knabl, R. Pippan, H. Clemens, V. Maier-Kiener
    INT J REFRACT MET H, 113, ARTN 106173 (2023)
  • Microstructural influences on fatigue threshold behavior and fracture toughness of an additively manufactured gamma-titanium aluminide
    Zeiler S., A. Lintner, M. Schloffer, R. Pippan, A. Hohenwarter
    INTERMETALLICS, 156, ARTN 107852 (2023)
  • Link between cracking mechanisms of trilayer films on flexible substrates and electro-mechanical reliability under biaxial loading
    Husain S.A., P. Kreiml, P.O. Renault, C. Mitterer, M.J. Cordill, D. Faurie
    J VAC SCI TECHNOL A, 41, ARTN 033403 (2023)
  • Enhancement of hydrogen storage properties from amorphous Mg85Ni5Y10 alloy
    Zhou H., Z. Ding, Y.A. Chen, Z.Q. Lan, S.F. Guo, F. Spieckermann, V. Zadorozhnyy, J. Tan, F.S. Pan, J. Eckert
    J NON-CRYST SOLIDS, 605, ARTN 122167 (2023)
  • Additive manufacturing of CMCs with bimodal microstructure
    Maurya H.S., R.J. Vikram, K. Kosiba, K. Juhani, F. Sergejev, S. Suwas, K.G. Prashanth
    J ALLOY COMPD, 938, ARTN 168416 (2023)
  • Additively manufactured equiatomic CoCrFeMnNi high entropy alloy: Precipitation-induced heterogeneity by mechano-chemical coupling
    Taheriniya S., N. Choi, S. Yang, R. Sonkusare, J.H. Yu, J.S. Lee, H. Roesner, M. Peterlechner, T. Boll, C. Gammer, H. Hahn, S.V. Divinski, G. Wilde
    J ALLOY COMPD, 938, ARTN 168514 (2023)
  • Strong and ductile titanium via additive manufacturing under a reactive atmosphere
    Dong Y., D. Wang, Q. Li, X. Luo, J. Zhang, K.G. Prashanth, P. Wang, J. Eckert, L. Madler, V.I. Okulov, M. Yan
    MATER TODAY ADV, 17, ARTN 100347 (2023)
  • Describing mechanical damage evolution through in situ electrical resistance measurements
    Gebhart D., A. Krapf, B. Merle, C. Gammer, M.J. Cordill
    J VAC SCI TECHNOL A, 41, ARTN 023408 (2023)
  • Effect of scanning strategy on microstructure and texture evolution in a selective laser melted Al-33Cu eutectic alloy
    Vikram R.J., S.A. Gokulnath, K.G. Prashanth, S. Suwas
    J ALLOY COMPD, 936, ARTN 168098 (2023)
  • Deformation Induced Structure and Property Changes in a Nanostructured Multiphase CrMnFeCoNi High-Entropy Alloy
    Schuh B., I. Issa, T. Mueller, T. Kremmer, C. Gammer, R. Pippan, A. Hohenwarter
    NANOMATERIALS, 13, ARTN 924 (2023)
  • Effect of NiCoFeAlTi high entropy intermetallic reinforcement particle size on the microstructure and mechanical properties of CoCrFeMnNi high-entropy alloy composites fabricated by selective laser melting
    Zhang Z., P. Ma, Y. Fang, Z. Yang, N. Zhang, K.G. Prashanth, Y. Jia
    J ALLOY COMPD, 947, ARTN 169417 (2023)
  • Hierarchical microstructures and strengthening mechanisms of nano-TiC reinforced CoCrFeMnNi high-entropy alloy composites prepared by laser powder bed fusion
    Chen H., K. Kosiba, T. Lu, N. Yao, Y. Liu, Y. Wang, K.G. Prashanth, C. Suryanarayana
    J MATER SCI TECHNOL, 136, 245-259 (2023)
  • A novel crack-free and refined 2195-Ti/CeB6 composites prepared by laser powder bed fusion
    Xi L., J. Xu, D. Gu, L. Feng, Q. Lu, K.G. Prashanth
    MATER LETT, 333, ARTN 133572 (2023)
  • Special Issue "Novel Structural and Functional Material Properties Enabled by Nanocomposite Design "
    Eckert J., D. Kiener
    NANOMATERIALS, 13, ARTN 586 (2023)
  • Can Severe Plastic Deformation Tune Nanocrystallization in Fe-Based Metallic Glasses?
    Antoni M., F. Spieckermann, N. Plutta, C. Gammer, M. Kapp, P. Ramasamy, C. Polak, R. Pippan, M.J.J. Zehetbauer, J. Eckert
    MATERIALS, 16, ARTN 1260 (2023)
  • Pd-based Metallic Glasses as Promising Materials for Hydrogen Energy Applications
    Sarac B., A.S. Sarac, J. Eckert
    J ELECTROCHEM SOC, 170, ARTN 014503 (2023)
  • Exchange Bias Demonstrated in Bulk Nanocomposites Processed by High-Pressure Torsion
    Zawodzki M., L. Weissitsch, H. Krenn, S. Wurster, A. Bachmaier
    NANOMATERIALS, 13, ARTN 344 (2023)
  • Surface Chemistry and Degradation Processes of Dense La0.6Sr0.4CoO3-delta Thin Film Electrodes
    Siebenhofer M., U. Haselmann, A. Nenning, G. Friedbacher, E.A. Bumberger, S. Wurster, W. Artner, H. Hutter, Z. Zhang, J. Fleig, M. Kubicek
    J ELECTROCHEM SOC, 170, ARTN 014501 (2023)
  • Circumventing Solidification Cracking Susceptibility in Al-Cu Alloys Prepared by Laser Powder Bed Fusion
    Xi L., Q. Lu, D. Gu, S. Cao, H. Zhang, I. Kaban, B. Sarac, K.G. Prashanth, J. Eckert
    3D PRINT ADDIT MANUF (2022)
  • Phase Transformation Induced by High Pressure Torsion in the High-Entropy Alloy CrMnFeCoNi
    Chulist R., A. Pukenas, P. Chekhonin, A. Hohenwarter, R. Pippan, N. Schell, W. Skrotzki
    MATERIALS, 15, ARTN 8407 (2022)
  • Decomposition-resistant carbonitride precipitates in X30CrMoN15-1 high-nitrogen bearing steel deformed by high-pressure torsion
    Kiranbabu S., Y. Qin, L. Sreekala, S.M. Das, R. Pippan, L. Morsdorf, M. Herbig
    Materials Science & Engineering A, 144529 (2022)
  • Surface Topography and Biocompatibility of cp-Ti Grade2 Fabricated by Laser-Based Powder Bed Fusion: Influence of Printing Orientation and Surface Treatments
    Petrusa J., B. Meier, G. Gruenbacher, W. Waldhauser, J. Eckert
    ADV ENG MATER, 2022, 2201073 (2022)
  • Probing the stability, adhesion strength, and fracture mechanism of Mg/ Al2Y interfaces via first-principles calculations
    Zhou Y., H. Wang, Q. Dong, J. Tan, X. Chen, B. Jiang, F. Pan, J. Eckert
    MATERIALS TODAY COMMUNICATIONS, 33, ARTN 104612 (2022)
  • Selective laser melting of in-situ CoCrFeMnNi high entropy alloy: Effect of remelting
    Karimi J., L. Kollo, R. Rahmani, P. Ma, Y.D. Jia, K.G. Prashanth
    J. Manuf. Process., 84, 55-63 (2022)
  • Reactive interdiffusion of an Al film and a CoCrFeNi high-entropy alloy at elevated temperatures
    Zhang Z., S. Fellner, S. Ketov, M.J. Cordill, S. Huaping, C. Mitterer, K. Song, C. Gammer, J. Eckert
    Intermetallics, 1-11 (2022)
  • Enhanced mechanical performance of gradient-structured CoCrFeMnNi high-entropy alloys induced by industrial shot-blasting
    Zhang M.Z., K. Zhang, K.K. Song, X.-Y. Zou, W.D. Song, K.F. Li, L.N. Hu, Z.Q. Zhang, J. Eckert
    RARE METALS, 1-10 (2022)
  • Iron oxide - poly(m-anthranilic acid)-poly(e-caprolactone) electrospun composite nanofibers: fabrication and properties
    Huner K., B. Sarac, E. Yuece, A. Rezvan, M. Micusik, M. Omastova, J. Eckert, A.S. Sarac
    MOL SYST DES ENG (2022)
  • In situ electrochemical observation of anisotropic lattice contraction of La0.6Sr0.4FeO3-delta electrodes during pulsed laser deposition
    Riedl C., M. Siebenhofer, S. Raznjevic, A.E. Bumberger, Z. Zhang, A. Limbeck, A.K. Opitz, M. Kubicek, J. Fleig
    PHYS CHEM CHEM PHYS, 25, 142-153 (2022)
  • Electromechanical Behavior of Al/Al2O3 Multilayers on Flexible Substrates: Insights from In Situ Film Stress and Resistance Measurements
    Putz B., T.E.J. Edwards, E. Huszar, P.A. Gruber, K.P. Gradwohl, P. Kreiml, D.M. Toebbens, J. Michler
    ADV ENG MATER, 1-15 (2022)
  • Optimal tensile properties of laser powder bed fusion hereditary basket-weave microstructure in additive manufactured Ti6Al4V
    Lu S.L., Z.J. Zhang, R. Liu, X.H. Zhou, X.G. Wang, B.N. Zhang, X.M. Zhao, J. Eckert, Z.F. Zhang
    Addit. Manuf., 59, ARTN 103092 (2022)
  • Local microstructural evolution and the role of residual stresses in the phase stability of a laser powder bed fused cold-work tool steel
    Platl J., S. Bodner, H. Leitner, C. Turk, M.A. Nielsen, J. Keckes, R. Schnitzer
    Mater. Charact., 193, ARTN 112318 (2022)
  • New-generation biocompatible Ti-based metallic glass ribbons for flexible implants
    Yüce E., L. Zarazua-Villalobos, B. Ter-Ovanessian, E. Sharifikolouei, Z. Najmi, F. Spieckermann, J. Eckert, B. Sarac
    Mater. Des., 223, ARTN 111139 (2022)
  • Improvement of hardness in Ti-stabilized austenitic stainless steel
    Sharifikolouei E., B. Sarac, A. Micoulet, R. Mager, M. Watari-Alvarez, E. Hadjixenophontos, Z. Burghard, G. Schmitz, J.P. Spatz
    MATER DESIGN, 223, ARTN 111242 (2022)
  • Microstructure and Tribological Behavior of Fe-Based Amorphous Alloy Fabricated by Plasma Spraying and Laser Remelting
    Ma P., Z. Yang, L. Fang, Z. Zhang, Y. Fang, N. Zhang, K.G. Prashanth, Y. Jia
    T INDIAN I METALS, 2022, 1-8 (2022)
  • Fiber Laser Welded Cobalt Super Alloy L605: Optimization of Weldability Characteristics
    Prasad B.H., G.M. Reddy, A.K. Das, K.G. Prashanth
    MATERIALS, 15, ARTN 7708 (2022)
  • Mechanical Properties and Microstructural Evolution of Ti-25Nb-6Zr Alloy Fabricated by Spark Plasma Sintering at Different Temperatures
    Zhu Q., P. Chen, Q. Xiao, F. Li, J. Yi, K.G. Prashanth, J. Eckert
    METALS, 12, ARTN 1824 (2022)
  • Direct Formation of Hard-Magnetic Tetrataenite in Bulk Alloy Castings
    Ivanov Y., B. Sarac, S. Ketov, J. Eckert, L. Greer
    ADVANCED SCIENCE, 2204315, 1-8 (2022)
  • Importance of the micro-lattice structure of selective laser melting processed Mo/Mo(x)S(x+1) composite: Corrosion studies on the electrochemical performance in aqueous solutions
    Alinejadian N., S.H. Kazemi, M. Grossberg-Kuusk, L. Kollo, I. Odnevall, K.G. Prashanth
    MATER TODAY CHEM, 26, ARTN 101219 (2022)
  • Microstructure and Nanoindentation Creep Behavior of Binary Al-Cu Alloy Synthesized at High Pressure
    Ma P., Z. Zhang, X. Liu, X. Shi, K.G. Prashanth, Y. Jia
    JOM, 12345, 1-8 (2022)
  • Effect of a single overload on the cyclic R-curve behaviour of a gamma-TiAl TNM alloy
    Lintner A., R. Pippan, M. Schloffer, A. Hohenwarter
    Int. J. Fatigue, 163, ARTN 107083 (2022)
  • Effect of powder bed preheating on the crack formation and microstructure in ceramic matrix composites fabricated by laser powder-bed fusion process
    Maurya H.S., K. Kosiba, K. Juhani, F. Sergejev, K.G. Prashanth
    Addit. Manuf., 58, ARTN 103013 (2022)
  • MEMS-Based in situ electron-microscopy investigation of rapid solidification and heat treatment on eutectic Al-Cu
    Dumitraschkewitz P., M.A. Tunes, C.R. Quick, D.S.R. Coradini, T.M. Kremmer, P. Ramasamy, P.J. Uggowitzer, S. Pogatscher
    Acta Mater., 239, ARTN 118225 (2022)
  • Designing lightweight multicomponent magnesium alloys with exceptional strength and high stiffness
    Gu Z., Y. Zhou, Q. Dong, G. He, J. Cui, J. Tan, X. Chen, B. Jiang, F. Pan, J. Eckert
    Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 855, ARTN 143901 (2022)
  • Enhancement in strength and thermal stability of selective laser melted Al-12Si by introducing titanium nanoparticles
    Qi J.F., C.Y. Liu, Z.W. Chen, Z.Y. Liu, J.S. Tian, J. Feng, I.V. Okulov, J. Eckert, P. Wang
    Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 855, ARTN 143833 (2022)
  • Fatigue of copper films subjected to high-strain rate thermo-mechanical pulsing
    Moser S., M. Kleinbichler, J. Zechner, M. Reisinger, M. Nelhiebel, M.C. Cordill
    Microelectron. Reliab., 137, ARTN 114782 (2022)
  • Crack Formation and Control in an AlCoCrFeNi High Entropy Alloy Fabricated by Selective Laser Melting
    Wei S., P. Ma, Y. Fang, Z. Zhang, Z. Yang, X. Shi, K.G. Prashanth
    3D PRINT ADDIT MANUF, 2022, 1-12 (2022)
  • Electroless Ni-P-MoS2-Al2O3 Composite Coating with Hard and Self-Lubricating Properties
    Mohanty S., N. Jamal, A.K. Das, K.G. Prashanth
    MATERIALS, 15, ARTN 6806 (2022)
  • Crack propagation resistance of TiAl alloys
    Pippan R., A. Hohenwarter
    MRS Bull., 47, 1-8 (2022)
  • Ti6Al4V Coating on 316L Substrate by Laser-based Fusion Process
    Shukla R., K.G. Prashanth
    Trans. Indian Inst. Met., 124, 1-10 (2022)
  • Influence of the 1% Ti content on microstructure, friction coefficient and contribution to the strengthening mechanisms in the Al20Sn1Cu alloy
    Lucchetta M.C., P. Ramasamy, F. Saporiti, J. Eckert, F. Audebert
    RESULTS IN ENGINEERING, 15, ARTN 100506 (2022)
  • Precipitation-based grain boundary design alters Inter- to Trans-granular Fracture in AlCrN Thin Films
    Meindlhumer M., T. Ziegelwanger, J. Zalesak, M. Hans, L. Loefler, S. Spor, N. Jaeger, A. Stark, H. Hruby, R. Daniel, D. Holec, J.M. Schneider, C. Mitterer, J. Keckes
    Acta Mater., 237, ARTN 118156 (2022)
  • Interface-related deformation phenomena in metallic glass/high entropy nanolaminates
    Xu Q., D. Sopu, X. Yuan, D. Kiener, J. Eckert
    Acta Mater., 237, ARTN 118191 (2022)
  • Influence of Processing Route on the Fracture Resistance of Equal Channel Angular Pressing Deformed Iron
    Hohenwarter A., R. Pippan
    Adv. Eng. Mater., 2201011, ARTN 2201011 (2022)
  • A measurement structure for in-situ electrical monitoring of cyclic delamination
    Moser S., D. Tscharnuter, M. Nelhiebel, M. Reisinger, J. Zechner, M.J. Cordill
    Surf. Coat. Technol., 445, ARTN 128715 (2022)
  • High-Entropy Alloy-Induced Metallic Glass Transformation: Challenges Posed by in situ Alloying via Additive Manufacturing
    Hadibeik S., F. Spieckermann, M. Nosko, F. Khodabakhshi, M.H. Sohi, J. Eckert
    Adv. Eng. Mater., 220764, ARTN 2200764 (2022)
  • Effect of Wear Debris Entrapment on the Tribological Performance of AlCoCrFeNi Produced by Selective Laser Melting or Spark Plasma Sintering
    Karimi J., M. Antonov, K.G. Prashanth
    Metall. Mater. Trans. A-Phys. Metall. Mater. Sci., 12345, 1-7 (2022)
  • Prior beta grain evolution and phase transformation of selective laser melted Ti6Al4V alloy during heat treatment
    Lu S.L., Z.J. Zhang, R. Liu, Z. Qu, B. Wang, X.H. Zhou, J. Eckert, Z.F. Zhang
    J. Alloy. Compd., 914, ARTN 165235 (2022)
  • Carbon nanotube-polybutadiene-poly(ethylene oxide)-based composite fibers: Role of cryogenic treatment on intrinsic properties
    Gurbuz R., B. Sarac, V. Soprunyuk, A. Rezvan, E. Yuce, W. Schranz, J. Eckert, A. Ozcan, A.S. Sarac
    Polym. Adv. Technol., 5828, 1-11 (2022)
  • Conditions near a crack tip: Advanced experiments for dislocation analysis and local strain measurement
    Gammer C., D. An
    MRS Bull., 47, 1-8 (2022)
  • Mechanical Property Evaluation of CuNb Composites Manufactured with High-Pressure Torsion
    Frazer D., R.C. Connick, C. Howard, M. Siddiqui, R. Fritz, P. Kutlesa, P. Hosemann
    JOM, 123, 1-10 (2022)
  • Magnetron Sputtered Non-Toxic and Precious Element-Free Ti-Zr-Ge Metallic Glass Nanofilms with Enhanced Biocorrosion Resistance
    Sarac B., M. Micusik, B. Putz, S. Wurster, E. Sharifikolouei, L. Xi, M. Omastova, F. Spieckermann, C. Mitterer, J. Eckert
    Adv. Mater. Interfaces, 123, ARTN 2201223 (2022)
  • Achieving 1 GPa fatigue strength in nanocrystalline 316L steel through recovery annealing
    Renk O., A. Hohenwarter, C. Gammer, J. Eckert, R. Pippan
    Scr. Mater., 217, ARTN 114773 (2022)
  • On the transition of failure control from material-intrinsic defects to defects forming during monotonically increasing and cyclic mechanical loading in WC-Co hard metal at elevated temperature
    Klunsner T., T. Lube, P. Pichler, M. Krobath, L. Walch, K. Maier, W. Ecker, S. Marsoner, C. Czettl, R. Pippan
    Acta Mater., 235, ARTN 118087 (2022)
  • Hybrid metal-ceramic biomaterials fabricated through powder bed fusion and powder metallurgy for improved impact resistance of craniofacial implants
    Rahmani R., N. Kamboj, M. Brojan, M. Antonov, K.G. Prashanth
    MATERIALIA, 24, ARTN 101465 (2022)
  • Influence of Hatch Strategy on Crystallographic Texture Evolution, Mechanical Anisotropy of Laser Beam Powder Bed Fused S316L Steel
    Bodner S., K. Hlushko, K. Kutlesa, J. Todt, O. Renk, M. Meindlhumer, F. Resch, M.A. Nielsen, J. Keckes, J. Eckert
    Adv. Eng. Mater., 1234, ARTN 2200524 (2022)
  • TMS LDI: ACCELERATING DIVERSE LEADERSHIP ACROSS EVERY LEVEL OF THE SOCIETY
    Madison J.D., M.J. Cordill
    JOM (2022)
  • Antibacterial activity, cytocompatibility, and thermomechanical stability of Ti40Zr10Cu36Pd14 bulk metallic glass
    Rezvan A., E. Sharifikolouei, A. Lassnig, V. Soprunyuk, C. Gammer, F. Spieckermann, W. Schranz, Z. Najmi, A. Cochis, A.C. Scalia, L. Rimondini, M. Manfredi, J. Eckert, B. Sarac
    MATERIALS TODAY BIO, 16, ARTN 100378 (2022)
  • Microstructure, Mechanical Properties, and Corrosion Behavior of 06Cr15Ni4CuMo Processed by Using Selective Laser Melting
    Maya J., K. Sivaprasad, G.V.S. Kumar, R. Baitimerov, P. Lykov, K.G. Prashanth
    METALS, 12, ARTN 1303 (2022)
  • Atomic-scale understanding of the structural evolution of TiN/AlN superlattice during nanoindentation - Part 1: Deformation
    Chen Z., Y. Zheng, Y. Huang, Z. Gao, H. Sheng, M. Bartosik, P.H. Mayrhofer, Z. Zhang
    Acta Mater., 234, ARTN 118008 (2022)
  • Atomic-scale understanding of the structural evolution in TiN/AlN superlattice during nanoindentation-Part 2: Strengthening
    Chen Z., Y. Zheng, Y. Huang, Z. Gao, H. Sheng, M. Bartosik, P. Mayrhofer, Z. Zhang
    Acta Mater., 234, ARTN 118009 (2022)
  • Selective Laser Melting of TiC-Based Cermet: HIP Studies
    Maurya H.S., L. Kollo, M. Tarraste, K. Juhani, F. Sergejev, K.G. Prashanth
    Trans. Indian Inst. Met., 98-105 (2022)
  • Wire Arc Additive Manufacturing of NiTi 4D Structures: Influence of Interlayer Delay
    Singh S., I.A. Palani, C.P. Paul, A. Funk, K.G. Prashanth
    3D Print. Addit. Manuf., 123, 1-8 (2022)
  • Effect of TiB2 addition on the mechanical and biological response of spark plasma sintered Ti6Al7Nb matrix composites
    Singh N., R. Ummethala, K.B. Surreddi, J. Jayaraj, R. Sokkalingam, M. Rajput, K. Chatterjee, K.G. Prashanth
    J. Alloy. Compd., 924, ARTN 166502 (2022)
  • A novel crack-free Ti-modified Mo alloy designed for laser powder bed fusion
    Zhang C., P. Wang, C.Y. Liu, Z.Y. Liu, M.W. Wu, X.H. Gao, M.H. LI, C. Yang, K.G. Prashanth, Z.W. Chen
    J. Alloy. Compd., 910, ARTN 164802 (2022)
  • Tribological investigations of Mo films deposited on thin polyimide substrates
    Kobierska E., S. Zak, S. Hirn, M.J. Cordill, R. Franz, M.R. de Figueiredo
    Surf. Coat. Technol., 442, ARTN 128549 (2022)
  • Effect of preheating and cooling of the powder bed by laser pulse shaping on the microstructure of the TiC based cermets
    Maurya H.S., L. Kollo, K. Juhani, F. Sergejev, K.G. Prashanth
    Ceram. Int., 48, 20612-20618 (2022)
  • Fabrication of stainless-steel microfibers with amorphous-nanosized microstructure with enhanced mechanical properties
    Sharifikolouei E., B. Sarac, Y. Zheng, P. Bala, J. Eckert
    Sci Rep, 12, ARTN 10784 (2022)
  • Mitigating the detrimental effects of galvanic corrosion by nanoscale composite architecture design
    Renk O., I. Weissensteiner, M. Cihova, E.-M. Steyskal, N.G. Sommer, M. Tkadletz, S. Pogatscher, P. Schmutz, J. Eckert, P.J. Uggowitzer, R. Pippan, A.M. Weinberg
    NPJ MATERIALS DEGRADATION, 6, ARTN 47 (2022)
  • Mapping Shear Bands in Metallic Glasses: From Atomic Structure to Bulk Dynamics
    Sheng H., D. Sopu, S. Fellner, J. Eckert, C. Gammer
    Phys. Rev. Lett., 128, ARTN 245501 (2022)
  • Film thickness and architecture effects in biaxially strained polymer supported Al/Mo bilayers
    Cordill M.J., P. Kreiml, B. Putz, C.O.W. Trost, A. Lassnig, C. Mitterer, D. Faurie, P.-O. Renault
    MATERIALS TODAY COMMUNICATIONS, 31, ARTN 103455 (2022)
  • Synthesis and structure of refractory high entropy alloy thin films based on the MoNbTaW system
    Gruber G., A. Lassnig, S. Zak, C. Gammer, M.J. Cordill, R. Franz
    Surf. Coat. Technol., 439, ARTN 128446 (2022)
  • Thermoplasticity of metallic glasses: Processing and applications
    Sarac B., J. Eckert
    Prog. Mater. Sci., 127, ARTN 100941 (2022)
  • Technical Note: Hardness, Corrosion Behavior, and Microstructural Characteristics of a Selective Laser Melted 17-4 PH Steel
    Chaitanya P., R. Goud, R. Raghavan, M. Ramakrishna, K.G. Prashanth, S. Gollapudi
    Corrosion, 78, 465-472 (2022)
  • Additive Manufacturing of CoCrFeMnNi High-Entropy Alloy/AISI 316L Stainless Steel Bimetallic Structures
    Sokkalingam R., Z. Chao, K. Sivaprasad, V. Muthupandi, J. Jayaraj, P. Ramasamy, J. Eckert, K.G. Prashanth
    Adv. Eng. Mater., 1234, ARTN 2200341 (2022)
  • Configurational force based analysis of creep crack growth
    Kolednik O., A. Tiwari, C. Posch, M. Kegl
    Int. J. Fract., 2022, 1-25 (2022)
  • High-Throughput Micromechanical Testing Enabled by Optimized Direct Laser Writing
    Jelinek A., S. Zak, M. Alfreider, D. Kiener
    Adv. Eng. Mater., 2022, ARTN 2200288 (2022)
  • Redeposition layer formation caused by shading effect during sputter cleaning and associated damage on rake face of TiN coated high-speed steel drills
    Kampichler J., Z.L. Zhang, T. Kluensner, B. Sartory, J. Wosik, F. Nahif
    Surf. Coat. Technol., 438, ARTN 128412 (2022)
  • Mechanical Properties, Microstructure, and Actuation Behavior of Wire Arc Additive Manufactured Nitinol: Titanium Bimetallic Structures
    Singh S., E. Demidova, N. Resnina, S. Belyaev, I.A. Palani, C.P. Paul, A. Kumar, K.G. Prashanth
    3D Print. Addit. Manuf., 9, 98-105 (2022)
  • Effect of Powder Characteristic and Aging Treatment on the Corrosion Behavior of Selective Laser Melted Al-20Si Alloy
    Ma P., Z. Zhang, Y. Ke, S. Yang, K. Deng, P. Cheng, H. Chen, K.G. Prashanth
    Trans. Indian Inst. Met. (2022)
  • Interaction of crack and hole: effects on crack trajectory, crack driving force and fracture toughness
    Brescakovic D., M. Kegl, O. Kolednik
    Int. J. Fract., 88, 1-26 (2022)
  • Ti6Al7Nb-TiB nanocomposites for ortho-implant applications
    Singh N., V. Edachery, M. Rajput, K. Chatterjee, S.V. Kailas, K.G. Prashanth
    J. Mater. Res., 1234, 98-105 (2022)
  • A novel approach for determining the stress intensity factor for cracks in multilayered cantilevers
    Sistaninia M., O. Kolednik
    Eng. Fract. Mech., 266, ARTN 108386 (2022)
  • Atomistic mechanisms underlying plasticity and crack growth in ceramics: a case study of AlN/TiN superlattices
    Koutna N., L. Loefler, D. Holec, Z. Chen, Z. Zhang, L. Hultman, P.H. Mayrhofer, D.G. Sangiovanni
    Acta Mater., 229, ARTN 117809 (2022)
  • Deformation-induced medium-range order changes in bulk metallic glasses
    Nomoto K., B. Li, C. Gammer, A.V. Ceguerra, H. Bilal, A. Hohenwarter, J. Eckert, B. Gludovatz, S.P. Ringer, J.J. Kruzic
    Phys. Rev. Mater., 6, ARTN 043603 (2022)
  • Subtle change in the work hardening behavior of fcc materials processed by selective laser melting
    Sokkalingam R., K. Sivaprasad, N. Singh, V. Muthupandi, P. Ma, Y.D. Jia, K.G. Prashanth
    PROGRESS IN ADDITIVE MANUFACTURING, 7, 453-461 (2022)
  • Effect of the Laser Processing Parameters on the Selective Laser Melting of TiC-Fe-Based Cermets
    Maurya H., L. Kollo, M. Tarraste, K. Juhani, F. Sergejev, K. Prashanth
    JOURNAL OF MANUFACTURING AND MATERIALS PROCESSING, 6, ARTN 35 (2022)
  • Linking through-thickness cracks in metallic thin films to in-situ electrical resistance peak broadening
    Gebhart D., A. Krapf, C. Gammer, B. Merle, M. Cordill
    Scr. Mater., 212, ARTN 114550 (2022)
  • Maximizing the degree of rejuvenation in metallic glasses
    Yuan X., D. Sopu, F. Spieckermann, K.K. Song, S. Ketov V, K.G. Prashanth, J. Eckert
    Scr. Mater., 212, ARTN 114575 (2022)
  • Influence of grain aspect-ratio on the fracture properties of ultrafine-grained tantalum
    Hohenwarter A., M. Rockenschaub, O. Renk
    Mater. Des., 216, ARTN 110545 (2022)
  • Thermal stress analysis and structural optimization of ladle nozzle based on finite element simulation
    Rong Z., J. Yi, F. Li, Y. Liu, J. Eckert
    MATERIALS RESEARCH EXPRESS, 9, ARTN 045601 (2022)
  • Characterization methods for strain-induced damage in polypropylene
    Wiener J., F. Preissegger, B. Plank, F. Arbeiter, O. Kolednik, G. Pinter
    Polym. Eng. Sci., 25, ARTN25979 (2022)
  • Quantitative Strain and Topography Mapping of 2D Materials Using Nanobeam Electron Diffraction
    Sickel J., Ml Asbach, C. Gammer, R. Bratschitsch, H. Kohl
    Microsc. microanal., 2022, 1-15 (2022)
  • Editorial: Fundamentals and Challenges of Advanced Amorphous and High-Entropy Alloys</p>
    Song K., Y. Huang, R. Li, J. Qiao, Z. Wang, K.G. Prashanth, D. Sopu
    Front. Mater., 9, ARTN 874556 (2022)
  • Role of laser remelting and heat treatment in mechanical and tribological properties of selective laser melted Ti6Al4V alloy
    Karimi J., M. Antonov, L. Kollo, K.G. Prashanth
    J. Alloy. Compd., 897, ARTN 163207 (2022)
  • On the existence of orthorhombic martensite in a near-alpha titanium base alloy used for additive manufacturing
    Fleissner-Rieger C., M. Tunes, C. Gammer, T. Joerg, T. Pfeifer, M. Musi, F. Mendez-Martin, H. Clemens
    J. Alloy. Compd., 897, ARTN 163155 (2022)
  • Manufacturing of Textured Bulk Fe-SmCo5 Magnets by Severe Plastic Deformation
    Weissitsch L., M. Stueckler, S. Wurster, J. Todt, P. Knoll, H. Krenn, R. Pippan, A. Bachmaier
    NANOMATERIALS, 12, ARTN 963 (2022)
  • The effect of solute atoms on the bulk and grain boundary cohesion in Ni: Implications for hydrogen embrittlement
    He S., W. Ecker, O.E. Peil, R. Pippan, V.I. Razumovskiy
    MATERIALIA, 21, ARTN 101293 (2022)
  • Fracture of severely plastically deformed titanium
    Volker B., S. Wurster, R. Pippan, A. Hohenwarter
    Mater. Lett., 309, ARTN 131382 (2022)
  • Mechanical and Tribological Behavior of Gravity and Squeeze Cast Novel Al-Si Alloy
    Chandra V., K. Krishna, M. Ravi, K. Sivaprasad, S. Dhanasekaran, K. Prashanth
    METALS, 12, ARTN 194 (2022)
  • Cracking mechanism in a laser powder bed fused cold-work tool steel: The role of residual stresses, microstructure and local elemental concentrations
    Platl J., S. Bodner, C. Hofer, A. Landefeld, H. Leitner, C. Turk, M.A. Nielsen, A.G. Demir, B. Previtali, J. Keckes, R. Schnitzer
    Acta Mater., 225, ARTN 117570 (2022)
  • High virucidal potential of novel ceramic-metal composites fabricated via hybrid selective laser melting and spark plasma sintering routes
    Rahmani R., K. Molan, M. Brojan, K. Prashanth, D. Stopar
    Int. J. Adv. Manuf. Technol., 2022, ARTN 8878 (2022)
  • Effect of supporting electrolyte on capacitance and morphology of electrodeposited poly(3,4-propylenedioxythiophene) derivatives bearing reactive functional groups
    Sarac B., T. Karazehir, H.-D. Gilsing, J. Eckert, A.S. Sarac
    Mol. Syst. Des. Eng., 460, 460-479 (2022)
  • Influence of interlayers on the interfacial behavior of Ag films on polymer substrates
    Cordill M., M. Paulitsch, C. Katsarelis, B. Putz, A. Lassnig, M. Kennedy
    Thin Solid Films, 742, ARTN 139051 (2022)
  • Selective Laser Melting of Commercially Pure Molybdenum by Laser Rescanning
    Alinejadian N., P. Wang, L. Kollo, K.G. Prashanth
    3D Print. Addit. Manuf., 123, 1-7 (2022)
  • Cementite decomposition in 100Cr6 bearing steel during high-pressure torsion: Influence of precipitate composition, size, morphology and matrix hardness
    Kiranbabu S., P.-Y. Tung, L. Sreekala, T.S. Prithiv, T. Hickel, R. Pippan, L. Morsdorf, M. Herbig
    Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 833, ARTN 142372 (2022)
  • Laser additive manufacturing of nano-TiC particles reinforced CoCrFeMnNi high-entropy alloy matrix composites with high strength and ductility
    Chen H., T. Lu, Y. Wang, Y. Liu, T. Shi, K. Prashanth, K. Kosiba
    Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 833, ARTN 142512 (2022)
  • Precipitation behavior of a Co-free Fe-Ni-Cr-Mo-Ti-Al maraging steel after severe plastic deformation
    Zeisl S., A. Lassnig, A. Hohenwarter, F. Mendez-Martin
    Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 833, ARTN 142416 (2022)
  • Microstructure-dependent phase stability and precipitation kinetics in equiatomic CrMnFeCoNi high-entropy alloy: Role of grain boundaries
    Daniel R., J. Zalesak, I. Matko, W. Baumegger, A. Hohenwarter, E.P. George, J. Keckes
    Acta Mater., 223, ARTN 117470 (2022)
  • Fabrication of Al/Mg Bimetallic Thin-Walled Ultrafine-Grained Tube by Severe Plastic Deformation
    Hosseini S.M., M. Roostaei, M. Mosavi Mashhadi, H. Jabbari, G. Faraji
    J. Mater. Eng. Perform., 021, ARTN 06514-5 (2022)
  • Evolution of Microstructure and Mechanical Properties of LM25-HEA Composite Processed through Stir Casting with a Bottom Pouring System
    Chinababu M., N. Naga Krishna, K. Sivaprasad, K.G. Prashanth, E. Bhaskara Rao
    MATERIALS, 15, ARTN 230 (2022)
  • Electron Back Scatter Diffraction and Synchrotron X-Ray Peak Profile Analysis as Tools for Microstructural Characterization of Large Strain Work Hardened Metals
    Hebesberger T., E. Schafler, M. Zehetbauer, R. Pippan, T. Ungar, S. Bernstorff
    Int. J. Mater. Res., 92, 410-416 (2022)
  • Annealing metallic glasses above T-g in order to accelerate the relaxation process in molecular dynamics simulations
    Sopu D., X. Yuan, J. Eckert
    Appl. Phys. Lett., 120, ARTN 011904 (2022)
  • Selective Laser Melting of TiC-Fe via Laser Pulse Shaping: Microstructure and Mechanical Properties
    Maurya H.S., L. Kollo, M. Tarraste, K. Juhani, F. Sergejev, K.G. Prashanth
    3D Print. Addit. Manuf., 4, 57-63 (2021)
  • Iron-rich talc as air-stable platform for magnetic two-dimensional materials
    Matkovic A., L. Ludescher, O. Peil, A. Sharma, K. Gradwohl, M. Kratzer, M. Zimmermann, J. Genser, D. Knez, E. Fisslthaler, C. Gammer, A. Lugstein, R. Bakker, L. Romaner, D. Zahn, F. Hofer, G. Salvan, J. Raith, C. Teichert
    NPJ 2D MATERIALS AND APPLICATIONS, 5, ARTN 94 (2021)
  • Mechanism of cementite decomposition in 100Cr6 bearing steels during high pressure torsion
    Qin Y., D. Mayweg, P. Tung, R. Pippan, M. Herbig
    Acta Mater., 201, 79-93 (2021)
  • Grain boundary segregation in Ni-base alloys: A combined atom probe tomography and first principles study
    Ebner A., S. Jakob, H. Clemens, R. Pippan, V. Maier-Kiener, S. He, W. Ecker, D. Scheiber, V. Razumovskiy
    Acta Mater., 221, ARTN 117354 (2021)
  • Effect of cold rolling on the pressure coefficient of glass transition temperature in bulk metallic glasses
    Jana P., J. Eckert, J. Das
    Thermochim. Acta, 706, ARTN 179071 (2021)
  • Investigating the Structure, Microstructure, and Texture in Selective Laser-Melted Sterling Silver 925
    Vikram R.J., L. Kollo, K.G. Prashanth, S. Suwas
    Metall. Mater. Trans. A-Phys. Metall. Mater. Sci., 52, 5329-5341 (2021)
  • Rapid solidification and metastable phase formation during surface modifications of composite Al-Cr cathodes exposed to cathodic arc plasma
    Golizadeh M., F. Martin, S. Wurster, J. Mogeritsch, A. Kharicha, S. Kolozsvari, C. Mitterer, R. Franz
    J. Mater. Sci. Technol., 94, 147-163 (2021)
  • Strain-hardening properties of the high-entropy alloy MoNbTaTiVZr processed by high-pressure torsion
    Duan C., M. Reiberg, P. Kutlesa, X. Li, R. Pippan, E. Werner
    Continuum Mech. Thermodyn., 21, ARTN 01065-5 (2021)
  • Porosity and thickness effect of Pd-Cu-Si metallic glasses on electrocatalytic hydrogen production and storage
    Sarac B., T. Karazehir, E. Yuece, M. Muehlbacher, A.S. Sarac, J. Eckert
    Mater. Des., 210, ARTN 110099 (2021)
  • Microstructure and mechanical properties of NiTi-SS bimetallic structures built using Wire Arc Additive Manufacturing
    Singh S., A.N. Jinoop, I.A. Palani, C.P. Paul, K.P. Tomar, K.G. Prashanth
    Mater. Lett., 303, ARTN 130499 (2021)
  • In Vitro Corrosion Behavior of Selective Laser Melted Ti-35Nb-7Zr-5Ta
    Ummethala R., J. Jayaraj, P.S. Karamched, S. Rathinavelu, N. Singh, K. Surreddi, K.G. Prashanth
    J. Mater. Eng. Perform., 30, 7967-7978 (2021)
  • Synergistic Effect of Ni and Co Alloying on Corrosion Behavior of Fe(Ni,Co)P13C7 Metallic Glasses in 1M NaCl Solution
    Sarac B.
    Int. J. Electrochem. Sci., 16, ARTN 211256 (2021)
  • Direct observation of nanocrystal-induced enhancement of tensile ductility in a metallic glass composite
    Gammer C., C. Rentenberger, D. Beitelschmidt, A. Minor, J. Eckert
    Mater. Des., 209, ARTN 109970 (2021)
  • Dissimilar welding of high-entropy alloy to Inconel 718 superalloy for structural applications
    Sokkalingam R., B. Pravallika, K. Sivaprasad, V. Muthupandi, K.G. Prashanth
    J. Mater. Res., 2021, ARTN 352 (2021)
  • Influence of high pressure torsion on microstructure evolution and mechanical properties of AZ80/SiC magnesium matrix composites
    Akbaripanah F., M. Sabbaghian, N. Fakhar, P. Minarik, J. Vesely, P.T. Hung, G. Kapoor, O. Renk, K. Mathis, J. Gubicza, J. Eckert
    Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 826, ARTN 141916 (2021)
  • SHAPING A COMMUNITY: THE IMPACT OF THE MATERIALS PROCESSING & MANUFACTURING DIVISION
    Calva K., D. Bourell, M. Cordill, M. Stoudt
    JOM, 2021, ARTN 04931-4 (2021)
  • Ti6Al7Nb-based TiB-reinforced composites by selective laser melting
    Singh N., S. Acharya, K.G. Prashanth, K. Chatterjee, S. Suwas
    J. Mater. Res., 36, 3691-3700 (2021)
  • Investigation on microstructure and texture evolution of Ti-6Al-3Nb-2Zr-1Mo alloy during hot deformation
    Lu L., Y. Zhang, Z. Zhang, K. Song, S. Li, Y. Li, F. Zhou, Q. Cao, Q. Feng, B. Zhang
    MATERIALS RESEARCH EXPRESS, 8, ARTN 096520 (2021)
  • Improved fracture resistance of Cu/Mo bilayers with thickness tailoring
    Cordill M., T. Joerg, D. Toebbens, C. Mitterer
    Scr. Mater., 202, ARTN 113994 (2021)
  • Nanocrystalline FeCr alloys synthesised by severe plastic deformation-A potential material for exchange bias and enhanced magnetostriction
    Weissitsch L., S. Wurster, A. Paulischin, M. Stückler, R. Pippan, A. Bachmaier
    J. Magn. Magn. Mater., 534, ARTN 168017 (2021)
  • Assessment of grain boundary cohesion of technically pure and boron micro-doped molybdenum via meso-scale three-point-bending experiments
    Jakob S., A. Hohenwarter, A. Lorich, W. Knabl, R. Pippan, H. Clemens, V. Maier-Kiener
    Mater. Des., 207, ARTN 109848 (2021)
  • Enhancement of Interfacial Hydrogen Interactions with Nanoporous Gold-Containing Metallic Glass
    Sarac B., Y. Ivanov, M. Micusik, T. Karazehir, B. Putz, S. Dancette, M. Omastova, A. Greer, A. Sarac, J. Eckert
    ACS Appl. Mater. Interfaces, 13, 42613-42623 (2021)
  • Cryo-Casting for Controlled Decomposition of Cu-Zr-Al Bulk Metallic Glass into Nanomaterials: Implications for Design Optimization
    Sarac B., J. Kim, Y. Ivanov, V. Soprunyuk, S. Ketov, W. Schranz, S. Hong, K. Kim, A. Greer, J. Eckert
    ACS APPLIED NANO MATERIALS, 4, 7771-7780 (2021)
  • First-principles calculations to investigate pressure effect on mechanical and thermal properties of ZrAl2
    Tang M., Z.C. Rong, F.X. Li, J.H. Yi, J. Eckert, Y.C. Liu
    Comput. Theor. Chem., 1202, ARTN 113304 (2021)
  • Mechanochemical Synthesis of Rosin-Modified Montmorillonite: A Breakthrough Approach to the Next Generation of OMMT/Rubber Nanocomposites
    Esmaeili E., S. Rounaghi, J. Eckert
    NANOMATERIALS, 11, ARTN 1974 (2021)
  • Influence of substructures on the selective laser melted Ti-6Al-4V alloy as a function of laser re-melting
    Karimi J., M.S. Xie, Z. Wang, K.G. Prashanth
    J. Manuf. Process., 68, 1387-1394 (2021)
  • Effect of Interlayer Delay on the Microstructure and Mechanical Properties of Wire Arc Additive Manufactured Wall Structures
    Singh S., A. Jinoop, G. Tarun Kumar, I. Palani, C. Paul, K. Prashanth
    MATERIALS, 14, ARTN 4187 (2021)
  • Biomorphic porous Ti6Al4V gyroid scaffolds for bone implant applications fabricated by selective laser melting
    Hameed P., C. Liu, R. Ummethala, N. Singh, H. Huang, G. Manivasagam, K. Prashanth
    PROGRESS IN ADDITIVE MANUFACTURING, 6, 455-469 (2021)
  • Effective Methanol Oxidation with Platinum Nanoparticles-Decorated Poly(2-bromomethyl-2-methyl-3,4-propylenedioxythiophene)-Coated Glassy Carbon Electrode
    Karazehir T., B. Sarac, H. Gilsing, J. Eckert, A. Sarac
    J. Electrochem. Soc., 168, ARTN 086503 (2021)
  • Atomic diffusivities in amorphous and liquid Cu-Zr: Kirkendall effects and dependence on packing density
    Ketov S., Y.P. Ivanov, B. Putz, Z. Zhang, J. Eckert, A.L. Greer
    Acta Mater., 214, ARTN 116993 (2021)
  • Copper and its effects on microstructure and correlated tensile properties of super duplex stainless steels
    Ressel G., M. Gsellmann, D. Brandl, A. Landefeld, A. Keplinger, Z.L. Zhang, V. Maier-Kiener, R. Schnitzer
    Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 821, ARTN 141544 (2021)
  • Mechanisms controlling fracture toughness of additively manufactured stainless steel 316L
    Kumar D., S. Jhavar, A. Arya, K.G. Prashanth, S. Suwas
    Int. J. Fract., 2021, ARTN 574-3 (2021)
  • Hardness and failure assessment of a hot extrusion punch during service
    Zhang Y., K. Song, S. Zhang, Y. Wang, Z. Zhang
    Eng. Fail. Anal., 125, ARTN 105382 (2021)
  • Selective Laser Melting of Al-7Si-0.5 Mg-0.5Cu: Effect of Heat Treatment on Microstructure Evolution, Mechanical Properties and Wear Resistance
    Wang P., S. Yu, J. Shergill, A. Chaubey, J. Eckert, K. Prashanth, S. Scudino
    Acta Metall. Sin.-Engl. Lett., 21, ARTN 01279 (2021)
  • Texture dependent strain hardening in additively manufactured stainless steel 316L
    Kumar D., G. Shankar, K.G. Prashanth, S. Suwas
    Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 820, ARTN 141483 (2021)
  • Influence of Gradient Residual Stress and Tip Shape on Stress Fields Inside Indented TiN Hard Coating
    Todt J., J. Zalesak, C. Krywka, J. Keckes
    Adv. Eng. Mater., 2021, ARTN 2100130 (2021)
  • Mechanical spectroscopy of metal/polymer composite membranes for hydrogen separation
    Zadorozhnyy V., V. Soprunyuk, S. Klyamkin, M. Zadorozhnyy, E. Berdonosova, I. Savvotin, A. Stepashkin, A. Korol, A. Kvaratskheliya, D. Semenov, J. Eckert, S.D. Kaloshkin
    J. Alloy. Compd., 866, ARTN 159014 (2021)
  • Powder Diffraction Data of Aluminum-Rich FCC-Ti1-xAlxN Prepared by CVD
    Endler I., M. Hoehn, B. Matthey, J. Zalesak, J. Keckes, R. Pitonak
    COATINGS, 11, ARTN 683 (2021)
  • Spark plasma sintering of Ti6Al4V metal matrix composites: Microstructure, mechanical and corrosion properties
    Singh N., R. Ummethala, P. Karamched, R. Sokkalingam, V. Gopal, G. Manivasagam, K. Prashanth
    J. Alloy. Compd., 865, ARTN 158875 (2021)
  • On the behavior of rhenium under high-pressure torsion at room temperature
    Panfilov P., T.P. Tolmachev, V.P. Pilyugin, Z. Chen, Z.L. Zhang
    Mater. Lett., 292, ARTN 129634 (2021)
  • Origin of Electrocatalytic Activity in Amorphous Nickel-Metalloid Electrodeposits
    Sarac B., T. Karazehir, M. Micusik, C. Halkali, D. Gutnik, M. Omastova, A.S. Sarac, J. Eckert
    ACS Appl. Mater. Interfaces, 13, 23689-23701 (2021)
  • Properties of HPT-Processed Large Bulks of p-Type Skutterudite DD0.7Fe3CoSb12 with ZT > 1.3
    Rogl G., O. Renk, S. Ghosh, R. Mallik, A. Grytsiv, J. Bursik, E. Schafler, F. Tuomisto, .E. Bauer, P. Rogl
    ACS Appl. Energ. Mater., 4, 4831-4844 (2021)
  • Electrospun polyacrylonitrile/2-(acryloyloxy)ethyl ferrocenecarboxylate polymer blend nanofibers
    Gumrukcu S., V. Soprunyuk, B. Sarac, E. Yuece, J. Eckert, A.S. Sarac
    Mol. Syst. Des. Eng., 1, 1 (2021)
  • Spark plasma sintering of molybdenum silicides synthesized from oxide precursors
    Ovali D., M. Tarraste, M. Kaba, D. Agaogullari, L. Kollo, K.G. Prashanth, M. Ovecoglu
    Ceram. Int., 47, 13827-13836 (2021)
  • Atomistic understanding of creep and relaxation mechanisms of Cu64Zr36 metallic glass at different temperatures and stress levels
    Wu W., D. Sopu, X. Yuan, O. Adjaoud, K.K. Song, J. Eckert
    J. Non-Cryst. Solids, 559, ARTN 120676 (2021)
  • Additive Manufacturing of Aluminum-Based Metal Matrix Composites-A Review
    Tang S., R. Ummethala, C. Suryanarayana, J. Eckert, K. Prashanth, Z. Wang
    Adv. Eng. Mater., 2021, ARTN 2100053 (2021)
  • Microstructural evolution and mechanical properties of selective laser melted Ti-6Al-4V induced by annealing treatment
    Pei W., F. Chen, J. Eckert, S. Pilz, S. Scudino, K.G. Prashanth
    J. Cent. South Univ., 28, 1068-1077 (2021)
  • Origin of strain hardening in monolithic metallic glasses
    Yuan X., D. Sopu, J. Eckert
    Phys. Rev. B, 103, ARTN L140107 (2021)
  • Self-Reducing Silver Ink on Polyurethane Elastomers for the Manufacture of Thin and Highly Stretchable Electrical Circuits
    Krawczyk K.K., J. Groten, O. Glushko, M. Krivec, M. Fruehwirth, G. Schulz, C. Wolf, D. Hartmann, M. Moser, M.J. Cordill, B. Stadlober, T. Griesser
    Chem. Mat., 33, 2742-2755 (2021)
  • Influence of high-pressure torsion deformation on the corrosion behaviour of a bioresorbable Mg-based alloy studied by positron annihilation
    Brunner P., F. Brumbauer, E. Steyskal, O. Renk, A. Weinberg, H. Schroettner, R. Wuerschum
    Biomater. Sci., 2021, ARTN: 00166c (2021)
  • A universal criterion for the failure threshold in slowly sheared bulk metallic glasses
    Luo Y.S., Z. Wang, J. Eckert, J.W. Qiao
    J. Appl. Phys., 129, ARTN 155109 (2021)
  • Annealing of Al-Zn-Mg-Cu Alloy at High Pressures: Evolution of Microstructure and the Corrosion Behavior
    Suo C., P. Ma, Y. Jia, X. Liu, X. Shi, Z. Yu, K. Prashanth
    MATERIALS, 14, ARTN 2076 (2021)
  • The formation of TiO2/VO2 multilayer structure via directional cationic diffusion
    Zheng Y., Z. Chen, H. Lu, Y. Cheng, X. Chen, Y. He, Z. Zhang
    Nanoscale, 13, 7783-7791 (2021)
  • Griffith's Legacy to Alloy Design and Beyond
    Gerberich W.W., M.J. Cordill, J.W. Carter
    JOM, 2021, ARTN 4667-1 (2021)
  • Influence of Microalloying Elements and Deformation Parameters on the Recrystallization and Precipitation Behavior of Two Low-Alloyed Steels
    Monschein S., M. Kapp, D. Zugner, J. Fasching, A. Landefeld, R. Schnitzer
    Steel Res. Int., 2021, ARTN 2100065 (2021)
  • Effect of Pressure and Temperature on Microstructure of Self-Assembled Gradient AlxTi1-xN Coatings
    Zalesak J., J. Todt, J. Michalicka, B. Sartory, I. Matko, M. Lessiak, M. Traxler, R. Weissenbacher, R. Pitonak, C. Gammer, J. Keckes
    COATINGS, 11, ARTN 416 (2021)
  • Tailoring Extra-Strength of a TWIP Steel by Combination of Multi-Pass Equal-Channel Angular Pressing and Warm Rolling
    Abramova M., A. Raab, R. Valiev, A. Khannanova, C. Lee, J. Kim, G. Jang, J. Kim, H. Kim, O. Renk, N. Enikeev
    METALS, 11, ARTN 518 (2021)
  • Synthesis of bulk reactive Ni-Al composites using high pressure torsion
    Renk O., M. Tkadletz, N. Kostoglou, I. Gunduz, K. Fezzaa, T. Sun, A. Stark, C. Doumanidis, J. Eckert, R. Pippan, C. Mitterer, C. Rebholz
    J. Alloy. Compd., 857, ARTN 157503 (2021)
  • Phase Formation, Microstructure and Mechanical Properties of Mg67Ag33 as Potential Biomaterial
    Kosiba K., K. Prashanth, S. Scudino
    METALS, 11, ARTN 461 (2021)
  • Functionalized highly electron-rich redox-active electropolymerized 3,4-propylenedioxythiophenes as precursors and targets for bioelectronics and supercapacitors
    Karazehir T., B. Sarac, H. Gilsing, S. Gumrukcu, J. Eckert, A. Sarac
    Mol. Syst. Des. Eng., 6, 214-233 (2021)
  • Improved electro-mechanical reliability of flexible systems with alloyed Mo-Ta adhesion layers
    Kreiml P., M. Rausch, L. Terziyska, H. Koestenbauer, J. Winkler, C. Mitterer, M. Cordill
    Thin Solid Films, 720, ARTN 138533 (2021)
  • Correlation between internal states and creep resistance in metallic glass thin films
    Li M., J. Tan, X.M. Qin, D.H. Lu, Z.X. Feng, C.J. Li, S.V. Ketov, M. Calin, J. Eckert
    J. Appl. Phys., 129, ARTN 085302 (2021)
  • Influence of cold rolling on the fatigue crack growth behavior of tungsten
    Pillmeier S., S. Zak, R. Pippan, A. Hohenwarter
    Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 805, ARTN 140791 (2021)
  • X-ray Diffraction Computed Nanotomography Applied to Solve the Structure of Hierarchically Phase-Separated Metallic Glass
    Stoica M., B. Sarac, F. Spieckermann, J. Wright, C. Gammer, J. Han, P. Gostin, J. Eckert, J. Loeffler
    ACS Nano, 15, 2386-2398 (2021)
  • Selective laser melting of Ti6Al4V: Effect of laser re-melting
    Karimi J., C. Suryanarayana, I. Okulov, K.G. Prashanth
    Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 805, ARTN 140558 (2021)
  • Geometrical model for calculating the effect of surface morphology on total x-ray output of medical x-ray tubes
    Siller M., M. Minkkinen, P. Bogust, A. Jelinek, J. Schatte, N. Bostrom, K. Greenland, W. Knabl, H. Clemens, R. Pippan, V. Maier-Kiener
    Med. Phys., 2021, ARTN 14649 (2021)
  • Adhesion evaluation of thin films to dielectrics in multilayer stacks: A comparison of four-point bending and stressed overlayer technique
    Lassnig A., B. Putz, S. Hirn, D.M. Toebbens, C. Mitterer, M.J. Cordill
    Mater. Des., 200, ARTN 109451 (2021)
  • Effect of alloying elements on hydrogen enhanced decohesion in bcc iron
    Kholtobina A., W. Ecker, R. Pippan, V. Razumovskiy
    Comput. Mater. Sci., 188, ARTN 110215 (2021)
  • Optimization of Mechanical Properties and Damage Tolerance in Polymer-Mineral Multilayer Composites
    Wiener J., H. Kaineder, O. Kolednik, F. Arbeiter
    MATERIALS, 14, ARTN 725 (2021)
  • The Impact Resistance of Highly Densified Metal Alloys Manufactured from Gas-Atomized Pre-Alloyed Powders
    Rahmani R., M. Antonov, K. Prashanth
    COATINGS, 11, ARTN 216 (2021)
  • The S-content-dependent lattice structure evolution and bandgap modulation in quaternary MgZnOS alloy films
    Cheng H., L. Li, Y. Wang, Y. Lu, Z. Zhang, M. Li, J. Klar, Y. He
    J. Phys. D-Appl. Phys., 54, ARTN 065104 (2021)
  • Direct determination of the area function for nanoindentation experiments
    Saringer C., M. Tkadletz, M. Kratzer, M. Cordill
    J. Mater. Res., 37, ARTN: 43578 (2021)
  • High entropy alloy nanocomposites produced by high pressure torsion
    Taheriniya S., F. Davani, S. Hilke, M. Hepp, C. Gadelmeier, M. Chellali, T. Boll, H. Rosner, M. Peterlechner, C. Gammer, S. Divinski, B. Butz, U. Glatzel, H. Hahn, G. Wilde
    Acta Mater., 208, ARTN 116714 (2021)
  • Stress intensity factor for w-shape tension specimens
    Kolitsch S., M. Jan, H. Gaenser, O. Kolednik
    Eng. Fract. Mech., 242, ARTN 107478 (2021)
  • Microstructural Effects on the Interfacial Adhesion of Nanometer-Thick Cu Films on Glass Substrates: Implications for Microelectronic Devices
    Lassnig A., V. Terziyska, J. Zalesak, T. Joerg, D. Toebbens, T. Griesser, C. Mitterer, R. Pippan, M. Cordill
    ACS APPLIED NANO MATERIALS, 4, 61-70 (2021)
  • Composite of medium entropy alloys synthesized using spark plasma sintering
    Chawake N., L. Raman, P. Ramasamy, P. Ghosh, F. Spieckermann, C. Gammer, B.S. Murty, R. Kottada, J. Eckert
    Scr. Mater., 191, 46-51 (2021)
  • Stress-strain behavior and microstructural evolution of ultra-high carbon Fe-C-Cr-V-Mo steel subjected to hot deformation
    Wang R., W. Zhang, Y. Li, D. Li, Y. Kang, X. Yang, J. Eckert, Z. Yan
    Mater. Charact., 171, ARTN 110746 (2021)
  • Core-shell structured NiCo2O4@Ni(OH)(2) nanomaterials with high specific capacitance for hybrid capacitors
    Zhao R., D. Cui, H. Sheng, C. Gammer, F. Wu, J. Xiang
    Ionics, ARTN 03817 (2021)
  • Influence of the nitrogen content on the structure and properties of MoNbTaVW high entropy alloy thin films
    Xia A., R. Dedoncker, O. Glushko, M. Cordill, D. Depla, R. Franz
    J. Alloy. Compd., 850, ARTN 156740 (2021)
  • Controlling the high temperature deformation behavior and thermal stability of ultra-fine-grained W by re alloying
    Kappacher J., O. Renk, D. Kiener, H. Clemens, V. Maier-Kiener
    J. Mater. Res., 1, ARTN: 43578 (2021)
  • Microstructure, strength and fracture toughness of CuNb nanocomposites processed with high pressure torsion using multi-sector disks
    Hohenwarter A.
    Scr. Mater., 189, 48-52 (2020)
  • Influence of combinatorial annealing and plastic deformation treatments on the intrinsic properties of Cu46Zr46Al8 bulk metallic glass
    Rezvan A., B. Sarac, V. Soprunyuk, J.T. Kim, K.K. Song, C.J. Li, W. Schranz, J. Eckert
    Intermetallics, 127, ARTN 106986 (2020)
  • Two-dimensional SnO ultrathin epitaxial films: Pulsed laser deposition growth and quantum confinement effects
    Chen J., L. Zheng, W. Yin, M. Zhang, Y. Lu, P. Klar, M. Li, Y. He
    Physica B, 599, ARTN 412467 (2020)
  • Selective laser melting of high-strength, low-modulus Ti-35Nb-7Zr-5Ta alloy
    Ummethala R., P.S. Karamched, S. Rathinavelu, N. Singh, A. Aggarwal, K. Sun, E. Ivanov, L. Kollo, I. Okulov, J. Eckert, K.G. Prashanth
    MATERIALIA, 14, ARTN 100941 (2020)
  • Phase change memory based on Ta-Sb-Te alloy -Towards a universal memory
    Xue Y., Y. Cheng, Y. Zheng, S. Yan, W. Song, S. Lv, S. Song, Z. Song
    MATERIALS TODAY PHYSICS, 15, ARTN 100266 (2020)
  • Effective electrocatalytic methanol oxidation of Pd-based metallic glass nanofilms
    Sarac B., T. Karazehir, Y. Ivanov, B. Putz, A. Greer, A. Sarac, J. Eckert
    Nanoscale, 12, 22586-22595 (2020)
  • In situ high-energy X-ray diffraction study of thermally -activated martensitic transformation far below room temperature in CuZr-based bulk metallic glass composites
    Song K., S. Wu, I. Kaban, M. Stoica, J. Bednarcik, B. Sun, C. Cao, G. Wang, L. Wang, J. Eckert
    J. Alloy. Compd., 841, ARTN 155781 (2020)
  • A new approach to evaluate the elastic modulus of metallic foils
    Trost C.O.W., S. Wurster, C. Freitag, A. Steinberger, M.J. Cordill
    Mater. Des., 196, ARTN 109149 (2020)
  • The role of crystallographic texture on mechanically induced grain boundary migration
    Renk O., P. Ghosh, R.K. Sabat, J. Eckert, R. Pippan
    Acta Mater., 200, 404-416 (2020)
  • Strain Induced Anisotropic Magnetic Behaviour and Exchange Coupling Effect in Fe-SmCo5 Permanent Magnets Generated by High Pressure Torsion
    Weissitsch L., M. Stückler, S. Wurster, P. Knoll, H. Krenn, R. Pippan, A. Bachmaier
    Crystals, 10, ARTN 1026 (2020)
  • Surface oxidation of nanocrystalline CVD TiB2 hard coatings revealed by cross-sectional nano-analytics and in-situ micro-cantilever testing
    Gruber D., J. Zalesak, J. Todt, M. Tkadletz, B. Sartory, J. Suuronen, T. Ziegelwanger, C. Czettl, C. Mitterer, J. Keckes
    Surf. Coat. Technol., 399, ARTN 126181 (2020)
  • Nanoindentation and microbending analyses of glassy and crystalline Zr (-Hf)-Cu thin-film alloys
    Haviar S., T. Kozak, M. Meindlhumer, M. Zitek, K. Opatova, L. Kucerova, J. Keckes, P. Zeman
    Surf. Coat. Technol., 399, ARTN 126139 (2020)
  • Nanoscale stress distributions and microstructural changes at scratch track cross-sections of a deformed brittle-ductile CrN-Cr bilayer
    Meindlhumer M., J. Zalesak, W. Ecker, M. Rosenthal, S. Niese, P. Gawlitza, H. Hruby, C. Mitterer, R. Daniel, J. Keckes, J. Todt
    Mater. Des., 195, ARTN 109023 (2020)
  • Selective Laser Melting of Aluminum and Its Alloys
    Wang Z., R. Ummethala, N. Singh, S. Tang, C. Suryanarayana, J. Eckert, K. Prashanth
    MATERIALS, 13, ARTN 4564 (2020)
  • Nd3+ ions induced rational morphology control of transition metal oxides for high energy storage performance
    Hu H., H. Cheng, K. Song, S. Dai, Y. Liu, H. Stock, Y. Yu, Z. Zhang, M. Liu
    J. Power Sources, 472, ARTN 228599 (2020)
  • Effect of Carbon in Severe Plastically Deformed Metals
    Bachmaier A., R. Pippan, O. Renk
    Adv. Eng. Mater., 22, ARTN 2000879 (2020)
  • Severe Plastic Deformation and Thermomechanical Processing: Nanostructuring and Properties
    Bachmaier A., T. Grosdidier, Y. Ivanisenko
    METALS, 10, ARTN 1306 (2020)
  • Intrinsic and extrinsic effects on the brittle-to-ductile transition in metallic glasses
    Yuan X., D. Sopu, F. Moitzi, K.K. Song, J. Eckert
    J. Appl. Phys., 128, ARTN 125102 (2020)
  • Effect of TiB(2)particle size on the material transfer behaviour of Cu-TiB(2)composites
    Guo X., K. Song, W. Xu, G. Li, Z. Zhang
    Mater. Sci. Technol., 36:15, 1685-1694 (2020)
  • Multi-scale interface design of strong and damage resistant hierarchical nanostructured materials
    Rostilav D., M. Meindlhumer, J. Zalesak, W. Baumegger, J. Todt, T. Ziegelwanger, J.F. Keckes, C. Mitterer, J. Keckes
    Mater. Des., 196, ARTN 109169 (2020)
  • Atomic-scale study on incoherent twin boundary evolution in nanograined Cu
    Zhang Y., J. Guo, W. Ming, J. Chen, Z. Zhang
    Scr. Mater., 186, 278-281 (2020)
  • In-operando fatigue behavior of gold metallization lines on polyimide substrate
    Glushko O., M.J. Cordill
    Scr. Mater., 186, 48-51 (2020)
  • Thermal stabilization of metal matrix nanocomposites by nanocarbon reinforcements
    Bachmaier A., A. Katzensteiner, S. Wurster, K. Aristizabal, S. Suarez, R. Pippan
    Scr. Mater., 186, 202-207 (2020)
  • Fracture properties of thin film TiN at elevated temperatures
    Buchinger J., L. Loefler, J. Ast, A. Wagner, Z. Chen, J. Michler, Z.L. Zhang, P.H. Mayrhofer, D. Holec, M. Bartosik
    Mater. Des., 194, ARTN 108885 (2020)
  • Verification of the generalised chemical potential for stress-driven hydrogen diffusion in nickel
    Drexler A., S. He, V. Razumovskiy, L. Romaner, W. Ecker, R. Pippan
    Philos. Mag. Lett., 2020, ARTN 1808253 (2020)
  • EBSD characterization of pure and K -doped tungsten fibers annealed at different temperatures
    Tanure L., D. Terentyev, V. Nikolic, J. Riesch, K. Verbeken
    J. Nucl. Mater., 537, UNSP 152201 (2020)
  • Atomic -scale investigation on the structural evolution and deformation behaviors of Cu-Cr nanocrystalline alloys processed by high-pressure torsion
    Shao Q., J. Guo, J. Chen, Z. Zhang
    J. Alloy. Compd., 832, ARTN 154994 (2020)
  • Influence of TiO 2 charge and BSA -metal ion complexation on retention of Cr (VI) in ultrafiltration process
    Nayak V., K. Soontarapa, R. Balakrishna, M. Padaki, V.Y. Zadorozhnyy, S.D. Kaloshkin
    J. Alloy. Compd., 832, ARTN 153986 (2020)
  • Balancing the electro-mechanical and interfacial performance of Mo-based alloy films
    Kreiml P., M. Rausch, V. Terziyska, H. Koestenbauer, J. Winkler, C. Mitterer, M. Cordill
    MATERIALIA, 12, ARTN 100774 (2020)
  • Thermomechanical and structural characterization of polybutadiene/poly(ethylene oxide)/CNT stretchable electrospun fibrousmembranes
    Gurbuz R., B. Sarac, V. Soprunyuk, E. Yuece, J. Eckert, A. Ozcan, A.S. Sarac
    Polym. Adv. Technol., 2020, 248-261 (2020)
  • Balancing the strength and ductility of graphene oxide-carbon nanotube hybrid reinforced aluminum matrix composites with bimodal grain distribution
    Xu Z.Y., C.J. Li, Z. Wang, D. Fang, P. Gao, J.M. Tao, J.H. Yi, J. Eckert
    Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 796, ARTN 140067 (2020)
  • Novel intermetallic-reinforced near-alpha Ti alloys manufactured by spark plasma sintering
    Wimler D., J. Lindemann, C. Gammer, P. Spoerk-Erdely, A. Stark, H. Clemens, S. Mayer
    Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 792, ARTN 139798 (2020)
  • Achieving work hardening by forming boundaries on the nanoscale in a Ti-based metallic glass matrix composite
    Fan J., W. Rao, J. Qiao, P.K. Liaw, D. Sopu, D. Kiener, J. Eckert, G. Kang, Y. Wu
    J. Mater. Sci. Technol., 50, 192-203 (2020)
  • Mapping the mechanical properties in nitride coatings at the nanometer scale
    Zhang Z., Z. Chen, D. Holec, C. Liebscher, N. Koutna, M. Bartosik, Y. Zheng, G. Dehm, P. Mayrhofer
    Acta Mater., 194, 343-353 (2020)
  • Metallic Glass Films with Nanostructured Periodic Density Fluctuations Supported on Si/SiO(2)as an Efficient Hydrogen Sorber
    Sarac B., Y. Ivanov, T. Karazehir, B. Putz, A.L. Greer, A. Sarac, J. Eckert
    Chem.-Eur. J., 26, 8244-8253 (2020)
  • Fatigue crack threshold analysis of TiAl SENT and CC specimens - Influence of starter notch and precracking
    Eck S., J. Maierhofer, C. Tritremmel, H.-P. Gaenser, S. Marsoner, N. Martin, R. Pippan
    Intermetallics, 121, ARTN 106770 (2020)
  • Extraordinary high-temperature behavior of electrically conductive Hf7B23Si22C6N40 ceramic film
    Zeman P., S. Zuzjakova, R. Cerstvy, J. Houska, Y. Shen, J. Todt, J. Jiang, R. Daniel, J. Keckes, E. Meletis I, J. Vlcek
    Surf. Coat. Technol., 391, ARTN 125686 (2020)
  • Effect of tempering and deep cryogenic treatment on microstructure and mechanical properties of Cr-Mo-V-Ni steel
    Yan Z., K. Liu, J. Eckert
    Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 787, ARTN 139520 (2020)
  • The Relationships of Microscopic Evolution to Resistivity Variation of a FIB-Deposited Platinum Interconnector
    Zhong C., R. Qi, Y. Zheng, Y. Cheng, W. Song, R. Huang
    MICROMACHINES, 11, ARTN 588 (2020)
  • Mechanical and optical degradation of flexible optical solar reflectors during simulated low earth orbit thermal cycling
    Putz B., S. Wurster, T.E.J. Edwards, B. Voelker, G. Milassin, D.M. Toebbens, C.O.A. Semprimoschnig, M.J. Cordill
    Acta Astronaut., 175, 277-289 (2020)
  • Microstructural evolution of W-10Re alloys due to thermal cycling at high temperatures and its impact on surface degradation
    Siller M., J. Schatte, S. Gerzoskovitz, W. Knabl, R. Pippan, H. Clemens, V. Maier-Kiener
    Int. J. Refract. Met. Hard Mat., 92, ARTN 105285 (2020)
  • Microscopic Mechanism of Carbon-Dopant Manipulating Device Performance in CGeSbTe-Based Phase Change Random Access Memory
    Cheng Y., D. Cai, Y. Zheng, S. Yan, L. Wu, C. Li, W. Song, T. Xin, S. Lv, R. Huang, H. Lv, Z. Song, S. Feng
    ACS Appl. Mater. Interfaces, 12, 23051-23059 (2020)
  • Hydrogen Trapping in bcc Iron
    Kholtobina A., R. Pippan, L. Romaner, D. Scheiber, W. Ecker, V. Razumovskiy
    MATERIALS, 13, ARTN 2288 (2020)
  • Temperature dependence of surface and grain boundary energies from first principles
    Scheiber D., O. Renk, M. Popov, L. Romaner
    Phys. Rev. B, 101, ARTN 174103 (2020)
  • High pressure torsion induced lowering of Young's modulus in high strength TNZT alloy for bio-implant applications
    Maity T., O. Balci, C. Gammer, E. Ivanov, J. Eckert, K.G. Prashanth
    J. Mech. Behav. Biomed. Mater., 108, UNSP 103839 (2020)
  • Synthesis of nanodiamond reinforced silver matrix nanocomposites: Microstructure and mechanical properties
    Katzensteiner A., J.M. Rosalie, R. Pippan, A. Bachmaier
    Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 782, ARTN 139254 (2020)
  • Premature failure of an additively manufactured material
    Wang Z., M.: Xie, Y. Li, W. Zhang, C. Yang, L. Kollo, J. Eckert, K. Prashanth
    NPG Asia Mater., 12, ARTN 30 (2020)
  • Microstructure, Texture, and Strength Development during High-Pressure Torsion of CrMnFeCoNi High-Entropy Alloy
    Skrotzki W., A. Pukenas, E. Odor, B. Joni, T. Ungar, B. Voelker, A. Hohenwarter, R. Pippan, E. George
    Crystals, 10, ARTN 336 (2020)
  • The effect of grain size on the fatigue overload behaviour of nickel
    Zhang W., C. Simpson, P. Lopez-Crespo, M. Mokhtarishirazabad, T. Buslaps, R. Pippan, P. Withers
    Mater. Des., 189, ARTN 108526 (2020)
  • Influence of WC-Co hard metal microstructure on defect density, initiation and propagation kinetics of fatigue cracks starting at intrinsic and artificial defects under a negative stress ratio
    Kluensner T., T. Lube, C. Gettinger, L. Walch, R. Pippan
    Acta Mater., 188, 30-39 (2020)
  • An SEM compatible plasma cell for in situ studies of hydrogen-material interaction
    Massone A., A. Manhard, W. Jacob, A. Drexler, W. Ecker, A. Hohenwarter, S. Wurster, D. Kiener
    Rev. Sci. Instrum., 91, ARTN 043705 (2020)
  • Open-cell tungsten nanofoams: Chloride ion induced structure modification and mechanical behavior
    Zhao M., M. Pfeifenberger, D. Kiener
    Results Phys., 17, ARTN 103062 (2020)
  • Oligoether Ester-Functionalized ProDOT Copolymers on Si/Monolayer Graphene as Capacitive Thin Film Electrodes
    Karazehir T., B. Sarac, H. Gilsing, J. Eckert, S. Sarac
    J. Electrochem. Soc., 167, ARTN 070543 (2020)
  • A Modified Electrochemical Nanoindentation Setup for Probing Hydrogen-Material Interaction Demonstrated on a Nickel-Based Alloy
    Ebner A., S. Brinckmann, E. Plesiutschnig, H. Clemens, R. Pippan, V. Maier-Kiener
    JOM, 72, 2020-2029 (2020)
  • Fatigue crack growth model including load sequence effects - Model development and calibration for railway axle steels
    Maierhofer J., H.-P. Gaenser, D. Simunek, M. Leitner, R. Pippan, M. Luke
    Int. J. Fatigue, 132, ARTN 105377 (2020)
  • Nanoscale evolution of stress concentrations and crack morphology in multilayered CrN coating during indentation: Experiment and simulation
    Ecker W., J. Keckes, M. Krobath, J. Zalesak, R. Daniel, M. Rosenthal, J. Todt
    Mater. Des., 188, ARTN 108478 (2020)
  • Metal flow behavior of P/M connecting rod preform in flashless forging based on isothermal compression and numerical simulation
    Li F., P. Chen, J. Han, L. Deng, J. Yi, Y. Liu, J. Eckert
    J. Mater. Res. Technol-JMRT, 9, 1200-1209 (2020)
  • Strain perceptibility of elements on the diffusion in Zr-based amorphous alloys
    Lee A.Y., S.Y. Kim, H. Jang, Y.D. Kim, F. Spieckermann, G. Wilde, J. Eckert, M.H. Lee
    Sci Rep, 10, ARTN 4575 (2020)
  • Study on Ca Segregation toward an Epitaxial Interface between Bismuth Ferrite and Strontium Titanate
    Haselmann U., G. Haberfehlner, W. Pei, M. Popov, L. Romaner, D. Knez, J. Chen, A. Ghasemi, Y. He, G. Kothleitner, Z. Zhang
    ACS Appl. Mater. Interfaces, 12, 12264-12274 (2020)
  • Fatigue crack growth in full-scale railway axles - Influence of secondary stresses and load sequence effects
    Rieger M., C. Moser, P. Brunnhofer, D. Simunek, F. Weber, A. Deisl, H. Gaenser, R. Pippan, N. Enzinger
    Int. J. Fatigue, 132, ARTN 105360 (2020)
  • Probing defect relaxation in ultra-fine grained Ta using micromechanical spectroscopy
    Alfreider M., I. Issa, O. Renk, D. Kiener
    Acta Materialia, 185, 309-319 (2020)
  • Non-destructive Testing of Thin Birch (Betula pendula Roth.) Veneers
    Pramreiter M., A. Stadlmann, F. Linkeseder, J. Keckes, U. Mueller
    BioResources, 15, 1265-1281 (2020)
  • Stability, elasticity and electronic structures of Co-Zr binary intermetallic compounds
    Li K., W. Lu, C. Li, D. Sopu, B. Sarac, J.H. Yi, J. Tan, P. Gao, J. Eckert
    Philos. Mag., 2020, ISSN 1478-6435 (2020)
  • The effect of anisotropic microstructure on the crack growth and fatigue overload behaviour of ultrafine-grained nickel
    Zhang W., C.A. Simpson, T. Leitner, X. Zhang, R. Pippan, P.J. Withers
    Acta Mater., 184, 225-240 (2020)
  • Sputter deposition of NiW films from a rotatable target
    Rausch M., M. Golizadeh, P. Kreiml, M. Cordill, J. Winkler, C. Mitterer
    Appl. Surf. Sci., 511, ARTN 145616 (2020)
  • Ageing Behaviour of Al-Mg-Si Alloys After Cryogenic and Room Temperature Deformation
    Gruber B., F. Grabner, W. Fragner, A. Schökel, F. Spieckermann, P. Uggowitzer, S. Pogatscher
    materials, 13, ARTN 13030554 (2020)
  • Angular resolved mass-energy analysis of species emitted from a dc magnetron sputtered NiW-target
    Rausch M., S. Mraz, P. Kreiml, M. Cordill, J. Schneider, J. Winkler, C. Mitterer
    J. Vac. Sci. Technol. A, 38, ARTN 023401 (2020)
  • Microstructural evolution during heating of CNT/Metal Matrix Composites processed by Severe Plastic Deformation
    Aristizabal K., A. Katzensteiner, A. Bachmaier, F. Muecklich, S. Suarez
    Sci Rep, 10:857, ARTN 57946-3 (2020)
  • Magnetic dilution by severe plastic deformation
    Stückler M., L. Weissitsch, S. Wurster, P. Felfer, H. Krenn, R. Pippan, A. Bachmaier
    AIP Advances, 10, ARTN 015210 (2020)
  • 4-aminophenyl sulfone (APS) as novel monomer in fabricating paper based TFC composite for forward osmosis: Selective layer optimization
    Nayak V., J. MS, R. Balakrishna, M. Padaki, V. Zadorozhnyy, S. Kaloshkin
    Journal of Environmental Chemical Engineering, 8, ARTN 103664 (2020)
  • Microstructures, Mechanical Properties, and Corrosion Behaviors of Refractory High-Entropy ReTaWNbMo Alloys
    Yan D., K. Song, H. Sun, S. Wu, K. Zhao, H. Zhang, S. Yuan, J. Kim, N. Chawake, O. Renk, A. Hohenwarter, L. Wang, J. Eckert
    J. Mater. Eng. Perform., 29, 399-409 (2020)
  • Tailoring ultra-strong nanocrystalline tungsten nanofoams by reverse phase dissolution
    Zhao M., I. Issa, M. Pfeifenberger, M. Wurmshuber, D. Kiener
    Acta MaterialiaElsevier, 182, 215-225 (2020)
  • Inconel-steel multilayers by liquid dispersed metal powder bed fusion: Microstructure, Residual stress and Property Gradients
    Bodner S.C., L. van der Vorst, J. Zalesak, J. Todt, J.F. Keckes, V. Maier-Kiener, B. Sartory, N. Schell, J. Hooijmans, J. Saurwalt, J. Keckes
    Additive Manufacturing, 32, ARTN 101027 (2019)
  • Novel a + b Type Ti-Fe-Cu Alloys Containing Sn with Pertinent Mechanical Properties
    Zadorozhnyy V., S. Ketov, T. Wada, S. Wurster, V. Nayak, D. Louzguine-Luzgin, J. Eckert, H. Kato
    metals, 10, 1-12 (2019)
  • Electrocatalytic Behavior of Hydrogenated Pd-Metallic Glass Nanofilms: Butler-Volmer, Tafel, and Impedance Analyses
    Sarac B., T. Karazehir, M. Mühlbacher, A. Darac, J. Eckert
    Electrocatalysis, 11, 94-109 (2019)
  • Reversing and non-reversing effects of PEEK-HA composites on tuning cooling rate during crystallization
    Dey S., S. Chatterjee, F. Spieckermann, P. Ghosh, S. Samanta
    J. Polym. Res., 26, ARTN 279 (2019)
  • Fatique crack growth in railway axle specimens - Transferability and model validation
    Simunek D., M. Leitner, M. Rieger, R. Pippan, H.P. Gänser, F.J. Weber
    International Journal of Fatigue, 133, ARTN 105421 (2019)
  • Combined Fe and O effects on microstructural evolution and strengthening in Cu-Fe nanocrystalline alloys
    Guo J., Q. Shao, O. Renk, L. Li, Y. He, Z. Zhang, R. Pippan
    Materials Science & Engineering, 772, ARTN 138800 (2019)
  • In situ fabrication of TiC-NiCr cermets by selective laser melting
    Aramian A., Z. Sadeghian, K. Prashanth, F. Berto
    International Journal of Refractory Metals & Hard Materials, 87, ARTN 105171 (2019)
  • Understanding structural evolution of nanostructures during deformation form 2D (3D) Experiments
    Renk O., M. Kapp, R. Pippan
    IOP Conference SeriesMaterials Science and Engineering, 580, ARTN 012021 (2019)
  • Ultrafine-grained Tungsten by High-Pressure Torsion-Bulk precursor versus powder processing route
    Wurmshuber M., S. Doppermann, S. Wurster, D. Kiener
    IOP Conference Series: Materials Science and Engineering, 580, ARTN 012051 (2019)
  • Application of the material inhomogeneity effect for the improvement of fracture toughness of a brittle polymer
    Tiwari A., J. Wiener, F. Arbeiter, G. Pinter, Ol Kolednik
    Engineering Fracture Mechanics, 224, ARTN 106776 (2019)
  • Stress-controlled decomposition routes in cubic AlCrN films assessed by in-situ high-temperature high-energy grazing incidence transmission X-ray diffraction
    Meindlhumer M., S. Klima, N. Jäger, A. Stark, H. Hruby, C. Mitterer, J. Keckes, R. Daniel
    Scientific ReportsNature, 9, ARTN 18027 (2019)
  • Microstructure and stress gradients in TiW thin films characterized by 40 nm X-ray diffraction and transmission electron microscopy
    Saghaeian F., J. Keckes, S. Woehlert, M. Rosenthal, M. Reisinger, J. Todt
    Thin Solid Films, 691, ARTN 137576 (2019)
  • Novel welding of Al0.5CoCrFeNi high-entropy alloy: Corrosion behavior
    Sokkalingam R., K. Sivaprasad, M. Duraiselvam, V. Muthupandi, K. Prashanth
    Journal of Alloys and Compounds, 817, ARTN 153163 (2019)
  • Growth-twins in CrN/AlN multilayers induced by hetero-phase interfaces
    Chen Z., Q. Shao, M. Bartosik, P. Mayrhofer, H. Chen, Z. Zhang
    Acta Materialia, 185, 157-170 (2019)
  • The sputter performance of an industrial-scale planar Mo-target over its lifetime: Target erosion and film properties
    Rausch M., A. Sabag, K. Pichler, G. Gruber, J. Köstenbauer, H. Köstenbauer, P. Kreiml, M. Cordill, J. Winkler, C. Mitterer
    Surface & Coatings Technology, 381, ARTN 125174 (2019)
  • Biegsames Glas statt Scherben
    Cordill M.
    Kronen Zeitung, 19 (2019)
  • Investigation of high cyclic fatigue behaviour of thin copper films using MEMS structure
    Saghaeian F., M. Lederer, A. Hofer, J. Todt, J. Keckes, G. Khatibi
    Int. J. Fatigue, 128, ARTN 105179 (2019)
  • Effect of Re on microstructural evolution and densification kinetics during spark plasma sintering of nanocrystalline W
    Pramanik S., A. Srivastav, B. Jolly, N. Chawake, B.S. Murty
    Adv. Powder Technol., 30, 2779-2786 (2019)
  • Combined thermo-physical investigations of thin layers with Time Domain Thermoreflectance and Scanning Thermal Microscopy on the example of 500 nm thin, CVD grown tungsten
    Fladischer K., V. Leitgeb, L. Mitterhuber, G. Maier, J. Keckes, M. Sagmeister, S. Carniello, S. Defregger
    Thermochim. Acta, 681, ARTN 178373 (2019)
  • Highly ductile amorphous oxide at room temperature and high strain rate
    Frankberg E., J. Kalikka, F. Ferre, L. Joly-Pottuz, T. Salminen, J. Hintikka, M. Hokka, S. Koneti, T. Douillard, B. Le Saint, P. Kreiml, M. Cordill, T. Epicier, D. Stauffer, M. Vanazzi, L. Roiban, J. Akola, F. Di Fonzo, E. Levanen, K. Masenelli-Varlot
    Science, 366, 864-869 (2019)
  • Bioinspired toughness improvement through soft interlayers in mineral reinforced polypropylene
    Wiener J., F. Arbeiter, A. Tiwari, O. Kolednik, G. Pinter
    Mechanics of Materials, 1 40, ARTN 103243 (2019)
  • Tuneable Magneto-Resistance by Severe Plastic Deformation
    Wurster S., L. Weissitsch, M. Stückler, P. Knoll, H. Krenn, R. Pippan, A. Bachmaier
    metals, 2019, ARTN 1188 (2019)
  • Aluminum matrix composites reinforced with metallic glass particles with core-shell structure
    Guan H., C. Li, K. Prashanth, J. Tan, J. Eckert, J. Tao, J. Yi
    Materials Science & Engineering, A 771, ARTN 138630 (2019)
  • On the Room-Temperature Mechanical Properties of an Ion-Irradiated TiZrNbHfTa Refractory High Entropy Alloy
    Moschetti M., A. Xu, B. Schuh, A. Hohenwarter, J.P. Couzinie, J. Kruzic, D. Bhattacharyya, B. Gludovatz
    JOM, 2019, ARTN 3861-6 (2019)
  • Development of Damage - Tolerant and Fracture-Resistant Materials by Utilizing the Material Inhomogeneity Effect
    Kolednik O., R. Kasberger, M. Sistaninia, J. Predan, M. Kegl
    ASMEJournal of Applied Mechanics, 86, 111004-1-111004-12 (2019)
  • Evolution of Bimodal Microstructure and High-Temperature Wear Resistance of Al-Cu-Ni Alloys
    Maity S., D. Chanda, P. Ramasamy, B. Show, J. Eckert, S. Bera
    Communication, A, ARTN 5518 (2019)
  • Effect of Heterophase Interfaces on Microstructure and Crystallographic Texture Evolution During Rolling of Directionally Solidified Ag-Cu Eutectic Alloy
    Li J., J. Li, O. Renk, R. Pippan, P. Ghosh
    Metall. Mater. Trans. A-Phys. Metall. Mater. Sci., 51, 368-379 (2019)
  • Optimizing the magnetic properties of Fe-based amorphous powder by adjusting atomic structures from vitrification at different temperatures
    Kim S., H. Oh, H. Kim, A. Lee, H.-J. Kim, S. Yang, Y. Kim, H. Choi, I. Kim, H.-G. Kim, J. Eckert, J. Kim, M. Lee
    Journal of Applied Physics, 126, ARTN 165109 (2019)
  • Damage tolerance of lamellar bone
    Razi H., J. Predan, F. Fischer, O. Kolednik, P. Fratzl
    Bone, 130, ARTN 115102 (2019)
  • Point-defect engineering of MoN/TaN superlattice films: A first-principles and experimental study
    Koutna N., R. Hahn, J. Zalesak, M. Friak, M. Bartosik, J. Keckes, M. Sob, P. Mayrhofer, D. Holec
    Mater. Des., 186, ARTN 108211 (2019)
  • High density of genuine growth twins in electrodeposited aluminium
    Rafailovic L., C. Gammer, C. Ebner, C. Rentenberger, A. Jovanovic, I. Pasti, N. Skorodumova, H. Karnthaler
    Materials Science, 5, eaax3894 (2019)
  • Mechanical properties and epitaxial growth of TiN/AlN superlattices
    Fallman M., Z. Chen, Z.L. Zhang, P.H. Mayrhofer, M. Bartosik
    Surf. Coat. Technol., 375, 1-7 (2019)
  • New Developments in Nanomechanical Methods
    Wharry J., M. Cordill
    JOM, 71, 3340-3342 (2019)
  • CROSS-SECTIONAL GRADIENTS OF RESIDUAL STRESSES, MICROSTRUCTURE AND PHASES IN A NITRIDED STEEL REVEALED BY 20 mu m SYNCHROTRON X-RAY DIFFRACTION
    Bodner S.C., T. Ziegelwanger, M. Meindlhumer, J. Holcova, J. Todt, N. Schell, J. Keckes
    Metall. Ital., 6-10 (2019)
  • Hierarchically-structured large superelastic deformation in ferroelastic-ferroelectrics
    Deng Y., C. Gammer, J. Ciston, P. Ercius, C. Ophus, K. Bustillo, C. Song, R. Zhang, D. Wu, Y. Du, Z. Chen, H. Dong, A. Khachaturyan, A. Minor
    Acta Materialia, 181/2019, 501-509 (2019)
  • Au–Sn solders applied in transient liquid phase bonding: Microstructure and mechanical behavior
    Du C., R. Soler, B. Völker, K. Matoy, J. Zechner, G. Langer, M. Reisinger, J. Todt, C. Kirchlechner, G. Dehm
    Materialia, 8, ARTN 100503 (2019)
  • Coiled artificial muscles based on UHMWPE with large muscle stroke
    Maksimkin A., I. Larin, D. Chukov, M. Zadorozhnyy, T. Dayyoub, V. Zadorozhnyy, F. Spieckermann, V. Soprunyuk
    Materials Today Communications, 21 (2019), ARTN 100688 (2019)
  • Microstructural characterization of medium entropy alloy thin films
    Chawake N., J. Zalesak, C. Gammer, R. Franz, M. Cordill, J. Kim, J. Eckert
    Scripta Materialia, 177, 22-26 (2019)
  • Correlation of mechanical damage and electrical behavior of Al/Mo bilayers subjected to bending
    Kreiml P., M. Rausch, V. Terziyska, H. Koestenbauer, J. Winkler, C. Mitterer, M. Cordill
    Thin Solid Films, 687, UNSP 137480 (2019)
  • Water in Mesoporous Confinement: Glass-To-Liquid Transition or Freezing of Molecular Reorientation Dynamics?
    Schranz W., V. Soprunyuk
    Molecules, 24/2019, ARTN 3563 (2019)
  • The Influence of Partial Replacement of Cu with Ga on the Corrosion Behavior of Ti40Zr10Cu36Pd14 Metallic Glasses
    Wei Q., P. Gostin, O. Addison, D. Reed, M. Calin, S. Bera, P. Ramasamy, A. Davenport
    Journal of The Electrochemical Society, 166, 485-491 (2019)
  • Mechanochemical reaction of Al and melamine: a potential approach towards the in situ synthesis of aluminum nitride - carbon nanotube nanocomposites
    Rounaghi S., H. Eshghi, S. Scudino, E. Esmaeili, A. Kiani-Rashid, J. Eckert
    PCCP, 21, 22121-22131 (2019)
  • The creep behavior of a fully lamellar γ-TiAl based alloy
    Burtscher M., T. Klein, S. Mayer, H. Clemens, F. Fischer
    Intermetallics, 114, ARTN 106611 (2019)
  • Microstructure and mechanical property of bimodal-size metallic glass particle-reinforced Al alloy matrix composites
    Xie M., Z. Wang, G. Zhang, C. Yang, W. Zhang, K. Prashanth
    Journal of Alloys and Compounds, 814, ARTN 152317 (2019)
  • Correlating elemental distribution with mechanical properties of TiN/SiNx nanocomposite coatings
    Sperr M., Z.L. Zhang, Y.P. Ivanov, P.H. Mayrhofer, M. Bartosik
    Scr. Mater., 170, 20-23 (2019)
  • Elastic Properties and Stacking Fault Energies of Borides, Carbides and Nitrides from First-Principles Calculations
    Zhang Y., Z. Liu, D. Yuan, Q. Shao, J. Chen, C. Wu, Z. Zhang
    Acta Metall. Sin.-Engl. Lett., 32, 1099-1110 (2019)
  • Friction and Tribo-Chemical Behavior of SPD-Processed CNT-Reinforced Composites
    Aristizabal K., A. Tayrac, A. Katzensteiner, A. Bachmaier, S. Suarez
    LUBRICANTS, 7, ARTN 75 (2019)
  • Mechanical Behavior of Ti6Al4V Scaffolds Filled with CaSiO3 for Implant Applications
    Rahmani R., M. Antonov, L. Kollo, Y. Holovenko, Prashanth K.
    applied sciences, 2019, ARTN 3844 (2019)
  • Investigation of Compatibility Between M-Cr-Al-X Thermal Spray Coatings and Third Generation y-TiAl Alloys
    Mazilin I., N. Zaitsev, A. Artamonov, L. Baldaev, V. Zadorozhnyy, M. Gorshenkov, A. Stepashkin, V. Sudarchikov, S. Kaloshkin
    Journal of Materials Engineering and Performance, 8, 1059-9495 (2019)
  • Effect of lattice surface treatment on performance of hardmetal - titanium interpenetrating phase composites
    Holovenko Y., L. Kollo, M. Saarna, R. Rahmani, T. Soloviova, M. Antonov, K. Prashanth, S. Cygan, R. Veinthal
    International Journal of Refractory Metals & Hard Materials, 86, ARTN 105087 (2019)
  • Tungsten Matrix Composite Reinforced with CoCrFeMnNi High-Entropy Alloy: Impact of Processing Routes on Microstructure and Mechanical Properties
    Satyanarayana P., R. Sokkalingam, P. Jena, K. Sivaprasad, K. Prashanth
    metals, 9, 12 (2019)
  • Fracture behavior and deformation mechanisms in nanolaminated crystalline/amorphous micro-cantilevers
    Wang Y., R. Fritz, D. Kiener, J. Zhang, G. Liu, O. Kolednik, R. Pippan, J. Sun
    ElsevierActa Materialia, 180 (2019), 73-83 (2019)
  • Thermodynamic and mechanical stability of Ni3X-type intermetallic compounds
    Kulo N., S. He, W. Ecker, R. Pippan, T. Antretter, V. Razumovskiy
    ElsevierIntermetallics, 9 (2019)
  • Toughening in nanosilica-reinforced epoxy with tunable filler-matrix interface properties
    Picu C., K. Krawczyk, Z. Wang, H. Pishvazadeh-Moghaddam, M. Sieberer, A. Lassnig, W. Kern, A. Hadar, D. Constantinescu
    Compos. Sci. Technol., 183, ARTN 107799 (2019)
  • Atomic resolution analyses on defects in nanocrystalline Cu-based alloys generated by severe plastic deformation
    Zhang Y., Z. Xu, W. Ming, J. Guo, Z. Zhang, J. Chen
    Mater. Charact., 157, ARTN 109886 (2019)
  • Selective laser melting of 316L stainless steel: Influence of TIB2 addition on microstructure and mechanical properties
    Salman O., C. Gammer, J. Eckert, M. Salih, E. Abdulsalam, K. Prashanth, S. Scudino
    Materials Today CommunicationsElsevier, 21, 100615 (2019)
  • Quasicrystalline Composites by Additive Manufacturing
    Prashanth K., S. Scudino
    Key Engineering Materials, 818, 72-76 (2019)
  • Modulating heterogeneity and plasticity in bulk metallic glasses: Role of interfaces on shear banding
    Kosiba K., D. Sopu, S. Scudino, L. Zhang, J. Bednarcik, S. Pauly
    Int. J. Plast., 119, 156-170 (2019)
  • Investigation of structure and mechanical properties of TiZrHfNiCuCo high entropy alloy thin films synthesized by magnetron sputtering
    Kim Y., H. Park, S. Mun, E. Jumaev, S. Hong, G. Song, J. Kim, Y. Park, K. Kim, S. Jeong, Y. Kwon, K. Kim
    J. Alloy. Compd., 797, 834-841 (2019)
  • 20 Hz synchrotron X-ray diffraction analysis in laser-pulsed WC-Co hard metal reveals oscillatory stresses and reversible composite plastification
    Gruber D., D. Kiefer, R. Roessler, F. Beckmann, M. Tkadletz, T. Kluensner, C. Czettl, J. Keckes, J. Gibmeier
    Int. J. Refract. Met. Hard Mat., 82, 121-128 (2019)
  • Evolution of the lattice defects and crystalline domain size in carbon nanotube metal matrix composites processed by severe plastic deformation
    Aristizabal K., A. Katzensteiner, M.: Leoni, F. Muecklich, S. Suarez
    Mater. Charact., 154, 344-352 (2019)
  • Microstructure and mechanical properties of Al-12Si and Al-3.5 Cu-1.5Mg-1Si bimetal fabricated by selective laser melting
    Wang P., C. Lao, Z. Chen, Y. Liu, H. Wang, H. Wendrock, J. Eckert, S. Scudino
    Journal of Materials Science & Technology, 36, 18-26 (2019)
  • Facile preparation of superhydrophobic wood surfaces via spraying of aqueous alkyl ketene dimer dispersions
    Arminger B., W. Gindl-Altmutter, J. Keckes, C. Hansmann
    RSC ADVANCES, 9, 24357-24367 (2019)
  • Compositional tuning-induced permanent color adjustment and mechanical properties: Binary Cu-Mg colored metallic system
    Jeong Y., J. Kim, S. Hong, H. Lee, S. Choi, K. Kim
    Mater. Des., 175, ARTN 107814 (2019)
  • Synthesis of new glassy Mg-Ca-Zn alloys with exeptionally low Young´s Modulus: Exploring near eutectic compositions
    Bera S., S. Paul, P. Ramasamy, D. Mandal, M. Das, A. Lassnig, O. Renk, M. Calin, J. Eckert
    Scripta MaterialiaScience Direct, 173, 137-143 (2019)
  • Resolving the FCC/HCP interfaces of the gamma '(Ag2Al) precipitate phase in aluminium
    Zhang Z., J. Rosalie, N. Medhekar, L. Bourgeois
    Acta Mater., 174, 116-130 (2019)
  • A Novel Setup for In Situ Monitoring of Thermomechanically Cycled Thin Film Metallizations
    Moser S., G. Zernatto, M. Kleinbichler, M. Nelhiebel, J. Zechner, M. Cordill, R. Pippan
    The Minerals, Metals & Materials SocietyJOM, ARTN: 1543-1851 (2019)
  • Face centered cubic titanium in high pressure torsion processed carbon nanotubes reinforced titanium composites
    Li F., P. Chen, Z. Chen, P. Hao, J. Yi, K. Prashanth, J. Eckert
    ElsevierJournal of Alloys and Compounds, 939-945 (2019)
  • Face centered cubic titanium in high pressure torsion processed carbon nanotubes reinforced titanium composites
    Li F., P. Chen, Z. Chen, P. Hao, J. Yi, K. Prashanth, J. Eckert
    Journal of Alloys and Compounds, 939-945 (2019)
  • Evaluation of hydrogen storage perfomance of ZrTiVNiCrFe in electrochemical and gas-solid reactions
    Zadorozhnyy V., B. Sarac, E. Berdonosova, T. Karazehir, A. Lassnig, C. Gammer, M. Zadorozhnyy, S. Ketov, S. Klyamkin, J. Eckert
    International Journal of Hydrogen Energy, 2019, ARTN 0360-3199 (2019)
  • Anisotropy in fracture and fatigue resistance of pearlitic steels and its effect on the crack path
    Leitner T., A. Hohenwarter, R. Pippan
    Int. J. Fatigue, 124, 528-536 (2019)
  • On the onset of deformation twinning in the CrFeMnCoNi high-entropy alloy using a novel tensile specimen geometry
    Thurston K., A. Hohenwarter, G. Laplanche, E.P. George, B. Gludovatz, R.O. Ritchie
    Intermetallics, 110, UNSP 106469 (2019)
  • Comparison of the Dislocation Structure of a CrMnN and a CrNi Austenite after Cyclic Deformation
    Fluch R., M. Kapp, K. Spiradek-Hahn, M. Brabetz, H. Holzer, R. Pippan
    metals 2019, 9, ARTN 784 (2019)
  • Evaluation of the intergranular crack growth resistance of ultrafine grained tungsten materials
    Pfeifenberger M., V. Nikolic, S. Zak, A. Hohenwarter, R. Pippan
    Actra Materialia, 176, 330-340 (2019)
  • Impact of the scanning strategy on the mechanical behavior of 316L steel synthesized by selective laser melting
    Salman O., F. Brenne, T. Niendorf, J. Eckert, K. Prashanth, T. He, S. Scudino
    Journal of Manufacturing Processes, 255-261 (2019)
  • Microstructure and Mechanical Properties of Al-(12-20) Si Bi-Material Fabricated by Selective Laser Melting
    Zhang S., P. Ma, Y. Jia, Z. Yu, R. Sokkalingam, X. Shi, P. Ji, J. Eckert, K.G. Prashanth
    materials, 12, ARTN 2126 (2019)
  • Influence of crystal orientation and Berkovich trip rotation on the mechanical characterization of grain boundaries in molybdenum
    Jakob S., A. Leitner, A. Lorich, M. Eidenberger-Schober, W. Knabl, R. Pippan, H. Clemens, V. Maier-Kiener
    Materials and Design, 182 (2019), ARTN 107998 (2019)
  • Microstructure and Mechanical Properties of Al-(12-20)Si Bi-Material Fabricated by Selective Laser Melting
    Zhang S., P. Ma, Y. Jia, Z. Yu, R. Sokkalingam, X. Shi, P. Ji, J. Eckert, K. Prashanth
    Materials, 12, ARTN 2126 (2019)
  • Microstructure and Failure Characteristics of Nanostructured Molybdenum-Cooper Composites
    Schwarz K., J. Rosalie, S. Wurster, R. Pippan, A. Hohenwarter
    Advanced Engineering Materials, 2019, ARTN 1900474 (2019)
  • Investigation of high cyclic fatigue behaviour of thin copper films using MEMS structure
    Saghaeian F., M. Lederer, A. Hofer, J. Todt, J. Keckes, G. Khatibi
    Int. Journal of Fatique, 128, ARTN 105179 (2019)
  • Stability of the B2 CuZr phase in Cu-Zr-Al-Sc bulk metallic glass matrix composites
    Escher B., I. Kaban, U. Kuehn, J. Eckert, S. Pauly
    J. Alloy. Compd., 790, 657-665 (2019)
  • High-Pressure Torsion Deformation Induced Phase Transformations and Formations: New Material Combinations and Advanced Properties
    Bachmaier A., R. Pippan
    Materials Transactions, No.7, 1256-1269 (2019)
  • The preparation of surfactant-free highly dispersed ethylene glycol-based aluminum nitride-carbon nanofluids for heat transfer application
    Esmaeili E., S. Rounaghi, W. Gruner, J. Eckert
    Advanced Powder Technology, 30/2019, 2032-2041 (2019)
  • Friction welding of electron beam melted Ti-6Al-4V
    Qin P.T., R. Damodaram, T. Maity, W.W. Zhang, C. Yang, Z. Wang, K.G. Prashanth
    Materials Science & Engineering A, 761, ARTN 138045 (2019)
  • In situ analysis of the effect of high heating rates and initial microstructure on the formation and homogeneity of austenite
    Eggbauer A., M. Lukas, G. Ressel, P. Prevedel, F. Mendez-Martin, J. Keckes, A. Stark, R. Ebner
    J. Mater. Sci., 54, 9197-9212 (2019)
  • Investigation of Zr55Cu30Al10Ni5 bulk amorphous alloy crystallization
    Sergiienko R., O. Shcheretskyi, V. Zadorozhnyy, A. Verkhovliuk, D. Louzguine-Luzgin
    J. Alloy. Compd., 791, 477-482 (2019)
  • Micromechanical and microstructural properties of tungsten fibers in the as-produced and annealed state: Assessment of the potassium doping effect
    Terentyev D., L. Tanure, A. Bakaeva, A. Dubinko, V. Nikolic, J. Riesch, K. Verbeken, S. Lebediev, E.E. Zhurkin
    Int. J. Refract. Met. Hard Mat., 81, 253-271 (2019)
  • Characterization of the chips generated by the nanomachining of germanium for X-ray crystal optics
    Zaprazny Z., D. Korytar, M. Jergel, Y. Halahovets, M. Kotlar, I. Matko, J. Hagara, P. Siffalovic, J. Keckes, E. Majkova
    Int. J. Adv. Manuf. Technol., 102, 2757-2767 (2019)
  • Measurement of local strain
    Gammer C., M.I. Richard, C. Eberl
    MRS Bulletin, Vol. 44/ Issue 6, 459-464 (2019)
  • Saturation of Grain Refinement during Severe Plastic Deformation of Single Phase Materials: Reconsiderations, Current Status and Open Questions
    Renk O., R. Pippan
    Mater. Trans., 60, 1270-1282 (2019)
  • The preparation of surfactant-free highly dispersed ethylene glycol-based aluminum nitride-carbon nanofluids for heat transfer application
    Esmaeili E., S. Rounaghi, W. Gruner, J. Eckert
    Adv. Powder Technol., 30, 2032-2041 (2019)
  • Direct measurement of nanostructural change during in situ deformation of a bulk metallic glass
    Pekin T., J. Ding, C. Gammer, B. Ozdol, C. Ophus, M. Asta, R.O. Ritchie, A. Minor
    Naturenature communications, 2019 (10), 2445 (2019)
  • Exceptional fracture resistance of ultrathin metallic glass films due to an intrinsic size effect
    Glushko O., M. Muehlbacher, C. Gammer, M.J. Cordill, C. Mitterer, J. Eckert
    Scientic Reports, 9, ARTN 8281 (2019)
  • An investigation on diffusivity while achieving a cylindrical aluminide coating on metals using simultaneous spark plasma sintering of powers
    Chawake N., P. Ghosh, J. Eckert, R.S. Kottada
    Scripta Materialia, 170(2019), 156-160 (2019)
  • Crack deflecting microstructure for improved electro-mechanical lifetimes of flexible systems
    Cordill M.J., T. Joerg, O. Glushko, R. Franz, C. Mitterer
    Mater. Lett., 244, 47-49 (2019)
  • Effect of TiB2 particles on microstructure and crystallographic texture of Al-12Si fabricated by selective laser melting
    Xi L., P. Wang, K.G. Prashanth, H. Li, Prykhodko H., S. Scudino, I. Kaban
    J. Alloy. Compd., 786, 551-556 (2019)
  • A study on the micro-evolution of mechanical property and microstructures in (Cu-30Fe)-2X alloys with the addition of minor alloying elements
    Jeong Y., H. Jo, J.T. Kim, S.H. Hong, K. Kim
    J. Alloy. Compd., 786, 341-345 (2019)
  • Fracture properties of ultrafine grain chromium correlated to single dislocation processes at room temperature
    Issa I., A. Hohenwarter, R. Fritz, D. Kiener
    Journal of Materials Research, 2019, 2370-2383 (2019)
  • A comparative study of glass-forming ability, crystallization kinetics and mechanical properties of Zr55Co25Al20 and Zr52Co25Al23 bulk metallic glasses
    Dong Q., Y.J. Pan, J. Tan, X.M. Qin, C.J. Li, P. Gao, Z.X. Feng, M. Calin, J. Eckert
    J. Alloy. Compd., 785, 422-428 (2019)
  • Correlating structural and mechanical properties of AlN/TiN superlattice films
    Koutna N., P. Kehak, Z. Chen, M. Bartosik, M. Fallmann, M. Cerny, Z. Zhang, M. Friak, M. Sob, P.H. Mayrhofer, D. Holec
    Scr. Mater., 165, 159-163 (2019)
  • Investigation on the Relationship Between Transition Energy and the Color Change of Cu-M Alloys
    Jeong Y., S. Hong, J.T. Kim, H. Park, Y.S. Kim, H.D. Lee, J.K. Lee, S. Mun, Y. Hwang, K. Heo, K. Kim
    Met. Mater.-Int., 25, 539-545 (2019)
  • Influence of annealing on microstructure and mechanical properties of ultrafine-grained Ti45Nb
    Völker B., V. Maier-Kiener, K. Werbach, T. Müller, S. Pilz, M. Calin, J. Eckert, A. Hohenwarter
    Materials and Design, 179 (2019), ARTN 107864 (2019)
  • New approaches in lowering the gas-phase synthesis temperature of TiO2 nanoparticles by H2O-assisted atmospheric pressure CVS process
    Rahiminezhad-Soltani M., K. Saberyan, A. Simchi, C. Gammer
    J. Mater. Res. Technol-JMRT, 8, 3024-3035 (2019)
  • Hydrogen-enhanced decohesion mechanism of the special E5(0 1 2) [1 0 0] grain boundary in Ni with Mo and C solutes
    He S., W. Ecker, R. Pippan, V.I. Razumovskiy
    Computational Materials ScienceScience Direct, 167, 100-110 (2019)
  • Electron Irradiation Effects on Strength and Ductility of Polymer Foils Studied by Femtosecond Laser-Processed Micro-Tensile Specimens
    Pfeifenberger M., G. Milassin, A. Hohenwarter, B. Putz, C.O.A. Semprimoschnig, R. Pippan
    Materials, 12, ARTN 1468 (2019)
  • Annealing-assisted high-pressure torsion in Zr(55)Cu(30)Al(10)Ni(5 )metallic glass
    Sarac B., F. Spieckermann, A. Rezvan, C. Gammer, L. Kraemer, J.T. Kim, J. Keckes, R. Pippan, J. Eckert
    J. Alloy. Compd., 784, 1323-1333 (2019)
  • Dissimilar welding of Al0.1CoCrFeNi high-entropy alloy and AISI304 stainless steel
    Sokkalingam R., V. Muthupandi, K. Sivaprasad, K. Prashanth
    Journal of Materials Research, 34, 2683-2694 (2019)
  • Initiation and stagnation of room temperature grain coarsening in cyclically strained gold films
    Glushko O., G. Dehm
    Acta Mater., 169, 99-108 (2019)
  • Structure-Property Relationships in Shape Memory Metallic Glass Composites
    Sopu D., X. Yuan, F. Moitzi, M. Stoica, J. Eckert
    Materials, 12, ARTN 1419 (2019)
  • Mechanochemical synthesis and hydrogenation behavior of (TiFe)100-xNix alloys
    Zadorozhnyy V., E. Berdonosova, C. Gammer, J. Eckert, M. Zadorozhnyy, A. Bazlov, M. Zheleznyi, S. Kaloshkin, S. Klyamkin
    Journal of Alloys and CompoundsElsevierScienceDirect, 796, 42-46 (2019)
  • Bioceramic scaffolds by additive manufacturing for controlled delivery of the antibiotic vancomycin
    Kamboj N., M. Rodríguez, R. Rahmani, K.G. Prashanth, I. Hassainova
    Proceedings of the Estonian Academy of Sciences, 68, 185-190 (2019)
  • In-Situ Synchotron Profile Analysis after High-Pressure Torsion Deformation
    Kerber M., F. Spieckermann, R. Schuster, B. Joni, N. Schell, E. Schafler
    crystalsMDPI, 9, 232 (2019)
  • Tuning the glass forming ability and mechanical properties of Ti-based bulk metallic glasses by Ga additions
    Bera S., P. Ramasamy, D. Sopu, B. Sarac, Zalesak J., C. Gammer, M. Stoica, M. Calin, J. Eckert
    Journal of Alloys and CompoundsElsevierScience Direct, 793, 552-563 (2019)
  • Surface structuring by Electron Beam for improved soft tissues adhesion and reduced bacterial contamination on Ti-grade 2
    Ferraris S., F. Warchomicka, C. Ramskogler, M. Tortello, A. Cochis, A. Scalia, G.G. di Confiengo, J. Keckes, L. Rimondini, S. Spriano
    J. Mater. Process. Technol., 266, 518-529 (2019)
  • Gradients of microstructure, stresses and mechanical properties in a multi-layered diamond thin film revealed by correlative cross-sectional nano-analytics
    Gruber D.P., J. Todt, N. Woehrl, J. Zalesak, M. Tkadletz, A. Kubec, S. Niese, M. Burghammer, M. Rosenthal, H. Sternschulte, M.J. Pfeifenberger, B. Sartory, J. Keckes
    Carbon, 144, 666-674 (2019)
  • Deformation behavior of designed dual-phase CuZr metallic glasses
    Peng C.X., D. Sopu, Y. Cheng, K.K. Song, S.H. Wang, J. Eckert, L. Wang
    Mater. Des., 168, ARTN 107662 (2019)
  • Crystallographic orientation dependent maximum layer thickness of cubic AlN in CrN/AlN multilayers
    Chen Z., D. Holec, M. Bartosik, P.H. Mayrhofer, Z. Zhang
    Acta Mater., 168, 190-202 (2019)
  • Toughness enhancement in TiN/WN superlattice thin films
    Buchinger J., N. Koutna, Z. Chen, Z. Zhang, P. Mayrhofer, D. Holec, M. Bartosik
    Acta Mater., 172, 18-29 (2019)
  • The Route to Supercurrent Transparent Ferromagnetic Barriers in Superconducting Matrix
    Ivanov Y., S. Soltan, J. Albrecht, E. Goering, G. Schuetz, Z. Zhang, A. Chuvilin
    ACS Nano 2019, 13, 5655-5661 (2019)
  • Ultrahigh hydrogen-sorbing palladium metallic-glass nanostructures
    Sarac B., Y. Ivanov, T. Karazehir, M. Mühlbacher, B. Kaynak, A. Greer, A. Sarac, J. Eckert
    Materials Horizons, Communication, 1481-1487 (2019)
  • Biomimetic hard and tough nanoceramic Ti-Al-N film with self-assembled six-level hierarchy
    Meindlhumer M., J. Zalesak, R. Pitonak, J. Todt, B. Sartory, M. Burghummer, A. Stark, N. Schell, D. Rostislav, J.F. Keckes, M. Lessiak, A. Köpf, R. Weißenbacher, J. Keckes
    Nanoscale, 2019,11, 7986-7995 (2019)
  • Mechanism of high-pressure torsion-induced shear banding and lamellar thickness saturation in Co-Cr-Fe-Ni-Nb high-entropy composites
    Maity T., K. Prashanth, A. Janda, J. Kim, F. Spieckermann, J. Eckert
    Journal of Materials Research, 34, 2672-2682 (2019)
  • Work hardening in selective laser melted Al-12Si alloy
    Gokuldoss P.
    Material Design Processing Comm, 1, 2019;e46 (2019)
  • Influence of directional microstructure on mechanical properties in Al-based ultrafine bimodal lamellar structured alloy
    Kim J.T., S.H. Hong, J. Eckert, K.B. Kim
    Mat Design Process Comm., 1, e52 (2019)
  • Encapsulation of a gradient Al2O3 layer on hierarchical structured substrate via two-step hybrid processes
    Park H., J. Lee, Y. Kim, S. Mun, T. Choi, E. Jumaev, S. Hong, J. Kim, J. Park, K. Kim
    Mater. Des., 167, ARTN 107616 (2019)
  • Controlling the distribution of structural heterogeneities in severely deformed metallic glass
    Bian X.L., D. Zhao, J.T. Kim, D. Sopu, G. Wang, R. Pippan, J. Eckert
    Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 752, 36-42 (2019)
  • Atomic structure evolution of high entropy metallic glass microwires at cryogenic temperature
    Yin H., Y. Huang, D. Daisenberg, P. Xue, S. Jiang, W. Ru, S. Jiang, Y. Bao, X. Bian, X. Tong, H. Shen, J. Sun
    Scr. Mater., 163, 29-33 (2019)
  • Lignin-based multiwall carbon nanotubes
    Gindl-Altmutter W., J. Köhnke, C. Unterweger, N. Gierlinger, J. Keckes, J. Zalesak, O. Rojas
    Composites Part A, 121, 175-179 (2019)
  • Chemical evolution-induced strengthening on AlCoCrNi dual-phase high-entropy alloy with high specific strength
    Jumaev E., S.H. Hong, J.T. Kim, H.J. Park, Y.S. Kim, S.Cl Mun, J.Y. Park, G. Song, J.K. Lee, B.H. Min, T. Lee, K.B. Kim
    J. Alloy. Compd., 777, 828-834 (2019)
  • Rate limiting deformation mechanisms of bcc metals in confined volumes
    Kiener D., R. Fritz, M. Alfreider, A. Leitner, R. Pippan, V. Maier-Kiener
    Acta Mater., 166, 687-701 (2019)
  • Garnet-Polymer Composite Electrolytes: New Insights on Local Li-Ion Dynamics and Electrodeposition Stability with Li Metal Anodes
    Zagorski J., J. Miguel Lopez del Amo, M.J. Cordill, F. Aguesse, L. Buannic, A. Llordes
    ACS APPLIED ENERGY MATERIALS, 2, 1734-1746 (2019)
  • Fast and direct determination of fragility in metallic glasses using chip calorimetry
    Spieckermann F., I. Steffny, X. Bian, S. Ketov, M. Stoica, J. Eckert
    HELIYON, 5, ARTN e01334 (2019)
  • Novel electrical transport properties of native Fe-Nb oxide layers leading to unilateral conductivity of a refractory metallic glass
    Trifonov A.S., A. Lubenchenko V, S. Ketov V, S. Taskaev V, D. Louzguine-Luzgin V
    HELIYON, 5, ARTN e01424 (2019)
  • Compressive and tensile bending of sputter deposited Al/Mo bilayers
    Kreiml P., M. Rausch, V. Terziyska, J. Winkler, C. Mitterer, M. Cordill
    Scripta Materialia, 162, 367-371 (2019)
  • A comparative study on the evolution of microstructure and hardness during monotonic and cyclic high pressure torsion of CoCuFeMnNi high entropy alloy
    Sonkusare R., N. Khandelwal, P. Ghosh, K. Biswas, N.P. Gurao
    J. Mater. Res., 34, 732-743 (2019)
  • Structure-stress relationships in nanocrystalline multilayered Al0.7Cr0.3N/Al0.9Cr0.1N coatings studied by cross-sectional X-ray nanodiffraction
    Klima S., N. Jäger, H. Hruby, C. Mitterer, J.F. Keckes, M. Burghammer, R. Daniel
    Materials and Design, 170 (2019), 107702 (2019)
  • Superior Wear Resitance in EBM-Processed TC4 Alloy Compared with SLM and Forged Samples
    Zhang W., P. Qin, Z. Wang, C. Yang, L. Kollo, D. Grzesiak, K.G. Prashanth
    materials, 12/5, 782 (2019)
  • Hydrogen storage properties of TiFe-based ternary mechanical alloys with cobalt and niobium. A thermochemical approach
    Berdonosova E.A., V.Y. Zadorozhnyy, M.Y. Zadorozhnyy, K.V. Geodakian, M.V. Zheleznyi, A.A. Tsarkov, S.D. Kaloshkin, S.N. Klyamkin
    International Journal of Hydrogen EnergyElsevierScience Direct, 44, 11233-11240 (2019)
  • The influence of crystallization conditions on the macromolecular structure and strength of y-polypropylene
    von Baeckmann C., H. Wilhelm, F. Spieckermann, S. Strobel, G. Polt, P. Sowinski, E. Piorkowska, A. Bismarck, M. Zehetbauer
    Thermochimica ActaElsevier, 677 (2019), 131-138 (2019)
  • Effect of heat treatment on microstructure and mechanical properties of 316L steel synthesized by selective laser melting
    Salman O.O., C. Gammer, A.K. Chaubey, J. Eckert, S. Scudino
    Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 748, 205-212 (2019)
  • Tailoring bimodal grain size structures in nanocrystalline compositionally complex alloys to improve ductility
    Schuh B., R. Pippan, A. Hohenwarter
    Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 748, 379-385 (2019)
  • Oxygen-mediated deformation and grain refinement in Cu-Fe nanocrystalline alloys
    Guo J., M.J. Duarte, Y. Zhang, A. Bachmaier, C. Gammer, G. Dehm, R. Pippan, Z. Zhang
    Acta Materialia, 281-293 (2019)
  • Estimation of diffusivity from densification data obtained during spark plasma sintering
    Chawake N., P. Ghosh, L. Raman, A.K. Srivastav, T. Paul, S.P. Harimkar, J. Eckert, R.S. Kottada
    Scr. Mater., 161, 36-39 (2019)
  • Design of next-generation alloys for additive manufacturing
    Gokuldoss P.
    Mat. Design Process Comm., 2019;e50, 1-4 (2019)
  • Retardation of Fatigue Crack Growth in Rotating Bending Specimens with Semi-Elliptical Cracks
    Leitner M., D. Simunek, J. Maierhofer, H. Gaenser, R. Pippan
    Metals, 9, ARTN 156 (2019)
  • Analytical and Numerical Crack Growth Analysis of 1:3 Scaled Railway Axle Specimens
    Simunek D., M. Leitner, J. Maierhofer, H.P. Gaenser, R. Pippan
    Metals, 9, ARTN 184 (2019)
  • Benefits of pattern formation by severe plastic deformation
    Kulagin R., Y. Beygelzimer, A. Bachmaier, R. Pippan, Y. Estrin
    Applied Materials TodayElsevierScience Direct, 236-241 (2019)
  • Coexistence of adjacent vacancy-ordered and eutectic phases in Al-Cu-Ni alloys
    Maity S., D.K. Chanda, P. Ramasamy, B.K. Show, J. Eckert, S. Bera
    Taylor & Francis, 98/2018, 486-493 (2019)
  • Polymorphic Transformation and Magnetic Properties of Rapidly Solidified Fe26.7Co26.7Ni26.7Si8.9B11.0 High-Entropy Alloys
    Zhang Z., K. Song, R. Li, Q. Xue, S. Wu, D. Yan, X. Li, B. Song, B. Sarac, J.T. Kim, P. Ramasamy, L. Wang, J. Eckert
    Materials, 12, ARTN 590 (2019)
  • Co-Cr-Mo-C-B metallic glasses with wide supercooled liquid region obtained by systematic adjustment of the metalloid ratio
    Kim J.T., S.H. Hong, Y.S. Kim, H.J. Park, T. Maity, N. Chawake, K.G. Prashanth, K.K. Song, W.M. Wang, J. Eckert, K.B. Kim, J.M. Park
    Journal of Non-Crystalline Solids, 310-319 (2019)
  • Graphene-templated synthesis of palladium nanoplates as novel electrocatalyst for direct methanol fuel cell
    Hujiang Y., L. Geng, Y. Zhang, G. Chang, Z. Zhang, X. Liu, M. Lei, Y. He
    Applied Surface Science, 385-392 (2019)
  • Direct atomic identification of cation migration induced gradual cubic-to-hexagonal phase transition in Ge2Sb2Te5
    Zheng Y., Y. Wang, T. Xin, Y. Cheng, R. Huang, P. Liu, M. Luo, Z. Zhang, S. Lv, Z. Song, S. Feng
    COMMUNICATIONS CHEMISTRY, 2, ARTN 13 (2019)
  • Influence of Processing Parameters on the Mechanical Properties of HPT-deformed Nickel/ Carbon Nanotube composites
    Katzensteiner A., T. Müller, K. Kormout, K. Aristizabel, S. Suarez, R. Pippan, A. Bachmaier
    Advanced Engineering Materials, 21(1), ARTN 1800422 (2019)
  • Study of Cu0 Nanowire Growth on Different Copper Surfaces
    Popovski F., S. Ludwikowska, F. Köck, J. Keckes, G. Maier
    Scientific Reports, 9, ARTN 37172-8 (2019)
  • Characterization of strain bursts in high density polyethylene by means of a novel nano creep test
    Wilhelm H., F. Spieckermann, C. Fischer, G. Polt, M. Zehetbauer
    International Journal of Plasticity, 116, 297-313 (2019)
  • Optimizing mechanical properties of Fe26.7Co26.7Ni26.7Si8.9B11 high entropy alloy by inducing hypoeutectic to quasi-duplex microstructural transition
    Zhang Z.Q., K.K. Song, S. Guo, Q.S. Xue, H. Xing, C.D. Cao, F.P. Dai, B. Voelker, A. Hohenwarter, T. Maity, N. Chawake, J.T. Kim, L. Wang, I. Kaban, J. Eckert
    Sci Rep, 9, ARTN 360 (2019)
  • Bioinspired nacre-like alumina with a bulk-metallic glass-forming alloy as a compliant phase
    Wat A., J. In Lee, C.W. Ryu, B. Gludovatz, J. Kim, A.P. Tomsia, T. Ishikawa, J. Schmitz, A. Meyer, M. Alfreider, D. Kiener, E.S. Park, R.O. Ritchie
    nature communications, 10, 961 (2019)
  • Electromechanical properties of cathodic arc deposited high entropy alloy thin films on polymer substrates
    Xia A., O. Glushko, M.J. Cordill, R. Franz
    J. Vac. Sci. Technol. A, 37, ARTN 010601 (2019)
  • Localized pore evolution assisted densification during spark plasma sintering of nanocrystalline W-5wt.%Mo alloy
    Srivastav A.K., N. Chawake, D. Yadav, N.S. Karthiselva, B.S. Murty
    Scr. Mater., 159, 41-45 (2019)
  • Influence of cyclic loading on the structure and double-stage structure relaxation behavior of a Zr-Cu-Fe-Al metallic glass
    Louzguine-Luzgin D.V., M.Y. Zadorozhnyy, S.V. Ketov, J. Jiang, I.S. Golovin, A.S. Aronin
    Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 742, 526-531 (2019)
  • Nanostructured Metallic Materials and Composites: Processes, Properties and Microstructures
    Bachmaier A., A. Hohenwarter, H.W. Hoeppel, J. Ivanisenko
    Adv. Eng. Mater., 21, ARTN 1801073 (2019)
  • Magnetic Binary Supersaturated Solid Solutions Processed by Severe Plastic Deformation
    Stueckler M., H. Krenn, R. Pippan, L. Weissitsch, S. Wurster, A. Bachmaier
    Nanomaterials, 9, ARTN 6 (2019)
  • High strength nanocrystalline Cu-Co alloys with high tensile ductility
    Bachmaier A., G.B. Rathmayr, J. Schmauch, N. Schell, A. Stark, N. De Jonge, R. Pippan
    Materials Research, 34 (1), 58-68 (2019)
  • Anisotropy of fracture toughness in nanostructured ceramics controlled by grain boundary design
    Rostislav D., M. Meindlhumer, W. Baumegger, J. Todt, J. Zalesak, T. Ziegelwanger, C. Mitterer, J. Keckes
    Materials and Design, 80-85 (2019)
  • Evolution of structure and residual stress of a fcc/hex-A1CrN multi-layered system upon thermal loading revealed by cross-sectional Xray nano-diffraction
    Jaeger N., S. Klima, H. Hruby, J. Julin, M. Burghammer, J.F. Keckes, C. Mitterer, R. Daniel
    Acta Mater., 162, 55-66 (2019)
  • Crack arrest in thin metallic film stacks due to material- and residual stress inhomogeneities
    Kozic D., H.-P. Gaenser, R. Brunner, D. Kiener, T. Antretter, O. Kolednik
    Thin Solid Films, 668, 14-22 (2018)
  • Ultrahigh-strength low carbon steel obtained from the martensitic state via high pressure torsion
    Müller T., M.W. Kapp, A. Bachmaier, P. Felfer, R. Pippan
    Acta Materialia, 168-177 (2018)
  • Oxide induced crack closure in the near threshold regime: The effect of oxide debris release
    Maierhofer J., D. Simunek, H.-P. Gaenser, R. Pippan
    Int. J. Fatigue, 117, 21-26 (2018)
  • Strengthening Effects in Nano-/Ultrafine-Grained Carbon Nanotube Reinforced-Titanium Composites Investigated by Finite Element Modeling
    Li F., P. Hao, J. Yi, K.G. Prashanth, T. Maity, J. Eckert
    Metall. Mater. Trans. A-Phys. Metall. Mater. Sci., 49A, 6469-6478 (2018)
  • Nested sampling, statistical physics and the Potts model
    Pfeifenberger M.J., M. Rumetshofer, W. von der Linden
    J. Comput. Phys., 375, 368-392 (2018)
  • Impact of interfaces on the radiation response and underlying defect recovery mechanisms in nanostructured Cu-Fe-Ag
    Wurmshuber M., D. Frazer, A. Bachmaier, Y. Wang, P. Hosemann, D. Kiener
    Mater. Des., 160, 1148-1157 (2018)
  • Ultrafast Giant Photostriction of Epitaxial Strontium Iridate Film with Superior Endurance
    Yang J., Y. Liou, W. Tzeng, H. Liu, Y. Chang, P. Xiang, Z. Zhang, C. Duan, C. Luo, Y. Chen, Y. Chu
    Nano Lett., 18, 7742-7748 (2018)
  • Mechanical, deformation and fracture behaviors of bulk metallic glass composites reinforced by spherical B2 particles
    Hong S.H., J.T. Kim, J.M. Park, G. Song, W.M. Wang, K.B. Kim
    Prog. Nat. Sci., 28, 704-710 (2018)
  • Structure and mechanical properties of Ti-Based alloys containing Ag subjected to a thermomechanical treatment
    Zadorozhnyy V., A. Kopylov, M. Gorshenkov, E. Shabanova, M. Zadorozhnyy, A. Novikov, A. Maksimkin, T. Wada, D.V. Louzguine-Luzgin, H. Kato
    Journal of Alloys and Compounds, 1182-1188 (2018)
  • Strain-rate dependent occurrence of cleavage fracture in Fe−Si−Al alloys
    Kolednik O., A. Umgeher, H. Kreuzer, T. Hebesberger, A. Pichler
    Materials Science and Engineering: A, 267-276 (2018)
  • Structure and Thermal Properties of an Al-Based Metallic Glass-Polymer Composite
    Zadorozhnyy V., M. Churyukanova, A. Stepashkin, M. Zadorozhnyy, A. Sharma, D. Moskovskikh, J. Wang, E. Shabanova, S. Ketov, D. Louzguine-Luzgin, S. Kaloshkin
    Metals, 8, met8121037 (2018)
  • Fracture mechanics of micro samples: Fundamental considerations
    Pippan R., S. Wurster, D. Kiener
    Mater. Des., 159, 252-267 (2018)
  • Anneal hardening and elevated temperature strain rate sensitivity of nanostructured metals: Their relation to intergranular dislocation accommodation
    Renk O., V. Maier-Kiener, I. Issa, J.H. Li, D. Kiener, R. Pippan
    Acta Materialia, 409-419 (2018)
  • Compressive and tensile bending of sputter deposited Al/Mo bilayers
    Kreiml P., M. Rausch, V. Terziyska, J. Winkler, C. Mitterer, M.J. Cordill
    Scripta Materialia, 367-271 (2018)
  • Removing the oxide layer in a nanostructured aluminum alloy by local shear deformation between nanoscale phases
    Wang Z., K.G. Prashanth, W.W. Zhang, S. Scudino, J. Eckert
    Powder Technology, 733-737 (2018)
  • Sample Size and Strain-Rate-Sensitivity Effects on the Homogeneity of High-Pressure Torsion Deformed Disks
    Hohenwarter A., R. Pippan
    Metallurgical and Materials Transactions A, 601-608 (2018)
  • Mechanical properties of the magnetocaloric intermetallic LaFe11.2Si1.8 alloy at different length scales
    Glushko O., A. Funk, V. Maier-Kiener, P. Kraker, M. Krautz, J. Eckert, A. Waske
    Acta Materialia, 40-50 (2018)
  • Anomalous re-ordering of Fe3Al disordered by high pressure torsion deformation
    Gammer C., C. Mangler, H.P. Karnthaler, C. Rentenberger
    Scr. Mater., 156, 90-94 (2018)
  • Fracture toughness evaluation of UFG tungsten foil
    Nikolic V., S. Wurster, D. Firneis, R. Pippan
    Int. J. Refract. Met. Hard Mat., 76, 214-225 (2018)
  • Deformation characteristics of ultrafine grained and nanocrystalline iron and pearlitic steel - An in situ synchrotron investigation
    Ghosh P., K.S. Kormout, U. Lienert, J. Keckes, R. Pippan
    Acta Mater., 160, 22-33 (2018)
  • Structural and mechanical characterization of heterogeneities in a CuZr-based bulk metallic glass processed by high pressure torsion
    Ebner C., B. Escher, C. Gammer, J. Eckert, S. Pauly, C. Rentenberger
    Acta Mater., 160, 147-157 (2018)
  • Der Werkstoff des "Ötzibeiles" - Die kupferzeitliche Beilklinge der Gletschermumie aus den ÖtztalerAlpen
    Sperl G.
    BHM - Berg- und Hüttenmännische Monatshefte, 1-1 (2018)
  • The effect of heat treatments on pure and potassium doped drawn tungsten wires: Part II - Fracture properties
    Nikolic V., J. Riesch, M. Pfeifenberger, R. Pippan
    Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 737, 434-447 (2018)
  • Constituent constraining effects on the microstructural evolution, ductility, and fracture mode of crystalline/amorphous nanolaminates
    Wang Y., D. Kiener, X. Liang, J. Bian, K. Wu, J. Zhang, G. Liu, J. Sun
    J. Alloy. Compd., 768, 88-96 (2018)
  • Synthesis, characterization and thermodynamic stability of nanostructured ε-iron carbonitride powder prepared by a solid-state mechanochemical route
    Rounaghi S.A., D. Vanpoucke, E. Esmaeili, S. Scudino, J. Eckert
    Journal of Alloys and Compounds, 327-336 (2018)
  • Electro-mechanical behavior of Al/Mo bilayers studied with in situ straining methods
    Kreiml P., M. Rausch, V.L. Terziyska, H. Koestenbauer, J. Winkler, C. Mitterer, M.J. Cordill
    Thin Solid Films, 665, 131-136 (2018)
  • On the stacking fault energy related deformation mechanism of nanocrystalline Cu and Cu alloys: A first-principles and TEM study
    Zhang Y., J. Guo, J. Chen, C. Wu, K. Kormout, P. Ghosh, Z. Zhang
    Journal of Alloys and Compounds, 807-818 (2018)
  • Sputter deposition of Mo-based multicomponent thin films from rotatable targets: Experiment and simulation
    Rausch M., M. Pavlovic, P. Kreiml, M.J. Cordill, J. Winkler, C. Mitterer
    Appl. Surf. Sci., 455, 1029-1036 (2018)
  • Local chemical ordering within the incubation period as a trigger for nanocrystallization of a highly supercooled Ti-based liquid
    Wang Z., C. Chen, S. Ketov, K. Akagi, A. Tsarkov, Y. Ikuhara, D. Louzguine-Luzgin
    Mater. Des., 156, 504-513 (2018)
  • Metallic glass nanolaminates with shape memory alloys
    Sopu D., K. Albe, J. Eckert
    Acta Mater., 159, 344-351 (2018)
  • Comparative investigation of microstructure, mechanical properties and strengthening mechanisms of Al-12Si/TiB2 fabricated by selective laser melting and hot pressing
    Xi L.X., H. Zhang, P. Wang, H.C. Li, K.G. Prashanth, K.J. Lin, I. Kaban, D.D. Gu
    Ceram. Int., 44, 17635-17642 (2018)
  • Enhancing the interface bonding in carbon nanotubes reinforced Al matrix composites by the in situ formation of TiAl3 and TiC
    Liu X.Q., C.J. Li, J.H. Yi, K.G. Prashanth, N. Chawake, J.M. Tao, X. You, Y.C. Liu, J. Eckert
    J. Alloy. Compd., 765, 98-105 (2018)
  • Influence of severe straining and strain rate on the evolution of dislocation structures during micro-/nanoindentation in high entropy lamellar eutectics
    Maity T., K.G. Prashanth, O. Balci, J.T. Kim, T. Schoberl, Z. Wang, J. Eckert
    Int. J. Plast., 109, 121-136 (2018)
  • A simple and versatile machine for creep testing at low loads (6-300 N) and on miniaturized specimens: Application to a Mg-base alloy
    Koundinya N.T.B.N., N.E. Kumar, N. Chawake, R. Korla, R.S. Kottada
    Rev. Sci. Instrum., 89, ARTN 105102 (2018)
  • Activation volume and energy of bulk metallic glasses determined by nanoindentation
    Krämer L., V. Maier-Kiener, Y. Champion, B. Sarac, R. Pippan
    Mater. Des., 155, 116-124 (2018)
  • Strain energy contributions on the bainitic phase transformation in a CrMoV steel during continuous cooling
    Reisinger S., E. Kozeschnik, G. Ressel, J. Keckes, A. Stark, S. Marsoner, R. Ebner
    Mater. Des., 155, 475-484 (2018)
  • Scratch induced thin film buckling for quantitative adhesion measurements
    Kleinbichler A., M.J. Pfeifenberger, J. Zechner, S. Woehlert, M.J. Cordill
    Mater. Des., 155, 203-211 (2018)
  • Plastic deformation mechanisms in severely strained eutectic high entropy composites explained via strain rate sensitivity and activation volume
    Maity T., K.G. Prashanth, O. Balci, Z. Wang, Y.D. Jia, J. Eckert
    Compos. Pt. B-Eng., 150, 7-13 (2018)
  • Pressure-Assisted Sintering of Al-Gd-Ni-Co Amorphous Alloy Powders
    Wang Z., K.G. Prashanth, K.B. Surreddi, C. Suryanarayana, J. Eckert, S. Scudino
    Materialia, 157-166 (2018)
  • Correlation between the atomic configurations and the amorphous-to-icosahedral phase transition in metallic glasses
    Geng G., Z. Yan, Y. Hu, Z. Wang, S. Ketov, J. Eckert
    J. Mater. Res., 33, 2775-2783 (2018)
  • On the microstructure control of the bendability of advanced high strength steels
    Suppan C., T. Hebesberger, A. Pichler, J. Rehrl, O. Kolednik
    Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 735, 89-98 (2018)
  • In-situ observations of the fracture and adhesion of Cu/Nb multilayers on polyimide substrates
    Cordill M.J., A. Kleinbichler, B. Voelker, P. Kraker, D.R. Economy, D. Toebbens, C. Kirchlechner, M.S. Kennedy
    Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 735, 456-462 (2018)
  • Cooperative deformation behavior between the shear band and boundary sliding of an Al-based nanostructure-dendrite composite
    Kim J.T., S.H. Hong, Y.S. Kim, H.J. Park, T. Maity, N. Chawake, X.L. Bian, B. Sarac, J.M. Park, K.G. Prashanth, J.Y. Park, J. Eckert, K.B. Kim
    Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 735, 81-88 (2018)
  • Impact of solute-solute interactions on grain boundary segregation and cohesion in molybdenum
    Scheiber D., L. Romaner, R. Pippan, P. Puschnig
    PHYSICAL REVIEW MATERIALS, 2, ARTN 093609 (2018)
  • High strength nanocrystalline Cu–Co alloys with high tensile ductility
    Bachmaier A., G.B. Rathmayr, J. Schmauch, N. Schell, A. Stark, N. de Jonge, R. Pippan
    Journal of Materials Research (JMR), 1-11 (2018)
  • Microstructural and texture evolution of copper-(chromium, molybdenum, tungsten) composites deformed by high-pressure-torsion
    Rosalie J., P. Ghosh, J. Guo, O. Renk, Z. Zhang
    Int. J. Refract. Met. Hard Mat., 75, 137-146 (2018)
  • Transition from thermally assisted to mechanically driven boundary migration and related apparent activation energies
    Renk O., R. Pippan
    Scr. Mater., 212-215 (2018)
  • Crack Initiation of Printed Lines Predicted with Digital Image Correlation
    Katsarelis C., O. Glushko, C. Tonkin, M.S. Kennedy, M.J. Cordill
    JOM, 70, 1805-1810 (2018)
  • Molecularly grafted, structurally integrated multifunctional polymer thin films with improved adhesion
    Lassnig A., N. Nakamura, T. Joerg, B. Reeja-Jayan, M.J. Cordill
    Surf. Coat. Technol., 349, 963-968 (2018)
  • Influence of phase transformation on the damage tolerance of Ti-Al-N coatings
    Bartosik M., H.J. Boehm, C. Krywka, Z.L. Zhang, P.H. Mayrhofer
    Vacuum, 155, 153-157 (2018)
  • A novel high-strength Al-based nanocomposite reinforced with Ti-based metallic glass nanoparticles produced by powder metallurgye
    Zhang W.W., Y. Hu, Z. Wang, C. Yang, G.Q. Zhang, K.G. Prashanth, C. Suryanarayana
    Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 734, 34-41 (2018)
  • The effect of heat treatments on pure and potassium doped drawn tungsten wires: Part I - Microstructural characterization
    Nikolic V., J. Riesch, R. Pippan
    Materials Science & Engineering A, 422-433 (2018)
  • Phase formation, microstructure and deformation behavior of heavily alloyed TiNb- and TiV-based titanium alloys
    Okulov I., M. Boenisch, A. Okulov V, A.S. Volegov, H. Attar, S. Ehternam-Haghighi, M. Calin, Z. Wang, A. Hohenwarter, I. Kaban, K.G. Prashanth, J. Eckert
    Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 733, 80-86 (2018)
  • Ultrafine-grained CuAg7Zr0.05 alloy with fully recrystallized microstructure
    Tian Y.Z., T. Xiong, S.J. Zheng, Y. Bai, J. Freudenberger, R. Pippan, Z.F. Zhang
    Materialia, 162-168 (2018)
  • Effect of boron addition on thermal and mechanical properties of Co-Cr-Mo-C-(B) glass-forming alloys
    Kim J.T., S.H. Hong, X. Bian, P.K. Gokuldoss, K. Song, J. Eckert, J.M. Park, K.B. Kim
    Intermetallics, 99, 1-7 (2018)
  • How softwood tree branches are attached to stems: hierarchical extension of Shigo's stem-branch model
    Müller U., W. Gindl-Altmutter, J. Keckes
    Trees-Struct. Funct., 32, 1113-1121 (2018)
  • Correlation between Electrical Transport and Nanoscale Strain in InAs/In0.6Ga0.4As Core-Shell Nanowires
    Zeng L., C. Gammer, B. Ozdol, T. Nordqvist, J. Nygard, P. Krogstrup, A.M. Minor, W. Jaeger, E. Olsson
    Nano Lett., 18, 4949-4956 (2018)
  • Microstructure Evolution in a 6082 Aluminium Alloy during Thermomechanical Treatment
    Poletti C., R. Bureau, P. Loidolt, P. Simon, S. Mitsche, M. Spuller
    Materials, 11, ARTN 1319 (2018)
  • Nanoindentation study of macerals in coals from the Ukrainian Donets Basin
    Vranjes S., D. Misch, T. Schöberl, D. Kiener, D. Gross, F.R. Sachsenhofer
    Advances in Geosciences (ADGEO), 73-83 (2018)
  • Effect of processing temperature on the microstructural characteristics of Cu-Ag nanocomposites: From supersaturation to complete phase decomposition
    Kormout K.S., P. Ghosh, A. Bachmaier, A. Hohenwarter, R. Pippan
    Acta Mater., 33-44 (2018)
  • Insight into the structural evolution during TiN film growth via atomic resolution TEM
    Xu Z., Z. Zhang, M. Bartosik, Y. Zhang, P.H. Mayrhofer, Y. He
    J. Alloy. Compd., 754, 257-267 (2018)
  • In-situ TEM observation of {101¯2} twin-dominated deformation of Mg pillars: Twinning mechanism, size effects and rate dependency
    Jeong J., M. Alfreider, R. Konetschnig, D. Kiener, S. Oh
    Acta Materialia, 407-421 (2018)
  • Metal release and cell biological compatibility of beta-type Ti-40Nb containing indium
    Pilz S., A. Gebert, A. Voss, S. Oswald, M. Goettlicher, U. Hempel, J. Eckert, M. Rohnke, J. Janek, M. Calin
    J. Biomed. Mater. Res. Part B, 106, 1686-1697 (2018)
  • Mechanical Behavior at the Nanoscale: What's in your Toolbox?
    Cordill M.J., C.R. Weinberger
    JOM, 70, 1065-1067 (2018)
  • The cyclic R-curve - Determination, problems, limitations and application
    Maierhofer J., S. Kolitsch, R. Pippan, H. Gaenser, M. Madia, U. Zerbst
    Eng. Fract. Mech., 198, 45-64 (2018)
  • Introduction of Planar High Pressure Torsion (P-HPT) for Fabrication of Nanostructured Sheets
    Hohenwarter A., R. Pippan
    Adv. Eng. Mater., 20, 1-7 (2018)
  • Analytische Betrachtung der Bruchmechanismen in AlSiCu-Gusslegierungen
    Papenberg N., S. Bozorgi, R. Pippan
    Materialwiss. Werkstofftech., 49, 934-941 (2018)
  • Influence of Processing Parameters on the Mechanical Properties of HPT‐Deformed Nickel/Carbon Nanotube Composites
    Katzensteiner A., T. Müller, K. Kormout, K. Aristizabal, S. Suarez, R. Pippan, A. Bachmaier
    Advanced Engineering Materials (ADV ENG MATER), 1-9 (2018)
  • In-situ elastic-plastic fracture mechanics on the microscale by means of continuous dynamical testing
    Alfreider M., D. Kozic, O. Kolednik, D. Kiener
    Mater. Des., 148, 177-187 (2018)
  • Universally scaling Hall-Petch-like relationship in metallic glass matrix composites
    Liu Y.Y., P.Z. Liu, J.J. Li, P.K. Liaw, F. Spieckermann, D. Kiener, J.W. Qiao, J. Eckert
    Int. J. Plast., 105, 225-238 (2018)
  • Microstructural Characterization of a Laser Surface Remelted Cu-Based Shape Memory Alloy
    da Silva M., P. Gargarella, W. Wolf, T. Gustmann, C. Kiminami, S. Pauly, J. Eckert, C. Bolfarini
    Mater. Res.-Ibero-am. J. Mater., 21, UNSP e20171044 (2018)
  • Microstructure and mechanical properties of hierarchical multi-phase composites based on Al-Ni-type intermetallic compounds in the Al-Ni-Cu-Si alloy system
    Kim J.T., S.H. Hong, J.M. Park, J. Eckert, K.B. Kim
    J. Alloy. Compd., 749, 205-210 (2018)
  • Finishing of Ge nanomachined surfaces for X-ray crystal optics
    Jergel M., Y. Halahovets, I. Matko, D. Korytar, Z. Zaprazny, J. Hagara, P. Nadazdy, P. Siffalovic, J. Keckes, E. Majkova
    Int. J. Adv. Manuf. Technol., 96, 3603-3617 (2018)
  • Ductile bulk metallic glass by controlling structural heterogeneities
    Scudino S., J.J. Bian, H. Shakur Shahabi, D. Sopu, J. Sort, J. Eckert, G. Liu
    Sci Rep, 8, ARTN 9174 (2018)
  • Dual self-organised shear banding behaviours and enhanced ductility in phase separating Zr-based bulk metallic glasses
    Zhang Z.Q., K.K. Song, B.A. Sun, L. Wang, W.C. Cui, Y.S. Qin, X.L. Han, Q.S. Xue, C.X. Peng, B. Sarac, F. Spieckermann, I. Kaban, J. Eckert
    Philos. Mag., 98, 1744-1764 (2018)
  • Thermal behavior, structural relaxation and magnetic study of a new Hf-microalloyed Co-based glassy alloy with high thermal stability
    Taghvaei A.H., N.G. Shirazifard, P. Ramasamy, J. Bednarcik, J. Eckert
    J. Alloy. Compd., 748, 553-560 (2018)
  • Multiscale analysis of nanoindentation-induced defect structures in gum metal
    Sankaran R.P., V.B. Ozdol, C. Ophus, J. Kacher, C. Gammer, S. Govindjee, A.M. Minor, J.W. Morris Jr.
    Acta Mater., 151, 334-346 (2018)
  • Understanding the effect of surface flaws on the strength distribution of brittle single crystals
    Gruber M., A. Leitner, I. Kraleva, D. Kiener, P. Supancic, R. Bermejo
    Journal of the American Ceramic Society, 5705-5716 (2018)
  • High Temperature Flow Behavior of Ultra-Strong Nanoporous Au assessed by Spherical Nanoindentation.
    Leitner A., V. Maier-Kiener, D. Kiener
    Nanomaterials, 1-12 (2018)
  • Electrosorption of Hydrogen in Pd-Based Metallic Glass Nanofilms
    Sarac B., T. Karazehir, M. Mühlbacher, B. Kaynak, C. Gammer, T. Schöberl, A. Sarac Sezai, J. Eckert
    ACS Applied Energy Materials, A-Q (2018)
  • Interfacial mutations in the Al-polyimide system
    Putz B., G. Milassin, Y. Butenko, B. Voelker, C. Gammer, C. Semprimoschnig, M.J. Cordill
    Surf. Interface Anal., 50, 579-586 (2018)
  • Room temperature plasticity and phase transformation of nanometer-sized transition alumina nanoparticles under pressure
    Issa I., L. Joly-Pottuz, J. Rethore, C. Esnouf, T. Douillard, V. Garnier, J. Chevalier, S. Le Floch, D. Machon, K. Masenelli-Varlot
    Acta Mater., 150, 308-316 (2018)
  • Influence of Annealing on Microstructure and Mechanical Properties of a Nanocrystalline CrCoNi Medium-Entropy Alloy
    Schuh B., B. Voelker, J. Todt, K. Kormout, N. Schell, A. Hohenwarter
    Materials, 11, ARTN 662 (2018)
  • Lattice Correspondence and Growth Structures of Monoclinic Mg4Zn7 Phase Growing on an Icosahedral Quasicrystal
    Singh A., J.M. Rosalie
    Crystals, 8, ARTN 194 (2018)
  • Electrodeposition of Fe-C Alloys from Citrate Baths: Structure, Mechanical Properties, and Thermal Stability
    Müller T., J. Grimwood, A. Bachmaier, R. Pippan
    Metals, 8, ARTN 363 (2018)
  • Influence of Powder Characteristics on Processability of AlSi12 Alloy Fabricated by Selective Laser Melting
    Baitimerov R., P. Lykov, D. Zherebtsov, L. Radionova, A. Shultc, K.G. Prashanth
    Materials, 1-14 (2018)
  • Nanoindentation creep behavior of Cu–Zr metallic glass films
    Gruber M., A. Leitner, D. Kiener, P. Supancic, R. Bermejo
    Materials and Design, 221-231 (2018)
  • Surface structure and properties of metallic glasses
    Louzguine-Luzgin D.V., S. Ketov, A.S. Trifonov, A.Y. Churymov
    J. Alloy. Compd., 742, 512-517 (2018)
  • Local nanoscale strain mapping of a metallic glass during in situ testing
    Gammer C., C. Ophus, T.C. Pekin, J. Eckert, A.M. Minor
    Appl. Phys. Lett., 112, ARTN 171905 (2018)
  • Nanostructured Low Carbon Steels Obtained from the Martensitic State via Severe Plastic Deformation, Precipitation, Recovery, and Recrystallization
    Müller T., A. Bachmaier, A. Stark, N. Schell, R. Pippan
    Advanced Engineering Materials, 1-8 (2018)
  • Anisotropic elastic properties and phase stability of B2 and B19 CuZr structures under hydrostatic pressure
    Li F.X., P.D. Hao, J.H. Yi, D. Sopu, J. Tan, X.Y. Chong, J. Eckert
    Intermetallics, 98, 60-68 (2018)
  • Fracture toughness of Ti-Si-N thin films
    Bartosik M., R. Hahn, Z.L. Zhang, I. Ivanov, M. Arndt, P. Polcik, P.H. Mayrhofer
    Int. J. Refract. Met. Hard Mat., 72, 78-82 (2018)
  • Microstructure and strength of nano-/ultrafine-grained carbon nanotube-reinforced titanium composites processed by high-pressure torsion
    Li F.X., P.D. Hao, J.H. Yi, Z. Chen, K.G. Prashanth, T. Maity, J. Eckert
    Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 722, 122-128 (2018)
  • A heat treatable TiB2/A1-3.5Cu-1.5Mg-1Si composite fabricated by selective laser melting: Microstructure, heat treatment and mechanical properties
    Wang P., C. Gammer, F. Brenne, T. Niendorf, J. Eckert, S. Scudino
    Composites Part B, 147, 162-168 (2018)
  • Origin of large plasticity and multiscale effects in iron-based metallic glasses
    Sarac B., Y.P. Ivanov, A. Chuvilin, T. Schoeberl, M. Stoica, Z. Zhang, J. Eckert
    Nat. Commun., 9, 1-10 (2018)
  • Matching in-situ and ex-situ recorded stress gradients in an AlxGa1 − xN Heterostructure: Complementary wafer curvature analyses in time and space
    Reisinger M., C. Ostermaier, M. Tomberger, J. Zechner, B. Sartory, W. Ecker, I. Daumiller, J. Keckes
    Scripta Materialia, 147, 50-54 (2018)
  • A special purpose Trefftz-element for mode III crack tip loading
    Hartmann J., T. Heubrandtner, K. Kunter, R. Pippan, B. Fellner, J.-D. Martinez
    Eng. Fract. Mech., 192, 210-224 (2018)
  • Effect of composition on the structure of lithium- and manganese-rich transition metal oxides
    Shukla A.K., Q.M. Ramasse, C. Ophus, D.M. Kepaptsoglou, F.S. Hage, C. Gammer, C. Bowling, P.A.H. Gallegos, S. Venkatachalam
    Energy Environ. Sci., 11, 830-840 (2018)
  • Bulk metallic dual phase glasses by severe plastic deformation
    Krämer L., Y. Champion, K.S. Kormout, V. Maier-Kiener, R. Pippan
    Intermetallics, 94, 172-178 (2018)
  • Influence of silicon content on microstructure and mechanical properties of Ti-Cr-Si alloys
    Hwang Y.J., S.H. Hong, Y.S. Kim, H.J. Park, Y.B. Jeong, J.T. Kim, K.B. Kim
    J. Alloy. Compd., 737, 53-57 (2018)
  • In situ nanobeam electron diffraction strain mapping of planar slip in stainless steel
    Pekin T.C., C. Gammer, J. Ciston, C. Ophus, A.M. Minor
    Scr. Mater., 146, 87-90 (2018)
  • Gradient residual strain and stress distributions in a high pressure torsion deformed iron disk revealed by high energy X-ray diffraction
    Todt J., J. Keckes, G. Winter, P. Staron, A. Hohenwarter
    Scr. Mater., 178-181 (2018)
  • Thermomechanical processing of In-containing beta-type Ti-Nb alloys
    Pilz S., D. Geissler, M. Calin, J. Eckert, M. Zimmermann, J. Freudenberger, A. Gebert
    J. Mech. Behav. Biomed. Mater., 79, 283-291 (2018)
  • Additive Manufacturing of a 316L Steel Matrix Composite Reinforced with CeO2 Particles: Process Optimization by Adjusting the Laser Scanning Speed
    Salman O., A. Funk, A. Waske, J. Eckert, S. Scudino
    TECHNOLOGIES, 6, ARTN 25 (2018)
  • Liquid ejection temperature dependence of structure and glass transition behavior for rapidly solidified Zr-Al-M (M=Ni, Cu or Co) ternary glassy alloys
    Wang X.H., A. Inoue, J.F. Zhao, F.L. Kong, S.L. Zhu, I. Kaban, M. Stoica, S. Oswald, C. Fan, E. Shalaan, F. Al-Marzouki, J. Eckert, F.X. Yin, Q. Li
    J. Alloy. Compd., 739, 1104-1114 (2018)
  • Microstructures, Martensitic Transformation, and Mechanical Behavior of Rapidly Solidified Ti-Ni-Hf and Ti-Ni-Si Shape Memory Alloys
    Han X.L., K.K. Song, L.M. Zhang, H. Xing, B. Sarac, F. Spieckermann, T. Maity, M. Muehlbacher, L. Wang, I. Kaban, J. Eckert
    J. Mater. Eng. Perform., 27, 1005-1015 (2018)
  • Review Article: Stress in thin films and coatings: Current status, challenges, and prospects
    Abadias G., E. Chason, J. Keckes, M. Sebastiani, G.B. Thompson, E. Barthel, G.L. Doll, C.E. Murray, C.H. Stoessel, L. Martinu
    J. Vac. Sci. Technol. A, 36, ARTN 020801 (2018)
  • Cross-sectional TEM study of subsurface damage in SPDT machining of germanium optics
    Korytar D., Z. Zaprazny, C. Ferrari, C. Frigeri, M. Jergel, I. Matko, J. Keckes
    Appl. Optics, 57, 1940-1943 (2018)
  • Investigation of Color Change in Cu-Zn Alloys by Reflectivity and Color Difference Analysis
    Jeong Y.B., S.H. Hong, H.J. Park, Y.S. Kim, J.T. Kim, H.D. Lee, Y.J. Hwang, Y.H. Lee, K.B. Kim
    Korean J. Met. Mater., 56, 171-176 (2018)
  • A new device for high-temperature in situ GISAXS measurements
    Fritz-Popovski G., S.C. Bodner, F. Sosada-Ludwikowska, G.A. Maier, R. Morak, L. Chitu, L. Bruegemann, J. Lange, H.G. Krane, O. Parise
    Rev. Sci. Instrum., 89, ARTN 035103 (2018)
  • Martensitic Transformation and Plastic Deformation of TiCuNiZr-Based Bulk Metallic Glass Composites
    Sun H., K. Song, X. Han, H. Xing, X. Li, S. Wang, J.T. Kim, N. Chawake, T. Maity, L. Wang, J. Eckert
    Metals, 8, ARTN 196 (2018)
  • Atomistic origins of the differences in anisotropic fracture behaviour of LiTaO3 and LiNbO3 single crystals
    Gruber M., R. Konetschnik, M. Popov, J. Spitaler, P. Supancic, D. Kiener
    Acta Materialia, 150, 373-380 (2018)
  • In situ atomic-scale observation of oxidation and decomposition processes in nanocrystalline alloys
    Guo J., G. Haberfehlner, J. Rosalie, L. Li, M.J. Duarte, G. Kothleitner, G. Dehm, Y. He, R. Pippan, Z. Zhang
    Nat. Commun., 9, ARTN 946 (2018)
  • An investigation on shear banding and crystallographic texture of Ag–Cu alloys deformed by high-pressure torsion
    Ghosh P., K. Kormout, J. Todt, U. Lienert, J. Keckes, R. Pippan
    Journal of mechanical science, 1-13 (2018)
  • Two-stage cracking of metallic bi-layers on polymer substrates under tension
    Putz B., C. May-Miller, V. Matl, B. Völker, D.M. Többens, C. Semprimoschnig, M.J. Cordill
    Scripta Materialia, 145, 5-8 (2018)
  • Novel synthesis of core-shell Au-Pt dendritic nanoparticles supported on carbon black for enhanced methanol electro-oxidation
    Cao R., T. Xia, R. Zhu, Z. Liu, J. Guo, G. Chang, Z. Zhang, X. Liu, Y. He
    Appl. Surf. Sci., 433, 840-846 (2018)
  • Essential refinements of spherical nanoindentation protocols for the reliable determination of mechanical flow curves
    Leitner A., V. Maier-Kiener, Kiener D.
    Materials and Design, 146, 69-80 (2018)
  • Effects of new beta-type Ti-40Nb implant materials, brain-derived neurotrophic factor, acetylcholine and nicotine on human mesenchymal stem cells of osteoporotic and non osteoporotic donors
    Kauschke V., A. Gebert, M. Calin, J. Eckert, S. Scheich, C. Heiss, K.S. Lips
    PLoS One, 13, ARTN e0193468 (2018)
  • Verification of correlation between densification during spark plasma sintering and compressive creep of ultrafine-grained in-situ Al2O3-reinforced B2 aluminide matrix composites
    Chawake N., N.T.B.N. Koundinya, R.S. Kottada
    J. Alloy. Compd., 735, 1921-1930 (2018)
  • Nanoscale residual stress depth profiling by Focused Ion Beam milling and eigenstrain analysis
    Korsunsky A.M., E. Salvati, A.G.J. Lunt, T. Sui, M.Z. Mughal, R. Daniel, J. Keckes, E. Bemporad, M. Sebastiani
    Materials and Design, 55-64 (2018)
  • Exceptionally high nanoscale wear resistance of a Cu47Zr45Al8 metallic glass with native and artificially grown oxide
    Louzguine-Luzgin D.V., M. Ito, S.V. Ketov, A.S. Trifonov, J. Jiang, C.L. Chen, K. Nakajima
    Intermetallics, 93, 312-317 (2018)
  • Fabrication of Al-Zn solid solution via friction stir processing
    Yadav D., R. Bauri, N. Chawake
    Mater. Charact., 136, 221-228 (2018)
  • On the reinforcement homogenization in CNT/metal matrix composites during severe plastic deformation
    Aristizabal K., A. Katzensteiner, A. Bachmaier, F. Muecklich, S. Suarez
    Mater. Charact., 375-381 (2018)
  • Strain Distribution Across an Individual Shear Band in Real and Simulated Metallic Glasses
    Scudino S., D. Sopu
    Nano Letters, 18, 1221-1227 (2018)
  • Anisotropy in local microstructure - Does it affect the tensile properties of the SLM samples?
    Maity T., N. Chawake, J.T. Kim, J. Eckert, K.G. Prashanth
    Manufacturing Letters, 15PA, 33-37 (2018)
  • Local-structure change rendered by electronic localization-delocalization transition in cerium-based metallic glasses
    Luo Q., B. Schwarz, J.C. Swarbrick, J. Bednarcik, Y. Zhu, M. Tang, L. Zheng, R. Li, J. Shen, J. Eckert
    Phys. Rev. B, 97, ARTN 064104 (2018)
  • Mechanical properties of electrodeposited amorphous/crystalline multilayer structures in the Fe-P system
    Müller T., A. Bachmaier, R. Konetschnik, T. Schöberl, R. Pippan
    Materials Science & Engineering A, 715, 83-91 (2018)
  • Amorphous martensite in beta-Ti alloys
    Zhang L., H. Zhang, X. Ren, J. Eckert, Y. Wang, Z. Zhu, T. Gemming, S. Pauly
    Nat. Commun., 9, ARTN 506 (2018)
  • To the design of highly fracture-resistant composites by the application of the yield stress inhomogeneity effect
    Sistaninia M., R. Kasberger, O. Kolednik
    Composite Structures, 185, 113-122 (2018)
  • Influence of solute effects on the saturation grain size and rate sensitivity in Cu-X alloys
    Bruder E., P. Braun, H. Rehman, R.K.W. Marceau, A.S. Taylor, R. Pippan, K. Durst
    Scripta Materialia, 144, 5-8 (2018)
  • Thermally-triggered Dual In-situ Self-healing Metallic Materials
    Kim J.T., H.J. Kim, S.H. Hong, H.J. Park, Y.S. Kim, Y.J. Hwang, Y.B. Jeong, J.-Y. Park, J.M. Park, B. Sarac, W.-M. Wang, J. Eckert, K.B. Kim
    Sci Rep, 8, ARTN 2120 (2018)
  • Cross-sectional characterization techniques as the basis for knowledge-based design of graded CVD TiN-TiB2 coatings
    Tkadletz M., N. Schalk, C. Mitterer, J. Keckes, M. Pohler, C. Czettl
    International Journal of Refractory Metals and Hard Materials, 280-284 (2018)
  • Elastostatic reversibility in thermally formed bulk metallic glasses: nanobeam diffraction fluctuation electron microscopy
    Sarac B., C. Gammer, L. Deng, E. Park, Y. Yokoyama, M. Stoica, J. Eckert
    Nanoscale, 10, 1081-1089 (2018)
  • High strength nanostructured Al-based alloys through optimized processing of rapidly quenched amorphous precursors
    Kim S.-Y., G.-Y. Lee, G.-H. Park, H.-A. Kim, A.-Y. Lee, S. Scudino, Konda Gokuldoss P., D.-H. Kim, J. Eckert, M.-H. Lee
    Scientific Reports, 8, ARTN 1090 (2018)
  • Precipitate strengthening and thermal stability in three component metallic nanolaminate thin films
    Schoeppner R.L., A.A. Taylor, M.J. Cordill, H.M. Zbib, J. Michler, D.F. Bahr
    Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 485-492 (2018)
  • Prediction of the mechanical behaviour of pearlitic steel based on microcompression tests, micromechanical models and homogenization approaches
    Ekh M., N. Larijani, E. Dartfeldt, M. Kapp, R. Pippan
    Eur. J. Mech. A-Solids, 67, 272-279 (2018)
  • Microstructure and mechanical properties of a heat-treatable Al-3.5Cu-1.5Mg-1Si alloy produced by selective laser melting
    Wang P., C. Gammer, F. Brenne, K.G. Prashanth, R.G. Mendes, M.H. Ruemmeli, T. Gemming, J. Eckert, S. Scudino
    Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 711, 562-570 (2018)
  • Crack driving forces for short cracks: The effect of work hardening
    Kolitsch S., R. Pippan
    Eng. Fract. Mech., 187, 262-271 (2018)
  • Mechanical and Tribological Properties of Al2O3-TiC Composite Fabricated by Spark Plasma Sintering Process with Metallic (Ni, Nb) Binders
    Kumar R., A.K. Chaubey, T. Maity, Konda Gokuldoss P.
    Metals, 8, ARTN 50 (2018)
  • Influence of Nb on the Microstructure and Fracture Toughness of (Zr0.76Fe0.24)100−xNbx Nano-Eutectic Composites
    Maity T., A. Dutta, P.P. Jana, P. Konda Gokuldoss, J. Eckert, J. Das
    Materials, 11, ARTN 113 (2018)
  • On cryothermal cycling as a method for inducing structural changes in metallic glasses
    Ketov S., A.S. Trifonov, Y.P. Ivanov, A. Churyumov, A. Lubenchenko, A. Batrakov, J. Jiang, D. Louzguine-Luzgin, J. Eckert, J. Orava, A. Greer
    NPG Asia Materials, 10, 137-145 (2018)
  • Influence of severe plastic deformation and specimen orientation on the fatigue crack propagation behavior of a pearlitic steel
    Leitner T., G. Trummer, R. Pippan, A. Hohenwarter
    Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 710, 260-270 (2018)
  • Electrically reversible cracks in an intermetallic film controlled by an electric field
    Liu Z.Q., J.H. Liu, M.D. Biegalski, J.-M. Hu, S.L. Shang, Y. Ji, J.M. Wang, S.L. Hsu, A.T. Wong, M.J. Cordill, B. Gludovatz, C. Marker, H. Yan, Z.X. Feng, L. You, M.W. Lin, T.Z. Ward, Z.K. Liu, C.B. Jiang, L.Q. Chen, R.O. Ritchie, H.M. Christen, R. Ramesh
    Nat. Commun., ARTN 41 (2018)
  • The effect of residual stresses and strain reversal on the fracture toughness of TiAl alloys
    Appel F., J.D.H. Paul, P. Staron, M. Oehring, O. Kolednik, J. Predan, F.D. Fischer
    Materials Science & Engineering A, 709, 17-29 (2018)
  • Nanoindentation creep behavior of Cu–Zr metallic glass films
    Wang Y., J. Zhang, K. Wu, G. Liu, D. Kiener, J. Sun
    Materials Research Letters, 6, 22-28 (2018)
  • Thermodynamic instability of a nanocrystalline, single-phase TiZrNbHfTa alloy and its impact on the mechanical properties
    Schuh B., B. Voelker, J. Todt, N. Schell, L. Perriere, J. Li, J.P. Couzinie, A. Hohenwarter
    Acta Mater., 142, 201-212 (2018)
  • The corrosion resistance in artificial saliva of titanium and Ti-13Nb-13Zr alloy processed by high pressure torsion
    Barjaktarevic D., J. Bajat, I. Cvijovic-Alagic, I. Dimic, A. Hohenwarter, V. Dokic, M. Rakin
    Procedia Structural Integrity, 13, 1834-1839 (2018)
  • Microstructural influence on the cyclic electro-mechanical behaviour of ductile films on polymer substrates
    Cordill M.J., O. Glushko, A. Kleinbichler, B. Putz, D.M. Toebbens, C. Kirchlechner
    Thin Solid Films, 644, 166-172 (2017)
  • Influence of solid solution strengthening on the local mechanical properties of single crystal and ultrafine-grained binary Cu–AlX solid solutions
    Maier-Kiener V., X. An, L. Li, Z. Zhang, R. Pippan, K. Durst
    Journal of Materials Research, 32, 4583-4591 (2017)
  • Strain dependence of diffusion in Zr-based bulk amorphous alloy
    Lee A.-Y., J.-K. Song, H.-R. Oh, H. Kim, S.-Y. Kim, A.-R. Kwon, E.-S. Park, C.-H. Lim, J. Eckert, M.-H. Lee
    JOURNAL OF APPLIED PHYSICS, 122, ARTN 245105 (2017)
  • Powder metallurgy of Al-based composites reinforced with Fe-based glassy particles: Effect of microstructural modification
    Balci Ö., P. Konda Gokuldoss, S. Scudino, M. Somer, J. Eckert
    Particulate Science and Technology, 1-6 (2017)
  • Combined TEM and XPS studies of metal - polymer interfaces for space applications
    Putz B., G. Milassin, Y. Butenko, B. Völker, C. Gammer, C. Semprimoschnig, M.J. Cordill
    Surface and Coatings Technology, 332, 368-375 (2017)
  • Annealing effects on the film stress and adhesion of tungsten-titanium barrier layers
    Kleinbichler A., J. Todt, J. Zechner, S. Wöhlert, D.M. Többens, M.J. Cordill
    Surface and Coatings Technology, 332, 376-381 (2017)
  • Inkjet Printed Wiring Boards with Vertical Interconnect Access on Flexible, Fully Compostable Cellulose Substrates
    Samusjew A., A. Lassnig, M.J. Cordill, K.K. Krawczyk, T. Griesser
    Advanced Materials Technologies, 2017, ARTN 1700250 (2017)
  • Effect of Multiple Alloying Elements on the Glass-Forming Ability, Thermal Stability, and Crystallization Behavior of Zr-Based Alloys
    Bazlov A.I., A.A. Tsarkov, S.V. Ketov, C. Suryanarayana, D.V. Louzguine-Luzgin
    Metallurgical and Materilas Transactions A (2017)
  • Interface and stability analysis of Tantalum- and Titanium nitride thin films onto Lithiumniobate
    Vogel U., S. Oswald, J. Eckert
    Appl. Surf. Sci., 425, 254-260 (2017)
  • Designing a multifunctional Ti-2Cu-4Ca porous biomaterial with favorable mechanical properties and high bioactivity
    Zhang L., Z.Y. He, J. Tan, M. Calin, K.G. Prashanth, B. Sarac, B. Voelker, Y.H. Jiang, R. Zhou, J. Eckert
    J. Alloy. Compd., 727, 338-345 (2017)
  • Influence of spherical particles and interfacial stress distribution on viscous flow behavior of Ti-Cu-Ni-Zr-Sn bulk metallic glass composites
    Hong S.H., J.T. Kim, S.C. Mun, Y.S. Kim, H.J. Park, Y.S. Na, K.R. Lim, J.M. Park, K.B. Kim
    Intermetallics, 91, 90-94 (2017)
  • High-throughput study of binary thin film tungsten alloys
    Nikolic V., S. Wurster, A. Savan, A. Ludwig, R. Pippan
    Int. J. Refract. Met. Hard Mat., 69, 40-48 (2017)
  • Study of the structural defects on carbon nanotubes in metal matrix composites processed by severe plastic deformation
    Aristizabal K., A. Katzensteiner, A. Bachmaier, F. Muecklich, S. Suarez
    Carbon, 125, 156-161 (2017)
  • A combined experimental and theoretical investigation of the Al-Melamine reactive milling system: A mechanistic study towards AlN-based ceramics
    Rounaghi S.A., D.E.P. Vanpoucke, H. Eshghi, S. Scudino, E. Esmaeili, S. Oswald, J. Eckert
    J. Alloy. Compd., 729, 240-248 (2017)
  • Powder metallurgical processing of low modulus beta-type Ti-45Nb to bulk and macro-porous compacts
    Schmidt R., S. Pilz, I. Lindemann, C. Damm, J. Hufenbach, A. Helth, D. Geissler, A. Henss, M. Rohnke, M. Calin, M. Zimmermann, J. Eckert, M.H. Lee, A. Gebert
    Powder Technol., 322, 393-401 (2017)
  • Phase evolution and carbon redistribution during continuous tempering of martensite studied with high resolution techniques
    Vieweg A., E. Povoden-Karadeniz, G. Ressel, P. Prevedel, T. Wojcik, F. Mendez-Martin, A. Stark, J. Keckes, E. Kozeschnik
    Mater. Des., 136, 214-222 (2017)
  • Optimization of the Hot Forging Processing Parameters for Powder Metallurgy Fe-Cu-C Connecting Rods Based on Finite Element Simulation
    Li F., J. Yi, J. Eckert
    Metall. Mater. Trans. A-Phys. Metall. Mater. Sci., 48A, 6027-6037 (2017)
  • Cyclically induced grain growth within shear bands investigated in UFG Ni by cyclic high pressure torsion
    Kapp M.W., O. Renk, T. Leitner, P. Ghosh, B. Yang, R. Pippan
    J. Mater. Res., 32, 4317-4326 (2017)
  • Dependence of fracture strain on flaw size in rail switches—Experiments and theoretical modelling
    Kolitsch S., H.-P. Gänser, R. Pippan
    Engineering Failure Analysis, 85, 50-61 (2017)
  • Structural modification through pressurized sub-Tg annealing of metallic glasses
    Foroughi A., H. Ashuri, R. Tavakoli, M. Stoica, D. Sopu, J. Eckert
    Journal of Applied Physics, 122, ARTN 215106 (2017)
  • Fracture toughness and structural evolution in the TiAlN system upon annealing
    Bartosik M., C. Rumeau, R. Hahn, Z.L. Zhang, P.H. Mayrhofer
    Sci Rep, 7, ARTN 16476 (2017)
  • 30 nm X-ray focusing correlates oscillatory stress, texture and structural defect gradients across multilayered TiN-SiOx thin film
    Keckes J., R. Daniel, J. Todt, J. Zalesak, B. Sartory, S. Braun, J. Gluch, M. Rosenthal, M. Burghammer, C. Mitterer, S. Niese, A. Kubec
    Acta Materialia, 862-873 (2017)
  • Bond length deviation in CuZr metallic glasses
    Peng C.X., D. Sopu, K.K. Song, Z.T. Zhang, L. Wang, J. Eckert
    Phys. Rev. B, 96, ARTN 174112, 1-8 (2017)
  • Tailoring the magnetic properties of nanocrystalline Cu-Co alloys prepared by high-pressure torsion and isothermal annealing
    Bachmaier A., H. Krenn, P. Knoll, H. Aboulfadl, R. Pippan
    J. Alloy. Compd., 725, 744-749 (2017)
  • Influencing the crystallization of Fe80Nb10B10 metallic glass by ball milling
    Ramasamy P., R.N. Shahid, S. Scudino, J. Eckert, M. Stoica
    J. Alloy. Compd., 725, 227-236 (2017)
  • New Insights into Nanoindentation-Based Adhesion Testing
    Kleinbichler A., M.J. Pfeifenberger, J. Zechner, N.R. Moody, D.F. Bahr, M.J. Cordill
    JOM, 69, 2237-2245 (2017)
  • Microstructure evolution and mechanical properties of carbon nanotubes reinforced Al matrix composites
    Liu X., C. Li, J. Eckert, K.G. Prashanth, O. Renk, L. Teng, Y. Liu, R. Bao, J. Tao, T. Shen, J. Yi
    Mater. Charact., 133, 122-132 (2017)
  • Giant thermal expansion and alpha-precipitation pathways in Ti-alloys
    Boenisch M., A. Panigrahi, M. Stoica, M. Calin, E. Ahrens, M. Zehetbauer, W. Skrotzki, J. Eckert
    Nat. Commun., 8, ARTN 1429 (2017)
  • Wetting behavior and reactivity between liquid Gd and ZrO2 substrate
    Turalska P., M. Homa, G. Bruzda, N. Sobczak, I. Kaban, N. Mattern, J. Eckert
    Journal of Mining and Metallurgy, Section B: Metallurgy, 53, 285-293 (2017)
  • Atomic-Level Processes of Shear Band Nucleation in Metallic Glasses
    Sopu D., A. Stukowski, M. Stoica, S. Scudino
    Physical Review Letters, 119, ARTN 195503 (2017)
  • Substrate-Influenced Thermo-Mechanical Fatigue of Copper Metallizations: Limits of Stoney's Equation
    Bigl S., S. Wurster, M.J. Cordill, D. Kiener
    Materials, 10, ARTN 1287 (2017)
  • Structural modifications in sub-T-g annealed CuZr-based metallic glass
    Sarac B., A. Bernasconi, J. Wright, M. Stoica, F. Spieckermann, M. Muehlbacher, J. Keckes, X. Bian, G. Wang, J. Eckert
    Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 707, 245-252 (2017)
  • Rapid and partial crystallization to design ductile CuZr-based bulk metallic glass composites
    Song K.K., X.L. Han, S. Pauly, Y.S. Qin, K. Kosiba, C.X. Peng, J.H. Gong, P.X. Chen, L. Wang, B. Sarac, S. Ketov, M. Mühlbacher, F. Spieckermann, I. Kaban, J. Eckert
    Materials and Design, 139, 132-140 (2017)
  • Dominating deformation mechanisms in ultrafine-grained chromium across length scales and temperatures
    Fritz R., D. Wimler, A. Leitner, V. Maier-Kiener, D. Kiener
    Acta Materialia, 140, 176-187 (2017)
  • Resolving alternating stress gradients and dislocation densities across Al x Ga 1-x N multilayer structures on Si(111)
    Reisinger M., M. Tomberger, J. Zechner, I. Daumiller, B. Sartory, W. Ecker, J. Keckes, R.T. Lechner
    Applied Physics Letters, 111, ARTN 162103 (2017)
  • Transparent magnetic semiconductor with embedded metallic glass nano-granules
    Chen N., H. Li, A. Hirata, Z. Luo, Z. Wang, W. Liu, B. Cui, T. Hitosugi, L. Gu, X. Zhang, X. Zhang, C. Song, X. Wang, L. Zhang, J. Cao, K. Ohmura, S.V. Ketov, K. Yaoa, M. Chen, D.V. Louzguine-Luzgin
    Materials and Design, 132, 208-214 (2017)
  • Fracture Mechanism of Coronal Teenage Dentin
    Panfilov P.E., A.V. Kabanova, I.N. Borodin, J. Guo, Z. Zang
    RUSSIAN METALLURGY, 879-883 (2017)
  • Die Elektronik dehnen, bis sie bricht
    Schmidt V.
    Die Presse (2017)
  • New beta-type Ti-Fe-Sn-Nb alloys with superior mechanical strength
    Zhao G.-H., S.V. Ketov, J. Jiang, H. Mao, A. Borgenstam, D.V. Louzguine-Luzgin
    Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 705, 348-351 (2017)
  • Synthesis and evaluation of new radical photoinitiators bearing trialkoxysilyl groups for surface immobilization
    Roszkowski P., M. Sahin, S. Ayalur-Karunakaran, C. Gammer, S. Schloegl, W. Kern, K.K. Krawczyk
    Polymer, 129, 207-220 (2017)
  • Atomic origin for rejuvenation of a Zr-based metallic glass at cryogenic temperature
    Bian X.L., G. Wang, J. Yi, Y.D. Jia, J. Bednarcik, Q.J. Zhai, I. Kaban, B. Sarac, M. Muehlbacher, F. Spieckermann, J. Keckes, J. Eckert
    J. Alloy. Compd., 718, 254-259 (2017)
  • A correlative experimental and ab initio approach to improve the fracture behavior of Mo thin films by alloying with Cu
    Joerg T., D. Music, M.J. Cordill, R. Franz, H. Koestenbauer, C. Linke, J. Winkler, J.M. Schneider, C. Mitterer
    Appl. Phys. Lett., 111, ARTN 134101 (2017)
  • Wetting, reactivity, and phase formation at interfaces between Ni–Al melts and TiB2 ultrahigh temperature ceramic
    Xi L., I. Kaban, R. Nowak, G. Bruzda, N. Sobczak, J. Eckert
    Journal of the American Ceramic Society, 101, 911-918 (2017)
  • MnFePSi-Based Magnetocaloric Packed Bed Regenerators: Structural Details Probed by X-Ray Tomography
    Funk A., M. Zeilinger, A. Miehe, D. Sopu, J. Eckert, F. Dötz, A. Waske
    Chemical Engineering Science, 175, 84-90 (2017)
  • Friction welding of selective laser melted Ti6Al4V parts
    Prashanth K.G., R. Damodaram, T. Maity, P. Wang, J. Eckert
    Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 704, 66-71 (2017)
  • Effect of the cooling rate on the mechanical properties of Ti-Ni-Cu-Zr-based crystal/glassy alloys
    Jiang J., S. Ketov, H. Kato, D.V. Louzguine-luzgin
    Materials Science & Engineering A, 704, 147-153 (2017)
  • Effect of temperature on the fatigue-crack growth behavior of the high-entropy alloy CrMnFeCoNi
    Thurston K.V.S., B. Gludovatz, A. Hohenwarter, G. Laplanche, E.P. George, R.O. Ritchie
    Intermetallics, 88, 65-72 (2017)
  • Processing of Ti-5553 with improved mechanical properties via an in-situ heat treatment combining selective laser melting and substrate plate heating
    Schwab H., M. Boenisch, L. Giebeler, T. Gustmann, J. Eckert, U. Kuehn
    Mater. Des., 130, 83-89 (2017)
  • Development of advanced high heat flux and plasma-facing materials
    Linsmeier C., M. Rieth, J. Aktaa, T. Chikada, A. Hoffmann, J. Hoffmann, A. Houben, H. Kurishita, X. Jin, M. Li, A. Litnovsky, S. Matsuo, A. von Mueller, V. Nikolic, T. Palacios, R. Pippan, D. Qu, J. Reiser, J. Riesch, T. Shikama, R. Stieglitz, T. Weber, S. Wurster, J.-H. You, Z. Zhou
    Nucl. Fusion, 57, ARTN 092007 (2017)
  • Dislocation densities and alternating strain fields in CrN/AlN nanolayers
    Gu X., Z. Zhang, M. Bartosik, P.H. Mayrhofer, H. Duan
    Thin Solid Films, 638, 189-200 (2017)
  • Effect of Al2O3 Nanoparticles as Reinforcement on the Tensile Behavior of Al-12Si Composites
    Ma P., Y. Jia, P. Konda Gokuldoss, Z. Yu, S. Yang, J. Zhao, C. Li
    Metals, 7, 1-11 (2017)
  • A Polymer Route to the Design of Thermally Stable Metal Matrix Composites: Materials Selection and In-situ Processing
    Chelliah NM., Sudharsan, L. Kraemer, H. Singh, Surappa MK., R. Raj
    Research and Reports on Metals, 1:3, ARTN 1000108 (2017)
  • Remarkable transitions of yield behavior and Lüders deformation in pure Cu by changing grain sizes
    Tian Y.Z., S. Gao, L.J. Zhao, S. Lu, R. Pippan, Z.F. Zhang, N. Tsuji
    Scripta Materialia, 142, 88-91 (2017)
  • Crack path identification in a nanostructured pearlitic steel using atom probe tomography
    Leitner T., S. Sackl, B. Völker, H. Riedl, H. Clemens, R. Pippan, A. Hohenwarter
    Scripta Materialia, 142, 66-69 (2017)
  • Microstructure and mechanical properties of Al-Cu alloys fabricated by selective laser melting of powder mixtures
    Wang P., K.G. Prashanth, S. Pauly, J. Eckert, S. Scudino
    Journal of Alloys and Compounds, 735, 2263-2266 (2017)
  • Femtosecond laser machining for characterization of local mechanical properties of biomaterials: a case study on wood
    Jakob S., M.J. Pfeifenberger, A. Hohenwarter, R. Pippan
    Sci. Technol. Adv. Mater., 18, 574-583 (2017)
  • Dislocation Movement Induced by Molecular Relaxations in Isotactic Polypropylene
    Spieckermann F., G. Polt, H. Wilhelm, M.B. Kerber, E. Schafler, M. Reinecker, V. Soprunyuk, S. Bernstorff, M. Zehetbauer
    Macromolecules, 50, 6362-6368 (2017)
  • On nanostructured molybdenum-copper composites produced by high-pressure torsion
    Rosalie J.M., J. Guo, R. Pippan, Z. Zhang
    J. Mater. Sci., 52, 9872-9883 (2017)
  • Micropatterning kinetics of different glass-forming systems investigated by thermoplastic net-shaping
    Sarac B., S. Bera, F. Spieckermann, S. Balakin, M. Stoica, M. Calin, J. Eckert
    Scr. Mater., 137, 127-131 (2017)
  • Generation of extreme grain aspect ratios in severely deformed tantalum at elevated temperatures
    Renk O., P. Ghosh, R. Pippan
    Scr. Mater., 137, 60-63 (2017)
  • Tungsten fibre-reinforced composites for advanced plasma facing components
    Neu R., J. Riesch, A.V. Mueller, M. Balden, J.W. Coenen, H. Gietl, T. Hoeschen, M. Li, S. Wurster, J.-H. You
    NUCLEAR MATERIALS AND ENERGY, 12, 1308-1313 (2017)
  • Deformation behavior of Re alloyed Mo thin films on flexible substrates: In situ fragmentation analysis supported by first-principles calculations
    Joerg T., D. Music, F. Hauser, M.J. Cordill, R. Franz, H. Koestenbauer, J. Winkler, J.M. Schneider, C. Mitterer
    Sci Rep, 7, ARTN 7374 (2017)
  • Reordering a deformation disordered intermetallic compound by antiphase boundary movement
    Gammer C., H.P. Karnthaler, C. Rentenberger
    J. Alloy. Compd., 713, 148-155 (2017)
  • Impact of severe plastic deformation on microstructure and fracture toughness evolution of a duplex-steel
    Schwarz K.T., K.S. Kormout, R. Pippan, A. Hohenwarter
    Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 703, 173-179 (2017)
  • Hardening of shear band in metallic glass
    Wang J.G., Y.C. Hu, P.F. Guan, K.K. Song, L. Wang, G. Wang, Y. Pan, B. Sarac, J. Eckert
    Sci Rep, 7, ARTN 7076 (2017)
  • Verformungsinduzierte Übersätigung in unmischbaren Materialsystemen während der Hochdrucktorsionsverformung
    Verformungsinduzierte Übersätigung in unmischbaren Materialsystemen während der Hochdrucktorsionsverformung
    Zeitschrift der Montanuniversität Leoben, 4-5 (2017)
  • An in-situ synchrotron study on microplastic flow of electrodeposited nanocrystalline nickel
    Ghosh P., S. Van Petegem, H. Van Swygenhoven, A.H. Chokshi
    Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 701, 101-110 (2017)
  • From powders to bulk metallic glass composites
    Kraemer L., Y. Champion, R. Pippan
    Sci Rep, 7, ARTN 6651 (2017)
  • Tensile, fracture, and fatigue crack growth properties of a 3D printed maraging steel through selective laser melting
    Suryawanshi J., K.G. Prashanth, U. Ramamurty
    Journal of Alloys and Compounds, 725, 355-364 (2017)
  • In-situ tracking the structural and chemical evolution of nanostructured CuCr alloys
    Zhang Z., J. Guo, G. Dehm, R. Pippan
    Acta Mater., 138, 42-51 (2017)
  • The effect of severe grain refinement on the damage tolerance of a superelastic NiTi shape memory alloy
    Leitner T., E. Sabirov, R. Pippan, A. Hohenwarter
    J. Mech. Behav. Biomed. Mater., 71, 337-348 (2017)
  • Reciprocating sliding wear behavior of high-strength nanocrystalline Al84Ni7Gd6Co3 alloys
    Wang Z., K. Georgarakis, W.W. Zhang, K.G. Prashanth, J. Eckert, S. Scudino
    Wear, 382, 78-84 (2017)
  • Microstructure and abrasive wear behavior of a novel FeCrMoVC laser cladding alloy for high-performance tool steels
    Zeisig J., N. Schaedlich, L. Giebeler, J. Sander, J. Eckert, U. Kuehn, J. Hufenbach
    Wear, 382, 107-112 (2017)
  • Effect of Co additions on the phase formation, thermal stability, and mechanical properties of rapidly solidified Ti-Cu-based alloys
    Gargarella P., S. Pauly, C.S. Kiminami, J. Eckert
    J. Mater. Res., 32, 2578-2584 (2017)
  • Stability of shear banding process in bulk metallic glasses and composites
    Qin Y., X. Han, K. Song, L. Wang, Y. Cheng, Z. Zhang, Q. Xue, N. Sun, J. Wang, B. Sun, B. Sarac, F. Spieckermann, G. Wang, I. Kaban, J. Eckert
    J. Mater. Res., 32, 2560-2569 (2017)
  • Insights into the deformation behavior of the CrMnFeCoNi high-entropy alloy revealed by elevated temperature nanoindentation
    Maier-Kiener V., B. Schuh, E.P. George, H. Clemens, A. Hohenwarter
    J. Mater. Res., 32, 2658-2667 (2017)
  • Development and application of a heated in-situ SEM micro-testing device
    Fritz R., D. Kiener
    Measurement, 110, 356-366 (2017)
  • Characterization of Al/Crystallized Al-Based Metallic Glass Composites Produced by Repeated Roll Bonding Process
    Alizadeh M., S. Khoramkhorshid, A.H. Taghvaei, P. Konda Gokuldoss
    Metals and Materials International, 23, 823-830 (2017)
  • Cryogenic-temperature-induced structural transformation of a metallic glass
    Bian X., G. Wang, Q. Wang, B. Sun, I. Hussain, Q. Zhai, N. Mattern, J. Bednarcik, J. Eckert
    MATERIALS RESEARCH LETTERS, 5, 284-291 (2017)
  • In situ TEM observation of FCC Ti formation at elevated temperatures
    Yu Q., J. Kacher, C. Gammer, R. Traylor, S. Amit, Z. Yang, A.M. Minor
    Scripta Materialia, 140, 9-12 (2017)
  • Ti-Fe-Sn-Nb hypoeutectic alloys with superb yield strength and significant strain-hardening
    Zhao G.-H., S.V. Ketov, H. Mao, A. Borgenstama, D.V. Louzguine-Luzgin
    Scripta Materialia, 135, 59–62 (2017)
  • High resolution residual stress gradient characterization in W/TiN-stack on Si(100): Correlating in-plane stress and grain size distributions in W sublayer
    Hammer R., J. Todt, J. Keckes, B. Sartory, G. Parteder, J. Kraft, S. Defregger
    Mater. Des., 132, 72-78 (2017)
  • β-type Ti-based bulk metallic glass composites with tailored structural metastability
    Zhang L., H. Zhang, W. Li, T. Gemming, P. Wang, M. Boenisch, D. Sopu, J. Eckert, S. Pauly
    J. Alloy. Compd., 708, 972-981 (2017)
  • Additive Manufacturing Processes: Selective Laser Melting, Electron Beam Melting and Binder JettingSelection Guidelines
    Gokuldoss P.K., S. Kolla, J. Eckert
    Materials, 10, ARTN 672 (2017)
  • Experimental and calculation challenges of crack propagation in notches - From initiation to end of lifetime
    Kolitsch S., H.P. Gaenser, R. Pippan
    Int. J. Fatigue, 103, 395-404 (2017)
  • Approximate stress intensity factor solutions for semi-elliptical cracks with large a/W and c/B under tension and bending
    Kolitsch S., H.-P. Gänser, R. Pippan
    Theoretical and Applied Fracture Mechanics, 92, 167-177 (2017)
  • Corrosion properties of high-strength nanocrystalline Al84Ni7Gd6Co3 alloy produced by hot pressing of metallic glass
    Wang Z., S. Scudino, K.G. Prashanth, J. Eckert
    J. Alloy. Compd., 707, 63-67 (2017)
  • Effect of replacing Nb with (Mo and Zr) on glass forming ability, magnetic and mechanical properties of FeCoBSiNb bulk metallic glass
    Ramasamy P., M. Stoica, S. Bera, M. Calin, J. Eckert
    J. Alloy. Compd., 707, 78-81 (2017)
  • Selective laser melting of Al-Zn-Mg-Cu: Heat treatment, microstructure and mechanical properties
    Wang P., H.C. Li, K.G. Prashanth, J. Eckert, S. Scudino
    J. Alloy. Compd., 707, 287-290 (2017)
  • Formation of metastable cellular microstructures in selective laser melted alloys
    Prashanth K.G., J. Eckert
    J. Alloy. Compd., 707, 27-34 (2017)
  • Deformation Behavior of Powder Metallurgy Connecting Rod Preform During Hot Forging Based on Hot Compression and Finite Element Method Simulation
    Li F., J. Yi, J. Eckert
    Metall. Mater. Trans. A-Phys. Metall. Mater. Sci., 48A, 2971-2978 (2017)
  • Mechanism of formation of fibrous eutectic Si and thermal conductivity of SiCp/Al-20Si composites solidified under high pressure
    Ma P., Z.J. Wei, Y.D. Jia, Z.S. Yu, K.G. Prashanth, S.L. Yang, C.G. Li, L.X. Huang, J. Eckert
    J. Alloy. Compd., 709, 329-336 (2017)
  • Crack driving force in twisted plywood structures
    Fischer F.D., O. Kolednik, J. Predan, H. Razi, P. Fratzl
    Acta Biomater., 55, 349-359 (2017)
  • Film thickness dependent microstructural changes of thick copper metallizations upon thermal fatigue
    Bigl S., C.O.W. Trost, S. Wurster, M.J. Cordill, D. Kiener
    J. Mater. Res., 32, 2022-2034 (2017)
  • The bi-layered precipitate phase zeta in the Al-Ag alloy system
    Zhang Z., L. Bourgeois, J.M. Rosalie, N.V. Medhekar
    Acta Mater., 132, 525-537 (2017)
  • Simultaneous enhancement of strength and fatigue crack growth behavior of nanocrystalline steels by annealing
    Leitner T., S. Pillmeier, K.S. Kormout, R. Pippan, A. Hohenwarter
    Scr. Mater., 139, 39-43 (2017)
  • Is the energy density a reliable parameter for materials synthesis by selective laser melting?
    Prashanth K.G., S. Scudino, T. Maity, J. Das, J. Eckert
    MATERIALS RESEARCH LETTERS, 5, 386-390 (2017)
  • Investigation of structure and thermal properties in composite materials based on metallic glasses with small addition of polytetrafluoroethylene
    Zadorozhnyy V.Y., M.V. Gorshenkov, M.N. Churyukanova, M.Y. Zadorozhnyy, A.A. Stepashkin, D.O. Moskovskikh, S.V. Ketov, L.K. Zinnurova, A. Sharma, D.V. Louzguine-Luzgin, S.D. Kaloshkin
    Journal of Alloys and Compounds, 707, 264-268 (2017)
  • Nucleation and thermal stability of an icosahedral nanophase during the early crystallization stage in Zr-Co-Cu-Al metallic glasses
    Wang Z., S.V. Ketov, C.L. Chen, Y. Shen, Y. Ikuhara, A.A. Tsarkov, D.V. Louzguine-Luzgin, J.H. Perepezko
    Acta Materialia, 132, 298-306 (2017)
  • Thickness dependence of the electro-mechanical response of sputter deposited Mo thin films on polyimide: Insights from in situ synchrotron diffraction tensile tests
    Joerg T., M.J. Cordill, R. Franza, C. Kirchlechner, D.M. Toebbens, J. Winkler, C. Mitterer
    Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 697, 17-23 (2017)
  • Effect of Si content on the microstructure and properties of Al-Si alloys fabricated using hot extrusion
    Ma P., Y. Jia, P. Konda Gokuidoss, Z. Yu, C. Li, J. Zhao, S. Yang, L. Huang
    Journal of Materials Research, 32, 2210-2217 (2017)
  • Correlative characterization on microstructure evolution of Ni-based K403 alloy during thermal exposure
    Liu J., J. Li, F.S. Hage, P. Ghosh, J. Li, W. Wang, Z. Chen, T. Wang, W. Tang, Q. Ramasse, P. Schumacher
    Acta Mater., 131, 169-186 (2017)
  • Dynamic nanoindentation testing: is there an influence on a material’s hardness?
    Leitner A., V. Maier-Kiener, D. Kiener
    Materials Research Letters, 5, 486-493 (2017)
  • Single-shot full strain tensor determination with microbeam X-ray Laue diffraction and a two- dimensional energy-dispersive detector
    Abboud A., C. Kirchlechner, J. Keckes, T. Conka Nurdan, S. Send, J.S. Micha, O. Ulrich, R. Hartmann, L. Strüderf, U. Pietsch
    Journal of Applied Crystallography, 50, 901-908 (2017)
  • Probing the dynamics of complexed local anesthetics via neutron scattering spectroscopy and DFT calculations
    Martins M.L., J. Eckert, H. Jacobsen, E.C. dos Santos, R. Ignazzi, D.R. de Araujo, M.C. Bellissent-Funel, F. Natali, M.M. Koza, A. Matic, E. de Paula, H.N. Bordallo
    International Journal of Pharmaceutics, 524, 397-406 (2017)
  • Structural, elastic and electronic properties of CoZr in B2 and B33 structures under high pressure
    Lu W.F., C.J. Li, B. Sarac, D. Sopu, J.H. Yi, J. Tan, M. Stoica, J. Eckert
    J. Alloy. Compd., 705, 445-455 (2017)
  • Dichlorosilane-derived nano-silicon inside hollow carbon spheres as a high-performance anode for Li-ion batteries
    Jaumann T., M. Gerwig, J. Balach, S. Oswald, E. Brendler, R. Hauser, B. Kieback, J. Eckert, L. Giebeler, E. Kroke
    J. Mater. Chem. A, 5, 9262-9271 (2017)
  • Mechanochemical synthesis of nanostructured metal nitrides, carbonitrides and carbon nitride: a combined theoretical and experimental study
    Rounaghi S.A., D.E.P. Vanpoucke, H. Eshghi, S. Scudino, E. Esmaeili, S. Oswald, J. Eckert
    Phys. Chem. Chem. Phys., 19, 12414-12424 (2017)
  • Revealing the Microstructural evolution in Cu-Cr nanocrystalline alloys during high pressure torsion
    Guo J., J.M. Rosalie, R. Pippan, Z. Zhang
    Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 695, 350-359 (2017)
  • Temperature dependent structural evolution in nickel/carbon nanotube composites processed by high-pressure torsion
    Katzensteiner A., K. Aristizabal, S. Suarez, R. Pippan, A. Bachmaier
    IOP Conference Series: Materials Science and Engineering, 194, ARTN 012019 (2017)
  • Microstructure and texture evolution during severe plastic deformation of CrMnFeCoNi high-entropy alloy
    Skrotzki W., A. Pukenas, B. Joni, E. Odor, T. Ungar, A. Hohenwarter, R. Pippan, E.P. George
    IOP Conf. Series: Materials Science and Engineering, 194, ARTN 012028 (2017)
  • Selective laser melting of ultra-high-strength TRIP steel: processing, microstructure, and properties
    Sander J., J. Hufenbach, M. Bleckmann, L. Giebeler, H. Wendrock, S. Oswald, T. Gemming, J. Eckert, U. Kuehn
    J. Mater. Sci., 52, 4944-4956 (2017)
  • On the phase evolution and dissolution process in Cu-Cr alloys deformed by high pressure torsion
    Guo J., J. Rosalie, R. Pippan, Z. Zhang
    Scr. Mater., 133, 41-44 (2017)
  • Designing a novel functional-structural NiTi/hydroxyapatite composite with enhanced mechanical properties and high bioactivity
    Zhang L., Z.Y. He, J. Tan, Y.Q. Zhang, M. Stoica, M. Calin, K.G. Prashanth, M.J. Cordill, Y.H. Jiang, R. Zhou, J. Eckert
    Intermetallics, 84, 35-41 (2017)
  • Monotonic and cyclic mechanical reliability of metallization lines on polymer substrates
    Glushko O., A. Klug, E.J.W. List-Kratochvil, M.J. Cordill
    J. Mater. Res., 32, 1760-1769 (2017)
  • A versatile atomic force microscope integrated with a scanning electron microscope
    Kreith J., T. Strunz, E.J. Fantner, G.E. Fantner, M.J. Cordill
    Rev. Sci. Instrum., 88, ARTN 053704 (2017)
  • Optimizing disk registration algorithms for nanobeam electron diffraction strain mapping
    Pekin T.C., C. Gammer, J. Ciston, A.M. Minor, C. Ophus
    Ultramicroscopy, 176, 170-176 (2017)
  • Electrochemical and biocompatibility examinations of high-pressure torsion processed titanium and Ti–13Nb–13Zr alloy
    Dimić I., I. Cvijović-Alagić, A. Hohenwarter, R. Pippan, V. Kojić, J. Bajat, M. Rakin
    Journal of Biomedical Materials Research, Part B Applied Biomaterials, 1-11 (2017)
  • Explicit relationship between electrical and topological degradation of polymer-supported metal films subjected to mechanical loading
    Glushko O., P. Kraker, M.J. Cordill
    Appl. Phys. Lett., 110, ARTN 191904 (2017)
  • Direct Observation of Current-Induced Motion of a 3D Vortex Domain Wall in Cylindrical Nanowires
    Ivanov Y.P., A. Chuvilin, S. Lopatin, H. Mohammed, J. Kosel
    ACS Applied Materials and Interfaces, 9, 16741–16744 (2017)
  • The use of femtosecond laser ablation as a novel tool for rapid micro-mechanical sample preparation
    Pfeifenberger M.J., M. Mangang, S. Wurster, J. Reiser, A. Hohenwarter, W. Pfleging, D. Kiener, R. Pippan
    MATERIALS & DESIGN, 121, 109-118 (2017)
  • Deformation-Induced Supersaturation in Immiscible Material Systems during High-Pressure Torsion
    Kormout K.S., R. Pippan, A. Bachmaier
    Advanced Engineering Materials, 19, ARTN 1600675, 1-19 (2017)
  • Thin film adhesion of flexible electronics influenced by interlayers
    Kleinbichler A., M. Bartosik, B. Völker, M.J. Cordill
    Advanced Engineering Materials, 19, 1-7 (2017)
  • Fracture of severely plastically deformed Ta and Nb
    Hohenwarter A., S. Wurster, B. Voelker
    Int. J. Refract. Met. Hard Mat., 64, 143-150 (2017)
  • Fatigue crack closure: a review of the physical phenomena
    Pippan R., A. Hohenwarter
    Fatigue Fract. Eng. Mater. Struct., 40, 471-495 (2017)
  • Micro-patterning by thermoplastic forming of Ni-free Ti-based bulk metallic glasses
    Bera S., B. Sarac, S. Balakin, P. Ramasamy, M. Stoica, M. Calin, J. Eckert
    MATERIALS & DESIGN, 120, 204-211 (2017)
  • High cycle fatigue testing of thermosonic ball bonds
    Lassnig A., M. Lederer, G. Khatibi, R. Pelzer, W. Robl, M. Nelhiebel
    Microelectron. Reliab., 70, 91-98 (2017)
  • Microstructural Effects on the Toughness of a High Co-Ni Steel
    Gruber M., G. Ressel, S. Ploberger, S. Marsoner, O. Kolednik, R. Ebner
    Adv. Eng. Mater., 19, UNSP 1600633 (2017)
  • Extraction of Flow Behavior and Hall-Petch Parameters Using a Nanoindentation Multiple Sharp Tip Approach
    Leitner A., V. Maier-Kiener, D. Kiener
    Adv. Eng. Mater., 19, UNSP 1600669 (2017)
  • Phase Decomposition of a Single-Phase AlTiVNb High-Entropy Alloy after Severe Plastic Deformation and Annealing
    Schuh B., B. Voelker, V. Maier-Kiener, J. Todt, J. Li, A. Hohenwarter
    Adv. Eng. Mater., 19, UNSP 1600674 (2017)
  • Complementary High Spatial Resolution Methods in Materials Science and Engineering
    Paris O., D. Lang, J. Li, P. Schumacher, M. Deluca, R. Daniel, M. Tkadletz, N. Schalk, C. Mitterer, J. Todt, J. Keckes, Z. Zhang, G. Fritz-Popovski, C. Ganser, C. Teichert, H. Clemens
    Adv. Eng. Mater., 19, UNSP 1600671 (2017)
  • Mechanical behavior of selective laser melted 316L stainless steel
    Suryawanshi J., K.G. Prashanth, U. Ramamurty
    Materials Science & Engineering A, 696, 113-121 (2017)
  • Magnon Mode Selective Spin Transport in Compensated Ferrimagnets
    Cramer J., E.-J. Guo, S. Geprägs, A. Kehlberger, Y.P. Ivanov, K. Ganzhorn, F. Della Coletta, M. Althammer, H. Huebl, R. Gross, J. Kosel, M. Kläui, S.T.B. Goennenwein
    Nano Letters, 17, 3334-3340 (2017)
  • Electro-mechanical performance of thin gold films on polyimide
    Putz B., O. Glushko, V.M. Marx, C. Kirchlechner, D. Toebbens, M.J. Cordill
    MRS ADVANCES, 1, 773-778 (2017)
  • Superlattice-induced oscillations of interplanar distances and strain effects in the CrN/AlN system
    Zhang Z., X. Gu, D. Holec, M. Bartosik, P.H. Mayrhofer, H.P. Duan
    Phys. Rev. B, 95, ARTN 155305 (2017)
  • Peculiarity of self-assembled cubic nanolamellae in the TiN/AlN system: Epitaxial self-stabilization by element deficiency/excess
    Zalezak J., D. Holec, I. Matko, Petrenec M., B. Sartory, N. Koutna, R. Daniel, R. Pitonak, J. Keckes
    Acta Materialia, 131, 391-399 (2017)
  • Hierarchical surface patterning of Ni- and Be-free Ti- and Zr-based bulk metallic glasses by thermoplastic net-shaping
    Sarac B., S. Bera, S. Balakin, M. Stoica, M. Calin, J. Eckert
    Materials Science and Engineering C, 73, 398-405 (2017)
  • Transient nucleation and microstructural design in flash-annealed bulk metallic glasses
    Kosiba K., S. Scudino, R. Kobold, U. Kuehn, A.L. Greer, J. Eckert, S. Pauly
    Acta Mater., 127, 416-425 (2017)
  • Prediction of effective mode II fatigue crack growth threshold for metallic materials
    Vojtek T., R. Pippan, A. Hohenwarter, J. Pokluda
    Eng. Fract. Mech., 174, 117-126 (2017)
  • Influence of the Ag concentration on the medium-range order in a CuZrAlAg bulk metallic glass
    Gammer C., B. Escher, C. Ebner, A.M. Minor, H.P. Karnthaler, J. Eckert, S. Pauly, C. Rentenberger
    Sci Rep, 7, ARTN 44903 (2017)
  • The driving force governing room temperature grain coarsening in thin gold films
    Glushko O., M.J. Cordill
    Scripta Materialia, 130, 42-45 (2017)
  • Hysteretic behavior of soft magnetic elastomer composites
    Krautz M., D. Werner, M. Schrödner, A. Funk, A. Jantz, J. Popp, J. Eckert, Waske. A.
    Journal of Magnetism and Magnetic Materials, 426, 60-63 (2017)
  • Extracting flow curves from nano-sized metal layers in thin film systems
    Kozic D., V. Maier-Kiener, R. Konetschnik, H.P. Gänser, T. Antretter, R. Brunner, D. Kiener
    Schripta Materialia, 130, 143-147 (2017)
  • Thermal stability and latent heat of Nb-rich martensitic Ti-Nb alloys
    Boenisch M., A. Panigrahi, M. Calin, T. Waitz, M. Zehetbauer, W. Skrotzki, J. Eckert
    J. Alloy. Compd., 697, 300-309 (2017)
  • Microstructure and thermal expansion behavior of Al-50Si synthesized by selective laser melting
    Jia Y.D., P. Ma, K.G. Prashanth, G. Wang, J. Yi, S. Scudino, F.Y. Cao, J.F. Sun, J. Eckert
    J. Alloy. Compd., 699, 548-553 (2017)
  • Fatigue crack growth anisotropy in ultrafine-grained iron
    Leitner T., A. Hohenwarter, W. Ochensberger, R. Pippan
    Acta Mater., 126, 154-165 (2017)
  • Defining the tensile properties of Al-12Si parts produced by selective laser melting
    Prashanth K.G., S. Scudino, J. Eckert
    Acta Mater., 126, 25-35 (2017)
  • Impact of d-band filling on the dislocation properties of bcc transition metals: The case of tantalum-tungsten alloys investigated by density- functional theory
    Li H., C. Draxl, S. Wurster, R. Pippan, L. Romaner
    PHYSICAL REVIEW B, 95, ARTN 094114 (2017)
  • Nanoindentation and wear properties of Ti and Ti-TiB composite materials produced by selective laser melting
    Attar H., S. Ehtemam-Haghighi, D. Kent, I.V. Okulov, H. Wendrock, M. Boenisch, A.S. Volegov, M. Calin, J. Eckert, M.S. Dargusch
    Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 688, 20-26 (2017)
  • Selective interface toughness measurements of layered thin films
    Konetschnik R., R. Daniel, R. Brunner, D. Kiener
    AIP Advances, 7, ARTN 035307 (2017)
  • Ab-initio and experimental study of phase stability of Ti-Nb alloys
    Gutiérrez Moreno J.J., M. Bönisch, N.T. Panagiotopoulos, M. Calin, D.G. Papageorgiou, a. Gebert, J. Eckert, G.G. Evangelakis, C.E. Lekka
    Journal of Alloys and Compounds, 696, 481-489 (2017)
  • Rapid fabrication of function-structure-integrated NiTi alloys: Towards a combination of excellent superelasticity and favorable bioactivity
    Zhang L., Z.Y. He, J. Tan, Y.Q. Zhang, M. Stoica, K.G. Prashanth, M.J. Cordill, Y.H. Jiang, R. Zhou, J. Eckert
    Intermetallics, 82, 1-13 (2017)
  • Structure of glassy Cu47.5Zr47.5Ag5 investigated with neutron diffraction with isotopic substitution, X-ray diffraction, EXAFS and reverse Monte Carlo simulation
    Jovari P., I. Kaban, B. Escher, K.K. Song, J. Eckert, B. Beuneu, M.A. Webb, N. Chen
    J. Non-Cryst. Solids, 459, 99-102 (2017)
  • Effect of annealing on the size dependent deformation behavior of thin cobalt films on flexible substrates
    Marx V.M., M.J. Cordill, D.M. Toebbens, C. Kirchlechner, G. Dehm
    Thin Solid Films, 624, 34-40 (2017)
  • Deformation mechanisms during severe plastic deformation of a Cu-Ag composite
    Kormout K.S., P. Ghosh, V. Maier-Kiener, R. Pippan
    J. Alloy. Compd., 695, 2285-2294 (2017)
  • Additive Manufacturing: Reproducibility of Metallic Parts
    Prashanth K.G., S. Scudino, R.P. Chatterjee, O.O. Salman, J. Eckert
    TECHNOLOGIES, 5, ARTN 8 (2017)
  • Biocompatible 3D printed magnetic micro needles
    Kavaldzhiev M., J.E. Perez, I. Ivanov, A. Bertoncini, C. Liberale, J. Kosel
    Biomedical Physics & Engineering Express, 3, ARTN 025005 (2017)
  • On room-temperature quasi-elastic mechanical behaviour of bulk metallic glasses
    Louzguine-Luzgin D.V., V.Y. Zadorozhnyy, S.V. Ketov, Z. Wang, A.A. Tsarkov, A.L. Greer
    Acta Materialia, 129, 343-351 (2017)
  • In Situ X-Ray Synchrotron Profile Analysis During High Pressure Torsion of Ti
    Schafler E., M.B. Kerber, F. Spieckermann, T. Fischer, R. Schuster, C. von Baeckmann
    The Minerals, Metals & Materials Society 2017, Magnesium Technology 2017, 645-651 (2017)
  • Strength distribution and fracture analyses of LiNbO3and LiTaO3single crystals under biaxial loading
    Gruber M., I. Kraleva, P. Supancic, J. Bielen, D. Kiener, R. Bermejo
    Journal of the European Ceramic Society, 37, 4397-4406 (2017)
  • Structural instabilities during cyclic loading of ultrafine-grained copper studied with micro bending experiments
    Kapp M.W., T. Kremmer, C. Motz, B. Yang, R. Pippan
    Acta Materialia, 125, 351-358 (2017)
  • A novel setup for wafer curvature measurement at very high heating rates
    Islam T., J. Zechner, M. Bernardoni, M. Nelhiebel, R. Pippan
    Rev. Sci. Instrum., 88, ARTN 024709 (2017)
  • Structural anisotropy in equal-channel angular extruded nickel revealed by dilatometric study of excess volume
    Kotzurek J.A., W. Sprengel, M. Krystian, S. Simic, P. Poelt, A. Hohenwarter, R. Pippan, R. Wuerschum
    Int. J. Mater. Res., 108, 81-88 (2017)
  • Local melting to design strong and plastically deformable bulk metallic glass composites
    Qin Y.S., X.L. Han, K.K. Song, Y.H. Tian, C.X. Peng, L. Wang, B.A. Sun, G. Wang, I. Kaban, J. Eckert
    Sci Rep, 7, ARTN 42518 (2017)
  • Nanoindentation testing as a powerful screening tool for assessing phase stability of nanocrystalline high-entropy alloys
    Maier-Kiener V., B. Schuh, E.P. George, H. Clemens, A. Hohenwarter
    MATERIALS & DESIGN, 115, 479-485 (2017)
  • Transmission electron microscopical study of teenage crown dentin on the nanometer scale
    Panfilov P., A. Kabanova, J. Guo, Z. Zhang
    Mater. Sci. Eng. C-Mater. Biol. Appl., 71, 994-998 (2017)
  • Effect of growth conditions on interface stability and thermophysical properties of sputtered Cu films on Si with and without WTi barrier layers
    Souli I., V.L. Terziyska, J. Keckes, W. Robl, J. Zechner, C. Mitterer
    Journal of Vacuum Science and Technology B: Nanotechnology and Microelectronics, 35, ARTN 022201 (2017)
  • Co/Au multisegmented nanowires: a 3D array of magnetostatically coupled nanopillars
    Bran C., Y.P. Ivanov, J. Kosel, O. Chubykalo-Fesenko, M. Vazquez
    Nanotechnology, 28, ARTN 095709 (7pp) (2017)
  • Microtexture Analysis of Restoration Mechanisms during High Pressure Torsion of Pure Nickel
    Ghosh P., O. Renk, R. Pippan
    Materials Science & Engineering A, 684, 101-109 (2017)
  • Self-Terminating Confinement Approach for Large-Area Uniform Monolayer Graphene Directly over Si/SiOX by Chemical Vapor Deposition
    Pang J., R.G. Mendes, P.S. Wrobel, M.D. Wlodarski, H.Q. Ta, L. Zhao, L. Giebeler, B. Trzebicka, T. Gemming, L. Fu, Z. Liu, J. Eckert, A. Bachmatiuk, M.H. Ruemmeli
    ACS Nano, 11, 1946-1956 (2017)
  • The influence of microstructure on the cyclic deformation and damage of copper and an oxide dispersion strengthened steel studied via in-situ micro-beam bending
    Howard C., R. Fritz, M. Alfreider, D. Kiener, P. Hosemann
    Materials Science and Engineering A, 687, 313-322 (2017)
  • Effect of thermomechanical processing on the mechanical biofunctionality of a low modulus Ti-40Nb alloy
    Helth A., S. Pilz, T. Kirsten, L. Giebeler, J. Freudenberger, M. Calin, J. Eckert, A. Gebert
    J. Mech. Behav. Biomed. Mater., 65, 137-150 (2017)
  • Composition optimization of low modulus and high-strength TiNb-based alloys for biomedical applications
    Okulov I.V., A.S. Volegov, H. Attar, M. Boenisch, S. Ehternam-Haghighi, M. Calin, J. Eckert
    J. Mech. Behav. Biomed. Mater., 65, 866-871 (2017)
  • Influence of testing orientation on mechanical properties of Ti45Nb deformed by high pressure torsion
    Voelker B., N. Jaeger, M. Calin, M. Zehetbauer, J. Eckert, A. Hohenwarter
    MATERIALS & DESIGN, 114, 40-46 (2017)
  • Nanostructured coatings for tooling applications
    Köpf A., J. Keckes, J. Todt, R. Pitonak, R. Weissenbacher
    International Journal of Refractory Metals and Hard Materials, 62, 219-224 (2017)
  • Micro-to-nano-scale deformation mechanism of a Ti-based dendritic-ultrafine eutectic alloy exhibiting large tensile ductility
    Okulov I.V., M. Boenisch, A.S. Volegov, H.S. Shahabi, H. Wendrock, T. Gemming, J. Eckert
    Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 682, 673-678 (2017)
  • Introduction
    Messing G.L., J. Eckert, L.S. Schadler
    Journal of Materials Research, 32, 1-1 (2017)
  • Deformation mechanisms to ameliorate the mechanical properties of novel TRIP/TWIP Co-Cr-Mo-(Cu) ultrafine eutectic alloys
    Kim J.T., S.H. Hong, H.J. Park, Y.S. Kim, J.Y. Suh, J.K. Lee, J.M. Park, T. Maity, J. Eckert, K.B. Kim
    Sci Rep, 7, ARTN 39959)
  • Accelerated thermo-mechanical fatigue of copper metallizations studied by pulsed laser heating
    Wurster S., S. Bigl, M.J. Cordill, D. Kiener
    Microelectronic Engineering, 167, 110-118 (2017)
  • Buckle induced delamination techniques to measure the adhesion of metal dielectric interfaces
    Kleinbichler A., J. Zechner, M.J. Cordill
    Microelectron. Eng., 167, 63-68 (2017)
  • Influence of extreme thermal cycling on metal-polymer interfaces
    Putz B., B. Voelker, C. Semprimoschnig, M.J. Cordill
    Microelectron. Eng., 167, 17-22 (2017)
  • Formation of nanostructured metallic glass thin films upon sputtering
    Ketov S.V., R. Joksimovic, G. Xie, A. Trifonov, K. Kurihara, D.V. Louzguine-Luzgin
    Heliyon, 3, ARTN 00228 (2017)
  • Intrinsic behaviour of mode II and mode III long fatigue cracks in zirconium and the Ti-6Al-4V alloy
    Vojtek T., J. Pokluda, A. Hohenwarter, R. Pippan
    Solid State Phenomena, 258, 265-268 (2017)
  • Microstructure, mechanical behavior, and wear properties of FeCrMoVC steel prepared by selective laser melting and casting
    Sander J., J. Hufenbach, L. Giebeler, M. Bleckmann, J. Eckert, U. Kuhn
    Scr. Mater., 126, 41-44 (2017)
  • Grain boundary design of thin films: Using tilted brittle interfaces for multiple crack deflection toughening
    Daniel R., M. Meindlhumer, W. Baumegger, J. Zalesak, B. Sartory, M. Burghammer, C. Mitterer, J. Keckes
    Acta Mater., 122, 130-137 (2017)
  • Improving strength and toughness of materials by utilizing spatial variations of the yield stress
    Sistaninia M., O. Kolednik
    Acta Mater., 122, 207-219 (2017)
  • Lifetime vs. rate capability: Understanding the role of FEC and VC in high-energy Li-ion batteries with nano-silicon anodes
    Jaumann T., J. Balach, U. Langklotz, C. Sauchuk, M. Fritsch, A. Michaelis, V. Teltevskij, C. Mikhailova, S. Oswald, M. Klose, G. Stephani, R. Hauser, J. Eckert, L. Giebeler
    Energy Storage Materials, 6, 26-35 (2017)
  • Granulation of Bulk Metallic Glass Forming Alloys as a Feedstock for Thermoplastic Forming and their Compaction into Bulk Samples
    Geissler D., J. Grosse, S. Donath, D. Ehinger, Stoica. M., J. Eckert, U. Kühn
    Materials Science Forum, 879, 589-594 (2017)
  • Correlative microstructure and topography informed nanoindentation of copper films
    Bigl S., T. Schöberl, S. Wurster, M.J. Cordill, D. Kiener
    Surface & Coatings Technology, 404-413 (2016)
  • Thermal shock resistance of magnesia spinel refractories-Investigation with the concept of configurational forces
    Gruber D., M. Sistaninia, C. Fasching, O. Kolednik
    J. Eur. Ceram. Soc., 36, 4301-4308 (2016)
  • Negentropic stabilization of metastable beta-Ti in bulk metallic glass composites
    Zhang L., H.F. Zhang, W.Q. Li, T. Gemming, Z.W. Zhu, H.M. Fu, J. Eckert, S. Pauly
    Scr. Mater., 125, 19-23 (2016)
  • Effect of high pressure solidification on tensile properties and strengthening mechanisms of Al-20Si
    Ma P., Z.J. Wei, Y.D. Jia, C.M. Zou, S. Scudino, K.G. Prashanth, Z.S. Yu, S.L. Yang, C.G. Li, J. Eckert
    J. Alloy. Compd., 688, 88-93 (2016)
  • Strain-induced phase transformation of a thin Co film on flexible substrates
    Marx V.M., C. Kirchlechner, B. Breitbach, M.J. Cordill, D.M. Toebbens, T. Waitz, G. Dehm
    Acta Mater., 121, 227-233 (2016)
  • Advanced 3D failure characterization in multi-layered PCBs
    Gruenwald E., R. Hammer, J. Rosc, G.A. Maier, M. Baernthaler, M.J. Cordill, S. Brand, R. Nuster, T. Krivec, R. Brunner
    NDT E Int., 84, 99-107 (2016)
  • Ab initio search for cohesion-enhancing impurity elements at grain boundaries in molybdenum and tungsten
    Scheiber D., R. Pippan, P. Puschnig, L. Romaner
    Model. Simul. Mater. Sci. Eng., 24, ARTN 085009 (2016)
  • Compression behavior of inter-particle regions in high-strength Al84Ni7Gd6Co3 alloy
    Wang Z., R.T. Qu, K.G. Prashanth, J. Eckert, S. Scudino
    Mater. Lett., 185, 25-28 (2016)
  • Substitution effect on glass formation of NixCo60-xNb40 alloys
    Ye S., S. Zhang, J. Eckert, P. Yu
    Mater. Lett., 185, 541-544 (2016)
  • Effect of Alloying Elements in Melt Spun Mg-alloys for Hydrogen Storage
    Rozenberg S., F. Saporiti, J. Lang, F. Audebert, P. Botta, M. Stoica, J. Huot, J. Eckert
    Mater. Res.-Ibero-am. J. Mater., 19, 20-26 (2016)
  • Tensile Properties of Al-12Si Fabricated via Selective Laser Melting (SLM) at Different Temperatures
    Prashanth K.G., S. Scudino, J. Eckert
    Technologies, 38, 1-9 (2016)
  • Combinatorial refinement of thin-film microstructure, properties and process conditions: iterative nanoscale search for self-assembled TiAlN nanolamellae
    Zalesak J., J. Todt, R. Pitonak, A. Köpf, R. Weißenbacher, B. Sartory, M. Burghammer, R. Daniel, J. Keckes
    JOURNAL OF APPLIED CRYSTALLOGRAPHY, 6 (2016)
  • Improved fracture behavior and microstructural characterization of thin tungsten foils
    Nikolic V., S. Wurster, D. Firneis, R. Pippan
    Nuclear Materials and Energy, 9, 181-188 (2016)
  • High-resolution transmission electron microscopy investigation of diffusion in metallic glass multilayer films
    Ketov S.V., Y.P. Ivanov, D. Sopu, D.V. Louzguine-Luzgin, C. Suryanarayana, A.O. Rodin, T. Schöberl, A.L. Greer, J. Eckert
    Materials Today AdvancesElsevierScience Direct, 1, 100004 (2016)
  • Effect of Particle Size on Microstructure and Mechanical Properties of Al-Based Composite Reinforced with 10 Vol.% Mechanically Alloyed Mg-7.4%Al Particles
    Chaubey A.K., K.G. Prashanth, Z. Wang, s. Scudino, N.K. Mukhopadhyay, J. Eckert
    Technologies, 4, 1-8 (2016)
  • Integrated experimental and computational approach for residual stress investigation near through-silicon vias
    Deluca M., R. Hammer, J. Keckes, J. Kraft, F. Schrank, J. Todt, O. Robach, J.S. Micha, S. Defregger
    JOURNAL OF APPLIED PHYSICS, 120, 1-9 (2016)
  • Ab-initio search for cohesion-enhancing solute elements at grain boundaries in molybdenum and tungsten
    Scheiber D., R. Pippan, P. Puschnig, A. Ruban, L. Romaner
    Int. J. Refract. Met. Hard Mat., 60, 75-81 (2016)
  • Interfacial segregation induced by severe plastic deformation in a Mg-Zn-Y alloy
    Basha D.A., R. Sahara, H. Somekawa, J.M. Rosalie, A. Singh, K. Tsuchiya
    Scr. Mater., 124, 169-173 (2016)
  • Advanced tungsten materials for plasma-facing components of DEMO and fusion power plants
    Neu R., J. Riesch, J.W. Coenen, J. Brinkmann, A. Calvo, S. Elgeti, C. Garcia-Rosales, H. Greuner, T. Hoeschen, G. Holzner, F. Klein, F. Koch, C. Linsmeier, A. Litnovsky, T. Wegener, S. Wurster, J.-H. You
    Fusion Eng. Des., 109, 1046-1052 (2016)
  • Crossover between superconductivity and magnetism in SrRuO3 mesocrystal embedded YBa2Cu3O7-x heterostructures
    Suresh V., J.-C. Lin, H.-J. Liu, Z. Zhang, P.-C. Chiang, Y.-C. Hsun, Y.-C. Chen, J.-Y. Lin, Y.-H. Chu
    Nanoscale, 8, 18454-18460 (2016)
  • Microstructure and thermal conductivity of hypereutectic Al-high Si produced by casting and spray deposition
    Jia Y., F. Cao, P. Ma, S. Scudino, J. Eckert, J. Sun, G. Wang
    J. Mater. Res., 31, 2948-2955 (2016)
  • High pressure die casting of Fe-based metallic glass
    Ramasamy P., A. Szabo, S. Borzel, J. Eckert, M. Stoica, A. Bardos
    Sci Rep, 6, ARTN 35258 (2016)
  • Compositional depth profiling of diamond-like carbon layers by glow discharge optical emission spectroscopy
    Schubert C., V. Hoffmann, A. Kuemmel, J. Sinn, M. Haertel, A. Reuther, M. Thomalla, T. Gemming, J. Eckert, C. Leyens
    J. Anal. At. Spectrom., 31, 2207-2212 (2016)
  • Mechanical and Corrosion Behavior of New Generation Ti-45Nb Porous Alloys Implant Dev
    Prashanth K.G., K. Zhuravleva, I. Okulov, M. Calin, J. Eckert, A. Gebert
    Technologies, 4, 1-12 (2016)
  • Mechanical and Corrosion Behavior of New Generation Ti-45Nb Porous Alloys Implant Dev
    Prashanth K.G., K. Zhuravleva, I. Okulov, M. Calin, J. Eckert, A. Gebert
    Technologies, 4, 1-12)
  • Correlation between structural heterogeneity and plastic deformation for phase separating FeCu metallic glasses
    Peng C.X., K.K. Song, L. Wang, D. Sopu, S. Pauly, J. Eckert
    Sci Rep, 6, ARTN 34340 (2016)
  • Strong and Stable Nanocomposites Prepared by High-Pressure Torsion of Cu-Coated Fe Powders
    Mueller T., A. Bachmaier, E. Neubauer, M. Kitzmantel, R. Pippan
    METALS, 6, ARTN 228 (2016)
  • Mechanochemical route to the synthesis of nanostructured Aluminium nitride
    Rounaghi S.A., H. Eshghi, S. Scudino, A. Vyalikh, D.E.P. Vanpoucke, W. Gruner, S. Oswald, A.R.K. Rashid, M.S. Khoshkhoo, U. Scheler, J. Eckert
    Sci Rep, 6, ARTN 33375 (2016)
  • Hierarchically nanostructured hollow carbon nanospheres for ultra-fast and long-life energy storage
    Klose M., R. Reinhold, K. Pinkert, M. Uhlemann, F. Wolke, J. Balach, T. Jaumann, U. Stoeck, J. Eckert, L. Giebeler
    Carbon, 106, 306-313 (2016)
  • Influence of Ag and Co additions on glass-forming ability, thermal and mechanical properties of Cu-Zr-Al bulk metallic glasses
    Escher B., U. Kuehn, J. Eckert, C. Rentenberger, S. Pauly
    Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 673, 90-98 (2016)
  • Effect of cerium addition on microstructure and mechanical properties of high-strength Fe85Cr4Mo8V2C1 cast steel
    Hufenbach J., A. Helth, M.-H. Lee, H. Wendrock, L. Giebeler, C.-Y. Choe, K.-H. Kim, U. Kuehn, T.-S. Kim, J. Eckert
    Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 674, 366-374 (2016)
  • Formation and phase evolution of liquid phase-separated metallic glasses with double glass transition, crystallization and melting
    Qin Y.S., Y. Shi, X.L. Han, K.K. Song, C.D. Cao, X.L. Li, S.H. Wang, J. He, L. Wang, I. Kaban, J. Eckert
    MATERIALS TODAY COMMUNICATIONS, 8, 64-71 (2016)
  • Ultra-strong and damage tolerant metallic bulk materials: A lesson from nanostructured pearlitic steel wires
    Hohenwarter A., B. Voelker, M.W. Kapp, Y. Li, S. Goto, D. Raabe, R. Pippan
    Sci Rep, 6, ARTN 33228 (2016)
  • Interface dominated mechanical properties of ultra-fine grained and nanoporous Au at elevated temperatures
    Leitner A., V. Maier-Kiener, J. Joeng, M.D. Abad, P. Hosemann, S.H. Oh, D. Kiener
    Acta Materialia, 121, 104-116 (2016)
  • Alloying Behavior of Self-Assembled Noble Metal Nanoparticles
    Kuehn L., A.K. Hermann, B. Rutkowski, M. Oezaslan, M. Nachtegaal, M. Klose, L. Giebeler, N. Gaponik, J. Eckert, T.J. Schmidt, A. Czyrska-Filemonowicz, A. Eychmueller
    Chem.-Eur. J., 22, 13446-+ (2016)
  • Microstructure and mechanical properties of the near-beta titanium alloy Ti-5553 processed by selective laser melting
    Schwab H., F. Palm, U. Kuehn, J. Eckert
    MATERIALS & DESIGN, 105, 75-80 (2016)
  • Influence of ejection temperature on structure and glass transition behavior for Zr-based rapidly quenched disordered alloys
    Wang X.H., A. Inoue, F.L. Kong, S.L. Zhu, M. Stoica, I. Kaban, C.T. Chang, E. Shalaan, F. Al-Marzouki, J. Eckert
    Acta Mater., 116, 370-381 (2016)
  • The effect of size on the strength of FCC metals at elevated temperatures: annealed copper
    Wheeler J.M., C. Kirchlechner, J. Micha, J. Michler, D. Kiener
    Philosophical Magazine, 3379-3395 (2016)
  • Effect of Cu and Gd on Structural and Magnetic Properties of Fe-Co-B-Si-Nb Metallic Glasses
    Ramasamy P., M. Stoica, M. Calin, Eckert J.
    Solid State Phenomena, 254, 60-64)
  • Local and transient nanoscale strain mapping during in situ deformation
    Gammer C., J. Kacher, C. Czarnik, O.L. Warren, J. Ciston, A.M. Minor
    Appl. Phys. Lett., 109, ARTN 081906 (2016)
  • Ideal shear banding in metallic glass
    Wang J.G., H.B. Ke, Y. Pan, K.C. Chan, W.H. Wang, J. Eckert
    Philos. Mag., 96, 3159-3176 (2016)
  • Fracture toughness enhancement of brittle nanostructured materials by spatial heterogeneity: A micromechanical proof for CrN/Cr and TiN/SiOx multilayers
    Daniel R., M. Meindlhumer, J. Zalesak, B. Sartory, A. Zeilinger, C. Mitterer, J. Keckes
    MATERIALS & DESIGN, 104, 227-234 (2016)
  • The effect of single overloads in tension and compression on the fatigue crack propagation behaviour of short cracks
    Zhou X., H.P. Gaenser, R. Pippan
    Int. J. Fatigue, 89, 77-86 (2016)
  • Progress in understanding of intrinsic resistance to shear-mode fatigue crack growth in metallic materials
    Vojtek T., J. Pokluda, A. Hohenwarter, R. Pippan
    Int. J. Fatigue, 89, 36-42 (2016)
  • Ductilisation of tungsten (W) through cold-rolling: R-curve behaviour
    Reiser J., S. Wurster, J. Hoffmann, S. Bonk, C. Bonnekoh, D. Kiener, R. Pippan, A. Hoffmann, M. Rieth
    Int. J. Refract. Met. Hard Mat., 58, 22-33 (2016)
  • Simultaneous enhancements of strength and toughness in an Al-12Si alloy synthesized using selective laser melting
    Suryawanshi J., K.G. Prashanth, S. Scudino, J. Eckert, O. Prakash, U. Ramamurty
    Acta Mater., 115, 285-294 (2016)
  • On the process of co-deformation and phase dissolution in a hard-soft immiscible Cu-Co alloy system during high-pressure torsion deformation
    Bachmaier A., J. Schmauch, H. Aboulfadl, A. Verch, C. Motz
    Acta Mater., 115, 333-346 (2016)
  • Synthesis and Mechanical Characterisation of an Ultra-Fine Grained Ti-Mg Composite
    Alfreider M., J. Jeong, R. Esterl, S. Ho Oh, D. Kiener
    Materials, 9, 688 (2016)
  • A comparative study on the isochronal and isothermal crystallization kinetics of Co46.45Fe25.55Ta8B20 soft magnetic metallic glass with high thermal stability
    Taghvaei A.H., J. Eckert
    J. Alloy. Compd., 675, 223-230 (2016)
  • Interplay between sample size and grain size: Single crystalline vs. ultrafine-grained chromium micropillars
    Fritz R., V. Maier-Kiener, D. Lutz, D. Kiener
    Materials Science and Engineering: A, 674, 626-633 (2016)
  • Structural evolution and strength change of a metallic glass at different temperatures
    Tong X., G. Wang, Z.H. Stachurski, J. Bednarcik, N. Mattern, Q.J. Zhai, J. Eckert
    Sci Rep, 6, ARTN 30876 (2016)
  • Advanced characterisation of thermo-mechanical fatigue mechanisms of different copper film systems for wafer metallizations
    Bigl S., S. Wurster, M.J. Cordill, D. Kiener
    Thin Solid Films, 612, 153-164 (2016)
  • Interplay of the Open Circuit Potential-Relaxation and the Dissolution Behavior of a Single H-2 Bubble Generated at a Pt Microelectrode
    Karnbach F., X. Yang, G. Mutschke, J. Froehlich, J. Eckert, A. Gebert, K. Tschulik, K. Eckert, M. Uhlemann
    J. Phys. Chem. C, 120, 15137-15146 (2016)
  • Layered-to-Tunnel Structure Transformation and Oxygen Redox Chemistry in LiRhO2 upon Li Extraction and Insertion
    Mikhailova D., O.M. Karakulina, D. Batuk, J. Hadermann, A.M. Abakumov, M. Herklotz, A.A. Tsirlin, S. Oswald, L. Giebeler, M. Schmidt, J. Eckert, M. Knapp, H. Ehrenberg
    Inorg. Chem., 55, 7079-7089 (2016)
  • Brittle-to-Ductile Transition in Metallic Glass Nanowires
    Sopu D., A. Foroughi, M. Stoica, J. Eckert
    Nano Lett., 16, 4467-4471 (2016)
  • High-Performance Small-Amount Fe2O3-Doped (K,Na) NbO3-Based Lead-Free Piezoceramics with Irregular Phase Evolution
    Guo J., F. Xu, X. Shang, Y. Lu, P. Li, T. Zhou, Z. Zhang, Y. He
    J. Am. Ceram. Soc., 99, 2341-2346 (2016)
  • Direct measurement of vacancy relaxation by dilatometry
    Kotzurek J.A., E.M. Steyskal, B. Oberdorfer, A. Hohenwarter, R. Pippan, W. Sprengel, R. Wuerschum
    Appl. Phys. Lett., 109, ARTN 021906 (2016)
  • High-Performance Small-Amount Fe2O3-Doped (K,Na)NbO3-Based Lead-Free Piezoceramics with Irregular Phase Evolution
    Guo J., F. Xu, X. Shang, Y. Lu, P. Li, T. Zhou, Z. Zhang, Y. He
    Journal of the American Ceramic Society, 99, 2341-2346 (2016)
  • Analysis of the thermal and temporal stability of Ta and Ti thin films onto SAW–substrate materials (LiNbO3 and LiTaO3) using AR-XPS
    Vogl U., T. Gemming, J. Eckert, S. Oswald
    Surface and Interface Analysis, 48, 570-574 (2016)
  • Transformation-mediated plasticity in CuZr based metallic glass composites: A quantitative mechanistic understanding.
    Sun B.A., K.K. Song, S. Pauly, P. Gargarella, J. Yi, G. Wang, C.T. Liu, J. Eckert, Y. Yang
    Int. J. Plast., 85, 34-51 (2016)
  • The mechanics of tessellations - bioinspired strategies for fracture resistance
    Fratzl P., O. Kolednik, F.D. Fischer, M.N. Dean
    Chem. Soc. Rev., 45, 252-267 (2016)
  • Electromigration in Gold Films on Flexible Polyimide Substrates as a Self-healing Mechanism
    Putz B., O. Glushko, M.J. Cordill
    MATERIALS RESEARCH LETTERS, 4, 43-47 (2016)
  • Ion milling-induced micrometer-sized heterogeneities and partial crystallization in a TiZrCuFeBe bulk metallic glass
    Zhang L., S. Pauly, Z.W. Zhu, T. Gemming, H.M. Fu, J. Eckert, H.F. Zhang
    Intermetallics, 73, 5-11 (2016)
  • Microstructure study of a severely plastically deformed Mg-Zn-Y alloy by application of low angle annular dark field diffraction contrast imaging
    Basha D.A., J.M. Rosalie, H. Somekawa, T. Miyawaki, A. Singh, K. Tsuchiya
    Sci. Technol. Adv. Mater., 17, 115-127 (2016)
  • Effect of Microstructure on the Electro-Mechanical Behaviour of Cu Films on Polyimide
    Berger J., O. Glushko, V.M. Marx, C. Kirchlechner, M.J. Cordill
    JOM, 68, 1640-1646 (2016)
  • Enhanced polysulphide redox reaction using a RuO2 nanoparticle-decorated mesoporous carbon as functional separator coating for advanced lithium-sulphur batteries
    Balach J., T. Jaumann, S. Muehlenhoff, J. Eckert, L. Giebeler
    Chem. Commun., 52, 8134-8137 (2016)
  • High Area Capacity Lithium-Sulfur Full-cell Battery with Prelitiathed Silicon Nanowire-Carbon Anodes for Long Cycling Stability
    Krause A., S. Doerfler, M. Piwko, F.M. Wisser, T. Jaumann, E. Ahrens, L. Giebeler, H. Althues, S. Schaedlich, J. Grothe, A. Jeffery, M. Grube, J. Brueckner, J. Martin, J. Eckert, S. Kaskel, T. Mikolajick, W.M. Weber
    Sci Rep, 6, ARTN 27982 (2016)
  • Synergistically Enhanced Polysulfide Chemisorption Using a Flexible Hybrid Separator with N and S Dual-Doped Mesoporous Carbon Coating for Advanced Lithium-Sulfur Batteries
    Balach J., H.K. Singh, S. Gomoll, T. Jaumann, M. Klose, S. Oswald, M. Richter, J. Eckert, L. Giebeler
    ACS Appl. Mater. Interfaces, 8, 14586-14595 (2016)
  • Tailoring the Bain strain of martensitic transformations in Ti-Nb alloys by controlling the Nb content
    Boenisch M., T. Waltz, M. Calin, W. Skrotzki, J. Eckert
    Int. J. Plast., 85, 190-202 (2016)
  • The importance of fracture toughness in ultrafine and nanocrystalline bulk materials
    Pippan R., A. Hohenwarter
    MATERIALS RESEARCH LETTERS, 4, 127-136 (2016)
  • Towards the Better: Intrinsic Property Amelioration in Bulk Metallic Glasses
    Sarac B., L. Zhang, K. Kosiba, S. Pauly, M. Stoica, J. Eckert
    Sci Rep, 6, ARTN 27271 (2016)
  • Cross-sectional stress distribution in AlxGa1-xN heterostructure on Si(111) substrate characterized by ion beam layer removal method and precession electron diffraction
    Reisinger M., J. Zalesak, R. Daniel, M. Tomberger, J.K. Weiss, A.D. Darbal, M. Petrenec, J. Zechner, I. Daumiller, W. W. Ecker, B. Sartory, J. Keckes
    , 106, 476-481)
  • Mapping of residual strains around a shear band in bulk metallic glass by nanobeam X-ray diffraction
    Shahabi H.S., S. Scudino, I. Kaban, M. Stoica, B. Escher, S. Menzel, G.B.M. Vaughan, U. Kuehn, J. Eckert
    Acta Mater., 111, 187-193 (2016)
  • Electrochemical deposition of hydroxyapatite on beta-Ti-40Nb
    Schmidt R., V. Hoffmann, A. Helth, P.F. Gostin, M. Calin, J. Eckert, A. Gebert
    Surf. Coat. Technol., 294, 186-193 (2016)
  • Local microstructure evolution at shear bands in metallic glasses with nanoscale phase separation
    He J., I. Kaban, N. Mattern, K. Song, B. Sun, J. Zhao, D.H. Kim, J. Eckert, A.L. Greer
    Sci Rep, 6, ARTN 25832 (2016)
  • Damage tolerance of railway axles - The issue of transferability revisited
    Gaenser H.-P., J. Maierhofer, R. Tichy, I. Zivkovic, R. Pippan, M. Luke, I. Varfolomeev
    Int. J. Fatigue, 86, 52-57 (2016)
  • FIB-induced dislocations in Al submicron pillars: Annihilation by thermal annealing and effects on deformation behavior
    Lee S., J. Jeong, Y. Kim, S. Hin Han, D. Kiender, S. Ho Oh
    Acta Materialia, 110, 283-294 (2016)
  • Processing, microstructure and mechanical properties of Al-based metal matrix composites reinforced with mechanically alloyed particles
    Chaubey A.K., S. Scudino, N.K. Mukhopadhyay, J. Eckert
    J. Mater. Res., 31, 1229-1236 (2016)
  • Thermal oxidation behavior of glass-forming Ti-Zr-(Nb)-Si alloys
    Abdi S., M. Boenisch, S. Oswald, M.S. Khoshkhoo, W. Gruner, M. Lorenzetti, U. Wolff, M. Calin, J. Eckert, A. Gebert
    J. Mater. Res., 31, 1264-1274 (2016)
  • Deformation in the γ-Mg17Al12 phase at 25–278 °C
    Mathur H.N., V. Maier-Kiener, S. Korte-Kerzel
    Acta Materialia, 113, 221-229 (2016)
  • Giant heterogeneous magnetostriction in Fe-Ga alloys: Effect of trace element doping
    He Y., C. Jiang, W. Wu, B. Wang, H. Duan, H. Wang, T. Zhang, J. Wang, J. Liu, Z. Zhang, P. Stamenov, J.M.D. Coey, H. Xu
    Acta Mater., 109, 177-186 (2016)
  • The electro-mechanical behavior of sputter-deposited Mo thin films on flexible substrates
    Joerg T., M.J. Cordill, R. Franz, O. Glushko, J. Winkler, C. Mitterer
    Thin Solid Films, 606, 45-50 (2016)
  • Relationship between mechanical damage and electrical degradation in polymer-supported metal films subjected to cyclic loading
    Glushko O., A. Klug, E.J.W. List-Kratochvil, M.J. Cordill
    Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 662, 157-161 (2016)
  • Orientation of FePt nanoparticles on top of a-SiO2/Si(001), MgO(001) and sapphire(0001): effect of thermal treatments and influence of substrate and particle size
    Schilling M., P. Ziemann, Z. Zhang, J. Biskupek, U. Kaiser, U. Wiedwald
    Beilstein J. Nanotechnol., 7, 591-604 (2016)
  • Orientation of FePt nanoparticles on top of a-SiO2/Si(001), MgO(001) and sapphire(0001): effect of thermal treatments and influence of substrate and particle size
    Schilling M., P. Ziemann, Z. Zhang, J. Biskupek, U. Kaiser, U. Wiedwald
    Beilstein J. Nanotechnol., 591–604 (2016)
  • Glass-forming ability, thermal stability of B2 CuZr phase, and crystallization kinetics for rapidly solidified Cu-Zr-Zn alloys
    Wu D.Y., K.K. Song, P. Gargarella, C.D. Cao, R. Li, I. Kaban, J. Eckert
    J. Alloy. Compd., 664, 99-108 (2016)
  • High temperature mechanical properties of WC-Co hard metals
    Teppernegg T., T. Kluensner, C. Kremsner, C. Tritremmel, C. Czettl, S. Puchegger, S. Marsoner, R. Pippan, R. Ebner
    Int. J. Refract. Met. Hard Mat., 56, 139-144 (2016)
  • Laser surface remelting of a Cu-Al-Ni-Mn shape memory alloy
    da Silva M.R., P. Gargarella, T. Gustmann, W.J. Botta Filho, C.S. Kiminami, J. Eckert, S. Pauly, C. Bolfarini
    Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 661, 61-67 (2016)
  • Al-rich cubic Al0.8Ti0.2N coating with self-organized nano-lamellar microstructure: Thermal and mechanical properties
    Todt J., J. Zalesak, R. Daniel, R. Pitonak, A. Koepf, R. Weissenbacher, B. Sartory, C. Mitterer, J. Keckes
    Surf. Coat. Technol., 271, 89-93 (2016)
  • Real Hydrostatic Pressure in High-Pressure Torsion Measured by Bismuth Phase Transformations and FEM Simulations
    Edalati K., D.J. Lee, T. Nagaoka, M. Arita, H.S. Kim, Z. Horita, R. Pippan
    Mater. Trans., 57, 533-538 (2016)
  • Influence of processing parameters on the fabrication of a Cu-Al-Ni-Mn shape-memory alloy by selective laser melting
    Gustmann T., A. Neves, U. Kühn, P. Gargarella, C.S. Kiminami, c. Bofarini, J. Eckert, S. Pauls
    Additive Manufacturing, 11, 23-31 (2016)
  • Improving the glass-forming ability and plasticity of a TiCu-based bulk metallic glass composite by minor additions of Si
    Gargarella P., S. Pauly, M.S. Khoshkhoo, C.S. Kiminami, U. Kuehn, J. Eckert
    J. Alloy. Compd., 663, 531-539 (2016)
  • A study of the micro- and nanoscale deformation behavior of individual austenitic dendrites in a FeCrMoVC cast alloy using micro- and nanoindentation experiments
    Zeisig J., J. Hufenbach, H. Wendrock, T. Gemming, J. Eckert, U. Kuehn
    Appl. Phys. Lett., 108, ARTN 143103 (2016)
  • Reconfiguration of lithium sulphur batteries: "Enhancement of Li-S cell performance by employing a highly porous conductive separator coating"
    Stoeck U., J. Balach, M. Klose, D. Wadewitz, E. Ahrens, J. Eckert, L. Giebeler
    J. Power Sources, 309, 76-81 (2016)
  • About the fatigue crack propagation threshold of metals as a design criterion - A review
    Zerbst U., M. Vormwald, R. Pippan, H.P. Gaenser, C. Sarrazin-Baudoux, M. Madia
    Eng. Fract. Mech., 153, 190-243 (2016)
  • Structure-property relationships in nanoporous metallic glasses
    Sopu D., C. Soyarslan, B. Sarac, S. Bargmann, M. Stoica, J. Eckert
    Acta Mater., 106, 199-207 (2016)
  • Manipulation of free volumes in a metallic glass through Xe-ion irradiation
    Bian X.L., G. Wang, H.C. Chen, L. Yan, J.G. Wang, Q. Wang, P.F. Hu, J.L. Ren, K.C. Chan, N. Zheng, A. Teresiak, Y.L. Gao, Q.J. Zhai, J. Eckert, J. Beadsworth, K.A. Dahmen, P.K. Liaw
    Acta Mater., 106, 66-77 (2016)
  • Anisotropic deformation characteristics of an ultrafine- and nanolamellar pearlitic steel
    Kapp M.W., A. Hohenwarter, S. Wurster, B. Yang, R. Pippan
    Acta Mater., 106, 239-248 (2016)
  • Low Young's modulus Ti-based porous bulk glassy alloy without cytotoxic elements
    Nicoara M., A. Raduta, R. Parthiban, C. Locovei, J. Eckert, M. Stoica
    Acta Biomaterialia, 36, 232-331 (2016)
  • Anodically fabricated TiO2–SnO2 nanotubes and their application in lithium ion batteries
    Madian M., M. Klose, T. Jaumann, A. Gebert, S. Oswald, N. Ismail, A. Eychmüller, J. Eckert, L. Giebeler
    Journal of Materials Chemisty A, 4, 5542-5552 (2016)
  • Ab initio calculations of grain boundaries in bcc metals
    Scheiber D., R. Pippan, P. Puschnig, L. Romaner
    Model. Simul. Mater. Sci. Eng., 24, ARTN 035013 (2016)
  • In-situ Quasi-Instantaneous e-beam Driven Catalyst-Free Formation Of Crystalline Aluminum Borate Nanowires
    Gonzalez-Martinez I.G., T. Gemming, R. Mendes, A. Bachmatiuk, V. Bezugly, J. Kunstmann, J. Eckert, G. Cuniberti, M.H. Rummeli
    Sci Rep, 6, ARTN 22524 (2016)
  • Improvement of fatigue life by compliant and soft interlayers
    Kolednik O., J. Zechner, J. Predan
    Scr. Mater., 113, 1-5 (2016)
  • Wettability and work of adhesion of liquid sulfur on carbon materials for electrical energy storage applications
    Kaban I., R. Nowak, G. Bruzda, L. Xi, N. Sobczak, J. Eckert, L. Giebeler
    Carbon, 98, 702-707 (2016)
  • Electro-Mechanical Testing of Conductive Materials Used in Flexible Electronics
    Cordill M.J., O. Glushko, B. Putz
    FRONTIERS IN MATERIALS, 3, UNSP 11 (2016)
  • Kinetic analysis of the non-isothermal crystallization process, magnetic and mechanical properties of FeCoBSiNb and FeCoBSiNbCu bulk metallic glasses
    Ramasamy P., M. Stoica, A.H. Taghvaei, K.G. Prashanth, R. Kumar, J. Eckert
    J. Appl. Phys., 119, ARTN 073908 (2016)
  • Review on manufacture by selective laser melting and properties of titanium based materials for biomedical applications
    Zhang L.C., H. Attar, M. Calin, J. Eckert
    Materials Technology, 31, 66-76 (2016)
  • Shear avalanches in plastic deformation of a metallic glass composite
    Tong X., G. Wang, J. Yi, J.L. Ren, S. Pauly, Y.L. Gao, Q.J. Zhai, N. Mattern, K.A. Dahmen, P.K. Liaw, J. Eckert
    Int. J. Plast., 77, 141-155 (2016)
  • Overload effect revisited - Investigation by use of configurational forces
    Ochensberger W., O. Kolednik
    Int. J. Fatigue, 83, 161-173 (2016)
  • Preparation of cast-iron-based nanocrystalline alloy with Cu and Nb addition
    Jung H.Y., M. Stoica, S. Yi, D.H. Kim, J. Eckert
    Intermetallics, 69, 54-61 (2016)
  • Atomic structure and thermal behavior of (Co-0.65,Fe-0.35)(72)Ta8B20 metallic glass with excellent soft magnetic properties
    Taghvaei A.H., J. Bednarcik, J. Eckert
    Intermetallics, 69, 21-27 (2016)
  • Interfacial interactions between liquid Ti-Al alloys and TiB2 ceramic
    Xi L., I. Kaban, R. Nowak, G. Bruzda, N. Sobczak, J. Eckert
    J. Mater. Sci., 51, 1779-1787 (2016)
  • Exceptional damage-tolerance of a medium-entropy alloy CrCoNi at cryogenic temperatures
    Gludovatz B., A. Hohenwarter, K.V.S. Thurston, H. Bei, Z. Wu, E.P. George, R.O. Ritchie
    Nat. Commun., 7, ARTN 10602 (2016)
  • Tungsten as a Chemically-Stable Electrode Material on Ga-Containing Piezoelectric Substrates Langasite and Catangasite for High-Temperature SAW Devices
    Rane G.K., M. Seifert, S. Menzel, T. Gemming, J. Eckert
    Materials, 9, UNSP 101 (2016)
  • Ti/Al Multi-Layered Sheets: Accumulative Roll Bonding (Part A)
    Romberg J., J. Freudenberger, H. Bauder, G. Plattner, H. Krug, F. Hollaender, J. Scharnweber, A. Eschke, U. Kuehn, H. Klauss, C.G. Oertel, W. Skrotzki, J. Eckert, L. Schultz
    METALS, 6, UNSP 30 (2016)
  • Ti/Al Multi-Layered Sheets: Differential Speed Rolling (Part B)
    Romberg J., J. Freudenberger, H. Watanabe, J. Scharnweber, A. Eschke, U. Kuehn, H. Klauss, C.G. Oertel, W. Skrotzki, J. Eckert, L. Schultz
    METALS, 6, UNSP 31 (2016)
  • Microstructure and phase formation in Al-20Si-5Fe-3Cu-1Mg synthesized by selective laser melting
    Ma P., Y. Jia, K.G. Prashanth, S. Scudino, Z. Yu, J. Eckert
    J. Alloy. Compd., 657, 430-435 (2016)
  • Microstructure and metallic ion release of pure titanium and Ti-13Nb-13Zr alloy processed by high pressure torsion
    Dimic I., I. Cvijovic-Alagic, B. Voelker, A. Hohenwarter, R. Pippan, D. Veljovic, M. Rakin, B. Bugarski
    Mater. Des., 91, 340-347 (2016)
  • Reentrant spin-glass behavior and bipolar exchange-bias effect in "Sn" substituted cobalt-orthotitanate
    Nayak S., D.C. Joshi, M. Krautz, A. Waske, J. Eckert, S. Thota
    J. Appl. Phys., 119, ARTN 043901 (2016)
  • Effect of substrate material on the growth and field emission characteristics of large-area carbon nanotube forests
    Ummethala R., D. Wenger, S.F. Tedde, C. Taeschner, A. Leonhardt, B. Buechner, J. Eckert
    J. Appl. Phys., 119, ARTN 044302 (2016)
  • Miniaturized fracture experiments to determine the toughness of individual films in a multilayer system
    Treml R., D. Kozic, R. Schöngrundner, O. Kolednik, H.P. Gänser, R. Brunner, D. Kiener
    Extreme Mechanics letters, 8, 235-244 (2016)
  • The effect of bending loading conditions on the reliability of inkjet printed and evaporated silver metallization on polymer substrates
    Glushko O., M.J. Cordill, A. Klug, E.J.W. List-Kratochvil
    Microelectron. Reliab., 56, 109-113 (2016)
  • Improved cycling stability of lithium-sulfur batteries using a polypropylene-supported nitrogen-doped mesoporous carbon hybrid separator as polysulfide adsorbent
    Balach J., T. Jaumann, M. Klose, S. Oswald, J. Eckert, L. Giebeler
    J. Power Sources, 303, 317-324 (2016)
  • Microstructural evolution and strength variability in microwires
    Agepati S., P. Ghosh, A.H. Chokshi
    Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 652, 239-249 (2016)
  • High resolution determination of local residual stress gradients in single- and multilayer thin film systems
    Treml R., D. Kozic, J. Zechner, X. Maeder, B. Satory, H.P. Gänser, R. Schöngrundner, J. Michler, R. Brunner, D. Kiener
    Acta Materialia, 103, 616-623 (2016)
  • Processing of Al-12Si-TNM composites by selective laser melting and evaluation of compressive and wear properties
    Prashanth K.G., S. Scudino, A.K. Chaubey, L. Loeber, P. Wang, H. Attar, F.P. Schimansky, F. Pyczak, J. Eckert
    J. Mater. Res., 31, 55-65 (2016)
  • Localized crystallization in shear bands of a metallic glass
    Yan Z., K. Song, Y. Hu, F. Dai, Z. Chu, J. Eckert
    Sci Rep, 6, ARTN 19358 (2016)
  • Two-phase quasi-equilibrium in β-type Ti-based bulk metallic glass composites
    Zhang L., S. Pauly, M.Q. Tang, J. Eckert, H.F. Zhang
    Scientific Reports, 6, 1-10 (2016)
  • Microstructure and properties of FeCrMoVC tool steel produced by selective laser melting
    Sander J., J. Hufenbach, L. Giebeler, H. Wendrock, U. Kuehn, J. Eckert
    Mater. Des., 89, 335-341 (2016)
  • Deformation and fracture characteristics of ultrafine-grained vanadium
    Hohenwarter A., S. Wurster
    Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 650, 492-496 (2016)
  • Structure and properties of sputter deposited crystalline and amorphous Cu-Ti films
    Turnow H., H. Wendrock, S. Menzel, T. Gemming, J. Eckert
    Thin Solid Films, 598, 184-188 (2016)
  • Cross-sectional structure-property relationship in a graded nanocrystalline Ti1−xAlxN thin film
    Zalesak J., M. Bartosik, R. Daniel, C. Mitterer, C. Krywka, D. Kiener, P.H. Mayrhofer, J. Keckes
    Acta Materialia, 102, 212-219 (2016)
  • Magnetic compensation, field-dependent magnetization reversal, and complex magnetic ordering in Co2TiO4
    Nayak S., S. Thota, D.C. Joshi, M. Krautz, A. Waske, A. Behler, J. Eckert, T. Sarkar, M.S. Andersson, R. Mathieu, V. Narang, M.S. Seehra
    Phys. Rev. B, 92, ARTN 214434 (2015)
  • High-Temperature Characterization of Silicon Dioxide Films with Wafer Curvature
    Bigl S., W. Heinz, M. Kahn, H. Schoenherr, M.J. Cordill
    JOM, 67, 2902-2907 (2015)
  • Thermally Activated Deformation Behavior of ufg-Au: Environmental Issues During Long-Term and High-Temperature Nanoindentation Testing
    Maier V., A. Leitner, R. Pippan, D. Kiener
    JOM, 67, 2934-2944 (2015)
  • Microstructure characterization of Al-Cr-Fe quasicrystals sintered using spark plasma sintering
    Li R.T., Z.L. Dong, V.K. Murugan, Z.L. Zhang, K.A. Khor
    Mater. Charact., 110, 264-271 (2015)
  • Hybrid nanostructured aluminum alloy with super-high strength
    Wang Z., R.T. Qu, S. Scudino, B.A. Sun, K.G. Prashanth, D.V. Louzguine-Luzgin, M.W. Chen, Z.F. Zhang, J. Eckert
    NPG Asia Mater., 7, ARTN e229 (2015)
  • Size Effects on Strength in the Transition from Single-to-Polycrystalline Behavior
    Ghosh P., A.H. Chokshi
    Metall. Mater. Trans. A-Phys. Metall. Mater. Sci., 46A, 5671-5684 (2015)
  • Deformation-Induced Martensitic Transformation in Cu-Zr-Zn Bulk Metallic Glass Composites
    Wu D., K. Song, C. Cao, R. Li, G. Wang, Y. Wu, F. Wan, F. Ding, Y. Shi, X. Bai, I. Kaban, J. Eckert
    METALS, 5, 2134-2147 (2015)
  • Deformation Behavior and Microstructural Evolution of Cu-Ag Alloys Processed by High-Pressure Torsion
    Kormout K.S., B. Yang, R. Pippan
    Adv. Eng. Mater., 17, 1828-1834 (2015)
  • Dynamic nanoindentation testing for studying thermally activated processes from single to nanocrystalline metals
    Durst K., V. Maier
    CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE, 340-353 (2015)
  • In Situ Observations of Free-Standing Graphene-like Mono- and Bilayer ZnO Membranes
    Quang H.T., A. Bachmatiuk, A. Dianat, F. Ortmann, J. Zhao, J.H. Warner, J. Eckert, G. Cunniberti, M.H. Ruemmeli
    ACS Nano, 9, 11408-11413 (2015)
  • Imprinting bulk amorphous alloy at room temperature
    Kim S., E. Park, R.T. Ott, T.A. Lograsso, M. Huh, D. Kim, J. Eckert, M. Lee
    Sci Rep, 5, ARTN 16540 (2015)
  • Residual stress within nanoscale metallic multilayer systems during thermal cycling
    Economy D.R., M.J. Cordill, E.A. Payzant, M.S. Kennedy
    Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 648, 289-298 (2015)
  • Adhesion energy of printed circuit board materials using four-point-bending validated with finite element simulations
    Schöngrundner R., M.J. Cordill, G.A. Maier, H.-P. Gänser
    Microelectronics Reliability, 2382-2390 (2015)
  • In-Situ Measurements of Free-standing, Ultra-thin Film Cracking in Bending
    Hintsala E., D. Kiener, J. Jackson, W.W. Gerberich
    Experimental Mechanics, 55, 1681-1690 (2015)
  • Modeling of Fatigue Crack Growth: Dislocation Models
    Pippan R., F.O. Riemelmoser
    Reference Module in Materials Science and Materials Engineering (2015)
  • Effects of microstructure and crystallography on crack path and intrinsic resistance to shear-mode fatigue crack growth. Fracture and Structural Integrity
    Pokluda J., T. Vojtek, A. Hohenwarter, R. Pippan
    Fracture and Structural Integrity, 142-149 (2015)
  • Ab initio studies on the adsorption and implantation of Al and Fe to nitride materials
    Riedl H., J. Zalesak, M. Arndt, P. Polcik, D. Holec, P.H. Mayrhofer
    J. Appl. Phys., 118, ARTN 125306 (2015)
  • Precipitation behavior of an ultra-fine grained Mg-Zn alloy processed by high-pressure torsion
    Meng F., J.M. Rosalie, A. Singh, K. Tsuchiya
    Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 644, 386-391 (2015)
  • Simulation of high pressure torsion tests of pearlitic steel
    Larijani N., C. Kammerhofer, M. Ekh
    J. Mater. Process. Technol., 223, 337-343 (2015)
  • Thermally activated deformation processes in body-centered cubic Cr - How microstructure influences strain-rate sensitivity
    Maier V., A. Hohenwarter, R. Pippan, D. Kiener
    Scr. Mater., 106, 42-45 (2015)
  • Nanocrystalline steel obtained by mechanical alloying of iron and graphite subsequently compacted by high-pressure torsion
    Borchers C., C. Garve, M. Tiegel, M. Deutges, A. Herz, K. Edalati, R. Pippan, Z. Horita, R. Kirchheim
    Acta Mater., 97, 207-215 (2015)
  • Mechanical properties, microstructure and thermal stability of a nanocrystalline CoCrFeMnNi high-entropy alloy after severe plastic deformation
    Schuh B., F. Mendez-Martin, B. Voelker, E.P. George, H. Clemens, R. Pippan, A. Hohenwarter
    Acta Mater., 96, 258-268 (2015)
  • Thickness effect on the fracture and delamination of titanium films
    Cordill M.J., A.A. Taylor
    Thin Solid Films, 589, 209-214 (2015)
  • Influence of inclined twin boundaries on the deformation behavior of Cu micropillars
    Imrich P.J., C. Kirchlechneriz, G. Dehm
    Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 642, 65-70 (2015)
  • Revisiting fatigue crack growth in various grain size regimes of Ni
    Leitner T., A. Hohenwarter, R. Pippan
    Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 646, 294-305 (2015)
  • Thermal expansion of rock-salt cubic AIN
    Bartosik M., M. Todt, D. Holec, J. Todt, L. Zhou, H. Riedl, H.J. Böhm, F.G. Rammerstorfer, P.H. Mayrhofer
    APPLIED PHYSICS LETTERS, 071602 (2015)
  • In Situ TEM Microcompression of Single and Bicrystalline Samples: Insights and Limitations
    Imrich P.J., C. Kirchlechner, D. Kiener, G. Dehm
    JOM, 67, 1704-1712 (2015)
  • Carbon distribution in multi-phase gamma-TiAl based alloys and its influence on mechanical properties and phase formation
    Klein T., M. Schachermayer, F. Mendez-Martin, T. Schoeberl, B. Rashkova, H. Clemens, S. Mayer
    Acta Mater., 94, 205-213 (2015)
  • On the reversibility of dislocation slip during small scale low cycle fatigue
    Kirchlechner C., P.J. Imrich, W. Liegl, J. Poernbacher, J.-S. Micha, O. Ulrich, C. Motz
    Acta Mater., 94, 69-77 (2015)
  • Corrosion Fatigue of Austenitic Stianless Steel in Different Hot Chloride Solutions
    Visser A., G. Mori, M. Panzenböck, R. Pippan
    Corrosion Science and Technology, 14, 172-176 (2015)
  • Mechanical property enhancement in laminates through control of morphology and crystal orientation
    Zeilinger A., R. Daniel, M. Stefenelli, B. Sartory, L. Chitu, M. Burghammer, T. Schoeberl, O. Kolednik, J. Keckes, C. Mitterer
    J. Phys. D-Appl. Phys., 48, ARTN 295303 (2015)
  • Analysis of fatigue crack propagation under mixed mode II plus III in ARMCO iron
    Vojtek T., J. Pokluda, P. Sandera, J. Hornikova, A. Hohenwarter, R. Pippan
    Int. J. Fatigue, 76, 47-52 (2015)
  • Microstructural evolution and grain refinement in an intermetallic titanium aluminide alloy with a high molybdenum content
    Rashkova B., K. Spiradek-Hahn, M. Brabetz, Z.L. Zhang, T. Schoeberl, H. Clemens, S. Mayer
    Int. J. Mater. Res., 106, 725-731 (2015)
  • Nitrogen atom shift and the structural change in chromium nitride
    Wan P., Z.L. Zhang, D. Holec, R. Daniel, C. Mitterer, H. Duan
    Acta Mater., 98, 119-127 (2015)
  • Adhesion measurement of a buried Cr interlayer on polyimide
    Marx V.M., C. Kirchlechner, . Zizak, M.J. Cordill, G. Dehm
    Philos. Mag., 95, 1982-1991 (2015)
  • Microstructure-dependent deformation behaviour of bcc-metals - indentation size effect and strain rate sensitivity
    Maier V., C. Schunk, M. Goeken, K. Durst
    Philos. Mag., 95, 1766-1779 (2015)
  • Microstructure-controlled depth gradients of mechanical properties in thin nanocrystalline films: Towards structure-property gradient functionalization
    Daniel R., A. Zeilinger, T. Schoeberl, B. Sartory, C. Mitterer, J. Keckes
    J. Appl. Phys., 117, ARTN 235301 (2015)
  • The peculiarity of the metal-ceramic interface
    Zhang Z.L., Y. Long, S. Cazottes, R. Daniel, C. Mitterer, G. Dehm
    Sci Rep, 5, ARTN 11460 (2015)
  • Improved electro-mechanical performance of gold films on polyimide without adhesion layers
    Putz B., R.L. Schoeppner, O. Glushko, D.F. Bahr, M.J. Cordill
    Scr. Mater., 102, 23-26 (2015)
  • Production of Bulk Metallic Glasses by Severe Plastic Deformation
    Kraemer L., K.S. Kormout, D. Setman, Y. Champion, R. Pippan
    METALS, 5, 720-729 (2015)
  • Propagation of Long Fatigue Cracks under Remote Modes II and III in Ferritic-Pearlitic Steel
    Vojtek T., J. Pokluda, A. Hohenwarter, R. Pippan
    Acta Phys. Pol. A, 128, 611-614 (2015)
  • Interface fracture and chemistry of a tungsten-based metallization on borophosphosilicate glass
    B. Völker, W. Heinz, K. Matoy, R. Roth, J.M. Batke, T. Schöberl, C. Scheu, G. Dehm
    Philosophical Magazine, 1-15 (2015)
  • Mechanical and chemical investigation of the interface between tungsten-based metallizations and annealed borophosphosilicate glass
    Voelker B., W. Heinz, K. Matoy, R. Roth, J.M. Batke, T. Schoeberl, M.J. Cordill, G. Dehm
    Thin Solid Films, 583, 170-176 (2015)
  • Downscaling metal-dielectric interface fracture experiments to sub-micron dimensions: A feasibility study using TEM
    Voelker B., W. Heinz, R. Roth, J.M. Batke, M.J. Cordill, G. Dehm
    Surf. Coat. Technol., 270, 1-7 (2015)
  • Small scale mechanical testing of irradiated materials
    Hosemann P., C. Shin, D. Kiener
    JOURNAL OF MATERIALS RESEARCH, 30, 1231-1245 (2015)
  • Microstructure and mechanical properties of CuxNb1-x alloys prepared by ball milling and high pressure torsion compacting
    Abad M.D., S. Parker, D. Kiener, M.M. Primorac, P. Hosemann
    Journal of Alloys and Compounds, 117-125 (2015)
  • The influence of a brittle Cr interlayer on the deformation behavior of thin Cu films on flexible substrates: Experiment and model
    Marx V.M., F. Toth, A. Wiesinger, J. Berger, C. Kirchlechner, M.J. Cordill, F.D. Fischer, F.G. Rammerstorfer, G. Dehm
    Acta Mater., 89, 278-289 (2015)
  • Resolving depth evolution of microstructure and hardness in sputtered CrN film
    Zeilinger A., R. Daniel, T. Schoeberl, M. Stefenelli, B. Sartory, J. Keckes, C. Mitterer
    Thin Solid Films, 581, 75-79 (2015)
  • Following crack path selection in multifilm structures with weak and strong interfaces by in situ 4-point-bending
    Voelker B., S. Venkatesan, W. Heinz, K. Matoy, R. Roth, J.M. Batke, M.J. Cordill, G. Dehm
    J. Mater. Res., 30, 1090-1097 (2015)
  • Ab initio description of segregation and cohesion of grain boundaries in W-25 at.% Re alloys
    Scheiber D., V.I. Razumovskiy, P. Puschnig, R. Pippan, L. Romaner
    Acta Mater., 88, 180-189 (2015)
  • Correlative characterization of primary Al-3(Sc,Zr) phase in an Al-Zn-Mg based alloy
    Li J.H., M. Wiessner, M. Albu, S. Wurster, B. Sartory, F. Hofer, P. Schumacher
    Mater. Charact., 102, 62-70 (2015)
  • Controllable synthesis of palladium nanocubes/reduced graphene oxide composites and their enhanced electrocatalytic performance
    Zhang Y., Q. Huang, G. Chang, Z.L. Zhang, T. Xia, H. Shu, Y. He
    J. Power Sources, 280, 422-429 (2015)
  • Internal and external stresses: In situ TEM compression of Cu bicrystals containing a twin boundary
    Imrich P.J., C. Kirchlechner, D. Kiener, G. Dehm
    Scr. Mater., 100, 94-97 (2015)
  • Measuring electro-mechanical properties of thin films on polymer substrates
    Cordill M.J., O. Glushko, J. Kreith, V.M. Marx, C. Kirchlechner
    Microelectron. Eng., 137, 96-100 (2015)
  • Fracture and fracture toughness of nanopolycrystalline metals produced by severe plastic deformation
    Hohenwarter A., R. Pippan
    Philos. Trans. R. Soc. A-Math. Phys. Eng. Sci., 373, ARTN 20140366 (2015)
  • Physically appropriate characterization of fatigue crack propagation rate in elastic-plastic materials using the -integral concept
    Ochensberger W., O. Kolednik
    Int. J. Fract., 192, 25-45 (2015)
  • Microstructural thermal stability of CNT-reinforced composites processed by severe plastic deformation
    Suarez S., F. Lasserre, F. Soldera, R. Pippan, F. Muecklich
    Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 626, 122-127 (2015)
  • Incremental high pressure torsion as a novel severe plastic deformation process: Processing features and application to copper
    Hohenwarter A.
    Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 626, 80-85 (2015)
  • X-ray nanodiffraction reveals stress distribution across an indented multilayered CrN-Cr thin film
    Stefanelli M., R. Daniel, W. Ecker, D. Kiener, J. Todt, A. Zeilinger, C. Mitterer, M. Burghammer, J. Keckes
    Acta Materialia, 24-31 (2015)
  • Elevated temperature mechanical properties of novel ultra-fine grained Cu-Nb composites
    Primorac M.M., M.D. Abad, P. Hosemann, M. Kreuzeder, V. Maier, D. Kiener
    Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 625, 296-302 (2015)
  • Fabrication and thermo-mechanical behavior of ultra-fine porous copper
    M. Kreuzeder, M.-D. Abad, M.-M. Primorac, P. Hosemann, V. Maier, D. Kiener
    Journal of Materials Science, 634-643 (2015)
  • Cyclic bending experiments on free-standing Cu micron lines observed by electron backscatter diffraction
    Wimmer A., W. Heinz, T. Detzel, W. Robl, M. Nellessen, C. Kirchlechner, G. Dehm
    Acta Mater., 83, 460-469 (2015)
  • Modified Kitagawa-Takahashi diagram accounting for finite notch depths
    Maierhofer J., H.-P. Gaenser, R. Pippan
    Int. J. Fatigue, 70, 503-509 (2015)
  • Increasing the strength of nanocrystalline steels by annealing: Is segregation necessary?
    Renk O., A. Hohenwarter, K. Eder, K.S. Kormout, J.M. Cairney, R. Pippan
    Scr. Mater., 95, 27-30 (2015)
  • Copper diffusion into single-crystalline TiN studied by transmission electron microscopy and atom probe tomography
    Muehlbacher M., F. Mendez-Martin, B. Sartory, N. Schalk, J. Keckes, J. Lu, L. Hultman, C. Mitterer
    Thin Solid Films, 574, 103-109 (2015)
  • Influence of metastable retained austenite on macro and micromechanical properties of steel processed by the Q&P process
    H. Jirková, B. Mašek, M. F.-X. Wagner, D. Langmajerová, L. Kucerová, R. Treml, D. Kiener
    Journal of Alloys and Compounds, 163-168 (2014)
  • Effect of a single soft interlayer on the crack driving force
    M. Sistaninia, O. Kolednik
    Engineering Fracture Mechanics, 21-41 (2014)
  • A combinatorial X-ray sub-micron diffraction study of microstructure, residual stress and phase stability in TiAlN coatings
    A. Riedl, R. Daniel, J. Todt, M. Stefenelli, D. Holec, B. Sartory, C. Krywka, M. Müller, C. Mitterer, J. Keckes
    Surface & Coatings Technology, 108-113 (2014)
  • Eine Legierung aus fünf Metallen
    A. Hohenwarter B.G.
    , 1 (2014)
  • On problems with the determination of the fracture resistance for materials with spatial variations of the Young’s modulus
    R.D. Fischer, J. Predan, R. Müller, O. Kolednik
    International Journal of Fracture, 23-38 (2014)
  • Leobener Forscher finden neue Kältelegierung
    A. Hohenwarter
    , 1 (2014)
  • Legierung mit einem hohen Potenzial
    A. Hohenwarter
    , 1 (2014)
  • Neue Legierung wird bei tiefen Temperaturen zäher statt spröder
    A. Hohenwarter
    , 1 (2014)
  • Innovatives Legierungskonzept mit außergewöhnlichen Eigenschaften
    A. Hohenwarter
    , 1 (2014)
  • Neue Legierung auch für Tieftemperatur
    A. Hohenwarter
    , 1 (2014)
  • A new basis for the application of the J -integral for cyclically loaded cracks in elastic–plastic materials
    W. Ochensberger, O. Kolednik
    International Journal of Fracture, 77-101 (2014)
  • Transmission electron microscope investigations on Cu-Ag alloys produced by high-pressure torsion
    K. Kormout, B. Yang, R. Pippan
    Materials Science and Engineering, 1-9 (2014)
  • Deformation behavior of Cu-compoties processed by HPT
    L. Krämer, S. Wurster, R. Pippan
    Materials Science and Engineering, 1-9 (2014)
  • Microstructural evolution in immiscible alloys processed by High-Pressure Torsion
    A. Bachmaier, E. Neubauer, M. Kitzmantel, R. Pippan, C. Motz
    Materials Science and Engineering, 1-8 (2014)
  • Microcantilever bending experiments in NiAl – Evaluation, size effects, and crack tip plasticity
    J. Ast, T. Przybilla, V. Maier, K. Durst, M. Göken
    Journal of Materials Research, 2129-2140 (2014)
  • Experimental and Theoretical Confirmation of the Scaling Exponent 2 in Pyramidal Load Displacement Data for Depth Sensing Indentation
    B. Merle, V. Maier, K. Durst
    Scanning, 526-529 (2014)
  • A fracture-resistant high-entropy alloy for cryogenic applications
    B. Gludovatz, A. Hohenwarter, D. Catoor, E.H. Chang, E.P. George, R.O. Ritchie
    Science, 1153-1158 (2014)
  • 3D Morphology of Fracture Surfaces Created by Mixed-mode II+III Fatigue Loading in Metallic Materials
    T. Vojtek, J. Pokluda, A. Hohenwarter, K. Slamecka, R. Pippan
    Procedia Engineering, 74-77 (2014)
  • Intrinsic and extrinsic size effects in the deformation of amorphous CuZr/nanocrystalline Cu nanolaminates
    W. Guo, E. Jägle, J. Yao, V. Maier, S. Korte-Kerzel, J.M. Schneider, D. Raabe
    Acta Materialia, 94-106 (2014)
  • Direct evidence for grain boundary motion as the dominant restoration mechanism in the steady-state regime of extremely cold-rolled copper
    O. Renk, A. Hohenwarter, S. Wurster, R. Pippan
    Acta Materialia, 401-410 (2014)
  • Superior oxidation resistance, mechanical properties and residual stresses of an Al-rich nanolamellar Ti<sub>0.05</sub>Al<sub>0.95</sub>N coating prepared by CVD
    J. Todt, R. Pitonak, A. Köpf, R. Weißenbacher, B. Sartory, M. Burghammer, R. Daniel, T. Schöberl, J. Keckes
    Surface & Coatings Technology, 1119-1127 (2014)
  • Evolution of residual stress and damage in coated hard metal milling inserts over the complete tool life
    T. Teppernegg, T. Klünsner, P. Angerer, C. Tritremmel, C. Czettl, J. Keckes, R. Ebner, R. Pippan
    International Journal of Refractory Metals and Hard Materials, 80-85 (2014)
  • Tungsten (W) Laminate Pipes for Innovative High Temperature Energy Conversion Systems
    J. Reiser, M. Rieth, A. Möslang, H. Greuner, D.E.J. Armstrong, T. Denk, T. Gräning, W. Hering, A. Hoffmann, J. Hoffmann, H. Leiste, T. Mrotzek, R. Pippan, W. Schulmeyer, T. Weingärtner, A. Zabernig
    Advanced Engineering Materials, 1-11 (2014)
  • Rail grade dependent damage behaviour – Characteristics and damage formation hypothesis
    R. Stock, R. Pippan
    Wear, 44-50 (2014)
  • Critical assessment of the determination of residual stress profiles in thin films by means of the ion beam layer removal method
    R. Schöngrundner, R. Treml, T. Antretter, D. Kozic, W. Ecker, D. Kiener, R. Brunner
    Thin Solid Films, 321-330 (2014)
  • New insights into single-grain mechanical behavior from temperature-dependent 3-D coherent X-ray diffraction
    N. Vaxelaire, S. Labat, T.W. Cornelius, C. Kirchlechner, J. Keckes, T. Schulli, O. Thomas
    Acta Materialia, 46-55 (2014)
  • Core polarity of screw dislocations in Fe–Co alloys
    L. Romaner, V.I. Razumovskiy, R. Pippan
    Philosophical Magazine Letters, 334-341 (2014)
  • Influence of heat treatment on the microstructural evolution of Al–3 wt.% Cu during high-pressure torsion
    A. Hohenwarter, M. Faller, B. Rashkova, R. Pippan
    Philosophical Magazine Letters, 342-350 (2014)
  • Microstructural evolution of a focused ion beam fabricated Mg nanopillar at high temperatures: Defect annihilation and sublimation
    J. Jeong, S. Lee, Y. Kim, S. Min Han, D. Kiener, Y.-B. Kangd, S.H. Oh
    Scripta Materialia, 44-47 (2014)
  • Mono-textured nanocrystalline thin films with pronounced stress-gradients: On the role of grain boundaries in the stress evolution
    R. Daniel, E. Jäger, J. Todt, B. Sartory, C. Mitterer, J. Keckes
    Journal of Applied Physics, 203507-1-9 (2014)
  • Impurity effects on the nucleation and growth of primary Al3(Sc,Zr) phase in Al alloys
    J.H. Li, B. Oberdorfer, S. Wurster, P. Schumacher
    Journal of Materials Science, 5961-5977 (2014)
  • Structure and properties of a nanoscaled composition modulated metallic glass
    X. Sauvage, Y. Champion, R. Pippan, F. Cuvilly, L. Perrie`re, A. Akhatova, O. Renk
    Journal of Materials Science, 5640-5645 (2014)
  • New insights on the formation of supersaturated solid solutions in the Cu–Cr system deformed by high-pressure torsion
    A. Bachmaier, G.B. Rathmayr, M. Bartosik, D. Apel, Z. Zhang, R. Pippan
    Acta Materialia, 301-313 (2014)
  • A novel laboratory test rig for probing the sensitivity of rail steels to RCF and wear – first experimental results
    C. Kammerhofer, A. Hohenwarter, R. Pippan
    Wear, 101-108 (2014)
  • Megan Cordill Finds "Piece" in Quilting
    M.J. Cordill
    JOM, 540-541 (2014)
  • Fracture and R-curve behavior of an intermetallic b-stabilized TiAl alloy with different nearly lamellar microstructures
    T. Leitner, M. Schloffer, S. Mayer, J. Eßlinger, H. Clemens, R. Pippan
    Intermetallics, 1-9 (2014)
  • Differences in deformation behavior of bicrystalline Cu micropillars containing a twin boundary or a large-angle grain boundary
    P.J. Imrich, C. Kirchlechner, C. Motz, G. Dehm
    Acta Materialia, 240-250 (2014)
  • Enhanced toughness and stable crack propagation in a novel tungsten fibre-reinforced tungsten composite produced by chemical vapour infiltration
    J. Riesch, T. Höschen, C. Linsmeier, S. Wurster, J.-H. You
    Physica Scripta, 1-7 (2014)
  • Electrical Resistance Decrease Due to Grain Coarsening Under Cyclic Deformation
    O. Glushko, M.J. Cordill
    JOM, 598-601 (2014)
  • Die Versagensmechanismen pressgehärteter und hochfester Stähle im Dreipunkt-Biegeversuch
    K.B. Benedyk, A. Pichler, T. Kurz, O. Kolednik
    BHM, 122-129 (2014)
  • Near-threshold behaviour of shear-mode fatigue cracks in metallic materials
    J. Pokluda, R. Pippan, T. Vojtek, A. Hohenwarter
    Fatigue & Fracture of Engineering Materials & Structures, 232-254 (2014)
  • Growth mechanism of Al2Cu precipitates during in situ TEM heating of a HPT deformed Al–3wt.%Cu alloy
    B. Rashkova, M. Faller, R. Pippan, G. Dehm
    Journal of Alloys and Compounds, 43-50 (2014)
  • Grain boundary excess volume and defect annealing of copper after high-pressure torsion
    B. Oberdorfer, D. Setman, E.-M. Steyskal, A. Hohenwarter, W. Sprengel, M. Zehetbauer, R. Pippan, R. Würschum
    Acta Materialia, 189-195 (2014)
  • The Strengthening Effect of Phase Boundaries in a Severely Plastically Deformed Ti-Al Composite Wire
    T. Marr, J. Freudenberger, V. Maier, H.W. Höppel, M. Göken, L. Schultz
    Metals, 37-54 (2014)
  • Damage evolution during cyclic tension-tension loading of micron-sized Cu lines
    A. Wimmer, A. Leitner, T. Detzel, W. Robl, W. Heinz, R. Pippan, G. Dehm
    Acta Materialia, 297-307 (2014)
  • Improvements of strength and fracture resistance by spatial material property variations
    O. Kolednik, J. Predan, R.D. Fischer, P. Fratzl
    Acta Materialia, 279-294 (2014)
  • Modified NASGRO equation for physically short cracks
    J. Maierhofer, R. Pippan, H.-P. Gänser
    International Journal of Fatigue, 200-207 (2014)
  • Macroscopic Fracture Behaviour of CrN Hard Coatings Evaluated by X-Ray Diffraction Coupled with Four-Point Bending
    M. Stefenelli, A. Riedl, J. Todt, M. Bartosik, R. Daniel, C. Mitterer, J. Keckes
    Materials Science Forum, 272-279 (2014)
  • Depth-resolved residual stress analysis with high-energy synchrotron X-rays using a conical slit cell
    P. Staron, T. Fischer, J. Keckes, S. Schratter, T. Hatzenbichler, N. Schell, M. Müller, A. Schreyer
    Materials Science Forum, 72-75 (2014)
  • Evolution of the &omega;<sub>o</sub> phase in a &beta;-stabilized multi-phase TiAl alloy and its effect on hardness
    M. Schloffer, B. Rashkova, T. Schöberl, E. Schwaighofer, Z. Zhang, H. Clemens, S. Mayer
    Acta Materialia, 241-252 (2014)
  • Supersaturation in Ag–Ni alloy by two-step high-pressure torsion processing
    A. Bachmaier, J. Keckes, K. Kormout, R. Pippan
    Philosophical Magazine Letters, 9-17 (2014)
  • Recovery of electrical resistance in copper films on polyethylene terephthalate subjected to a tensile strain
    O. Glushko, V.M. Marx, C. Kirchlechner, I. Zizak, M.J. Cordill
    Thin Solid Films, 141-145 (2014)
  • Electrical Resistance of Metal Films on Polymer Substrates Under Tension
    O. Glushko, M.J. Cordill
    Experimental Techniques, 1-8 (2014)
  • Multicomponent materials from machining chips compacted by equal-channel angular pressing
    R. Lapovok, Y. Qi, H.P. Ng, V. Maier, Y. Estrin
    Journal of Materials Science, 1193-1204 (2014)
  • A new view on J-integrals in elastic–plastic materials
    O. Kolednik, R. Schöngrundner, F.D. Fischer
    International Journal of Fracture, 77-107 (2014)
  • Reversible cyclic deformation mechanism of gold nanowires by twinning–detwinning transition evidenced from in situ TEM
    S. Lee, J. Im, Y. Yoo, E. Bitzek, D. Kiener, G. Richter, B. Kim, S.H. Oh
    nature communications, 5:3033, 1-10 (2014)
  • Radial crystalline texture in a lyocell fibre revealed by synchrotron nanofocus wide-angle X-ray scattering
    W. Gindl-Altmutter, S.J. Eichhorn, M. Burghammer, J. Keckes
    Cellulose, 1-7 (2013)
  • Fracture resistance of aluminum multilayer composites
    J. Zechner, O. Kolednik
    Engineering Fracture Mechanics, 489-500 (2013)
  • Fragmentation testing for ductile thin films on polymer substrates
    M.J. Cordill, V.M. Marx
    Philosophical Magazine Letters, 618-624 (2013)
  • Percolating porosity in ultrafine grained copper processed by High Pressure Torsion
    M. Wegner, J. Leuthold, M. Peterlechner, D. Setman, M. Zehetbauer, R. Pippan, S.V. Divinski, G. Wilde
    Journal of Applied Physics, 183509-1 - 183509-10 (2013)
  • Current oscillations in the layer-by-layer electrochemical deposition of vertically aligned nanosheets of zinc hydroxide nitrate
    W. Sun, K. Wu, M.A. Thomas, F. Meng, X. Song, Z. Sun, Z. Zhang, J. Cui
    Journal of the Electrochemical Society, D558-D564 (2013)
  • Origins of microstructure and stress gradients in nanocrystalline thin films: The role of growth parameters and self-organization
    R. Daniel, J. Keckes, I. Matko, M. Burghammer, C. Mitterer
    Acta Materialia, 6255-6266 (2013)
  • Cross-sectional X-ray nanobeam diffraction analysis of a compositionally graded CrNx thin film
    M. Bartosik, R. Daniel, C. Mitterer, I. Matko, M. Burghammer, P.H. Mayrhofer, J. Keckes
    Thin Solid Films, 1-4 (2013)
  • Reinhard Pippan träumt vom festen Stoff
    R. Pippan
    , 1 (2013)
  • Drei neue Erc-grants
    R. Pippan, M. Henzinger, J. Penninger
    , 1 (2013)
  • About application of three dimensional analyses of fracture surfaces in fracture study on nanostructured titanium
    I. Sabirov, R.Z. Valiev, R. Pippan
    Computational Materials Science, 72-79 (2013)
  • An in-situ high-energy X-ray diffraction study on the hot-deformation behavior of a b-phase containing TiAl alloy
    T. Schmoelzer, K.D. Liss, C. Kirchlechner, S. Mayer, A. Stark, M. Peel, H. Clemens
    Intermetallics, 25-33 (2013)
  • Three-dimensional morphology of fracture surfaces generated by modes II and III fatigue loading in ferrite and austenite
    T. Vojtek, J. Pokluda, A. Hohenwarter, R. Pippan
    Engineering Fracture Mechanics, 285-293 (2013)
  • ERC Advanced Grants an mehrere österreichische Wissenschaftler vergeben
    R. Pippan
    , 1 (2013)
  • Self-organized periodic soft-hard nanolamellae in polycrystalline TiAlN thin films
    J. Keckes, R. Daniel, C. Mitterer, I. Matko, B. Sartory, A. Koepf, R. Weißenbacher, R. Pitonak
    Thin Solid Films, 545, 29-32 (2013)
  • EU-Spitzenforschungspreis an Leobener Physiker
    R. Pippan
    , 1 (2013)
  • Leobener Physiker Reinhard Pippan erhält EU-Spitzenforschungspreis
    R. Pippan
    , 1 (2013)
  • EU-Spitzenforschungspreis an Physiker Reinhard Pippan
    R. Pippan
    , 1 (2013)
  • Transmission electron microscopy charaterization of CrN films on MgO(001)
    T.P. Harzer, R. Daniel, C. Mitterer, G. Dehm, Z. Zhang
    Thin Solid Films, 154-160 (2013)
  • Influence of morphology and structural size on the fracture behavior of a nanostructured pearlitic steel
    C. Kammerhofer, A. Hohenwarter, S. Scheriau, H.P. Brantner, R. Pippan
    Materials Science & Engineering A, 190-196 (2013)
  • United in Our Differences: Changing the Face of MSE
    M.J. Cordill
    JOM, 828 (2013)
  • X-ray analysis of residual stress gradients in TiN coatings by a Laplace space approach and crosssectional nanodiffraction: a critical comparison
    M. Stefenelli, J. Todt, A. Riedl, W. Ecker, T. Müller, R. Daniel, M. Burghammer, J. Keckes
    Journal of Applied Crystallography, 46, 1-8 (2013)
  • Elastoplastic buckling as source of misinterpretation of micropillar tests
    B. Daum, G. Dehm, H. Clemens, M. Rester, F.D. Fischer, F.G. Rammerstorfer
    Acta Materialia, 4996-5007 (2013)
  • Development of a New Testing Procedure for Performing Tensile Tests on Specimens with Sub-Millimetre Dimensions
    G.B. Rathmayr, A. Bachmaier, R. Pippan
    Journal of Testing and Evaluation, 1-12 (2013)
  • The Effect of High Pressure Torsion on Structural Refinement and Mechanical Properties of an Austenitic Stainless Steel
    A.T. Krawczynska, M. Lewandowska, R. Pippan, K.J. Kurzydlowski
    Journal of Nanoscience and Nanotechnology, 3246-3249 (2013)
  • Near-threshold propagation of mode II and mode III fatigue cracks in ferrite and austenite
    T. Vojtek, R. Pippan, A. Hohenwarter, L. Holán, J. Pokluda
    Acta Materialia, 4625-4635 (2013)
  • Microcompression and cyclic deformation behaviors of coaxial copper bicrystals with a single twin boundary
    L.L. Li, X.H. An, P.J. Imrich, P. Zhang, Z.J. Zhang, G. Dehm, Z.F. Zhang
    Scripta Materialia, 199-202 (2013)
  • Brief summary of the progress on the EFDA tungsten materials
    Rieth M. D.S.L.
    Journal of Nuclear Materials, 442, 173-180 (2013)
  • Diffusive and massive phase transformations in TieAleNb alloys - Modelling and experiments
    Gamsjäger E. L.Y.
    Intermetallics, 126-138 (2013)
  • Generation of metallic nanocomposites by severe plastic deformation
    Bachmaier Andrea P.R.
    International Materials Reviews, 41-62 (2013)
  • Paper multilayer with a fracture toughness of steel
    Zechner J., O. Kolednik
    Journal of Materials Science, 48, 5180-5187 (2013)
  • Recent progress in R&D on tungsten alloys for divertor structural and plasma facing materials
    Wurster Stefan B.N.
    Journal of Nuclear Materials, 442, 181-189 (2013)
  • Effects of structure and interfaces on fracture toughness of CrN/AlN multilayer coatings
    Schlögl Manfred K.C.
    Scripta Materialia, 917-920 (2013)
  • Detailed modelling of delamination buckling of thin films under global tension
    Toth F. R.F.G.
    Acta Materialia, 2425-2433 (2013)
  • Fracture of ECAP-deformed iron and the role of extrinsic toughening mechanisms
    Hohenwarter Anton P.R.
    Acta Materialia, 2973-2983 (2013)
  • An elevated temperature study of a Ti adhesion layer on polyimide
    Taylor Aidan A. C.M.J.
    Thin Solid Films, 354-361 (2013)
  • A study into the crack propagation resistance of pure tungsten
    Gludovatz Bernd W.S.
    Engineering Fracture Mechanics, 76-85 (2013)
  • Influence of grain shape and orientation on the mechanical properties of high pressure torsion deformed nickel
    Rathmayr Georg B. P.R.
    Materials Science & Engineering A, 224-231 (2013)
  • Recent progress in research on tungsten materials for nuclear fusion applications in Europe
    Rieth M. D.S.L.
    Journal of Nuclear Materials, 432, 482-500 (2013)
  • Fatigue crack closure: From LCF to small scale yielding
    Pippan Reinhard G.W.
    International Journal of Fatigue, 41-48 (2013)
  • Insights into the atomic and electronic structure triggered by ordered nitrogen vacancies in CrN
    Zhang Zaoli L.H.
    Physical Review B, 014104-1-9 (2013)
  • Formation of nanostructure and abnormal annealing behavior of a Cu–Ag–Zr alloy processed by high-pressure torsion
    Tian Y.Z. F.J.
    Materials Science & Engineering A, 184-194 (2013)
  • Influence of AlN layers on mechanical properties and thermal stability of Cr-based nitride coatings
    Schlögl Manfred P.J.
    Thin Solid Films, 113-118 (2013)
  • Micro-Compression Test of Thixoformed Austenite
    Mašek Bohuslav A.D.
    Solid State Phenomena, 215-218 (2013)
  • Influence of bulk pre-straining on the size effect in nickel compression pillars
    Schneider A.S. K.D.
    Materials Science & Engineering A, 147-158 (2013)
  • Determining the fracture resistance of thin sheet fiber composites – Paper as a model material
    Zechner J., M. Janko, O. Kolednik
    Composites Science and Technology, 74, 43-51 (2013)
  • Nanodiffraction at MINAXS (P03) beamline of PETRA III
    Krywka C. K.J.
    Journal of Physics, 072021-4 (2013)

Master Thesis

Master Thesis

  • Nanoidentation response of single crystal cooperfilms on sapphire
    Sträußnigg J.
    (2019)
  • Effects of alloying and fluxing treatment on thermal, magnetic and structural properties of Fe-(Ni, Co)-P-C metallic glass ribbons
    Yüce E.
    (2019)
  • Comparative study on the miscibility of Cu-Fe-Co compounds processed by methods of severe deformation
    Kasalo M.
    (2019)
  • Deformation Mechanisms in Metallic Glasses: An Atomistic Study
    Moitzi F.
    (2019)
  • The role of adhesion layers on the interfacial reliability of multilayer insulators
    Paulitsch M.
    (2019)
  • Mechanical, Physical and Structural Investigation of Severe Plastically Deformed CuZr-Based Metallic Glasses
    Rezvan A.
    (2019)
  • Digitale Bildkorrelation anhand der magnetokalorischen LaFeSi-Legierung
    Philipp Kraker
    (2018)
  • Severe Plastic Deformation Behavior of CuAg Cast Alloys
    Zeiler S.
    (2018)
  • Thermo-mechanisches Verhalten von dünnen Mo-Ag Filmen
    Trost C.
    (2018)
  • Microstructural Evolution of Cu-Fe-Co and Ag-Fe-Co Composites Processed by High-Pressure Torsion
    Spuller M.
    (2018)
  • Influence of Annealing on the Magnetic Properties of HPT Deformed Soft Magnetic Materials
    Schaffar G.
    (2018)
  • Surface quality analysis of femto-second laser processed trenches
    Jelinek A.
    (2018)
  • Auf dem Weg zu strahlungsbeständigen Materialien: Evaluierung von Strahlungseffekten in grenzflächenreichem, nanostrukturiertem Cu-Fe-Ag
    Wurmshuber M.
    (2018)
  • Cross-sectional properties of carburized steel
    Ziegelwanger T.
    (2018)
  • Charakterisierung von neuen Schichtwerkstoffen auf Silizium mittels Nanoindentierung
    Kampichler J.
    (2017)
  • Thermisch aktivierte Verformungsmechanismen untersucht mittels Druckversuchen an ultrafeingekörnten raumzentrierten Vanadium
    Göbl M.
    (2017)
  • Fatigue Crack Growth Behavior of a Nanocrystalline Austenitic Steel
    Pillmeier S.
    (2017)
  • The influence of deformation and proton-irradiation on the mechanical behavior in naonocrystalline stainless steels
    Alfreider M.
    (2017)
  • Automated Image Processing for Residual Stress Measurements of Thin Films using MATLAB
    Wurmshuber M.
    (2017)
  • Micromechanical testing of wood samples: A new preparation route using femtosecond-pulsed laser ablation
    Jakob S.
    (2016)
  • Micromechanical Characterization of Self-Organized Ti1-xAIxN Nanolamellae: The Influence of Interface Coherency and Phase Alteration on Fracture Behaviour
    Meindlhumer M.
    (2016)
  • Fracture mechanisms of AISiCu casting alloys
    Papenberg N.
    (2015)
  • Tiefentemperatur-Nanoindentierung von einkristallinen Kupfer-Chrom und Wolfram
    Esterl R.
    (2015)
  • Hochtemperatur nanoindenting von ultrafeinkörnigem und einkristallinem Chrom und Tantal
    Pörnbacher J.
    (2015)
  • Texture evolution in nanocrystalline W-Cu composites
    Rodriguez Chavez A.
    (2015)
  • On the Anisotropy of Deformation in hexagonal Structures: A Microcompression Investigation of Single-Crystalline Magnesium
    Alfreider M.
    (2015)
  • Mechanische Eigenschaften hochverformter Titanlegierungen
    Jäger N.
    (2015)
  • Strukturuntersuchungen an einer High-Entropy Legierung
    B. Schuh
    (2014)
  • The influence of high current densities on intact and cracked thin gold films on flexible polyimide substrate
    B. Putz
    (2014)
  • Development of micrometer-sized specimen production processes for nonconductive materials
    G. Milassin
    (2014)
  • Role of microstructure on the electro-mechanical behaviour of copper films on polyimide
    J. Berger
    (2014)
  • Oxidstabilisierte nanokristalline Metalle
    R. Fritz
    Diplomarbeit, Montanuniversität Leoben, November 2006, None (2014)
  • Production and characterization of particle-stabilized nanocrystalline Cu for high temperature applications
    L. Krämer
    Diplomarbeit, Montanuniversität Leoben, November 2006, None (2014)
  • Atomic structure study on the CrN film and oxide interface
    Z. Gao
    Diplomarbeit, Bei Hang university, Beijing, P.R.China, 2013, None (2013)
  • High temperature mechanical testing of novel Cu-Nb nanocomposites
    M.M. Primorac
    (2013)
  • Auswirkung der Porenform und der Umformbedingungen auf das Porenschließverhalten
    K. Grundner
    (2013)
  • Fabrication and thermo-mechanical behavior of nanoporous copper
    M. Kreuzeder
    (2013)
  • Oxidation Behaviour of a Novel Nanolamellar Ti0.05Al0.95N Coating
    J. Todt
    , 35 (2013)
  • The influence of Hydrogen and Nitrogen impurities on the annealing behaviour of undoped silicon glass
    S.P. Bigl
    (2013)
  • Untersuchung von alternativen Legierungskonzepten für presshärtende Stähle
    E.C. Arnold
    (2013)

Other

Other

  • Phase Identification and Size Evaluation of Mechanically Alloyed Cu-Mg-Ni Powders
    Kursun C., M. Gogebakan, M.S. Khoshkhoo, J. Eckert
    In: Nanostructured Materials - Fabrication to Applications, Intech (2017, Ch.3)
  • High pressure torsion
    Pippan R. H.A.
    In: Rosochowski A., ed. Severe Plastic Deformation Technology, Whittles Publishing (2017, Chapter 4)
  • In Situ μLaue: Instrumental Setup for the Deformation of Micron Sized Samples
    Kirchlechner C., J. Keckes, J.S. Micha, G. Dehm
    In: Neutrons and Synchrotron Radiation in Engineering Materials Science: From Fundamentals to Applications:, Wiley (, 425-438)
  • In situ testing of flexible electronics: an alternative to AFM
    Cordill M.J., M. Fabich
    Electronic Engineering Times Europe, 36-37 (2015)
  • Load history effects on fatigue crack propagation: Its effect on the R-curve for threshold
    Zhou X., A. Hohenwarter, T. Leitner, H.P. Gänser, R. Pippan
    International Journal of the Italian Group of Fracture (2015)
  • Studying the Electro-Mechanical Behavior of Thin Films
    Cordill M.J., O. Glushko
    Olympus Application note (2015)
  • Methods to measure the adhesion of metal-polymer interfaces
    Cordill M.J.
    (2015)
  • Understanding nanoscale plasticity using quantitative in-situ TEM
    D. Kiener
    (2013)
  • Atomic-resolution electron microscopy - going beyond imaging
    Z. Zhang
    (2013)
  • Große Auszeichnung für Materialwissenschaftler
    R. Pippan
    Montanuniversität Leoben, ed., 1 (2013)
  • Reinhard Pippan erhält ERC Advanced Grant
    R. Pippan
    Österreichische Akademie der Wissenschaften, ed., 1 (2013)