PhD Thesis

  • Rissfortschritt in duktilen Stählen unter zyklischer Belastung: Einfluss des Herstellungsverfahrens und der Lastgeschichte. / Zhou, X.
    2015.
  • Recovery phenomena in severely deformed metals. / Renk, O.
    2015.
  • Characterization of crack growth with the configurational force concept. / Ochensberger, W.
    2015.
  • Combined atomic force and electron microscopy instrumentation to study microscale plasticity. / Kreith, J.
    2015.
  • TEM Investigations on Interactions of Dislocations with Boundaries. / Imrich, P. J.
    2015.

Conference Papers

  • Design of fracture resistant composites by utilizing spatial material property variations. / Sistaninia, M.; Kolednik, O.
    20th International Conference on Composite Materials (ICCM 20). Kopenhagen, 2015.
  • Physically correct assessment of fatigue crack growth in elastic–plastic materials with the J-integral. / Ochensberger, W.; Kolednik, O.
    15th International ASTM/ESIS Symposium on Fatigue and Fracture Mechanics (40th National Symposium on Fatigue and Fracture Mechanics. Anaheim, 2015.
  • Hardening by annealing: insights from different alloys. / Renk, O.; Hohenwarter, A.; Schuh, B. et al.
    36TH RISO INTERNATIONAL SYMPOSIUM ON MATERIALS SCIENCE. Riso, 2015.
  • Phase decomposition and nano structure evolution of metastable nanocrystalline Cu-Co solid solutions during thermal treatment. / Bachmaier, A.; Stolpe, M.; Müller, T. et al.
    36TH RISO INTERNATIONAL SYMPOSIUM ON MATERIALS SCIENCE. Riso, 2015.

Journal Articles

  • Magnetic compensation, field-dependent magnetization reversal, and complex magnetic ordering in Co2TiO4. / Nayak, S; Thota, S; Joshi, D et al.
    in: Physical Review B, Jahrgang 92, Nr. 21, 23.12.2015, S. ARTN 214434.
  • High-Temperature Characterization of Silicon Dioxide Films with Wafer Curvature. / Bigl, S.; Heinz, W.; Kahn, M. et al.
    in: JOM, Jahrgang 67, Nr. 12, 15.12.2015, S. 2902-2907.
  • Deformation Behavior and Microstructural Evolution of Cu-Ag Alloys Processed by High-Pressure Torsion. / Kormout, K. S.; Yang, B.; Pippan, R.
    in: Advanced Engineering Materials, Jahrgang 17, Nr. 12, 15.12.2015, S. 1828-1834.
  • Deformation-Induced Martensitic Transformation in Cu-Zr-Zn Bulk Metallic Glass Composites. / Wu, D; Song, K; Cao, C et al.
    in: Metals, Jahrgang 5, Nr. 4, 15.12.2015, S. 2134-2147.
  • Size Effects on Strength in the Transition from Single-to-Polycrystalline Behavior. / Ghosh, P.; Chokshi, A. H.
    in: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, Jahrgang 46A, Nr. 12, 15.12.2015, S. 5671-5684.
  • Hybrid nanostructured aluminum alloy with super-high strength. / Wang, Z; Qu, R; Scudino, S et al.
    in: NPG Asia Mater., Jahrgang 7, 15.12.2015, S. ARTN e229.
  • Microstructure characterization of Al-Cr-Fe quasicrystals sintered using spark plasma sintering. / Li, R. T.; Dong, Z. L.; Murugan, V. K. et al.
    in: Materials Characterization, Jahrgang 110, 15.12.2015, S. 264-271.
  • Thermally Activated Deformation Behavior of ufg-Au: Environmental Issues During Long-Term and High-Temperature Nanoindentation Testing. / Maier, V.; Leitner, A.; Pippan, R. et al.
    in: JOM, Jahrgang 67, Nr. 12, 15.12.2015, S. 2934-2944.
  • Dynamic nanoindentation testing for studying thermally activated processes from single to nanocrystalline metals. / Durst, K.; Maier, V.
    in: Current Opinion in Solid State and Materials Science, Nr. 6, 01.12.2015, S. 340-353.
  • In Situ Observations of Free-Standing Graphene-like Mono- and Bilayer ZnO Membranes. / Quang, H; Bachmatiuk, A; Dianat, A et al.
    in: ACS Nano, Jahrgang 9, Nr. 11, 15.11.2015, S. 11408-11413.
  • Imprinting bulk amorphous alloy at room temperature. / Kim, S; Park, E; Ott, R et al.
    in: Scientific Reports, Jahrgang 5, 13.11.2015, S. ARTN 16540.
  • Residual stress within nanoscale metallic multilayer systems during thermal cycling. / Economy, D. R.; Cordill, M. J.; Payzant, E. A. et al.
    in: Materials Science and Engineering: A, Jahrgang 648, 11.11.2015, S. 289-298.
  • Functionalizing Aluminum Oxide by Ag Dendrite Deposition at the Anode during Simultaneous Electrochemical Oxidation of Al. / Rafailović, Lidija D; Gammer, Christoph; Rentenberger, Christian et al.
    in: Advanced Materials, Jahrgang 27, Nr. 41, 04.11.2015, S. 6438-43.
  • In-Situ Measurements of Free-standing, Ultra-thin Film Cracking in Bending. / Hintsala, E.; Kiener, D.; Jackson, J. et al.
    in: Experimental Mechanics, Jahrgang 55, Nr. 9, 01.11.2015, S. 1681-1690.
  • Adhesion energy of printed circuit board materials using four-point-bending validated with finite element simulations. / Schöngrundner, R.; Cordill, M. J.; Maier, G. A. et al.
    in: Microelectronics Reliability, Nr. 55, 01.11.2015, S. 2382-2390.
  • Modeling of Fatigue Crack Growth: Dislocation Models. / Pippan, R.; Riemelmoser, F. O.
    in: Reference Module in Materials Science and Materials Engineering, 28.10.2015.
  • Effects of microstructure and crystallography on crack path and intrinsic resistance to shear-mode fatigue crack growth. Fracture and Structural Integrity. / Pokluda, J.; Vojtek, T.; Hohenwarter, A. et al.
    in: Fracture and Structural Integrity, Nr. 33, 01.10.2015, S. 142-149.
  • Ab initio studies on the adsorption and implantation of Al and Fe to nitride materials. / Riedl, H.; Zalesak, J.; Arndt, M. et al.
    in: Journal of Applied Physics, Jahrgang 118, Nr. 12, 28.09.2015, S. ARTN 125306.
  • Precipitation behavior of an ultra-fine grained Mg-Zn alloy processed by high-pressure torsion. / Meng, F.; Rosalie, J. M.; Singh, A. et al.
    in: Materials Science and Engineering: A, Jahrgang 644, 17.09.2015, S. 386-391.
  • Simulation of high pressure torsion tests of pearlitic steel. / Larijani, N.; Kammerhofer, C.; Ekh, M.
    in: Journal of Materials Processing Technology, Jahrgang 223, 15.09.2015, S. 337-343.
  • Thermally activated deformation processes in body-centered cubic Cr - How microstructure influences strain-rate sensitivity. / Maier, V.; Hohenwarter, A.; Pippan, R. et al.
    in: Scripta Materialia, Jahrgang 106, 15.09.2015, S. 42-45.
  • Nanocrystalline steel obtained by mechanical alloying of iron and graphite subsequently compacted by high-pressure torsion. / Borchers, C.; Garve, C.; Tiegel, M. et al.
    in: Acta Materialia, Jahrgang 97, 15.09.2015, S. 207-215.
  • Mechanical properties, microstructure and thermal stability of a nanocrystalline CoCrFeMnNi high-entropy alloy after severe plastic deformation. / Schuh, B.; Mendez-Martin, F.; Voelker, B. et al.
    in: Acta Materialia, Jahrgang 96, 01.09.2015, S. 258-268.
  • Thickness effect on the fracture and delamination of titanium films. / Cordill, M. J.; Taylor, A. A.
    in: Thin Solid Films, Jahrgang 589, 31.08.2015, S. 209-214.
  • Influence of inclined twin boundaries on the deformation behavior of Cu micropillars. / Imrich, P. J.; Kirchlechneriz, C.; Dehm, G.
    in: Materials Science and Engineering: A, Jahrgang 642, 26.08.2015, S. 65-70.
  • Revisiting fatigue crack growth in various grain size regimes of Ni. / Leitner, T.; Hohenwarter, A.; Pippan, R.
    in: Materials Science and Engineering: A, Jahrgang 646, 24.08.2015, S. 294-305.
  • Thermal expansion of rock-salt cubic AIN. / Bartosik, M.; Todt, M.; Holec, D. et al.
    in: Applied Physics Letters, Nr. 107-7, 17.08.2015, S. 071602.
  • In Situ TEM Microcompression of Single and Bicrystalline Samples: Insights and Limitations. / Imrich, P. J.; Kirchlechner, C.; Kiener, D. et al.
    in: JOM, Jahrgang 67, Nr. 8, 15.08.2015, S. 1704-1712.
  • Corrosion Fatigue of Austenitic Stianless Steel in Different Hot Chloride Solutions. / Visser, A.; Mori, G.; Panzenböck, M. et al.
    in: Corrosion Science and Technology, Jahrgang 14, Nr. 4, 01.08.2015, S. 172-176.
  • Carbon distribution in multi-phase gamma-TiAl based alloys and its influence on mechanical properties and phase formation. / Klein, T.; Schachermayer, M.; Mendez-Martin, F. et al.
    in: Acta Materialia, Jahrgang 94, 01.08.2015, S. 205-213.
  • On the reversibility of dislocation slip during small scale low cycle fatigue. / Kirchlechner, C.; Imrich, P. J.; Liegl, W. et al.
    in: Acta Materialia, Jahrgang 94, 01.08.2015, S. 69-77.
  • Mechanical property enhancement in laminates through control of morphology and crystal orientation. / Zeilinger, A.; Daniel, R.; Stefenelli, M. et al.
    in: Journal of Physics D: Applied Physics, Jahrgang 48, Nr. 29, 29.07.2015, S. ARTN 295303.
  • Analysis of fatigue crack propagation under mixed mode II plus III in ARMCO iron. / Vojtek, T.; Pokluda, J.; Sandera, P. et al.
    in: International Journal of Fatigue, Jahrgang 76, 15.07.2015, S. 47-52.
  • Microstructural evolution and grain refinement in an intermetallic titanium aluminide alloy with a high molybdenum content. / Rashkova, B.; Spiradek-Hahn, K.; Brabetz, M. et al.
    in: International Journal of Materials Research, Jahrgang 106, Nr. 7, 15.07.2015, S. 725-731.
  • Nitrogen atom shift and the structural change in chromium nitride. / Wan, P.; Zhang, Z. L.; Holec, D. et al.
    in: Acta Materialia, Jahrgang 98, 07.07.2015, S. 119-127.
  • Adhesion measurement of a buried Cr interlayer on polyimide. / Marx, V. M.; Kirchlechner, C.; Zizak, . et al.
    in: Philosophical Magazine, Jahrgang 95, Nr. 16-18, 23.06.2015, S. 1982-1991.
  • Microstructure-dependent deformation behaviour of bcc-metals - indentation size effect and strain rate sensitivity. / Maier, V.; Schunk, C.; Goeken, M. et al.
    in: Philosophical Magazine, Jahrgang 95, Nr. 16-18, 22.06.2015, S. 1766-1779.
  • Microstructure-controlled depth gradients of mechanical properties in thin nanocrystalline films: Towards structure-property gradient functionalization. / Daniel, R.; Zeilinger, A.; Schoeberl, T. et al.
    in: Journal of Applied Physics, Jahrgang 117, Nr. 23, 21.06.2015, S. ARTN 235301.
  • The peculiarity of the metal-ceramic interface. / Zhang, Z. L.; Long, Y.; Cazottes, S. et al.
    in: Scientific Reports, Jahrgang 5, 19.06.2015, S. ARTN 11460.
  • Production of Bulk Metallic Glasses by Severe Plastic Deformation. / Kraemer, L.; Kormout, K. S.; Setman, D. et al.
    in: Metals, Jahrgang 5, Nr. 2, 15.06.2015, S. 720-729.
  • Propagation of Long Fatigue Cracks under Remote Modes II and III in Ferritic-Pearlitic Steel. / Vojtek, T.; Pokluda, J.; Hohenwarter, A. et al.
    in: Acta Physica Polonica A, Jahrgang 128, Nr. 4, 15.06.2015, S. 611-614.
  • Improved electro-mechanical performance of gold films on polyimide without adhesion layers. / Putz, B.; Schoeppner, R. L.; Glushko, O. et al.
    in: Scripta Materialia, Jahrgang 102, 15.06.2015, S. 23-26.
  • Interface fracture and chemistry of a tungsten-based metallization on borophosphosilicate glass. / Völker, B.; Heinz, W.; Matoy, K. et al.
    in: Philosophical Magazine, Nr. 94, 01.06.2015, S. 1-15.
  • Mechanical and chemical investigation of the interface between tungsten-based metallizations and annealed borophosphosilicate glass. / Voelker, B.; Heinz, W.; Matoy, K. et al.
    in: Thin Solid Films, Jahrgang 583, 29.05.2015, S. 170-176.
  • Downscaling metal-dielectric interface fracture experiments to sub-micron dimensions: A feasibility study using TEM. / Voelker, B.; Heinz, W.; Roth, R. et al.
    in: Surface and Coatings Technology, Jahrgang 270, 25.05.2015, S. 1-7.
  • Small scale mechanical testing of irradiated materials. / Hosemann, P.; Shin, C.; Kiener, D.
    in: Journal of Materials Research, Jahrgang 30, Nr. 9, 14.05.2015, S. 1231-1245.
  • Microstructure and mechanical properties of CuxNb1-x alloys prepared by ball milling and high pressure torsion compacting. / Abad, M. D.; Parker, S.; Kiener, D. et al.
    in: Journal of Alloys and Compounds, Nr. 630, 05.05.2015, S. 117-125.
  • The influence of a brittle Cr interlayer on the deformation behavior of thin Cu films on flexible substrates: Experiment and model. / Marx, V. M.; Toth, F.; Wiesinger, A. et al.
    in: Acta Materialia, Jahrgang 89, 01.05.2015, S. 278-289.
  • Resolving depth evolution of microstructure and hardness in sputtered CrN film. / Zeilinger, A.; Daniel, R.; Schoeberl, T. et al.
    in: Thin Solid Films, Jahrgang 581, 30.04.2015, S. 75-79.
  • Following crack path selection in multifilm structures with weak and strong interfaces by in situ 4-point-bending. / Voelker, B.; Venkatesan, S.; Heinz, W. et al.
    in: Journal of Materials Research, Jahrgang 30, Nr. 8, 28.04.2015, S. 1090-1097.
  • Internal and external stresses: In situ TEM compression of Cu bicrystals containing a twin boundary. / Imrich, P. J.; Kirchlechner, C.; Kiener, D. et al.
    in: Scripta Materialia, Jahrgang 100, 15.04.2015, S. 94-97.
  • Ab initio description of segregation and cohesion of grain boundaries in W-25 at.% Re alloys. / Scheiber, D.; Razumovskiy, V. I.; Puschnig, P. et al.
    in: Acta Materialia, Jahrgang 88, 15.04.2015, S. 180-189.
  • Correlative characterization of primary Al-3(Sc,Zr) phase in an Al-Zn-Mg based alloy. / Li, J. H.; Wiessner, M.; Albu, M. et al.
    in: Materials Characterization, Jahrgang 102, 15.04.2015, S. 62-70.
  • Controllable synthesis of palladium nanocubes/reduced graphene oxide composites and their enhanced electrocatalytic performance. / Zhang, Y.; Huang, Q.; Chang, G. et al.
    in: Journal of Power Sources, Jahrgang 280, 15.04.2015, S. 422-429.
  • Measuring electro-mechanical properties of thin films on polymer substrates. / Cordill, M. J.; Glushko, O.; Kreith, J. et al.
    in: Microelectronic Engineering, Jahrgang 137, 02.04.2015, S. 96-100.
  • Fracture and fracture toughness of nanopolycrystalline metals produced by severe plastic deformation. / Hohenwarter, A.; Pippan, R.
    in: Philosophical transactions. Series A, Mathematical, physical, and engineering sciences, Jahrgang 373, Nr. 2038, 28.03.2015, S. ARTN 20140366.
  • Physically appropriate characterization of fatigue crack propagation rate in elastic-plastic materials using the -integral concept. / Ochensberger, W.; Kolednik, O.
    in: International Journal of Fracture, Jahrgang 192, Nr. 1, 15.03.2015, S. 25-45.
  • Microstructural thermal stability of CNT-reinforced composites processed by severe plastic deformation. / Suarez, S.; Lasserre, F.; Soldera, F. et al.
    in: Materials Science and Engineering: A, Jahrgang 626, 25.02.2015, S. 122-127.
  • Incremental high pressure torsion as a novel severe plastic deformation process: Processing features and application to copper. / Hohenwarter, A.
    in: Materials Science and Engineering: A, Jahrgang 626, 25.02.2015, S. 80-85.
  • X-ray nanodiffraction reveals stress distribution across an indented multilayered CrN-Cr thin film. / Stefanelli, M.; Daniel, R.; Ecker, W. et al.
    in: Acta Materialia, Nr. 85, 15.02.2015, S. 24-31.
  • Elevated temperature mechanical properties of novel ultra-fine grained Cu-Nb composites. / Primorac, M. M.; Abad, M. D.; Hosemann, P. et al.
    in: Materials Science and Engineering: A, Jahrgang 625, 11.02.2015, S. 296-302.
  • Increasing the strength of nanocrystalline steels by annealing: Is segregation necessary? / Renk, O.; Hohenwarter, A.; Eder, K. et al.
    in: Scripta Materialia, Jahrgang 95, 15.01.2015, S. 27-30.
  • Modified Kitagawa-Takahashi diagram accounting for finite notch depths. / Maierhofer, J.; Gaenser, H. -P.; Pippan, R.
    in: International Journal of Fatigue, Jahrgang 70, 15.01.2015, S. 503-509.
  • Cyclic bending experiments on free-standing Cu micron lines observed by electron backscatter diffraction. / Wimmer, A.; Heinz, W.; Detzel, T. et al.
    in: Acta Materialia, Jahrgang 83, 15.01.2015, S. 460-469.
  • Fabrication and thermo-mechanical behavior of ultra-fine porous copper. / Kreuzeder, M.; Abad, M.-D.; Primorac, M.-M. et al.
    in: Journal of Materials Science, Nr. 50, 15.01.2015, S. 634-643.
  • Copper diffusion into single-crystalline TiN studied by transmission electron microscopy and atom probe tomography. / Muehlbacher, M.; Mendez-Martin, F.; Sartory, B. et al.
    in: Thin Solid Films, Jahrgang 574, 01.01.2015, S. 103-109.
  • Mechanical and structural investigation of porous bulk metallic glasses. / Sarac, Baran; Sopu, Daniel; Park, Eunmi et al.
    in: Metals, 2015.

Master Thesis

  • Hochtemperatur nanoindenting von ultrafeinkörnigem und einkristallinem Chrom und Tantal. / Pörnbacher, J.
    2015.
  • Fracture mechanisms of AISiCu casting alloys. / Papenberg, N.
    2015.
  • Tiefentemperatur-Nanoindentierung von einkristallinen Kupfer-Chrom und Wolfram. / Esterl, R.
    2015.
  • Texture evolution in nanocrystalline W-Cu composites. / Rodriguez Chavez, A.
    2015.
  • On the Anisotropy of Deformation in hexagonal Structures: A Microcompression Investigation of Single-Crystalline Magnesium. / Alfreider, M.
    2015.
  • Mechanische Eigenschaften hochverformter Titanlegierungen. / Jäger, N.
    2015.

Other

  • In situ testing of flexible electronics: an alternative to AFM. / Cordill, M. J.; Fabich, M.
    2015.
  • Load history effects on fatigue crack propagation: Its effect on the R-curve for threshold. / Zhou, X.; Hohenwarter, A.; Leitner, T. et al.
    33 Aufl. 2015.
  • Studying the Electro-Mechanical Behavior of Thin Films. / Cordill, M. J.; Glushko, O.
    2015.
  • Methods to measure the adhesion of metal-polymer interfaces. / Cordill, M. J.
    2015.