PhD Thesis

  • Deformation-induced supersaturation of immiscible binary systems. / Kormout, Karoline.
    2016.
  • Combcrack Generation in PVD Coated Hardmetal Milling Inserts. / Teppernegg, Tamara.
    2016.
  • Nanoscale Investigations of Performance-critical Regions in Non-homogeneous Metallic and Ceramic Thin Films. / Todt, Juraj.
    2016.
  • Bruchverhalten von Fe - Si - Al Stählen. / Umgeher, Andreas.
    2016.

Conference Papers

  • Experimental evidence of a common local mode II growth mechanism of fatigue cracks loaded in modes II, III and II plus III in niobium and titanium. / Vojtek, T; Hohenwarter, A; Pippan, R et al.
    Int. J. Fatigue. Band 92 2016. S. 470-477.
  • Investigation of Ni-B Alloys for Joining of TiB2 Ultra-High-Temperature Ceramic. / Xi, L; Kaban, I; Nowak, R et al.
    J. Mater. Eng. Perform.. Band 25 8. Aufl. 2016. S. 3204-3210.
  • Tailoring the mechanical and magnetic properties of nanocrystalline materials by decomposition of metastable solid solutions. / Bachmaier, A; Schmauch, J; Aboulfadl, H et al.
    N/A. 2016.
  • Auger and X-ray photoelectron spectroscopy on lithiated HOPG. / Hoffmann, M; Oswald, S; Zier, M et al.
    Surf. Interface Anal.. Band 48 7. Aufl. 2016. S. 501-504.
  • Determination of crack initiation and crack growth stress-life curves by fracture mechanics experiments and statistical analysis. / Kolitsch, S; Gänser, H; Pippan, R.
    ECF21. Cantania, 2016. S. 3026-3039.
  • Fracture and Material Behavior of Thin Film Composites. / Kozic, D; Treml, R; Maier-Kiener, V et al.
    N/A. 2016.
  • Fabrication of Cu-Al-Ni-Mn Shape-Memory Parts by Selective Laser Melting. / Gustmann, T; Neves, A; Kühn, U et al.
    DDMC2016. Berlin, 2016.
  • Recent advances in research in severe plastic deformation in Leoben. / Pippan, R; Hohenwarter, A; Renk, O et al.
    Giant Straining Process for Advanced Materials 2015. 2016.

Journal Articles

  • Correlative microstructure and topography informed nanoindentation of copper films. / Bigl, S; Schöberl, T; Wurster, S et al.
    in: Surface and Coatings Technology, Nr. 308, 25.12.2016, S. 404-413.
  • Effect of Alloying Elements in Melt Spun Mg-alloys for Hydrogen Storage. / Rozenberg, S; Saporiti, F; Lang, J et al.
    in: Mater. Res.-Ibero-am. J. Mater., Jahrgang 19, 15.12.2016, S. 20-26.
  • Substitution effect on glass formation of NixCo60-xNb40 alloys. / Ye, S; Zhang, S; Eckert, J et al.
    in: Materials Letters, Jahrgang 185, 15.12.2016, S. 541-544.
  • Compression behavior of inter-particle regions in high-strength Al84Ni7Gd6Co3 alloy. / Wang, Z; Qu, R; Prashanth, K et al.
    in: Materials Letters, Jahrgang 185, 15.12.2016, S. 25-28.
  • Ab initio search for cohesion-enhancing impurity elements at grain boundaries in molybdenum and tungsten. / Scheiber, D; Pippan, R; Puschnig, P et al.
    in: Modelling and Simulation in Materials Science and Engineering, Jahrgang 24, Nr. 8, 15.12.2016, S. ARTN 085009.
  • Advanced 3D failure characterization in multi-layered PCBs. / Gruenwald, E; Hammer, R; Rosc, J et al.
    in: NDT and E International, Jahrgang 84, 15.12.2016, S. 99-107.
  • Strain-induced phase transformation of a thin Co film on flexible substrates. / Marx, V; Kirchlechner, C; Breitbach, B et al.
    in: Acta Materialia, Jahrgang 121, 15.12.2016, S. 227-233.
  • Effect of high pressure solidification on tensile properties and strengthening mechanisms of Al-20Si. / Ma, P; Wei, Z; Jia, Y et al.
    in: Journal of Alloys and Compounds, Jahrgang 688, 15.12.2016, S. 88-93.
  • Thermal shock resistance of magnesia spinel refractories-Investigation with the concept of configurational forces. / Gruber, D; Sistaninia, M; Fasching, C et al.
    in: Journal of the European Ceramic Society, Jahrgang 36, Nr. 16, 15.12.2016, S. 4301-4308.
  • Negentropic stabilization of metastable beta-Ti in bulk metallic glass composites. / Zhang, L; Zhang, H; Li, W et al.
    in: Scripta Materialia, Jahrgang 125, 15.12.2016, S. 19-23.
  • Tensile Properties of Al-12Si Fabricated via Selective Laser Melting (SLM) at Different Temperatures. / Prashanth, K; Scudino, S; Eckert, J.
    in: Technologies, Jahrgang 38, Nr. 4, 02.12.2016, S. 1-9.
  • Improved fracture behavior and microstructural characterization of thin tungsten foils. / Nikolic, V; Wurster, S; Firneis, D et al.
    in: Nuclear Materials and Energy, Jahrgang 9, 01.12.2016, S. 181-188.
  • Combinatorial refinement of thin-film microstructure, properties and process conditions: iterative nanoscale search for self-assembled TiAlN nanolamellae. / Zalesak, J; Todt, J; Pitonak, R et al.
    in: Journal of Applied Crystallography, Jahrgang 6, Nr. 49, 01.12.2016.
  • High-resolution transmission electron microscopy investigation of diffusion in metallic glass multilayer films. / Ketov, S; Ivanov, Y; Sopu, D et al.
    in: Materials Today Advances, Jahrgang 1, 24.11.2016, S. 100004.
  • Effect of Particle Size on Microstructure and Mechanical Properties of Al-Based Composite Reinforced with 10 Vol.% Mechanically Alloyed Mg-7.4%Al Particles. / Chaubey, A; Prashanth, K; Wang, Z et al.
    in: Technologies, Jahrgang 4, Nr. 37, 19.11.2016, S. 1-8.
  • Integrated experimental and computational approach for residual stress investigation near through-silicon vias. / Deluca, M; Hammer, R; Keckes, J et al.
    in: Journal of Applied Physics, Jahrgang 120, 18.11.2016, S. 1-9.
  • Ab-initio search for cohesion-enhancing solute elements at grain boundaries in molybdenum and tungsten. / Scheiber, D; Pippan, R; Puschnig, P et al.
    in: International Journal of Refractory Metals and Hard Materials, Jahrgang 60, 15.11.2016, S. 75-81.
  • Interfacial segregation induced by severe plastic deformation in a Mg-Zn-Y alloy. / Basha, D; Sahara, R; Somekawa, H et al.
    in: Scripta Materialia, Jahrgang 124, 15.11.2016, S. 169-173.
  • Advanced tungsten materials for plasma-facing components of DEMO and fusion power plants. / Neu, R; Riesch, J; Coenen, J et al.
    in: Fusion Engineering and Design, Jahrgang 109, 01.11.2016, S. 1046-1052.
  • Crossover between superconductivity and magnetism in SrRuO3 mesocrystal embedded YBa2Cu3O7-x heterostructures. / Suresh, V; Lin, J; Liu, H et al.
    in: Nanoscale, Jahrgang 8, Nr. 43, 18.10.2016, S. 18454-18460.
  • Microstructure and thermal conductivity of hypereutectic Al-high Si produced by casting and spray deposition. / Jia, Y; Cao, F; Ma, P et al.
    in: Journal of Materials Research, Jahrgang 31, Nr. 19, 15.10.2016, S. 2948-2955.
  • High pressure die casting of Fe-based metallic glass. / Ramasamy, P; Szabo, A; Borzel, S et al.
    in: Scientific Reports, Jahrgang 6, 11.10.2016, S. ARTN 35258.
  • Compositional depth profiling of diamond-like carbon layers by glow discharge optical emission spectroscopy. / Schubert, C; Hoffmann, V; Kuemmel, A et al.
    in: Journal of Analytical Atomic Spectrometry, Jahrgang 31, Nr. 11, 06.10.2016, S. 2207-2212.
  • Mechanical and Corrosion Behavior of New Generation Ti-45Nb Porous Alloys Implant Dev. / Prashanth, K; Zhuravleva, K; Okulov, I et al.
    in: Technologies, Jahrgang 4, Nr. 33, 30.09.2016, S. 1-12.
  • Mechanical and Corrosion Behavior of New Generation Ti-45Nb Porous Alloys Implant Dev. / Prashanth, K; Zhuravleva, K; Okulov, I et al.
    in: Technologies, Jahrgang 4, Nr. 33, 30.09.2016, S. 1-12.
  • Correlation between structural heterogeneity and plastic deformation for phase separating FeCu metallic glasses. / Peng, C; Song, K; Wang, L et al.
    in: Scientific Reports, Jahrgang 6, 29.09.2016, S. ARTN 34340.
  • Strong and Stable Nanocomposites Prepared by High-Pressure Torsion of Cu-Coated Fe Powders. / Mueller, T; Bachmaier, A; Neubauer, E et al.
    in: Metals, Jahrgang 6, Nr. 10, 22.09.2016, S. ARTN 228.
  • Mechanochemical route to the synthesis of nanostructured Aluminium nitride. / Rounaghi, S; Eshghi, H; Scudino, S et al.
    in: Scientific Reports, Jahrgang 6, 21.09.2016, S. ARTN 33375.
  • Formation and phase evolution of liquid phase-separated metallic glasses with double glass transition, crystallization and melting. / Qin, Y; Shi, Y; Han, X et al.
    in: Materials Today Communications, Jahrgang 8, 15.09.2016, S. 64-71.
  • Influence of Ag and Co additions on glass-forming ability, thermal and mechanical properties of Cu-Zr-Al bulk metallic glasses. / Escher, B; Kuehn, U; Eckert, J et al.
    in: Materials Science and Engineering: A, Jahrgang 673, 15.09.2016, S. 90-98.
  • Effect of cerium addition on microstructure and mechanical properties of high-strength Fe85Cr4Mo8V2C1 cast steel. / Hufenbach, J; Helth, A; Lee, M et al.
    in: Materials Science and Engineering: A, Jahrgang 674, 15.09.2016, S. 366-374.
  • Hierarchically nanostructured hollow carbon nanospheres for ultra-fast and long-life energy storage. / Klose, M; Reinhold, R; Pinkert, K et al.
    in: Carbon, Jahrgang 106, 15.09.2016, S. 306-313.
  • Ultra-strong and damage tolerant metallic bulk materials: A lesson from nanostructured pearlitic steel wires. / Hohenwarter, A; Voelker, B; Kapp, M et al.
    in: Scientific Reports, Jahrgang 6, 14.09.2016, S. ARTN 33228.
  • Interface dominated mechanical properties of ultra-fine grained and nanoporous Au at elevated temperatures. / Leitner, A; Maier-Kiener, V; Joeng, J et al.
    in: Acta Materialia, Jahrgang 121, 13.09.2016, S. 104-116.
  • Alloying Behavior of Self-Assembled Noble Metal Nanoparticles. / Kuehn, L; Hermann, A; Rutkowski, B et al.
    in: Chemistry - A European Journal, Jahrgang 22, Nr. 38, 12.09.2016, S. 13446-+.
  • Microstructure and mechanical properties of the near-beta titanium alloy Ti-5553 processed by selective laser melting. / Schwab, H; Palm, F; Kuehn, U et al.
    in: MATERIALS & DESIGN, Jahrgang 105, 05.09.2016, S. 75-80.
  • Influence of ejection temperature on structure and glass transition behavior for Zr-based rapidly quenched disordered alloys. / Wang, X; Inoue, A; Kong, F et al.
    in: Acta Materialia, Jahrgang 116, 01.09.2016, S. 370-381.
  • Effect of Cu and Gd on Structural and Magnetic Properties of Fe-Co-B-Si-Nb Metallic Glasses. / Ramasamy, P; Stoica, M; Calin, M et al.
    in: Solid State Phenomena, Jahrgang 254, 30.08.2016, S. 60-64.
  • The effect of size on the strength of FCC metals at elevated temperatures: annealed copper. / Wheeler, J; Kirchlechner, C; Micha, J et al.
    in: Philosophical Magazine, Nr. 96, 30.08.2016, S. 3379-3395.
  • Ideal shear banding in metallic glass. / Wang, J; Ke, H; Pan, Y et al.
    in: Philosophical Magazine, Jahrgang 96, Nr. 30, 22.08.2016, S. 3159-3176.
  • Local and transient nanoscale strain mapping during in situ deformation. / Gammer, C; Kacher, J; Czarnik, C et al.
    in: Applied Physics Letters, Jahrgang 109, Nr. 8, 22.08.2016, S. ARTN 081906.
  • On the process of co-deformation and phase dissolution in a hard-soft immiscible Cu-Co alloy system during high-pressure torsion deformation. / Bachmaier, A; Schmauch, J; Aboulfadl, H et al.
    in: Acta Materialia, Jahrgang 115, 15.08.2016, S. 333-346.
  • Simultaneous enhancements of strength and toughness in an Al-12Si alloy synthesized using selective laser melting. / Suryawanshi, J; Prashanth, K; Scudino, S et al.
    in: Acta Materialia, Jahrgang 115, 15.08.2016, S. 285-294.
  • Ductilisation of tungsten (W) through cold-rolling: R-curve behaviour. / Reiser, J; Wurster, S; Hoffmann, J et al.
    in: International Journal of Refractory Metals and Hard Materials, Jahrgang 58, 15.08.2016, S. 22-33.
  • Progress in understanding of intrinsic resistance to shear-mode fatigue crack growth in metallic materials. / Vojtek, T; Pokluda, J; Hohenwarter, A et al.
    in: International Journal of Fatigue, Jahrgang 89, 15.08.2016, S. 36-42.
  • The effect of single overloads in tension and compression on the fatigue crack propagation behaviour of short cracks. / Zhou, X; Gaenser, H; Pippan, R.
    in: International Journal of Fatigue, Jahrgang 89, 15.08.2016, S. 77-86.
  • Fracture toughness enhancement of brittle nanostructured materials by spatial heterogeneity: A micromechanical proof for CrN/Cr and TiN/SiOx multilayers. / Daniel, R; Meindlhumer, M; Zalesak, J et al.
    in: MATERIALS & DESIGN, Jahrgang 104, 15.08.2016, S. 227-234.
  • Synthesis and Mechanical Characterisation of an Ultra-Fine Grained Ti-Mg Composite. / Alfreider, M; Jeong, J; Esterl, R et al.
    in: Materials, Jahrgang 9, Nr. 8, 11.08.2016, S. 688.
  • Interplay between sample size and grain size: Single crystalline vs. ultrafine-grained chromium micropillars. / Fritz, R; Maier-Kiener, V; Lutz, D et al.
    in: Materials Science and Engineering: A, Jahrgang 674, 05.08.2016, S. 626-633.
  • A comparative study on the isochronal and isothermal crystallization kinetics of Co46.45Fe25.55Ta8B20 soft magnetic metallic glass with high thermal stability. / Taghvaei, A; Eckert, J.
    in: Journal of Alloys and Compounds, Jahrgang 675, 05.08.2016, S. 223-230.
  • Structural evolution and strength change of a metallic glass at different temperatures. / Tong, X; Wang, G; Stachurski, Z et al.
    in: Scientific Reports, Jahrgang 6, 03.08.2016, S. ARTN 30876.
  • Advanced characterisation of thermo-mechanical fatigue mechanisms of different copper film systems for wafer metallizations. / Bigl, S; Wurster, S; Cordill, M et al.
    in: Thin Solid Films, Jahrgang 612, 01.08.2016, S. 153-164.
  • Interplay of the Open Circuit Potential-Relaxation and the Dissolution Behavior of a Single H-2 Bubble Generated at a Pt Microelectrode. / Karnbach, F; Yang, X; Mutschke, G et al.
    in: Journal of Physical Chemistry C, Jahrgang 120, Nr. 28, 21.07.2016, S. 15137-15146.
  • Layered-to-Tunnel Structure Transformation and Oxygen Redox Chemistry in LiRhO2 upon Li Extraction and Insertion. / Mikhailova, D; Karakulina, Ol; Batuk, D et al.
    in: Inorganic Chemistry, Jahrgang 55, Nr. 14, 18.07.2016, S. 7079-7089.
  • High-Performance Small-Amount Fe2O3-Doped (K,Na) NbO3-Based Lead-Free Piezoceramics with Irregular Phase Evolution. / Guo, J; Xu, F; Shang, X et al.
    in: Journal of the American Ceramic Society, Jahrgang 99, Nr. 7, 15.07.2016, S. 2341-2346.
  • Brittle-to-Ductile Transition in Metallic Glass Nanowires. / Sopu, D; Foroughi, A; Stoica, M et al.
    in: Nano Letters, Jahrgang 16, Nr. 7, 15.07.2016, S. 4467-4471.
  • Direct measurement of vacancy relaxation by dilatometry. / Kotzurek, J; Steyskal, E; Oberdorfer, B et al.
    in: Applied Physics Letters, Jahrgang 109, Nr. 2, 11.07.2016, S. ARTN 021906.
  • High-Performance Small-Amount Fe2O3-Doped (K,Na)NbO3-Based Lead-Free Piezoceramics with Irregular Phase Evolution. / Guo, J; Xu, F; Shang, X et al.
    in: Journal of the American Ceramic Society, Jahrgang 99, Nr. 7, 02.07.2016, S. 2341-2346.
  • Analysis of the thermal and temporal stability of Ta and Ti thin films onto SAW–substrate materials (LiNbO3 and LiTaO3) using AR-XPS. / Vogl, U; Gemming, T; Eckert, J et al.
    in: Surface and Interface Analysis, Jahrgang 48, Nr. 7, 27.06.2016, S. 570-574.
  • Transformation-mediated plasticity in CuZr based metallic glass composites: A quantitative mechanistic understanding. / Sun, B; Song, K; Pauly, S et al.
    in: International Journal of Plasticity, Jahrgang 85, 21.06.2016, S. 34-51.
  • The importance of fracture toughness in ultrafine and nanocrystalline bulk materials. / Pippan, R; Hohenwarter, A.
    in: Materials Research Letters, Jahrgang 4, Nr. 3, 15.06.2016, S. 127-136.
  • Tailoring the Bain strain of martensitic transformations in Ti-Nb alloys by controlling the Nb content. / Boenisch, M; Waltz, T; Calin, M et al.
    in: International Journal of Plasticity, Jahrgang 85, 15.06.2016, S. 190-202.
  • Synergistically Enhanced Polysulfide Chemisorption Using a Flexible Hybrid Separator with N and S Dual-Doped Mesoporous Carbon Coating for Advanced Lithium-Sulfur Batteries. / Balach, J; Singh, H; Gomoll, S et al.
    in: ACS Applied Materials and Interfaces, Jahrgang 8, Nr. 23, 15.06.2016, S. 14586-14595.
  • High Area Capacity Lithium-Sulfur Full-cell Battery with Prelitiathed Silicon Nanowire-Carbon Anodes for Long Cycling Stability. / Krause, A; Doerfler, S; Piwko, M et al.
    in: Scientific Reports, Jahrgang 6, 15.06.2016, S. ARTN 27982.
  • Enhanced polysulphide redox reaction using a RuO2 nanoparticle-decorated mesoporous carbon as functional separator coating for advanced lithium-sulphur batteries. / Balach, J; Jaumann, T; Muehlenhoff, S et al.
    in: Chemical Communications, Jahrgang 52, Nr. 52, 15.06.2016, S. 8134-8137.
  • Effect of Microstructure on the Electro-Mechanical Behaviour of Cu Films on Polyimide. / Berger, J; Glushko, O; Marx, V et al.
    in: JOM, Jahrgang 68, Nr. 6, 15.06.2016, S. 1640-1646.
  • Ion milling-induced micrometer-sized heterogeneities and partial crystallization in a TiZrCuFeBe bulk metallic glass. / Zhang, L; Pauly, S; Zhu, Z et al.
    in: Intermetallics, Jahrgang 73, 15.06.2016, S. 5-11.
  • Microstructure study of a severely plastically deformed Mg-Zn-Y alloy by application of low angle annular dark field diffraction contrast imaging. / Basha, D; Rosalie, J; Somekawa, H et al.
    in: Science and Technology of Advanced Materials, Jahrgang 17, Nr. 1, 15.06.2016, S. 115-127.
  • Electromigration in Gold Films on Flexible Polyimide Substrates as a Self-healing Mechanism. / Putz, B; Glushko, O; Cordill, M.
    in: Materials Research Letters, Jahrgang 4, Nr. 1, 15.06.2016, S. 43-47.
  • The mechanics of tessellations - bioinspired strategies for fracture resistance. / Fratzl, P; Kolednik, O; Fischer, F et al.
    in: Chemical Society Reviews, Jahrgang 45, Nr. 2, 15.06.2016, S. 252-267.
  • Towards the Better: Intrinsic Property Amelioration in Bulk Metallic Glasses. / Sarac, B; Zhang, L; Kosiba, K et al.
    in: Scientific Reports, Jahrgang 6, 08.06.2016, S. ARTN 27271.
  • Cross-sectional stress distribution in AlxGa1-xN heterostructure on Si(111) substrate characterized by ion beam layer removal method and precession electron diffraction. / Reisinger, M; Zalesak, J; Daniel, R et al.
    in: Materials and Design, Jahrgang 106, 02.06.2016, S. 476-481.
  • Mapping of residual strains around a shear band in bulk metallic glass by nanobeam X-ray diffraction. / Shahabi, H; Scudino, S; Kaban, I et al.
    in: Acta Materialia, Jahrgang 111, 01.06.2016, S. 187-193.
  • Electrochemical deposition of hydroxyapatite on beta-Ti-40Nb. / Schmidt, R; Hoffmann, V; Helth, A et al.
    in: Surface and Coatings Technology, Jahrgang 294, 25.05.2016, S. 186-193.
  • Local microstructure evolution at shear bands in metallic glasses with nanoscale phase separation. / He, J; Kaban, I; Mattern, N et al.
    in: Scientific Reports, Jahrgang 6, 16.05.2016, S. ARTN 25832.
  • FIB-induced dislocations in Al submicron pillars: Annihilation by thermal annealing and effects on deformation behavior. / Lee, S; Jeong, J; Kim, Y et al.
    in: Acta Materialia, Jahrgang 110, 15.05.2016, S. 283-294.
  • Damage tolerance of railway axles - The issue of transferability revisited. / Gaenser, H; Maierhofer, J; Tichy, R et al.
    in: International Journal of Fatigue, Jahrgang 86, 15.05.2016, S. 52-57.
  • Thermal oxidation behavior of glass-forming Ti-Zr-(Nb)-Si alloys. / Abdi, S; Boenisch, M; Oswald, Steffen et al.
    in: Journal of Materials Research, Jahrgang 31, Nr. 9, 14.05.2016, S. 1264-1274.
  • Processing, microstructure and mechanical properties of Al-based metal matrix composites reinforced with mechanically alloyed particles. / Chaubey, A; Scudino, S; Mukhopadhyay, N et al.
    in: Journal of Materials Research, Jahrgang 31, Nr. 9, 14.05.2016, S. 1229-1236.
  • Deformation in the γ-Mg17Al12 phase at 25–278 °C. / Mathur, H; Maier-Kiener, V; Korte-Kerzel, S.
    in: Acta Materialia, Jahrgang 113, 13.05.2016, S. 221-229.
  • The electro-mechanical behavior of sputter-deposited Mo thin films on flexible substrates. / Joerg, T; Cordill, M; Franz, R et al.
    in: Thin Solid Films, Jahrgang 606, 01.05.2016, S. 45-50.
  • Giant heterogeneous magnetostriction in Fe-Ga alloys: Effect of trace element doping. / He, Y; Jiang, C; Wu, W et al.
    in: Acta Materialia, Jahrgang 109, 01.05.2016, S. 177-186.
  • Relationship between mechanical damage and electrical degradation in polymer-supported metal films subjected to cyclic loading. / Glushko, O; Klug, A; List-Kratochvil, E et al.
    in: Materials Science and Engineering: A, Jahrgang 662, 26.04.2016, S. 157-161.
  • Orientation of FePt nanoparticles on top of a-SiO2/Si(001), MgO(001) and sapphire(0001): effect of thermal treatments and influence of substrate and particle size. / Schilling, M; Ziemann, P; Zhang, Z et al.
    in: Beilstein J. Nanotechnol., Nr. 7, 21.04.2016, S. 591–604.
  • Orientation of FePt nanoparticles on top of a-SiO2/Si(001), MgO(001) and sapphire(0001): effect of thermal treatments and influence of substrate and particle size. / Schilling, M; Ziemann, P; Zhang, Z et al.
    in: Beilstein J. Nanotechnol., Jahrgang 7, 21.04.2016, S. 591-604.
  • Real Hydrostatic Pressure in High-Pressure Torsion Measured by Bismuth Phase Transformations and FEM Simulations. / Edalati, K; Lee, D; Nagaoka, T et al.
    in: Materials Transactions, Jahrgang 57, Nr. 4, 15.04.2016, S. 533-538.
  • Al-rich cubic Al0.8Ti0.2N coating with self-organized nano-lamellar microstructure: Thermal and mechanical properties. / Todt, J; Zalesak, J; Daniel, R et al.
    in: Surface and Coatings Technology, Jahrgang 271, 15.04.2016, S. 89-93.
  • Laser surface remelting of a Cu-Al-Ni-Mn shape memory alloy. / da Silva; Gargarella, P; Gustmann, T et al.
    in: Materials Science and Engineering: A, Jahrgang 661, 15.04.2016, S. 61-67.
  • High temperature mechanical properties of WC-Co hard metals. / Teppernegg, T; Kluensner, T; Kremsner, C et al.
    in: International Journal of Refractory Metals and Hard Materials, Jahrgang 56, 15.04.2016, S. 139-144.
  • Glass-forming ability, thermal stability of B2 CuZr phase, and crystallization kinetics for rapidly solidified Cu-Zr-Zn alloys. / Wu, D; Song, K; Gargarella, P et al.
    in: Journal of Alloys and Compounds, Jahrgang 664, 15.04.2016, S. 99-108.
  • Influence of processing parameters on the fabrication of a Cu-Al-Ni-Mn shape-memory alloy by selective laser melting. / Gustmann, T; Neves, A; Kühn, U et al.
    in: Additive Manufacturing, Jahrgang 11, 14.04.2016, S. 23-31.
  • Improving the glass-forming ability and plasticity of a TiCu-based bulk metallic glass composite by minor additions of Si. / Gargarella, P; Pauly, S; Khoshkhoo, M et al.
    in: Journal of Alloys and Compounds, Jahrgang 663, 05.04.2016, S. 531-539.
  • A study of the micro- and nanoscale deformation behavior of individual austenitic dendrites in a FeCrMoVC cast alloy using micro- and nanoindentation experiments. / Zeisig, J; Hufenbach, J; Wendrock, H et al.
    in: Applied Physics Letters, Jahrgang 108, Nr. 14, 04.04.2016, S. ARTN 143103.
  • Reconfiguration of lithium sulphur batteries: "Enhancement of Li-S cell performance by employing a highly porous conductive separator coating". / Stoeck, U; Balach, J; Klose, M et al.
    in: Journal of Power Sources, Jahrgang 309, 31.03.2016, S. 76-81.
  • Anisotropic deformation characteristics of an ultrafine- and nanolamellar pearlitic steel. / Kapp, M; Hohenwarter, A; Wurster, S et al.
    in: Acta Materialia, Jahrgang 106, 15.03.2016, S. 239-248.
  • Manipulation of free volumes in a metallic glass through Xe-ion irradiation. / Bian, X; Wang, G; Chen, H et al.
    in: Acta Materialia, Jahrgang 106, 15.03.2016, S. 66-77.
  • Structure-property relationships in nanoporous metallic glasses. / Sopu, D; Soyarslan, C; Sarac, B et al.
    in: Acta Materialia, Jahrgang 106, 15.03.2016, S. 199-207.
  • About the fatigue crack propagation threshold of metals as a design criterion - A review. / Zerbst, U; Vormwald, M; Pippan, R et al.
    in: Engineering Fracture Mechanics, Jahrgang 153, 15.03.2016, S. 190-243.
  • Low Young's modulus Ti-based porous bulk glassy alloy without cytotoxic elements. / Nicoara, M; Raduta, A; Parthiban, R et al.
    in: Acta Biomaterialia, Jahrgang 36, 12.03.2016, S. 232-331.
  • Anodically fabricated TiO2–SnO2 nanotubes and their application in lithium ion batteries. / Madian, M; Klose, M; Jaumann, T et al.
    in: Journal of Materials Chemistry A, Jahrgang 4, 09.03.2016, S. 5542-5552.
  • Ab initio calculations of grain boundaries in bcc metals. / Scheiber, D; Pippan, R; Puschnig, P et al.
    in: Modelling and Simulation in Materials Science and Engineering, Jahrgang 24, Nr. 3, 08.03.2016, S. ARTN 035013.
  • In-situ Quasi-Instantaneous e-beam Driven Catalyst-Free Formation Of Crystalline Aluminum Borate Nanowires. / Gonzalez-Martinez, I; Gemming, T; Mendes, R et al.
    in: Scientific Reports, Jahrgang 6, 03.03.2016, S. ARTN 22524.
  • Wettability and work of adhesion of liquid sulfur on carbon materials for electrical energy storage applications. / Kaban, I; Nowak, R; Bruzda, G et al.
    in: Carbon, Jahrgang 98, 01.03.2016, S. 702-707.
  • Improvement of fatigue life by compliant and soft interlayers. / Kolednik, O; Zechner, J; Predan, J.
    in: Scripta Materialia, Jahrgang 113, 01.03.2016, S. 1-5.
  • Electro-Mechanical Testing of Conductive Materials Used in Flexible Electronics. / Cordill, M; Glushko, O; Putz, B.
    in: Frontiers in Materials, Jahrgang 3, 22.02.2016, S. UNSP 11.
  • Kinetic analysis of the non-isothermal crystallization process, magnetic and mechanical properties of FeCoBSiNb and FeCoBSiNbCu bulk metallic glasses. / Ramasamy, P; Stoica, M; Taghvaei, A et al.
    in: Journal of Applied Physics, Jahrgang 119, Nr. 7, 21.02.2016, S. ARTN 073908.
  • Review on manufacture by selective laser melting and properties of titanium based materials for biomedical applications. / Zhang, L; Attar, H; Calin, M et al.
    in: Materials Technology, Jahrgang 31, Nr. 2, 17.02.2016, S. 66-76.
  • Ti/Al Multi-Layered Sheets: Differential Speed Rolling (Part B). / Romberg, J; Freudenberger, J; Watanabe, H et al.
    in: Metals, Jahrgang 6, Nr. 2, 15.02.2016, S. UNSP 31.
  • Ti/Al Multi-Layered Sheets: Accumulative Roll Bonding (Part A). / Romberg, J; Freudenberger, J; Bauder, H et al.
    in: Metals, Jahrgang 6, Nr. 2, 15.02.2016, S. UNSP 30.
  • Tungsten as a Chemically-Stable Electrode Material on Ga-Containing Piezoelectric Substrates Langasite and Catangasite for High-Temperature SAW Devices. / Rane, G; Seifert, M; Menzel, S et al.
    in: Materials, Jahrgang 9, Nr. 2, 15.02.2016, S. UNSP 101.
  • Exceptional damage-tolerance of a medium-entropy alloy CrCoNi at cryogenic temperatures. / Gludovatz, B; Hohenwarter, A; Thurston, K et al.
    in: Nature Communications, Jahrgang 7, 15.02.2016, S. ARTN 10602.
  • Interfacial interactions between liquid Ti-Al alloys and TiB2 ceramic. / Xi, L; Kaban, I; Nowak, R et al.
    in: Journal of Materials Science, Jahrgang 51, Nr. 4, 15.02.2016, S. 1779-1787.
  • Atomic structure and thermal behavior of (Co-0.65,Fe-0.35)(72)Ta8B20 metallic glass with excellent soft magnetic properties. / Taghvaei, A; Bednarcik, J; Eckert, J.
    in: Intermetallics, Jahrgang 69, 15.02.2016, S. 21-27.
  • Preparation of cast-iron-based nanocrystalline alloy with Cu and Nb addition. / Jung, H; Stoica, M; Yi, S et al.
    in: Intermetallics, Jahrgang 69, 15.02.2016, S. 54-61.
  • Overload effect revisited - Investigation by use of configurational forces. / Ochensberger, W; Kolednik, O.
    in: International Journal of Fatigue, Jahrgang 83, 15.02.2016, S. 161-173.
  • Shear avalanches in plastic deformation of a metallic glass composite. / Tong, X; Wang, G; Yi, J et al.
    in: International Journal of Plasticity, Jahrgang 77, 15.02.2016, S. 141-155.
  • Microstructure and metallic ion release of pure titanium and Ti-13Nb-13Zr alloy processed by high pressure torsion. / Dimic, I; Cvijovic-Alagic, I; Voelker, B et al.
    in: MATERIALS & DESIGN, Jahrgang 91, 05.02.2016, S. 340-347.
  • Microstructure and phase formation in Al-20Si-5Fe-3Cu-1Mg synthesized by selective laser melting. / Ma, P; Jia, Y; Prashanth, K et al.
    in: Journal of Alloys and Compounds, Jahrgang 657, 05.02.2016, S. 430-435.
  • Effect of substrate material on the growth and field emission characteristics of large-area carbon nanotube forests. / Ummethala, R; Wenger, D; Tedde, S et al.
    in: Journal of Applied Physics, Jahrgang 119, Nr. 4, 28.01.2016, S. ARTN 044302.
  • Reentrant spin-glass behavior and bipolar exchange-bias effect in "Sn" substituted cobalt-orthotitanate. / Nayak, S; Joshi, D; Krautz, M et al.
    in: Journal of Applied Physics, Jahrgang 119, Nr. 4, 28.01.2016, S. ARTN 043901.
  • Miniaturized fracture experiments to determine the toughness of individual films in a multilayer system. / Treml, R; Kozic, D; Schöngrundner, R et al.
    in: Extreme Mechanics Letters, Jahrgang 8, 25.01.2016, S. 235-244.
  • High resolution determination of local residual stress gradients in single- and multilayer thin film systems. / Treml, R; Kozic, D; Zechner, J et al.
    in: Acta Materialia, Jahrgang 103, 15.01.2016, S. 616-623.
  • Microstructural evolution and strength variability in microwires. / Agepati, S; Ghosh, P; Chokshi, A.
    in: Materials Science and Engineering: A, Jahrgang 652, 15.01.2016, S. 239-249.
  • Improved cycling stability of lithium-sulfur batteries using a polypropylene-supported nitrogen-doped mesoporous carbon hybrid separator as polysulfide adsorbent. / Balach, J; Jaumann, T; Klose, M et al.
    in: Journal of Power Sources, Jahrgang 303, 15.01.2016, S. 317-324.
  • The effect of bending loading conditions on the reliability of inkjet printed and evaporated silver metallization on polymer substrates. / Glushko, O; Cordill, M; Klug, A et al.
    in: Microelectronics Reliability, Jahrgang 56, 15.01.2016, S. 109-113.
  • Processing of Al-12Si-TNM composites by selective laser melting and evaluation of compressive and wear properties. / Prashanth, K; Scudino, S; Chaubey, A et al.
    in: Journal of Materials Research, Jahrgang 31, Nr. 1, 14.01.2016, S. 55-65.
  • Localized crystallization in shear bands of a metallic glass. / Yan, Z; Song, K; Hu, Y et al.
    in: Scientific Reports, Jahrgang 6, 13.01.2016, S. ARTN 19358.
  • Two-phase quasi-equilibrium in β-type Ti-based bulk metallic glass composites. / Zhang, L; Pauly, S; Tang, M et al.
    in: Scientific Reports, Jahrgang 6, 12.01.2016, S. 1-10.
  • Deformation and fracture characteristics of ultrafine-grained vanadium. / Hohenwarter, A; Wurster, S.
    in: Materials Science and Engineering: A, Jahrgang 650, 05.01.2016, S. 492-496.
  • Microstructure and properties of FeCrMoVC tool steel produced by selective laser melting. / Sander, J; Hufenbach, J; Giebeler, L et al.
    in: MATERIALS & DESIGN, Jahrgang 89, 05.01.2016, S. 335-341.
  • Cross-sectional structure-property relationship in a graded nanocrystalline Ti1−xAlxN thin film. / Zalesak, J; Bartosik, M; Daniel, R et al.
    in: Acta Materialia, Jahrgang 102, 01.01.2016, S. 212-219.
  • Structure and properties of sputter deposited crystalline and amorphous Cu-Ti films. / Turnow, H; Wendrock, H; Menzel, S et al.
    in: Thin Solid Films, Jahrgang 598, 01.01.2016, S. 184-188.

Master Thesis

  • Micromechanical Characterization of Self-Organized Ti1-xAIxN Nanolamellae: The Influence of Interface Coherency and Phase Alteration on Fracture Behaviour. / Meindlhumer, Michael.
    2016.