Publications 2018

Enhancement of hydrogen storage properties from amorphous Mg85Ni5Y10 alloy
Zhou H., Z. Ding, Y.A. Chen, Z.Q. Lan, S.F. Guo, F. Spieckermann, V. Zadorozhnyy, J. Tan, F.S. Pan, J. Eckert
J NON-CRYST SOLIDS, 605, ARTN 122167 (2023)

DOI RIS ENW BIB

Additive manufacturing of CMCs with bimodal microstructure
Maurya H.S., R.J. Vikram, K. Kosiba, K. Juhani, F. Sergejev, S. Suwas, K.G. Prashanth
J ALLOY COMPD, 938, ARTN 168416 (2023)

DOI RIS ENW BIB

Strong and ductile titanium via additive manufacturing under a reactive atmosphere
Dong Y., D. Wang, Q. Li, X. Luo, J. Zhang, K.G. Prashanth, P. Wang, J. Eckert, L. Madler, V.I. Okulov, M. Yan
MATER TODAY ADV, 17, ARTN 100347 (2023)

DOI RIS ENW BIB

Hierarchical microstructures and strengthening mechanisms of nano-TiC reinforced CoCrFeMnNi high-entropy alloy composites prepared by laser powder bed fusion
Chen H., K. Kosiba, T. Lu, N. Yao, Y. Liu, Y. Wang, K.G. Prashanth, C. Suryanarayana
J MATER SCI TECHNOL, 136, 245-259 (2023)

DOI RIS ENW BIB

A novel crack-free and refined 2195-Ti/CeB6 composites prepared by laser powder bed fusion
Xi L., J. Xu, D. Gu, L. Feng, Q. Lu, K.G. Prashanth
MATER LETT, 333, ARTN 133572 (2023)

DOI RIS ENW BIB

Can Severe Plastic Deformation Tune Nanocrystallization in Fe-Based Metallic Glasses?
Antoni M., F. Spieckermann, N. Plutta, C. Gammer, M. Kapp, P. Ramasamy, C. Polak, R. Pippan, M.J.J. Zehetbauer, J. Eckert
MATERIALS, 16, ARTN 1260 (2023)

DOI RIS ENW BIB

Pd-based Metallic Glasses as Promising Materials for Hydrogen Energy Applications
Sarac B., A.S. Sarac, J. Eckert
J ELECTROCHEM SOC, 170, ARTN 014503 (2023)

DOI RIS ENW BIB

Exchange Bias Demonstrated in Bulk Nanocomposites Processed by High-Pressure Torsion
Zawodzki M., L. Weissitsch, H. Krenn, S. Wurster, A. Bachmaier
NANOMATERIALS, 13, ARTN 344 (2023)

DOI RIS ENW BIB

Surface Chemistry and Degradation Processes of Dense La0.6Sr0.4CoO3-delta Thin Film Electrodes
Siebenhofer M., U. Haselmann, A. Nenning, G. Friedbacher, E.A. Bumberger, S. Wurster, W. Artner, H. Hutter, Z. Zhang, J. Fleig, M. Kubicek
J ELECTROCHEM SOC, 170, ARTN 014501 (2023)

DOI RIS ENW BIB

Circumventing Solidification Cracking Susceptibility in Al-Cu Alloys Prepared by Laser Powder Bed Fusion
Xi L., Q. Lu, D. Gu, S. Cao, H. Zhang, I. Kaban, B. Sarac, K.G. Prashanth, J. Eckert
3D PRINT ADDIT MANUF (2022)

DOI RIS ENW BIB

Phase Transformation Induced by High Pressure Torsion in the High-Entropy Alloy CrMnFeCoNi
Chulist R., A. Pukenas, P. Chekhonin, A. Hohenwarter, R. Pippan, N. Schell, W. Skrotzki
MATERIALS, 15, ARTN 8407 (2022)

DOI RIS ENW BIB

Decomposition-resistant carbonitride precipitates in X30CrMoN15-1 high-nitrogen bearing steel deformed by high-pressure torsion
Kiranbabu S., Y. Qin, L. Sreekala, S.M. Das, R. Pippan, L. Morsdorf, M. Herbig
Materials Science & Engineering A, 144529 (2022)

DOI RIS ENW BIB

Surface Topography and Biocompatibility of cp-Ti Grade2 Fabricated by Laser-Based Powder Bed Fusion: Influence of Printing Orientation and Surface Treatments
Petrusa J., B. Meier, G. Gruenbacher, W. Waldhauser, J. Eckert
ADV ENG MATER, 2022, 2201073 (2022)

DOI RIS ENW BIB

Probing the stability, adhesion strength, and fracture mechanism of Mg/ Al2Y interfaces via first-principles calculations
Zhou Y., H. Wang, Q. Dong, J. Tan, X. Chen, B. Jiang, F. Pan, J. Eckert
MATERIALS TODAY COMMUNICATIONS, 33, ARTN 104612 (2022)

DOI RIS ENW BIB

Selective laser melting of in-situ CoCrFeMnNi high entropy alloy: Effect of remelting
Karimi J., L. Kollo, R. Rahmani, P. Ma, Y.D. Jia, K.G. Prashanth
J. Manuf. Process., 84, 55-63 (2022)

DOI RIS ENW BIB

Reactive interdiffusion of an Al film and a CoCrFeNi high-entropy alloy at elevated temperatures
Zhang Z., S. Fellner, S. Ketov, M.J. Cordill, S. Huaping, C. Mitterer, K. Song, C. Gammer, J. Eckert
Intermetallics, 1-11 (2022)

DOI RIS ENW BIB

Enhanced mechanical performance of gradient-structured CoCrFeMnNi high-entropy alloys induced by industrial shot-blasting
Zhang M.Z., K. Zhang, K.K. Song, X.-Y. Zou, W.D. Song, K.F. Li, L.N. Hu, Z.Q. Zhang, J. Eckert
RARE METALS, 1-10 (2022)

DOI RIS ENW BIB

Iron oxide - poly(m-anthranilic acid)-poly(e-caprolactone) electrospun composite nanofibers: fabrication and properties
Huner K., B. Sarac, E. Yuece, A. Rezvan, M. Micusik, M. Omastova, J. Eckert, A.S. Sarac
MOL SYST DES ENG (2022)

DOI RIS ENW BIB

In situ electrochemical observation of anisotropic lattice contraction of La0.6Sr0.4FeO3-delta electrodes during pulsed laser deposition
Riedl C., M. Siebenhofer, S. Raznjevic, A.E. Bumberger, Z. Zhang, A. Limbeck, A.K. Opitz, M. Kubicek, J. Fleig
PHYS CHEM CHEM PHYS, 25, 142-153 (2022)

DOI RIS ENW BIB

Electromechanical Behavior of Al/Al2O3 Multilayers on Flexible Substrates: Insights from In Situ Film Stress and Resistance Measurements
Putz B., T.E.J. Edwards, E. Huszar, P.A. Gruber, K.P. Gradwohl, P. Kreiml, D.M. Toebbens, J. Michler
ADV ENG MATER, 1-15 (2022)

DOI RIS ENW BIB

Optimal tensile properties of laser powder bed fusion hereditary basket-weave microstructure in additive manufactured Ti6Al4V
Lu S.L., Z.J. Zhang, R. Liu, X.H. Zhou, X.G. Wang, B.N. Zhang, X.M. Zhao, J. Eckert, Z.F. Zhang
Addit. Manuf., 59, ARTN 103092 (2022)

DOI RIS ENW BIB

Local microstructural evolution and the role of residual stresses in the phase stability of a laser powder bed fused cold-work tool steel
Platl J., S. Bodner, H. Leitner, C. Turk, M.A. Nielsen, J. Keckes, R. Schnitzer
Mater. Charact., 193, ARTN 112318 (2022)

DOI RIS ENW BIB

New-generation biocompatible Ti-based metallic glass ribbons for flexible implants
Yüce E., L. Zarazua-Villalobos, B. Ter-Ovanessian, E. Sharifikolouei, Z. Najmi, F. Spieckermann, J. Eckert, B. Sarac
Mater. Des., 223, ARTN 111139 (2022)

DOI RIS ENW BIB

Improvement of hardness in Ti-stabilized austenitic stainless steel
Sharifikolouei E., B. Sarac, A. Micoulet, R. Mager, M. Watari-Alvarez, E. Hadjixenophontos, Z. Burghard, G. Schmitz, J.P. Spatz
MATER DESIGN, 223, ARTN 111242 (2022)

DOI RIS ENW BIB

Microstructure and Tribological Behavior of Fe-Based Amorphous Alloy Fabricated by Plasma Spraying and Laser Remelting
Ma P., Z. Yang, L. Fang, Z. Zhang, Y. Fang, N. Zhang, K.G. Prashanth, Y. Jia
T INDIAN I METALS, 2022, 1-8 (2022)

DOI RIS ENW BIB

Fiber Laser Welded Cobalt Super Alloy L605: Optimization of Weldability Characteristics
Prasad B.H., G.M. Reddy, A.K. Das, K.G. Prashanth
MATERIALS, 15, ARTN 7708 (2022)

DOI RIS ENW BIB

Mechanical Properties and Microstructural Evolution of Ti-25Nb-6Zr Alloy Fabricated by Spark Plasma Sintering at Different Temperatures
Zhu Q., P. Chen, Q. Xiao, F. Li, J. Yi, K.G. Prashanth, J. Eckert
METALS, 12, ARTN 1824 (2022)

DOI RIS ENW BIB

Direct Formation of Hard-Magnetic Tetrataenite in Bulk Alloy Castings
Ivanov Y., B. Sarac, S. Ketov, J. Eckert, L. Greer
ADVANCED SCIENCE, 2204315, 1-8 (2022)

DOI RIS ENW BIB

Importance of the micro-lattice structure of selective laser melting processed Mo/Mo(x)S(x+1) composite: Corrosion studies on the electrochemical performance in aqueous solutions
Alinejadian N., S.H. Kazemi, M. Grossberg-Kuusk, L. Kollo, I. Odnevall, K.G. Prashanth
MATER TODAY CHEM, 26, ARTN 101219 (2022)

DOI RIS ENW BIB

Microstructure and Nanoindentation Creep Behavior of Binary Al-Cu Alloy Synthesized at High Pressure
Ma P., Z. Zhang, X. Liu, X. Shi, K.G. Prashanth, Y. Jia
JOM, 12345, 1-8 (2022)

DOI RIS ENW BIB

Effect of a single overload on the cyclic R-curve behaviour of a gamma-TiAl TNM alloy
Lintner A., R. Pippan, M. Schloffer, A. Hohenwarter
Int. J. Fatigue, 163, ARTN 107083 (2022)

DOI RIS ENW BIB

Effect of powder bed preheating on the crack formation and microstructure in ceramic matrix composites fabricated by laser powder-bed fusion process
Maurya H.S., K. Kosiba, K. Juhani, F. Sergejev, K.G. Prashanth
Addit. Manuf., 58, ARTN 103013 (2022)

DOI RIS ENW BIB

MEMS-Based in situ electron-microscopy investigation of rapid solidification and heat treatment on eutectic Al-Cu
Dumitraschkewitz P., M.A. Tunes, C.R. Quick, D.S.R. Coradini, T.M. Kremmer, P. Ramasamy, P.J. Uggowitzer, S. Pogatscher
Acta Mater., 239, ARTN 118225 (2022)

DOI RIS ENW BIB

Designing lightweight multicomponent magnesium alloys with exceptional strength and high stiffness
Gu Z., Y. Zhou, Q. Dong, G. He, J. Cui, J. Tan, X. Chen, B. Jiang, F. Pan, J. Eckert
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 855, ARTN 143901 (2022)

DOI RIS ENW BIB

Enhancement in strength and thermal stability of selective laser melted Al-12Si by introducing titanium nanoparticles
Qi J.F., C.Y. Liu, Z.W. Chen, Z.Y. Liu, J.S. Tian, J. Feng, I.V. Okulov, J. Eckert, P. Wang
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 855, ARTN 143833 (2022)

DOI RIS ENW BIB

Fatigue of copper films subjected to high-strain rate thermo-mechanical pulsing
Moser S., M. Kleinbichler, J. Zechner, M. Reisinger, M. Nelhiebel, M.C. Cordill
Microelectron. Reliab., 137, ARTN 114782 (2022)

DOI RIS ENW BIB

Crack Formation and Control in an AlCoCrFeNi High Entropy Alloy Fabricated by Selective Laser Melting
Wei S., P. Ma, Y. Fang, Z. Zhang, Z. Yang, X. Shi, K.G. Prashanth
3D PRINT ADDIT MANUF, 2022, 1-12 (2022)

DOI RIS ENW BIB

Electroless Ni-P-MoS2-Al2O3 Composite Coating with Hard and Self-Lubricating Properties
Mohanty S., N. Jamal, A.K. Das, K.G. Prashanth
MATERIALS, 15, ARTN 6806 (2022)

DOI RIS ENW BIB

Crack propagation resistance of TiAl alloys
Pippan R., A. Hohenwarter
MRS Bull., 47, 1-8 (2022)

DOI RIS ENW BIB

Ti6Al4V Coating on 316L Substrate by Laser-based Fusion Process
Shukla R., K.G. Prashanth
Trans. Indian Inst. Met., 124, 1-10 (2022)

DOI RIS ENW BIB

Influence of the 1% Ti content on microstructure, friction coefficient and contribution to the strengthening mechanisms in the Al20Sn1Cu alloy
Lucchetta M.C., P. Ramasamy, F. Saporiti, J. Eckert, F. Audebert
RESULTS IN ENGINEERING, 15, ARTN 100506 (2022)

DOI RIS ENW BIB

Precipitation-based grain boundary design alters Inter- to Trans-granular Fracture in AlCrN Thin Films
Meindlhumer M., T. Ziegelwanger, J. Zalesak, M. Hans, L. Loefler, S. Spor, N. Jaeger, A. Stark, H. Hruby, R. Daniel, D. Holec, J.M. Schneider, C. Mitterer, J. Keckes
Acta Mater., 237, ARTN 118156 (2022)

DOI RIS ENW BIB

Interface-related deformation phenomena in metallic glass/high entropy nanolaminates
Xu Q., D. Sopu, X. Yuan, D. Kiener, J. Eckert
Acta Mater., 237, ARTN 118191 (2022)

DOI RIS ENW BIB

Influence of Processing Route on the Fracture Resistance of Equal Channel Angular Pressing Deformed Iron
Hohenwarter A., R. Pippan
Adv. Eng. Mater., 2201011, ARTN 2201011 (2022)

DOI RIS ENW BIB

A measurement structure for in-situ electrical monitoring of cyclic delamination
Moser S., D. Tscharnuter, M. Nelhiebel, M. Reisinger, J. Zechner, M.J. Cordill
Surf. Coat. Technol., 445, ARTN 128715 (2022)

DOI RIS ENW BIB

High-Entropy Alloy-Induced Metallic Glass Transformation: Challenges Posed by in situ Alloying via Additive Manufacturing
Hadibeik S., F. Spieckermann, M. Nosko, F. Khodabakhshi, M.H. Sohi, J. Eckert
Adv. Eng. Mater., 220764, ARTN 2200764 (2022)

DOI RIS ENW BIB

Effect of Wear Debris Entrapment on the Tribological Performance of AlCoCrFeNi Produced by Selective Laser Melting or Spark Plasma Sintering
Karimi J., M. Antonov, K.G. Prashanth
Metall. Mater. Trans. A-Phys. Metall. Mater. Sci., 12345, 1-7 (2022)

DOI RIS ENW BIB

Prior beta grain evolution and phase transformation of selective laser melted Ti6Al4V alloy during heat treatment
Lu S.L., Z.J. Zhang, R. Liu, Z. Qu, B. Wang, X.H. Zhou, J. Eckert, Z.F. Zhang
J. Alloy. Compd., 914, ARTN 165235 (2022)

DOI RIS ENW BIB

Carbon nanotube-polybutadiene-poly(ethylene oxide)-based composite fibers: Role of cryogenic treatment on intrinsic properties
Gurbuz R., B. Sarac, V. Soprunyuk, A. Rezvan, E. Yuce, W. Schranz, J. Eckert, A. Ozcan, A.S. Sarac
Polym. Adv. Technol., 5828, 1-11 (2022)

DOI RIS ENW BIB

Conditions near a crack tip: Advanced experiments for dislocation analysis and local strain measurement
Gammer C., D. An
MRS Bull., 47, 1-8 (2022)

DOI RIS ENW BIB

Mechanical Property Evaluation of CuNb Composites Manufactured with High-Pressure Torsion
Frazer D., R.C. Connick, C. Howard, M. Siddiqui, R. Fritz, P. Kutlesa, P. Hosemann
JOM, 123, 1-10 (2022)

DOI RIS ENW BIB

Magnetron Sputtered Non-Toxic and Precious Element-Free Ti-Zr-Ge Metallic Glass Nanofilms with Enhanced Biocorrosion Resistance
Sarac B., M. Micusik, B. Putz, S. Wurster, E. Sharifikolouei, L. Xi, M. Omastova, F. Spieckermann, C. Mitterer, J. Eckert
Adv. Mater. Interfaces, 123, ARTN 2201223 (2022)

DOI RIS ENW BIB

Achieving 1 GPa fatigue strength in nanocrystalline 316L steel through recovery annealing
Renk O., A. Hohenwarter, C. Gammer, J. Eckert, R. Pippan
Scr. Mater., 217, ARTN 114773 (2022)

DOI RIS ENW BIB

On the transition of failure control from material-intrinsic defects to defects forming during monotonically increasing and cyclic mechanical loading in WC-Co hard metal at elevated temperature
Klunsner T., T. Lube, P. Pichler, M. Krobath, L. Walch, K. Maier, W. Ecker, S. Marsoner, C. Czettl, R. Pippan
Acta Mater., 235, ARTN 118087 (2022)

DOI RIS ENW BIB

Hybrid metal-ceramic biomaterials fabricated through powder bed fusion and powder metallurgy for improved impact resistance of craniofacial implants
Rahmani R., N. Kamboj, M. Brojan, M. Antonov, K.G. Prashanth
MATERIALIA, 24, ARTN 101465 (2022)

DOI RIS ENW BIB

Influence of Hatch Strategy on Crystallographic Texture Evolution, Mechanical Anisotropy of Laser Beam Powder Bed Fused S316L Steel
Bodner S., K. Hlushko, K. Kutlesa, J. Todt, O. Renk, M. Meindlhumer, F. Resch, M.A. Nielsen, J. Keckes, J. Eckert
Adv. Eng. Mater., 1234, ARTN 2200524 (2022)

DOI RIS ENW BIB

Antibacterial activity, cytocompatibility, and thermomechanical stability of Ti40Zr10Cu36Pd14 bulk metallic glass
Rezvan A., E. Sharifikolouei, A. Lassnig, V. Soprunyuk, C. Gammer, F. Spieckermann, W. Schranz, Z. Najmi, A. Cochis, A.C. Scalia, L. Rimondini, M. Manfredi, J. Eckert, B. Sarac
MATERIALS TODAY BIO, 16, ARTN 100378 (2022)

DOI RIS ENW BIB

Microstructure, Mechanical Properties, and Corrosion Behavior of 06Cr15Ni4CuMo Processed by Using Selective Laser Melting
Maya J., K. Sivaprasad, G.V.S. Kumar, R. Baitimerov, P. Lykov, K.G. Prashanth
METALS, 12, ARTN 1303 (2022)

DOI RIS ENW BIB

Atomic-scale understanding of the structural evolution of TiN/AlN superlattice during nanoindentation - Part 1: Deformation
Chen Z., Y. Zheng, Y. Huang, Z. Gao, H. Sheng, M. Bartosik, P.H. Mayrhofer, Z. Zhang
Acta Mater., 234, ARTN 118008 (2022)

DOI RIS ENW BIB

Atomic-scale understanding of the structural evolution in TiN/AlN superlattice during nanoindentation-Part 2: Strengthening
Chen Z., Y. Zheng, Y. Huang, Z. Gao, H. Sheng, M. Bartosik, P. Mayrhofer, Z. Zhang
Acta Mater., 234, ARTN 118009 (2022)

DOI RIS ENW BIB

Selective Laser Melting of TiC-Based Cermet: HIP Studies
Maurya H.S., L. Kollo, M. Tarraste, K. Juhani, F. Sergejev, K.G. Prashanth
Trans. Indian Inst. Met., 98-105 (2022)

DOI RIS ENW BIB

Wire Arc Additive Manufacturing of NiTi 4D Structures: Influence of Interlayer Delay
Singh S., I.A. Palani, C.P. Paul, A. Funk, K.G. Prashanth
3D Print. Addit. Manuf., 123, 1-8 (2022)

DOI RIS ENW BIB

Effect of TiB2 addition on the mechanical and biological response of spark plasma sintered Ti6Al7Nb matrix composites
Singh N., R. Ummethala, K.B. Surreddi, J. Jayaraj, R. Sokkalingam, M. Rajput, K. Chatterjee, K.G. Prashanth
J. Alloy. Compd., 924, ARTN 166502 (2022)

DOI RIS ENW BIB

A novel crack-free Ti-modified Mo alloy designed for laser powder bed fusion
Zhang C., P. Wang, C.Y. Liu, Z.Y. Liu, M.W. Wu, X.H. Gao, M.H. LI, C. Yang, K.G. Prashanth, Z.W. Chen
J. Alloy. Compd., 910, ARTN 164802 (2022)

DOI RIS ENW BIB

Tribological investigations of Mo films deposited on thin polyimide substrates
Kobierska E., S. Zak, S. Hirn, M.J. Cordill, R. Franz, M.R. de Figueiredo
Surf. Coat. Technol., 442, ARTN 128549 (2022)

DOI RIS ENW BIB

Effect of preheating and cooling of the powder bed by laser pulse shaping on the microstructure of the TiC based cermets
Maurya H.S., L. Kollo, K. Juhani, F. Sergejev, K.G. Prashanth
Ceram. Int., 48, 20612-20618 (2022)

DOI RIS ENW BIB

Fabrication of stainless-steel microfibers with amorphous-nanosized microstructure with enhanced mechanical properties
Sharifikolouei E., B. Sarac, Y. Zheng, P. Bala, J. Eckert
Sci Rep, 12, ARTN 10784 (2022)

DOI RIS ENW BIB

Mitigating the detrimental effects of galvanic corrosion by nanoscale composite architecture design
Renk O., I. Weissensteiner, M. Cihova, E.-M. Steyskal, N.G. Sommer, M. Tkadletz, S. Pogatscher, P. Schmutz, J. Eckert, P.J. Uggowitzer, R. Pippan, A.M. Weinberg
NPJ MATERIALS DEGRADATION, 6, ARTN 47 (2022)

DOI RIS ENW BIB

Mapping Shear Bands in Metallic Glasses: From Atomic Structure to Bulk Dynamics
Sheng H., D. Sopu, S. Fellner, J. Eckert, C. Gammer
Phys. Rev. Lett., 128, ARTN 245501 (2022)

DOI RIS ENW BIB

Film thickness and architecture effects in biaxially strained polymer supported Al/Mo bilayers
Cordill M.J., P. Kreiml, B. Putz, C.O.W. Trost, A. Lassnig, C. Mitterer, D. Faurie, P.-O. Renault
MATERIALS TODAY COMMUNICATIONS, 31, ARTN 103455 (2022)

DOI RIS ENW BIB

Synthesis and structure of refractory high entropy alloy thin films based on the MoNbTaW system
Gruber G., A. Lassnig, S. Zak, C. Gammer, M.J. Cordill, R. Franz
Surf. Coat. Technol., 439, ARTN 128446 (2022)

DOI RIS ENW BIB

Thermoplasticity of metallic glasses: Processing and applications
Sarac B., J. Eckert
Prog. Mater. Sci., 127, ARTN 100941 (2022)

DOI RIS ENW BIB

Technical Note: Hardness, Corrosion Behavior, and Microstructural Characteristics of a Selective Laser Melted 17-4 PH Steel
Chaitanya P., R. Goud, R. Raghavan, M. Ramakrishna, K.G. Prashanth, S. Gollapudi
Corrosion, 78, 465-472 (2022)

DOI RIS ENW BIB

Additive Manufacturing of CoCrFeMnNi High-Entropy Alloy/AISI 316L Stainless Steel Bimetallic Structures
Sokkalingam R., Z. Chao, K. Sivaprasad, V. Muthupandi, J. Jayaraj, P. Ramasamy, J. Eckert, K.G. Prashanth
Adv. Eng. Mater., 1234, ARTN 2200341 (2022)

DOI RIS ENW BIB

Configurational force based analysis of creep crack growth
Kolednik O., A. Tiwari, C. Posch, M. Kegl
Int. J. Fract., 2022, 1-25 (2022)

DOI RIS ENW BIB

High-Throughput Micromechanical Testing Enabled by Optimized Direct Laser Writing
Jelinek A., S. Zak, M. Alfreider, D. Kiener
Adv. Eng. Mater., 2022, ARTN 2200288 (2022)

DOI RIS ENW BIB

Redeposition layer formation caused by shading effect during sputter cleaning and associated damage on rake face of TiN coated high-speed steel drills
Kampichler J., Z.L. Zhang, T. Kluensner, B. Sartory, J. Wosik, F. Nahif
Surf. Coat. Technol., 438, ARTN 128412 (2022)

DOI RIS ENW BIB

Mechanical Properties, Microstructure, and Actuation Behavior of Wire Arc Additive Manufactured Nitinol: Titanium Bimetallic Structures
Singh S., E. Demidova, N. Resnina, S. Belyaev, I.A. Palani, C.P. Paul, A. Kumar, K.G. Prashanth
3D Print. Addit. Manuf., 9, 98-105 (2022)

DOI RIS ENW BIB

Effect of Powder Characteristic and Aging Treatment on the Corrosion Behavior of Selective Laser Melted Al-20Si Alloy
Ma P., Z. Zhang, Y. Ke, S. Yang, K. Deng, P. Cheng, H. Chen, K.G. Prashanth
Trans. Indian Inst. Met. (2022)

DOI RIS ENW BIB

Interaction of crack and hole: effects on crack trajectory, crack driving force and fracture toughness
Brescakovic D., M. Kegl, O. Kolednik
Int. J. Fract., 88, 1-26 (2022)

DOI RIS ENW BIB

Ti6Al7Nb-TiB nanocomposites for ortho-implant applications
Singh N., V. Edachery, M. Rajput, K. Chatterjee, S.V. Kailas, K.G. Prashanth
J. Mater. Res., 1234, 98-105 (2022)

DOI RIS ENW BIB

A novel approach for determining the stress intensity factor for cracks in multilayered cantilevers
Sistaninia M., O. Kolednik
Eng. Fract. Mech., 266, ARTN 108386 (2022)

DOI RIS ENW BIB

Atomistic mechanisms underlying plasticity and crack growth in ceramics: a case study of AlN/TiN superlattices
Koutna N., L. Loefler, D. Holec, Z. Chen, Z. Zhang, L. Hultman, P.H. Mayrhofer, D.G. Sangiovanni
Acta Mater., 229, ARTN 117809 (2022)

DOI RIS ENW BIB

Deformation-induced medium-range order changes in bulk metallic glasses
Nomoto K., B. Li, C. Gammer, A.V. Ceguerra, H. Bilal, A. Hohenwarter, J. Eckert, B. Gludovatz, S.P. Ringer, J.J. Kruzic
Phys. Rev. Mater., 6, ARTN 043603 (2022)

DOI RIS ENW BIB

Subtle change in the work hardening behavior of fcc materials processed by selective laser melting
Sokkalingam R., K. Sivaprasad, N. Singh, V. Muthupandi, P. Ma, Y.D. Jia, K.G. Prashanth
PROGRESS IN ADDITIVE MANUFACTURING, 7, 453-461 (2022)

DOI RIS ENW BIB

Effect of the Laser Processing Parameters on the Selective Laser Melting of TiC-Fe-Based Cermets
Maurya H., L. Kollo, M. Tarraste, K. Juhani, F. Sergejev, K. Prashanth
JOURNAL OF MANUFACTURING AND MATERIALS PROCESSING, 6, ARTN 35 (2022)

DOI RIS ENW BIB

Linking through-thickness cracks in metallic thin films to in-situ electrical resistance peak broadening
Gebhart D., A. Krapf, C. Gammer, B. Merle, M. Cordill
Scr. Mater., 212, ARTN 114550 (2022)

DOI RIS ENW BIB

Maximizing the degree of rejuvenation in metallic glasses
Yuan X., D. Sopu, F. Spieckermann, K.K. Song, S. Ketov V, K.G. Prashanth, J. Eckert
Scr. Mater., 212, ARTN 114575 (2022)

DOI RIS ENW BIB

Influence of grain aspect-ratio on the fracture properties of ultrafine-grained tantalum
Hohenwarter A., M. Rockenschaub, O. Renk
Mater. Des., 216, ARTN 110545 (2022)

DOI RIS ENW BIB

Thermal stress analysis and structural optimization of ladle nozzle based on finite element simulation
Rong Z., J. Yi, F. Li, Y. Liu, J. Eckert
MATERIALS RESEARCH EXPRESS, 9, ARTN 045601 (2022)

DOI RIS ENW BIB

Characterization methods for strain-induced damage in polypropylene
Wiener J., F. Preissegger, B. Plank, F. Arbeiter, O. Kolednik, G. Pinter
Polym. Eng. Sci., 25, ARTN25979 (2022)

DOI RIS ENW BIB

Quantitative Strain and Topography Mapping of 2D Materials Using Nanobeam Electron Diffraction
Sickel J., Ml Asbach, C. Gammer, R. Bratschitsch, H. Kohl
Microsc. microanal., 2022, 1-15 (2022)

DOI RIS ENW BIB

Editorial: Fundamentals and Challenges of Advanced Amorphous and High-Entropy Alloys</p>
Song K., Y. Huang, R. Li, J. Qiao, Z. Wang, K.G. Prashanth, D. Sopu
Front. Mater., 9, ARTN 874556 (2022)

DOI RIS ENW BIB

Role of laser remelting and heat treatment in mechanical and tribological properties of selective laser melted Ti6Al4V alloy
Karimi J., M. Antonov, L. Kollo, K.G. Prashanth
J. Alloy. Compd., 897, ARTN 163207 (2022)

DOI RIS ENW BIB

On the existence of orthorhombic martensite in a near-alpha titanium base alloy used for additive manufacturing
Fleissner-Rieger C., M. Tunes, C. Gammer, T. Joerg, T. Pfeifer, M. Musi, F. Mendez-Martin, H. Clemens
J. Alloy. Compd., 897, ARTN 163155 (2022)

DOI RIS ENW BIB

Manufacturing of Textured Bulk Fe-SmCo5 Magnets by Severe Plastic Deformation
Weissitsch L., M. Stueckler, S. Wurster, J. Todt, P. Knoll, H. Krenn, R. Pippan, A. Bachmaier
NANOMATERIALS, 12, ARTN 963 (2022)

DOI RIS ENW BIB

The effect of solute atoms on the bulk and grain boundary cohesion in Ni: Implications for hydrogen embrittlement
He S., W. Ecker, O.E. Peil, R. Pippan, V.I. Razumovskiy
MATERIALIA, 21, ARTN 101293 (2022)

DOI RIS ENW BIB

Fracture of severely plastically deformed titanium
Volker B., S. Wurster, R. Pippan, A. Hohenwarter
Mater. Lett., 309, ARTN 131382 (2022)

DOI RIS ENW BIB

Mechanical and Tribological Behavior of Gravity and Squeeze Cast Novel Al-Si Alloy
Chandra V., K. Krishna, M. Ravi, K. Sivaprasad, S. Dhanasekaran, K. Prashanth
METALS, 12, ARTN 194 (2022)

DOI RIS ENW BIB

Cracking mechanism in a laser powder bed fused cold-work tool steel: The role of residual stresses, microstructure and local elemental concentrations
Platl J., S. Bodner, C. Hofer, A. Landefeld, H. Leitner, C. Turk, M.A. Nielsen, A.G. Demir, B. Previtali, J. Keckes, R. Schnitzer
Acta Mater., 225, ARTN 117570 (2022)

DOI RIS ENW BIB

High virucidal potential of novel ceramic-metal composites fabricated via hybrid selective laser melting and spark plasma sintering routes
Rahmani R., K. Molan, M. Brojan, K. Prashanth, D. Stopar
Int. J. Adv. Manuf. Technol., 2022, ARTN 8878 (2022)

DOI RIS ENW BIB

Effect of supporting electrolyte on capacitance and morphology of electrodeposited poly(3,4-propylenedioxythiophene) derivatives bearing reactive functional groups
Sarac B., T. Karazehir, H.-D. Gilsing, J. Eckert, A.S. Sarac
Mol. Syst. Des. Eng., 460, 460-479 (2022)

DOI RIS ENW BIB

Influence of interlayers on the interfacial behavior of Ag films on polymer substrates
Cordill M., M. Paulitsch, C. Katsarelis, B. Putz, A. Lassnig, M. Kennedy
Thin Solid Films, 742, ARTN 139051 (2022)

DOI RIS ENW BIB

Selective Laser Melting of Commercially Pure Molybdenum by Laser Rescanning
Alinejadian N., P. Wang, L. Kollo, K.G. Prashanth
3D Print. Addit. Manuf., 123, 1-7 (2022)

DOI RIS ENW BIB

Cementite decomposition in 100Cr6 bearing steel during high-pressure torsion: Influence of precipitate composition, size, morphology and matrix hardness
Kiranbabu S., P.-Y. Tung, L. Sreekala, T.S. Prithiv, T. Hickel, R. Pippan, L. Morsdorf, M. Herbig
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 833, ARTN 142372 (2022)

DOI RIS ENW BIB

Laser additive manufacturing of nano-TiC particles reinforced CoCrFeMnNi high-entropy alloy matrix composites with high strength and ductility
Chen H., T. Lu, Y. Wang, Y. Liu, T. Shi, K. Prashanth, K. Kosiba
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 833, ARTN 142512 (2022)

DOI RIS ENW BIB

Precipitation behavior of a Co-free Fe-Ni-Cr-Mo-Ti-Al maraging steel after severe plastic deformation
Zeisl S., A. Lassnig, A. Hohenwarter, F. Mendez-Martin
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 833, ARTN 142416 (2022)

DOI RIS ENW BIB

Microstructure-dependent phase stability and precipitation kinetics in equiatomic CrMnFeCoNi high-entropy alloy: Role of grain boundaries
Daniel R., J. Zalesak, I. Matko, W. Baumegger, A. Hohenwarter, E.P. George, J. Keckes
Acta Mater., 223, ARTN 117470 (2022)

DOI RIS ENW BIB

Fabrication of Al/Mg Bimetallic Thin-Walled Ultrafine-Grained Tube by Severe Plastic Deformation
Hosseini S.M., M. Roostaei, M. Mosavi Mashhadi, H. Jabbari, G. Faraji
J. Mater. Eng. Perform., 021, ARTN 06514-5 (2022)

DOI RIS ENW BIB

Evolution of Microstructure and Mechanical Properties of LM25-HEA Composite Processed through Stir Casting with a Bottom Pouring System
Chinababu M., N. Naga Krishna, K. Sivaprasad, K.G. Prashanth, E. Bhaskara Rao
MATERIALS, 15, ARTN 230 (2022)

DOI RIS ENW BIB

Electron Back Scatter Diffraction and Synchrotron X-Ray Peak Profile Analysis as Tools for Microstructural Characterization of Large Strain Work Hardened Metals
Hebesberger T., E. Schafler, M. Zehetbauer, R. Pippan, T. Ungar, S. Bernstorff
Int. J. Mater. Res., 92, 410-416 (2022)

DOI RIS ENW BIB

Annealing metallic glasses above T-g in order to accelerate the relaxation process in molecular dynamics simulations
Sopu D., X. Yuan, J. Eckert
Appl. Phys. Lett., 120, ARTN 011904 (2022)

DOI RIS ENW BIB

Selective Laser Melting of TiC-Fe via Laser Pulse Shaping: Microstructure and Mechanical Properties
Maurya H.S., L. Kollo, M. Tarraste, K. Juhani, F. Sergejev, K.G. Prashanth
3D Print. Addit. Manuf., 4, 57-63 (2021)

DOI RIS ENW BIB

Iron-rich talc as air-stable platform for magnetic two-dimensional materials
Matkovic A., L. Ludescher, O. Peil, A. Sharma, K. Gradwohl, M. Kratzer, M. Zimmermann, J. Genser, D. Knez, E. Fisslthaler, C. Gammer, A. Lugstein, R. Bakker, L. Romaner, D. Zahn, F. Hofer, G. Salvan, J. Raith, C. Teichert
NPJ 2D MATERIALS AND APPLICATIONS, 5, ARTN 94 (2021)

DOI RIS ENW BIB

Mechanism of cementite decomposition in 100Cr6 bearing steels during high pressure torsion
Qin Y., D. Mayweg, P. Tung, R. Pippan, M. Herbig
Acta Mater., 201, 79-93 (2021)

DOI RIS ENW BIB

Grain boundary segregation in Ni-base alloys: A combined atom probe tomography and first principles study
Ebner A., S. Jakob, H. Clemens, R. Pippan, V. Maier-Kiener, S. He, W. Ecker, D. Scheiber, V. Razumovskiy
Acta Mater., 221, ARTN 117354 (2021)

DOI RIS ENW BIB

Effect of cold rolling on the pressure coefficient of glass transition temperature in bulk metallic glasses
Jana P., J. Eckert, J. Das
Thermochim. Acta, 706, ARTN 179071 (2021)

DOI RIS ENW BIB

Investigating the Structure, Microstructure, and Texture in Selective Laser-Melted Sterling Silver 925
Vikram R.J., L. Kollo, K.G. Prashanth, S. Suwas
Metall. Mater. Trans. A-Phys. Metall. Mater. Sci., 52, 5329-5341 (2021)

DOI RIS ENW BIB

Rapid solidification and metastable phase formation during surface modifications of composite Al-Cr cathodes exposed to cathodic arc plasma
Golizadeh M., F. Martin, S. Wurster, J. Mogeritsch, A. Kharicha, S. Kolozsvari, C. Mitterer, R. Franz
J. Mater. Sci. Technol., 94, 147-163 (2021)

DOI RIS ENW BIB

Strain-hardening properties of the high-entropy alloy MoNbTaTiVZr processed by high-pressure torsion
Duan C., M. Reiberg, P. Kutlesa, X. Li, R. Pippan, E. Werner
Continuum Mech. Thermodyn., 21, ARTN 01065-5 (2021)

DOI RIS ENW BIB

Porosity and thickness effect of Pd-Cu-Si metallic glasses on electrocatalytic hydrogen production and storage
Sarac B., T. Karazehir, E. Yuece, M. Muehlbacher, A.S. Sarac, J. Eckert
Mater. Des., 210, ARTN 110099 (2021)

DOI RIS ENW BIB

Microstructure and mechanical properties of NiTi-SS bimetallic structures built using Wire Arc Additive Manufacturing
Singh S., A.N. Jinoop, I.A. Palani, C.P. Paul, K.P. Tomar, K.G. Prashanth
Mater. Lett., 303, ARTN 130499 (2021)

DOI RIS ENW BIB

In Vitro Corrosion Behavior of Selective Laser Melted Ti-35Nb-7Zr-5Ta
Ummethala R., J. Jayaraj, P.S. Karamched, S. Rathinavelu, N. Singh, K. Surreddi, K.G. Prashanth
J. Mater. Eng. Perform., 30, 7967-7978 (2021)

DOI RIS ENW BIB

Synergistic Effect of Ni and Co Alloying on Corrosion Behavior of Fe(Ni,Co)P13C7 Metallic Glasses in 1M NaCl Solution
Sarac B.
Int. J. Electrochem. Sci., 16, ARTN 211256 (2021)

DOI RIS ENW BIB

Direct observation of nanocrystal-induced enhancement of tensile ductility in a metallic glass composite
Gammer C., C. Rentenberger, D. Beitelschmidt, A. Minor, J. Eckert
Mater. Des., 209, ARTN 109970 (2021)

DOI RIS ENW BIB

Dissimilar welding of high-entropy alloy to Inconel 718 superalloy for structural applications
Sokkalingam R., B. Pravallika, K. Sivaprasad, V. Muthupandi, K.G. Prashanth
J. Mater. Res., 2021, ARTN 352 (2021)

DOI RIS ENW BIB

Influence of high pressure torsion on microstructure evolution and mechanical properties of AZ80/SiC magnesium matrix composites
Akbaripanah F., M. Sabbaghian, N. Fakhar, P. Minarik, J. Vesely, P.T. Hung, G. Kapoor, O. Renk, K. Mathis, J. Gubicza, J. Eckert
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 826, ARTN 141916 (2021)

DOI RIS ENW BIB

SHAPING A COMMUNITY: THE IMPACT OF THE MATERIALS PROCESSING & MANUFACTURING DIVISION
Calva K., D. Bourell, M. Cordill, M. Stoudt
JOM, 2021, ARTN 04931-4 (2021)

DOI RIS ENW BIB

Ti6Al7Nb-based TiB-reinforced composites by selective laser melting
Singh N., S. Acharya, K.G. Prashanth, K. Chatterjee, S. Suwas
J. Mater. Res., 36, 3691-3700 (2021)

DOI RIS ENW BIB

Investigation on microstructure and texture evolution of Ti-6Al-3Nb-2Zr-1Mo alloy during hot deformation
Lu L., Y. Zhang, Z. Zhang, K. Song, S. Li, Y. Li, F. Zhou, Q. Cao, Q. Feng, B. Zhang
MATERIALS RESEARCH EXPRESS, 8, ARTN 096520 (2021)

DOI RIS ENW BIB

Improved fracture resistance of Cu/Mo bilayers with thickness tailoring
Cordill M., T. Joerg, D. Toebbens, C. Mitterer
Scr. Mater., 202, ARTN 113994 (2021)

DOI RIS ENW BIB

Nanocrystalline FeCr alloys synthesised by severe plastic deformation-A potential material for exchange bias and enhanced magnetostriction
Weissitsch L., S. Wurster, A. Paulischin, M. Stückler, R. Pippan, A. Bachmaier
J. Magn. Magn. Mater., 534, ARTN 168017 (2021)

DOI RIS ENW BIB

Assessment of grain boundary cohesion of technically pure and boron micro-doped molybdenum via meso-scale three-point-bending experiments
Jakob S., A. Hohenwarter, A. Lorich, W. Knabl, R. Pippan, H. Clemens, V. Maier-Kiener
Mater. Des., 207, ARTN 109848 (2021)

DOI RIS ENW BIB

Enhancement of Interfacial Hydrogen Interactions with Nanoporous Gold-Containing Metallic Glass
Sarac B., Y. Ivanov, M. Micusik, T. Karazehir, B. Putz, S. Dancette, M. Omastova, A. Greer, A. Sarac, J. Eckert
ACS Appl. Mater. Interfaces, 13, 42613-42623 (2021)

DOI RIS ENW BIB

Cryo-Casting for Controlled Decomposition of Cu-Zr-Al Bulk Metallic Glass into Nanomaterials: Implications for Design Optimization
Sarac B., J. Kim, Y. Ivanov, V. Soprunyuk, S. Ketov, W. Schranz, S. Hong, K. Kim, A. Greer, J. Eckert
ACS APPLIED NANO MATERIALS, 4, 7771-7780 (2021)

DOI RIS ENW BIB

First-principles calculations to investigate pressure effect on mechanical and thermal properties of ZrAl2
Tang M., Z.C. Rong, F.X. Li, J.H. Yi, J. Eckert, Y.C. Liu
Comput. Theor. Chem., 1202, ARTN 113304 (2021)

DOI RIS ENW BIB

Mechanochemical Synthesis of Rosin-Modified Montmorillonite: A Breakthrough Approach to the Next Generation of OMMT/Rubber Nanocomposites
Esmaeili E., S. Rounaghi, J. Eckert
NANOMATERIALS, 11, ARTN 1974 (2021)

DOI RIS ENW BIB

Influence of substructures on the selective laser melted Ti-6Al-4V alloy as a function of laser re-melting
Karimi J., M.S. Xie, Z. Wang, K.G. Prashanth
J. Manuf. Process., 68, 1387-1394 (2021)

DOI RIS ENW BIB

Effect of Interlayer Delay on the Microstructure and Mechanical Properties of Wire Arc Additive Manufactured Wall Structures
Singh S., A. Jinoop, G. Tarun Kumar, I. Palani, C. Paul, K. Prashanth
MATERIALS, 14, ARTN 4187 (2021)

DOI RIS ENW BIB

Biomorphic porous Ti6Al4V gyroid scaffolds for bone implant applications fabricated by selective laser melting
Hameed P., C. Liu, R. Ummethala, N. Singh, H. Huang, G. Manivasagam, K. Prashanth
PROGRESS IN ADDITIVE MANUFACTURING, 6, 455-469 (2021)

DOI RIS ENW BIB

Effective Methanol Oxidation with Platinum Nanoparticles-Decorated Poly(2-bromomethyl-2-methyl-3,4-propylenedioxythiophene)-Coated Glassy Carbon Electrode
Karazehir T., B. Sarac, H. Gilsing, J. Eckert, A. Sarac
J. Electrochem. Soc., 168, ARTN 086503 (2021)

DOI RIS ENW BIB

Atomic diffusivities in amorphous and liquid Cu-Zr: Kirkendall effects and dependence on packing density
Ketov S., Y.P. Ivanov, B. Putz, Z. Zhang, J. Eckert, A.L. Greer
Acta Mater., 214, ARTN 116993 (2021)

DOI RIS ENW BIB

Copper and its effects on microstructure and correlated tensile properties of super duplex stainless steels
Ressel G., M. Gsellmann, D. Brandl, A. Landefeld, A. Keplinger, Z.L. Zhang, V. Maier-Kiener, R. Schnitzer
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 821, ARTN 141544 (2021)

DOI RIS ENW BIB

Mechanisms controlling fracture toughness of additively manufactured stainless steel 316L
Kumar D., S. Jhavar, A. Arya, K.G. Prashanth, S. Suwas
Int. J. Fract., 2021, ARTN 574-3 (2021)

DOI RIS ENW BIB

Hardness and failure assessment of a hot extrusion punch during service
Zhang Y., K. Song, S. Zhang, Y. Wang, Z. Zhang
Eng. Fail. Anal., 125, ARTN 105382 (2021)

DOI RIS ENW BIB

Selective Laser Melting of Al-7Si-0.5 Mg-0.5Cu: Effect of Heat Treatment on Microstructure Evolution, Mechanical Properties and Wear Resistance
Wang P., S. Yu, J. Shergill, A. Chaubey, J. Eckert, K. Prashanth, S. Scudino
Acta Metall. Sin.-Engl. Lett., 21, ARTN 01279 (2021)

DOI RIS ENW BIB

Texture dependent strain hardening in additively manufactured stainless steel 316L
Kumar D., G. Shankar, K.G. Prashanth, S. Suwas
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 820, ARTN 141483 (2021)

DOI RIS ENW BIB

Influence of Gradient Residual Stress and Tip Shape on Stress Fields Inside Indented TiN Hard Coating
Todt J., J. Zalesak, C. Krywka, J. Keckes
Adv. Eng. Mater., 2021, ARTN 2100130 (2021)

DOI RIS ENW BIB

Mechanical spectroscopy of metal/polymer composite membranes for hydrogen separation
Zadorozhnyy V., V. Soprunyuk, S. Klyamkin, M. Zadorozhnyy, E. Berdonosova, I. Savvotin, A. Stepashkin, A. Korol, A. Kvaratskheliya, D. Semenov, J. Eckert, S.D. Kaloshkin
J. Alloy. Compd., 866, ARTN 159014 (2021)

DOI RIS ENW BIB

Powder Diffraction Data of Aluminum-Rich FCC-Ti1-xAlxN Prepared by CVD
Endler I., M. Hoehn, B. Matthey, J. Zalesak, J. Keckes, R. Pitonak
COATINGS, 11, ARTN 683 (2021)

DOI RIS ENW BIB

Spark plasma sintering of Ti6Al4V metal matrix composites: Microstructure, mechanical and corrosion properties
Singh N., R. Ummethala, P. Karamched, R. Sokkalingam, V. Gopal, G. Manivasagam, K. Prashanth
J. Alloy. Compd., 865, ARTN 158875 (2021)

DOI RIS ENW BIB

On the behavior of rhenium under high-pressure torsion at room temperature
Panfilov P., T.P. Tolmachev, V.P. Pilyugin, Z. Chen, Z.L. Zhang
Mater. Lett., 292, ARTN 129634 (2021)

DOI RIS ENW BIB

Origin of Electrocatalytic Activity in Amorphous Nickel-Metalloid Electrodeposits
Sarac B., T. Karazehir, M. Micusik, C. Halkali, D. Gutnik, M. Omastova, A.S. Sarac, J. Eckert
ACS Appl. Mater. Interfaces, 13, 23689-23701 (2021)

DOI RIS ENW BIB

Properties of HPT-Processed Large Bulks of p-Type Skutterudite DD0.7Fe3CoSb12 with ZT > 1.3
Rogl G., O. Renk, S. Ghosh, R. Mallik, A. Grytsiv, J. Bursik, E. Schafler, F. Tuomisto, .E. Bauer, P. Rogl
ACS Appl. Energ. Mater., 4, 4831-4844 (2021)

DOI RIS ENW BIB

Electrospun polyacrylonitrile/2-(acryloyloxy)ethyl ferrocenecarboxylate polymer blend nanofibers
Gumrukcu S., V. Soprunyuk, B. Sarac, E. Yuece, J. Eckert, A.S. Sarac
Mol. Syst. Des. Eng., 1, 1 (2021)

DOI RIS ENW BIB

Spark plasma sintering of molybdenum silicides synthesized from oxide precursors
Ovali D., M. Tarraste, M. Kaba, D. Agaogullari, L. Kollo, K.G. Prashanth, M. Ovecoglu
Ceram. Int., 47, 13827-13836 (2021)

DOI RIS ENW BIB

Atomistic understanding of creep and relaxation mechanisms of Cu64Zr36 metallic glass at different temperatures and stress levels
Wu W., D. Sopu, X. Yuan, O. Adjaoud, K.K. Song, J. Eckert
J. Non-Cryst. Solids, 559, ARTN 120676 (2021)

DOI RIS ENW BIB

Additive Manufacturing of Aluminum-Based Metal Matrix Composites-A Review
Tang S., R. Ummethala, C. Suryanarayana, J. Eckert, K. Prashanth, Z. Wang
Adv. Eng. Mater., 2021, ARTN 2100053 (2021)

DOI RIS ENW BIB

Microstructural evolution and mechanical properties of selective laser melted Ti-6Al-4V induced by annealing treatment
Pei W., F. Chen, J. Eckert, S. Pilz, S. Scudino, K.G. Prashanth
J. Cent. South Univ., 28, 1068-1077 (2021)

DOI RIS ENW BIB

Origin of strain hardening in monolithic metallic glasses
Yuan X., D. Sopu, J. Eckert
Phys. Rev. B, 103, ARTN L140107 (2021)

DOI RIS ENW BIB

Self-Reducing Silver Ink on Polyurethane Elastomers for the Manufacture of Thin and Highly Stretchable Electrical Circuits
Krawczyk K.K., J. Groten, O. Glushko, M. Krivec, M. Fruehwirth, G. Schulz, C. Wolf, D. Hartmann, M. Moser, M.J. Cordill, B. Stadlober, T. Griesser
Chem. Mat., 33, 2742-2755 (2021)

DOI RIS ENW BIB

Influence of high-pressure torsion deformation on the corrosion behaviour of a bioresorbable Mg-based alloy studied by positron annihilation
Brunner P., F. Brumbauer, E. Steyskal, O. Renk, A. Weinberg, H. Schroettner, R. Wuerschum
Biomater. Sci., 2021, ARTN: 00166c (2021)

DOI RIS ENW BIB

A universal criterion for the failure threshold in slowly sheared bulk metallic glasses
Luo Y.S., Z. Wang, J. Eckert, J.W. Qiao
J. Appl. Phys., 129, ARTN 155109 (2021)

DOI RIS ENW BIB

Annealing of Al-Zn-Mg-Cu Alloy at High Pressures: Evolution of Microstructure and the Corrosion Behavior
Suo C., P. Ma, Y. Jia, X. Liu, X. Shi, Z. Yu, K. Prashanth
MATERIALS, 14, ARTN 2076 (2021)

DOI RIS ENW BIB

The formation of TiO2/VO2 multilayer structure via directional cationic diffusion
Zheng Y., Z. Chen, H. Lu, Y. Cheng, X. Chen, Y. He, Z. Zhang
Nanoscale, 13, 7783-7791 (2021)

DOI RIS ENW BIB

Influence of Microalloying Elements and Deformation Parameters on the Recrystallization and Precipitation Behavior of Two Low-Alloyed Steels
Monschein S., M. Kapp, D. Zugner, J. Fasching, A. Landefeld, R. Schnitzer
Steel Res. Int., 2021, ARTN 2100065 (2021)

DOI RIS ENW BIB

Effect of Pressure and Temperature on Microstructure of Self-Assembled Gradient AlxTi1-xN Coatings
Zalesak J., J. Todt, J. Michalicka, B. Sartory, I. Matko, M. Lessiak, M. Traxler, R. Weissenbacher, R. Pitonak, C. Gammer, J. Keckes
COATINGS, 11, ARTN 416 (2021)

DOI RIS ENW BIB

Tailoring Extra-Strength of a TWIP Steel by Combination of Multi-Pass Equal-Channel Angular Pressing and Warm Rolling
Abramova M., A. Raab, R. Valiev, A. Khannanova, C. Lee, J. Kim, G. Jang, J. Kim, H. Kim, O. Renk, N. Enikeev
METALS, 11, ARTN 518 (2021)

DOI RIS ENW BIB

Synthesis of bulk reactive Ni-Al composites using high pressure torsion
Renk O., M. Tkadletz, N. Kostoglou, I. Gunduz, K. Fezzaa, T. Sun, A. Stark, C. Doumanidis, J. Eckert, R. Pippan, C. Mitterer, C. Rebholz
J. Alloy. Compd., 857, ARTN 157503 (2021)

DOI RIS ENW BIB

Phase Formation, Microstructure and Mechanical Properties of Mg67Ag33 as Potential Biomaterial
Kosiba K., K. Prashanth, S. Scudino
METALS, 11, ARTN 461 (2021)

DOI RIS ENW BIB

Functionalized highly electron-rich redox-active electropolymerized 3,4-propylenedioxythiophenes as precursors and targets for bioelectronics and supercapacitors
Karazehir T., B. Sarac, H. Gilsing, S. Gumrukcu, J. Eckert, A. Sarac
Mol. Syst. Des. Eng., 6, 214-233 (2021)

DOI RIS ENW BIB

Improved electro-mechanical reliability of flexible systems with alloyed Mo-Ta adhesion layers
Kreiml P., M. Rausch, L. Terziyska, H. Koestenbauer, J. Winkler, C. Mitterer, M. Cordill
Thin Solid Films, 720, ARTN 138533 (2021)

DOI RIS ENW BIB

Correlation between internal states and creep resistance in metallic glass thin films
Li M., J. Tan, X.M. Qin, D.H. Lu, Z.X. Feng, C.J. Li, S.V. Ketov, M. Calin, J. Eckert
J. Appl. Phys., 129, ARTN 085302 (2021)

DOI RIS ENW BIB

Influence of cold rolling on the fatigue crack growth behavior of tungsten
Pillmeier S., S. Zak, R. Pippan, A. Hohenwarter
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 805, ARTN 140791 (2021)

DOI RIS ENW BIB

X-ray Diffraction Computed Nanotomography Applied to Solve the Structure of Hierarchically Phase-Separated Metallic Glass
Stoica M., B. Sarac, F. Spieckermann, J. Wright, C. Gammer, J. Han, P. Gostin, J. Eckert, J. Loeffler
ACS Nano, 15, 2386-2398 (2021)

DOI RIS ENW BIB

Selective laser melting of Ti6Al4V: Effect of laser re-melting
Karimi J., C. Suryanarayana, I. Okulov, K.G. Prashanth
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 805, ARTN 140558 (2021)

DOI RIS ENW BIB

Geometrical model for calculating the effect of surface morphology on total x-ray output of medical x-ray tubes
Siller M., M. Minkkinen, P. Bogust, A. Jelinek, J. Schatte, N. Bostrom, K. Greenland, W. Knabl, H. Clemens, R. Pippan, V. Maier-Kiener
Med. Phys., 2021, ARTN 14649 (2021)

DOI RIS ENW BIB

Adhesion evaluation of thin films to dielectrics in multilayer stacks: A comparison of four-point bending and stressed overlayer technique
Lassnig A., B. Putz, S. Hirn, D.M. Toebbens, C. Mitterer, M.J. Cordill
Mater. Des., 200, ARTN 109451 (2021)

DOI RIS ENW BIB

Effect of alloying elements on hydrogen enhanced decohesion in bcc iron
Kholtobina A., W. Ecker, R. Pippan, V. Razumovskiy
Comput. Mater. Sci., 188, ARTN 110215 (2021)

DOI RIS ENW BIB

Optimization of Mechanical Properties and Damage Tolerance in Polymer-Mineral Multilayer Composites
Wiener J., H. Kaineder, O. Kolednik, F. Arbeiter
MATERIALS, 14, ARTN 725 (2021)

DOI RIS ENW BIB

The Impact Resistance of Highly Densified Metal Alloys Manufactured from Gas-Atomized Pre-Alloyed Powders
Rahmani R., M. Antonov, K. Prashanth
COATINGS, 11, ARTN 216 (2021)

DOI RIS ENW BIB

The S-content-dependent lattice structure evolution and bandgap modulation in quaternary MgZnOS alloy films
Cheng H., L. Li, Y. Wang, Y. Lu, Z. Zhang, M. Li, J. Klar, Y. He
J. Phys. D-Appl. Phys., 54, ARTN 065104 (2021)

DOI RIS ENW BIB

Direct determination of the area function for nanoindentation experiments
Saringer C., M. Tkadletz, M. Kratzer, M. Cordill
J. Mater. Res., 37, ARTN: 43578 (2021)

DOI RIS ENW BIB

High entropy alloy nanocomposites produced by high pressure torsion
Taheriniya S., F. Davani, S. Hilke, M. Hepp, C. Gadelmeier, M. Chellali, T. Boll, H. Rosner, M. Peterlechner, C. Gammer, S. Divinski, B. Butz, U. Glatzel, H. Hahn, G. Wilde
Acta Mater., 208, ARTN 116714 (2021)

DOI RIS ENW BIB

Stress intensity factor for w-shape tension specimens
Kolitsch S., M. Jan, H. Gaenser, O. Kolednik
Eng. Fract. Mech., 242, ARTN 107478 (2021)

DOI RIS ENW BIB

Microstructural Effects on the Interfacial Adhesion of Nanometer-Thick Cu Films on Glass Substrates: Implications for Microelectronic Devices
Lassnig A., V. Terziyska, J. Zalesak, T. Joerg, D. Toebbens, T. Griesser, C. Mitterer, R. Pippan, M. Cordill
ACS APPLIED NANO MATERIALS, 4, 61-70 (2021)

DOI RIS ENW BIB

Composite of medium entropy alloys synthesized using spark plasma sintering
Chawake N., L. Raman, P. Ramasamy, P. Ghosh, F. Spieckermann, C. Gammer, B.S. Murty, R. Kottada, J. Eckert
Scr. Mater., 191, 46-51 (2021)

DOI RIS ENW BIB

Stress-strain behavior and microstructural evolution of ultra-high carbon Fe-C-Cr-V-Mo steel subjected to hot deformation
Wang R., W. Zhang, Y. Li, D. Li, Y. Kang, X. Yang, J. Eckert, Z. Yan
Mater. Charact., 171, ARTN 110746 (2021)

DOI RIS ENW BIB

Core-shell structured NiCo2O4@Ni(OH)(2) nanomaterials with high specific capacitance for hybrid capacitors
Zhao R., D. Cui, H. Sheng, C. Gammer, F. Wu, J. Xiang
Ionics, ARTN 03817 (2021)

DOI RIS ENW BIB

Influence of the nitrogen content on the structure and properties of MoNbTaVW high entropy alloy thin films
Xia A., R. Dedoncker, O. Glushko, M. Cordill, D. Depla, R. Franz
J. Alloy. Compd., 850, ARTN 156740 (2021)

DOI RIS ENW BIB

Controlling the high temperature deformation behavior and thermal stability of ultra-fine-grained W by re alloying
Kappacher J., O. Renk, D. Kiener, H. Clemens, V. Maier-Kiener
J. Mater. Res., 1, ARTN: 43578 (2021)

DOI RIS ENW BIB

Microstructure, strength and fracture toughness of CuNb nanocomposites processed with high pressure torsion using multi-sector disks
Hohenwarter A.
Scr. Mater., 189, 48-52 (2020)

DOI RIS ENW BIB

Influence of combinatorial annealing and plastic deformation treatments on the intrinsic properties of Cu46Zr46Al8 bulk metallic glass
Rezvan A., B. Sarac, V. Soprunyuk, J.T. Kim, K.K. Song, C.J. Li, W. Schranz, J. Eckert
Intermetallics, 127, ARTN 106986 (2020)

DOI RIS ENW BIB

Two-dimensional SnO ultrathin epitaxial films: Pulsed laser deposition growth and quantum confinement effects
Chen J., L. Zheng, W. Yin, M. Zhang, Y. Lu, P. Klar, M. Li, Y. He
Physica B, 599, ARTN 412467 (2020)

DOI RIS ENW BIB

Selective laser melting of high-strength, low-modulus Ti-35Nb-7Zr-5Ta alloy
Ummethala R., P.S. Karamched, S. Rathinavelu, N. Singh, A. Aggarwal, K. Sun, E. Ivanov, L. Kollo, I. Okulov, J. Eckert, K.G. Prashanth
MATERIALIA, 14, ARTN 100941 (2020)

DOI RIS ENW BIB

Phase change memory based on Ta-Sb-Te alloy -Towards a universal memory
Xue Y., Y. Cheng, Y. Zheng, S. Yan, W. Song, S. Lv, S. Song, Z. Song
MATERIALS TODAY PHYSICS, 15, ARTN 100266 (2020)

DOI RIS ENW BIB

Effective electrocatalytic methanol oxidation of Pd-based metallic glass nanofilms
Sarac B., T. Karazehir, Y. Ivanov, B. Putz, A. Greer, A. Sarac, J. Eckert
Nanoscale, 12, 22586-22595 (2020)

DOI RIS ENW BIB

In situ high-energy X-ray diffraction study of thermally -activated martensitic transformation far below room temperature in CuZr-based bulk metallic glass composites
Song K., S. Wu, I. Kaban, M. Stoica, J. Bednarcik, B. Sun, C. Cao, G. Wang, L. Wang, J. Eckert
J. Alloy. Compd., 841, ARTN 155781 (2020)

DOI RIS ENW BIB

A new approach to evaluate the elastic modulus of metallic foils
Trost C.O.W., S. Wurster, C. Freitag, A. Steinberger, M.J. Cordill
Mater. Des., 196, ARTN 109149 (2020)

DOI RIS ENW BIB

The role of crystallographic texture on mechanically induced grain boundary migration
Renk O., P. Ghosh, R.K. Sabat, J. Eckert, R. Pippan
Acta Mater., 200, 404-416 (2020)

DOI RIS ENW BIB

Strain Induced Anisotropic Magnetic Behaviour and Exchange Coupling Effect in Fe-SmCo5 Permanent Magnets Generated by High Pressure Torsion
Weissitsch L., M. Stückler, S. Wurster, P. Knoll, H. Krenn, R. Pippan, A. Bachmaier
Crystals, 10, ARTN 1026 (2020)

DOI RIS ENW BIB

Surface oxidation of nanocrystalline CVD TiB2 hard coatings revealed by cross-sectional nano-analytics and in-situ micro-cantilever testing
Gruber D., J. Zalesak, J. Todt, M. Tkadletz, B. Sartory, J. Suuronen, T. Ziegelwanger, C. Czettl, C. Mitterer, J. Keckes
Surf. Coat. Technol., 399, ARTN 126181 (2020)

DOI RIS ENW BIB

Nanoindentation and microbending analyses of glassy and crystalline Zr (-Hf)-Cu thin-film alloys
Haviar S., T. Kozak, M. Meindlhumer, M. Zitek, K. Opatova, L. Kucerova, J. Keckes, P. Zeman
Surf. Coat. Technol., 399, ARTN 126139 (2020)

DOI RIS ENW BIB

Nanoscale stress distributions and microstructural changes at scratch track cross-sections of a deformed brittle-ductile CrN-Cr bilayer
Meindlhumer M., J. Zalesak, W. Ecker, M. Rosenthal, S. Niese, P. Gawlitza, H. Hruby, C. Mitterer, R. Daniel, J. Keckes, J. Todt
Mater. Des., 195, ARTN 109023 (2020)

DOI RIS ENW BIB

Selective Laser Melting of Aluminum and Its Alloys
Wang Z., R. Ummethala, N. Singh, S. Tang, C. Suryanarayana, J. Eckert, K. Prashanth
MATERIALS, 13, ARTN 4564 (2020)

DOI RIS ENW BIB

Nd3+ ions induced rational morphology control of transition metal oxides for high energy storage performance
Hu H., H. Cheng, K. Song, S. Dai, Y. Liu, H. Stock, Y. Yu, Z. Zhang, M. Liu
J. Power Sources, 472, ARTN 228599 (2020)

DOI RIS ENW BIB

Effect of Carbon in Severe Plastically Deformed Metals
Bachmaier A., R. Pippan, O. Renk
Adv. Eng. Mater., 22, ARTN 2000879 (2020)

DOI RIS ENW BIB

Severe Plastic Deformation and Thermomechanical Processing: Nanostructuring and Properties
Bachmaier A., T. Grosdidier, Y. Ivanisenko
METALS, 10, ARTN 1306 (2020)

DOI RIS ENW BIB

Intrinsic and extrinsic effects on the brittle-to-ductile transition in metallic glasses
Yuan X., D. Sopu, F. Moitzi, K.K. Song, J. Eckert
J. Appl. Phys., 128, ARTN 125102 (2020)

DOI RIS ENW BIB

Effect of TiB(2)particle size on the material transfer behaviour of Cu-TiB(2)composites
Guo X., K. Song, W. Xu, G. Li, Z. Zhang
Mater. Sci. Technol., 36:15, 1685-1694 (2020)

DOI RIS ENW BIB

Multi-scale interface design of strong and damage resistant hierarchical nanostructured materials
Rostilav D., M. Meindlhumer, J. Zalesak, W. Baumegger, J. Todt, T. Ziegelwanger, J.F. Keckes, C. Mitterer, J. Keckes
Mater. Des., 196, ARTN 109169 (2020)

DOI RIS ENW BIB

Atomic-scale study on incoherent twin boundary evolution in nanograined Cu
Zhang Y., J. Guo, W. Ming, J. Chen, Z. Zhang
Scr. Mater., 186, 278-281 (2020)

DOI RIS ENW BIB

In-operando fatigue behavior of gold metallization lines on polyimide substrate
Glushko O., M.J. Cordill
Scr. Mater., 186, 48-51 (2020)

DOI RIS ENW BIB

Thermal stabilization of metal matrix nanocomposites by nanocarbon reinforcements
Bachmaier A., A. Katzensteiner, S. Wurster, K. Aristizabal, S. Suarez, R. Pippan
Scr. Mater., 186, 202-207 (2020)

DOI RIS ENW BIB

Fracture properties of thin film TiN at elevated temperatures
Buchinger J., L. Loefler, J. Ast, A. Wagner, Z. Chen, J. Michler, Z.L. Zhang, P.H. Mayrhofer, D. Holec, M. Bartosik
Mater. Des., 194, ARTN 108885 (2020)

DOI RIS ENW BIB

Verification of the generalised chemical potential for stress-driven hydrogen diffusion in nickel
Drexler A., S. He, V. Razumovskiy, L. Romaner, W. Ecker, R. Pippan
Philos. Mag. Lett., 2020, ARTN 1808253 (2020)

DOI RIS ENW BIB

EBSD characterization of pure and K -doped tungsten fibers annealed at different temperatures
Tanure L., D. Terentyev, V. Nikolic, J. Riesch, K. Verbeken
J. Nucl. Mater., 537, UNSP 152201 (2020)

DOI RIS ENW BIB

Atomic -scale investigation on the structural evolution and deformation behaviors of Cu-Cr nanocrystalline alloys processed by high-pressure torsion
Shao Q., J. Guo, J. Chen, Z. Zhang
J. Alloy. Compd., 832, ARTN 154994 (2020)

DOI RIS ENW BIB

Influence of TiO 2 charge and BSA -metal ion complexation on retention of Cr (VI) in ultrafiltration process
Nayak V., K. Soontarapa, R. Balakrishna, M. Padaki, V.Y. Zadorozhnyy, S.D. Kaloshkin
J. Alloy. Compd., 832, ARTN 153986 (2020)

DOI RIS ENW BIB

Balancing the electro-mechanical and interfacial performance of Mo-based alloy films
Kreiml P., M. Rausch, V. Terziyska, H. Koestenbauer, J. Winkler, C. Mitterer, M. Cordill
MATERIALIA, 12, ARTN 100774 (2020)

DOI RIS ENW BIB

Thermomechanical and structural characterization of polybutadiene/poly(ethylene oxide)/CNT stretchable electrospun fibrousmembranes
Gurbuz R., B. Sarac, V. Soprunyuk, E. Yuece, J. Eckert, A. Ozcan, A.S. Sarac
Polym. Adv. Technol., 2020, 248-261 (2020)

DOI RIS ENW BIB

Balancing the strength and ductility of graphene oxide-carbon nanotube hybrid reinforced aluminum matrix composites with bimodal grain distribution
Xu Z.Y., C.J. Li, Z. Wang, D. Fang, P. Gao, J.M. Tao, J.H. Yi, J. Eckert
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 796, ARTN 140067 (2020)

DOI RIS ENW BIB

Novel intermetallic-reinforced near-alpha Ti alloys manufactured by spark plasma sintering
Wimler D., J. Lindemann, C. Gammer, P. Spoerk-Erdely, A. Stark, H. Clemens, S. Mayer
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 792, ARTN 139798 (2020)

DOI RIS ENW BIB

Achieving work hardening by forming boundaries on the nanoscale in a Ti-based metallic glass matrix composite
Fan J., W. Rao, J. Qiao, P.K. Liaw, D. Sopu, D. Kiener, J. Eckert, G. Kang, Y. Wu
J. Mater. Sci. Technol., 50, 192-203 (2020)

DOI RIS ENW BIB

Mapping the mechanical properties in nitride coatings at the nanometer scale
Zhang Z., Z. Chen, D. Holec, C. Liebscher, N. Koutna, M. Bartosik, Y. Zheng, G. Dehm, P. Mayrhofer
Acta Mater., 194, 343-353 (2020)

DOI RIS ENW BIB

Metallic Glass Films with Nanostructured Periodic Density Fluctuations Supported on Si/SiO(2)as an Efficient Hydrogen Sorber
Sarac B., Y. Ivanov, T. Karazehir, B. Putz, A.L. Greer, A. Sarac, J. Eckert
Chem.-Eur. J., 26, 8244-8253 (2020)

DOI RIS ENW BIB

Fatigue crack threshold analysis of TiAl SENT and CC specimens - Influence of starter notch and precracking
Eck S., J. Maierhofer, C. Tritremmel, H.-P. Gaenser, S. Marsoner, N. Martin, R. Pippan
Intermetallics, 121, ARTN 106770 (2020)

DOI RIS ENW BIB

Extraordinary high-temperature behavior of electrically conductive Hf7B23Si22C6N40 ceramic film
Zeman P., S. Zuzjakova, R. Cerstvy, J. Houska, Y. Shen, J. Todt, J. Jiang, R. Daniel, J. Keckes, E. Meletis I, J. Vlcek
Surf. Coat. Technol., 391, ARTN 125686 (2020)

DOI RIS ENW BIB

Effect of tempering and deep cryogenic treatment on microstructure and mechanical properties of Cr-Mo-V-Ni steel
Yan Z., K. Liu, J. Eckert
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 787, ARTN 139520 (2020)

DOI RIS ENW BIB

The Relationships of Microscopic Evolution to Resistivity Variation of a FIB-Deposited Platinum Interconnector
Zhong C., R. Qi, Y. Zheng, Y. Cheng, W. Song, R. Huang
MICROMACHINES, 11, ARTN 588 (2020)

DOI RIS ENW BIB

Mechanical and optical degradation of flexible optical solar reflectors during simulated low earth orbit thermal cycling
Putz B., S. Wurster, T.E.J. Edwards, B. Voelker, G. Milassin, D.M. Toebbens, C.O.A. Semprimoschnig, M.J. Cordill
Acta Astronaut., 175, 277-289 (2020)

DOI RIS ENW BIB

Microstructural evolution of W-10Re alloys due to thermal cycling at high temperatures and its impact on surface degradation
Siller M., J. Schatte, S. Gerzoskovitz, W. Knabl, R. Pippan, H. Clemens, V. Maier-Kiener
Int. J. Refract. Met. Hard Mat., 92, ARTN 105285 (2020)

DOI RIS ENW BIB

Microscopic Mechanism of Carbon-Dopant Manipulating Device Performance in CGeSbTe-Based Phase Change Random Access Memory
Cheng Y., D. Cai, Y. Zheng, S. Yan, L. Wu, C. Li, W. Song, T. Xin, S. Lv, R. Huang, H. Lv, Z. Song, S. Feng
ACS Appl. Mater. Interfaces, 12, 23051-23059 (2020)

DOI RIS ENW BIB

Hydrogen Trapping in bcc Iron
Kholtobina A., R. Pippan, L. Romaner, D. Scheiber, W. Ecker, V. Razumovskiy
MATERIALS, 13, ARTN 2288 (2020)

DOI RIS ENW BIB

Temperature dependence of surface and grain boundary energies from first principles
Scheiber D., O. Renk, M. Popov, L. Romaner
Phys. Rev. B, 101, ARTN 174103 (2020)

DOI RIS ENW BIB

High pressure torsion induced lowering of Young's modulus in high strength TNZT alloy for bio-implant applications
Maity T., O. Balci, C. Gammer, E. Ivanov, J. Eckert, K.G. Prashanth
J. Mech. Behav. Biomed. Mater., 108, UNSP 103839 (2020)

DOI RIS ENW BIB

Synthesis of nanodiamond reinforced silver matrix nanocomposites: Microstructure and mechanical properties
Katzensteiner A., J.M. Rosalie, R. Pippan, A. Bachmaier
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 782, ARTN 139254 (2020)

DOI RIS ENW BIB

Premature failure of an additively manufactured material
Wang Z., M.: Xie, Y. Li, W. Zhang, C. Yang, L. Kollo, J. Eckert, K. Prashanth
NPG Asia Mater., 12, ARTN 30 (2020)

DOI RIS ENW BIB

Microstructure, Texture, and Strength Development during High-Pressure Torsion of CrMnFeCoNi High-Entropy Alloy
Skrotzki W., A. Pukenas, E. Odor, B. Joni, T. Ungar, B. Voelker, A. Hohenwarter, R. Pippan, E. George
Crystals, 10, ARTN 336 (2020)

DOI RIS ENW BIB

The effect of grain size on the fatigue overload behaviour of nickel
Zhang W., C. Simpson, P. Lopez-Crespo, M. Mokhtarishirazabad, T. Buslaps, R. Pippan, P. Withers
Mater. Des., 189, ARTN 108526 (2020)

DOI RIS ENW BIB

Influence of WC-Co hard metal microstructure on defect density, initiation and propagation kinetics of fatigue cracks starting at intrinsic and artificial defects under a negative stress ratio
Kluensner T., T. Lube, C. Gettinger, L. Walch, R. Pippan
Acta Mater., 188, 30-39 (2020)

DOI RIS ENW BIB

An SEM compatible plasma cell for in situ studies of hydrogen-material interaction
Massone A., A. Manhard, W. Jacob, A. Drexler, W. Ecker, A. Hohenwarter, S. Wurster, D. Kiener
Rev. Sci. Instrum., 91, ARTN 043705 (2020)

DOI RIS ENW BIB

Open-cell tungsten nanofoams: Chloride ion induced structure modification and mechanical behavior
Zhao M., M. Pfeifenberger, D. Kiener
Results Phys., 17, ARTN 103062 (2020)

DOI RIS ENW BIB

Oligoether Ester-Functionalized ProDOT Copolymers on Si/Monolayer Graphene as Capacitive Thin Film Electrodes
Karazehir T., B. Sarac, H. Gilsing, J. Eckert, S. Sarac
J. Electrochem. Soc., 167, ARTN 070543 (2020)

DOI RIS ENW BIB

A Modified Electrochemical Nanoindentation Setup for Probing Hydrogen-Material Interaction Demonstrated on a Nickel-Based Alloy
Ebner A., S. Brinckmann, E. Plesiutschnig, H. Clemens, R. Pippan, V. Maier-Kiener
JOM, 72, 2020-2029 (2020)

DOI RIS ENW BIB

Fatigue crack growth model including load sequence effects - Model development and calibration for railway axle steels
Maierhofer J., H.-P. Gaenser, D. Simunek, M. Leitner, R. Pippan, M. Luke
Int. J. Fatigue, 132, ARTN 105377 (2020)

DOI RIS ENW BIB

Nanoscale evolution of stress concentrations and crack morphology in multilayered CrN coating during indentation: Experiment and simulation
Ecker W., J. Keckes, M. Krobath, J. Zalesak, R. Daniel, M. Rosenthal, J. Todt
Mater. Des., 188, ARTN 108478 (2020)

DOI RIS ENW BIB

Metal flow behavior of P/M connecting rod preform in flashless forging based on isothermal compression and numerical simulation
Li F., P. Chen, J. Han, L. Deng, J. Yi, Y. Liu, J. Eckert
J. Mater. Res. Technol-JMRT, 9, 1200-1209 (2020)

DOI RIS ENW BIB

Strain perceptibility of elements on the diffusion in Zr-based amorphous alloys
Lee A.Y., S.Y. Kim, H. Jang, Y.D. Kim, F. Spieckermann, G. Wilde, J. Eckert, M.H. Lee
Sci Rep, 10, ARTN 4575 (2020)

DOI RIS ENW BIB

Study on Ca Segregation toward an Epitaxial Interface between Bismuth Ferrite and Strontium Titanate
Haselmann U., G. Haberfehlner, W. Pei, M. Popov, L. Romaner, D. Knez, J. Chen, A. Ghasemi, Y. He, G. Kothleitner, Z. Zhang
ACS Appl. Mater. Interfaces, 12, 12264-12274 (2020)

DOI RIS ENW BIB

Fatigue crack growth in full-scale railway axles - Influence of secondary stresses and load sequence effects
Rieger M., C. Moser, P. Brunnhofer, D. Simunek, F. Weber, A. Deisl, H. Gaenser, R. Pippan, N. Enzinger
Int. J. Fatigue, 132, ARTN 105360 (2020)

DOI RIS ENW BIB

Probing defect relaxation in ultra-fine grained Ta using micromechanical spectroscopy
Alfreider M., I. Issa, O. Renk, D. Kiener
Acta Materialia, 185, 309-319 (2020)

DOI RIS ENW BIB

Non-destructive Testing of Thin Birch (Betula pendula Roth.) Veneers
Pramreiter M., A. Stadlmann, F. Linkeseder, J. Keckes, U. Mueller
BioResources, 15, 1265-1281 (2020)

DOI RIS ENW BIB

Stability, elasticity and electronic structures of Co-Zr binary intermetallic compounds
Li K., W. Lu, C. Li, D. Sopu, B. Sarac, J.H. Yi, J. Tan, P. Gao, J. Eckert
Philos. Mag., 2020, ISSN 1478-6435 (2020)

DOI RIS ENW BIB

The effect of anisotropic microstructure on the crack growth and fatigue overload behaviour of ultrafine-grained nickel
Zhang W., C.A. Simpson, T. Leitner, X. Zhang, R. Pippan, P.J. Withers
Acta Mater., 184, 225-240 (2020)

DOI RIS ENW BIB

Sputter deposition of NiW films from a rotatable target
Rausch M., M. Golizadeh, P. Kreiml, M. Cordill, J. Winkler, C. Mitterer
Appl. Surf. Sci., 511, ARTN 145616 (2020)

DOI RIS ENW BIB

Ageing Behaviour of Al-Mg-Si Alloys After Cryogenic and Room Temperature Deformation
Gruber B., F. Grabner, W. Fragner, A. Schökel, F. Spieckermann, P. Uggowitzer, S. Pogatscher
materials, 13, ARTN 13030554 (2020)

DOI RIS ENW BIB

Angular resolved mass-energy analysis of species emitted from a dc magnetron sputtered NiW-target
Rausch M., S. Mraz, P. Kreiml, M. Cordill, J. Schneider, J. Winkler, C. Mitterer
J. Vac. Sci. Technol. A, 38, ARTN 023401 (2020)

DOI RIS ENW BIB

Microstructural evolution during heating of CNT/Metal Matrix Composites processed by Severe Plastic Deformation
Aristizabal K., A. Katzensteiner, A. Bachmaier, F. Muecklich, S. Suarez
Sci Rep, 10:857, ARTN 57946-3 (2020)

DOI RIS ENW BIB

Magnetic dilution by severe plastic deformation
Stückler M., L. Weissitsch, S. Wurster, P. Felfer, H. Krenn, R. Pippan, A. Bachmaier
AIP Advances, 10, ARTN 015210 (2020)

DOI RIS ENW BIB

4-aminophenyl sulfone (APS) as novel monomer in fabricating paper based TFC composite for forward osmosis: Selective layer optimization
Nayak V., J. MS, R. Balakrishna, M. Padaki, V. Zadorozhnyy, S. Kaloshkin
Journal of Environmental Chemical Engineering, 8, ARTN 103664 (2020)

DOI RIS ENW BIB

Microstructures, Mechanical Properties, and Corrosion Behaviors of Refractory High-Entropy ReTaWNbMo Alloys
Yan D., K. Song, H. Sun, S. Wu, K. Zhao, H. Zhang, S. Yuan, J. Kim, N. Chawake, O. Renk, A. Hohenwarter, L. Wang, J. Eckert
J. Mater. Eng. Perform., 29, 399-409 (2020)

DOI RIS ENW BIB

Tailoring ultra-strong nanocrystalline tungsten nanofoams by reverse phase dissolution
Zhao M., I. Issa, M. Pfeifenberger, M. Wurmshuber, D. Kiener
Acta MaterialiaElsevier, 182, 215-225 (2020)

DOI RIS ENW BIB

Inconel-steel multilayers by liquid dispersed metal powder bed fusion: Microstructure, Residual stress and Property Gradients
Bodner S.C., L. van der Vorst, J. Zalesak, J. Todt, J.F. Keckes, V. Maier-Kiener, B. Sartory, N. Schell, J. Hooijmans, J. Saurwalt, J. Keckes
Additive Manufacturing, 32, ARTN 101027 (2019)

DOI RIS ENW BIB

Novel a + b Type Ti-Fe-Cu Alloys Containing Sn with Pertinent Mechanical Properties
Zadorozhnyy V., S. Ketov, T. Wada, S. Wurster, V. Nayak, D. Louzguine-Luzgin, J. Eckert, H. Kato
metals, 10, 1-12 (2019)

DOI RIS ENW BIB

Electrocatalytic Behavior of Hydrogenated Pd-Metallic Glass Nanofilms: Butler-Volmer, Tafel, and Impedance Analyses
Sarac B., T. Karazehir, M. Mühlbacher, A. Darac, J. Eckert
Electrocatalysis, 11, 94-109 (2019)

DOI RIS ENW BIB

Reversing and non-reversing effects of PEEK-HA composites on tuning cooling rate during crystallization
Dey S., S. Chatterjee, F. Spieckermann, P. Ghosh, S. Samanta
J. Polym. Res., 26, ARTN 279 (2019)

DOI RIS ENW BIB

Fatique crack growth in railway axle specimens - Transferability and model validation
Simunek D., M. Leitner, M. Rieger, R. Pippan, H.P. Gänser, F.J. Weber
International Journal of Fatigue, 133, ARTN 105421 (2019)

DOI RIS ENW BIB

Combined Fe and O effects on microstructural evolution and strengthening in Cu-Fe nanocrystalline alloys
Guo J., Q. Shao, O. Renk, L. Li, Y. He, Z. Zhang, R. Pippan
Materials Science & Engineering, 772, ARTN 138800 (2019)

DOI RIS ENW BIB

In situ fabrication of TiC-NiCr cermets by selective laser melting
Aramian A., Z. Sadeghian, K. Prashanth, F. Berto
International Journal of Refractory Metals & Hard Materials, 87, ARTN 105171 (2019)

DOI RIS ENW BIB

Understanding structural evolution of nanostructures during deformation form 2D (3D) Experiments
Renk O., M. Kapp, R. Pippan
IOP Conference SeriesMaterials Science and Engineering, 580, ARTN 012021 (2019)

DOI RIS ENW BIB

Ultrafine-grained Tungsten by High-Pressure Torsion-Bulk precursor versus powder processing route
Wurmshuber M., S. Doppermann, S. Wurster, D. Kiener
IOP Conference Series: Materials Science and Engineering, 580, ARTN 012051 (2019)

DOI RIS ENW BIB

Application of the material inhomogeneity effect for the improvement of fracture toughness of a brittle polymer
Tiwari A., J. Wiener, F. Arbeiter, G. Pinter, Ol Kolednik
Engineering Fracture Mechanics, 224, ARTN 106776 (2019)

DOI RIS ENW BIB

Stress-controlled decomposition routes in cubic AlCrN films assessed by in-situ high-temperature high-energy grazing incidence transmission X-ray diffraction
Meindlhumer M., S. Klima, N. Jäger, A. Stark, H. Hruby, C. Mitterer, J. Keckes, R. Daniel
Scientific ReportsNature, 9, ARTN 18027 (2019)

DOI RIS ENW BIB

Microstructure and stress gradients in TiW thin films characterized by 40 nm X-ray diffraction and transmission electron microscopy
Saghaeian F., J. Keckes, S. Woehlert, M. Rosenthal, M. Reisinger, J. Todt
Thin Solid Films, 691, ARTN 137576 (2019)

DOI RIS ENW BIB

Growth-twins in CrN/AlN multilayers induced by hetero-phase interfaces
Chen Z., Q. Shao, M. Bartosik, P. Mayrhofer, H. Chen, Z. Zhang
Acta Materialia, 185, 157-170 (2019)

DOI RIS ENW BIB

The sputter performance of an industrial-scale planar Mo-target over its lifetime: Target erosion and film properties
Rausch M., A. Sabag, K. Pichler, G. Gruber, J. Köstenbauer, H. Köstenbauer, P. Kreiml, M. Cordill, J. Winkler, C. Mitterer
Surface & Coatings Technology, 381, ARTN 125174 (2019)

DOI RIS ENW BIB

Investigation of high cyclic fatigue behaviour of thin copper films using MEMS structure
Saghaeian F., M. Lederer, A. Hofer, J. Todt, J. Keckes, G. Khatibi
Int. J. Fatigue, 128, ARTN 105179 (2019)

DOI RIS ENW BIB

Effect of Re on microstructural evolution and densification kinetics during spark plasma sintering of nanocrystalline W
Pramanik S., A. Srivastav, B. Jolly, N. Chawake, B.S. Murty
Adv. Powder Technol., 30, 2779-2786 (2019)

DOI RIS ENW BIB

Combined thermo-physical investigations of thin layers with Time Domain Thermoreflectance and Scanning Thermal Microscopy on the example of 500 nm thin, CVD grown tungsten
Fladischer K., V. Leitgeb, L. Mitterhuber, G. Maier, J. Keckes, M. Sagmeister, S. Carniello, S. Defregger
Thermochim. Acta, 681, ARTN 178373 (2019)

DOI RIS ENW BIB

Highly ductile amorphous oxide at room temperature and high strain rate
Frankberg E., J. Kalikka, F. Ferre, L. Joly-Pottuz, T. Salminen, J. Hintikka, M. Hokka, S. Koneti, T. Douillard, B. Le Saint, P. Kreiml, M. Cordill, T. Epicier, D. Stauffer, M. Vanazzi, L. Roiban, J. Akola, F. Di Fonzo, E. Levanen, K. Masenelli-Varlot
Science, 366, 864-869 (2019)

DOI RIS ENW BIB

Bioinspired toughness improvement through soft interlayers in mineral reinforced polypropylene
Wiener J., F. Arbeiter, A. Tiwari, O. Kolednik, G. Pinter
Mechanics of Materials, 1 40, ARTN 103243 (2019)

DOI RIS ENW BIB

Tuneable Magneto-Resistance by Severe Plastic Deformation
Wurster S., L. Weissitsch, M. Stückler, P. Knoll, H. Krenn, R. Pippan, A. Bachmaier
metals, 2019, ARTN 1188 (2019)

DOI RIS ENW BIB

Aluminum matrix composites reinforced with metallic glass particles with core-shell structure
Guan H., C. Li, K. Prashanth, J. Tan, J. Eckert, J. Tao, J. Yi
Materials Science & Engineering, A 771, ARTN 138630 (2019)

DOI RIS ENW BIB

On the Room-Temperature Mechanical Properties of an Ion-Irradiated TiZrNbHfTa Refractory High Entropy Alloy
Moschetti M., A. Xu, B. Schuh, A. Hohenwarter, J.P. Couzinie, J. Kruzic, D. Bhattacharyya, B. Gludovatz
JOM, 2019, ARTN 3861-6 (2019)

DOI RIS ENW BIB

Development of Damage - Tolerant and Fracture-Resistant Materials by Utilizing the Material Inhomogeneity Effect
Kolednik O., R. Kasberger, M. Sistaninia, J. Predan, M. Kegl
ASMEJournal of Applied Mechanics, 86, 111004-1-111004-12 (2019)

DOI RIS ENW BIB

Evolution of Bimodal Microstructure and High-Temperature Wear Resistance of Al-Cu-Ni Alloys
Maity S., D. Chanda, P. Ramasamy, B. Show, J. Eckert, S. Bera
Communication, A, ARTN 5518 (2019)

DOI RIS ENW BIB

Effect of Heterophase Interfaces on Microstructure and Crystallographic Texture Evolution During Rolling of Directionally Solidified Ag-Cu Eutectic Alloy
Li J., J. Li, O. Renk, R. Pippan, P. Ghosh
Metall. Mater. Trans. A-Phys. Metall. Mater. Sci., 51, 368-379 (2019)

DOI RIS ENW BIB

Optimizing the magnetic properties of Fe-based amorphous powder by adjusting atomic structures from vitrification at different temperatures
Kim S., H. Oh, H. Kim, A. Lee, H.-J. Kim, S. Yang, Y. Kim, H. Choi, I. Kim, H.-G. Kim, J. Eckert, J. Kim, M. Lee
Journal of Applied Physics, 126, ARTN 165109 (2019)

DOI RIS ENW BIB

Damage tolerance of lamellar bone
Razi H., J. Predan, F. Fischer, O. Kolednik, P. Fratzl
Bone, 130, ARTN 115102 (2019)

DOI RIS ENW BIB

Point-defect engineering of MoN/TaN superlattice films: A first-principles and experimental study
Koutna N., R. Hahn, J. Zalesak, M. Friak, M. Bartosik, J. Keckes, M. Sob, P. Mayrhofer, D. Holec
Mater. Des., 186, ARTN 108211 (2019)

DOI RIS ENW BIB

High density of genuine growth twins in electrodeposited aluminium
Rafailovic L., C. Gammer, C. Ebner, C. Rentenberger, A. Jovanovic, I. Pasti, N. Skorodumova, H. Karnthaler
Materials Science, 5, eaax3894 (2019)

DOI RIS ENW BIB

Mechanical properties and epitaxial growth of TiN/AlN superlattices
Fallman M., Z. Chen, Z.L. Zhang, P.H. Mayrhofer, M. Bartosik
Surf. Coat. Technol., 375, 1-7 (2019)

DOI RIS ENW BIB

New Developments in Nanomechanical Methods
Wharry J., M. Cordill
JOM, 71, 3340-3342 (2019)

DOI RIS ENW BIB

CROSS-SECTIONAL GRADIENTS OF RESIDUAL STRESSES, MICROSTRUCTURE AND PHASES IN A NITRIDED STEEL REVEALED BY 20 mu m SYNCHROTRON X-RAY DIFFRACTION
Bodner S.C., T. Ziegelwanger, M. Meindlhumer, J. Holcova, J. Todt, N. Schell, J. Keckes
Metall. Ital., 6-10 (2019)

RIS ENW BIB

Hierarchically-structured large superelastic deformation in ferroelastic-ferroelectrics
Deng Y., C. Gammer, J. Ciston, P. Ercius, C. Ophus, K. Bustillo, C. Song, R. Zhang, D. Wu, Y. Du, Z. Chen, H. Dong, A. Khachaturyan, A. Minor
Acta Materialia, 181/2019, 501-509 (2019)

DOI RIS ENW BIB

Au–Sn solders applied in transient liquid phase bonding: Microstructure and mechanical behavior
Du C., R. Soler, B. Völker, K. Matoy, J. Zechner, G. Langer, M. Reisinger, J. Todt, C. Kirchlechner, G. Dehm
Materialia, 8, ARTN 100503 (2019)

DOI RIS ENW BIB

Coiled artificial muscles based on UHMWPE with large muscle stroke
Maksimkin A., I. Larin, D. Chukov, M. Zadorozhnyy, T. Dayyoub, V. Zadorozhnyy, F. Spieckermann, V. Soprunyuk
Materials Today Communications, 21 (2019), ARTN 100688 (2019)

DOI RIS ENW BIB

Microstructural characterization of medium entropy alloy thin films
Chawake N., J. Zalesak, C. Gammer, R. Franz, M. Cordill, J. Kim, J. Eckert
Scripta Materialia, 177, 22-26 (2019)

DOI RIS ENW BIB

Correlation of mechanical damage and electrical behavior of Al/Mo bilayers subjected to bending
Kreiml P., M. Rausch, V. Terziyska, H. Koestenbauer, J. Winkler, C. Mitterer, M. Cordill
Thin Solid Films, 687, UNSP 137480 (2019)

DOI RIS ENW BIB

Water in Mesoporous Confinement: Glass-To-Liquid Transition or Freezing of Molecular Reorientation Dynamics?
Schranz W., V. Soprunyuk
Molecules, 24/2019, ARTN 3563 (2019)

DOI RIS ENW BIB

The Influence of Partial Replacement of Cu with Ga on the Corrosion Behavior of Ti40Zr10Cu36Pd14 Metallic Glasses
Wei Q., P. Gostin, O. Addison, D. Reed, M. Calin, S. Bera, P. Ramasamy, A. Davenport
Journal of The Electrochemical Society, 166, 485-491 (2019)

DOI RIS ENW BIB

Mechanochemical reaction of Al and melamine: a potential approach towards the in situ synthesis of aluminum nitride - carbon nanotube nanocomposites
Rounaghi S., H. Eshghi, S. Scudino, E. Esmaeili, A. Kiani-Rashid, J. Eckert
PCCP, 21, 22121-22131 (2019)

DOI RIS ENW BIB

The creep behavior of a fully lamellar γ-TiAl based alloy
Burtscher M., T. Klein, S. Mayer, H. Clemens, F. Fischer
Intermetallics, 114, ARTN 106611 (2019)

DOI RIS ENW BIB

Microstructure and mechanical property of bimodal-size metallic glass particle-reinforced Al alloy matrix composites
Xie M., Z. Wang, G. Zhang, C. Yang, W. Zhang, K. Prashanth
Journal of Alloys and Compounds, 814, ARTN 152317 (2019)

DOI RIS ENW BIB

Correlating elemental distribution with mechanical properties of TiN/SiNx nanocomposite coatings
Sperr M., Z.L. Zhang, Y.P. Ivanov, P.H. Mayrhofer, M. Bartosik
Scr. Mater., 170, 20-23 (2019)

DOI RIS ENW BIB

Elastic Properties and Stacking Fault Energies of Borides, Carbides and Nitrides from First-Principles Calculations
Zhang Y., Z. Liu, D. Yuan, Q. Shao, J. Chen, C. Wu, Z. Zhang
Acta Metall. Sin.-Engl. Lett., 32, 1099-1110 (2019)

DOI RIS ENW BIB

Friction and Tribo-Chemical Behavior of SPD-Processed CNT-Reinforced Composites
Aristizabal K., A. Tayrac, A. Katzensteiner, A. Bachmaier, S. Suarez
LUBRICANTS, 7, ARTN 75 (2019)

DOI RIS ENW BIB

Mechanical Behavior of Ti6Al4V Scaffolds Filled with CaSiO3 for Implant Applications
Rahmani R., M. Antonov, L. Kollo, Y. Holovenko, Prashanth K.
applied sciences, 2019, ARTN 3844 (2019)

DOI RIS ENW BIB

Investigation of Compatibility Between M-Cr-Al-X Thermal Spray Coatings and Third Generation y-TiAl Alloys
Mazilin I., N. Zaitsev, A. Artamonov, L. Baldaev, V. Zadorozhnyy, M. Gorshenkov, A. Stepashkin, V. Sudarchikov, S. Kaloshkin
Journal of Materials Engineering and Performance, 8, 1059-9495 (2019)

DOI RIS ENW BIB

Effect of lattice surface treatment on performance of hardmetal - titanium interpenetrating phase composites
Holovenko Y., L. Kollo, M. Saarna, R. Rahmani, T. Soloviova, M. Antonov, K. Prashanth, S. Cygan, R. Veinthal
International Journal of Refractory Metals & Hard Materials, 86, ARTN 105087 (2019)

DOI RIS ENW BIB

Tungsten Matrix Composite Reinforced with CoCrFeMnNi High-Entropy Alloy: Impact of Processing Routes on Microstructure and Mechanical Properties
Satyanarayana P., R. Sokkalingam, P. Jena, K. Sivaprasad, K. Prashanth
metals, 9, 12 (2019)

DOI RIS ENW BIB

Fracture behavior and deformation mechanisms in nanolaminated crystalline/amorphous micro-cantilevers
Wang Y., R. Fritz, D. Kiener, J. Zhang, G. Liu, O. Kolednik, R. Pippan, J. Sun
ElsevierActa Materialia, 180 (2019), 73-83 (2019)

DOI RIS ENW BIB

Thermodynamic and mechanical stability of Ni3X-type intermetallic compounds
Kulo N., S. He, W. Ecker, R. Pippan, T. Antretter, V. Razumovskiy
ElsevierIntermetallics, 9 (2019)

DOI RIS ENW BIB

Toughening in nanosilica-reinforced epoxy with tunable filler-matrix interface properties
Picu C., K. Krawczyk, Z. Wang, H. Pishvazadeh-Moghaddam, M. Sieberer, A. Lassnig, W. Kern, A. Hadar, D. Constantinescu
Compos. Sci. Technol., 183, ARTN 107799 (2019)

DOI RIS ENW BIB

Atomic resolution analyses on defects in nanocrystalline Cu-based alloys generated by severe plastic deformation
Zhang Y., Z. Xu, W. Ming, J. Guo, Z. Zhang, J. Chen
Mater. Charact., 157, ARTN 109886 (2019)

DOI RIS ENW BIB

Selective laser melting of 316L stainless steel: Influence of TIB2 addition on microstructure and mechanical properties
Salman O., C. Gammer, J. Eckert, M. Salih, E. Abdulsalam, K. Prashanth, S. Scudino
Materials Today CommunicationsElsevier, 21, 100615 (2019)

DOI RIS ENW BIB

Quasicrystalline Composites by Additive Manufacturing
Prashanth K., S. Scudino
Key Engineering Materials, 818, 72-76 (2019)

DOI RIS ENW BIB

Modulating heterogeneity and plasticity in bulk metallic glasses: Role of interfaces on shear banding
Kosiba K., D. Sopu, S. Scudino, L. Zhang, J. Bednarcik, S. Pauly
Int. J. Plast., 119, 156-170 (2019)

DOI RIS ENW BIB

Investigation of structure and mechanical properties of TiZrHfNiCuCo high entropy alloy thin films synthesized by magnetron sputtering
Kim Y., H. Park, S. Mun, E. Jumaev, S. Hong, G. Song, J. Kim, Y. Park, K. Kim, S. Jeong, Y. Kwon, K. Kim
J. Alloy. Compd., 797, 834-841 (2019)

DOI RIS ENW BIB

20 Hz synchrotron X-ray diffraction analysis in laser-pulsed WC-Co hard metal reveals oscillatory stresses and reversible composite plastification
Gruber D., D. Kiefer, R. Roessler, F. Beckmann, M. Tkadletz, T. Kluensner, C. Czettl, J. Keckes, J. Gibmeier
Int. J. Refract. Met. Hard Mat., 82, 121-128 (2019)

DOI RIS ENW BIB

Evolution of the lattice defects and crystalline domain size in carbon nanotube metal matrix composites processed by severe plastic deformation
Aristizabal K., A. Katzensteiner, M.: Leoni, F. Muecklich, S. Suarez
Mater. Charact., 154, 344-352 (2019)

DOI RIS ENW BIB

Microstructure and mechanical properties of Al-12Si and Al-3.5 Cu-1.5Mg-1Si bimetal fabricated by selective laser melting
Wang P., C. Lao, Z. Chen, Y. Liu, H. Wang, H. Wendrock, J. Eckert, S. Scudino
Journal of Materials Science & Technology, 36, 18-26 (2019)

DOI RIS ENW BIB

Facile preparation of superhydrophobic wood surfaces via spraying of aqueous alkyl ketene dimer dispersions
Arminger B., W. Gindl-Altmutter, J. Keckes, C. Hansmann
RSC ADVANCES, 9, 24357-24367 (2019)

DOI RIS ENW BIB

Compositional tuning-induced permanent color adjustment and mechanical properties: Binary Cu-Mg colored metallic system
Jeong Y., J. Kim, S. Hong, H. Lee, S. Choi, K. Kim
Mater. Des., 175, ARTN 107814 (2019)

DOI RIS ENW BIB

Synthesis of new glassy Mg-Ca-Zn alloys with exeptionally low Young´s Modulus: Exploring near eutectic compositions
Bera S., S. Paul, P. Ramasamy, D. Mandal, M. Das, A. Lassnig, O. Renk, M. Calin, J. Eckert
Scripta MaterialiaScience Direct, 173, 137-143 (2019)

DOI RIS ENW BIB

Resolving the FCC/HCP interfaces of the gamma '(Ag2Al) precipitate phase in aluminium
Zhang Z., J. Rosalie, N. Medhekar, L. Bourgeois
Acta Mater., 174, 116-130 (2019)

DOI RIS ENW BIB

A Novel Setup for In Situ Monitoring of Thermomechanically Cycled Thin Film Metallizations
Moser S., G. Zernatto, M. Kleinbichler, M. Nelhiebel, J. Zechner, M. Cordill, R. Pippan
The Minerals, Metals & Materials SocietyJOM, ARTN: 1543-1851 (2019)

DOI RIS ENW BIB

Face centered cubic titanium in high pressure torsion processed carbon nanotubes reinforced titanium composites
Li F., P. Chen, Z. Chen, P. Hao, J. Yi, K. Prashanth, J. Eckert
ElsevierJournal of Alloys and Compounds, 939-945 (2019)

DOI RIS ENW BIB

Face centered cubic titanium in high pressure torsion processed carbon nanotubes reinforced titanium composites
Li F., P. Chen, Z. Chen, P. Hao, J. Yi, K. Prashanth, J. Eckert
Journal of Alloys and Compounds, 939-945 (2019)

DOI RIS ENW BIB

Evaluation of hydrogen storage perfomance of ZrTiVNiCrFe in electrochemical and gas-solid reactions
Zadorozhnyy V., B. Sarac, E. Berdonosova, T. Karazehir, A. Lassnig, C. Gammer, M. Zadorozhnyy, S. Ketov, S. Klyamkin, J. Eckert
International Journal of Hydrogen Energy, 2019, ARTN 0360-3199 (2019)

DOI RIS ENW BIB

Anisotropy in fracture and fatigue resistance of pearlitic steels and its effect on the crack path
Leitner T., A. Hohenwarter, R. Pippan
Int. J. Fatigue, 124, 528-536 (2019)

DOI RIS ENW BIB

On the onset of deformation twinning in the CrFeMnCoNi high-entropy alloy using a novel tensile specimen geometry
Thurston K., A. Hohenwarter, G. Laplanche, E.P. George, B. Gludovatz, R.O. Ritchie
Intermetallics, 110, UNSP 106469 (2019)

DOI RIS ENW BIB

Comparison of the Dislocation Structure of a CrMnN and a CrNi Austenite after Cyclic Deformation
Fluch R., M. Kapp, K. Spiradek-Hahn, M. Brabetz, H. Holzer, R. Pippan
metals 2019, 9, ARTN 784 (2019)

DOI RIS ENW BIB

Evaluation of the intergranular crack growth resistance of ultrafine grained tungsten materials
Pfeifenberger M., V. Nikolic, S. Zak, A. Hohenwarter, R. Pippan
Actra Materialia, 176, 330-340 (2019)

DOI RIS ENW BIB

Impact of the scanning strategy on the mechanical behavior of 316L steel synthesized by selective laser melting
Salman O., F. Brenne, T. Niendorf, J. Eckert, K. Prashanth, T. He, S. Scudino
Journal of Manufacturing Processes, 255-261 (2019)

DOI RIS ENW BIB

Microstructure and Mechanical Properties of Al-(12-20) Si Bi-Material Fabricated by Selective Laser Melting
Zhang S., P. Ma, Y. Jia, Z. Yu, R. Sokkalingam, X. Shi, P. Ji, J. Eckert, K.G. Prashanth
materials, 12, ARTN 2126 (2019)

DOI RIS ENW BIB

Influence of crystal orientation and Berkovich trip rotation on the mechanical characterization of grain boundaries in molybdenum
Jakob S., A. Leitner, A. Lorich, M. Eidenberger-Schober, W. Knabl, R. Pippan, H. Clemens, V. Maier-Kiener
Materials and Design, 182 (2019), ARTN 107998 (2019)

DOI RIS ENW BIB

Microstructure and Mechanical Properties of Al-(12-20)Si Bi-Material Fabricated by Selective Laser Melting
Zhang S., P. Ma, Y. Jia, Z. Yu, R. Sokkalingam, X. Shi, P. Ji, J. Eckert, K. Prashanth
Materials, 12, ARTN 2126 (2019)

DOI RIS ENW BIB

Microstructure and Failure Characteristics of Nanostructured Molybdenum-Cooper Composites
Schwarz K., J. Rosalie, S. Wurster, R. Pippan, A. Hohenwarter
Advanced Engineering Materials, 2019, ARTN 1900474 (2019)

DOI RIS ENW BIB

Investigation of high cyclic fatigue behaviour of thin copper films using MEMS structure
Saghaeian F., M. Lederer, A. Hofer, J. Todt, J. Keckes, G. Khatibi
Int. Journal of Fatique, 128, ARTN 105179 (2019)

DOI RIS ENW BIB

Stability of the B2 CuZr phase in Cu-Zr-Al-Sc bulk metallic glass matrix composites
Escher B., I. Kaban, U. Kuehn, J. Eckert, S. Pauly
J. Alloy. Compd., 790, 657-665 (2019)

DOI RIS ENW BIB

High-Pressure Torsion Deformation Induced Phase Transformations and Formations: New Material Combinations and Advanced Properties
Bachmaier A., R. Pippan
Materials Transactions, No.7, 1256-1269 (2019)

DOI RIS ENW BIB

The preparation of surfactant-free highly dispersed ethylene glycol-based aluminum nitride-carbon nanofluids for heat transfer application
Esmaeili E., S. Rounaghi, W. Gruner, J. Eckert
Advanced Powder Technology, 30/2019, 2032-2041 (2019)

DOI RIS ENW BIB

Friction welding of electron beam melted Ti-6Al-4V
Qin P.T., R. Damodaram, T. Maity, W.W. Zhang, C. Yang, Z. Wang, K.G. Prashanth
Materials Science & Engineering A, 761, ARTN 138045 (2019)

DOI RIS ENW BIB

In situ analysis of the effect of high heating rates and initial microstructure on the formation and homogeneity of austenite
Eggbauer A., M. Lukas, G. Ressel, P. Prevedel, F. Mendez-Martin, J. Keckes, A. Stark, R. Ebner
J. Mater. Sci., 54, 9197-9212 (2019)

DOI RIS ENW BIB

Investigation of Zr55Cu30Al10Ni5 bulk amorphous alloy crystallization
Sergiienko R., O. Shcheretskyi, V. Zadorozhnyy, A. Verkhovliuk, D. Louzguine-Luzgin
J. Alloy. Compd., 791, 477-482 (2019)

DOI RIS ENW BIB

Micromechanical and microstructural properties of tungsten fibers in the as-produced and annealed state: Assessment of the potassium doping effect
Terentyev D., L. Tanure, A. Bakaeva, A. Dubinko, V. Nikolic, J. Riesch, K. Verbeken, S. Lebediev, E.E. Zhurkin
Int. J. Refract. Met. Hard Mat., 81, 253-271 (2019)

DOI RIS ENW BIB

Characterization of the chips generated by the nanomachining of germanium for X-ray crystal optics
Zaprazny Z., D. Korytar, M. Jergel, Y. Halahovets, M. Kotlar, I. Matko, J. Hagara, P. Siffalovic, J. Keckes, E. Majkova
Int. J. Adv. Manuf. Technol., 102, 2757-2767 (2019)

DOI RIS ENW BIB

Measurement of local strain
Gammer C., M.I. Richard, C. Eberl
MRS Bulletin, Vol. 44/ Issue 6, 459-464 (2019)

DOI RIS ENW BIB

Saturation of Grain Refinement during Severe Plastic Deformation of Single Phase Materials: Reconsiderations, Current Status and Open Questions
Renk O., R. Pippan
Mater. Trans., 60, 1270-1282 (2019)

DOI RIS ENW BIB

The preparation of surfactant-free highly dispersed ethylene glycol-based aluminum nitride-carbon nanofluids for heat transfer application
Esmaeili E., S. Rounaghi, W. Gruner, J. Eckert
Adv. Powder Technol., 30, 2032-2041 (2019)

DOI RIS ENW BIB

Direct measurement of nanostructural change during in situ deformation of a bulk metallic glass
Pekin T., J. Ding, C. Gammer, B. Ozdol, C. Ophus, M. Asta, R.O. Ritchie, A. Minor
Naturenature communications, 2019 (10), 2445 (2019)

DOI RIS ENW BIB

Exceptional fracture resistance of ultrathin metallic glass films due to an intrinsic size effect
Glushko O., M. Muehlbacher, C. Gammer, M.J. Cordill, C. Mitterer, J. Eckert
Scientic Reports, 9, ARTN 8281 (2019)

DOI RIS ENW BIB

An investigation on diffusivity while achieving a cylindrical aluminide coating on metals using simultaneous spark plasma sintering of powers
Chawake N., P. Ghosh, J. Eckert, R.S. Kottada
Scripta Materialia, 170(2019), 156-160 (2019)

DOI RIS ENW BIB

Crack deflecting microstructure for improved electro-mechanical lifetimes of flexible systems
Cordill M.J., T. Joerg, O. Glushko, R. Franz, C. Mitterer
Mater. Lett., 244, 47-49 (2019)

DOI RIS ENW BIB

Effect of TiB2 particles on microstructure and crystallographic texture of Al-12Si fabricated by selective laser melting
Xi L., P. Wang, K.G. Prashanth, H. Li, Prykhodko H., S. Scudino, I. Kaban
J. Alloy. Compd., 786, 551-556 (2019)

DOI RIS ENW BIB

A study on the micro-evolution of mechanical property and microstructures in (Cu-30Fe)-2X alloys with the addition of minor alloying elements
Jeong Y., H. Jo, J.T. Kim, S.H. Hong, K. Kim
J. Alloy. Compd., 786, 341-345 (2019)

DOI RIS ENW BIB

Fracture properties of ultrafine grain chromium correlated to single dislocation processes at room temperature
Issa I., A. Hohenwarter, R. Fritz, D. Kiener
Journal of Materials Research, 2019, 2370-2383 (2019)

DOI RIS ENW BIB

A comparative study of glass-forming ability, crystallization kinetics and mechanical properties of Zr55Co25Al20 and Zr52Co25Al23 bulk metallic glasses
Dong Q., Y.J. Pan, J. Tan, X.M. Qin, C.J. Li, P. Gao, Z.X. Feng, M. Calin, J. Eckert
J. Alloy. Compd., 785, 422-428 (2019)

DOI RIS ENW BIB

Correlating structural and mechanical properties of AlN/TiN superlattice films
Koutna N., P. Kehak, Z. Chen, M. Bartosik, M. Fallmann, M. Cerny, Z. Zhang, M. Friak, M. Sob, P.H. Mayrhofer, D. Holec
Scr. Mater., 165, 159-163 (2019)

DOI RIS ENW BIB

Investigation on the Relationship Between Transition Energy and the Color Change of Cu-M Alloys
Jeong Y., S. Hong, J.T. Kim, H. Park, Y.S. Kim, H.D. Lee, J.K. Lee, S. Mun, Y. Hwang, K. Heo, K. Kim
Met. Mater.-Int., 25, 539-545 (2019)

DOI RIS ENW BIB

Influence of annealing on microstructure and mechanical properties of ultrafine-grained Ti45Nb
Völker B., V. Maier-Kiener, K. Werbach, T. Müller, S. Pilz, M. Calin, J. Eckert, A. Hohenwarter
Materials and Design, 179 (2019), ARTN 107864 (2019)

DOI RIS ENW BIB

New approaches in lowering the gas-phase synthesis temperature of TiO2 nanoparticles by H2O-assisted atmospheric pressure CVS process
Rahiminezhad-Soltani M., K. Saberyan, A. Simchi, C. Gammer
J. Mater. Res. Technol-JMRT, 8, 3024-3035 (2019)

DOI RIS ENW BIB

Hydrogen-enhanced decohesion mechanism of the special E5(0 1 2) [1 0 0] grain boundary in Ni with Mo and C solutes
He S., W. Ecker, R. Pippan, V.I. Razumovskiy
Computational Materials ScienceScience Direct, 167, 100-110 (2019)

DOI RIS ENW BIB

Electron Irradiation Effects on Strength and Ductility of Polymer Foils Studied by Femtosecond Laser-Processed Micro-Tensile Specimens
Pfeifenberger M., G. Milassin, A. Hohenwarter, B. Putz, C.O.A. Semprimoschnig, R. Pippan
Materials, 12, ARTN 1468 (2019)

DOI RIS ENW BIB

Annealing-assisted high-pressure torsion in Zr(55)Cu(30)Al(10)Ni(5 )metallic glass
Sarac B., F. Spieckermann, A. Rezvan, C. Gammer, L. Kraemer, J.T. Kim, J. Keckes, R. Pippan, J. Eckert
J. Alloy. Compd., 784, 1323-1333 (2019)

DOI RIS ENW BIB

Dissimilar welding of Al0.1CoCrFeNi high-entropy alloy and AISI304 stainless steel
Sokkalingam R., V. Muthupandi, K. Sivaprasad, K. Prashanth
Journal of Materials Research, 34, 2683-2694 (2019)

DOI RIS ENW BIB

Initiation and stagnation of room temperature grain coarsening in cyclically strained gold films
Glushko O., G. Dehm
Acta Mater., 169, 99-108 (2019)

DOI RIS ENW BIB

Structure-Property Relationships in Shape Memory Metallic Glass Composites
Sopu D., X. Yuan, F. Moitzi, M. Stoica, J. Eckert
Materials, 12, ARTN 1419 (2019)

DOI RIS ENW BIB

Mechanochemical synthesis and hydrogenation behavior of (TiFe)100-xNix alloys
Zadorozhnyy V., E. Berdonosova, C. Gammer, J. Eckert, M. Zadorozhnyy, A. Bazlov, M. Zheleznyi, S. Kaloshkin, S. Klyamkin
Journal of Alloys and CompoundsElsevierScienceDirect, 796, 42-46 (2019)

DOI RIS ENW BIB

Bioceramic scaffolds by additive manufacturing for controlled delivery of the antibiotic vancomycin
Kamboj N., M. Rodríguez, R. Rahmani, K.G. Prashanth, I. Hassainova
Proceedings of the Estonian Academy of Sciences, 68, 185-190 (2019)

DOI RIS ENW BIB

In-Situ Synchotron Profile Analysis after High-Pressure Torsion Deformation
Kerber M., F. Spieckermann, R. Schuster, B. Joni, N. Schell, E. Schafler
crystalsMDPI, 9, 232 (2019)

DOI RIS ENW BIB

Tuning the glass forming ability and mechanical properties of Ti-based bulk metallic glasses by Ga additions
Bera S., P. Ramasamy, D. Sopu, B. Sarac, Zalesak J., C. Gammer, M. Stoica, M. Calin, J. Eckert
Journal of Alloys and CompoundsElsevierScience Direct, 793, 552-563 (2019)

DOI RIS ENW BIB

Surface structuring by Electron Beam for improved soft tissues adhesion and reduced bacterial contamination on Ti-grade 2
Ferraris S., F. Warchomicka, C. Ramskogler, M. Tortello, A. Cochis, A. Scalia, G.G. di Confiengo, J. Keckes, L. Rimondini, S. Spriano
J. Mater. Process. Technol., 266, 518-529 (2019)

DOI RIS ENW BIB

Gradients of microstructure, stresses and mechanical properties in a multi-layered diamond thin film revealed by correlative cross-sectional nano-analytics
Gruber D.P., J. Todt, N. Woehrl, J. Zalesak, M. Tkadletz, A. Kubec, S. Niese, M. Burghammer, M. Rosenthal, H. Sternschulte, M.J. Pfeifenberger, B. Sartory, J. Keckes
Carbon, 144, 666-674 (2019)

DOI RIS ENW BIB

Deformation behavior of designed dual-phase CuZr metallic glasses
Peng C.X., D. Sopu, Y. Cheng, K.K. Song, S.H. Wang, J. Eckert, L. Wang
Mater. Des., 168, ARTN 107662 (2019)

DOI RIS ENW BIB

Crystallographic orientation dependent maximum layer thickness of cubic AlN in CrN/AlN multilayers
Chen Z., D. Holec, M. Bartosik, P.H. Mayrhofer, Z. Zhang
Acta Mater., 168, 190-202 (2019)

DOI RIS ENW BIB

Toughness enhancement in TiN/WN superlattice thin films
Buchinger J., N. Koutna, Z. Chen, Z. Zhang, P. Mayrhofer, D. Holec, M. Bartosik
Acta Mater., 172, 18-29 (2019)

DOI RIS ENW BIB

The Route to Supercurrent Transparent Ferromagnetic Barriers in Superconducting Matrix
Ivanov Y., S. Soltan, J. Albrecht, E. Goering, G. Schuetz, Z. Zhang, A. Chuvilin
ACS Nano 2019, 13, 5655-5661 (2019)

DOI RIS ENW BIB

Ultrahigh hydrogen-sorbing palladium metallic-glass nanostructures
Sarac B., Y. Ivanov, T. Karazehir, M. Mühlbacher, B. Kaynak, A. Greer, A. Sarac, J. Eckert
Materials Horizons, Communication, 1481-1487 (2019)

DOI RIS ENW BIB

Biomimetic hard and tough nanoceramic Ti-Al-N film with self-assembled six-level hierarchy
Meindlhumer M., J. Zalesak, R. Pitonak, J. Todt, B. Sartory, M. Burghummer, A. Stark, N. Schell, D. Rostislav, J.F. Keckes, M. Lessiak, A. Köpf, R. Weißenbacher, J. Keckes
Nanoscale, 2019,11, 7986-7995 (2019)

DOI RIS ENW BIB

Mechanism of high-pressure torsion-induced shear banding and lamellar thickness saturation in Co-Cr-Fe-Ni-Nb high-entropy composites
Maity T., K. Prashanth, A. Janda, J. Kim, F. Spieckermann, J. Eckert
Journal of Materials Research, 34, 2672-2682 (2019)

DOI RIS ENW BIB

Work hardening in selective laser melted Al-12Si alloy
Gokuldoss P.
Material Design Processing Comm, 1, 2019;e46 (2019)

DOI RIS ENW BIB

Influence of directional microstructure on mechanical properties in Al-based ultrafine bimodal lamellar structured alloy
Kim J.T., S.H. Hong, J. Eckert, K.B. Kim
Mat Design Process Comm., 1, e52 (2019)

DOI RIS ENW BIB

Encapsulation of a gradient Al2O3 layer on hierarchical structured substrate via two-step hybrid processes
Park H., J. Lee, Y. Kim, S. Mun, T. Choi, E. Jumaev, S. Hong, J. Kim, J. Park, K. Kim
Mater. Des., 167, ARTN 107616 (2019)

DOI RIS ENW BIB

Controlling the distribution of structural heterogeneities in severely deformed metallic glass
Bian X.L., D. Zhao, J.T. Kim, D. Sopu, G. Wang, R. Pippan, J. Eckert
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 752, 36-42 (2019)

DOI RIS ENW BIB

Atomic structure evolution of high entropy metallic glass microwires at cryogenic temperature
Yin H., Y. Huang, D. Daisenberg, P. Xue, S. Jiang, W. Ru, S. Jiang, Y. Bao, X. Bian, X. Tong, H. Shen, J. Sun
Scr. Mater., 163, 29-33 (2019)

DOI RIS ENW BIB

Lignin-based multiwall carbon nanotubes
Gindl-Altmutter W., J. Köhnke, C. Unterweger, N. Gierlinger, J. Keckes, J. Zalesak, O. Rojas
Composites Part A, 121, 175-179 (2019)

DOI RIS ENW BIB

Chemical evolution-induced strengthening on AlCoCrNi dual-phase high-entropy alloy with high specific strength
Jumaev E., S.H. Hong, J.T. Kim, H.J. Park, Y.S. Kim, S.Cl Mun, J.Y. Park, G. Song, J.K. Lee, B.H. Min, T. Lee, K.B. Kim
J. Alloy. Compd., 777, 828-834 (2019)

DOI RIS ENW BIB

Rate limiting deformation mechanisms of bcc metals in confined volumes
Kiener D., R. Fritz, M. Alfreider, A. Leitner, R. Pippan, V. Maier-Kiener
Acta Mater., 166, 687-701 (2019)

DOI RIS ENW BIB

Garnet-Polymer Composite Electrolytes: New Insights on Local Li-Ion Dynamics and Electrodeposition Stability with Li Metal Anodes
Zagorski J., J. Miguel Lopez del Amo, M.J. Cordill, F. Aguesse, L. Buannic, A. Llordes
ACS APPLIED ENERGY MATERIALS, 2, 1734-1746 (2019)

DOI RIS ENW BIB

Fast and direct determination of fragility in metallic glasses using chip calorimetry
Spieckermann F., I. Steffny, X. Bian, S. Ketov, M. Stoica, J. Eckert
HELIYON, 5, ARTN e01334 (2019)

DOI RIS ENW BIB

Novel electrical transport properties of native Fe-Nb oxide layers leading to unilateral conductivity of a refractory metallic glass
Trifonov A.S., A. Lubenchenko V, S. Ketov V, S. Taskaev V, D. Louzguine-Luzgin V
HELIYON, 5, ARTN e01424 (2019)

DOI RIS ENW BIB

Compressive and tensile bending of sputter deposited Al/Mo bilayers
Kreiml P., M. Rausch, V. Terziyska, J. Winkler, C. Mitterer, M. Cordill
Scripta Materialia, 162, 367-371 (2019)

DOI RIS ENW BIB

A comparative study on the evolution of microstructure and hardness during monotonic and cyclic high pressure torsion of CoCuFeMnNi high entropy alloy
Sonkusare R., N. Khandelwal, P. Ghosh, K. Biswas, N.P. Gurao
J. Mater. Res., 34, 732-743 (2019)

DOI RIS ENW BIB

Structure-stress relationships in nanocrystalline multilayered Al0.7Cr0.3N/Al0.9Cr0.1N coatings studied by cross-sectional X-ray nanodiffraction
Klima S., N. Jäger, H. Hruby, C. Mitterer, J.F. Keckes, M. Burghammer, R. Daniel
Materials and Design, 170 (2019), 107702 (2019)

DOI RIS ENW BIB

Superior Wear Resitance in EBM-Processed TC4 Alloy Compared with SLM and Forged Samples
Zhang W., P. Qin, Z. Wang, C. Yang, L. Kollo, D. Grzesiak, K.G. Prashanth
materials, 12/5, 782 (2019)

DOI RIS ENW BIB

Hydrogen storage properties of TiFe-based ternary mechanical alloys with cobalt and niobium. A thermochemical approach
Berdonosova E.A., V.Y. Zadorozhnyy, M.Y. Zadorozhnyy, K.V. Geodakian, M.V. Zheleznyi, A.A. Tsarkov, S.D. Kaloshkin, S.N. Klyamkin
International Journal of Hydrogen EnergyElsevierScience Direct, 44, 11233-11240 (2019)

DOI RIS ENW BIB

The influence of crystallization conditions on the macromolecular structure and strength of y-polypropylene
von Baeckmann C., H. Wilhelm, F. Spieckermann, S. Strobel, G. Polt, P. Sowinski, E. Piorkowska, A. Bismarck, M. Zehetbauer
Thermochimica ActaElsevier, 677 (2019), 131-138 (2019)

DOI RIS ENW BIB

Effect of heat treatment on microstructure and mechanical properties of 316L steel synthesized by selective laser melting
Salman O.O., C. Gammer, A.K. Chaubey, J. Eckert, S. Scudino
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 748, 205-212 (2019)

DOI RIS ENW BIB

Tailoring bimodal grain size structures in nanocrystalline compositionally complex alloys to improve ductility
Schuh B., R. Pippan, A. Hohenwarter
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 748, 379-385 (2019)

DOI RIS ENW BIB

Oxygen-mediated deformation and grain refinement in Cu-Fe nanocrystalline alloys
Guo J., M.J. Duarte, Y. Zhang, A. Bachmaier, C. Gammer, G. Dehm, R. Pippan, Z. Zhang
Acta Materialia, 281-293 (2019)

DOI RIS ENW BIB

Estimation of diffusivity from densification data obtained during spark plasma sintering
Chawake N., P. Ghosh, L. Raman, A.K. Srivastav, T. Paul, S.P. Harimkar, J. Eckert, R.S. Kottada
Scr. Mater., 161, 36-39 (2019)

DOI RIS ENW BIB

Design of next-generation alloys for additive manufacturing
Gokuldoss P.
Mat. Design Process Comm., 2019;e50, 1-4 (2019)

DOI RIS ENW BIB

Retardation of Fatigue Crack Growth in Rotating Bending Specimens with Semi-Elliptical Cracks
Leitner M., D. Simunek, J. Maierhofer, H. Gaenser, R. Pippan
Metals, 9, ARTN 156 (2019)

DOI RIS ENW BIB

Analytical and Numerical Crack Growth Analysis of 1:3 Scaled Railway Axle Specimens
Simunek D., M. Leitner, J. Maierhofer, H.P. Gaenser, R. Pippan
Metals, 9, ARTN 184 (2019)

DOI RIS ENW BIB

Benefits of pattern formation by severe plastic deformation
Kulagin R., Y. Beygelzimer, A. Bachmaier, R. Pippan, Y. Estrin
Applied Materials TodayElsevierScience Direct, 236-241 (2019)

DOI RIS ENW BIB

Coexistence of adjacent vacancy-ordered and eutectic phases in Al-Cu-Ni alloys
Maity S., D.K. Chanda, P. Ramasamy, B.K. Show, J. Eckert, S. Bera
Taylor & Francis, 98/2018, 486-493 (2019)

DOI RIS ENW BIB

Polymorphic Transformation and Magnetic Properties of Rapidly Solidified Fe26.7Co26.7Ni26.7Si8.9B11.0 High-Entropy Alloys
Zhang Z., K. Song, R. Li, Q. Xue, S. Wu, D. Yan, X. Li, B. Song, B. Sarac, J.T. Kim, P. Ramasamy, L. Wang, J. Eckert
Materials, 12, ARTN 590 (2019)

DOI RIS ENW BIB

Co-Cr-Mo-C-B metallic glasses with wide supercooled liquid region obtained by systematic adjustment of the metalloid ratio
Kim J.T., S.H. Hong, Y.S. Kim, H.J. Park, T. Maity, N. Chawake, K.G. Prashanth, K.K. Song, W.M. Wang, J. Eckert, K.B. Kim, J.M. Park
Journal of Non-Crystalline Solids, 310-319 (2019)

DOI RIS ENW BIB

Graphene-templated synthesis of palladium nanoplates as novel electrocatalyst for direct methanol fuel cell
Hujiang Y., L. Geng, Y. Zhang, G. Chang, Z. Zhang, X. Liu, M. Lei, Y. He
Applied Surface Science, 385-392 (2019)

DOI RIS ENW BIB

Direct atomic identification of cation migration induced gradual cubic-to-hexagonal phase transition in Ge2Sb2Te5
Zheng Y., Y. Wang, T. Xin, Y. Cheng, R. Huang, P. Liu, M. Luo, Z. Zhang, S. Lv, Z. Song, S. Feng
COMMUNICATIONS CHEMISTRY, 2, ARTN 13 (2019)

DOI RIS ENW BIB

Influence of Processing Parameters on the Mechanical Properties of HPT-deformed Nickel/ Carbon Nanotube composites
Katzensteiner A., T. Müller, K. Kormout, K. Aristizabel, S. Suarez, R. Pippan, A. Bachmaier
Advanced Engineering Materials, 21(1), ARTN 1800422 (2019)

DOI RIS ENW BIB

Study of Cu0 Nanowire Growth on Different Copper Surfaces
Popovski F., S. Ludwikowska, F. Köck, J. Keckes, G. Maier
Scientific Reports, 9, ARTN 37172-8 (2019)

DOI RIS ENW BIB

Characterization of strain bursts in high density polyethylene by means of a novel nano creep test
Wilhelm H., F. Spieckermann, C. Fischer, G. Polt, M. Zehetbauer
International Journal of Plasticity, 116, 297-313 (2019)

DOI RIS ENW BIB

Optimizing mechanical properties of Fe26.7Co26.7Ni26.7Si8.9B11 high entropy alloy by inducing hypoeutectic to quasi-duplex microstructural transition
Zhang Z.Q., K.K. Song, S. Guo, Q.S. Xue, H. Xing, C.D. Cao, F.P. Dai, B. Voelker, A. Hohenwarter, T. Maity, N. Chawake, J.T. Kim, L. Wang, I. Kaban, J. Eckert
Sci Rep, 9, ARTN 360 (2019)

DOI RIS ENW BIB

Bioinspired nacre-like alumina with a bulk-metallic glass-forming alloy as a compliant phase
Wat A., J. In Lee, C.W. Ryu, B. Gludovatz, J. Kim, A.P. Tomsia, T. Ishikawa, J. Schmitz, A. Meyer, M. Alfreider, D. Kiener, E.S. Park, R.O. Ritchie
nature communications, 10, 961 (2019)

DOI Webseite RIS ENW BIB

Electromechanical properties of cathodic arc deposited high entropy alloy thin films on polymer substrates
Xia A., O. Glushko, M.J. Cordill, R. Franz
J. Vac. Sci. Technol. A, 37, ARTN 010601 (2019)

DOI RIS ENW BIB

Localized pore evolution assisted densification during spark plasma sintering of nanocrystalline W-5wt.%Mo alloy
Srivastav A.K., N. Chawake, D. Yadav, N.S. Karthiselva, B.S. Murty
Scr. Mater., 159, 41-45 (2019)

DOI RIS ENW BIB

Influence of cyclic loading on the structure and double-stage structure relaxation behavior of a Zr-Cu-Fe-Al metallic glass
Louzguine-Luzgin D.V., M.Y. Zadorozhnyy, S.V. Ketov, J. Jiang, I.S. Golovin, A.S. Aronin
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 742, 526-531 (2019)

DOI RIS ENW BIB

Nanostructured Metallic Materials and Composites: Processes, Properties and Microstructures
Bachmaier A., A. Hohenwarter, H.W. Hoeppel, J. Ivanisenko
Adv. Eng. Mater., 21, ARTN 1801073 (2019)

DOI RIS ENW BIB

Magnetic Binary Supersaturated Solid Solutions Processed by Severe Plastic Deformation
Stueckler M., H. Krenn, R. Pippan, L. Weissitsch, S. Wurster, A. Bachmaier
Nanomaterials, 9, ARTN 6 (2019)

DOI RIS ENW BIB

High strength nanocrystalline Cu-Co alloys with high tensile ductility
Bachmaier A., G.B. Rathmayr, J. Schmauch, N. Schell, A. Stark, N. De Jonge, R. Pippan
Materials Research, 34 (1), 58-68 (2019)

DOI RIS ENW BIB

Anisotropy of fracture toughness in nanostructured ceramics controlled by grain boundary design
Rostislav D., M. Meindlhumer, W. Baumegger, J. Todt, J. Zalesak, T. Ziegelwanger, C. Mitterer, J. Keckes
Materials and Design, 80-85 (2019)

DOI RIS ENW BIB

Evolution of structure and residual stress of a fcc/hex-A1CrN multi-layered system upon thermal loading revealed by cross-sectional Xray nano-diffraction
Jaeger N., S. Klima, H. Hruby, J. Julin, M. Burghammer, J.F. Keckes, C. Mitterer, R. Daniel
Acta Mater., 162, 55-66 (2019)

DOI RIS ENW BIB

Crack arrest in thin metallic film stacks due to material- and residual stress inhomogeneities
Kozic D., H.-P. Gaenser, R. Brunner, D. Kiener, T. Antretter, O. Kolednik
Thin Solid Films, 668, 14-22 (2018)

DOI RIS ENW BIB

Ultrahigh-strength low carbon steel obtained from the martensitic state via high pressure torsion
Müller T., M.W. Kapp, A. Bachmaier, P. Felfer, R. Pippan
Acta Materialia, 168-177 (2018)

DOI RIS ENW BIB

Oxide induced crack closure in the near threshold regime: The effect of oxide debris release
Maierhofer J., D. Simunek, H.-P. Gaenser, R. Pippan
Int. J. Fatigue, 117, 21-26 (2018)

DOI RIS ENW BIB

Strengthening Effects in Nano-/Ultrafine-Grained Carbon Nanotube Reinforced-Titanium Composites Investigated by Finite Element Modeling
Li F., P. Hao, J. Yi, K.G. Prashanth, T. Maity, J. Eckert
Metall. Mater. Trans. A-Phys. Metall. Mater. Sci., 49A, 6469-6478 (2018)

DOI RIS ENW BIB

Nested sampling, statistical physics and the Potts model
Pfeifenberger M.J., M. Rumetshofer, W. von der Linden
J. Comput. Phys., 375, 368-392 (2018)

DOI RIS ENW BIB

Impact of interfaces on the radiation response and underlying defect recovery mechanisms in nanostructured Cu-Fe-Ag
Wurmshuber M., D. Frazer, A. Bachmaier, Y. Wang, P. Hosemann, D. Kiener
Mater. Des., 160, 1148-1157 (2018)

DOI RIS ENW BIB

Ultrafast Giant Photostriction of Epitaxial Strontium Iridate Film with Superior Endurance
Yang J., Y. Liou, W. Tzeng, H. Liu, Y. Chang, P. Xiang, Z. Zhang, C. Duan, C. Luo, Y. Chen, Y. Chu
Nano Lett., 18, 7742-7748 (2018)

DOI RIS ENW BIB

Mechanical, deformation and fracture behaviors of bulk metallic glass composites reinforced by spherical B2 particles
Hong S.H., J.T. Kim, J.M. Park, G. Song, W.M. Wang, K.B. Kim
Prog. Nat. Sci., 28, 704-710 (2018)

DOI RIS ENW BIB

Structure and mechanical properties of Ti-Based alloys containing Ag subjected to a thermomechanical treatment
Zadorozhnyy V., A. Kopylov, M. Gorshenkov, E. Shabanova, M. Zadorozhnyy, A. Novikov, A. Maksimkin, T. Wada, D.V. Louzguine-Luzgin, H. Kato
Journal of Alloys and Compounds, 1182-1188 (2018)

DOI RIS ENW BIB

Strain-rate dependent occurrence of cleavage fracture in Fe−Si−Al alloys
Kolednik O., A. Umgeher, H. Kreuzer, T. Hebesberger, A. Pichler
Materials Science and Engineering: A, 267-276 (2018)

DOI RIS ENW BIB

Structure and Thermal Properties of an Al-Based Metallic Glass-Polymer Composite
Zadorozhnyy V., M. Churyukanova, A. Stepashkin, M. Zadorozhnyy, A. Sharma, D. Moskovskikh, J. Wang, E. Shabanova, S. Ketov, D. Louzguine-Luzgin, S. Kaloshkin
Metals, 8, met8121037 (2018)

DOI RIS ENW BIB

Fracture mechanics of micro samples: Fundamental considerations
Pippan R., S. Wurster, D. Kiener
Mater. Des., 159, 252-267 (2018)

DOI RIS ENW BIB

Anneal hardening and elevated temperature strain rate sensitivity of nanostructured metals: Their relation to intergranular dislocation accommodation
Renk O., V. Maier-Kiener, I. Issa, J.H. Li, D. Kiener, R. Pippan
Acta Materialia, 409-419 (2018)

DOI RIS ENW BIB

Compressive and tensile bending of sputter deposited Al/Mo bilayers
Kreiml P., M. Rausch, V. Terziyska, J. Winkler, C. Mitterer, M.J. Cordill
Scripta Materialia, 367-271 (2018)

DOI RIS ENW BIB

Removing the oxide layer in a nanostructured aluminum alloy by local shear deformation between nanoscale phases
Wang Z., K.G. Prashanth, W.W. Zhang, S. Scudino, J. Eckert
Powder Technology, 733-737 (2018)

DOI RIS ENW BIB

Sample Size and Strain-Rate-Sensitivity Effects on the Homogeneity of High-Pressure Torsion Deformed Disks
Hohenwarter A., R. Pippan
Metallurgical and Materials Transactions A, 601-608 (2018)

DOI RIS ENW BIB

Mechanical properties of the magnetocaloric intermetallic LaFe11.2Si1.8 alloy at different length scales
Glushko O., A. Funk, V. Maier-Kiener, P. Kraker, M. Krautz, J. Eckert, A. Waske
Acta Materialia, 40-50 (2018)

DOI RIS ENW BIB

Anomalous re-ordering of Fe3Al disordered by high pressure torsion deformation
Gammer C., C. Mangler, H.P. Karnthaler, C. Rentenberger
Scr. Mater., 156, 90-94 (2018)

DOI RIS ENW BIB

Fracture toughness evaluation of UFG tungsten foil
Nikolic V., S. Wurster, D. Firneis, R. Pippan
Int. J. Refract. Met. Hard Mat., 76, 214-225 (2018)

DOI RIS ENW BIB

Deformation characteristics of ultrafine grained and nanocrystalline iron and pearlitic steel - An in situ synchrotron investigation
Ghosh P., K.S. Kormout, U. Lienert, J. Keckes, R. Pippan
Acta Mater., 160, 22-33 (2018)

DOI RIS ENW BIB

Structural and mechanical characterization of heterogeneities in a CuZr-based bulk metallic glass processed by high pressure torsion
Ebner C., B. Escher, C. Gammer, J. Eckert, S. Pauly, C. Rentenberger
Acta Mater., 160, 147-157 (2018)

DOI RIS ENW BIB

The effect of heat treatments on pure and potassium doped drawn tungsten wires: Part II - Fracture properties
Nikolic V., J. Riesch, M. Pfeifenberger, R. Pippan
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 737, 434-447 (2018)

DOI RIS ENW BIB

Constituent constraining effects on the microstructural evolution, ductility, and fracture mode of crystalline/amorphous nanolaminates
Wang Y., D. Kiener, X. Liang, J. Bian, K. Wu, J. Zhang, G. Liu, J. Sun
J. Alloy. Compd., 768, 88-96 (2018)

DOI RIS ENW BIB

Synthesis, characterization and thermodynamic stability of nanostructured ε-iron carbonitride powder prepared by a solid-state mechanochemical route
Rounaghi S.A., D. Vanpoucke, E. Esmaeili, S. Scudino, J. Eckert
Journal of Alloys and Compounds, 327-336 (2018)

DOI RIS ENW BIB

Electro-mechanical behavior of Al/Mo bilayers studied with in situ straining methods
Kreiml P., M. Rausch, V.L. Terziyska, H. Koestenbauer, J. Winkler, C. Mitterer, M.J. Cordill
Thin Solid Films, 665, 131-136 (2018)

DOI RIS ENW BIB

On the stacking fault energy related deformation mechanism of nanocrystalline Cu and Cu alloys: A first-principles and TEM study
Zhang Y., J. Guo, J. Chen, C. Wu, K. Kormout, P. Ghosh, Z. Zhang
Journal of Alloys and Compounds, 807-818 (2018)

DOI RIS ENW BIB

Sputter deposition of Mo-based multicomponent thin films from rotatable targets: Experiment and simulation
Rausch M., M. Pavlovic, P. Kreiml, M.J. Cordill, J. Winkler, C. Mitterer
Appl. Surf. Sci., 455, 1029-1036 (2018)

DOI RIS ENW BIB

Local chemical ordering within the incubation period as a trigger for nanocrystallization of a highly supercooled Ti-based liquid
Wang Z., C. Chen, S. Ketov, K. Akagi, A. Tsarkov, Y. Ikuhara, D. Louzguine-Luzgin
Mater. Des., 156, 504-513 (2018)

DOI RIS ENW BIB

Metallic glass nanolaminates with shape memory alloys
Sopu D., K. Albe, J. Eckert
Acta Mater., 159, 344-351 (2018)

DOI RIS ENW BIB

Comparative investigation of microstructure, mechanical properties and strengthening mechanisms of Al-12Si/TiB2 fabricated by selective laser melting and hot pressing
Xi L.X., H. Zhang, P. Wang, H.C. Li, K.G. Prashanth, K.J. Lin, I. Kaban, D.D. Gu
Ceram. Int., 44, 17635-17642 (2018)

DOI RIS ENW BIB

Enhancing the interface bonding in carbon nanotubes reinforced Al matrix composites by the in situ formation of TiAl3 and TiC
Liu X.Q., C.J. Li, J.H. Yi, K.G. Prashanth, N. Chawake, J.M. Tao, X. You, Y.C. Liu, J. Eckert
J. Alloy. Compd., 765, 98-105 (2018)

DOI RIS ENW BIB

Influence of severe straining and strain rate on the evolution of dislocation structures during micro-/nanoindentation in high entropy lamellar eutectics
Maity T., K.G. Prashanth, O. Balci, J.T. Kim, T. Schoberl, Z. Wang, J. Eckert
Int. J. Plast., 109, 121-136 (2018)

DOI RIS ENW BIB

A simple and versatile machine for creep testing at low loads (6-300 N) and on miniaturized specimens: Application to a Mg-base alloy
Koundinya N.T.B.N., N.E. Kumar, N. Chawake, R. Korla, R.S. Kottada
Rev. Sci. Instrum., 89, ARTN 105102 (2018)

DOI RIS ENW BIB

Activation volume and energy of bulk metallic glasses determined by nanoindentation
Krämer L., V. Maier-Kiener, Y. Champion, B. Sarac, R. Pippan
Mater. Des., 155, 116-124 (2018)

DOI RIS ENW BIB

Strain energy contributions on the bainitic phase transformation in a CrMoV steel during continuous cooling
Reisinger S., E. Kozeschnik, G. Ressel, J. Keckes, A. Stark, S. Marsoner, R. Ebner
Mater. Des., 155, 475-484 (2018)

DOI RIS ENW BIB

Scratch induced thin film buckling for quantitative adhesion measurements
Kleinbichler A., M.J. Pfeifenberger, J. Zechner, S. Woehlert, M.J. Cordill
Mater. Des., 155, 203-211 (2018)

DOI RIS ENW BIB

Plastic deformation mechanisms in severely strained eutectic high entropy composites explained via strain rate sensitivity and activation volume
Maity T., K.G. Prashanth, O. Balci, Z. Wang, Y.D. Jia, J. Eckert
Compos. Pt. B-Eng., 150, 7-13 (2018)

DOI RIS ENW BIB

Pressure-Assisted Sintering of Al-Gd-Ni-Co Amorphous Alloy Powders
Wang Z., K.G. Prashanth, K.B. Surreddi, C. Suryanarayana, J. Eckert, S. Scudino
Materialia, 157-166 (2018)

DOI RIS ENW BIB

Correlation between the atomic configurations and the amorphous-to-icosahedral phase transition in metallic glasses
Geng G., Z. Yan, Y. Hu, Z. Wang, S. Ketov, J. Eckert
J. Mater. Res., 33, 2775-2783 (2018)

DOI RIS ENW BIB

On the microstructure control of the bendability of advanced high strength steels
Suppan C., T. Hebesberger, A. Pichler, J. Rehrl, O. Kolednik
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 735, 89-98 (2018)

DOI RIS ENW BIB

In-situ observations of the fracture and adhesion of Cu/Nb multilayers on polyimide substrates
Cordill M.J., A. Kleinbichler, B. Voelker, P. Kraker, D.R. Economy, D. Toebbens, C. Kirchlechner, M.S. Kennedy
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 735, 456-462 (2018)

DOI RIS ENW BIB

Cooperative deformation behavior between the shear band and boundary sliding of an Al-based nanostructure-dendrite composite
Kim J.T., S.H. Hong, Y.S. Kim, H.J. Park, T. Maity, N. Chawake, X.L. Bian, B. Sarac, J.M. Park, K.G. Prashanth, J.Y. Park, J. Eckert, K.B. Kim
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 735, 81-88 (2018)

DOI RIS ENW BIB

Impact of solute-solute interactions on grain boundary segregation and cohesion in molybdenum
Scheiber D., L. Romaner, R. Pippan, P. Puschnig
PHYSICAL REVIEW MATERIALS, 2, ARTN 093609 (2018)

DOI RIS ENW BIB

High strength nanocrystalline Cu–Co alloys with high tensile ductility
Bachmaier A., G.B. Rathmayr, J. Schmauch, N. Schell, A. Stark, N. de Jonge, R. Pippan
Journal of Materials Research (JMR), 1-11 (2018)

DOI RIS ENW BIB

Microstructural and texture evolution of copper-(chromium, molybdenum, tungsten) composites deformed by high-pressure-torsion
Rosalie J., P. Ghosh, J. Guo, O. Renk, Z. Zhang
Int. J. Refract. Met. Hard Mat., 75, 137-146 (2018)

DOI RIS ENW BIB

Transition from thermally assisted to mechanically driven boundary migration and related apparent activation energies
Renk O., R. Pippan
Scr. Mater., 212-215 (2018)

DOI RIS ENW BIB

Crack Initiation of Printed Lines Predicted with Digital Image Correlation
Katsarelis C., O. Glushko, C. Tonkin, M.S. Kennedy, M.J. Cordill
JOM, 70, 1805-1810 (2018)

DOI RIS ENW BIB

Molecularly grafted, structurally integrated multifunctional polymer thin films with improved adhesion
Lassnig A., N. Nakamura, T. Joerg, B. Reeja-Jayan, M.J. Cordill
Surf. Coat. Technol., 349, 963-968 (2018)

DOI RIS ENW BIB

Influence of phase transformation on the damage tolerance of Ti-Al-N coatings
Bartosik M., H.J. Boehm, C. Krywka, Z.L. Zhang, P.H. Mayrhofer
Vacuum, 155, 153-157 (2018)

DOI RIS ENW BIB

A novel high-strength Al-based nanocomposite reinforced with Ti-based metallic glass nanoparticles produced by powder metallurgye
Zhang W.W., Y. Hu, Z. Wang, C. Yang, G.Q. Zhang, K.G. Prashanth, C. Suryanarayana
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 734, 34-41 (2018)

DOI RIS ENW BIB

The effect of heat treatments on pure and potassium doped drawn tungsten wires: Part I - Microstructural characterization
Nikolic V., J. Riesch, R. Pippan
Materials Science & Engineering A, 422-433 (2018)

DOI RIS ENW BIB

Phase formation, microstructure and deformation behavior of heavily alloyed TiNb- and TiV-based titanium alloys
Okulov I., M. Boenisch, A. Okulov V, A.S. Volegov, H. Attar, S. Ehternam-Haghighi, M. Calin, Z. Wang, A. Hohenwarter, I. Kaban, K.G. Prashanth, J. Eckert
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 733, 80-86 (2018)

DOI RIS ENW BIB

Ultrafine-grained CuAg7Zr0.05 alloy with fully recrystallized microstructure
Tian Y.Z., T. Xiong, S.J. Zheng, Y. Bai, J. Freudenberger, R. Pippan, Z.F. Zhang
Materialia, 162-168 (2018)

DOI RIS ENW BIB

Effect of boron addition on thermal and mechanical properties of Co-Cr-Mo-C-(B) glass-forming alloys
Kim J.T., S.H. Hong, X. Bian, P.K. Gokuldoss, K. Song, J. Eckert, J.M. Park, K.B. Kim
Intermetallics, 99, 1-7 (2018)

DOI RIS ENW BIB

How softwood tree branches are attached to stems: hierarchical extension of Shigo's stem-branch model
Müller U., W. Gindl-Altmutter, J. Keckes
Trees-Struct. Funct., 32, 1113-1121 (2018)

DOI RIS ENW BIB

Correlation between Electrical Transport and Nanoscale Strain in InAs/In0.6Ga0.4As Core-Shell Nanowires
Zeng L., C. Gammer, B. Ozdol, T. Nordqvist, J. Nygard, P. Krogstrup, A.M. Minor, W. Jaeger, E. Olsson
Nano Lett., 18, 4949-4956 (2018)

DOI RIS ENW BIB

Microstructure Evolution in a 6082 Aluminium Alloy during Thermomechanical Treatment
Poletti C., R. Bureau, P. Loidolt, P. Simon, S. Mitsche, M. Spuller
Materials, 11, ARTN 1319 (2018)

DOI RIS ENW BIB

Nanoindentation study of macerals in coals from the Ukrainian Donets Basin
Vranjes S., D. Misch, T. Schöberl, D. Kiener, D. Gross, F.R. Sachsenhofer
Advances in Geosciences (ADGEO), 73-83 (2018)

DOI RIS ENW BIB

Effect of processing temperature on the microstructural characteristics of Cu-Ag nanocomposites: From supersaturation to complete phase decomposition
Kormout K.S., P. Ghosh, A. Bachmaier, A. Hohenwarter, R. Pippan
Acta Mater., 33-44 (2018)

DOI RIS ENW BIB

Insight into the structural evolution during TiN film growth via atomic resolution TEM
Xu Z., Z. Zhang, M. Bartosik, Y. Zhang, P.H. Mayrhofer, Y. He
J. Alloy. Compd., 754, 257-267 (2018)

DOI RIS ENW BIB

In-situ TEM observation of {101¯2} twin-dominated deformation of Mg pillars: Twinning mechanism, size effects and rate dependency
Jeong J., M. Alfreider, R. Konetschnig, D. Kiener, S. Oh
Acta Materialia, 407-421 (2018)

DOI RIS ENW BIB

Metal release and cell biological compatibility of beta-type Ti-40Nb containing indium
Pilz S., A. Gebert, A. Voss, S. Oswald, M. Goettlicher, U. Hempel, J. Eckert, M. Rohnke, J. Janek, M. Calin
J. Biomed. Mater. Res. Part B, 106, 1686-1697 (2018)

DOI RIS ENW BIB

Mechanical Behavior at the Nanoscale: What's in your Toolbox?
Cordill M.J., C.R. Weinberger
JOM, 70, 1065-1067 (2018)

DOI RIS ENW BIB

The cyclic R-curve - Determination, problems, limitations and application
Maierhofer J., S. Kolitsch, R. Pippan, H. Gaenser, M. Madia, U. Zerbst
Eng. Fract. Mech., 198, 45-64 (2018)

DOI RIS ENW BIB

Introduction of Planar High Pressure Torsion (P-HPT) for Fabrication of Nanostructured Sheets
Hohenwarter A., R. Pippan
Adv. Eng. Mater., 20, 1-7 (2018)

DOI RIS ENW BIB

Analytische Betrachtung der Bruchmechanismen in AlSiCu-Gusslegierungen
Papenberg N., S. Bozorgi, R. Pippan
Materialwiss. Werkstofftech., 49, 934-941 (2018)

DOI RIS ENW BIB

Influence of Processing Parameters on the Mechanical Properties of HPT‐Deformed Nickel/Carbon Nanotube Composites
Katzensteiner A., T. Müller, K. Kormout, K. Aristizabal, S. Suarez, R. Pippan, A. Bachmaier
Advanced Engineering Materials (ADV ENG MATER), 1-9 (2018)

DOI RIS ENW BIB

In-situ elastic-plastic fracture mechanics on the microscale by means of continuous dynamical testing
Alfreider M., D. Kozic, O. Kolednik, D. Kiener
Mater. Des., 148, 177-187 (2018)

DOI RIS ENW BIB

Universally scaling Hall-Petch-like relationship in metallic glass matrix composites
Liu Y.Y., P.Z. Liu, J.J. Li, P.K. Liaw, F. Spieckermann, D. Kiener, J.W. Qiao, J. Eckert
Int. J. Plast., 105, 225-238 (2018)

DOI RIS ENW BIB

Microstructural Characterization of a Laser Surface Remelted Cu-Based Shape Memory Alloy
da Silva M., P. Gargarella, W. Wolf, T. Gustmann, C. Kiminami, S. Pauly, J. Eckert, C. Bolfarini
Mater. Res.-Ibero-am. J. Mater., 21, UNSP e20171044 (2018)

DOI RIS ENW BIB

Microstructure and mechanical properties of hierarchical multi-phase composites based on Al-Ni-type intermetallic compounds in the Al-Ni-Cu-Si alloy system
Kim J.T., S.H. Hong, J.M. Park, J. Eckert, K.B. Kim
J. Alloy. Compd., 749, 205-210 (2018)

DOI RIS ENW BIB

Finishing of Ge nanomachined surfaces for X-ray crystal optics
Jergel M., Y. Halahovets, I. Matko, D. Korytar, Z. Zaprazny, J. Hagara, P. Nadazdy, P. Siffalovic, J. Keckes, E. Majkova
Int. J. Adv. Manuf. Technol., 96, 3603-3617 (2018)

DOI RIS ENW BIB

Ductile bulk metallic glass by controlling structural heterogeneities
Scudino S., J.J. Bian, H. Shakur Shahabi, D. Sopu, J. Sort, J. Eckert, G. Liu
Sci Rep, 8, ARTN 9174 (2018)

DOI RIS ENW BIB

Dual self-organised shear banding behaviours and enhanced ductility in phase separating Zr-based bulk metallic glasses
Zhang Z.Q., K.K. Song, B.A. Sun, L. Wang, W.C. Cui, Y.S. Qin, X.L. Han, Q.S. Xue, C.X. Peng, B. Sarac, F. Spieckermann, I. Kaban, J. Eckert
Philos. Mag., 98, 1744-1764 (2018)

DOI RIS ENW BIB

Thermal behavior, structural relaxation and magnetic study of a new Hf-microalloyed Co-based glassy alloy with high thermal stability
Taghvaei A.H., N.G. Shirazifard, P. Ramasamy, J. Bednarcik, J. Eckert
J. Alloy. Compd., 748, 553-560 (2018)

DOI RIS ENW BIB

Multiscale analysis of nanoindentation-induced defect structures in gum metal
Sankaran R.P., V.B. Ozdol, C. Ophus, J. Kacher, C. Gammer, S. Govindjee, A.M. Minor, J.W. Morris Jr.
Acta Mater., 151, 334-346 (2018)

DOI RIS ENW BIB

Understanding the effect of surface flaws on the strength distribution of brittle single crystals
Gruber M., A. Leitner, I. Kraleva, D. Kiener, P. Supancic, R. Bermejo
Journal of the American Ceramic Society, 5705-5716 (2018)

DOI RIS ENW BIB

High Temperature Flow Behavior of Ultra-Strong Nanoporous Au assessed by Spherical Nanoindentation.
Leitner A., V. Maier-Kiener, D. Kiener
Nanomaterials, 1-12 (2018)

DOI RIS ENW BIB

Electrosorption of Hydrogen in Pd-Based Metallic Glass Nanofilms
Sarac B., T. Karazehir, M. Mühlbacher, B. Kaynak, C. Gammer, T. Schöberl, A. Sarac Sezai, J. Eckert
ACS Applied Energy Materials, A-Q (2018)

DOI RIS ENW BIB

Interfacial mutations in the Al-polyimide system
Putz B., G. Milassin, Y. Butenko, B. Voelker, C. Gammer, C. Semprimoschnig, M.J. Cordill
Surf. Interface Anal., 50, 579-586 (2018)

DOI RIS ENW BIB

Room temperature plasticity and phase transformation of nanometer-sized transition alumina nanoparticles under pressure
Issa I., L. Joly-Pottuz, J. Rethore, C. Esnouf, T. Douillard, V. Garnier, J. Chevalier, S. Le Floch, D. Machon, K. Masenelli-Varlot
Acta Mater., 150, 308-316 (2018)

DOI RIS ENW BIB

Influence of Annealing on Microstructure and Mechanical Properties of a Nanocrystalline CrCoNi Medium-Entropy Alloy
Schuh B., B. Voelker, J. Todt, K. Kormout, N. Schell, A. Hohenwarter
Materials, 11, ARTN 662 (2018)

DOI RIS ENW BIB

Lattice Correspondence and Growth Structures of Monoclinic Mg4Zn7 Phase Growing on an Icosahedral Quasicrystal
Singh A., J.M. Rosalie
Crystals, 8, ARTN 194 (2018)

DOI RIS ENW BIB

Electrodeposition of Fe-C Alloys from Citrate Baths: Structure, Mechanical Properties, and Thermal Stability
Müller T., J. Grimwood, A. Bachmaier, R. Pippan
Metals, 8, ARTN 363 (2018)

DOI RIS ENW BIB

Influence of Powder Characteristics on Processability of AlSi12 Alloy Fabricated by Selective Laser Melting
Baitimerov R., P. Lykov, D. Zherebtsov, L. Radionova, A. Shultc, K.G. Prashanth
Materials, 1-14 (2018)

DOI RIS ENW BIB

Nanoindentation creep behavior of Cu–Zr metallic glass films
Gruber M., A. Leitner, D. Kiener, P. Supancic, R. Bermejo
Materials and Design, 221-231 (2018)

DOI RIS ENW BIB

Surface structure and properties of metallic glasses
Louzguine-Luzgin D.V., S. Ketov, A.S. Trifonov, A.Y. Churymov
J. Alloy. Compd., 742, 512-517 (2018)

DOI RIS ENW BIB

Local nanoscale strain mapping of a metallic glass during in situ testing
Gammer C., C. Ophus, T.C. Pekin, J. Eckert, A.M. Minor
Appl. Phys. Lett., 112, ARTN 171905 (2018)

DOI RIS ENW BIB

Nanostructured Low Carbon Steels Obtained from the Martensitic State via Severe Plastic Deformation, Precipitation, Recovery, and Recrystallization
Müller T., A. Bachmaier, A. Stark, N. Schell, R. Pippan
Advanced Engineering Materials, 1-8 (2018)

DOI RIS ENW BIB

Anisotropic elastic properties and phase stability of B2 and B19 CuZr structures under hydrostatic pressure
Li F.X., P.D. Hao, J.H. Yi, D. Sopu, J. Tan, X.Y. Chong, J. Eckert
Intermetallics, 98, 60-68 (2018)

DOI RIS ENW BIB

Fracture toughness of Ti-Si-N thin films
Bartosik M., R. Hahn, Z.L. Zhang, I. Ivanov, M. Arndt, P. Polcik, P.H. Mayrhofer
Int. J. Refract. Met. Hard Mat., 72, 78-82 (2018)

DOI RIS ENW BIB

Microstructure and strength of nano-/ultrafine-grained carbon nanotube-reinforced titanium composites processed by high-pressure torsion
Li F.X., P.D. Hao, J.H. Yi, Z. Chen, K.G. Prashanth, T. Maity, J. Eckert
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 722, 122-128 (2018)

DOI RIS ENW BIB

A heat treatable TiB2/A1-3.5Cu-1.5Mg-1Si composite fabricated by selective laser melting: Microstructure, heat treatment and mechanical properties
Wang P., C. Gammer, F. Brenne, T. Niendorf, J. Eckert, S. Scudino
Composites Part B, 147, 162-168 (2018)

DOI RIS ENW BIB

Origin of large plasticity and multiscale effects in iron-based metallic glasses
Sarac B., Y.P. Ivanov, A. Chuvilin, T. Schoeberl, M. Stoica, Z. Zhang, J. Eckert
Nat. Commun., 9, 1-10 (2018)

DOI RIS ENW BIB

Matching in-situ and ex-situ recorded stress gradients in an AlxGa1 − xN Heterostructure: Complementary wafer curvature analyses in time and space
Reisinger M., C. Ostermaier, M. Tomberger, J. Zechner, B. Sartory, W. Ecker, I. Daumiller, J. Keckes
Scripta Materialia, 147, 50-54 (2018)

DOI RIS ENW BIB

A special purpose Trefftz-element for mode III crack tip loading
Hartmann J., T. Heubrandtner, K. Kunter, R. Pippan, B. Fellner, J.-D. Martinez
Eng. Fract. Mech., 192, 210-224 (2018)

DOI RIS ENW BIB

Effect of composition on the structure of lithium- and manganese-rich transition metal oxides
Shukla A.K., Q.M. Ramasse, C. Ophus, D.M. Kepaptsoglou, F.S. Hage, C. Gammer, C. Bowling, P.A.H. Gallegos, S. Venkatachalam
Energy Environ. Sci., 11, 830-840 (2018)

DOI RIS ENW BIB

Bulk metallic dual phase glasses by severe plastic deformation
Krämer L., Y. Champion, K.S. Kormout, V. Maier-Kiener, R. Pippan
Intermetallics, 94, 172-178 (2018)

DOI RIS ENW BIB

Influence of silicon content on microstructure and mechanical properties of Ti-Cr-Si alloys
Hwang Y.J., S.H. Hong, Y.S. Kim, H.J. Park, Y.B. Jeong, J.T. Kim, K.B. Kim
J. Alloy. Compd., 737, 53-57 (2018)

DOI RIS ENW BIB

In situ nanobeam electron diffraction strain mapping of planar slip in stainless steel
Pekin T.C., C. Gammer, J. Ciston, C. Ophus, A.M. Minor
Scr. Mater., 146, 87-90 (2018)

DOI RIS ENW BIB

Gradient residual strain and stress distributions in a high pressure torsion deformed iron disk revealed by high energy X-ray diffraction
Todt J., J. Keckes, G. Winter, P. Staron, A. Hohenwarter
Scr. Mater., 178-181 (2018)

DOI RIS ENW BIB

Thermomechanical processing of In-containing beta-type Ti-Nb alloys
Pilz S., D. Geissler, M. Calin, J. Eckert, M. Zimmermann, J. Freudenberger, A. Gebert
J. Mech. Behav. Biomed. Mater., 79, 283-291 (2018)

DOI RIS ENW BIB

Additive Manufacturing of a 316L Steel Matrix Composite Reinforced with CeO2 Particles: Process Optimization by Adjusting the Laser Scanning Speed
Salman O., A. Funk, A. Waske, J. Eckert, S. Scudino
TECHNOLOGIES, 6, ARTN 25 (2018)

DOI RIS ENW BIB

Liquid ejection temperature dependence of structure and glass transition behavior for rapidly solidified Zr-Al-M (M=Ni, Cu or Co) ternary glassy alloys
Wang X.H., A. Inoue, J.F. Zhao, F.L. Kong, S.L. Zhu, I. Kaban, M. Stoica, S. Oswald, C. Fan, E. Shalaan, F. Al-Marzouki, J. Eckert, F.X. Yin, Q. Li
J. Alloy. Compd., 739, 1104-1114 (2018)

DOI RIS ENW BIB

Microstructures, Martensitic Transformation, and Mechanical Behavior of Rapidly Solidified Ti-Ni-Hf and Ti-Ni-Si Shape Memory Alloys
Han X.L., K.K. Song, L.M. Zhang, H. Xing, B. Sarac, F. Spieckermann, T. Maity, M. Muehlbacher, L. Wang, I. Kaban, J. Eckert
J. Mater. Eng. Perform., 27, 1005-1015 (2018)

DOI RIS ENW BIB

Review Article: Stress in thin films and coatings: Current status, challenges, and prospects
Abadias G., E. Chason, J. Keckes, M. Sebastiani, G.B. Thompson, E. Barthel, G.L. Doll, C.E. Murray, C.H. Stoessel, L. Martinu
J. Vac. Sci. Technol. A, 36, ARTN 020801 (2018)

DOI RIS ENW BIB

Cross-sectional TEM study of subsurface damage in SPDT machining of germanium optics
Korytar D., Z. Zaprazny, C. Ferrari, C. Frigeri, M. Jergel, I. Matko, J. Keckes
Appl. Optics, 57, 1940-1943 (2018)

DOI RIS ENW BIB

Investigation of Color Change in Cu-Zn Alloys by Reflectivity and Color Difference Analysis
Jeong Y.B., S.H. Hong, H.J. Park, Y.S. Kim, J.T. Kim, H.D. Lee, Y.J. Hwang, Y.H. Lee, K.B. Kim
Korean J. Met. Mater., 56, 171-176 (2018)

DOI RIS ENW BIB

A new device for high-temperature in situ GISAXS measurements
Fritz-Popovski G., S.C. Bodner, F. Sosada-Ludwikowska, G.A. Maier, R. Morak, L. Chitu, L. Bruegemann, J. Lange, H.G. Krane, O. Parise
Rev. Sci. Instrum., 89, ARTN 035103 (2018)

DOI RIS ENW BIB

Martensitic Transformation and Plastic Deformation of TiCuNiZr-Based Bulk Metallic Glass Composites
Sun H., K. Song, X. Han, H. Xing, X. Li, S. Wang, J.T. Kim, N. Chawake, T. Maity, L. Wang, J. Eckert
Metals, 8, ARTN 196 (2018)

DOI RIS ENW BIB

Atomistic origins of the differences in anisotropic fracture behaviour of LiTaO3 and LiNbO3 single crystals
Gruber M., R. Konetschnik, M. Popov, J. Spitaler, P. Supancic, D. Kiener
Acta Materialia, 150, 373-380 (2018)

DOI RIS ENW BIB

In situ atomic-scale observation of oxidation and decomposition processes in nanocrystalline alloys
Guo J., G. Haberfehlner, J. Rosalie, L. Li, M.J. Duarte, G. Kothleitner, G. Dehm, Y. He, R. Pippan, Z. Zhang
Nat. Commun., 9, ARTN 946 (2018)

DOI RIS ENW BIB

An investigation on shear banding and crystallographic texture of Ag–Cu alloys deformed by high-pressure torsion
Ghosh P., K. Kormout, J. Todt, U. Lienert, J. Keckes, R. Pippan
Journal of mechanical science, 1-13 (2018)

DOI RIS ENW BIB

Two-stage cracking of metallic bi-layers on polymer substrates under tension
Putz B., C. May-Miller, V. Matl, B. Völker, D.M. Többens, C. Semprimoschnig, M.J. Cordill
Scripta Materialia, 145, 5-8 (2018)

DOI RIS ENW BIB

Novel synthesis of core-shell Au-Pt dendritic nanoparticles supported on carbon black for enhanced methanol electro-oxidation
Cao R., T. Xia, R. Zhu, Z. Liu, J. Guo, G. Chang, Z. Zhang, X. Liu, Y. He
Appl. Surf. Sci., 433, 840-846 (2018)

DOI RIS ENW BIB

Essential refinements of spherical nanoindentation protocols for the reliable determination of mechanical flow curves
Leitner A., V. Maier-Kiener, Kiener D.
Materials and Design, 146, 69-80 (2018)

DOI RIS ENW BIB

Effects of new beta-type Ti-40Nb implant materials, brain-derived neurotrophic factor, acetylcholine and nicotine on human mesenchymal stem cells of osteoporotic and non osteoporotic donors
Kauschke V., A. Gebert, M. Calin, J. Eckert, S. Scheich, C. Heiss, K.S. Lips
PLoS One, 13, ARTN e0193468 (2018)

DOI RIS ENW BIB

Verification of correlation between densification during spark plasma sintering and compressive creep of ultrafine-grained in-situ Al2O3-reinforced B2 aluminide matrix composites
Chawake N., N.T.B.N. Koundinya, R.S. Kottada
J. Alloy. Compd., 735, 1921-1930 (2018)

DOI RIS ENW BIB

Nanoscale residual stress depth profiling by Focused Ion Beam milling and eigenstrain analysis
Korsunsky A.M., E. Salvati, A.G.J. Lunt, T. Sui, M.Z. Mughal, R. Daniel, J. Keckes, E. Bemporad, M. Sebastiani
Materials and Design, 55-64 (2018)

DOI RIS ENW BIB

Exceptionally high nanoscale wear resistance of a Cu47Zr45Al8 metallic glass with native and artificially grown oxide
Louzguine-Luzgin D.V., M. Ito, S.V. Ketov, A.S. Trifonov, J. Jiang, C.L. Chen, K. Nakajima
Intermetallics, 93, 312-317 (2018)

DOI RIS ENW BIB

Fabrication of Al-Zn solid solution via friction stir processing
Yadav D., R. Bauri, N. Chawake
Mater. Charact., 136, 221-228 (2018)

DOI RIS ENW BIB

On the reinforcement homogenization in CNT/metal matrix composites during severe plastic deformation
Aristizabal K., A. Katzensteiner, A. Bachmaier, F. Muecklich, S. Suarez
Mater. Charact., 375-381 (2018)

DOI RIS ENW BIB

Strain Distribution Across an Individual Shear Band in Real and Simulated Metallic Glasses
Scudino S., D. Sopu
Nano Letters, 18, 1221-1227 (2018)

DOI RIS ENW BIB

Anisotropy in local microstructure - Does it affect the tensile properties of the SLM samples?
Maity T., N. Chawake, J.T. Kim, J. Eckert, K.G. Prashanth
Manufacturing Letters, 15PA, 33-37 (2018)

DOI RIS ENW BIB

Local-structure change rendered by electronic localization-delocalization transition in cerium-based metallic glasses
Luo Q., B. Schwarz, J.C. Swarbrick, J. Bednarcik, Y. Zhu, M. Tang, L. Zheng, R. Li, J. Shen, J. Eckert
Phys. Rev. B, 97, ARTN 064104 (2018)

DOI RIS ENW BIB

Mechanical properties of electrodeposited amorphous/crystalline multilayer structures in the Fe-P system
Müller T., A. Bachmaier, R. Konetschnik, T. Schöberl, R. Pippan
Materials Science & Engineering A, 715, 83-91 (2018)

DOI RIS ENW BIB

Amorphous martensite in beta-Ti alloys
Zhang L., H. Zhang, X. Ren, J. Eckert, Y. Wang, Z. Zhu, T. Gemming, S. Pauly
Nat. Commun., 9, ARTN 506 (2018)

DOI RIS ENW BIB

To the design of highly fracture-resistant composites by the application of the yield stress inhomogeneity effect
Sistaninia M., R. Kasberger, O. Kolednik
Composite Structures, 185, 113-122 (2018)

DOI RIS ENW BIB

Influence of solute effects on the saturation grain size and rate sensitivity in Cu-X alloys
Bruder E., P. Braun, H. Rehman, R.K.W. Marceau, A.S. Taylor, R. Pippan, K. Durst
Scripta Materialia, 144, 5-8 (2018)

DOI RIS ENW BIB

Thermally-triggered Dual In-situ Self-healing Metallic Materials
Kim J.T., H.J. Kim, S.H. Hong, H.J. Park, Y.S. Kim, Y.J. Hwang, Y.B. Jeong, J.-Y. Park, J.M. Park, B. Sarac, W.-M. Wang, J. Eckert, K.B. Kim
Sci Rep, 8, ARTN 2120 (2018)

DOI RIS ENW BIB

Cross-sectional characterization techniques as the basis for knowledge-based design of graded CVD TiN-TiB2 coatings
Tkadletz M., N. Schalk, C. Mitterer, J. Keckes, M. Pohler, C. Czettl
International Journal of Refractory Metals and Hard Materials, 280-284 (2018)

DOI RIS ENW BIB

Elastostatic reversibility in thermally formed bulk metallic glasses: nanobeam diffraction fluctuation electron microscopy
Sarac B., C. Gammer, L. Deng, E. Park, Y. Yokoyama, M. Stoica, J. Eckert
Nanoscale, 10, 1081-1089 (2018)

DOI RIS ENW BIB

High strength nanostructured Al-based alloys through optimized processing of rapidly quenched amorphous precursors
Kim S.-Y., G.-Y. Lee, G.-H. Park, H.-A. Kim, A.-Y. Lee, S. Scudino, Konda Gokuldoss P., D.-H. Kim, J. Eckert, M.-H. Lee
Scientific Reports, 8, ARTN 1090 (2018)

DOI RIS ENW BIB

Precipitate strengthening and thermal stability in three component metallic nanolaminate thin films
Schoeppner R.L., A.A. Taylor, M.J. Cordill, H.M. Zbib, J. Michler, D.F. Bahr
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 485-492 (2018)

DOI RIS ENW BIB

Prediction of the mechanical behaviour of pearlitic steel based on microcompression tests, micromechanical models and homogenization approaches
Ekh M., N. Larijani, E. Dartfeldt, M. Kapp, R. Pippan
Eur. J. Mech. A-Solids, 67, 272-279 (2018)

DOI RIS ENW BIB

Microstructure and mechanical properties of a heat-treatable Al-3.5Cu-1.5Mg-1Si alloy produced by selective laser melting
Wang P., C. Gammer, F. Brenne, K.G. Prashanth, R.G. Mendes, M.H. Ruemmeli, T. Gemming, J. Eckert, S. Scudino
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 711, 562-570 (2018)

DOI RIS ENW BIB

Crack driving forces for short cracks: The effect of work hardening
Kolitsch S., R. Pippan
Eng. Fract. Mech., 187, 262-271 (2018)

DOI RIS ENW BIB

Mechanical and Tribological Properties of Al2O3-TiC Composite Fabricated by Spark Plasma Sintering Process with Metallic (Ni, Nb) Binders
Kumar R., A.K. Chaubey, T. Maity, Konda Gokuldoss P.
Metals, 8, ARTN 50 (2018)

DOI RIS ENW BIB

Influence of Nb on the Microstructure and Fracture Toughness of (Zr0.76Fe0.24)100−xNbx Nano-Eutectic Composites
Maity T., A. Dutta, P.P. Jana, P. Konda Gokuldoss, J. Eckert, J. Das
Materials, 11, ARTN 113 (2018)

DOI RIS ENW BIB

On cryothermal cycling as a method for inducing structural changes in metallic glasses
Ketov S., A.S. Trifonov, Y.P. Ivanov, A. Churyumov, A. Lubenchenko, A. Batrakov, J. Jiang, D. Louzguine-Luzgin, J. Eckert, J. Orava, A. Greer
NPG Asia Materials, 10, 137-145 (2018)

DOI RIS ENW BIB

Influence of severe plastic deformation and specimen orientation on the fatigue crack propagation behavior of a pearlitic steel
Leitner T., G. Trummer, R. Pippan, A. Hohenwarter
Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 710, 260-270 (2018)

DOI RIS ENW BIB

Electrically reversible cracks in an intermetallic film controlled by an electric field
Liu Z.Q., J.H. Liu, M.D. Biegalski, J.-M. Hu, S.L. Shang, Y. Ji, J.M. Wang, S.L. Hsu, A.T. Wong, M.J. Cordill, B. Gludovatz, C. Marker, H. Yan, Z.X. Feng, L. You, M.W. Lin, T.Z. Ward, Z.K. Liu, C.B. Jiang, L.Q. Chen, R.O. Ritchie, H.M. Christen, R. Ramesh
Nat. Commun., ARTN 41 (2018)

DOI RIS ENW BIB

The effect of residual stresses and strain reversal on the fracture toughness of TiAl alloys
Appel F., J.D.H. Paul, P. Staron, M. Oehring, O. Kolednik, J. Predan, F.D. Fischer
Materials Science & Engineering A, 709, 17-29 (2018)

DOI RIS ENW BIB

Nanoindentation creep behavior of Cu–Zr metallic glass films
Wang Y., J. Zhang, K. Wu, G. Liu, D. Kiener, J. Sun
Materials Research Letters, 6, 22-28 (2018)

DOI RIS ENW BIB

Thermodynamic instability of a nanocrystalline, single-phase TiZrNbHfTa alloy and its impact on the mechanical properties
Schuh B., B. Voelker, J. Todt, N. Schell, L. Perriere, J. Li, J.P. Couzinie, A. Hohenwarter
Acta Mater., 142, 201-212 (2018)

DOI RIS ENW BIB

The corrosion resistance in artificial saliva of titanium and Ti-13Nb-13Zr alloy processed by high pressure torsion
Barjaktarevic D., J. Bajat, I. Cvijovic-Alagic, I. Dimic, A. Hohenwarter, V. Dokic, M. Rakin
Procedia Structural Integrity, 13, 1834-1839 (2018)

DOI RIS ENW BIB

Name	Zweck	Speicherdauer	Typ	Anbieter
CookieConsent	Speichert Ihre Einwilligung zur Verwendung von Cookies.	1 Jahr	HTML	Web Consent
fe_typo_user	Ordnet Ihren Browser einer Session auf dem Server zu. Dies beeinflusst nur die Inhalte, die Sie sehen und wird von uns nicht ausgewertet oder weiterverarbeitet.	-	HTTP	Web User

Name	Zweck	Speicherdauer	Typ	Anbieter
_pk_id	Wird verwendet, um ein paar Details über den Benutzer wie die eindeutige Besucher-ID zu speichern.	13 Monate	HTML	Matomo-id
_pk_ref	Wird benutzt, um die Informationen der Herkunftswebsite des Benutzers zu speichern.	6 Monate	HTML	Matomo-ref
_pk_ses	Kurzzeitiges Cookie, um vorübergehende Daten des Besuchs zu speichern.	30 Minuten	HTML	Matomo-ses
_pk_cvar	Kurzzeitiges Cookie, um vorübergehende Daten des Besuchs zu speichern.	30 Minuten	HTML	Matomo-cvar
_pk_hsr	Kurzzeitiges Cookie, um vorübergehende Daten des Besuchs zu speichern.	30 Minuten	HTML	Matomo

Name	Zweck	Speicherdauer	Typ	Anbieter
YouTube	Es wird eine Verbindung mit YouTube hergestellt, um Videos anzuzeigen.	-	Verbindung	YouTube
SoundCloud	Es wird eine Verbindung mit SoundCloud hergestellt, um Audio-Dateien abzuspielen.	-	Verbindung	SoundCloud

Publications 2018

PhD Thesis

PhD Thesis

Conference Papers

Conference Papers

Journal Articles

Journal Articles

Master Thesis

Master Thesis

Other

Other

Secretary Austrian Academy of Sciences:

Secretary University Leoben: