PhD Thesis

  • "Mechanical and Interfacial Integrity of Metal-Polymer Multilayer Systems"

    "Mechanical and Interfacial Integrity of Metal-Polymer Multilayer Systems"
    Putz B.
    (2017)
  • Depth resolved stress gradient and dislocation analyses in III-N multilayer structures

    Depth resolved stress gradient and dislocation analyses in III-N multilayer structures
    Reisinger M.A.
    (2017)
  • "The Role of Interfaces in BCC Metal Plasticity Across Length-Scales and Temperatures"

    "The Role of Interfaces in BCC Metal Plasticity Across Length-Scales and Temperatures"
    Fritz R.
    (2017)
  • "Structural and Mechanical Gradients in Nanostructured Thin Films"

    "Structural and Mechanical Gradients in Nanostructured Thin Films"
    Zalesak J.
    (2017)
  • "Damage Tolerant Design Concepts for the Application of High Strength Materials in Railways Switch Components"

    "Damage Tolerant Design Concepts for the Application of High Strength Materials in Railways Switch Components"
    Kolitsch S.
    (2017)
  • Application of the Configurational Forces Concept for the Design of Tough, Strong and Damage-tolerant Composites

    Application of the Configurational Forces Concept for the Design of Tough, Strong and Damage-tolerant Composites
    Sistaninia M.
    (2017)
  • Structural Instabilities in Nanostructured Metals

    Structural Instabilities in Nanostructured Metals
    Kapp M.
    (2017)
  • Thermo-mechanical Behaviour of Thick Copper Metallizations for Power Electronics

    Thermo-mechanical Behaviour of Thick Copper Metallizations for Power Electronics
    Bigl S.
    (2017)
  • Residual Stresses and Crack Growth in Microelectronic Thin Films

    Residual Stresses and Crack Growth in Microelectronic Thin Films
    Konetschnik R.
    (2017)
  • Fatigue crack growth of noncrystalline and ultrafine-grained metals processed by severe plastic deformation

    Fatigue crack growth of noncrystalline and ultrafine-grained metals processed by severe plastic deformation
    Leitner T.
    (2017)

Conference Papers

  • Laser Ultrasonic Thin Film Characterization of Si-Cu-Al-Cu Multi-Layered Stacks

    Laser Ultrasonic Thin Film Characterization of Si-Cu-Al-Cu Multi-Layered StacksGrünwald E., R. Nuster, G. Paltauf, T. Maier, R. Wimmer-Teubenbacher, R. Konetschnik, D. Kiener, V. Leitgeb, A. Köck, R. BrunnerMaterials Today: Proceedings4, 7122-7127 (2017)
  • Evolution of the microstructure in carbon nanotube reinforced Nickel matrix composites processed by high-pressure torsion

    Evolution of the microstructure in carbon nanotube reinforced Nickel matrix composites processed by high-pressure torsionAristizabal K., S. Suárez, A. Katzensteiner, A. Bachmaier, F. Mücklich, ARTN 012008 (2017)
  • Finite element modeling of the residual stress evolution in forged and direct-aged alloy 718 turbine disks during manufacturing and its experimental validation

    Finite element modeling of the residual stress evolution in forged and direct-aged alloy 718 turbine disks during manufacturing and its experimental validationDrexler A., W. Ecker, R. Hessert, B. Oberwinkler, H.-P. Gänser, J. Keckes, M. Hofmann, A. Fischersworring-Bunk, ARTN 070001 (2017)
  • Pt nanoparticles modified Au dendritic nanostructures: Facile synthesis and enhanced electrocatalytic performance for methanol oxidation

    Pt nanoparticles modified Au dendritic nanostructures: Facile synthesis and enhanced electrocatalytic performance for methanol oxidationJia H., G. Chang, H. Shu, M. Xu, X. Wang, Z. Zhang, X. Liu, H. He, K. Wang, R. Zhu, Y. HeInt. J. Hydrog. Energy42, 22100-22107 (2017)
  • Micro-Mechanical In Situ Measurements in Thin Film Systems Regarding the Determination of Residual Stress, Fracture Properties and Interface Toughness

    Micro-Mechanical In Situ Measurements in Thin Film Systems Regarding the Determination of Residual Stress, Fracture Properties and Interface ToughnessKonetschnik R., D. Kiener, D. Kozic, H.-P. Gänser, R. Brunner, 750-751 (2017)
  • From an understanding of structural restoration mechanisms towards a selective processing of extreme nanolamellar structures

    From an understanding of structural restoration mechanisms towards a selective processing of extreme nanolamellar structuresRenk O., P. Ghosh, R. Pippan (2017)
  • Strength and ductility of heavily deformed pearlitic microstructures

    Strength and ductility of heavily deformed pearlitic microstructuresHohenwarter A., M.W. Kapp, B. Völker, O. Renk, R. Pippan, ARTN 012003 (2017)
  • Role of interfaces on microstructure refinement and mechanical properties of severe plastically deformed copper and copper-silver eutectic

    Role of interfaces on microstructure refinement and mechanical properties of severe plastically deformed copper and copper-silver eutecticGhosh P., K.S. Kormout, R. Pippan, ARTN 012021 (2017)
  • Crack closure and retardation effects – experiments and modelling

    Crack closure and retardation effects – experiments and modellingMaierhofer J., H.-P. Gänser, R. PippanProcedia Structural Integrity4, 19-26 (2017)

Journal Articles

  • Microstructural influence on the cyclic electro-mechanical behaviour of ductile films on polymer substrates

    Microstructural influence on the cyclic electro-mechanical behaviour of ductile films on polymer substrates
    Cordill M.J., O. Glushko, A. Kleinbichler, B. Putz, D.M. Toebbens, C. Kirchlechner
    Thin Solid Films, 644, 166-172 (2017)
  • Influence of solid solution strengthening on the local mechanical properties of single crystal and ultrafine-grained binary Cu–AlX solid solutions

    Influence of solid solution strengthening on the local mechanical properties of single crystal and ultrafine-grained binary Cu–AlX solid solutions
    Maier-Kiener V., X. An, L. Li, Z. Zhang, R. Pippan, K. Durst
    Journal of Materials Research, 32, 4583-4591 (2017)
  • Strain dependence of diffusion in Zr-based bulk amorphous alloy

    Strain dependence of diffusion in Zr-based bulk amorphous alloy
    Lee A.-Y., J.-K. Song, H.-R. Oh, H. Kim, S.-Y. Kim, A.-R. Kwon, E.-S. Park, C.-H. Lim, J. Eckert, M.-H. Lee
    JOURNAL OF APPLIED PHYSICS, 122, ARTN 245105 (2017)
  • Powder metallurgy of Al-based composites reinforced with Fe-based glassy particles: Effect of microstructural modification

    Powder metallurgy of Al-based composites reinforced with Fe-based glassy particles: Effect of microstructural modification
    Balci Ö., P. Konda Gokuldoss, S. Scudino, M. Somer, J. Eckert
    Particulate Science and Technology, 1-6 (2017)
  • Combined TEM and XPS studies of metal - polymer interfaces for space applications

    Combined TEM and XPS studies of metal - polymer interfaces for space applications
    Putz B., G. Milassin, Y. Butenko, B. Völker, C. Gammer, C. Semprimoschnig, M.J. Cordill
    Surface and Coatings Technology, 332, 368-375 (2017)
  • Annealing effects on the film stress and adhesion of tungsten-titanium barrier layers

    Annealing effects on the film stress and adhesion of tungsten-titanium barrier layers
    Kleinbichler A., J. Todt, J. Zechner, S. Wöhlert, D.M. Többens, M.J. Cordill
    Surface and Coatings Technology, 332, 376-381 (2017)
  • Inkjet Printed Wiring Boards with Vertical Interconnect Access on Flexible, Fully Compostable Cellulose Substrates

    Inkjet Printed Wiring Boards with Vertical Interconnect Access on Flexible, Fully Compostable Cellulose Substrates
    Samusjew A., A. Lassnig, M.J. Cordill, K.K. Krawczyk, T. Griesser
    Advanced Materials Technologies, 2017, ARTN 1700250 (2017)
  • Effect of Multiple Alloying Elements on the Glass-Forming Ability, Thermal Stability, and Crystallization Behavior of Zr-Based Alloys

    Effect of Multiple Alloying Elements on the Glass-Forming Ability, Thermal Stability, and Crystallization Behavior of Zr-Based Alloys
    Bazlov A.I., A.A. Tsarkov, S.V. Ketov, C. Suryanarayana, D.V. Louzguine-Luzgin
    Metallurgical and Materilas Transactions A (2017)
  • Interface and stability analysis of Tantalum- and Titanium nitride thin films onto Lithiumniobate

    Interface and stability analysis of Tantalum- and Titanium nitride thin films onto Lithiumniobate
    Vogel U., S. Oswald, J. Eckert
    Appl. Surf. Sci., 425, 254-260 (2017)
  • Designing a multifunctional Ti-2Cu-4Ca porous biomaterial with favorable mechanical properties and high bioactivity

    Designing a multifunctional Ti-2Cu-4Ca porous biomaterial with favorable mechanical properties and high bioactivity
    Zhang L., Z.Y. He, J. Tan, M. Calin, K.G. Prashanth, B. Sarac, B. Voelker, Y.H. Jiang, R. Zhou, J. Eckert
    J. Alloy. Compd., 727, 338-345 (2017)
  • Influence of spherical particles and interfacial stress distribution on viscous flow behavior of Ti-Cu-Ni-Zr-Sn bulk metallic glass composites

    Influence of spherical particles and interfacial stress distribution on viscous flow behavior of Ti-Cu-Ni-Zr-Sn bulk metallic glass composites
    Hong S.H., J.T. Kim, S.C. Mun, Y.S. Kim, H.J. Park, Y.S. Na, K.R. Lim, J.M. Park, K.B. Kim
    Intermetallics, 91, 90-94 (2017)
  • High-throughput study of binary thin film tungsten alloys

    High-throughput study of binary thin film tungsten alloys
    Nikolic V., S. Wurster, A. Savan, A. Ludwig, R. Pippan
    Int. J. Refract. Met. Hard Mat., 69, 40-48 (2017)
  • Study of the structural defects on carbon nanotubes in metal matrix composites processed by severe plastic deformation

    Study of the structural defects on carbon nanotubes in metal matrix composites processed by severe plastic deformation
    Aristizabal K., A. Katzensteiner, A. Bachmaier, F. Muecklich, S. Suarez
    Carbon, 125, 156-161 (2017)
  • A combined experimental and theoretical investigation of the Al-Melamine reactive milling system: A mechanistic study towards AlN-based ceramics

    A combined experimental and theoretical investigation of the Al-Melamine reactive milling system: A mechanistic study towards AlN-based ceramics
    Rounaghi S.A., D.E.P. Vanpoucke, H. Eshghi, S. Scudino, E. Esmaeili, S. Oswald, J. Eckert
    J. Alloy. Compd., 729, 240-248 (2017)
  • Powder metallurgical processing of low modulus beta-type Ti-45Nb to bulk and macro-porous compacts

    Powder metallurgical processing of low modulus beta-type Ti-45Nb to bulk and macro-porous compacts
    Schmidt R., S. Pilz, I. Lindemann, C. Damm, J. Hufenbach, A. Helth, D. Geissler, A. Henss, M. Rohnke, M. Calin, M. Zimmermann, J. Eckert, M.H. Lee, A. Gebert
    Powder Technol., 322, 393-401 (2017)
  • Phase evolution and carbon redistribution during continuous tempering of martensite studied with high resolution techniques

    Phase evolution and carbon redistribution during continuous tempering of martensite studied with high resolution techniques
    Vieweg A., E. Povoden-Karadeniz, G. Ressel, P. Prevedel, T. Wojcik, F. Mendez-Martin, A. Stark, J. Keckes, E. Kozeschnik
    Mater. Des., 136, 214-222 (2017)
  • Optimization of the Hot Forging Processing Parameters for Powder Metallurgy Fe-Cu-C Connecting Rods Based on Finite Element Simulation

    Optimization of the Hot Forging Processing Parameters for Powder Metallurgy Fe-Cu-C Connecting Rods Based on Finite Element Simulation
    Li F., J. Yi, J. Eckert
    Metall. Mater. Trans. A-Phys. Metall. Mater. Sci., 48A, 6027-6037 (2017)
  • Cyclically induced grain growth within shear bands investigated in UFG Ni by cyclic high pressure torsion

    Cyclically induced grain growth within shear bands investigated in UFG Ni by cyclic high pressure torsion
    Kapp M.W., O. Renk, T. Leitner, P. Ghosh, B. Yang, R. Pippan
    J. Mater. Res., 32, 4317-4326 (2017)
  • Dependence of fracture strain on flaw size in rail switches—Experiments and theoretical modelling

    Dependence of fracture strain on flaw size in rail switches—Experiments and theoretical modelling
    Kolitsch S., H.-P. Gänser, R. Pippan
    Engineering Failure Analysis, 85, 50-61 (2017)
  • Structural modification through pressurized sub-Tg annealing of metallic glasses

    Structural modification through pressurized sub-Tg annealing of metallic glasses
    Foroughi A., H. Ashuri, R. Tavakoli, M. Stoica, D. Sopu, J. Eckert
    Journal of Applied Physics, 122, ARTN 215106 (2017)
  • Fracture toughness and structural evolution in the TiAlN system upon annealing

    Fracture toughness and structural evolution in the TiAlN system upon annealing
    Bartosik M., C. Rumeau, R. Hahn, Z.L. Zhang, P.H. Mayrhofer
    Sci Rep, 7, ARTN 16476 (2017)
  • 30 nm X-ray focusing correlates oscillatory stress, texture and structural defect gradients across multilayered TiN-SiOx thin film

    30 nm X-ray focusing correlates oscillatory stress, texture and structural defect gradients across multilayered TiN-SiOx thin film
    Keckes J., R. Daniel, J. Todt, J. Zalesak, B. Sartory, S. Braun, J. Gluch, M. Rosenthal, M. Burghammer, C. Mitterer, S. Niese, A. Kubec
    Acta Materialia, 862-873 (2017)
  • Bond length deviation in CuZr metallic glasses

    Bond length deviation in CuZr metallic glasses
    Peng C.X., D. Sopu, K.K. Song, Z.T. Zhang, L. Wang, J. Eckert
    Phys. Rev. B, 96, ARTN 174112, 1-8 (2017)
  • Tailoring the magnetic properties of nanocrystalline Cu-Co alloys prepared by high-pressure torsion and isothermal annealing

    Tailoring the magnetic properties of nanocrystalline Cu-Co alloys prepared by high-pressure torsion and isothermal annealing
    Bachmaier A., H. Krenn, P. Knoll, H. Aboulfadl, R. Pippan
    J. Alloy. Compd., 725, 744-749 (2017)
  • Influencing the crystallization of Fe80Nb10B10 metallic glass by ball milling

    Influencing the crystallization of Fe80Nb10B10 metallic glass by ball milling
    Ramasamy P., R.N. Shahid, S. Scudino, J. Eckert, M. Stoica
    J. Alloy. Compd., 725, 227-236 (2017)
  • New Insights into Nanoindentation-Based Adhesion Testing

    New Insights into Nanoindentation-Based Adhesion Testing
    Kleinbichler A., M.J. Pfeifenberger, J. Zechner, N.R. Moody, D.F. Bahr, M.J. Cordill
    JOM, 69, 2237-2245 (2017)
  • Microstructure evolution and mechanical properties of carbon nanotubes reinforced Al matrix composites

    Microstructure evolution and mechanical properties of carbon nanotubes reinforced Al matrix composites
    Liu X., C. Li, J. Eckert, K.G. Prashanth, O. Renk, L. Teng, Y. Liu, R. Bao, J. Tao, T. Shen, J. Yi
    Mater. Charact., 133, 122-132 (2017)
  • Giant thermal expansion and alpha-precipitation pathways in Ti-alloys

    Giant thermal expansion and alpha-precipitation pathways in Ti-alloys
    Boenisch M., A. Panigrahi, M. Stoica, M. Calin, E. Ahrens, M. Zehetbauer, W. Skrotzki, J. Eckert
    Nat. Commun., 8, ARTN 1429 (2017)
  • Wetting behavior and reactivity between liquid Gd and ZrO2 substrate

    Wetting behavior and reactivity between liquid Gd and ZrO2 substrate
    Turalska P., M. Homa, G. Bruzda, N. Sobczak, I. Kaban, N. Mattern, J. Eckert
    Journal of Mining and Metallurgy, Section B: Metallurgy, 53, 285-293 (2017)
  • Atomic-Level Processes of Shear Band Nucleation in Metallic Glasses

    Atomic-Level Processes of Shear Band Nucleation in Metallic Glasses
    Sopu D., A. Stukowski, M. Stoica, S. Scudino
    Physical Review Letters, 119, ARTN 195503 (2017)
  • Substrate-Influenced Thermo-Mechanical Fatigue of Copper Metallizations: Limits of Stoney's Equation

    Substrate-Influenced Thermo-Mechanical Fatigue of Copper Metallizations: Limits of Stoney's Equation
    Bigl S., S. Wurster, M.J. Cordill, D. Kiener
    Materials, 10, ARTN 1287 (2017)
  • Structural modifications in sub-T-g annealed CuZr-based metallic glass

    Structural modifications in sub-T-g annealed CuZr-based metallic glass
    Sarac B., A. Bernasconi, J. Wright, M. Stoica, F. Spieckermann, M. Muehlbacher, J. Keckes, X. Bian, G. Wang, J. Eckert
    Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 707, 245-252 (2017)
  • Rapid and partial crystallization to design ductile CuZr-based bulk metallic glass composites

    Rapid and partial crystallization to design ductile CuZr-based bulk metallic glass composites
    Song K.K., X.L. Han, S. Pauly, Y.S. Qin, K. Kosiba, C.X. Peng, J.H. Gong, P.X. Chen, L. Wang, B. Sarac, S. Ketov, M. Mühlbacher, F. Spieckermann, I. Kaban, J. Eckert
    Materials and Design, 139, 132-140 (2017)
  • Dominating deformation mechanisms in ultrafine-grained chromium across length scales and temperatures

    Dominating deformation mechanisms in ultrafine-grained chromium across length scales and temperatures
    Fritz R., D. Wimler, A. Leitner, V. Maier-Kiener, D. Kiener
    Acta Materialia, 140, 176-187 (2017)
  • Resolving alternating stress gradients and dislocation densities across Al x Ga 1-x N multilayer structures on Si(111)

    Resolving alternating stress gradients and dislocation densities across Al x Ga 1-x N multilayer structures on Si(111)
    Reisinger M., M. Tomberger, J. Zechner, I. Daumiller, B. Sartory, W. Ecker, J. Keckes, R.T. Lechner
    Applied Physics Letters, 111, ARTN 162103 (2017)
  • Transparent magnetic semiconductor with embedded metallic glass nano-granules

    Transparent magnetic semiconductor with embedded metallic glass nano-granules
    Chen N., H. Li, A. Hirata, Z. Luo, Z. Wang, W. Liu, B. Cui, T. Hitosugi, L. Gu, X. Zhang, X. Zhang, C. Song, X. Wang, L. Zhang, J. Cao, K. Ohmura, S.V. Ketov, K. Yaoa, M. Chen, D.V. Louzguine-Luzgin
    Materials and Design, 132, 208-214 (2017)
  • Fracture Mechanism of Coronal Teenage Dentin

    Fracture Mechanism of Coronal Teenage Dentin
    Panfilov P.E., A.V. Kabanova, I.N. Borodin, J. Guo, Z. Zang
    RUSSIAN METALLURGY, 879-883 (2017)
  • Die Elektronik dehnen, bis sie bricht

    Die Elektronik dehnen, bis sie bricht
    Schmidt V.
    Die Presse (2017)
  • New beta-type Ti-Fe-Sn-Nb alloys with superior mechanical strength

    New beta-type Ti-Fe-Sn-Nb alloys with superior mechanical strength
    Zhao G.-H., S.V. Ketov, J. Jiang, H. Mao, A. Borgenstam, D.V. Louzguine-Luzgin
    Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 705, 348-351 (2017)
  • Synthesis and evaluation of new radical photoinitiators bearing trialkoxysilyl groups for surface immobilization

    Synthesis and evaluation of new radical photoinitiators bearing trialkoxysilyl groups for surface immobilization
    Roszkowski P., M. Sahin, S. Ayalur-Karunakaran, C. Gammer, S. Schloegl, W. Kern, K.K. Krawczyk
    Polymer, 129, 207-220 (2017)
  • Atomic origin for rejuvenation of a Zr-based metallic glass at cryogenic temperature

    Atomic origin for rejuvenation of a Zr-based metallic glass at cryogenic temperature
    Bian X.L., G. Wang, J. Yi, Y.D. Jia, J. Bednarcik, Q.J. Zhai, I. Kaban, B. Sarac, M. Muehlbacher, F. Spieckermann, J. Keckes, J. Eckert
    J. Alloy. Compd., 718, 254-259 (2017)
  • A correlative experimental and ab initio approach to improve the fracture behavior of Mo thin films by alloying with Cu

    A correlative experimental and ab initio approach to improve the fracture behavior of Mo thin films by alloying with Cu
    Joerg T., D. Music, M.J. Cordill, R. Franz, H. Koestenbauer, C. Linke, J. Winkler, J.M. Schneider, C. Mitterer
    Appl. Phys. Lett., 111, ARTN 134101 (2017)
  • Wetting, reactivity, and phase formation at interfaces between Ni–Al melts and TiB2 ultrahigh temperature ceramic

    Wetting, reactivity, and phase formation at interfaces between Ni–Al melts and TiB2 ultrahigh temperature ceramic
    Xi L., I. Kaban, R. Nowak, G. Bruzda, N. Sobczak, J. Eckert
    Journal of the American Ceramic Society, 101, 911-918 (2017)
  • MnFePSi-Based Magnetocaloric Packed Bed Regenerators: Structural Details Probed by X-Ray Tomography

    MnFePSi-Based Magnetocaloric Packed Bed Regenerators: Structural Details Probed by X-Ray Tomography
    Funk A., M. Zeilinger, A. Miehe, D. Sopu, J. Eckert, F. Dötz, A. Waske
    Chemical Engineering Science, 175, 84-90 (2017)
  • Friction welding of selective laser melted Ti6Al4V parts

    Friction welding of selective laser melted Ti6Al4V parts
    Prashanth K.G., R. Damodaram, T. Maity, P. Wang, J. Eckert
    Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 704, 66-71 (2017)
  • Effect of the cooling rate on the mechanical properties of Ti-Ni-Cu-Zr-based crystal/glassy alloys

    Effect of the cooling rate on the mechanical properties of Ti-Ni-Cu-Zr-based crystal/glassy alloys
    Jiang J., S. Ketov, H. Kato, D.V. Louzguine-luzgin
    Materials Science & Engineering A, 704, 147-153 (2017)
  • Effect of temperature on the fatigue-crack growth behavior of the high-entropy alloy CrMnFeCoNi

    Effect of temperature on the fatigue-crack growth behavior of the high-entropy alloy CrMnFeCoNi
    Thurston K.V.S., B. Gludovatz, A. Hohenwarter, G. Laplanche, E.P. George, R.O. Ritchie
    Intermetallics, 88, 65-72 (2017)
  • Processing of Ti-5553 with improved mechanical properties via an in-situ heat treatment combining selective laser melting and substrate plate heating

    Processing of Ti-5553 with improved mechanical properties via an in-situ heat treatment combining selective laser melting and substrate plate heating
    Schwab H., M. Boenisch, L. Giebeler, T. Gustmann, J. Eckert, U. Kuehn
    Mater. Des., 130, 83-89 (2017)
  • Development of advanced high heat flux and plasma-facing materials

    Development of advanced high heat flux and plasma-facing materials
    Linsmeier C., M. Rieth, J. Aktaa, T. Chikada, A. Hoffmann, J. Hoffmann, A. Houben, H. Kurishita, X. Jin, M. Li, A. Litnovsky, S. Matsuo, A. von Mueller, V. Nikolic, T. Palacios, R. Pippan, D. Qu, J. Reiser, J. Riesch, T. Shikama, R. Stieglitz, T. Weber, S. Wurster, J.-H. You, Z. Zhou
    Nucl. Fusion, 57, ARTN 092007 (2017)
  • Dislocation densities and alternating strain fields in CrN/AlN nanolayers

    Dislocation densities and alternating strain fields in CrN/AlN nanolayers
    Gu X., Z. Zhang, M. Bartosik, P.H. Mayrhofer, H. Duan
    Thin Solid Films, 638, 189-200 (2017)
  • Effect of Al2O3 Nanoparticles as Reinforcement on the Tensile Behavior of Al-12Si Composites

    Effect of Al2O3 Nanoparticles as Reinforcement on the Tensile Behavior of Al-12Si Composites
    Ma P., Y. Jia, P. Konda Gokuldoss, Z. Yu, S. Yang, J. Zhao, C. Li
    Metals, 7, 1-11 (2017)
  • A Polymer Route to the Design of Thermally Stable Metal Matrix Composites: Materials Selection and In-situ Processing

    A Polymer Route to the Design of Thermally Stable Metal Matrix Composites: Materials Selection and In-situ Processing
    Chelliah NM., Sudharsan, L. Kraemer, H. Singh, Surappa MK., R. Raj
    Research and Reports on Metals, 1:3, ARTN 1000108 (2017)
  • Remarkable transitions of yield behavior and Lüders deformation in pure Cu by changing grain sizes

    Remarkable transitions of yield behavior and Lüders deformation in pure Cu by changing grain sizes
    Tian Y.Z., S. Gao, L.J. Zhao, S. Lu, R. Pippan, Z.F. Zhang, N. Tsuji
    Scripta Materialia, 142, 88-91 (2017)
  • Crack path identification in a nanostructured pearlitic steel using atom probe tomography

    Crack path identification in a nanostructured pearlitic steel using atom probe tomography
    Leitner T., S. Sackl, B. Völker, H. Riedl, H. Clemens, R. Pippan, A. Hohenwarter
    Scripta Materialia, 142, 66-69 (2017)
  • Microstructure and mechanical properties of Al-Cu alloys fabricated by selective laser melting of powder mixtures

    Microstructure and mechanical properties of Al-Cu alloys fabricated by selective laser melting of powder mixtures
    Wang P., K.G. Prashanth, S. Pauly, J. Eckert, S. Scudino
    Journal of Alloys and Compounds, 735, 2263-2266 (2017)
  • Femtosecond laser machining for characterization of local mechanical properties of biomaterials: a case study on wood

    Femtosecond laser machining for characterization of local mechanical properties of biomaterials: a case study on wood
    Jakob S., M.J. Pfeifenberger, A. Hohenwarter, R. Pippan
    Sci. Technol. Adv. Mater., 18, 574-583 (2017)
  • Dislocation Movement Induced by Molecular Relaxations in Isotactic Polypropylene

    Dislocation Movement Induced by Molecular Relaxations in Isotactic Polypropylene
    Spieckermann F., G. Polt, H. Wilhelm, M.B. Kerber, E. Schafler, M. Reinecker, V. Soprunyuk, S. Bernstorff, M. Zehetbauer
    Macromolecules, 50, 6362-6368 (2017)
  • On nanostructured molybdenum-copper composites produced by high-pressure torsion

    On nanostructured molybdenum-copper composites produced by high-pressure torsion
    Rosalie J.M., J. Guo, R. Pippan, Z. Zhang
    J. Mater. Sci., 52, 9872-9883 (2017)
  • Micropatterning kinetics of different glass-forming systems investigated by thermoplastic net-shaping

    Micropatterning kinetics of different glass-forming systems investigated by thermoplastic net-shaping
    Sarac B., S. Bera, F. Spieckermann, S. Balakin, M. Stoica, M. Calin, J. Eckert
    Scr. Mater., 137, 127-131 (2017)
  • Generation of extreme grain aspect ratios in severely deformed tantalum at elevated temperatures

    Generation of extreme grain aspect ratios in severely deformed tantalum at elevated temperatures
    Renk O., P. Ghosh, R. Pippan
    Scr. Mater., 137, 60-63 (2017)
  • Tungsten fibre-reinforced composites for advanced plasma facing components

    Tungsten fibre-reinforced composites for advanced plasma facing components
    Neu R., J. Riesch, A.V. Mueller, M. Balden, J.W. Coenen, H. Gietl, T. Hoeschen, M. Li, S. Wurster, J.-H. You
    NUCLEAR MATERIALS AND ENERGY, 12, 1308-1313 (2017)
  • Deformation behavior of Re alloyed Mo thin films on flexible substrates: In situ fragmentation analysis supported by first-principles calculations

    Deformation behavior of Re alloyed Mo thin films on flexible substrates: In situ fragmentation analysis supported by first-principles calculations
    Joerg T., D. Music, F. Hauser, M.J. Cordill, R. Franz, H. Koestenbauer, J. Winkler, J.M. Schneider, C. Mitterer
    Sci Rep, 7, ARTN 7374 (2017)
  • Reordering a deformation disordered intermetallic compound by antiphase boundary movement

    Reordering a deformation disordered intermetallic compound by antiphase boundary movement
    Gammer C., H.P. Karnthaler, C. Rentenberger
    J. Alloy. Compd., 713, 148-155 (2017)
  • Impact of severe plastic deformation on microstructure and fracture toughness evolution of a duplex-steel

    Impact of severe plastic deformation on microstructure and fracture toughness evolution of a duplex-steel
    Schwarz K.T., K.S. Kormout, R. Pippan, A. Hohenwarter
    Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 703, 173-179 (2017)
  • Hardening of shear band in metallic glass

    Hardening of shear band in metallic glass
    Wang J.G., Y.C. Hu, P.F. Guan, K.K. Song, L. Wang, G. Wang, Y. Pan, B. Sarac, J. Eckert
    Sci Rep, 7, ARTN 7076 (2017)
  • Verformungsinduzierte Übersätigung in unmischbaren Materialsystemen während der Hochdrucktorsionsverformung

    Verformungsinduzierte Übersätigung in unmischbaren Materialsystemen während der Hochdrucktorsionsverformung
    Verformungsinduzierte Übersätigung in unmischbaren Materialsystemen während der Hochdrucktorsionsverformung
    Zeitschrift der Montanuniversität Leoben, 4-5 (2017)
  • An in-situ synchrotron study on microplastic flow of electrodeposited nanocrystalline nickel

    An in-situ synchrotron study on microplastic flow of electrodeposited nanocrystalline nickel
    Ghosh P., S. Van Petegem, H. Van Swygenhoven, A.H. Chokshi
    Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 701, 101-110 (2017)
  • From powders to bulk metallic glass composites

    From powders to bulk metallic glass composites
    Kraemer L., Y. Champion, R. Pippan
    Sci Rep, 7, ARTN 6651 (2017)
  • Tensile, fracture, and fatigue crack growth properties of a 3D printed maraging steel through selective laser melting

    Tensile, fracture, and fatigue crack growth properties of a 3D printed maraging steel through selective laser melting
    Suryawanshi J., K.G. Prashanth, U. Ramamurty
    Journal of Alloys and Compounds, 725, 355-364 (2017)
  • In-situ tracking the structural and chemical evolution of nanostructured CuCr alloys

    In-situ tracking the structural and chemical evolution of nanostructured CuCr alloys
    Zhang Z., J. Guo, G. Dehm, R. Pippan
    Acta Mater., 138, 42-51 (2017)
  • The effect of severe grain refinement on the damage tolerance of a superelastic NiTi shape memory alloy

    The effect of severe grain refinement on the damage tolerance of a superelastic NiTi shape memory alloy
    Leitner T., E. Sabirov, R. Pippan, A. Hohenwarter
    J. Mech. Behav. Biomed. Mater., 71, 337-348 (2017)
  • Reciprocating sliding wear behavior of high-strength nanocrystalline Al84Ni7Gd6Co3 alloys

    Reciprocating sliding wear behavior of high-strength nanocrystalline Al84Ni7Gd6Co3 alloys
    Wang Z., K. Georgarakis, W.W. Zhang, K.G. Prashanth, J. Eckert, S. Scudino
    Wear, 382, 78-84 (2017)
  • Microstructure and abrasive wear behavior of a novel FeCrMoVC laser cladding alloy for high-performance tool steels

    Microstructure and abrasive wear behavior of a novel FeCrMoVC laser cladding alloy for high-performance tool steels
    Zeisig J., N. Schaedlich, L. Giebeler, J. Sander, J. Eckert, U. Kuehn, J. Hufenbach
    Wear, 382, 107-112 (2017)
  • Effect of Co additions on the phase formation, thermal stability, and mechanical properties of rapidly solidified Ti-Cu-based alloys

    Effect of Co additions on the phase formation, thermal stability, and mechanical properties of rapidly solidified Ti-Cu-based alloys
    Gargarella P., S. Pauly, C.S. Kiminami, J. Eckert
    J. Mater. Res., 32, 2578-2584 (2017)
  • Stability of shear banding process in bulk metallic glasses and composites

    Stability of shear banding process in bulk metallic glasses and composites
    Qin Y., X. Han, K. Song, L. Wang, Y. Cheng, Z. Zhang, Q. Xue, N. Sun, J. Wang, B. Sun, B. Sarac, F. Spieckermann, G. Wang, I. Kaban, J. Eckert
    J. Mater. Res., 32, 2560-2569 (2017)
  • Insights into the deformation behavior of the CrMnFeCoNi high-entropy alloy revealed by elevated temperature nanoindentation

    Insights into the deformation behavior of the CrMnFeCoNi high-entropy alloy revealed by elevated temperature nanoindentation
    Maier-Kiener V., B. Schuh, E.P. George, H. Clemens, A. Hohenwarter
    J. Mater. Res., 32, 2658-2667 (2017)
  • Development and application of a heated in-situ SEM micro-testing device

    Development and application of a heated in-situ SEM micro-testing device
    Fritz R., D. Kiener
    Measurement, 110, 356-366 (2017)
  • Characterization of Al/Crystallized Al-Based Metallic Glass Composites Produced by Repeated Roll Bonding Process

    Characterization of Al/Crystallized Al-Based Metallic Glass Composites Produced by Repeated Roll Bonding Process
    Alizadeh M., S. Khoramkhorshid, A.H. Taghvaei, P. Konda Gokuldoss
    Metals and Materials International, 23, 823-830 (2017)
  • Cryogenic-temperature-induced structural transformation of a metallic glass

    Cryogenic-temperature-induced structural transformation of a metallic glass
    Bian X., G. Wang, Q. Wang, B. Sun, I. Hussain, Q. Zhai, N. Mattern, J. Bednarcik, J. Eckert
    MATERIALS RESEARCH LETTERS, 5, 284-291 (2017)
  • In situ TEM observation of FCC Ti formation at elevated temperatures

    In situ TEM observation of FCC Ti formation at elevated temperatures
    Yu Q., J. Kacher, C. Gammer, R. Traylor, S. Amit, Z. Yang, A.M. Minor
    Scripta Materialia, 140, 9-12 (2017)
  • Ti-Fe-Sn-Nb hypoeutectic alloys with superb yield strength and significant strain-hardening

    Ti-Fe-Sn-Nb hypoeutectic alloys with superb yield strength and significant strain-hardening
    Zhao G.-H., S.V. Ketov, H. Mao, A. Borgenstama, D.V. Louzguine-Luzgin
    Scripta Materialia, 135, 59–62 (2017)
  • High resolution residual stress gradient characterization in W/TiN-stack on Si(100): Correlating in-plane stress and grain size distributions in W sublayer

    High resolution residual stress gradient characterization in W/TiN-stack on Si(100): Correlating in-plane stress and grain size distributions in W sublayer
    Hammer R., J. Todt, J. Keckes, B. Sartory, G. Parteder, J. Kraft, S. Defregger
    Mater. Des., 132, 72-78 (2017)
  • β-type Ti-based bulk metallic glass composites with tailored structural metastability

    β-type Ti-based bulk metallic glass composites with tailored structural metastability
    Zhang L., H. Zhang, W. Li, T. Gemming, P. Wang, M. Boenisch, D. Sopu, J. Eckert, S. Pauly
    J. Alloy. Compd., 708, 972-981 (2017)
  • Additive Manufacturing Processes: Selective Laser Melting, Electron Beam Melting and Binder JettingSelection Guidelines

    Additive Manufacturing Processes: Selective Laser Melting, Electron Beam Melting and Binder JettingSelection Guidelines
    Gokuldoss P.K., S. Kolla, J. Eckert
    Materials, 10, ARTN 672 (2017)
  • Experimental and calculation challenges of crack propagation in notches - From initiation to end of lifetime

    Experimental and calculation challenges of crack propagation in notches - From initiation to end of lifetime
    Kolitsch S., H.P. Gaenser, R. Pippan
    Int. J. Fatigue, 103, 395-404 (2017)
  • Approximate stress intensity factor solutions for semi-elliptical cracks with large a/W and c/B under tension and bending

    Approximate stress intensity factor solutions for semi-elliptical cracks with large a/W and c/B under tension and bending
    Kolitsch S., H.-P. Gänser, R. Pippan
    Theoretical and Applied Fracture Mechanics, 92, 167-177 (2017)
  • Corrosion properties of high-strength nanocrystalline Al84Ni7Gd6Co3 alloy produced by hot pressing of metallic glass

    Corrosion properties of high-strength nanocrystalline Al84Ni7Gd6Co3 alloy produced by hot pressing of metallic glass
    Wang Z., S. Scudino, K.G. Prashanth, J. Eckert
    J. Alloy. Compd., 707, 63-67 (2017)
  • Effect of replacing Nb with (Mo and Zr) on glass forming ability, magnetic and mechanical properties of FeCoBSiNb bulk metallic glass

    Effect of replacing Nb with (Mo and Zr) on glass forming ability, magnetic and mechanical properties of FeCoBSiNb bulk metallic glass
    Ramasamy P., M. Stoica, S. Bera, M. Calin, J. Eckert
    J. Alloy. Compd., 707, 78-81 (2017)
  • Selective laser melting of Al-Zn-Mg-Cu: Heat treatment, microstructure and mechanical properties

    Selective laser melting of Al-Zn-Mg-Cu: Heat treatment, microstructure and mechanical properties
    Wang P., H.C. Li, K.G. Prashanth, J. Eckert, S. Scudino
    J. Alloy. Compd., 707, 287-290 (2017)
  • Formation of metastable cellular microstructures in selective laser melted alloys

    Formation of metastable cellular microstructures in selective laser melted alloys
    Prashanth K.G., J. Eckert
    J. Alloy. Compd., 707, 27-34 (2017)
  • Deformation Behavior of Powder Metallurgy Connecting Rod Preform During Hot Forging Based on Hot Compression and Finite Element Method Simulation

    Deformation Behavior of Powder Metallurgy Connecting Rod Preform During Hot Forging Based on Hot Compression and Finite Element Method Simulation
    Li F., J. Yi, J. Eckert
    Metall. Mater. Trans. A-Phys. Metall. Mater. Sci., 48A, 2971-2978 (2017)
  • Mechanism of formation of fibrous eutectic Si and thermal conductivity of SiCp/Al-20Si composites solidified under high pressure

    Mechanism of formation of fibrous eutectic Si and thermal conductivity of SiCp/Al-20Si composites solidified under high pressure
    Ma P., Z.J. Wei, Y.D. Jia, Z.S. Yu, K.G. Prashanth, S.L. Yang, C.G. Li, L.X. Huang, J. Eckert
    J. Alloy. Compd., 709, 329-336 (2017)
  • Crack driving force in twisted plywood structures

    Crack driving force in twisted plywood structures
    Fischer F.D., O. Kolednik, J. Predan, H. Razi, P. Fratzl
    Acta Biomater., 55, 349-359 (2017)
  • Film thickness dependent microstructural changes of thick copper metallizations upon thermal fatigue

    Film thickness dependent microstructural changes of thick copper metallizations upon thermal fatigue
    Bigl S., C.O.W. Trost, S. Wurster, M.J. Cordill, D. Kiener
    J. Mater. Res., 32, 2022-2034 (2017)
  • The bi-layered precipitate phase zeta in the Al-Ag alloy system

    The bi-layered precipitate phase zeta in the Al-Ag alloy system
    Zhang Z., L. Bourgeois, J.M. Rosalie, N.V. Medhekar
    Acta Mater., 132, 525-537 (2017)
  • Simultaneous enhancement of strength and fatigue crack growth behavior of nanocrystalline steels by annealing

    Simultaneous enhancement of strength and fatigue crack growth behavior of nanocrystalline steels by annealing
    Leitner T., S. Pillmeier, K.S. Kormout, R. Pippan, A. Hohenwarter
    Scr. Mater., 139, 39-43 (2017)
  • Is the energy density a reliable parameter for materials synthesis by selective laser melting?

    Is the energy density a reliable parameter for materials synthesis by selective laser melting?
    Prashanth K.G., S. Scudino, T. Maity, J. Das, J. Eckert
    MATERIALS RESEARCH LETTERS, 5, 386-390 (2017)
  • Investigation of structure and thermal properties in composite materials based on metallic glasses with small addition of polytetrafluoroethylene

    Investigation of structure and thermal properties in composite materials based on metallic glasses with small addition of polytetrafluoroethylene
    Zadorozhnyy V.Y., M.V. Gorshenkov, M.N. Churyukanova, M.Y. Zadorozhnyy, A.A. Stepashkin, D.O. Moskovskikh, S.V. Ketov, L.K. Zinnurova, A. Sharma, D.V. Louzguine-Luzgin, S.D. Kaloshkin
    Journal of Alloys and Compounds, 707, 264-268 (2017)
  • Nucleation and thermal stability of an icosahedral nanophase during the early crystallization stage in Zr-Co-Cu-Al metallic glasses

    Nucleation and thermal stability of an icosahedral nanophase during the early crystallization stage in Zr-Co-Cu-Al metallic glasses
    Wang Z., S.V. Ketov, C.L. Chen, Y. Shen, Y. Ikuhara, A.A. Tsarkov, D.V. Louzguine-Luzgin, J.H. Perepezko
    Acta Materialia, 132, 298-306 (2017)
  • Thickness dependence of the electro-mechanical response of sputter deposited Mo thin films on polyimide: Insights from in situ synchrotron diffraction tensile tests

    Thickness dependence of the electro-mechanical response of sputter deposited Mo thin films on polyimide: Insights from in situ synchrotron diffraction tensile tests
    Joerg T., M.J. Cordill, R. Franza, C. Kirchlechner, D.M. Toebbens, J. Winkler, C. Mitterer
    Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 697, 17-23 (2017)
  • Effect of Si content on the microstructure and properties of Al-Si alloys fabricated using hot extrusion

    Effect of Si content on the microstructure and properties of Al-Si alloys fabricated using hot extrusion
    Ma P., Y. Jia, P. Konda Gokuidoss, Z. Yu, C. Li, J. Zhao, S. Yang, L. Huang
    Journal of Materials Research, 32, 2210-2217 (2017)
  • Correlative characterization on microstructure evolution of Ni-based K403 alloy during thermal exposure

    Correlative characterization on microstructure evolution of Ni-based K403 alloy during thermal exposure
    Liu J., J. Li, F.S. Hage, P. Ghosh, J. Li, W. Wang, Z. Chen, T. Wang, W. Tang, Q. Ramasse, P. Schumacher
    Acta Mater., 131, 169-186 (2017)
  • Dynamic nanoindentation testing: is there an influence on a material’s hardness?

    Dynamic nanoindentation testing: is there an influence on a material’s hardness?
    Leitner A., V. Maier-Kiener, D. Kiener
    Materials Research Letters, 5, 486-493 (2017)
  • Single-shot full strain tensor determination with microbeam X-ray Laue diffraction and a two- dimensional energy-dispersive detector

    Single-shot full strain tensor determination with microbeam X-ray Laue diffraction and a two- dimensional energy-dispersive detector
    Abboud A., C. Kirchlechner, J. Keckes, T. Conka Nurdan, S. Send, J.S. Micha, O. Ulrich, R. Hartmann, L. Strüderf, U. Pietsch
    Journal of Applied Crystallography, 50, 901-908 (2017)
  • Probing the dynamics of complexed local anesthetics via neutron scattering spectroscopy and DFT calculations

    Probing the dynamics of complexed local anesthetics via neutron scattering spectroscopy and DFT calculations
    Martins M.L., J. Eckert, H. Jacobsen, E.C. dos Santos, R. Ignazzi, D.R. de Araujo, M.C. Bellissent-Funel, F. Natali, M.M. Koza, A. Matic, E. de Paula, H.N. Bordallo
    International Journal of Pharmaceutics, 524, 397-406 (2017)
  • Structural, elastic and electronic properties of CoZr in B2 and B33 structures under high pressure

    Structural, elastic and electronic properties of CoZr in B2 and B33 structures under high pressure
    Lu W.F., C.J. Li, B. Sarac, D. Sopu, J.H. Yi, J. Tan, M. Stoica, J. Eckert
    J. Alloy. Compd., 705, 445-455 (2017)
  • Dichlorosilane-derived nano-silicon inside hollow carbon spheres as a high-performance anode for Li-ion batteries

    Dichlorosilane-derived nano-silicon inside hollow carbon spheres as a high-performance anode for Li-ion batteries
    Jaumann T., M. Gerwig, J. Balach, S. Oswald, E. Brendler, R. Hauser, B. Kieback, J. Eckert, L. Giebeler, E. Kroke
    J. Mater. Chem. A, 5, 9262-9271 (2017)
  • Mechanochemical synthesis of nanostructured metal nitrides, carbonitrides and carbon nitride: a combined theoretical and experimental study

    Mechanochemical synthesis of nanostructured metal nitrides, carbonitrides and carbon nitride: a combined theoretical and experimental study
    Rounaghi S.A., D.E.P. Vanpoucke, H. Eshghi, S. Scudino, E. Esmaeili, S. Oswald, J. Eckert
    Phys. Chem. Chem. Phys., 19, 12414-12424 (2017)
  • Revealing the Microstructural evolution in Cu-Cr nanocrystalline alloys during high pressure torsion

    Revealing the Microstructural evolution in Cu-Cr nanocrystalline alloys during high pressure torsion
    Guo J., J.M. Rosalie, R. Pippan, Z. Zhang
    Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 695, 350-359 (2017)
  • Temperature dependent structural evolution in nickel/carbon nanotube composites processed by high-pressure torsion

    Temperature dependent structural evolution in nickel/carbon nanotube composites processed by high-pressure torsion
    Katzensteiner A., K. Aristizabal, S. Suarez, R. Pippan, A. Bachmaier
    IOP Conference Series: Materials Science and Engineering, 194, ARTN 012019 (2017)
  • Microstructure and texture evolution during severe plastic deformation of CrMnFeCoNi high-entropy alloy

    Microstructure and texture evolution during severe plastic deformation of CrMnFeCoNi high-entropy alloy
    Skrotzki W., A. Pukenas, B. Joni, E. Odor, T. Ungar, A. Hohenwarter, R. Pippan, E.P. George
    IOP Conf. Series: Materials Science and Engineering, 194, ARTN 012028 (2017)
  • Selective laser melting of ultra-high-strength TRIP steel: processing, microstructure, and properties

    Selective laser melting of ultra-high-strength TRIP steel: processing, microstructure, and properties
    Sander J., J. Hufenbach, M. Bleckmann, L. Giebeler, H. Wendrock, S. Oswald, T. Gemming, J. Eckert, U. Kuehn
    J. Mater. Sci., 52, 4944-4956 (2017)
  • On the phase evolution and dissolution process in Cu-Cr alloys deformed by high pressure torsion

    On the phase evolution and dissolution process in Cu-Cr alloys deformed by high pressure torsion
    Guo J., J. Rosalie, R. Pippan, Z. Zhang
    Scr. Mater., 133, 41-44 (2017)
  • Designing a novel functional-structural NiTi/hydroxyapatite composite with enhanced mechanical properties and high bioactivity

    Designing a novel functional-structural NiTi/hydroxyapatite composite with enhanced mechanical properties and high bioactivity
    Zhang L., Z.Y. He, J. Tan, Y.Q. Zhang, M. Stoica, M. Calin, K.G. Prashanth, M.J. Cordill, Y.H. Jiang, R. Zhou, J. Eckert
    Intermetallics, 84, 35-41 (2017)
  • Monotonic and cyclic mechanical reliability of metallization lines on polymer substrates

    Monotonic and cyclic mechanical reliability of metallization lines on polymer substrates
    Glushko O., A. Klug, E.J.W. List-Kratochvil, M.J. Cordill
    J. Mater. Res., 32, 1760-1769 (2017)
  • A versatile atomic force microscope integrated with a scanning electron microscope

    A versatile atomic force microscope integrated with a scanning electron microscope
    Kreith J., T. Strunz, E.J. Fantner, G.E. Fantner, M.J. Cordill
    Rev. Sci. Instrum., 88, ARTN 053704 (2017)
  • Optimizing disk registration algorithms for nanobeam electron diffraction strain mapping

    Optimizing disk registration algorithms for nanobeam electron diffraction strain mapping
    Pekin T.C., C. Gammer, J. Ciston, A.M. Minor, C. Ophus
    Ultramicroscopy, 176, 170-176 (2017)
  • Electrochemical and biocompatibility examinations of high-pressure torsion processed titanium and Ti–13Nb–13Zr alloy

    Electrochemical and biocompatibility examinations of high-pressure torsion processed titanium and Ti–13Nb–13Zr alloy
    Dimić I., I. Cvijović-Alagić, A. Hohenwarter, R. Pippan, V. Kojić, J. Bajat, M. Rakin
    Journal of Biomedical Materials Research, Part B Applied Biomaterials, 1-11 (2017)
  • Explicit relationship between electrical and topological degradation of polymer-supported metal films subjected to mechanical loading

    Explicit relationship between electrical and topological degradation of polymer-supported metal films subjected to mechanical loading
    Glushko O., P. Kraker, M.J. Cordill
    Appl. Phys. Lett., 110, ARTN 191904 (2017)
  • Direct Observation of Current-Induced Motion of a 3D Vortex Domain Wall in Cylindrical Nanowires

    Direct Observation of Current-Induced Motion of a 3D Vortex Domain Wall in Cylindrical Nanowires
    Ivanov Y.P., A. Chuvilin, S. Lopatin, H. Mohammed, J. Kosel
    ACS Applied Materials and Interfaces, 9, 16741–16744 (2017)
  • The use of femtosecond laser ablation as a novel tool for rapid micro-mechanical sample preparation

    The use of femtosecond laser ablation as a novel tool for rapid micro-mechanical sample preparation
    Pfeifenberger M.J., M. Mangang, S. Wurster, J. Reiser, A. Hohenwarter, W. Pfleging, D. Kiener, R. Pippan
    MATERIALS & DESIGN, 121, 109-118 (2017)
  • Deformation-Induced Supersaturation in Immiscible Material Systems during High-Pressure Torsion

    Deformation-Induced Supersaturation in Immiscible Material Systems during High-Pressure Torsion
    Kormout K.S., R. Pippan, A. Bachmaier
    Advanced Engineering Materials, 19, ARTN 1600675, 1-19 (2017)
  • Thin film adhesion of flexible electronics influenced by interlayers

    Thin film adhesion of flexible electronics influenced by interlayers
    Kleinbichler A., M. Bartosik, B. Völker, M.J. Cordill
    Advanced Engineering Materials, 19, 1-7 (2017)
  • Fracture of severely plastically deformed Ta and Nb

    Fracture of severely plastically deformed Ta and Nb
    Hohenwarter A., S. Wurster, B. Voelker
    Int. J. Refract. Met. Hard Mat., 64, 143-150 (2017)
  • Fatigue crack closure: a review of the physical phenomena

    Fatigue crack closure: a review of the physical phenomena
    Pippan R., A. Hohenwarter
    Fatigue Fract. Eng. Mater. Struct., 40, 471-495 (2017)
  • Micro-patterning by thermoplastic forming of Ni-free Ti-based bulk metallic glasses

    Micro-patterning by thermoplastic forming of Ni-free Ti-based bulk metallic glasses
    Bera S., B. Sarac, S. Balakin, P. Ramasamy, M. Stoica, M. Calin, J. Eckert
    MATERIALS & DESIGN, 120, 204-211 (2017)
  • High cycle fatigue testing of thermosonic ball bonds

    High cycle fatigue testing of thermosonic ball bonds
    Lassnig A., M. Lederer, G. Khatibi, R. Pelzer, W. Robl, M. Nelhiebel
    Microelectron. Reliab., 70, 91-98 (2017)
  • Microstructural Effects on the Toughness of a High Co-Ni Steel

    Microstructural Effects on the Toughness of a High Co-Ni Steel
    Gruber M., G. Ressel, S. Ploberger, S. Marsoner, O. Kolednik, R. Ebner
    Adv. Eng. Mater., 19, UNSP 1600633 (2017)
  • Extraction of Flow Behavior and Hall-Petch Parameters Using a Nanoindentation Multiple Sharp Tip Approach

    Extraction of Flow Behavior and Hall-Petch Parameters Using a Nanoindentation Multiple Sharp Tip Approach
    Leitner A., V. Maier-Kiener, D. Kiener
    Adv. Eng. Mater., 19, UNSP 1600669 (2017)
  • Phase Decomposition of a Single-Phase AlTiVNb High-Entropy Alloy after Severe Plastic Deformation and Annealing

    Phase Decomposition of a Single-Phase AlTiVNb High-Entropy Alloy after Severe Plastic Deformation and Annealing
    Schuh B., B. Voelker, V. Maier-Kiener, J. Todt, J. Li, A. Hohenwarter
    Adv. Eng. Mater., 19, UNSP 1600674 (2017)
  • Complementary High Spatial Resolution Methods in Materials Science and Engineering

    Complementary High Spatial Resolution Methods in Materials Science and Engineering
    Paris O., D. Lang, J. Li, P. Schumacher, M. Deluca, R. Daniel, M. Tkadletz, N. Schalk, C. Mitterer, J. Todt, J. Keckes, Z. Zhang, G. Fritz-Popovski, C. Ganser, C. Teichert, H. Clemens
    Adv. Eng. Mater., 19, UNSP 1600671 (2017)
  • Mechanical behavior of selective laser melted 316L stainless steel

    Mechanical behavior of selective laser melted 316L stainless steel
    Suryawanshi J., K.G. Prashanth, U. Ramamurty
    Materials Science & Engineering A, 696, 113-121 (2017)
  • Magnon Mode Selective Spin Transport in Compensated Ferrimagnets

    Magnon Mode Selective Spin Transport in Compensated Ferrimagnets
    Cramer J., E.-J. Guo, S. Geprägs, A. Kehlberger, Y.P. Ivanov, K. Ganzhorn, F. Della Coletta, M. Althammer, H. Huebl, R. Gross, J. Kosel, M. Kläui, S.T.B. Goennenwein
    Nano Letters, 17, 3334-3340 (2017)
  • Electro-mechanical performance of thin gold films on polyimide

    Electro-mechanical performance of thin gold films on polyimide
    Putz B., O. Glushko, V.M. Marx, C. Kirchlechner, D. Toebbens, M.J. Cordill
    MRS ADVANCES, 1, 773-778 (2017)
  • Superlattice-induced oscillations of interplanar distances and strain effects in the CrN/AlN system

    Superlattice-induced oscillations of interplanar distances and strain effects in the CrN/AlN system
    Zhang Z., X. Gu, D. Holec, M. Bartosik, P.H. Mayrhofer, H.P. Duan
    Phys. Rev. B, 95, ARTN 155305 (2017)
  • Peculiarity of self-assembled cubic nanolamellae in the TiN/AlN system: Epitaxial self-stabilization by element deficiency/excess

    Peculiarity of self-assembled cubic nanolamellae in the TiN/AlN system: Epitaxial self-stabilization by element deficiency/excess
    Zalezak J., D. Holec, I. Matko, Petrenec M., B. Sartory, N. Koutna, R. Daniel, R. Pitonak, J. Keckes
    Acta Materialia, 131, 391-399 (2017)
  • Hierarchical surface patterning of Ni- and Be-free Ti- and Zr-based bulk metallic glasses by thermoplastic net-shaping

    Hierarchical surface patterning of Ni- and Be-free Ti- and Zr-based bulk metallic glasses by thermoplastic net-shaping
    Sarac B., S. Bera, S. Balakin, M. Stoica, M. Calin, J. Eckert
    Materials Science and Engineering C, 73, 398-405 (2017)
  • Transient nucleation and microstructural design in flash-annealed bulk metallic glasses

    Transient nucleation and microstructural design in flash-annealed bulk metallic glasses
    Kosiba K., S. Scudino, R. Kobold, U. Kuehn, A.L. Greer, J. Eckert, S. Pauly
    Acta Mater., 127, 416-425 (2017)
  • Prediction of effective mode II fatigue crack growth threshold for metallic materials

    Prediction of effective mode II fatigue crack growth threshold for metallic materials
    Vojtek T., R. Pippan, A. Hohenwarter, J. Pokluda
    Eng. Fract. Mech., 174, 117-126 (2017)
  • Influence of the Ag concentration on the medium-range order in a CuZrAlAg bulk metallic glass

    Influence of the Ag concentration on the medium-range order in a CuZrAlAg bulk metallic glass
    Gammer C., B. Escher, C. Ebner, A.M. Minor, H.P. Karnthaler, J. Eckert, S. Pauly, C. Rentenberger
    Sci Rep, 7, ARTN 44903 (2017)
  • The driving force governing room temperature grain coarsening in thin gold films

    The driving force governing room temperature grain coarsening in thin gold films
    Glushko O., M.J. Cordill
    Scripta Materialia, 130, 42-45 (2017)
  • Hysteretic behavior of soft magnetic elastomer composites

    Hysteretic behavior of soft magnetic elastomer composites
    Krautz M., D. Werner, M. Schrödner, A. Funk, A. Jantz, J. Popp, J. Eckert, Waske. A.
    Journal of Magnetism and Magnetic Materials, 426, 60-63 (2017)
  • Extracting flow curves from nano-sized metal layers in thin film systems

    Extracting flow curves from nano-sized metal layers in thin film systems
    Kozic D., V. Maier-Kiener, R. Konetschnik, H.P. Gänser, T. Antretter, R. Brunner, D. Kiener
    Schripta Materialia, 130, 143-147 (2017)
  • Thermal stability and latent heat of Nb-rich martensitic Ti-Nb alloys

    Thermal stability and latent heat of Nb-rich martensitic Ti-Nb alloys
    Boenisch M., A. Panigrahi, M. Calin, T. Waitz, M. Zehetbauer, W. Skrotzki, J. Eckert
    J. Alloy. Compd., 697, 300-309 (2017)
  • Microstructure and thermal expansion behavior of Al-50Si synthesized by selective laser melting

    Microstructure and thermal expansion behavior of Al-50Si synthesized by selective laser melting
    Jia Y.D., P. Ma, K.G. Prashanth, G. Wang, J. Yi, S. Scudino, F.Y. Cao, J.F. Sun, J. Eckert
    J. Alloy. Compd., 699, 548-553 (2017)
  • Fatigue crack growth anisotropy in ultrafine-grained iron

    Fatigue crack growth anisotropy in ultrafine-grained iron
    Leitner T., A. Hohenwarter, W. Ochensberger, R. Pippan
    Acta Mater., 126, 154-165 (2017)
  • Defining the tensile properties of Al-12Si parts produced by selective laser melting

    Defining the tensile properties of Al-12Si parts produced by selective laser melting
    Prashanth K.G., S. Scudino, J. Eckert
    Acta Mater., 126, 25-35 (2017)
  • Impact of d-band filling on the dislocation properties of bcc transition metals: The case of tantalum-tungsten alloys investigated by density- functional theory

    Impact of d-band filling on the dislocation properties of bcc transition metals: The case of tantalum-tungsten alloys investigated by density- functional theory
    Li H., C. Draxl, S. Wurster, R. Pippan, L. Romaner
    PHYSICAL REVIEW B, 95, ARTN 094114 (2017)
  • Nanoindentation and wear properties of Ti and Ti-TiB composite materials produced by selective laser melting

    Nanoindentation and wear properties of Ti and Ti-TiB composite materials produced by selective laser melting
    Attar H., S. Ehtemam-Haghighi, D. Kent, I.V. Okulov, H. Wendrock, M. Boenisch, A.S. Volegov, M. Calin, J. Eckert, M.S. Dargusch
    Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 688, 20-26 (2017)
  • Selective interface toughness measurements of layered thin films

    Selective interface toughness measurements of layered thin films
    Konetschnik R., R. Daniel, R. Brunner, D. Kiener
    AIP Advances, 7, ARTN 035307 (2017)
  • Ab-initio and experimental study of phase stability of Ti-Nb alloys

    Ab-initio and experimental study of phase stability of Ti-Nb alloys
    Gutiérrez Moreno J.J., M. Bönisch, N.T. Panagiotopoulos, M. Calin, D.G. Papageorgiou, a. Gebert, J. Eckert, G.G. Evangelakis, C.E. Lekka
    Journal of Alloys and Compounds, 696, 481-489 (2017)
  • Rapid fabrication of function-structure-integrated NiTi alloys: Towards a combination of excellent superelasticity and favorable bioactivity

    Rapid fabrication of function-structure-integrated NiTi alloys: Towards a combination of excellent superelasticity and favorable bioactivity
    Zhang L., Z.Y. He, J. Tan, Y.Q. Zhang, M. Stoica, K.G. Prashanth, M.J. Cordill, Y.H. Jiang, R. Zhou, J. Eckert
    Intermetallics, 82, 1-13 (2017)
  • Structure of glassy Cu47.5Zr47.5Ag5 investigated with neutron diffraction with isotopic substitution, X-ray diffraction, EXAFS and reverse Monte Carlo simulation

    Structure of glassy Cu47.5Zr47.5Ag5 investigated with neutron diffraction with isotopic substitution, X-ray diffraction, EXAFS and reverse Monte Carlo simulation
    Jovari P., I. Kaban, B. Escher, K.K. Song, J. Eckert, B. Beuneu, M.A. Webb, N. Chen
    J. Non-Cryst. Solids, 459, 99-102 (2017)
  • Effect of annealing on the size dependent deformation behavior of thin cobalt films on flexible substrates

    Effect of annealing on the size dependent deformation behavior of thin cobalt films on flexible substrates
    Marx V.M., M.J. Cordill, D.M. Toebbens, C. Kirchlechner, G. Dehm
    Thin Solid Films, 624, 34-40 (2017)
  • Deformation mechanisms during severe plastic deformation of a Cu-Ag composite

    Deformation mechanisms during severe plastic deformation of a Cu-Ag composite
    Kormout K.S., P. Ghosh, V. Maier-Kiener, R. Pippan
    J. Alloy. Compd., 695, 2285-2294 (2017)
  • Additive Manufacturing: Reproducibility of Metallic Parts

    Additive Manufacturing: Reproducibility of Metallic Parts
    Prashanth K.G., S. Scudino, R.P. Chatterjee, O.O. Salman, J. Eckert
    TECHNOLOGIES, 5, ARTN 8 (2017)
  • Biocompatible 3D printed magnetic micro needles

    Biocompatible 3D printed magnetic micro needles
    Kavaldzhiev M., J.E. Perez, I. Ivanov, A. Bertoncini, C. Liberale, J. Kosel
    Biomedical Physics & Engineering Express, 3, ARTN 025005 (2017)
  • On room-temperature quasi-elastic mechanical behaviour of bulk metallic glasses

    On room-temperature quasi-elastic mechanical behaviour of bulk metallic glasses
    Louzguine-Luzgin D.V., V.Y. Zadorozhnyy, S.V. Ketov, Z. Wang, A.A. Tsarkov, A.L. Greer
    Acta Materialia, 129, 343-351 (2017)
  • In Situ X-Ray Synchrotron Profile Analysis During High Pressure Torsion of Ti

    In Situ X-Ray Synchrotron Profile Analysis During High Pressure Torsion of Ti
    Schafler E., M.B. Kerber, F. Spieckermann, T. Fischer, R. Schuster, C. von Baeckmann
    The Minerals, Metals & Materials Society 2017, Magnesium Technology 2017, 645-651 (2017)
  • Strength distribution and fracture analyses of LiNbO3and LiTaO3single crystals under biaxial loading

    Strength distribution and fracture analyses of LiNbO3and LiTaO3single crystals under biaxial loading
    Gruber M., I. Kraleva, P. Supancic, J. Bielen, D. Kiener, R. Bermejo
    Journal of the European Ceramic Society, 37, 4397-4406 (2017)
  • Structural instabilities during cyclic loading of ultrafine-grained copper studied with micro bending experiments

    Structural instabilities during cyclic loading of ultrafine-grained copper studied with micro bending experiments
    Kapp M.W., T. Kremmer, C. Motz, B. Yang, R. Pippan
    Acta Materialia, 125, 351-358 (2017)
  • A novel setup for wafer curvature measurement at very high heating rates

    A novel setup for wafer curvature measurement at very high heating rates
    Islam T., J. Zechner, M. Bernardoni, M. Nelhiebel, R. Pippan
    Rev. Sci. Instrum., 88, ARTN 024709 (2017)
  • Structural anisotropy in equal-channel angular extruded nickel revealed by dilatometric study of excess volume

    Structural anisotropy in equal-channel angular extruded nickel revealed by dilatometric study of excess volume
    Kotzurek J.A., W. Sprengel, M. Krystian, S. Simic, P. Poelt, A. Hohenwarter, R. Pippan, R. Wuerschum
    Int. J. Mater. Res., 108, 81-88 (2017)
  • Local melting to design strong and plastically deformable bulk metallic glass composites

    Local melting to design strong and plastically deformable bulk metallic glass composites
    Qin Y.S., X.L. Han, K.K. Song, Y.H. Tian, C.X. Peng, L. Wang, B.A. Sun, G. Wang, I. Kaban, J. Eckert
    Sci Rep, 7, ARTN 42518 (2017)
  • Nanoindentation testing as a powerful screening tool for assessing phase stability of nanocrystalline high-entropy alloys

    Nanoindentation testing as a powerful screening tool for assessing phase stability of nanocrystalline high-entropy alloys
    Maier-Kiener V., B. Schuh, E.P. George, H. Clemens, A. Hohenwarter
    MATERIALS & DESIGN, 115, 479-485 (2017)
  • Transmission electron microscopical study of teenage crown dentin on the nanometer scale

    Transmission electron microscopical study of teenage crown dentin on the nanometer scale
    Panfilov P., A. Kabanova, J. Guo, Z. Zhang
    Mater. Sci. Eng. C-Mater. Biol. Appl., 71, 994-998 (2017)
  • Effect of growth conditions on interface stability and thermophysical properties of sputtered Cu films on Si with and without WTi barrier layers

    Effect of growth conditions on interface stability and thermophysical properties of sputtered Cu films on Si with and without WTi barrier layers
    Souli I., V.L. Terziyska, J. Keckes, W. Robl, J. Zechner, C. Mitterer
    Journal of Vacuum Science and Technology B: Nanotechnology and Microelectronics, 35, ARTN 022201 (2017)
  • Co/Au multisegmented nanowires: a 3D array of magnetostatically coupled nanopillars

    Co/Au multisegmented nanowires: a 3D array of magnetostatically coupled nanopillars
    Bran C., Y.P. Ivanov, J. Kosel, O. Chubykalo-Fesenko, M. Vazquez
    Nanotechnology, 28, ARTN 095709 (7pp) (2017)
  • Microtexture Analysis of Restoration Mechanisms during High Pressure Torsion of Pure Nickel

    Microtexture Analysis of Restoration Mechanisms during High Pressure Torsion of Pure Nickel
    Ghosh P., O. Renk, R. Pippan
    Materials Science & Engineering A, 684, 101-109 (2017)
  • Self-Terminating Confinement Approach for Large-Area Uniform Monolayer Graphene Directly over Si/SiOX by Chemical Vapor Deposition

    Self-Terminating Confinement Approach for Large-Area Uniform Monolayer Graphene Directly over Si/SiOX by Chemical Vapor Deposition
    Pang J., R.G. Mendes, P.S. Wrobel, M.D. Wlodarski, H.Q. Ta, L. Zhao, L. Giebeler, B. Trzebicka, T. Gemming, L. Fu, Z. Liu, J. Eckert, A. Bachmatiuk, M.H. Ruemmeli
    ACS Nano, 11, 1946-1956 (2017)
  • The influence of microstructure on the cyclic deformation and damage of copper and an oxide dispersion strengthened steel studied via in-situ micro-beam bending

    The influence of microstructure on the cyclic deformation and damage of copper and an oxide dispersion strengthened steel studied via in-situ micro-beam bending
    Howard C., R. Fritz, M. Alfreider, D. Kiener, P. Hosemann
    Materials Science and Engineering A, 687, 313-322 (2017)
  • Effect of thermomechanical processing on the mechanical biofunctionality of a low modulus Ti-40Nb alloy

    Effect of thermomechanical processing on the mechanical biofunctionality of a low modulus Ti-40Nb alloy
    Helth A., S. Pilz, T. Kirsten, L. Giebeler, J. Freudenberger, M. Calin, J. Eckert, A. Gebert
    J. Mech. Behav. Biomed. Mater., 65, 137-150 (2017)
  • Composition optimization of low modulus and high-strength TiNb-based alloys for biomedical applications

    Composition optimization of low modulus and high-strength TiNb-based alloys for biomedical applications
    Okulov I.V., A.S. Volegov, H. Attar, M. Boenisch, S. Ehternam-Haghighi, M. Calin, J. Eckert
    J. Mech. Behav. Biomed. Mater., 65, 866-871 (2017)
  • Influence of testing orientation on mechanical properties of Ti45Nb deformed by high pressure torsion

    Influence of testing orientation on mechanical properties of Ti45Nb deformed by high pressure torsion
    Voelker B., N. Jaeger, M. Calin, M. Zehetbauer, J. Eckert, A. Hohenwarter
    MATERIALS & DESIGN, 114, 40-46 (2017)
  • Nanostructured coatings for tooling applications

    Nanostructured coatings for tooling applications
    Köpf A., J. Keckes, J. Todt, R. Pitonak, R. Weissenbacher
    International Journal of Refractory Metals and Hard Materials, 62, 219-224 (2017)
  • Micro-to-nano-scale deformation mechanism of a Ti-based dendritic-ultrafine eutectic alloy exhibiting large tensile ductility

    Micro-to-nano-scale deformation mechanism of a Ti-based dendritic-ultrafine eutectic alloy exhibiting large tensile ductility
    Okulov I.V., M. Boenisch, A.S. Volegov, H.S. Shahabi, H. Wendrock, T. Gemming, J. Eckert
    Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 682, 673-678 (2017)
  • Introduction

    Introduction
    Messing G.L., J. Eckert, L.S. Schadler
    Journal of Materials Research, 32, 1-1 (2017)
  • Deformation mechanisms to ameliorate the mechanical properties of novel TRIP/TWIP Co-Cr-Mo-(Cu) ultrafine eutectic alloys

    Deformation mechanisms to ameliorate the mechanical properties of novel TRIP/TWIP Co-Cr-Mo-(Cu) ultrafine eutectic alloys
    Kim J.T., S.H. Hong, H.J. Park, Y.S. Kim, J.Y. Suh, J.K. Lee, J.M. Park, T. Maity, J. Eckert, K.B. Kim
    Sci Rep, 7, ARTN 39959 (2017)
  • Accelerated thermo-mechanical fatigue of copper metallizations studied by pulsed laser heating

    Accelerated thermo-mechanical fatigue of copper metallizations studied by pulsed laser heating
    Wurster S., S. Bigl, M.J. Cordill, D. Kiener
    Microelectronic Engineering, 167, 110-118 (2017)
  • Buckle induced delamination techniques to measure the adhesion of metal dielectric interfaces

    Buckle induced delamination techniques to measure the adhesion of metal dielectric interfaces
    Kleinbichler A., J. Zechner, M.J. Cordill
    Microelectron. Eng., 167, 63-68 (2017)
  • Influence of extreme thermal cycling on metal-polymer interfaces

    Influence of extreme thermal cycling on metal-polymer interfaces
    Putz B., B. Voelker, C. Semprimoschnig, M.J. Cordill
    Microelectron. Eng., 167, 17-22 (2017)
  • Formation of nanostructured metallic glass thin films upon sputtering

    Formation of nanostructured metallic glass thin films upon sputtering
    Ketov S.V., R. Joksimovic, G. Xie, A. Trifonov, K. Kurihara, D.V. Louzguine-Luzgin
    Heliyon, 3, ARTN 00228 (2017)
  • Intrinsic behaviour of mode II and mode III long fatigue cracks in zirconium and the Ti-6Al-4V alloy

    Intrinsic behaviour of mode II and mode III long fatigue cracks in zirconium and the Ti-6Al-4V alloy
    Vojtek T., J. Pokluda, A. Hohenwarter, R. Pippan
    Solid State Phenomena, 258, 265-268 (2017)
  • Microstructure, mechanical behavior, and wear properties of FeCrMoVC steel prepared by selective laser melting and casting

    Microstructure, mechanical behavior, and wear properties of FeCrMoVC steel prepared by selective laser melting and casting
    Sander J., J. Hufenbach, L. Giebeler, M. Bleckmann, J. Eckert, U. Kuhn
    Scr. Mater., 126, 41-44 (2017)
  • Grain boundary design of thin films: Using tilted brittle interfaces for multiple crack deflection toughening

    Grain boundary design of thin films: Using tilted brittle interfaces for multiple crack deflection toughening
    Daniel R., M. Meindlhumer, W. Baumegger, J. Zalesak, B. Sartory, M. Burghammer, C. Mitterer, J. Keckes
    Acta Mater., 122, 130-137 (2017)
  • Improving strength and toughness of materials by utilizing spatial variations of the yield stress

    Improving strength and toughness of materials by utilizing spatial variations of the yield stress
    Sistaninia M., O. Kolednik
    Acta Mater., 122, 207-219 (2017)
  • Lifetime vs. rate capability: Understanding the role of FEC and VC in high-energy Li-ion batteries with nano-silicon anodes

    Lifetime vs. rate capability: Understanding the role of FEC and VC in high-energy Li-ion batteries with nano-silicon anodes
    Jaumann T., J. Balach, U. Langklotz, C. Sauchuk, M. Fritsch, A. Michaelis, V. Teltevskij, C. Mikhailova, S. Oswald, M. Klose, G. Stephani, R. Hauser, J. Eckert, L. Giebeler
    Energy Storage Materials, 6, 26-35 (2017)
  • Granulation of Bulk Metallic Glass Forming Alloys as a Feedstock for Thermoplastic Forming and their Compaction into Bulk Samples

    Granulation of Bulk Metallic Glass Forming Alloys as a Feedstock for Thermoplastic Forming and their Compaction into Bulk Samples
    Geissler D., J. Grosse, S. Donath, D. Ehinger, Stoica. M., J. Eckert, U. Kühn
    Materials Science Forum, 879, 589-594 (2017)

Master Thesis

  • Charakterisierung von neuen Schichtwerkstoffen auf Silizium mittels Nanoindentierung

    Charakterisierung von neuen Schichtwerkstoffen auf Silizium mittels Nanoindentierung
    Kampichler J.
    (2017)
  • Thermisch aktivierte Verformungsmechanismen untersucht mittels Druckversuchen an ultrafeingekörnten raumzentrierten Vanadium

    Thermisch aktivierte Verformungsmechanismen untersucht mittels Druckversuchen an ultrafeingekörnten raumzentrierten Vanadium
    Göbl M.
    (2017)
  • Fatigue Crack Growth Behavior of a Nanocrystalline Austenitic Steel

    Fatigue Crack Growth Behavior of a Nanocrystalline Austenitic Steel
    Pillmeier S.
    (2017)
  • The influence of deformation and proton-irradiation on the mechanical behavior in naonocrystalline stainless steels

    The influence of deformation and proton-irradiation on the mechanical behavior in naonocrystalline stainless steels
    Alfreider M.
    (2017)
  • Automated Image Processing for Residual Stress Measurements of Thin Films using MATLAB

    Automated Image Processing for Residual Stress Measurements of Thin Films using MATLAB
    Wurmshuber M.
    (2017)

Other

  • Phase Identification and Size Evaluation of Mechanically Alloyed Cu-Mg-Ni Powders

    Phase Identification and Size Evaluation of Mechanically Alloyed Cu-Mg-Ni Powders
    Kursun C., M. Gogebakan, M.S. Khoshkhoo, J. Eckert
    In: Nanostructured Materials - Fabrication to Applications, Intech (2017, Ch.3)
  • High pressure torsion

    High pressure torsion
    Pippan R. H.A.
    In: Rosochowski A., ed. Severe Plastic Deformation Technology, Whittles Publishing (2017, Chapter 4)
  • In Situ μLaue: Instrumental Setup for the Deformation of Micron Sized Samples

    In Situ μLaue: Instrumental Setup for the Deformation of Micron Sized Samples
    Kirchlechner C., J. Keckes, J.S. Micha, G. Dehm
    In: Neutrons and Synchrotron Radiation in Engineering Materials Science: From Fundamentals to Applications:, Wiley (2017, 425-438)