PhD Thesis
Bestimmung von Struktur-Eigenschafts-Beziehungen in nanostrukturierten dünnen Schichten mit Hilfe lokaler Charakterisierungsmethoden
Bestimmung von Struktur-Eigenschafts-Beziehungen in nanostrukturierten dünnen Schichten mit Hilfe lokaler Charakterisierungsmethoden. / Zeilinger, Angelika.
Leoben: Montanuniversität Leoben, 2014.
Conference Papers
Journal Articles
Influence of metastable retained austenite on macro and micromechanical properties of steel processed by the Q&P process
Influence of metastable retained austenite on macro and micromechanical properties of steel processed by the Q&P process. / Jirková, H; Mašek, B; Wagner, X et al.
in: Journal of Alloys and Compounds, Nr. 615, 05.12.2014, S. 163-168.A combinatorial X-ray sub-micron diffraction study of microstructure, residual stress and phase stability in TiAlN coatings
A combinatorial X-ray sub-micron diffraction study of microstructure, residual stress and phase stability in TiAlN coatings. / Riedl, A; Daniel, R; Todt, J et al.
in: Surface and Coatings Technology, Nr. 257, 25.10.2014, S. 108-113.On problems with the determination of the fracture resistance for materials with spatial variations of the Young’s modulus
On problems with the determination of the fracture resistance for materials with spatial variations of the Young’s modulus. / Fischer, R.D; Predan, J; Müller, R et al.
in: International Journal of Fracture, Nr. 190, 11.10.2014, S. 23-38.A new basis for the application of the J -integral for cyclically loaded cracks in elastic–plastic materials
A new basis for the application of the J -integral for cyclically loaded cracks in elastic–plastic materials. / Ochensberger, W; Kolednik, O.
in: International Journal of Fracture, Nr. 189, 15.08.2014, S. 77-101.Transmission electron microscope investigations on Cu-Ag alloys produced by high-pressure torsion
Transmission electron microscope investigations on Cu-Ag alloys produced by high-pressure torsion. / Kormout, K; Yang, B; Pippan, R.
in: Modelling and Simulation in Materials Science and Engineering, Nr. 63, 15.08.2014, S. 1-9.Microstructural evolution in immiscible alloys processed by High-Pressure Torsion
Microstructural evolution in immiscible alloys processed by High-Pressure Torsion. / Bachmaier, A; Neubauer, E; Kitzmantel, M et al.
in: Modelling and Simulation in Materials Science and Engineering, Nr. 63, 15.08.2014, S. 1-8.Microcantilever bending experiments in NiAl – Evaluation, size effects, and crack tip plasticity
Microcantilever bending experiments in NiAl – Evaluation, size effects, and crack tip plasticity. / Ast, J; Przybilla, T; Maier, V et al.
in: Journal of Materials Research, Nr. 29, 11.08.2014, S. 2129-2140.Experimental and Theoretical Confirmation of the Scaling Exponent 2 in Pyramidal Load Displacement Data for Depth Sensing Indentation
Experimental and Theoretical Confirmation of the Scaling Exponent 2 in Pyramidal Load Displacement Data for Depth Sensing Indentation. / Merle, B; Maier, V; Durst, K.
in: SCANNING, Nr. 36, 05.08.2014, S. 526-529.3D Morphology of Fracture Surfaces Created by Mixed-mode II+III Fatigue Loading in Metallic Materials
3D Morphology of Fracture Surfaces Created by Mixed-mode II+III Fatigue Loading in Metallic Materials. / Vojtek, T; Pokluda, J; Hohenwarter, A et al.
in: Procedia Engineering, Nr. 74, 15.07.2014, S. 74-77.Intrinsic and extrinsic size effects in the deformation of amorphous CuZr/nanocrystalline Cu nanolaminates
Intrinsic and extrinsic size effects in the deformation of amorphous CuZr/nanocrystalline Cu nanolaminates. / Guo, W; Jägle, E; Yao, J et al.
in: Acta Materialia, Nr. 80, 12.07.2014, S. 94-106.Superior oxidation resistance, mechanical properties and residual stresses of an Al-rich nanolamellar Ti<sub>0.05</sub>Al<sub>0.95</sub>N coating prepared by CVD
Superior oxidation resistance, mechanical properties and residual stresses of an Al-rich nanolamellar Ti<sub>0.05</sub>Al<sub>0.95</sub>N coating prepared by CVD. / Todt, J; Pitonak, R; Köpf, A et al.
in: Surface and Coatings Technology, Nr. 258, 11.07.2014, S. 1119-1127.Direct evidence for grain boundary motion as the dominant restoration mechanism in the steady-state regime of extremely cold-rolled copper
Direct evidence for grain boundary motion as the dominant restoration mechanism in the steady-state regime of extremely cold-rolled copper. / Renk, O; Hohenwarter, A; Wurster, S et al.
in: Acta Materialia, Nr. 77, 11.07.2014, S. 401-410.Evolution of residual stress and damage in coated hard metal milling inserts over the complete tool life
Evolution of residual stress and damage in coated hard metal milling inserts over the complete tool life. / Teppernegg, T; Klünsner, T; Angerer, P et al.
in: International Journal of Refractory Metals and Hard Materials, Nr. 47, 09.07.2014, S. 80-85.Critical assessment of the determination of residual stress profiles in thin films by means of the ion beam layer removal method
Critical assessment of the determination of residual stress profiles in thin films by means of the ion beam layer removal method. / Schöngrundner, R; Treml, R; Antretter, T et al.
in: Thin Solid Films, Nr. 564, 09.06.2014, S. 321-330.New insights into single-grain mechanical behavior from temperature-dependent 3-D coherent X-ray diffraction
New insights into single-grain mechanical behavior from temperature-dependent 3-D coherent X-ray diffraction. / Vaxelaire, N; Labat, S; Cornelius, T.W et al.
in: Acta Materialia, Nr. 78, 04.06.2014, S. 46-55.Influence of heat treatment on the microstructural evolution of Al–3 wt.% Cu during high-pressure torsion
Influence of heat treatment on the microstructural evolution of Al–3 wt.% Cu during high-pressure torsion. / Hohenwarter, A; Faller, M; Rashkova, B et al.
in: Philosophical Magazine Letters, Nr. 94, 03.06.2014, S. 342-350.Microstructural evolution of a focused ion beam fabricated Mg nanopillar at high temperatures: Defect annihilation and sublimation
Microstructural evolution of a focused ion beam fabricated Mg nanopillar at high temperatures: Defect annihilation and sublimation. / Jeong, J; Lee, S; Kim, Y et al.
in: Scripta Materialia, Nr. 86, 29.05.2014, S. 44-47.Mono-textured nanocrystalline thin films with pronounced stress-gradients: On the role of grain boundaries in the stress evolution
Mono-textured nanocrystalline thin films with pronounced stress-gradients: On the role of grain boundaries in the stress evolution. / Daniel, R; Jäger, E; Todt, J et al.
in: Journal of Applied Physics, Nr. 115, 27.05.2014, S. 203507-1-9.New insights on the formation of supersaturated solid solutions in the Cu–Cr system deformed by high-pressure torsion
New insights on the formation of supersaturated solid solutions in the Cu–Cr system deformed by high-pressure torsion. / Bachmaier, A; Rathmayr, G.B; Bartosik, M et al.
in: Acta Materialia, Nr. 69, 15.05.2014, S. 301-313.A novel laboratory test rig for probing the sensitivity of rail steels to RCF and wear – first experimental results
A novel laboratory test rig for probing the sensitivity of rail steels to RCF and wear – first experimental results. / Kammerhofer, C; Hohenwarter, A; Pippan, R.
in: Wear, Nr. 316, 02.05.2014, S. 101-108.Differences in deformation behavior of bicrystalline Cu micropillars containing a twin boundary or a large-angle grain boundary
Differences in deformation behavior of bicrystalline Cu micropillars containing a twin boundary or a large-angle grain boundary. / Imrich, P.J; Kirchlechner, C; Motz, C et al.
in: Acta Materialia, Nr. 73, 10.04.2014, S. 240-250.Fracture and R-curve behavior of an intermetallic b-stabilized TiAl alloy with different nearly lamellar microstructures
Fracture and R-curve behavior of an intermetallic b-stabilized TiAl alloy with different nearly lamellar microstructures. / Leitner, T; Schloffer, M; Mayer, S et al.
in: Intermetallics, Nr. 53, 10.04.2014, S. 1-9.Enhanced toughness and stable crack propagation in a novel tungsten fibre-reinforced tungsten composite produced by chemical vapour infiltration
Enhanced toughness and stable crack propagation in a novel tungsten fibre-reinforced tungsten composite produced by chemical vapour infiltration. / Riesch, J; Höschen, T; Linsmeier, C et al.
in: Physica Scripta, Nr. 159, 01.04.2014, S. 1-7.Die Versagensmechanismen pressgehärteter und hochfester Stähle im Dreipunkt-Biegeversuch
Die Versagensmechanismen pressgehärteter und hochfester Stähle im Dreipunkt-Biegeversuch. / Benedyk, K.B; Pichler, A; Kurz, T et al.
in: Berg- und Hüttenmännische Monatshefte, Nr. 159, 15.03.2014, S. 122-129.Near-threshold behaviour of shear-mode fatigue cracks in metallic materials
Near-threshold behaviour of shear-mode fatigue cracks in metallic materials. / Pokluda, J; Pippan, R; Vojtek, T et al.
in: Fatigue and Fracture of Engineering Materials and Structures, Nr. 37, 10.03.2014, S. 232-254.Growth mechanism of Al2Cu precipitates during in situ TEM heating of a HPT deformed Al–3wt.%Cu alloy
Growth mechanism of Al2Cu precipitates during in situ TEM heating of a HPT deformed Al–3wt.%Cu alloy. / Rashkova, B; Faller, M; Pippan, R et al.
in: Journal of Alloys and Compounds, Nr. 600, 26.02.2014, S. 43-50.Evolution of the ω<sub>o</sub> phase in a β-stabilized multi-phase TiAl alloy and its effect on hardness
Evolution of the ω<sub>o</sub> phase in a β-stabilized multi-phase TiAl alloy and its effect on hardness. / Schloffer, M; Rashkova, B; Schöberl, T et al.
in: Acta Materialia, Nr. 64, 15.01.2014, S. 241-252.Depth-resolved residual stress analysis with high-energy synchrotron X-rays using a conical slit cell
Depth-resolved residual stress analysis with high-energy synchrotron X-rays using a conical slit cell. / Staron, P; Fischer, T; Keckes, J et al.
in: Materials Science Forum, Nr. 768-769, 15.01.2014, S. 72-75.Macroscopic Fracture Behaviour of CrN Hard Coatings Evaluated by X-Ray Diffraction Coupled with Four-Point Bending
Macroscopic Fracture Behaviour of CrN Hard Coatings Evaluated by X-Ray Diffraction Coupled with Four-Point Bending. / Stefenelli, M; Riedl, A; Todt, J et al.
in: Materials Science Forum, Nr. 768-769, 15.01.2014, S. 272-279.Recovery of electrical resistance in copper films on polyethylene terephthalate subjected to a tensile strain
Recovery of electrical resistance in copper films on polyethylene terephthalate subjected to a tensile strain. / Glushko, O; Marx, V.M; Kirchlechner, C et al.
in: Thin Solid Films, Nr. 552, 15.01.2014, S. 141-145.Reversible cyclic deformation mechanism of gold nanowires by twinning–detwinning transition evidenced from in situ TEM
Reversible cyclic deformation mechanism of gold nanowires by twinning–detwinning transition evidenced from in situ TEM. / Lee, S; Im, J; Yoo, Y et al.
in: Nature Communications, Jahrgang 5:3033, 08.01.2014, S. 1-10.