Österreichische Akademie der Wissenschaften
ESI
  • Instagram
    • DE
    • EN
  • Institute
    • News
    • About
    • Staff
    • Open Positions
    • Organisation
    • Contact
  • Research
    • Tailoring Functional Properties
    • Plasticity Fracture Fatigue
    • Multiscale Mechanics
    • Structural & Interface Engineering
    • Non-equilibrium Materials Design
    • Archiv
  • Facilities
    • Deformation
    • Electron and ion microscopes
    • Macroscale Testing Devices
    • Magnetic/Physical properties
    • Material synthesis and processing
    • Mechanical Testing
    • Mesoscale In-situ Devices
    • Metallography Equipment
    • Micromechanical testing equipment
    • Surface analysis
    • Transmission Electron Microscopy
    • Workshop
    • X-ray diffraction
  • Publications
    • 2024
    • 2023
    • 2022
    • 2021
    • 2020
    • 2019
    • 2018
    • 2017
    • 2016
    • 2015
    • 2014
    • 2013
    • 2012
    • 2011
    • 2010 and before
    • Lectures
  • Colloquium
    • Recent
    • Archive
    • Other Colloquia
  • Instagram
    • DE
    • EN

Publications

  • 2024
  • 2023
  • 2022
  • 2021
  • 2020
  • 2019
  • 2018
  • 2017
  • 2016
  • 2015
  • 2014
  • 2013
  • 2012
  • 2011
  • 2010 and before
  • Lectures
  • ESI
  • Publications
    • 2019
    • 2024
    • 2023
    • 2022
    • 2021
    • 2020
    • 2019
    • 2018
    • 2017
    • 2016
    • 2015
    • 2014
    • 2013
    • 2012
    • 2011
    • 2010 and before
    • Lectures

Publications 2019

PhD Thesis

PhD Thesis

  • High Pressure Torsion Deformation of Nanocarbon-reinforced Metal Matrix Composites
    Katzensteiner A.
    (2019)
    RIS ENW BIB
  • Implementation of femtosecond laser processing for materials testing and research
    Pfeifenberger M.
    (2019)
    RIS ENW BIB

Conference Papers

Conference Papers

Journal Articles

Journal Articles

  • Inconel-steel multilayers by liquid dispersed metal powder bed fusion: Microstructure, Residual stress and Property Gradients
    Bodner S.C., L. van der Vorst, J. Zalesak, J. Todt, J.F. Keckes, V. Maier-Kiener, B. Sartory, N. Schell, J. Hooijmans, J. Saurwalt, J. Keckes
    Additive Manufacturing, 32, ARTN 101027 (2019)
    DOI RIS ENW BIB
  • Novel a + b Type Ti-Fe-Cu Alloys Containing Sn with Pertinent Mechanical Properties
    Zadorozhnyy V., S. Ketov, T. Wada, S. Wurster, V. Nayak, D. Louzguine-Luzgin, J. Eckert, H. Kato
    metals, 10, 1-12 (2019)
    DOI RIS ENW BIB
  • Electrocatalytic Behavior of Hydrogenated Pd-Metallic Glass Nanofilms: Butler-Volmer, Tafel, and Impedance Analyses
    Sarac B., T. Karazehir, M. Mühlbacher, A. Darac, J. Eckert
    Electrocatalysis, 11, 94-109 (2019)
    DOI RIS ENW BIB
  • Reversing and non-reversing effects of PEEK-HA composites on tuning cooling rate during crystallization
    Dey S., S. Chatterjee, F. Spieckermann, P. Ghosh, S. Samanta
    J. Polym. Res., 26, ARTN 279 (2019)
    DOI RIS ENW BIB
  • Fatique crack growth in railway axle specimens - Transferability and model validation
    Simunek D., M. Leitner, M. Rieger, R. Pippan, H.P. Gänser, F.J. Weber
    International Journal of Fatigue, 133, ARTN 105421 (2019)
    DOI RIS ENW BIB
  • Combined Fe and O effects on microstructural evolution and strengthening in Cu-Fe nanocrystalline alloys
    Guo J., Q. Shao, O. Renk, L. Li, Y. He, Z. Zhang, R. Pippan
    Materials Science & Engineering, 772, ARTN 138800 (2019)
    DOI RIS ENW BIB
  • In situ fabrication of TiC-NiCr cermets by selective laser melting
    Aramian A., Z. Sadeghian, K. Prashanth, F. Berto
    International Journal of Refractory Metals & Hard Materials, 87, ARTN 105171 (2019)
    DOI RIS ENW BIB
  • Understanding structural evolution of nanostructures during deformation form 2D (3D) Experiments
    Renk O., M. Kapp, R. Pippan
    IOP Conference SeriesMaterials Science and Engineering, 580, ARTN 012021 (2019)
    DOI RIS ENW BIB
  • Ultrafine-grained Tungsten by High-Pressure Torsion-Bulk precursor versus powder processing route
    Wurmshuber M., S. Doppermann, S. Wurster, D. Kiener
    IOP Conference Series: Materials Science and Engineering, 580, ARTN 012051 (2019)
    DOI RIS ENW BIB
  • Application of the material inhomogeneity effect for the improvement of fracture toughness of a brittle polymer
    Tiwari A., J. Wiener, F. Arbeiter, G. Pinter, Ol Kolednik
    Engineering Fracture Mechanics, 224, ARTN 106776 (2019)
    DOI RIS ENW BIB
  • Stress-controlled decomposition routes in cubic AlCrN films assessed by in-situ high-temperature high-energy grazing incidence transmission X-ray diffraction
    Meindlhumer M., S. Klima, N. Jäger, A. Stark, H. Hruby, C. Mitterer, J. Keckes, R. Daniel
    Scientific ReportsNature, 9, ARTN 18027 (2019)
    DOI RIS ENW BIB
  • Microstructure and stress gradients in TiW thin films characterized by 40 nm X-ray diffraction and transmission electron microscopy
    Saghaeian F., J. Keckes, S. Woehlert, M. Rosenthal, M. Reisinger, J. Todt
    Thin Solid Films, 691, ARTN 137576 (2019)
    DOI RIS ENW BIB
  • Novel welding of Al0.5CoCrFeNi high-entropy alloy: Corrosion behavior
    Sokkalingam R., K. Sivaprasad, M. Duraiselvam, V. Muthupandi, K. Prashanth
    Journal of Alloys and Compounds, 817, ARTN 153163 (2019)
    DOI RIS ENW BIB
  • Growth-twins in CrN/AlN multilayers induced by hetero-phase interfaces
    Chen Z., Q. Shao, M. Bartosik, P. Mayrhofer, H. Chen, Z. Zhang
    Acta Materialia, 185, 157-170 (2019)
    DOI RIS ENW BIB
  • The sputter performance of an industrial-scale planar Mo-target over its lifetime: Target erosion and film properties
    Rausch M., A. Sabag, K. Pichler, G. Gruber, J. Köstenbauer, H. Köstenbauer, P. Kreiml, M. Cordill, J. Winkler, C. Mitterer
    Surface & Coatings Technology, 381, ARTN 125174 (2019)
    DOI RIS ENW BIB
  • Biegsames Glas statt Scherben
    Cordill M.
    Kronen Zeitung, 19 (2019)
    RIS ENW BIB
  • Investigation of high cyclic fatigue behaviour of thin copper films using MEMS structure
    Saghaeian F., M. Lederer, A. Hofer, J. Todt, J. Keckes, G. Khatibi
    Int. J. Fatigue, 128, ARTN 105179 (2019)
    DOI RIS ENW BIB
  • Effect of Re on microstructural evolution and densification kinetics during spark plasma sintering of nanocrystalline W
    Pramanik S., A. Srivastav, B. Jolly, N. Chawake, B.S. Murty
    Adv. Powder Technol., 30, 2779-2786 (2019)
    DOI RIS ENW BIB
  • Combined thermo-physical investigations of thin layers with Time Domain Thermoreflectance and Scanning Thermal Microscopy on the example of 500 nm thin, CVD grown tungsten
    Fladischer K., V. Leitgeb, L. Mitterhuber, G. Maier, J. Keckes, M. Sagmeister, S. Carniello, S. Defregger
    Thermochim. Acta, 681, ARTN 178373 (2019)
    DOI RIS ENW BIB
  • Highly ductile amorphous oxide at room temperature and high strain rate
    Frankberg E., J. Kalikka, F. Ferre, L. Joly-Pottuz, T. Salminen, J. Hintikka, M. Hokka, S. Koneti, T. Douillard, B. Le Saint, P. Kreiml, M. Cordill, T. Epicier, D. Stauffer, M. Vanazzi, L. Roiban, J. Akola, F. Di Fonzo, E. Levanen, K. Masenelli-Varlot
    Science, 366, 864-869 (2019)
    DOI RIS ENW BIB
  • Bioinspired toughness improvement through soft interlayers in mineral reinforced polypropylene
    Wiener J., F. Arbeiter, A. Tiwari, O. Kolednik, G. Pinter
    Mechanics of Materials, 1 40, ARTN 103243 (2019)
    DOI RIS ENW BIB
  • Tuneable Magneto-Resistance by Severe Plastic Deformation
    Wurster S., L. Weissitsch, M. Stückler, P. Knoll, H. Krenn, R. Pippan, A. Bachmaier
    metals, 2019, ARTN 1188 (2019)
    DOI RIS ENW BIB
  • Aluminum matrix composites reinforced with metallic glass particles with core-shell structure
    Guan H., C. Li, K. Prashanth, J. Tan, J. Eckert, J. Tao, J. Yi
    Materials Science & Engineering, A 771, ARTN 138630 (2019)
    DOI RIS ENW BIB
  • On the Room-Temperature Mechanical Properties of an Ion-Irradiated TiZrNbHfTa Refractory High Entropy Alloy
    Moschetti M., A. Xu, B. Schuh, A. Hohenwarter, J.P. Couzinie, J. Kruzic, D. Bhattacharyya, B. Gludovatz
    JOM, 2019, ARTN 3861-6 (2019)
    DOI RIS ENW BIB
  • Development of Damage - Tolerant and Fracture-Resistant Materials by Utilizing the Material Inhomogeneity Effect
    Kolednik O., R. Kasberger, M. Sistaninia, J. Predan, M. Kegl
    ASMEJournal of Applied Mechanics, 86, 111004-1-111004-12 (2019)
    DOI RIS ENW BIB
  • Evolution of Bimodal Microstructure and High-Temperature Wear Resistance of Al-Cu-Ni Alloys
    Maity S., D. Chanda, P. Ramasamy, B. Show, J. Eckert, S. Bera
    Communication, A, ARTN 5518 (2019)
    DOI RIS ENW BIB
  • Effect of Heterophase Interfaces on Microstructure and Crystallographic Texture Evolution During Rolling of Directionally Solidified Ag-Cu Eutectic Alloy
    Li J., J. Li, O. Renk, R. Pippan, P. Ghosh
    Metall. Mater. Trans. A-Phys. Metall. Mater. Sci., 51, 368-379 (2019)
    DOI RIS ENW BIB
  • Optimizing the magnetic properties of Fe-based amorphous powder by adjusting atomic structures from vitrification at different temperatures
    Kim S., H. Oh, H. Kim, A. Lee, H.-J. Kim, S. Yang, Y. Kim, H. Choi, I. Kim, H.-G. Kim, J. Eckert, J. Kim, M. Lee
    Journal of Applied Physics, 126, ARTN 165109 (2019)
    DOI RIS ENW BIB
  • Damage tolerance of lamellar bone
    Razi H., J. Predan, F. Fischer, O. Kolednik, P. Fratzl
    Bone, 130, ARTN 115102 (2019)
    DOI RIS ENW BIB
  • Point-defect engineering of MoN/TaN superlattice films: A first-principles and experimental study
    Koutna N., R. Hahn, J. Zalesak, M. Friak, M. Bartosik, J. Keckes, M. Sob, P. Mayrhofer, D. Holec
    Mater. Des., 186, ARTN 108211 (2019)
    DOI RIS ENW BIB
  • High density of genuine growth twins in electrodeposited aluminium
    Rafailovic L., C. Gammer, C. Ebner, C. Rentenberger, A. Jovanovic, I. Pasti, N. Skorodumova, H. Karnthaler
    Materials Science, 5, eaax3894 (2019)
    DOI RIS ENW BIB
  • Mechanical properties and epitaxial growth of TiN/AlN superlattices
    Fallman M., Z. Chen, Z.L. Zhang, P.H. Mayrhofer, M. Bartosik
    Surf. Coat. Technol., 375, 1-7 (2019)
    DOI RIS ENW BIB
  • New Developments in Nanomechanical Methods
    Wharry J., M. Cordill
    JOM, 71, 3340-3342 (2019)
    DOI RIS ENW BIB
  • CROSS-SECTIONAL GRADIENTS OF RESIDUAL STRESSES, MICROSTRUCTURE AND PHASES IN A NITRIDED STEEL REVEALED BY 20 mu m SYNCHROTRON X-RAY DIFFRACTION
    Bodner S.C., T. Ziegelwanger, M. Meindlhumer, J. Holcova, J. Todt, N. Schell, J. Keckes
    Metall. Ital., 6-10 (2019)
    RIS ENW BIB
  • Hierarchically-structured large superelastic deformation in ferroelastic-ferroelectrics
    Deng Y., C. Gammer, J. Ciston, P. Ercius, C. Ophus, K. Bustillo, C. Song, R. Zhang, D. Wu, Y. Du, Z. Chen, H. Dong, A. Khachaturyan, A. Minor
    Acta Materialia, 181/2019, 501-509 (2019)
    DOI RIS ENW BIB
  • Au–Sn solders applied in transient liquid phase bonding: Microstructure and mechanical behavior
    Du C., R. Soler, B. Völker, K. Matoy, J. Zechner, G. Langer, M. Reisinger, J. Todt, C. Kirchlechner, G. Dehm
    Materialia, 8, ARTN 100503 (2019)
    DOI RIS ENW BIB
  • Coiled artificial muscles based on UHMWPE with large muscle stroke
    Maksimkin A., I. Larin, D. Chukov, M. Zadorozhnyy, T. Dayyoub, V. Zadorozhnyy, F. Spieckermann, V. Soprunyuk
    Materials Today Communications, 21 (2019), ARTN 100688 (2019)
    DOI RIS ENW BIB
  • Microstructural characterization of medium entropy alloy thin films
    Chawake N., J. Zalesak, C. Gammer, R. Franz, M. Cordill, J. Kim, J. Eckert
    Scripta Materialia, 177, 22-26 (2019)
    DOI RIS ENW BIB
  • Correlation of mechanical damage and electrical behavior of Al/Mo bilayers subjected to bending
    Kreiml P., M. Rausch, V. Terziyska, H. Koestenbauer, J. Winkler, C. Mitterer, M. Cordill
    Thin Solid Films, 687, UNSP 137480 (2019)
    DOI RIS ENW BIB
  • Water in Mesoporous Confinement: Glass-To-Liquid Transition or Freezing of Molecular Reorientation Dynamics?
    Schranz W., V. Soprunyuk
    Molecules, 24/2019, ARTN 3563 (2019)
    DOI RIS ENW BIB
  • The Influence of Partial Replacement of Cu with Ga on the Corrosion Behavior of Ti40Zr10Cu36Pd14 Metallic Glasses
    Wei Q., P. Gostin, O. Addison, D. Reed, M. Calin, S. Bera, P. Ramasamy, A. Davenport
    Journal of The Electrochemical Society, 166, 485-491 (2019)
    DOI RIS ENW BIB
  • Mechanochemical reaction of Al and melamine: a potential approach towards the in situ synthesis of aluminum nitride - carbon nanotube nanocomposites
    Rounaghi S., H. Eshghi, S. Scudino, E. Esmaeili, A. Kiani-Rashid, J. Eckert
    PCCP, 21, 22121-22131 (2019)
    DOI RIS ENW BIB
  • The creep behavior of a fully lamellar γ-TiAl based alloy
    Burtscher M., T. Klein, S. Mayer, H. Clemens, F. Fischer
    Intermetallics, 114, ARTN 106611 (2019)
    DOI RIS ENW BIB
  • Microstructure and mechanical property of bimodal-size metallic glass particle-reinforced Al alloy matrix composites
    Xie M., Z. Wang, G. Zhang, C. Yang, W. Zhang, K. Prashanth
    Journal of Alloys and Compounds, 814, ARTN 152317 (2019)
    DOI RIS ENW BIB
  • Correlating elemental distribution with mechanical properties of TiN/SiNx nanocomposite coatings
    Sperr M., Z.L. Zhang, Y.P. Ivanov, P.H. Mayrhofer, M. Bartosik
    Scr. Mater., 170, 20-23 (2019)
    DOI RIS ENW BIB
  • Elastic Properties and Stacking Fault Energies of Borides, Carbides and Nitrides from First-Principles Calculations
    Zhang Y., Z. Liu, D. Yuan, Q. Shao, J. Chen, C. Wu, Z. Zhang
    Acta Metall. Sin.-Engl. Lett., 32, 1099-1110 (2019)
    DOI RIS ENW BIB
  • Friction and Tribo-Chemical Behavior of SPD-Processed CNT-Reinforced Composites
    Aristizabal K., A. Tayrac, A. Katzensteiner, A. Bachmaier, S. Suarez
    LUBRICANTS, 7, ARTN 75 (2019)
    DOI RIS ENW BIB
  • Mechanical Behavior of Ti6Al4V Scaffolds Filled with CaSiO3 for Implant Applications
    Rahmani R., M. Antonov, L. Kollo, Y. Holovenko, Prashanth K.
    applied sciences, 2019, ARTN 3844 (2019)
    DOI RIS ENW BIB
  • Investigation of Compatibility Between M-Cr-Al-X Thermal Spray Coatings and Third Generation y-TiAl Alloys
    Mazilin I., N. Zaitsev, A. Artamonov, L. Baldaev, V. Zadorozhnyy, M. Gorshenkov, A. Stepashkin, V. Sudarchikov, S. Kaloshkin
    Journal of Materials Engineering and Performance, 8, 1059-9495 (2019)
    DOI RIS ENW BIB
  • Effect of lattice surface treatment on performance of hardmetal - titanium interpenetrating phase composites
    Holovenko Y., L. Kollo, M. Saarna, R. Rahmani, T. Soloviova, M. Antonov, K. Prashanth, S. Cygan, R. Veinthal
    International Journal of Refractory Metals & Hard Materials, 86, ARTN 105087 (2019)
    DOI RIS ENW BIB
  • Tungsten Matrix Composite Reinforced with CoCrFeMnNi High-Entropy Alloy: Impact of Processing Routes on Microstructure and Mechanical Properties
    Satyanarayana P., R. Sokkalingam, P. Jena, K. Sivaprasad, K. Prashanth
    metals, 9, 12 (2019)
    DOI RIS ENW BIB
  • Fracture behavior and deformation mechanisms in nanolaminated crystalline/amorphous micro-cantilevers
    Wang Y., R. Fritz, D. Kiener, J. Zhang, G. Liu, O. Kolednik, R. Pippan, J. Sun
    ElsevierActa Materialia, 180 (2019), 73-83 (2019)
    DOI RIS ENW BIB
  • Thermodynamic and mechanical stability of Ni3X-type intermetallic compounds
    Kulo N., S. He, W. Ecker, R. Pippan, T. Antretter, V. Razumovskiy
    ElsevierIntermetallics, 9 (2019)
    DOI RIS ENW BIB
  • Toughening in nanosilica-reinforced epoxy with tunable filler-matrix interface properties
    Picu C., K. Krawczyk, Z. Wang, H. Pishvazadeh-Moghaddam, M. Sieberer, A. Lassnig, W. Kern, A. Hadar, D. Constantinescu
    Compos. Sci. Technol., 183, ARTN 107799 (2019)
    DOI RIS ENW BIB
  • Atomic resolution analyses on defects in nanocrystalline Cu-based alloys generated by severe plastic deformation
    Zhang Y., Z. Xu, W. Ming, J. Guo, Z. Zhang, J. Chen
    Mater. Charact., 157, ARTN 109886 (2019)
    DOI RIS ENW BIB
  • Selective laser melting of 316L stainless steel: Influence of TIB2 addition on microstructure and mechanical properties
    Salman O., C. Gammer, J. Eckert, M. Salih, E. Abdulsalam, K. Prashanth, S. Scudino
    Materials Today CommunicationsElsevier, 21, 100615 (2019)
    DOI RIS ENW BIB
  • Quasicrystalline Composites by Additive Manufacturing
    Prashanth K., S. Scudino
    Key Engineering Materials, 818, 72-76 (2019)
    DOI RIS ENW BIB
  • Modulating heterogeneity and plasticity in bulk metallic glasses: Role of interfaces on shear banding
    Kosiba K., D. Sopu, S. Scudino, L. Zhang, J. Bednarcik, S. Pauly
    Int. J. Plast., 119, 156-170 (2019)
    DOI RIS ENW BIB
  • Investigation of structure and mechanical properties of TiZrHfNiCuCo high entropy alloy thin films synthesized by magnetron sputtering
    Kim Y., H. Park, S. Mun, E. Jumaev, S. Hong, G. Song, J. Kim, Y. Park, K. Kim, S. Jeong, Y. Kwon, K. Kim
    J. Alloy. Compd., 797, 834-841 (2019)
    DOI RIS ENW BIB
  • 20 Hz synchrotron X-ray diffraction analysis in laser-pulsed WC-Co hard metal reveals oscillatory stresses and reversible composite plastification
    Gruber D., D. Kiefer, R. Roessler, F. Beckmann, M. Tkadletz, T. Kluensner, C. Czettl, J. Keckes, J. Gibmeier
    Int. J. Refract. Met. Hard Mat., 82, 121-128 (2019)
    DOI RIS ENW BIB
  • Evolution of the lattice defects and crystalline domain size in carbon nanotube metal matrix composites processed by severe plastic deformation
    Aristizabal K., A. Katzensteiner, M.: Leoni, F. Muecklich, S. Suarez
    Mater. Charact., 154, 344-352 (2019)
    DOI RIS ENW BIB
  • Microstructure and mechanical properties of Al-12Si and Al-3.5 Cu-1.5Mg-1Si bimetal fabricated by selective laser melting
    Wang P., C. Lao, Z. Chen, Y. Liu, H. Wang, H. Wendrock, J. Eckert, S. Scudino
    Journal of Materials Science & Technology, 36, 18-26 (2019)
    DOI RIS ENW BIB
  • Facile preparation of superhydrophobic wood surfaces via spraying of aqueous alkyl ketene dimer dispersions
    Arminger B., W. Gindl-Altmutter, J. Keckes, C. Hansmann
    RSC ADVANCES, 9, 24357-24367 (2019)
    DOI RIS ENW BIB
  • Compositional tuning-induced permanent color adjustment and mechanical properties: Binary Cu-Mg colored metallic system
    Jeong Y., J. Kim, S. Hong, H. Lee, S. Choi, K. Kim
    Mater. Des., 175, ARTN 107814 (2019)
    DOI RIS ENW BIB
  • Synthesis of new glassy Mg-Ca-Zn alloys with exeptionally low Young´s Modulus: Exploring near eutectic compositions
    Bera S., S. Paul, P. Ramasamy, D. Mandal, M. Das, A. Lassnig, O. Renk, M. Calin, J. Eckert
    Scripta MaterialiaScience Direct, 173, 137-143 (2019)
    DOI RIS ENW BIB
  • Resolving the FCC/HCP interfaces of the gamma '(Ag2Al) precipitate phase in aluminium
    Zhang Z., J. Rosalie, N. Medhekar, L. Bourgeois
    Acta Mater., 174, 116-130 (2019)
    DOI RIS ENW BIB
  • A Novel Setup for In Situ Monitoring of Thermomechanically Cycled Thin Film Metallizations
    Moser S., G. Zernatto, M. Kleinbichler, M. Nelhiebel, J. Zechner, M. Cordill, R. Pippan
    The Minerals, Metals & Materials SocietyJOM, ARTN: 1543-1851 (2019)
    DOI RIS ENW BIB
  • Face centered cubic titanium in high pressure torsion processed carbon nanotubes reinforced titanium composites
    Li F., P. Chen, Z. Chen, P. Hao, J. Yi, K. Prashanth, J. Eckert
    ElsevierJournal of Alloys and Compounds, 939-945 (2019)
    DOI RIS ENW BIB
  • Face centered cubic titanium in high pressure torsion processed carbon nanotubes reinforced titanium composites
    Li F., P. Chen, Z. Chen, P. Hao, J. Yi, K. Prashanth, J. Eckert
    Journal of Alloys and Compounds, 939-945 (2019)
    DOI RIS ENW BIB
  • Evaluation of hydrogen storage perfomance of ZrTiVNiCrFe in electrochemical and gas-solid reactions
    Zadorozhnyy V., B. Sarac, E. Berdonosova, T. Karazehir, A. Lassnig, C. Gammer, M. Zadorozhnyy, S. Ketov, S. Klyamkin, J. Eckert
    International Journal of Hydrogen Energy, 2019, ARTN 0360-3199 (2019)
    DOI RIS ENW BIB
  • Anisotropy in fracture and fatigue resistance of pearlitic steels and its effect on the crack path
    Leitner T., A. Hohenwarter, R. Pippan
    Int. J. Fatigue, 124, 528-536 (2019)
    DOI RIS ENW BIB
  • On the onset of deformation twinning in the CrFeMnCoNi high-entropy alloy using a novel tensile specimen geometry
    Thurston K., A. Hohenwarter, G. Laplanche, E.P. George, B. Gludovatz, R.O. Ritchie
    Intermetallics, 110, UNSP 106469 (2019)
    DOI RIS ENW BIB
  • Comparison of the Dislocation Structure of a CrMnN and a CrNi Austenite after Cyclic Deformation
    Fluch R., M. Kapp, K. Spiradek-Hahn, M. Brabetz, H. Holzer, R. Pippan
    metals 2019, 9, ARTN 784 (2019)
    DOI RIS ENW BIB
  • Evaluation of the intergranular crack growth resistance of ultrafine grained tungsten materials
    Pfeifenberger M., V. Nikolic, S. Zak, A. Hohenwarter, R. Pippan
    Actra Materialia, 176, 330-340 (2019)
    DOI RIS ENW BIB
  • Impact of the scanning strategy on the mechanical behavior of 316L steel synthesized by selective laser melting
    Salman O., F. Brenne, T. Niendorf, J. Eckert, K. Prashanth, T. He, S. Scudino
    Journal of Manufacturing Processes, 255-261 (2019)
    DOI RIS ENW BIB
  • Microstructure and Mechanical Properties of Al-(12-20) Si Bi-Material Fabricated by Selective Laser Melting
    Zhang S., P. Ma, Y. Jia, Z. Yu, R. Sokkalingam, X. Shi, P. Ji, J. Eckert, K.G. Prashanth
    materials, 12, ARTN 2126 (2019)
    DOI RIS ENW BIB
  • Influence of crystal orientation and Berkovich trip rotation on the mechanical characterization of grain boundaries in molybdenum
    Jakob S., A. Leitner, A. Lorich, M. Eidenberger-Schober, W. Knabl, R. Pippan, H. Clemens, V. Maier-Kiener
    Materials and Design, 182 (2019), ARTN 107998 (2019)
    DOI RIS ENW BIB
  • Microstructure and Mechanical Properties of Al-(12-20)Si Bi-Material Fabricated by Selective Laser Melting
    Zhang S., P. Ma, Y. Jia, Z. Yu, R. Sokkalingam, X. Shi, P. Ji, J. Eckert, K. Prashanth
    Materials, 12, ARTN 2126 (2019)
    DOI RIS ENW BIB
  • Microstructure and Failure Characteristics of Nanostructured Molybdenum-Cooper Composites
    Schwarz K., J. Rosalie, S. Wurster, R. Pippan, A. Hohenwarter
    Advanced Engineering Materials, 2019, ARTN 1900474 (2019)
    DOI RIS ENW BIB
  • Investigation of high cyclic fatigue behaviour of thin copper films using MEMS structure
    Saghaeian F., M. Lederer, A. Hofer, J. Todt, J. Keckes, G. Khatibi
    Int. Journal of Fatique, 128, ARTN 105179 (2019)
    DOI RIS ENW BIB
  • Stability of the B2 CuZr phase in Cu-Zr-Al-Sc bulk metallic glass matrix composites
    Escher B., I. Kaban, U. Kuehn, J. Eckert, S. Pauly
    J. Alloy. Compd., 790, 657-665 (2019)
    DOI RIS ENW BIB
  • High-Pressure Torsion Deformation Induced Phase Transformations and Formations: New Material Combinations and Advanced Properties
    Bachmaier A., R. Pippan
    Materials Transactions, No.7, 1256-1269 (2019)
    DOI RIS ENW BIB
  • The preparation of surfactant-free highly dispersed ethylene glycol-based aluminum nitride-carbon nanofluids for heat transfer application
    Esmaeili E., S. Rounaghi, W. Gruner, J. Eckert
    Advanced Powder Technology, 30/2019, 2032-2041 (2019)
    DOI RIS ENW BIB
  • Friction welding of electron beam melted Ti-6Al-4V
    Qin P.T., R. Damodaram, T. Maity, W.W. Zhang, C. Yang, Z. Wang, K.G. Prashanth
    Materials Science & Engineering A, 761, ARTN 138045 (2019)
    DOI RIS ENW BIB
  • In situ analysis of the effect of high heating rates and initial microstructure on the formation and homogeneity of austenite
    Eggbauer A., M. Lukas, G. Ressel, P. Prevedel, F. Mendez-Martin, J. Keckes, A. Stark, R. Ebner
    J. Mater. Sci., 54, 9197-9212 (2019)
    DOI RIS ENW BIB
  • Investigation of Zr55Cu30Al10Ni5 bulk amorphous alloy crystallization
    Sergiienko R., O. Shcheretskyi, V. Zadorozhnyy, A. Verkhovliuk, D. Louzguine-Luzgin
    J. Alloy. Compd., 791, 477-482 (2019)
    DOI RIS ENW BIB
  • Micromechanical and microstructural properties of tungsten fibers in the as-produced and annealed state: Assessment of the potassium doping effect
    Terentyev D., L. Tanure, A. Bakaeva, A. Dubinko, V. Nikolic, J. Riesch, K. Verbeken, S. Lebediev, E.E. Zhurkin
    Int. J. Refract. Met. Hard Mat., 81, 253-271 (2019)
    DOI RIS ENW BIB
  • Characterization of the chips generated by the nanomachining of germanium for X-ray crystal optics
    Zaprazny Z., D. Korytar, M. Jergel, Y. Halahovets, M. Kotlar, I. Matko, J. Hagara, P. Siffalovic, J. Keckes, E. Majkova
    Int. J. Adv. Manuf. Technol., 102, 2757-2767 (2019)
    DOI RIS ENW BIB
  • Measurement of local strain
    Gammer C., M.I. Richard, C. Eberl
    MRS Bulletin, Vol. 44/ Issue 6, 459-464 (2019)
    DOI RIS ENW BIB
  • Saturation of Grain Refinement during Severe Plastic Deformation of Single Phase Materials: Reconsiderations, Current Status and Open Questions
    Renk O., R. Pippan
    Mater. Trans., 60, 1270-1282 (2019)
    DOI RIS ENW BIB
  • The preparation of surfactant-free highly dispersed ethylene glycol-based aluminum nitride-carbon nanofluids for heat transfer application
    Esmaeili E., S. Rounaghi, W. Gruner, J. Eckert
    Adv. Powder Technol., 30, 2032-2041 (2019)
    DOI RIS ENW BIB
  • Direct measurement of nanostructural change during in situ deformation of a bulk metallic glass
    Pekin T., J. Ding, C. Gammer, B. Ozdol, C. Ophus, M. Asta, R.O. Ritchie, A. Minor
    Naturenature communications, 2019 (10), 2445 (2019)
    DOI RIS ENW BIB
  • Exceptional fracture resistance of ultrathin metallic glass films due to an intrinsic size effect
    Glushko O., M. Muehlbacher, C. Gammer, M.J. Cordill, C. Mitterer, J. Eckert
    Scientic Reports, 9, ARTN 8281 (2019)
    DOI RIS ENW BIB
  • An investigation on diffusivity while achieving a cylindrical aluminide coating on metals using simultaneous spark plasma sintering of powers
    Chawake N., P. Ghosh, J. Eckert, R.S. Kottada
    Scripta Materialia, 170(2019), 156-160 (2019)
    DOI RIS ENW BIB
  • Crack deflecting microstructure for improved electro-mechanical lifetimes of flexible systems
    Cordill M.J., T. Joerg, O. Glushko, R. Franz, C. Mitterer
    Mater. Lett., 244, 47-49 (2019)
    DOI RIS ENW BIB
  • Effect of TiB2 particles on microstructure and crystallographic texture of Al-12Si fabricated by selective laser melting
    Xi L., P. Wang, K.G. Prashanth, H. Li, Prykhodko H., S. Scudino, I. Kaban
    J. Alloy. Compd., 786, 551-556 (2019)
    DOI RIS ENW BIB
  • A study on the micro-evolution of mechanical property and microstructures in (Cu-30Fe)-2X alloys with the addition of minor alloying elements
    Jeong Y., H. Jo, J.T. Kim, S.H. Hong, K. Kim
    J. Alloy. Compd., 786, 341-345 (2019)
    DOI RIS ENW BIB
  • Fracture properties of ultrafine grain chromium correlated to single dislocation processes at room temperature
    Issa I., A. Hohenwarter, R. Fritz, D. Kiener
    Journal of Materials Research, 2019, 2370-2383 (2019)
    DOI RIS ENW BIB
  • A comparative study of glass-forming ability, crystallization kinetics and mechanical properties of Zr55Co25Al20 and Zr52Co25Al23 bulk metallic glasses
    Dong Q., Y.J. Pan, J. Tan, X.M. Qin, C.J. Li, P. Gao, Z.X. Feng, M. Calin, J. Eckert
    J. Alloy. Compd., 785, 422-428 (2019)
    DOI RIS ENW BIB
  • Correlating structural and mechanical properties of AlN/TiN superlattice films
    Koutna N., P. Kehak, Z. Chen, M. Bartosik, M. Fallmann, M. Cerny, Z. Zhang, M. Friak, M. Sob, P.H. Mayrhofer, D. Holec
    Scr. Mater., 165, 159-163 (2019)
    DOI RIS ENW BIB
  • Investigation on the Relationship Between Transition Energy and the Color Change of Cu-M Alloys
    Jeong Y., S. Hong, J.T. Kim, H. Park, Y.S. Kim, H.D. Lee, J.K. Lee, S. Mun, Y. Hwang, K. Heo, K. Kim
    Met. Mater.-Int., 25, 539-545 (2019)
    DOI RIS ENW BIB
  • Influence of annealing on microstructure and mechanical properties of ultrafine-grained Ti45Nb
    Völker B., V. Maier-Kiener, K. Werbach, T. Müller, S. Pilz, M. Calin, J. Eckert, A. Hohenwarter
    Materials and Design, 179 (2019), ARTN 107864 (2019)
    DOI RIS ENW BIB
  • New approaches in lowering the gas-phase synthesis temperature of TiO2 nanoparticles by H2O-assisted atmospheric pressure CVS process
    Rahiminezhad-Soltani M., K. Saberyan, A. Simchi, C. Gammer
    J. Mater. Res. Technol-JMRT, 8, 3024-3035 (2019)
    DOI RIS ENW BIB
  • Hydrogen-enhanced decohesion mechanism of the special E5(0 1 2) [1 0 0] grain boundary in Ni with Mo and C solutes
    He S., W. Ecker, R. Pippan, V.I. Razumovskiy
    Computational Materials ScienceScience Direct, 167, 100-110 (2019)
    DOI RIS ENW BIB
  • Electron Irradiation Effects on Strength and Ductility of Polymer Foils Studied by Femtosecond Laser-Processed Micro-Tensile Specimens
    Pfeifenberger M., G. Milassin, A. Hohenwarter, B. Putz, C.O.A. Semprimoschnig, R. Pippan
    Materials, 12, ARTN 1468 (2019)
    DOI RIS ENW BIB
  • Annealing-assisted high-pressure torsion in Zr(55)Cu(30)Al(10)Ni(5 )metallic glass
    Sarac B., F. Spieckermann, A. Rezvan, C. Gammer, L. Kraemer, J.T. Kim, J. Keckes, R. Pippan, J. Eckert
    J. Alloy. Compd., 784, 1323-1333 (2019)
    DOI RIS ENW BIB
  • Dissimilar welding of Al0.1CoCrFeNi high-entropy alloy and AISI304 stainless steel
    Sokkalingam R., V. Muthupandi, K. Sivaprasad, K. Prashanth
    Journal of Materials Research, 34, 2683-2694 (2019)
    DOI RIS ENW BIB
  • Initiation and stagnation of room temperature grain coarsening in cyclically strained gold films
    Glushko O., G. Dehm
    Acta Mater., 169, 99-108 (2019)
    DOI RIS ENW BIB
  • Structure-Property Relationships in Shape Memory Metallic Glass Composites
    Sopu D., X. Yuan, F. Moitzi, M. Stoica, J. Eckert
    Materials, 12, ARTN 1419 (2019)
    DOI RIS ENW BIB
  • Mechanochemical synthesis and hydrogenation behavior of (TiFe)100-xNix alloys
    Zadorozhnyy V., E. Berdonosova, C. Gammer, J. Eckert, M. Zadorozhnyy, A. Bazlov, M. Zheleznyi, S. Kaloshkin, S. Klyamkin
    Journal of Alloys and CompoundsElsevierScienceDirect, 796, 42-46 (2019)
    DOI RIS ENW BIB
  • Bioceramic scaffolds by additive manufacturing for controlled delivery of the antibiotic vancomycin
    Kamboj N., M. Rodríguez, R. Rahmani, K.G. Prashanth, I. Hassainova
    Proceedings of the Estonian Academy of Sciences, 68, 185-190 (2019)
    DOI RIS ENW BIB
  • In-Situ Synchotron Profile Analysis after High-Pressure Torsion Deformation
    Kerber M., F. Spieckermann, R. Schuster, B. Joni, N. Schell, E. Schafler
    crystalsMDPI, 9, 232 (2019)
    DOI RIS ENW BIB
  • Tuning the glass forming ability and mechanical properties of Ti-based bulk metallic glasses by Ga additions
    Bera S., P. Ramasamy, D. Sopu, B. Sarac, Zalesak J., C. Gammer, M. Stoica, M. Calin, J. Eckert
    Journal of Alloys and CompoundsElsevierScience Direct, 793, 552-563 (2019)
    DOI RIS ENW BIB
  • Surface structuring by Electron Beam for improved soft tissues adhesion and reduced bacterial contamination on Ti-grade 2
    Ferraris S., F. Warchomicka, C. Ramskogler, M. Tortello, A. Cochis, A. Scalia, G.G. di Confiengo, J. Keckes, L. Rimondini, S. Spriano
    J. Mater. Process. Technol., 266, 518-529 (2019)
    DOI RIS ENW BIB
  • Gradients of microstructure, stresses and mechanical properties in a multi-layered diamond thin film revealed by correlative cross-sectional nano-analytics
    Gruber D.P., J. Todt, N. Woehrl, J. Zalesak, M. Tkadletz, A. Kubec, S. Niese, M. Burghammer, M. Rosenthal, H. Sternschulte, M.J. Pfeifenberger, B. Sartory, J. Keckes
    Carbon, 144, 666-674 (2019)
    DOI RIS ENW BIB
  • Deformation behavior of designed dual-phase CuZr metallic glasses
    Peng C.X., D. Sopu, Y. Cheng, K.K. Song, S.H. Wang, J. Eckert, L. Wang
    Mater. Des., 168, ARTN 107662 (2019)
    DOI RIS ENW BIB
  • Crystallographic orientation dependent maximum layer thickness of cubic AlN in CrN/AlN multilayers
    Chen Z., D. Holec, M. Bartosik, P.H. Mayrhofer, Z. Zhang
    Acta Mater., 168, 190-202 (2019)
    DOI RIS ENW BIB
  • Toughness enhancement in TiN/WN superlattice thin films
    Buchinger J., N. Koutna, Z. Chen, Z. Zhang, P. Mayrhofer, D. Holec, M. Bartosik
    Acta Mater., 172, 18-29 (2019)
    DOI RIS ENW BIB
  • The Route to Supercurrent Transparent Ferromagnetic Barriers in Superconducting Matrix
    Ivanov Y., S. Soltan, J. Albrecht, E. Goering, G. Schuetz, Z. Zhang, A. Chuvilin
    ACS Nano 2019, 13, 5655-5661 (2019)
    DOI RIS ENW BIB
  • Ultrahigh hydrogen-sorbing palladium metallic-glass nanostructures
    Sarac B., Y. Ivanov, T. Karazehir, M. Mühlbacher, B. Kaynak, A. Greer, A. Sarac, J. Eckert
    Materials Horizons, Communication, 1481-1487 (2019)
    DOI RIS ENW BIB
  • Biomimetic hard and tough nanoceramic Ti-Al-N film with self-assembled six-level hierarchy
    Meindlhumer M., J. Zalesak, R. Pitonak, J. Todt, B. Sartory, M. Burghummer, A. Stark, N. Schell, D. Rostislav, J.F. Keckes, M. Lessiak, A. Köpf, R. Weißenbacher, J. Keckes
    Nanoscale, 2019,11, 7986-7995 (2019)
    DOI RIS ENW BIB
  • Mechanism of high-pressure torsion-induced shear banding and lamellar thickness saturation in Co-Cr-Fe-Ni-Nb high-entropy composites
    Maity T., K. Prashanth, A. Janda, J. Kim, F. Spieckermann, J. Eckert
    Journal of Materials Research, 34, 2672-2682 (2019)
    DOI RIS ENW BIB
  • Work hardening in selective laser melted Al-12Si alloy
    Gokuldoss P.
    Material Design Processing Comm, 1, 2019;e46 (2019)
    DOI RIS ENW BIB
  • Influence of directional microstructure on mechanical properties in Al-based ultrafine bimodal lamellar structured alloy
    Kim J.T., S.H. Hong, J. Eckert, K.B. Kim
    Mat Design Process Comm., 1, e52 (2019)
    DOI RIS ENW BIB
  • Encapsulation of a gradient Al2O3 layer on hierarchical structured substrate via two-step hybrid processes
    Park H., J. Lee, Y. Kim, S. Mun, T. Choi, E. Jumaev, S. Hong, J. Kim, J. Park, K. Kim
    Mater. Des., 167, ARTN 107616 (2019)
    DOI RIS ENW BIB
  • Controlling the distribution of structural heterogeneities in severely deformed metallic glass
    Bian X.L., D. Zhao, J.T. Kim, D. Sopu, G. Wang, R. Pippan, J. Eckert
    Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 752, 36-42 (2019)
    DOI RIS ENW BIB
  • Atomic structure evolution of high entropy metallic glass microwires at cryogenic temperature
    Yin H., Y. Huang, D. Daisenberg, P. Xue, S. Jiang, W. Ru, S. Jiang, Y. Bao, X. Bian, X. Tong, H. Shen, J. Sun
    Scr. Mater., 163, 29-33 (2019)
    DOI RIS ENW BIB
  • Lignin-based multiwall carbon nanotubes
    Gindl-Altmutter W., J. Köhnke, C. Unterweger, N. Gierlinger, J. Keckes, J. Zalesak, O. Rojas
    Composites Part A, 121, 175-179 (2019)
    DOI RIS ENW BIB
  • Chemical evolution-induced strengthening on AlCoCrNi dual-phase high-entropy alloy with high specific strength
    Jumaev E., S.H. Hong, J.T. Kim, H.J. Park, Y.S. Kim, S.Cl Mun, J.Y. Park, G. Song, J.K. Lee, B.H. Min, T. Lee, K.B. Kim
    J. Alloy. Compd., 777, 828-834 (2019)
    DOI RIS ENW BIB
  • Rate limiting deformation mechanisms of bcc metals in confined volumes
    Kiener D., R. Fritz, M. Alfreider, A. Leitner, R. Pippan, V. Maier-Kiener
    Acta Mater., 166, 687-701 (2019)
    DOI RIS ENW BIB
  • Garnet-Polymer Composite Electrolytes: New Insights on Local Li-Ion Dynamics and Electrodeposition Stability with Li Metal Anodes
    Zagorski J., J. Miguel Lopez del Amo, M.J. Cordill, F. Aguesse, L. Buannic, A. Llordes
    ACS APPLIED ENERGY MATERIALS, 2, 1734-1746 (2019)
    DOI RIS ENW BIB
  • Fast and direct determination of fragility in metallic glasses using chip calorimetry
    Spieckermann F., I. Steffny, X. Bian, S. Ketov, M. Stoica, J. Eckert
    HELIYON, 5, ARTN e01334 (2019)
    DOI RIS ENW BIB
  • Novel electrical transport properties of native Fe-Nb oxide layers leading to unilateral conductivity of a refractory metallic glass
    Trifonov A.S., A. Lubenchenko V, S. Ketov V, S. Taskaev V, D. Louzguine-Luzgin V
    HELIYON, 5, ARTN e01424 (2019)
    DOI RIS ENW BIB
  • Compressive and tensile bending of sputter deposited Al/Mo bilayers
    Kreiml P., M. Rausch, V. Terziyska, J. Winkler, C. Mitterer, M. Cordill
    Scripta Materialia, 162, 367-371 (2019)
    DOI RIS ENW BIB
  • A comparative study on the evolution of microstructure and hardness during monotonic and cyclic high pressure torsion of CoCuFeMnNi high entropy alloy
    Sonkusare R., N. Khandelwal, P. Ghosh, K. Biswas, N.P. Gurao
    J. Mater. Res., 34, 732-743 (2019)
    DOI RIS ENW BIB
  • Structure-stress relationships in nanocrystalline multilayered Al0.7Cr0.3N/Al0.9Cr0.1N coatings studied by cross-sectional X-ray nanodiffraction
    Klima S., N. Jäger, H. Hruby, C. Mitterer, J.F. Keckes, M. Burghammer, R. Daniel
    Materials and Design, 170 (2019), 107702 (2019)
    DOI RIS ENW BIB
  • Superior Wear Resitance in EBM-Processed TC4 Alloy Compared with SLM and Forged Samples
    Zhang W., P. Qin, Z. Wang, C. Yang, L. Kollo, D. Grzesiak, K.G. Prashanth
    materials, 12/5, 782 (2019)
    DOI RIS ENW BIB
  • Hydrogen storage properties of TiFe-based ternary mechanical alloys with cobalt and niobium. A thermochemical approach
    Berdonosova E.A., V.Y. Zadorozhnyy, M.Y. Zadorozhnyy, K.V. Geodakian, M.V. Zheleznyi, A.A. Tsarkov, S.D. Kaloshkin, S.N. Klyamkin
    International Journal of Hydrogen EnergyElsevierScience Direct, 44, 11233-11240 (2019)
    DOI RIS ENW BIB
  • The influence of crystallization conditions on the macromolecular structure and strength of y-polypropylene
    von Baeckmann C., H. Wilhelm, F. Spieckermann, S. Strobel, G. Polt, P. Sowinski, E. Piorkowska, A. Bismarck, M. Zehetbauer
    Thermochimica ActaElsevier, 677 (2019), 131-138 (2019)
    DOI RIS ENW BIB
  • Effect of heat treatment on microstructure and mechanical properties of 316L steel synthesized by selective laser melting
    Salman O.O., C. Gammer, A.K. Chaubey, J. Eckert, S. Scudino
    Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 748, 205-212 (2019)
    DOI RIS ENW BIB
  • Tailoring bimodal grain size structures in nanocrystalline compositionally complex alloys to improve ductility
    Schuh B., R. Pippan, A. Hohenwarter
    Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 748, 379-385 (2019)
    DOI RIS ENW BIB
  • Oxygen-mediated deformation and grain refinement in Cu-Fe nanocrystalline alloys
    Guo J., M.J. Duarte, Y. Zhang, A. Bachmaier, C. Gammer, G. Dehm, R. Pippan, Z. Zhang
    Acta Materialia, 281-293 (2019)
    DOI RIS ENW BIB
  • Estimation of diffusivity from densification data obtained during spark plasma sintering
    Chawake N., P. Ghosh, L. Raman, A.K. Srivastav, T. Paul, S.P. Harimkar, J. Eckert, R.S. Kottada
    Scr. Mater., 161, 36-39 (2019)
    DOI RIS ENW BIB
  • Design of next-generation alloys for additive manufacturing
    Gokuldoss P.
    Mat. Design Process Comm., 2019;e50, 1-4 (2019)
    DOI RIS ENW BIB
  • Retardation of Fatigue Crack Growth in Rotating Bending Specimens with Semi-Elliptical Cracks
    Leitner M., D. Simunek, J. Maierhofer, H. Gaenser, R. Pippan
    Metals, 9, ARTN 156 (2019)
    DOI RIS ENW BIB
  • Analytical and Numerical Crack Growth Analysis of 1:3 Scaled Railway Axle Specimens
    Simunek D., M. Leitner, J. Maierhofer, H.P. Gaenser, R. Pippan
    Metals, 9, ARTN 184 (2019)
    DOI RIS ENW BIB
  • Benefits of pattern formation by severe plastic deformation
    Kulagin R., Y. Beygelzimer, A. Bachmaier, R. Pippan, Y. Estrin
    Applied Materials TodayElsevierScience Direct, 236-241 (2019)
    DOI RIS ENW BIB
  • Coexistence of adjacent vacancy-ordered and eutectic phases in Al-Cu-Ni alloys
    Maity S., D.K. Chanda, P. Ramasamy, B.K. Show, J. Eckert, S. Bera
    Taylor & Francis, 98/2018, 486-493 (2019)
    DOI RIS ENW BIB
  • Polymorphic Transformation and Magnetic Properties of Rapidly Solidified Fe26.7Co26.7Ni26.7Si8.9B11.0 High-Entropy Alloys
    Zhang Z., K. Song, R. Li, Q. Xue, S. Wu, D. Yan, X. Li, B. Song, B. Sarac, J.T. Kim, P. Ramasamy, L. Wang, J. Eckert
    Materials, 12, ARTN 590 (2019)
    DOI RIS ENW BIB
  • Co-Cr-Mo-C-B metallic glasses with wide supercooled liquid region obtained by systematic adjustment of the metalloid ratio
    Kim J.T., S.H. Hong, Y.S. Kim, H.J. Park, T. Maity, N. Chawake, K.G. Prashanth, K.K. Song, W.M. Wang, J. Eckert, K.B. Kim, J.M. Park
    Journal of Non-Crystalline Solids, 310-319 (2019)
    DOI RIS ENW BIB
  • Graphene-templated synthesis of palladium nanoplates as novel electrocatalyst for direct methanol fuel cell
    Hujiang Y., L. Geng, Y. Zhang, G. Chang, Z. Zhang, X. Liu, M. Lei, Y. He
    Applied Surface Science, 385-392 (2019)
    DOI RIS ENW BIB
  • Direct atomic identification of cation migration induced gradual cubic-to-hexagonal phase transition in Ge2Sb2Te5
    Zheng Y., Y. Wang, T. Xin, Y. Cheng, R. Huang, P. Liu, M. Luo, Z. Zhang, S. Lv, Z. Song, S. Feng
    COMMUNICATIONS CHEMISTRY, 2, ARTN 13 (2019)
    DOI RIS ENW BIB
  • Influence of Processing Parameters on the Mechanical Properties of HPT-deformed Nickel/ Carbon Nanotube composites
    Katzensteiner A., T. Müller, K. Kormout, K. Aristizabel, S. Suarez, R. Pippan, A. Bachmaier
    Advanced Engineering Materials, 21(1), ARTN 1800422 (2019)
    DOI RIS ENW BIB
  • Study of Cu0 Nanowire Growth on Different Copper Surfaces
    Popovski F., S. Ludwikowska, F. Köck, J. Keckes, G. Maier
    Scientific Reports, 9, ARTN 37172-8 (2019)
    DOI RIS ENW BIB
  • Characterization of strain bursts in high density polyethylene by means of a novel nano creep test
    Wilhelm H., F. Spieckermann, C. Fischer, G. Polt, M. Zehetbauer
    International Journal of Plasticity, 116, 297-313 (2019)
    DOI RIS ENW BIB
  • Optimizing mechanical properties of Fe26.7Co26.7Ni26.7Si8.9B11 high entropy alloy by inducing hypoeutectic to quasi-duplex microstructural transition
    Zhang Z.Q., K.K. Song, S. Guo, Q.S. Xue, H. Xing, C.D. Cao, F.P. Dai, B. Voelker, A. Hohenwarter, T. Maity, N. Chawake, J.T. Kim, L. Wang, I. Kaban, J. Eckert
    Sci Rep, 9, ARTN 360 (2019)
    DOI RIS ENW BIB
  • Bioinspired nacre-like alumina with a bulk-metallic glass-forming alloy as a compliant phase
    Wat A., J. In Lee, C.W. Ryu, B. Gludovatz, J. Kim, A.P. Tomsia, T. Ishikawa, J. Schmitz, A. Meyer, M. Alfreider, D. Kiener, E.S. Park, R.O. Ritchie
    nature communications, 10, 961 (2019)
    DOIWebseite RIS ENW BIB
  • Electromechanical properties of cathodic arc deposited high entropy alloy thin films on polymer substrates
    Xia A., O. Glushko, M.J. Cordill, R. Franz
    J. Vac. Sci. Technol. A, 37, ARTN 010601 (2019)
    DOI RIS ENW BIB
  • Localized pore evolution assisted densification during spark plasma sintering of nanocrystalline W-5wt.%Mo alloy
    Srivastav A.K., N. Chawake, D. Yadav, N.S. Karthiselva, B.S. Murty
    Scr. Mater., 159, 41-45 (2019)
    DOI RIS ENW BIB
  • Influence of cyclic loading on the structure and double-stage structure relaxation behavior of a Zr-Cu-Fe-Al metallic glass
    Louzguine-Luzgin D.V., M.Y. Zadorozhnyy, S.V. Ketov, J. Jiang, I.S. Golovin, A.S. Aronin
    Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 742, 526-531 (2019)
    DOI RIS ENW BIB
  • Nanostructured Metallic Materials and Composites: Processes, Properties and Microstructures
    Bachmaier A., A. Hohenwarter, H.W. Hoeppel, J. Ivanisenko
    Adv. Eng. Mater., 21, ARTN 1801073 (2019)
    DOI RIS ENW BIB
  • Magnetic Binary Supersaturated Solid Solutions Processed by Severe Plastic Deformation
    Stueckler M., H. Krenn, R. Pippan, L. Weissitsch, S. Wurster, A. Bachmaier
    Nanomaterials, 9, ARTN 6 (2019)
    DOI RIS ENW BIB
  • High strength nanocrystalline Cu-Co alloys with high tensile ductility
    Bachmaier A., G.B. Rathmayr, J. Schmauch, N. Schell, A. Stark, N. De Jonge, R. Pippan
    Materials Research, 34 (1), 58-68 (2019)
    DOI RIS ENW BIB
  • Anisotropy of fracture toughness in nanostructured ceramics controlled by grain boundary design
    Rostislav D., M. Meindlhumer, W. Baumegger, J. Todt, J. Zalesak, T. Ziegelwanger, C. Mitterer, J. Keckes
    Materials and Design, 80-85 (2019)
    DOI RIS ENW BIB
  • Evolution of structure and residual stress of a fcc/hex-A1CrN multi-layered system upon thermal loading revealed by cross-sectional Xray nano-diffraction
    Jaeger N., S. Klima, H. Hruby, J. Julin, M. Burghammer, J.F. Keckes, C. Mitterer, R. Daniel
    Acta Mater., 162, 55-66 (2019)
    DOI RIS ENW BIB

Master Thesis

Master Thesis

  • Nanoidentation response of single crystal copperfilms on sapphire
    Sträußnigg J.
    (2019)
    RIS ENW BIB
  • Effects of alloying and fluxing treatment on thermal, magnetic and structural properties of Fe-(Ni, Co)-P-C metallic glass ribbons
    Yüce E.
    (2019)
    RIS ENW BIB
  • Comparative study on the miscibility of Cu-Fe-Co compounds processed by methods of severe deformation
    Kasalo M.
    (2019)
    RIS ENW BIB
  • Deformation Mechanisms in Metallic Glasses: An Atomistic Study
    Moitzi F.
    (2019)
    RIS ENW BIB
  • The role of adhesion layers on the interfacial reliability of multilayer insulators
    Paulitsch M.
    (2019)
    RIS ENW BIB
  • Mechanical, Physical and Structural Investigation of Severe Plastically Deformed CuZr-Based Metallic Glasses
    Rezvan A.
    (2019)
    RIS ENW BIB

Other

Other

Zurück
share

Erich Schmid Institute of Materials Science
of the Austrian Academy of Sciences

Jahnstrasse 12
8700 Leoben
Austria
UID: ATU37116303

 

Secretary Austrian Academy of Sciences:

Phone: +43 3842 804 111
e-mail: daniela.brunner(at)oeaw.ac.at

Secretary University Leoben:

Phone: +43 3842 804 112
e-mail: sabine.wilfling(at)unileoben.ac.at

© Copyright OEAW Impressum Datenschutz Barrierefreiheit
Hinweis zu Cookies

Diese Website verwendet Cookies. Sie gewährleisten wesentliche Funktionalitäten der Website und ermöglichen uns, Inhalte laufend zu optimieren. Helfen Sie uns dabei, indem Sie der Erhebung statistischer Daten und der Darstellung externer multimedialer Inhalte zustimmen. Die Zustimmung ist jederzeit widerrufbar. Weitere Informationen finden Sie in den Cookie-Einstellungen sowie in der Datenschutzerklärung.

Notwendig

Diese Cookies werden für eine reibungslose Funktion unserer Website benötigt.

NameZweckSpeicherdauerTypAnbieter
CookieConsent Speichert Ihre Einwilligung zur Verwendung von Cookies. 1 Jahr HTML Web Consent
fe_typo_user Ordnet Ihren Browser einer Session auf dem Server zu. Dies beeinflusst nur die Inhalte, die Sie sehen und wird von uns nicht ausgewertet oder weiterverarbeitet. - HTTP Web User
Statistik

Mit Hilfe dieser Cookies sind wir bemüht, unser Angebot für Sie noch attraktiver zu gestalten. Mittels pseudonymisierter Daten von Websitenutzer:innen kann die Benutzung analysiert und interpretiert werden. Dies gibt uns die Möglichkeit, Websiteinhalte zu optimieren.

NameZweckSpeicherdauerTypAnbieter
_pk_id Wird verwendet, um ein paar Details über den Benutzer wie die eindeutige Besucher-ID zu speichern. 13 Monate HTML Matomo-id
_pk_ref Wird benutzt, um die Informationen der Herkunftswebsite des Benutzers zu speichern. 6 Monate HTML Matomo-ref
_pk_ses Kurzzeitiges Cookie, um vorübergehende Daten des Besuchs zu speichern. 30 Minuten HTML Matomo-ses
_pk_cvar Kurzzeitiges Cookie, um vorübergehende Daten des Besuchs zu speichern. 30 Minuten HTML Matomo-cvar
_pk_hsr Kurzzeitiges Cookie, um vorübergehende Daten des Besuchs zu speichern. 30 Minuten HTML Matomo
Multimedia

Mit Hilfe dieser Cookies bemühen wir uns, unser Informations-Angebot für unsere Nutzer:innen durch die Bereitstellung beispielsweise von Videoinhalten zu verbessern.

NameZweckSpeicherdauerTypAnbieter
YouTube Es wird eine Verbindung mit YouTube hergestellt, um Videos anzuzeigen. - Verbindung YouTube
SoundCloud Es wird eine Verbindung mit SoundCloud hergestellt, um Audio-Dateien abzuspielen. - Verbindung SoundCloud
Twitter Es wird eine Verbindung mit Twitter hergestellt, um Tweets anzuzeigen. - missing translation: type. Twitter