Proceedings of the enviBUILD 2019 : : Buildings and Environment / / Hraška Jozef.

• Author: Jozef, Hraška
• HerausgeberIn: Jozef, Hraška,
• Place / Publishing House: Warsaw ;, Berlin : : Sciendo,, [2020]; ©2020
• Year of Publication: 2020
• Language: English
• Physical Description: 1 online resource

The enviBUILD conferences are organized annually by one of the Central European universities. They are building on the legacy of the Buildings and Environment Conferences held by the Faculty of Civil Engineering of the Slovak Technical University. Since 2012 they have been carried out under the “enviBUILD” brand name. An overview of all previous conferences can be found at “www.cab.sk/pastevents.html”. The enviBUILD conferences seek to map the current situation in the field of sustainable construction in the Central European region. The fourteenth sequel organized 2019 in Bratislava, as a one-day event, focused on building physics and applied technology in architecture, building construction and environmental engineering, with the following themes and topics: Indoor Environment and its Hygienic Aspects Sustainable Buildings and Environmental Assessment Building Materials and Components Energy Performance of Buildings Hygrothermal Performance of Buildings Responsive and Adaptive Building Envelopes Ventilation of Buildings Daylighting Building Acoustic Energy and Indoor Environmental Simulation Of the seventy abstracts submitted, some fifty valuable scientific articles were produced, most of which were presented directly at the conference. The contributions came from eight countries and more than a dozen academic institutions. All published papers were peer-reviewed by at least two independent professionals. In this way they provide a relatively comprehensive overview of the research and development in the field of sustainable construction, especially in Slovakia and the Czech Republic, enriched with inspirations from Austria, France, Hungary and Ukraine.

Table of Contents

Frontmatter -- AGRO-BUILDING CLUSTERS FOR SOLUTION CRITICAL CHALLENGES OF SUSTAINABLE DEVELOPMENT -- NUMERICAL THERMAL ANALYSIS OF WALL STRUCTURE FOR SUSTAINABLE BUILDINGS -- INFLUENCE OF ELECTROSTATIC CHARGE ON AIR-CONDITIONING FILTERS FROM NANOFIBROUS STRUCTURES -- CFD SIMULATION, CHANGE OF WIND VELOCITY THROUGH NETTING AS PERFORATED BARRIER -- OPTIMIZATION OF BIOCOMPOSITE MATERIALS FOR OUTER SHELL OF BUILDINGS -- EVALUATION OF THERMAL COMFORT IN MODERN SMALL UNIVERSITY LECTURE HALL IN RELATION TO AIR CONDITIONING SYSTEM -- SOLAR IRRADIANCE AVAILABILITY BASED ON BRATISLAVA MEASUREMENTS -- THE REFURBISHMENT OF TOP LIGHTING AND ITS IMPACT ON THE VISUAL ENVIRONMENT IN THE INDUSTRIAL HALL : A CASE STUDY -- The parameters evaluation of the indoor environment of the office building -- PREVENTION OF OVERHEATING RISK: ASSESSMENT OF A BUILDING PROJECT WITH LIGHTWEIGHT CONSTRUCTION IN AUSTRIA -- PERFORMANCE-BASED RETROFIT CONSIDERATIONS FOR PREFABRICATED BUILDINGS: A CASE STUDY OF ZAGREB, CROATIA -- EXTERNAL PRESSURES DISTRIBUTION ON TENSIONED MEMBRANE ROOFS -- TESTING OF THE SOLAR HEAT GAIN COEFFICIENT OF FENESTRATION PRODUCT -- OBTAINING THE SHORT-WAVE RADIATION ABSORPTIVITY BASED ON THE SURFACE TEMPERATURE MEASUREMENT AND HAM SIMULATION -- ANALYSIS OF HYGROTHERMAL PERFORMANCE OF SELECTED LIGHT-WEIGHT WOODEN ENVELOPE -- REGIONAL AND LOCAL IDENTITY IN BUILT ENVIRONMENT AND MATERIAL CULTURE AS IMPORTANT PART OF SOCIAL AND CULTURAL SUSTAINABILITY AND WELLBEING -- NUMERICAL AND MEASUREMENT INVESTIGATION OF THE THERMAL BRIDGE CAUSED BY THE PIPE PASSING THROUGH THE INSULATED WALL -- SIMPLIFIED ANALYTICAL MODEL FOR THE INVESTIGATION OF THE TRANSIENT THERMAL BEHAVIOR OF THE HEATING RADIANT SLAB -- THE ENVIRONMENTAL ASPECT OF ETICS REGULAR MAINTENANCE -- LIFE-CYCLE AND HYGROTHERMAL BASED OPTIMIZATION OF INSULATION FILLED MASONRY BLOCKS -- DESIGN ASSESSMENT OF PITCHED ROOFS WITH HEAVY STRUCTURE USING THE CTF METHOD -- STUDY OF SUMMER OVERHEATING ON THE NEW MASONRY SELF-INSULATING BLOCK -- FLAMMABLE REFRIGERANTS IN BUILDINGS FROM FIRE SAFETY POINT OF VIEW -- DEVELOPMENT OF 3D PRINTING TECHNOLOGY: MATERIALS, STRUCTURAL ELEMENTS, EQUIPMENT -- QUANTITATIVE DESIGN METHODS OF CORROSION PROTECTION THE REINFORCED CONCRETE STRUCTURES AT THE STAGES OF THE LIFE CYCLE -- THE QUALITY OF DAYLIGHT IN VARIOUS TYPES OF RESIDENTIAL BUILDINGS -- EVALUATION OF ENERGY SOURCES OF AN OFFICE BUILDING - A CASE STUDY -- A REVIEW OF THE EVA – PROJECT: EVALUATION OF VISONARY ARCHITECTURAL CONCEPTS IN VIEW OF BUILDING PERFORMANCE -- PCMS IN BUILDINGS: COMPATIBILITY WITH CONTAINER MATERIALS AND ANALYSIS OF ENVIRONMENTAL IMPACTS -- IMPACT OF THE INSTALLED INLET VENTILATION UNIT IN THE WINDOW ON ITS OVERALL AERODYNAMIC AND THERMAL PROPERTIES -- EVALUATION OF THE KUNERT’S GLAZING IN SUMMER AND WINTER CLIMATIC CONDITION IN SLOVAKIA -- HYGROTHERMAL MONITORING OF A DOUBLE-SKIN VENTILATED COLD FLAT ROOF -- INTERDISCIPLINARY DISCUSSIONS ON SUSTAINABLE USE OF WOOD STRUCTURE AND FIRE RISK - SITUATIONS IN JAPAN AND AUSTRIA - -- CASE STUDY OF APPLICATION OF CAPILLARY ACTIVE THERMAL INSULATION SYSTEMS USED AS AN INTERIOR INSULATION FOR HISTORICAL BUILDINGS -- THE MODULAR SWIMMING HALL BUILDING DESIGNS BY F.F. GRÜNBERGER – AN INQUIRY INTO THE BUILDING PERFORMANCE OF VIENNA’S DISTRICT BATHS -- SIMULATION-BASED PERFORMANCE COMPARISON OF FAÇADE CONSTRUCTIONS: VACUUM GLAZING VERSUS COMMON INSULATION GLASS