Publications 2018

PhD Thesis

PhD Thesis

  • Atomic-scale characterization of severely deformed nanocrystalline alloys
    J. Guo
    (2018)
  • Advanced Nanoindentation Techniques for the Extraction of Material Flow Curves
    A. Leitner
    (2018)

Conference Papers

Conference Papers

Journal Articles

Journal Articles

  • Matching in-situ and ex-situ recorded stress gradients in an AlxGa1 − xN Heterostructure: Complementary wafer curvature analyses in time and space
    M. Reisinger, C. Ostermaier, M. Tomberger, J. Zechner, B. Sartory, W. Ecker, I. Daumiller, J. Keckes
    Scripta Materialia 147, 50-54 (2018)
  • Bulk metallic dual phase glasses by severe plastic deformation
    L. Krämer, Y. Champion, K.S. Kormout, V. Maier-Kiener, R. Pippan
    Intermetallics 94, 172-178 (2018)
  • Influence of silicon content on microstructure and mechanical properties of Ti-Cr-Si alloys
    Y.J. Hwang, S.H. Hong, Y.S. Kim, H.J. Park, Y.B. Jeong, J.T. Kim, K.B. Kim
    J. Alloy. Compd. 737, 53-57 (2018)
  • In situ nanobeam electron diffraction strain mapping of planar slip in stainless steel
    T.C. Pekin, C. Gammer, J. Ciston, C. Ophus, A.M. Minor
    Scr. Mater. 146, 87-90 (2018)
  • In situ atomic-scale observation of oxidation and decomposition processes in nanocrystalline alloys
    J. Guo, G. Haberfehlner, J. Rosalie, L. Li, M.J. Duarte, G. Kothleitner, G. Dehm, Y. He, R. Pippan, Z. Zhang
    Nat. Commun. 9, ARTN 946 (2018)
  • Two-stage cracking of metallic bi-layers on polymer substrates under tension
    B. Putz, C. May-Miller, V. Matl, B. Völker, D.M. Többens, C. Semprimoschnig, M.J. Cordill
    Scripta Materialia 145, 5-8 (2018)
  • Verification of correlation between densification during spark plasma sintering and compressive creep of ultrafine-grained in-situ Al2O3-reinforced B2 aluminide matrix composites
    N. Chawake, N.T.B.N. Koundinya, R.S. Kottada
    J. Alloy. Compd. 735, 1921-1930 (2018)
  • Exceptionally high nanoscale wear resistance of a Cu47Zr45Al8 metallic glass with native and artificially grown oxide
    D.V. Louzguine-Luzgin, M. Ito, S.V. Ketov, A.S. Trifonov, J. Jiang, C.L. Chen, K. Nakajima
    Intermetallics 93, 312-317 (2018)
  • Fabrication of Al-Zn solid solution via friction stir processing
    D. Yadav, R. Bauri, N. Chawake
    Mater. Charact. 136, 221-228 (2018)
  • On the reinforcement homogenization in CNT/metal matrix composites during severe plastic deformation
    K. Aristizabal, A. Katzensteiner, A. Bachmaier, F. Muecklich, S. Suarez
    Mater. Charact. 136, 375-381 (2018)
  • Strain Distribution Across an Individual Shear Band in Real and Simulated Metallic Glasses
    S. Scudino, D. Sopu
    Nano Letters 18, 1221-1227 (2018)
  • Local-structure change rendered by electronic localization-delocalization transition in cerium-based metallic glasses
    Q. Luo, B. Schwarz, J.C. Swarbrick, J. Bednarcik, Y. Zhu, M. Tang, L. Zheng, R. Li, J. Shen, J. Eckert
    Phys. Rev. B 97, ARTN 064104 (2018)
  • Mechanical properties of electrodeposited amorphous/crystalline multilayer structures in the Fe-P system
    T. Müller, A. Bachmaier, R. Konetschnik, T. Schöberl, R. Pippan
    Materials Science & Engineering A 715, 83-91 (2018)
  • Amorphous martensite in beta-Ti alloys
    L. Zhang, H. Zhang, X. Ren, J. Eckert, Y. Wang, Z. Zhu, T. Gemming, S. Pauly
    Nat. Commun. 9, ARTN 506 (2018)
  • Thermally-triggered Dual In-situ Self-healing Metallic Materials
    J.T. Kim, H.J. Kim, S.H. Hong, H.J. Park, Y.S. Kim, Y.J. Hwang, Y.B. Jeong, J.-Y. Park, J.M. Park, B. Sarac, W.-M. Wang, J. Eckert, K.B. Kim
    Sci Rep 8, ARTN 2120 (2018)
  • Elastostatic reversibility in thermally formed bulk metallic glasses: nanobeam diffraction fluctuation electron microscopy
    B. Sarac, C. Gammer, L. Deng, E. Park, Y. Yokoyama, M. Stoica, J. Eckert
    Nanoscale 10, 1081-1089 (2018)
  • High strength nanostructured Al-based alloys through optimized processing of rapidly quenched amorphous precursors
    S.-Y. Kim, G.-Y. Lee, G.-H. Park, H.-A. Kim, A.-Y. Lee, S. Scudino, Konda Gokuldoss P., D.-H. Kim, J. Eckert, M.-H. Lee
    Scientific Reports 8, ARTN 1090)
  • Precipitate strengthening and thermal stability in three component metallic nanolaminate thin films
    R.L. Schoeppner, A.A. Taylor, M.J. Cordill, H.M. Zbib, J. Michler, D.F. Bahr
    Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process. 712, 485-492 (2018)
  • Prediction of the mechanical behaviour of pearlitic steel based on microcompression tests, micromechanical models and homogenization approaches
    M. Ekh, N. Larijani, E. Dartfeldt, M. Kapp, R. Pippan
    Eur. J. Mech. A-Solids 67, 272-279 (2018)
  • Microstructure and mechanical properties of a heat-treatable Al-3.5Cu-1.5Mg-1Si alloy produced by selective laser melting
    P. Wang, C. Gammer, F. Brenne, K.G. Prashanth, R.G. Mendes, M.H. Ruemmeli, T. Gemming, J. Eckert, S. Scudino
    Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process. 711, 562-570 (2018)
  • Mechanical and Tribological Properties of Al2O3-TiC Composite Fabricated by Spark Plasma Sintering Process with Metallic (Ni, Nb) Binders
    R. Kumar, A.K. Chaubey, T. Maity, Konda Gokuldoss P.
    Metals 8, ARTN 50 (2018)
  • Influence of Nb on the Microstructure and Fracture Toughness of (Zr0.76Fe0.24)100−xNbx Nano-Eutectic Composites
    T. Maity, A. Dutta, P.P. Jana, P. Konda Gokuldoss, J. Eckert, J. Das
    Materials 11, ARTN 113 (2018)
  • Influence of severe plastic deformation and specimen orientation on the fatigue crack propagation behavior of a pearlitic steel
    T. Leitner, G. Trummer, R. Pippan, A. Hohenwarter
    Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process. 710, 260-270 (2018)
  • Electrically reversible cracks in an intermetallic film controlled by an electric field
    Z.Q. Liu, J.H. Liu, M.D. Biegalski, J.-M. Hu, S.L. Shang, Y. Ji, J.M. Wang, S.L. Hsu, A.T. Wong, M.J. Cordill, B. Gludovatz, C. Marker, H. Yan, Z.X. Feng, L. You, M.W. Lin, T.Z. Ward, Z.K. Liu, C.B. Jiang, L.Q. Chen, R.O. Ritchie, H.M. Christen, R. Ramesh
    Nat. Commun. 9, ARTN 41 (2018)
  • Nanoindentation creep behavior of Cu–Zr metallic glass films
    Y. Wang, J. Zhang, K. Wu, G. Liu, D. Kiener, J. Sun
    Materials Research Letters 6, 22-28 (2018)
  • Thermodynamic instability of a nanocrystalline, single-phase TiZrNbHfTa alloy and its impact on the mechanical properties
    B. Schuh, B. Voelker, J. Todt, N. Schell, L. Perriere, J. Li, J.P. Couzinie, A. Hohenwarter
    Acta Mater. 142, 201-212 (2018)

Master Thesis

Master Thesis

  • Cross-sectional properties of carburized steel
    T. Ziegelwanger
    (2018)

Other

Other