Publications 2011

PhD Thesis

PhD Thesis

  • Der Einfluss von verschiedenen Schienengüten und unterschiedlichen Kontaktbedingungen auf Verschleiß und Rollkontaktermüdung von Schienen
    R.F. Stock
    (2011)
  • Verformung und Bruch von modernen, hochfesten Multiphasenstählen
    M. Kapp
    (2011)
  • Mikrostrukturoptimierung und Struktur-Eigenschaftsbeziehungen von thermoplastischen Nanokompositen
    M. Feuchter
    (2011)
  • Ursachen und Auswirkungen von Delaminationsrissen in thermomechanisch gewalzten Stählen
    M. Sonnleitner
    (2011)
  • Uniaxiale Zuversuche von spröden Schichten auf duktile Substraten
    A. Taylor
    (2011)
  • Temperaturabhängige mechanische Eigenschaften miniaturisierter Kupferstrukturen aus der Leistungshalbleiterelektronik
    M. Smolka
    (2011)
  • Herstellung von massiven Nanoverbundwerkstoffen mittels Hochverformung
    A. Bachmaier
    (2011)
  • The Microstructural Break Down: The Effect of Initial Grain Size
    C. Rehrl
    Diplomarbeit, Montanuniversität Leoben, November 2006, None (2011)
  • Fracture Behavior of Tungsten Based Materials
    S. Wurster
    (2011)
  • Influence of Microstructure on Material Behaviour of WC-Co Hard Metals under Static and Cyclic Loading Conditions
    T. Klünsner
    , 111 (2011)
  • Plasticity at the Micron Scale: A µLaue Study
    C. Kirchlechner
    , 140 (2011)

Conference Papers

Conference Papers

  • Comparative studies of the CrN/Cr/Si and CrN/Si interfaces by Cs-corrected HRTEM and STEM-EELS
    D.R. Zhang Zaoli
    MCM2011, 29-30 (2011)
  • Advances in in-situ testing in scanning electron microscopes: probing mechanical properties at the nano/micro-scale
    K.D. Motz Christian
    MCM2011, 57-58 (2011)
  • Plasticity of FIB fabricated micro-samples investigated by in-situ micro-Laue diffraction and in-situ TEM
    K.C. Kiener Daniel
    MCM2011, 129-130 (2011)
  • Obtaining a quantitative micro- and nano-mechanical understanding of metals using in situ electron microscopy
    K.D. Dehm Gerhard
    MCM2011, 599-600 (2011)
  • Growth kinetic of Al2Cu precipitates during in-situ TEM heating in severe plastically deformed Al-3wt%Cu alloy
    F.M. Rashkova Boriana
    MCM2011, 623-624 (2011)
  • Fatigue Crack Closure from LCF to small skill yielding
    G.W. Pippan Reinhard
    YJR James M.N. Susmel L., ed., 208-215 (2011)
  • Physical metallurgy and properties of ß-solidifying TiAl based alloys
    S.T. Clemens Helmut
    Materials Research Society, ed., 95-100 (2011)

Journal Articles

Journal Articles

  • Grain resolved orientation changes and texture evolution in a thermally strained Al film on Si substrate
    D.G. Heinz Walther
    Surface and Coatings Technology, 1850-1854 (2011)
  • 40 Jahre Erich-Schmid-Institut für Materialwissenschaft der ÖAW
    P.R. Dehm Gerhard
    , 1 (2011)
  • High-Tech Schmiede: Erich-Schmid-Institut für Materialwissenschaft wird 40 Jahre
    G. Dehm
    , 1 (2011)
  • Tiefe Einblicke in die Strukturen
    K.O. Pippan Reinhard
    , 2 (2011)
  • Thickness Effects on the Fracture of Chromium Films on Polyethylene Terephthalate
    T.A. Cordill Megan Jo
    Berg- und Hüttenmännische Monatshefte (BHM), 434-437 (2011)
  • Ab initio molecular dynamics model for density, elastic properties and short range order of Co–Fe–Ta–B metallic glass thin films
    M.D. Hostert C.
    Journal of Physics: Condensed Matter, 475401-475408 (2011)
  • Mit der Technik der Tausendfüßler
    D. Kiener
    , 34-35 (2011)
  • Bioinspired Design Criteria for Damage-Resistant Materials with Periodically Varying Microstructure
    P.J. Kolednik Otmar
    Advanced Functional Materials 21, 3634-3641 (2011)
  • Enhancement of strength and stability of nanostructured Ni by small amounts of solutes
    L.K. Zhang H.W.
    Scripta Materialia, 481-484 (2011)
  • Electrical properties of ZnO nanorods studied by conductive atomic force mircoscopy
    K.M. Beinik I.
    Journal of Applied Physics, 052005-1-7 (2011)
  • Atomic and electronic structures of a transition layer at the CrN/Cr interface
    D.R. Zhang Zaoli
    Journal of Applied Physics, 043524-1-4 (2011)
  • Influence of impurities and deformation temperature on the saturation microstructure and ductility of HPT-deformed nickel
    P.R. Rathmayr Georg
    Acta Materialia, 7228-7240 (2011)
  • The effect of temperature and strain rate on the periodic cracking of amorphous AlxOy films on Cu
    E.V. Taylor Aidan
    Surface & Coatings Technology, 1855-1859 (2011)
  • Interface failure and adhesion measured by focused ion beam cutting of metal–polymer interfaces
    S.K. Cordill Megan Jo
    Philosophical Magazine Letters, 530-536 (2011)
  • Probing the Strain Hardening Response of Small Wear Volumes with Nanoindentation
    M.N.R. Cordill Megan Jo
    Metallurgical and Materials Transactions A, 2226-2232 (2011)
  • In Situ High Temperature X-Ray Diffraction Reveals Residual Stress Depth-Profiles in Blasted TiN Hard Coatings
    P.R. Bartosik Matthias
    Advanced Engineering Materials, 705-711 (2011)
  • Size effect of thermal expansion and thermal/intrinsic stresses in nanostructured thin films: Experiment and model
    H.D. Daniel R.
    Acta Materialia, 6631-6645 (2011)
  • The effect of film thickness variations in periodic cracking: Analysis and experiments
    E.V. Taylor Aidan
    Surface & Coatings Technology, 1830-1836 (2011)
  • Influence of impurities on the fracture behavior of tungsten
    W.S. Gludovatz Bernd
    Philosophical Magazine, 3006-3020 (2011)
  • In situ nanocompression testing of irradiated copper
    D. Kiener, P. Hosemann, S.A. Maloy, A.M. Minor
    Nature Materials 10, 608-613 (2011)
  • In Situ µLaue: Instrumental Setup for the Deformation of Micron Sized Samples
    K.J. Kirchlechner Christoph
    Advanced Engineering Materials, 837-844 (2011)
  • Kiener Daniel "In situ nanocompression testing of irradiated copper" in Nature Materials
    D. Kiener
    , 1 (2011)
  • Source Truncation and Exhaustion: Insights from Quantitative in situ TEM Tensile Testing
    M.A.M. Kiener Daniel
    Nano Letters, 3816-3820 (2011)
  • Decomposition pathways in age hardening of Ti-Al-N films
    M.S. Rachbauer R.
    Journal of Applied Physics, 023515-1-023515-10 (2011)
  • The Power of Nuclear: Testing Irradiated Materials on the Nanoscale
    D. Kiener
    , 1 (2011)
  • Effects of thermal annealing on the microstructure of sputtered Al2O3 coatings
    H.T.P. Edlmayr V.
    Journal of Vacuum Science Technology A, 041506-1-8 (2011)
  • Cellulose nanofibrils as filler for adhesives: effect on specific fracture energy of solid wood-adhesive bonds
    M.U. Veigel Stefan
    Cellulose, 1227-1237 (2011)
  • Wie sich Kupfer unter Bestrahlung verformt
    D. Kiener
    , 1 (2011)
  • Effect of oxide particles on the stabilization and final microstructure in aluminium
    P.R. Bachmaier Andrea
    Materials Science and Engineering A, 7589-7595 (2011)
  • Leobener Forscher verbessert Prüfung von Reaktorwerkstoffen
    D. Kiener
    , 2 (2011)
  • Leobener Forscher verbessert Prüfung von Reaktorwerkstoffen
    D. Kiener
    , 1 (2011)
  • Impact of instrumental constraints and imperfections on the dislocation structure in micron-sized Cu compression pillars
    K.J. Kirchlechner Christoph
    Acta Materialia, 5618-5626 (2011)
  • Significance of temperature increase in processing by high-pressure torsion
    M.R. Edalati Kaveh
    Materials Science and Engineering A, 7301-7305 (2011)
  • A micro-level strain analysis of a high-strength dual-phase steel
    H.T. Kapp Marianne
    International Journal of Materials Research (formerly Z. Metallkd.), 687-691 (2011)
  • Microstructure and adhesion of as-deposited and annealed Cu/Ti films on polyimide
    T.A. Cordill Megan Jo
    International Journal of Materials Research (formerly Z. Metallkd.), 729-734 (2011)
  • Microstructure evolution and mechanical properties of an intermetallic Ti-43.5Al-4Nb-1Mo-0.1B alloy after ageing below the eutectoid temperature
    C.H. Cha Limei
    International Journal of Materials Research (formerly Z. Metallkd.), 703-708 (2011)
  • Time-dependent contact behavior between diamond and a CNT turf
    F.S.P. Qiu A.
    Nanotechnology, 295702 (7pp) (2011)
  • Dislocation plasticity of Al film on polyimide investigated by cross-sectional in situ transmission electron microscopy straining
    R.C. Oh Sang Ho
    Scripta Materialia, 456-459 (2011)
  • A methodology to study crystal plasticity inside a compression test sample based on image correlation and EBSD
    K.S. Rehrl Christian
    Materials Characterization, 793-800 (2011)
  • Fracture behaviour of tungsten-vanadium and tungsten-tantalum alloys and composites
    G.B. Wurster Stefan
    Journal of Nuclear Materials, 166-176 (2011)
  • A Mechanical Method for Preparing TEM Samples from Brittle Films on Compliant Substrates
    C.M.J. Taylor Aidan
    Praktische Metallographie, 408-413 (2011)
  • Effect of forming conditions on the softening behavior in coarse grained structures
    K.S. Rehrl Christian
    Materials Science and Engineering A, 6163-6172 (2011)
  • Towards predictive modeling of near-edge structures in electron energy-loss spectra of AIN-based ternary alloys
    R.R. Holec D.
    Physical Review B, 165122(1-10) (2011)
  • Recrystallization and Grain Growth in Ultrafine-Grained Materials Produced by High Pressure Torsion
    R.D. Khorashadizadeh Anahita
    Advanced Engineering Materials, 245-250 (2011)
  • Effect of specimen size on the tensile strength of WC-Co hard metal
    W.S. Klünsner Thomas
    Acta Materialia, 4244-4252 (2011)
  • Work hardening in micropillar compression: In situ experiments and modeling
    G.P.J. Kiener Daniel
    Acta Materialia, 3825-3840 (2011)
  • Die Sonne auf die Erde holen
    P.R. Wurster Stefan
    , 2 (2011)
  • Dynamic behavior of nanometer-scale amporphous intergranular film in silicon nitride by in situ high-resolution transmission electron microscopy
    S.W. Zhang Zaoli
    Journal of the European Ceramic Society, 1835-1840 (2011)
  • Recrystallization and Grain Growth in Ultrafine-Grained Materials Produced by High Pressure Torsion
    R.D. Khorashadizadeh Anahita
    Advanced Engineering Materials, 245-250 (2011)
  • Der Stoff, aus dem die Industrie gemacht wird
    S.R. Ebner Reinhold
    , 1 (2011)
  • Dislocation storage in single slip-oriented Cu micro-tensile samples: New insights via X-ray microdiffraction
    K.D. Kirchlechner Christoph
    Philosophical Magazine, 1256-1264 (2011)
  • Aspect ratio and stochastic effects in the plasticity of uniformly loaded micrometer-sized specimens
    W.D. Senger Jochen
    Acta Materialia, 2937-2947 (2011)
  • In situ Study of Cracking and Buckling of Chromium Films on PET Substrates
    L.W.-Y. Jin. H.
    Experimental Mechanics, 219-227 (2011)
  • Fracture toughness evaluation of ultrafine-grained nickel
    P.R. Hohenwarter Anton
    Scripta Materialia, 982-985 (2011)
  • Deformation mechanisms in micron-sized PST TiAl compression samples: Experiment and model
    F.F.D. Rester Martin
    Acta Materialia, 3410-3421 (2011)
  • Review on the EFDA programme on tungsten materials technology and science
    B.J.L. Rieth M.
    Journal of Nuclear Materials, 463-467 (2011)
  • In-situ TEM heating study of the γ lamellae formation inside the α2 matrix of a Ti-45Al-7.5Nb alloy
    C.H. Cha Limei
    Advanced Materials Research, 1365-1368 (2011)
  • On the mechanism of fatigue crack propagation in ductile metallic materials
    Z.C. Pippan Reinhard
    Fatigue & Fracture of Engineering Materials & Structures, 1-16 (2011)
  • Ultrasonic Evaluation of Severely Plastically Deformed Metals
    P.G. Kozhushko Victor V.
    Key Engineering Materials, 374-377 (2011)
  • Deformation mechanisms of a modified 316L austenitic steel subjected to high pressure torsion
    Z.Z. Scheriau Stephan
    Materials Science and Engineering A, 2776-2786 (2011)
  • Attenuation of ultrasound in severely plastically deformed nickel
    P.G. Kozhushko Victor V.
    NDT&E International, 261-266 (2011)
  • An Overview on the Fracture Behavior of Metals Processed by High Pressure Torsion
    P.R. Hohenwarter Anton
    Materials Science Forum, 671-676 (2011)
  • Effect of Impurities on the Microstructure of HPT Deformed Nickel
    P.R. Rathmayr Georg
    Materials Science Forum, 797-802 (2011)
  • Ultrafine Structure Formation in Aluminium Alloy Processed by HPT and the Mechanical Properties Response
    P.R. Zrnik Jozef
    Materials Science Forum, 903-908 (2011)
  • Microstructure and Properties of a Fe-Cu Composite Processed by HPT Powder Consolidation
    P.R. Bachmaier Andrea
    Materials Science Forum, 229-234 (2011)
  • Local and non-local behavior and coordinated buckling of CNT turfs
    B.D.F. Qiu A.
    Carbon, 1430-1438 (2011)
  • Source controlled yield and hardening of Cu(100) studied by in situ TEM
    M.A.M. Kiener Daniel
    Acta Materialia, 1328-1337 (2011)
  • Electrical properties and structure of grain boundaries in n-conducting BaTiO3 ceramics
    Z.Z. Hou Junbo
    Journal of the European Ceramic Society, 763-771 (2011)
  • Microstructure of Pure Ni Subjected to High Pressure Torsion
    H.X. Zhang H.W.
    Materials Science Forum, 529-534 (2011)
  • Recrystallization kinetics of ultrafine-grained Ni studied by dilatometry
    S.E.-M. Oberdorfer Bernd
    Journal of Alloys and Compounds, 309-311 (2011)
  • RCF and wear in theory and practice - The influence of rail grade on wear and RCF
    P.R. Stock Richard
    Wear, 125-133 (2011)
  • Effect of Large Shear Deformations on the Fracture Behavior of a Fully Pearlitic Steel
    T.A. Hohenwarter Anton
    Metallurgical and Materials Transactions, 1609-1618 (2011)

Master Thesis

Master Thesis

  • Einfluss der Hochverformung auf das Ermüdungsverhalten eines austenitischen Stahls
    O. Renk
    (2011)
  • Synchrotron X-Ray Nanobeam Experimente an CrN-Schichten zur Bestimmung von Mikrostrukturgradienten
    A. Gaitzenauer
    (2011)
  • Transmissionselektronenmikroskopische Untersuchungen der CrN/MgO Grenzfläche
    T. Harzer
    (2011)
  • Bruch- und Verformungsverhalten von ultrafeinkörnigem Titan
    B. Völker
    (2011)
  • Zyklische Plastizität an Microbiegeproben
    W.J. Grosinger
    (2011)