• 21.09.2006 , München
    D. Kiener
    Research topics at the Erich Schmid Institute Leoben
    Material and Interface Characterisation Kick-Off Workshop for Thermomechanical Simulation
  • 19.09.2006 , Ischia
    G. Guidoni
    Abrasion tests on human enamel under wet and dry conditions
    EST Workshop
  • 18.09.2006 , Hyannis, MA
    A. Tesch
    Short cracks initiated in Al 6013-T6 with the FIB-Technology
    International Conference on Fatigue Damage of Structural Materials VI
  • 18.09.2006 , Freiburg
    C. Motz
    Fracture properties of tungsten at the micro-meter scale
    3rd International Conference on Multiscale Materials Modeling
  • 15.09.2006 , Warsaw
    B. Schedler
    Methods to determine the joint strength of C/C to copper joints
    24th Symposium on Fusion Technology
  • 15.09.2006 , Berlin
    J. Keckes
    Residual stresses in thin films by diffraction: heading the absolute scale
    7th European Conference Residual Stresses ECRS7
  • 15.09.2006 , Parma
    O. Kolednik
    The prediction of the crack propagation direction according to the criterion of maximum energy dissipation
    International Conference on CRACK PATHS (CP 2006)
  • 15.09.2006 , Berlin
    E. Eiper
    Temperature dependence of residual stresses in thin films determined by the substrate curvature method
    7th European Conference Residual Stresses ECRS7
  • 15.09.2006 , Berlin
    Martinschitz, K.J.
    Stress factors and absolute residual stresses in thin films determined by the combination of curvature and sin<sup>2</sup>ψ methods
    7th European Conference Residual Stresses ECRS7
  • 11.09.2006 , Warsaw
    R. Lässer
    Structural material for DEMO: Development, testing and modelling
    24th Symposium on Fusion Technology
  • 07.09.2006 , Hückelhoven
    T. Schöberl
    Mechanical properties of biotools and their dependence on wet or dry state
    7th European Symposium on nano-mechanical testing
  • 07.09.2006 , Hückelhoven
    M. Rester
    Nanoindentation: deviations from the Nix-Gao model
    7th European Symposium on nano-mechanical testing
  • 07.09.2006 , Hückelhoven
    C. Motz
    Micron beam bending and compression tests - micromechanical properties of copper
    7th European Symposium on nano-mechanical testing
  • 07.09.2006 , Manchester
    M. Hafok
    Comparison of single crystalline and polycrystalline behavior under high pressure torsion
    Fundamentals of Deformation and Annealing
  • 01.09.2006 , Biarritz
    J. Keckes
    Structural changes in cyclically deformed cellulosics characterized by in situ synchrotron X-ray diffraction coupled with tensile tests
    12th European Conference on composite materials
  • 11.08.2006 , Denver
    B. Ortner
    Properties and general use of the X-ray elastic factors
    55th Annual Conference on Application of X-Ray Analysis
  • 09.08.2006 , Denver, Colorado
    J. Keckes
    Residual stresses in thin films characterized by the combination of sin<sup>2</sup>ψ and curvate methods: possibilities and limitations
    55th Annual Denver X-ray Conference, Denver
  • 09.08.2006 , Denver, Colorado
    K.J. Martinschitz
    A new tensile stage for in situ X-ray scattering experiments combined with mechanical tests
    55th Annual Denver X-ray Conference, Denver
  • 09.08.2006 , Denver, Colorado
    K.J. Martinschitz
    Texture changes in cyclically deformed cellulosics characterized by in-situ synchrotron diffraction coupled with tensile tests
    55th Annual Denver X-ray Conference, Denver
  • 09.08.2006 , Denver, Colorado
    Martinschitz, K.J.
    Rapid determination of stress factors and residual stresses in anisotropic thin films
    55th Annual Denver X-ray Conference, Denver
  • 09.08.2006 , Denver, Colorado
    Eiper, E.
    Size effect in metallic thin films characterized by low-temperature X-ray diffraction
    55th Annual Denver X-ray Conference, Denver
  • 09.08.2006 , Denver, Colorado
    R. Resel
    DHS1100 - A new high temperature attachment for multipurpose 4-circle X-ray goniometers
    55th Annual Denver X-ray Conference, Denver
  • 05.08.2006 , Waterville/Maine
    D. Kiener
    In-Situ compression tests on micron-sized copper pillars
    Gordon Research Conference on Thin Film and Small Scale Plasticity
  • 04.08.2006 , Waterville, Maine
    Eiper, E.
    Size effect in metallic thin films characterized by low-temperature X-ray diffraction
    Gordon Research Conference on thin film & smal scale mechanical behavior
  • 04.08.2006 , Waterville, Maine
    K.J. Martinschitz
    Cyclically deformed cellulose films characterized by in situ synchrotron diffraction coupled with tensile tests
    Gordon Research Conference on thin film & smal scale mechanical behavior
  • 04.08.2006 , Waterville, Maine
    Martinschitz, K.J.
    Residual stresses and strains in thin films characterized by the combination of sin<sup>2</sup>ψ and substrate curvature methods
    Gordon Research Conference on thin film & smal scale mechanical behavior
  • 30.07.2006 , Maine
    S. Massl
    A cantilever method to determine depth profiles of residual stresses on the nanoscale
    Gordon Research Conference
  • 20.07.2006 , Waterville
    S.H. Oh
    In-situ TEM tensile testing of thin Au films: A transition in deformation mechanism
    Gordon Tagung Thin Film & Small Scale Mechanical Behavior
  • 20.07.2006 , Waterville
    C. Motz
    Fracture behaviour and fracture properties of tungsten on the micrometer scale
    Gordon Tagung Thin Film & Small Scale Mechanical Behavior
  • 18.07.2006 , Halifax, Nova Scotia
    G. Cailletaud
    Multicrystal Large Strain Computations - Comparison with Strain Field Measurements
    12th International Symposium on Plasticity and its Applications
  • 07.07.2006 , Alexandroupolis
    J. Pascual
    Weight function, J-integral and material forces approach to ceramic multilayers
    16th European Conference of Fracture
  • 07.07.2006 , Alexandroupolis
    M. Faleschini
    Fracture toughness investigations of severe plastic deformed tungsten alloys
    16th European Conference of Fracture
  • 06.07.2006 , Alexandroupolis
    C.R. Chen
    Cohesive-zone modeling of crack-growth in specimens with different constraint conditions
    16th European Conference of Fracture
  • 06.07.2006 , Alexandroupolis
    K. Srinivasan
    A micro-toughness model for ductile fracture incorporatingvoid size effects
    16th European Conference of Fracture
  • 05.07.2006 , Alexandroupolis
    G. Trattnig
    Damage evolution in torsion specimens deformed at forging temperatures
    16th European Conference of Fracture
  • 05.07.2006 , Alexandroupolis
    G. Jesner
    Fatigue and fracture processes in high performance PM tool steels
    16th European Conference of Fracture
  • 04.07.2006 , Alexandroupolis
    O. Kolednik
    Crack initiation and fracture of metal matrix composites
    16th European Conference of Fracture
  • 04.07.2006 , Alexandroupolis
    J. Predan
    Local variation of crack driving force in a mismatched weld
    16th European Conference of Fracture
  • 03.07.2006 , Alexandroupolis
    F. Wetscher
    Fatigue and fracture processes in severe plastic deformed rail steels
    16th European Conference of Fracture
  • 03.07.2006 , Alexandroupolis
    Pippan, R.
    A discussion of the applicability of DK-Values for short cracks
    16th European Conference of Fracture
  • 29.06.2006 , Berlin
    G. Guidoni
    Biomaterials' soup
    Biosystems Conference
  • 28.06.2006 , Kragujevac
    M. Rakin
    Numerical analysis of residual stresses effect on elastically inhomogenous bimaterial with crack
    1st South-East European Conference on Computational Mechanics, SEECCM-06, eds., M. Kojic, M. Papadrakakis
  • 27.06.2006 , Graz
    R. Pippan
    Sind submikrokristalline oder nanokristalline metallische Werkstoffe für den Automobilbau interessant?
    Nano Mobil - Nanotechnologie und Nanomaterialien im Automobil
  • 26.06.2006 , Göttingen
    G. Dehm
    Größeneffekte in miniaturisierten Materialien: neue Methoden - neue Einblicke?
    Physikkolloquium Universität Göttingen
  • 23.06.2006 , Collioure
    M. Moser
    Materials analysis of space retrieved materials from the hubble space telescope
    10th International Symposium on "Materials in a Space Environment" ISMSE
  • 01.06.2006 , Dresden
    R. Pippan
    Mechanische Untersuchungen im Mikrometer- und Submikrometerbereich
    Institutsseminar
  • 24.05.2006 , Leoben
    S. Marsoner
    Entwicklungsstand und Nutzen der FEM-Simulation von Massivumformprozessen
    Asmet - Forum für Metallurgie und Werkstofftechnik
  • 23.05.2006 , Leoben
    G. Jesner
    Ermüdungsrissinitiation und Ermüdungsrisswachstumsverhalten in hochfesten PM-Werkzeugstählen
    Asmet - Forum für Metallurgie und Werkstofftechnik
  • 22.05.2006 , Leoben
    S. Scheriau
    Influence of Grain Size on Orientation Changex during Plastic Deformation
    ASMET-Forum 2006
  • 22.05.2006 , Leoben
    E. Eisenberger
    Gefüge und mechanische Eigenschaften eines C/C-Kupfer-Verbundwerkstoffes für Fusionsreaktoren
    Asmet - Forum für Metallurgie und Werkstofftechnik