Univ. Prof. Dr.-Ing. habil. Dr. h.c. Jürgen Eckert

Function: Director / Chair of Materials Physics of the University of Leoben
Room: 109
Phone: +43 (0) 3842-804-109




Wissenschaftliche Arbeiten in der Materialphysik, Materialphysik II, Forschungsarbeiten auf dem Gebiet der Materialphysik




  • High pressure torsion induced lowering of Young's modulus in high strength TNZT alloy for bio-implant applications
    T. Maity, O. Balci, C. Gammer, E. Ivanov, J. Eckert, K.G. Prashanth
    J. Mech. Behav. Biomed. Mater.108, UNSP 103839 (2020)
  • Premature failure of an additively manufactured material
    Z. Wang, M.: Xie, Y. Li, W. Zhang, C. Yang, L. Kollo, J. Eckert, K. Prashanth
    NPG Asia Mater.12, ARTN 30 (2020)
  • Study of thermal and structural characteristics of mechanically milled nanostructured Al-Cu-Fe quasicrystals
    R. Ali, M. Akhtar, A. Zahoor, F. Ali, S. Scudino, R. Shahid, N. Tariq, V. Srivatava, V. Uhlenwinkel, B. Hasan, J. Eckert
    Materials Chemistry and Physics251, ARTN 123071 (2020)
  • Thermal expansion behavior of Al-xSi alloys fabricated using selective laser melting
    Y. Jia, L. Zhang, P. Ma, S. Scudino, G. Wang, J. Yi, J. Eckert, K. Prashanth
    Progress in Additive Manufacturing2020, 247-257 (2020)
  • Oligoether Ester-Functionalized ProDOT Copolymers on Si/Monolayer Graphene as Capacitive Thin Film Electrodes
    T. Karazehir, B. Sarac, H. Gilsing, J. Eckert, S. Sarac
    J. Electrochem. Soc.167, ARTN 070543 (2020)
  • Metal flow behavior of P/M connecting rod preform in flashless forging based on isothermal compression and numerical simulation
    F. Li, P. Chen, J. Han, L. Deng, J. Yi, Y. Liu, J. Eckert
    J. Mater. Res. Technol-JMRT9, 1200-1209 (2020)
  • Soft Ferromagnetic Bulk Metallic glass with Potential Self-Healing Ability
    P. Ramasamy, M. Stoica, G. Ababei, N. Lupu, J. Eckert
    materials2020, ARTN 1319 (2020)
  • Strain perceptibility of elements on the diffusion in Zr-based amorphous alloys
    A.Y. Lee, S.Y. Kim, H. Jang, Y.D. Kim, F. Spieckermann, G. Wilde, J. Eckert, M.H. Lee
    Sci Rep10, ARTN 4575 (2020)
  • Transformation-enhanced strength and ductility in a FeCoCrNiMn dual phase high-entropy alloy
    T. Zhang, R. Zhao, F. Wu, S. Lin, S. Jiang, Y. Huang, S. Chen, J. Eckert
    Materials Science & Engineering A780, ARTN 139182 (2020)
  • Outstanding strengthening behavior and dynamic mechanical properties of in-situ Al-Al3Ni composites by Cu addition
    J. Kim, V. Soprunyuk, N. Chawake, Y. Zheng, F. Spieckermann, S. Hong, K. Kim, J. Eckert
    Composites Part B189, ARTN 107891 (2020)